Data Sheet - SANbox 9000 Series

Data Sheet - SANbox 9000 Series
D ata s h e e t
Now Available!
SANbox 9000
Series Director
®
Designed to the Core for Open
Systems
FT CPU Failover and HyperStack™
™
Finally, there’s a new class of core switch that represents a
sane alternative to quarter million dollar Director switches. The
SANbox 9000 Series is Designed to the Core for cost sensitive,
business-critical, open system environments that require ultrahigh density, blazing performance, support for solutions with
availability of 99.999% in an intelligent switch platform for their
data center core. The SANbox 9000 series represents a number
of industry firsts: a stackable chassis for simple, cost-effective scalability, a 4U chassis for smaller footprint, the simplicity
and economies of Customer Replaceable Units (CRUs) and a
comprehensive set of core switch software management tools
included as standard. Best of all, pricing starts at under $100K.
The highly scalable SANbox 9000 is a stackable chassis switch
with a dedicated 800Gb/s HyperStack™ connection between as
many as two chassis modules. The high port count SANbox
9000 supports up to 256 ports in a dual chassis configuration.
The intelligent SANbox 9000 offers in one chassis module:
8 slots for any mix of 4Gb or 10Gb Fibre Channel I/O Blades,
iSCSI/FCIP Intelligent Storage Router I/O Blades1, or Storage
Services Platform (SSP) Blades2. For high availability, the SANbox 9000 features redundant / hot-swap I/O, CPU, power supply
and fan blades. And for comprehensive fabric management,
the SANbox 9000 includes a powerful and easy-to-use suite of
software tools for setting-up, monitoring, tuning, troubleshooting and servicing an unlimited number of large fabrics.
Key Features and Benefits
ULTRA-HIGH DENSITY AND STACKABLE SCALABILITY
• At twice the port density of typical 14U Director switches,
the SANbox 9000 stackable chassis switch scales to 128
ports in a 4U single chassis module or up to 256 ports in an
8U dual chassis module HyperStack configuration (via backplane interconnects) – 32 ports per 1U of rack space!
• Unlike legacy Director switches, the SANbox 9000 switch
provides a low cost entry point with a 16 4Gb Fibre Channel port configuration.
Seamlessly grow your SANbox 9000 switch in 16 port increments up to 256 ports.
• Eight I/O Blade slots per chassis module supporting multi-protocol and multi-function technologies including:
- 4 Gb FC I/O Blade: for maximum server and storage connectivity.
- 10Gb FC I/O Blade: high-speed Inter-Switch Links (ISLs) including trunking between other Core, Distribution and Edge Class switches.
- Intelligent Storage Router Blade2: iSCSI for connecting low cost servers and FCIP
for replicating data across a WAN.
- Storage Services Platform “SSP” Blade2: pool heterogeneous storage.
• Broadly deployable in local, campus, distributed and remote Core/Distribution/Edge
configuration topologies.
• ENTRY Model SB9100 fully upgradable in the field to single or dual HyperStack BASE
Model SB9200.
BLAZING PERFORMANCE
• Non-blocking, full-duplex bandwidth at 800Gbps in a single chassis module or a massive
1.6Tbps for a dual module HyperStack configuration (64 10Gb or 256 4Gb FC ports) to enable
High Performance Computing, Video and Satellite Capture data streaming applications.
• Industry’s lowest latency and “No-Wait” routing for maximum transaction performance via powerful embedded CPU and I/O Blade ASICs.
CUSTOMER REPLACEABLE UNITS (CRUs)
•The industry’s first stackable chassis switch designed for the convenience, simplicity
and economies of Customer Replaceable Units (CRUs) for key components.
• Redundant, hot-pluggable CPU, Power Supply, Fan and I/O Blades, Non-Disruptive
Code Load and Activation (NDCLA) and non-disruptive CPU failover in support of
24x7 mission-critical operations that require 99.999% availability.
LOW TOTAL COST OF OWNERSHIP
• All the benefits of a Director Class switch with revolutionary pricing that starts
under $100K.
• Architected for long-term investment flexibility and protection to deliver a previously
unachievable reduction in Total Cost of Ownership (TCO).
• For SAN administrators that have invested in multi-vendor fabrics, the SANbox 9000 is
interoperable with all FC-SW-2 compliant Fibre Channel Director, Distribution and Edge
Class switches as well as with popular servers, storage and networking products from
major manufacturers.
• Minimize management costs with easy-to-use and comprehensive Command Line
Interface (CLI), QuickTools™ embedded web interface, and Enterprise Fabric Suite™
2007 software tools included with every SANbox 9000 switch.
D ata s h e e t
SANbox 9000 Series
Designed to the Core ™ for Open Systems
Datacenter managers in mainframe environments are responsible for connecting large numbers of servers and storage systems. They pay a premium for servers, storage and Director switches that support proprietary mainframe
protocols.
Datacenter managers in open systems environments want high availability, high performance and scalability too.
However, they expect products built on open standards to be substantially more cost effective: less complex, more
flexible, easier to use.
Reliable, fast, modular, and incredibly cost effective, the QLogic SANbox line of fabric switches, routers, and storage
services platforms are Designed to the Core for the open enterprise.
Open Systems Enterprise
.
With hundreds of ports, support for solutions that require 99.999% availability, 1.6Tb of bandwidth, intelligent
storage routing and storage virtualization, the QLogic SANbox 9000 is Designed to the Core for the open
systems enterprise.
D ata s h e e t
SANbox 9000 Series
SANbox® Product Family
The new look for powerful, easy to manage fabrics
The SANbox 9000 is the flagship in the SANbox line of fabric switches, intelligent storage routers, and storage
services platforms. As individual components, every QLogic SANbox delivers the advantages of a best-in-class
product. Working together as an intelligent network solution, they are easy to deploy and administrator and they
make your SAN perform better, too. That’s why the entire QLogic SANbox line won the Windows® IT Pro “Readers
Choice” award. For your switched fabric, you can count on QLogic for exactly the right switch…from the core, to the
distribution layer, to the edge. For low-cost local and remote server connectivity, QLogic Intelligent Storage Routers
boost utilization while driving down cost and complexity. And for storage virtualization, the QLogic Storage Services
Platform offers network-based command and control of your heterogeneous storage. By virtualizing storage from
within the fabric, you greatly simplify management. More importantly, you ensure an open environment that can
accommodate multiple vendors, new solutions and future flexibility.
SANbox ®
The new look for powerful, easy to manage fabrics
• SANbox 9000 Stackable Chassis Switch
• SANbox 8000 Storage Services Platform
• SANbox 6000 Intelligent Storage Router
• SANbox 5000 Stackable Switch
• SANbox 1000 Fixed Port Switch
D ata s h e e t
SANbox 9000 Series
SANbox® 9000 Product Overview
HyperStack™ Architecture
The SANbox 9000 Series stackable chassis switch is a new
class of core switch that enables solutions with 99.999%
availability, blazing performance and multi-function/multiprotocol intelligence of a Director – but without the large
footprint and high Total Cost of Ownership (TCO).
What makes it all possible is the SANbox 9000 architecture
that features:
HyperStack – Four 200Gb dedicated
backplane interconnects
between chassis modules
High Bandwidth Chassis – 1.6Tb of bandwidth for a dual chassis HyperStack configuration
Redundancy – Redundant CPU, power supply and fan blades
Compact – Up to 128 ports in only 4U of rack space, 256 ports in 8U-HyperStack
HyperStack™
CPU
CPU
CPU
CPU
BLADE
BLADE
BLADE
BLADE
BLADE
BLADE
BLADE
BLADE
BLADE
BLADE
BLADE
BLADE
BLADE
BLADE
BLADE
BLADE
CHASSIS MODULE
CHASSIS MODULE
The SANbox 9000 architecture is redundant for high availability, delivers 1.6Tb of bandwidth and allows chassis
modules to scale via innovative HyperStack™ technology.
D ata s h e e t
SANbox 9000 Series
Stackable Chassis Switch
For unprecedented scalability, the 8-slot SANbox 9000 chassis is uniquely modular in two dimensions. Like a Director
switch, I/O and SSP blades can be added as needed. Unlike a Director, the SANbox 9000 chassis is itself a module.
Using HyperStack™ technology pioneered by QLogic, a second chassis can be inter-connected when needed and managed as a single switch.
For high availability, the SANbox 9000 features redundant, hot swap, Customer Replaceable Units (CRUs), including
CPU, power supply and fan blades.
From the front of the SANbox 9000 chassis module, up to 8 customer serviceable
I/O and SSP blades can be added or replaced non-disruptively without tools.
From the rear of the SANbox 9000 chassis
module, customer replaceable CPU, power
supply and fan blades are hot-swappable.
I/O and Storage Services Platform (SSP) Blades
Each modular SANbox 9000 chassis features 8 slots for any mix of 4Gb or 10Gb Fibre Channel I/O Blades, iSCSI/FCIP
Intelligent Storage Router I/O Blades2, or Storage Services Platform Blades2.
16-port 4/2/1 Gb
FC Blade
4-port 10 Gb
FC Blade
2-port GE
+ 8-Port FC
iSCSI/FCIP Blade
Storage
Services
Platform
SSP Blade
The SANbox 9000 stackable chassis switch features multi-function and multi-protocol intermix flexibility of a Director.
D ata s h e e t
SANbox 9000 Series
I/O and Storage Services Platform (SSP) Blades
4Gb FC I/O Blade - 16 Ports x 4Gb Fibre Channel
The 4Gb FC blade includes sixteen 4Gb/2Gb/1Gb auto-sensing
Fibre Channel ports. Configure all eight SANbox 9000 slots with
4Gb FC blades for a maximum port density of 128 ports per chassis module.
10Gb FC I/O Blade - 4 Ports x 10Gb Fibre Channel
The 10Gb FC blade includes four 10Gb Fibre Channel ports. Configure SANbox 9000 slots with 10Gb FC blades for high-speed ISL connectivity from the core to the distribution or edge tiers with SANbox
5000 stackable switches.
iSCSI/FCIP I/O Blade2 - 2 Ports x 1 Gigabit Ethernet + 8 ports x 4Gb
Fibre Channel
The iSCSI/FCIP blade includes two 1Gb Ethernet ports plus eight 4Gb/
2Gb/1Gb auto-sensing Fibre Channel ports. Configure SANbox 9000
slots with iSCSI/FCIP blades for connectivity from the core to remote
sites over a WAN for long distance data replication, including data compression and SmartWrite® performance acceleration.
D ata s h e e t
SANbox 9000 Series
Fabric Management Software
With wizard-based installation and configuration tools, the
SANbox 9000 stackable chassis switch is the easiest-to-
Performance
Monitoring
Fabric
Management
Installation
Distance
SANbox 9000
Performance
Management
Monitoring
Tools
Throughput
Fabric
Monitoring
Security
Diagnostics
install and easiest-to-manage core switch on the planet.
But for large fabrics where management becomes complicated, the SANbox 9000 series includes a comprehensive
and powerful suite of management tools.
For point-and-click management, the tools are accessible from a user-friendly graphical user interface. And for the SAN experts, a comprehensive
Command Line Interface (CLI) is available. Plus,
integration with your favorite 3rd party applications
is made easy with the QLogic SANbox APIs, or the
industry compliant SMI-S 1.1 agent. Performance
Monitoring
Fabric
Management
QuickTools™ is an embedded Java® web applet for
Installation
device discovery, device management, zoning, and
fabric management. A configuration wizard walks users through switch setup and configuration. A zoning
wizard provides simple drag-and-drop zoning with fast
Distance
SANbox 9000
Performance
Management
Monitoring
Tools
Throughput
Fabric
Monitoring
Security
Diagnostics
Performance
Monitoring
Fabric
Management
Installation
activation to get the switch ready for immediate use.
Enterprise Fabric Suite 2007 ™ is a suite of tools for
setup, configuration, zoning, fabric management, fabric
monitoring, performance monitoring and configuring
extended distance capability. Enterprise Fabric Suite
Distance
Fabric
Monitoring
SANbox 9000
Performance
Management
Monitoring
Tools
Throughput
Security
Diagnostics
2007 can manage an unlimited number of switches and
fabrics from a single console.
D ata s h e e t
SANbox 9000 Series
Performance
Monitoring
Fabric
Management
Installation
Distance
SANbox 9000
Performance
Management
Monitoring
Tools
Throughput
Fabric
Monitoring
Security
Diagnostics
Performance
Monitoring
Fabric
Management
Installation
Adaptive Trunking guarantees extremely high performance while eliminating the need to manually configure
and maintain ISL aggregation groups. Effective ISL routing and utilization is essential to achieving ROI in mid- to
large-scale SANs. QLogic’s Adaptive Trunking comes
standard with all SANbox 9000 series switches.
Fabric Security offers the right mix of protection features
for user security, connection security and device security.
RADIUS authentication is supported so that separate usernames and passwords don’t have to be managed. The data
Distance
SANbox 9000
Performance
Management
Monitoring
Tools
path for switch management communication is encrypted
Throughput
using Secure SHell (SSH) for the CLI and Secure Socket
Layer (SSL) for Enterprise Fabric Suite 2007, QuickTools,
and SMI-S. Users can setup device connection security to
control what devices have access to the switch. ISL and
Fabric
Monitoring
Security
Diagnostics
port authentication is achieved using Fibre Channel Security Protocol (FC-SP) and DH-CHAP. Additional device
authentication is performed using FC-GS-4 CT.
Performance
Monitoring
Fabric
Management
Installation
SANdoctor ™ provides a comprehensive set of diagnostic tools for troubleshooting fabric problems. Fibre
Channel (FC) Ping verifies that a functional path exists between two ports. FC Trace Route displays path
Distance
SANbox 9000
Performance
Management
Monitoring
Tools
information between a source and a destination. DigiThroughput
tal Diagnostics Monitoring displays SFP, X2 and XPAK
transceiver data in order to determine if variables are
within operational limits.
Fabric
Monitoring
Security
Diagnostics
D ata s h e e t
Technical Specifications
FABRIC SPECIFICATIONS
Fibre Channel Protocols
• Physical Interface (FC-PI-3)
• Line Services (FC-LS)
• Framing & Signaling (FC-FS-2)
• Generic Services (FC-GS/FC-GS-2/FC-GS-3/FCGS-4/FC-GS-5)
• Switch Fabric (FC-SW-2/FC-SW-3/FC-SW-4),
except for enhanced zoning
• Arbitrated Loop Rev. 4.6 (FC-AL)
• Arbitrated Loop-2 Rev. 7.0 (FC-AL-2)
• Fibre Loop Attachment (FC-FLA)
• Tape Technical Report (FC-Tape)
• Virtual Interface Architecture Mapping (FC-VI)
• Fabric Element MIB Specification (RFC 2837)
• Fibre Alliance MIB Specification (Version 4.0)
• Methodologies for Interconnects (FC-MI-2)
• Device Attach (FC-DA)
• Security Protocols (FC-SP)
Fibre Channel Classes of Service
• Class 2, Class 3, and Class F (inter-switch frames)
connectionless Fibre Channel protocol support
Modes of Operation
• Fabric
• Public loop
• Broadcast
PERFORMANCE FEATURES
Fabric Port Speed
• FC4G16 I/O Blades @ 1.0625, 2.2125, & 4.250 Gbps
- Auto sensing of 1, 2, & 4 Gbps port speeds
-O
ptionally programmable to fixed port speed
• FC10G4 I/O Blades @ 12.75 Gbps
• FCIP/iSCSI I/O Blades @ 1.0 Gbps Fixed Rate 1
FC Fabric Latency (Best Case)
• <0.6µsec @ 1-Gbps
• <0.4µsec @ 2-Gbps
• <0.3µsec @ 4-Gbps
• <0.2µsec @ 10-Gbps
• Cut-through routing
FC Fabric Point-to-Point Bandwidth
• 212MB/s Full-Duplex on 1Gb ports
• 424MB/s Full-Duplex on 2Gb ports
• 850MB/s Full-Duplex on 4Gb ports
• 2550 MB/s Full-Duplex on 10Gb ports
FC Fabric Aggregate Bandwidth
• SANbox 9100 Model – 408 Gbps, full duplex
• SANbox 9200 Model – 816 Gbps, full duplex
• 2X SANbox 9200 Model HyperStack – 1.632 Tbps,
full duplex
• Non-blocking HyperStack™ architecture
Maximum Frame Sizes
• 2148 bytes (2112 byte payload)
• In-order delivery assured within OX-ID
Per-port Buffering
• ASIC-embedded memory (non-shared)
• Each port has a guaranteed 16-credit zero wait
state buffer for full performance up to 13km @
2Gb and 2Km @ 10Gb
• Buffer credit donor support via software GUI
wizard to extend distance with full performance
as shown in the Extended Distance Donor Buffer Credit Allocation table on page 11
Inter-Switch Link (ISL) Trunking
• Supports aggregation of up to 128 ISLs in one or
more trunks between multiple switches in any
port speed combination and across multiple I/O
Blades
- 10Gb recommended to maximize number
of usable 4/2/1Gb Server/Storage ports on
both SANbox 5000 Series and 9000 Series
switches
• Switch-On-Exchange (SOE) mode for dynamic
ISL trunk load balancing to maximize throughput
- Assured in-order delivery of frames in all
multi-switch and multi-ISL trunked configurations
- Adaptive Trunking to improve efficiency via
optimal routing across multiple trunk groups
- Intelligent Path Selection (IPS) on all 10Gbps
and 4/2/1Gbps ISL trunk ports
• Automatic configuration of ISL trunks including
multi-hop paths between multiple switches
- Supports all multi-switch fabric topologies
including stack, cascade, cascaded loop, and
mesh
- Adaptive Trunking to improve efficiency via
optimal routing across multiple trunk groups
- Up to 239 switches depending on configuration
• Non-disruptive dynamic addition of ISLs to an
existing trunk
• High availability with automatic path failover
• Interop mode support: McDATA Open Mode,
Brocade interopMode 1, Cisco Open Mode
System Processor
• 800 MHz PowerPC processor
I/O Blade Processor
• 400 MHz PowerPC processor
MODULAR SCALABILITY
Ports Per Chassis Module
• 16 to 128 FC 4/2/1 Gbps ports
• 4 to 32 FC 10 Gbps ports
• 2 to 16 IP 1Gbps iSCSI or FCIP ports 1
• Full Blade intermix support, maximum 8 Blades,
all Blades hot-pluggable
• >475,000 user ports depending on configuration
Ports Per Rack
• Up to 1,280 ports per 42U rack
Chassis Module HyperStack
• Two BASE Model SB9200 chassis modules via 4
proprietary HyperStack cables
- Two domains
- Up to 256 Fibre Channel 4/2/1 Gbps ports
Multi-switch Fabrics
• Supports all topologies, including: stack, cascade,
cascaded loop, and mesh
• Maximum 239 switches (domain IDs) depending on
configuration
Fabric Port Types
• All ports are universal, auto-discovering, selfconfiguring and can assume the following
states:
- F_Port: Fabric (N_Port Id Virtualization [NPIV]
support automatically enabled) with up to
255 NPIVs per port
- FL_Port: Fabric loop (public loop)
- E_Port: Switch-to-switch
Administrative Port Types
- G_Port: Generic
- GL_Port: Generic loop
Port Security
• Port binding via list of WWNs (up to 32) allowed
access to a port
• ISL and port authentication via Fibre Channel
Security Protocol (FC-SP) and DH-CHAP
Port Statistics
• Configuration and operational data
• Transmitted and received frame counts
• Transmitted and received error counts
Media Type (Ordered Separately)
• Hot-pluggable, industry-standard 3.3 volt SFPs
(Small Form Pluggable) for 4/2/1Gb ports
• Hot-pluggable, industry-standard X2 optical
transceivers or X2 copper ISL cables for 10Gb
ports
Supported SFP Transceiver Types
• Short Wave (optical)
• Long Wave (optical)
• Active/Passive Copper (4/2Gb)
Supported X2 Transceiver Types
• Short Wave (optical)
• Long Wave (optical)
Media Transmission Ranges (@ 10Gbps speeds)
• Optical Media
- Short Wave: 300 m (984 ft.)
- Long Wave: 8.34 km (5.18 miles)
Optical Cable Types (4Gb & 10Gb)
• 50/62.5 micron multimode fiber optic
• 9 micron single-mode fiber optic
D ata s h e e t
Technical Specifications
INTEROPERABILITY/CERTIFICATIONS
• Fully interoperable with all QLogic SANbox switch
products
• Compatible with FC-SW-2 compliant switches,
including Brocade, Cisco & McDATA
• Management interoperability with leading SAN
management applications
• FCIA SANmark and SNIA SMI-S certified
- SCD-3001v2a1 (E_Port)
- SCD-3002v2 (FL_Port)
- SCD-3010v1 (RSCN)
- SCD-3020v1 (Zoning)
• Certified with leading SAN hardware and software vendors. Visit http://www.qlogic.com/
interopguide for a comprehensive listing
FABRIC SERVICES
Software Releases
• QuickTools version 6.03.04 or later
• Enterprise Fabric Suite 2007 version 6.03.04
or later
• Switch Firmware version 6.2.1.06 or later
Ethernet Connections
• CPU Blade: RJ-45 Ethernet Connector on each
CPU Blade on back of chassis module
• Maintenance Panel: Two alternate RJ-45 Ethernet Connectors on Maintenance Panel on front
of chassis module
Management Methods
• Enterprise Fabric Suite 2007 Graphical User
Interface (GUI)
• QuickTools Web Applet
• Application Programming Interface (API)
• Command Line Interface (CLI)
• GS-4 Management Server (including FDMI)
• Simple Network Management Protocol
(SNMP)
• RADIUS
• File Transfer Protocol (FTP)
• Trivial File Transfer Protocol (TFTP)
• Storage Management Initiative (SMI-S)
Fabric Security
• Fabric binding via list of allowed Domain IDs
and Switch WWNs
• Inter-switch management communication data
path encryption
- Secure Shell (SSH) for CL
- Secure Socket Layer (SSL) for QuickTools,
EFS 2007, and SMI-S
• Device, Host, and Switch Authentication
- Local security database configuration, or
- Remote authentication via a RADIUS Server
- Additional MS request authentication via FCGS4 CT authentication
- Enable/Disable in-band management of
switch
Registered State Change Notification (RSCN)
• RSCNs are generated per standard (FC-GS, FCFS, FC-SW, etc.)
• Delayed to allow consolidation into single
RSCN
• QLogic IO StreamGuard™ suppresses RSCNs
between initiators
Maintenance Panel (MP)
• Dual redundant Maintenance Panel EPROMs
maintain chassis-specific information (such
as WWN, SNMP System Object ID, Serial
Number, Part Number, etc.), alternate Ethernet
management interface ports, and LED summary
status information for the switch
Fabric Diagnostics
• Optional SANdoctor software package
Global Services
• Standard 1 year hardware/firmware warranty
• SAN Pro Service and Support Programs
- SAN Pro Preferred standard on BASE Model
SB9200 & ENTRY Model SB9100: Next
Business Day (NBD) Advanced Delivery spares,
24x7 technical phone support
- Optional: upgrades to SAN Pro Choice (NBD
Onsite Replacement) and SAN Pro Prime
(4-hour Onsite Replacement) available for a
fee
MAINTAINABILITY
Maintenance Strategy
• Hot-pluggable Customer Replaceable Units
(CRUs) per chassis module
- SFP & X2 transceivers
- Storage Services Blades2 (8 maximum)
- I/O Blades (8 maximum, 4 types w/Intermix)
- CPU Blades (2 w/Model SB9200, 1 w/Model
SB9100)
- Power Supply Blades (2)
- Fan Blades (2)
• Enhanced data integrity on all data paths
• Fabric Shortest Path First (FSPF) rerouting
around failed links
• Integration with Simple Network Management
Protocol (SNMP) managers
• Non-disruptive “hot” firmware code load and
activation (NDCLA)
• Easy configuration, save, and restore
Maintenance Access Methods
• Single point in-band management with autodiscovery across multiple switches via software
GUI
• One out-of-band Ethernet 10/100Mb BaseT
RJ-45 management port per CPU Blade, each
replicated on Maintenance Panel
• One RJ-45 serial port per CPU Blade (RJ-45 to
DB-9 conversion dongle included)
• FC-GS4 Management Server
Diagnostics
• Power-On Self-Test (POST) tests all functional
components except SFP and X2 transceivers
• Optional SANdoctor fabric diagnostics software
- FC Ping: verifies functional path existence
between two ports
- FC Trace route: displays path information
between a source and destination
- Digital Diagnostics Monitoring: displays realtime SFP, X2, and XPAK transceiver data
Visual User Interface
• LED indicators on the Maintenance Panel, I/O
Blades, CPU Blade(s), SSP Blades, Power Supply
Blades, and Fan Blades
PHYSICAL CHARACTERISTICS
Enclosure Chassis Module/Blade Packaging
• Standard Rack Mountable Chassis Module
- Includes adjustable forward/reverse Mounting
Rail/Racking kit & dual power cords
• I/O Blades
- Standard and Optional I/O Blades Do NOT Include SFPs, X2 Transceivers, or Copper/Optical Cables (orderable separately)
• Hardware and Software License Field Upgradeability:
- SB9100 ENTRY Model to SB9200 BASE Model
- SB9200 Model to SB9200 Fault Tolerant Model
-O
ne SB9200 BASE Model to Dual HyperStack
Model
- Two SB9200 BASE Models to Dual HyperStack
Model
Dimensions (chassis module)
• Width: 431 mm (17.0”) 19” rack mountable
• Height: 179 mm (7.0”) (4U)
• Depth: 673 mm (26.5”)
Weight (SB9200 chassis module maximum)
• 40.82 kg (90 lbs)
Power Supply/Cooling (both SB9100 & SB9200)
• Hot-Pluggable/Dual-Redundant Power Supply
Blades with Integrated Cooling Fans
-D
ual 7’6” long 3-wire 16AWG power cables
with IEC320 input connector
• Hot-Pluggable/Dual-Redundant Fan Blades
• Back-to-Front and Front-to-Back Airflow Direction Models available
• 150-cfm airflow
• 1,000 watts or 3,414 BTU/hour rating per power supply
D ata s h e e t
SANbox 9000 Series
Heat Output (SB9200 full data traffic maximum)
• 2,046 BTU/hour at 128-ports 4-Gb Fibre Channel
(incl. SFPs and “local switching”)
• 4,228 BTU/hour at 256-ports 4-Gb Fibre Channel
HyperStack (incl. SFPs and “local switching”)
ELECTRICAL REQUIREMENTS
Operating Voltage/Frequency
• 100 to 240 VAC auto-sensing, single phase
• 47 to 63Hz
Power Source Loading (SB9200 chassis module
maximum power supply rating)
• 10 Amps at 100 VAC
• 4.2 Amps at 240 VAC
Operating Load (SB9200 with no data traffic)
• 550 Watts at 128-ports 4Gb Fibre Channel (including SFPs)
• 1,120 watts at 256-ports 4-Gb Fibre Channel HyperStack (including SFPs)
Operating Load (SB9200 with full data traffic)
• 600 Watts at 128-ports 4Gb Fibre Channel (includ­
ing SFPs and “local switching”)
• 1,240 watts at 256-ports 4-Gb Fibre Channel Hy­
perStack (including SFPs and “local switching”)
Circuit Protection
• Internally Fused
ENVIRONMENTAL FACTORS
Operating
• Temperature: 0°C to 40°C (32° to 104°F)
• Humidity: 15% to 80% non-condensing
• Altitude: 0 to 3048m (0 to 10,000 feet)
• Vibration: IEC 68-2, 5-500 Hz, random, 0.21g
RMS, 10 minutes
• Shock: IEC 68-2: 4g, 11ms, 20 repetitions
Non-Operating
• Temperature: -40°C to 70°C (-40° to 158 °F)
• Humidity: 5% to 90% non-condensing
• Altitude: 0 to 15,240m (0 to 50,000 feet)
• Vibration: IEC 68-2: 5-500 Hz, random, 2.1g
RMS,10 minutes
• Shock: IEC 68-2: 30g, 13 msec, trapezoidal pulse
REGULATORY CERTIFICATIONS
Safety Standards:
• UL 60950-1 – UL Listed (United States)
• CAN/CSA C22.2 No. 60950-1 – cUL Listed (Canada)
• EN60950-1 (EC)
• CB Scheme-IEC 60950-1 (International)
• GOST R (Russia)
Emissions Standards
• FCC Part 15B Class A (USA)
• VCCI Class A ITE (Japan)
• ICES-003 Class A ITE (Canada)
• EN 55022 Level A (EC)
• CISPR 22, Class A (International)
• AS/NZS CISPR 22:2002 Class A (AUS/NZ)
• GOST R (Russia)
• KN22 – Class A (Korea)
Environmental Standards
• RoHS-5/WEEE (EU & Japan)
Voltage Fluctuations
• EN 61000-3-3
Harmonics
• EN 61000-3-2
Immunity
• EN 55024
Marking
• FCC Part 15, UL (United States)
• cUL, CUE, TUV (Canada)
• TUV , CUE, CE (EC)
• VCCI-A (Japan)
• C-Tick (AUS/NZ)
• GOST R (Russia)
• MIC (Korea)
• Exempt (Taiwan)
• UL AR/S-Mark (Argentina)
• CCC – Field replaceable unit (FRU) power supply
modules (China)
Extended Distance Donor Buffer Credit Allocation
Donor Ports
Buffer Credit Allocation Per I/O
Blade
1/2/4 Gb/sec
10 Gb/sec
Distance @
1 Gbps
Distance @
2 Gbps
Distance @
4 Gbps
Distance @
10Gb
0
16
16
26km
13km
6km
2km
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
30
45
60
75
90
105
120
135
150
165
180
195
210
225
240
30
45
60
-
50km
75km
100km
125km
150km
175km
200km
225km
250km
275km
300km
325km
350km
375km
400km
25km
37.5km
50km
62.5km
75km
87.5
100km
112.5km
125km
137.5km
150km
162.5km
175km
187.5km
200km
12.5km
18.75km
25km
31.25km
37.5km
43.75km
50km
56.35km
62.5km
68.75km
75km
81.25km
87.5km
93.75km
100km
4.17km
6.25km
8.34km
-
• Each 1/2/4Gb and 10Gb port is supported by a data buffer with a 16 credit base capacity (that is, 16 maximum sized frames)
• Longer distances can be spanned at full bandwidth on 1/2/4Gb or 10Gb ports by extending buffer credits to G_Ports, F_Ports and E_Ports (per table
above).
• Each 1/2/4Gb or 10Gb port on an I/O blade can donate up to 15 of their 16 base buffer credits which a recipient port on the same I/O blade can borrow
• The recipient port also loses a single base buffer credit in the process.
• P rerequisite minimum cable lengths apply as well.
D ata s h e e t
Technical Specifications
SB9000 Series Minimum Configuration
SB9100 ENTRY Model
SB9200 BASE Model
Dual SB9200 HyperStack Model
CPU BLADES
16-port
4/2/1Gb FC
I/O BLADES
4-port
10Gb FC
I/O BLADES
FUTURE 2/8-PORT
ISCI/FCIP I/O
BLADE
Power
Supply
Blades
FAN
Blades
HyperStack
Cables
1
2
4
1
2
4
0
0
0
0
0
0
2
2
4
2
2
4
0
0
4
Footnotes:
1 – iSCSI/FCIP Intelligent Storage Router I/O Blade based upon the current SANbox 6000 Series products available at a future date
2 – Storage Services Platform (SSP) Blade available at a future date based upon the current SANbox 8000 Series products
For a list of authorized resellers, visit www.qlogic.com/buyqlogic/home_buy.asp
A
BETTER
4Gb
Corporate Headquarters
QLogic Corporation
Europe Headquarters QLogic (UK) LTD.
26650 Aliso Viejo Parkway
Surrey Technology Centre
Aliso Viejo, CA 92656
40 Occam Road Guildford
949.389.6000
Surrey GU2 7YG UK
+44 (0)1483 295825
© 2006–2007 QLogic Corporation. All rights reserved. QLogic, the QLogic Logo, the Powered by QLogic Logo, SANbox, SAN Pro, SANmark, SANdoctor, Enterprise Fabric Suite, QuickTools, Designed to the Core, and HyperStack are registered trademarks or trademarks
of QLogic Corporation.. Java is a registered trademarks of Sun Microsystems, Inc.. Windows is a registered trademark of Microsoft Corporation. Brocade is a registered trademark of Brocade Communications Systems Inc.. McDATA is a registered trademark of McDATA
Corporation. Cisco is a registered trademark of Cisco Systems, Inc.. All other brands and product names are trademarks or registered trademarks of their respective owners. Information supplied by QLogic is believed to be accurate and reliable. QLogic Corporation
assumes no responsibility for any errors in this brochure. QLogic Corporation reserves the right, without notice, to makes changes in product design or specifications.
SN0058047-00 C 07/07
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising