Specifications
Specifications
There is more than 1 version of this model.
Page down to identify the version you have.
DESCRIPTION
• Metal construction with a chrome plated, decorative
antique brass, LifeShine® polished brass, sand or
glacier finish
• Installed on 6" (152mm) to 16" (406mm) centers
• 1/2" IPS connections will accept standard ball nose
connection for 3/8" tubing
• Diverter valve includes an integral vacuum breaker
• Includes metal pop-up type waste assembly
OPERATION
• Knob style handles
• Operate by rotating either knob counterclockwise
to open and clockwise to close
• Water flow is diverted by turning the knob clockwise
for rim fill and counterclockwise for rosetta spray
CARTRIDGE
• 94831 diverter cartridge
• 1224 cartridge design for hot and cold valves
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified by CSA to meet CSA B-125,
ASME A112.18.1M and all requirements
referenced therein
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
CHATEAU®
Two Handle Bidet
Model: 5200
Discontinued Modesl: 5200S, 5200A,
5200P, 5200S, 5200W
NOTE: Can not be used with Non Rim Flush Bidet Fixtures
NOTE: Minimum Diameter Holes for Installation
Diverter Valve - 1” (25mm)
Handle Valves - 1-1/8” (29mm)
Spray Nozzle - 5/8” (16mm)
Lift Rod Escutcheon - 1/2” (13mm)
6" (152mm) MIN.
16" (406mm) MAX.
3" (76mm) MIN.
DIVERTING
MECHANISM
5-1/8"
(130mm)
ESCUTCHEON DIA.
2-1/8"
(54mm)
2-1/2"
(64mm)
CRITICAL
LEVEL
2-3/4"
(70mm)
1-1/4" (32mm) MAX.
DECK THICKNESS
HOT
INLET
COLD
FLEXIBLE INLET
CONNECTORS
LIFT ROD
7/8"
(22mm)
MAX.
SPRAY
NOZZLE
2-1/8"
(54mm)
3/8" DIA.
SUPPLY
TUBE
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 11/06
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Specifications
DESCRIPTION
• Metal construction with a chrome plated, decorative
antique brass, LifeShine® polished brass, sand or
glacier finish
• Installed on 6" (152mm) to 16" (406mm) centers
• 1/2" IPS connections will accept standard ball nose
connection for 3/8" tubing
• Diverter valve includes an integral vacuum breaker
• Includes metal pop-up type waste assembly
OPERATION
• Knob style handles
• Operate by rotating either knob counterclockwise
to open and clockwise to close
• Water flow is diverted by turning the knob clockwise
for rim fill and counterclockwise for rosetta spray
CARTRIDGE
• 94831 diverter cartridge
• 1224 cartridge design for hot and cold valves
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified by CSA to meet CSA B-125,
ASME A112.18.1M and all requirements
referenced therein
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
CHATEAU®
Two Handle Bidet
Model: 5200
Discontinued Modesl: 5200S, 5200A,
5200P, 5200S, 5200W
NOTE: Minimum Diameter Holes for Installation
Diverter Valve - 1” (25mm)
Handle Valves - 1-1/8” (29mm)
Spray Nozzle - 5/8” (16mm)
Lift Rod Escutcheon - 1/2” (13mm)
6" (152mm) MIN.
16" (406mm) MAX.
3" (76mm) MIN.
DIVERTING
MECHANISM
5-1/8"
(130mm)
ESC
2-1/2"
(64mm)
DIA.
2-1/2"
(64mm)
CRITICAL
LEVEL
2-7/8"
(73mm)
1-1/4" (32mm) MAX.
DECK THICKNESS
HOT
INLET
FLEXIBLE
CONNECTORS
COLD
INLET
LIFT ROD
7/8"
(22mm)
MAX.
SPRAY
NOZZLE
2-1/8"
(54mm)
3/8" DIA.
SUPPLY
TUBE
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 11/98
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising