MAC Viper Specification Sheet

MAC Viper Profile TM
The MAC Viper Profile is a new breed of high-output profile
luminaire with an exceptional feature set and highly efficient
optical system that outperforms market-leading profiles in the
1200-watt range. Its 1000-watt HID source is convincingly
brighter than 1200-watt fixtures and the MAC Viper Profile also
outperforms them in terms of speed and compactness. Power
consumption is lower and output is approximately 55% more
· 26000 lumens Excellent light quality with a very flat and uniform field
· 1:5 zoom Fast zoom with auto-linked focus
· Fat beam front lens The 140 mm front lens exceeds the size of any other fixture in this segment for just
the right fat beam look
· 5 + 5 rotating gobos All glass gobos with optimal focal separation for superior morphing effects
· FX wheel Patent-pending FX wheel provides an additional 4 fixed gobos and 135° animation effect
· CMY Vibrant color mixing with a superior palette of colors including true reds, rich ambers, primary green
and deep blues
· 8-slot color wheel Fixed colors for added color choice
· Linear CTO Daylight to tungsten CCT control and expansion of the CMY palette
· Dimmer and shutter - Combined dimmer/shutter system with intensity effects, instant blackout/open and
smooth fades
· Iris Fast and tight iris with adjustable dynamic effects
· Strobe Diverse strobe effects using mechanical or electronic control or in combination
· Soft frost A light frost leaves gobo artwork visible with a beautiful soft edge. Includes a linear focus blurring
· 4-facet prism
Dynamic Effects
Real beam separation with rotation and index control for dynamic effects and accurate tiling
Length (Head): 566 mm (22.3 in.)
Width: 472 mm (18.6 in.)
Width (Base): 335 mm (13.2 in.)
Height (head straight up): 731 mm (28.8 in.)
Height (maximum): 748 mm (29.4 in.)
Weight: 36 kg (79.4 lbs.)
Approved lamp: Osram HTI 1000/PS Lok-it
Type: 1000 W short-arc discharge
Color temperature: 6000 K
CRI (Color rendering index): >85
Average lifetime: 750 hours
Socket: PGJ28 Lok-it
Ballast: Electronic
Color mixing: CMY, independently variable 0 - 100%
Color temperature control: CTO, variable 6000 - 3200 K
Color wheel: 8 interchangeable dichroic filters + open, indexing, continuous rotation, random color
Aerial wheel: 5 interchangeable aerial effects + open, indexing, continuous rotation and shake
Breakup wheel: 5 interchangeable texture/breakup gobos + open, indexing, continuous rotation and shake
FX wheel: Interchangeable static gobo and gobo animation effects
Prism: Interchangeable 4-facet rotating prism
Iris: 0 - 100%, pulse effects
Frost: Frost filter
Olof Palmes Allé 18
8200 Århus N
Tel. +45 87 40 00 00
Fax +45 87 40 00 10
MAC Viper Profile TM
Mechanical dimmer/shutter: 0 - 100% continuous dimming, variable & random strobe & pulse effects, instant open &
Dimming options: Choice of four dimming curves
Focus: Range varies with zoom angle, from 2 m (6.6 ft.) / 6 m (19.7 ft.) to infinity (approx.)
Zoom: 10° - 44°
Zoom-focus linking system: 3-zone
Pan: 540°
Tilt: 268°
Position correction system: Absolute position monitoring
Control and Programming
Service Utilities
Typical Power and Current
DMX channels: 26/34
Setting and addressing: Control panel with backlit graphic display and jog wheel or via DMX
16-bit control: Aerial, breakup and texture effect rotation and indexing, focus, zoom, pan and tilt
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20
Receiver: Opto-isolated RS-485
Firmware update: USB memory device or USB/DMX hardware interface over DMX link
Fixture identification: User-settable fixture ID number
Color(s): Black
Housing: UV-resistant fiber-reinforced composite
Reflector: Glass, cold light
Protection rating: IP20
Size: E27 (Size E, max. image diameter 27 mm)
Approved material: Borosilicate 3.3 or better with dichroic or heavy matted aluminum coating (metal gobos not approved)
Outside diameter: 37.5 mm (1.5 in.) +0/- 0.2 mm (0.01 in.)
Maximum image diameter: 27 mm (1.1 in.)
Maximum thickness: 1.1 mm (0.04 in.) +/- 0.1 mm (0.004 in.)
Mounting points: Eight quarter-turn locking points
Orientation: Any
Minimum distance to illuminated surfaces: 1.6 m (5.2 ft.)
Minimum distance to combustible materials: 0.3 m (1.0 ft.)
AC power input: Neutrik PowerCon
DMX and RDM data in/out: 5-pin locking XLR
USB memory devices: USB host socket
AC power: 120-240 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch-mode
Typical half-cycle RMS inrush current: 16.2 A
120 V, 60 Hz: 1225 W, 10.3 A, PF 0.999
208 V, 60 Hz: 1190 W, 5.8 A, PF 0.996
230 V, 50 Hz: 1186 W, 5.2 A, PF 0.994
240 V, 50 Hz: 1194 W, 5.0 A, PF 0.993
Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
PF = power factor
Cooling: Filtered forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 5° C (41° F)
Maximum surface temperature, steady state, Ta=40° C (104° F): 150° C (302° F)
Total heat dissipation (calculated, +/- 10% at 120 V, 60 Hz): 4180 BTU/hr
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471
EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61547
US safety: UL 1573
US EMC: FCC Part 15 Class A
Canadian safety: CSA E598-2-17 (CSA E60598-1)
Olof Palmes Allé 18
8200 Århus N
Tel. +45 87 40 00 00
Fax +45 87 40 00 10
MAC Viper Profile TM
Canadian EMC: ICES-003 Class A
Australia/NZ: C-TICK N4241
Included Items
Related Items
Spare Parts
Lamp (installed): P/N 97010346
Two Omega clamp attachment brackets with 1/4-turn fasteners: P/N 91602001
Safety and installation manual: P/N 35000258
Power cable, AWG12, SJT, with Neutrik PowerCon NAC3FCA input connector, 3 m (9.8
ft.): P/N 11541503
Neutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804
Omega clamp attachment bracket with 1/4-turn fasteners: P/N 91602001
T-shaped omega clamp attachment bracket with 1/4-turn fasteners: P/N 91602008
Half-coupler clamp: P/N 91602005
G-clamp (suspension with yoke vertically downwards only): P/N 91602003
Quick-trigger clamp (suspension with yoke vertically downwards only): P/N 91602007
Safety wire, safe working load 50 kg (110.2 lbs.): P/N 91604003
Flightcase for 2 x MAC Viper: P/N 91510180
Martin USB Duo TM DMX Interface Box: P/N 90703010
Martin RDM 5.5 Splitter TM : P/N 90758150
Replacement lamp: P/N 97010346
Head air filter
Ordering Information
MAC Viper TM Profile in cardboard box: P/N 90233000
MAC Viper TM Profile in double flightcase: P/N 90233010
Shipping Information
In cardboard carton
Shipping dimensions (LxWxH): TBA
Shipping weight: TBA
Quantity on pallet: TBA
Pallet dimensions (LxWxH): TBA
Pallet volume: TBA
Pallet weight (incl. pallet): TBA
In flightcase
Shipping dimensions (LxWxH): TBA
Shipping weight: TBA
Quantity on pallet: TBA
Pallet dimensions (LxWxH): TBA
Pallet volume: TBA
Pallet weight (incl. pallet): TBA
Published on: 17 Aug 2012. © 2012 Martin Professional A/S. Specifications subject to change without notice
Olof Palmes Allé 18
8200 Århus N
Tel. +45 87 40 00 00
Fax +45 87 40 00 10