PT-120
TWISTED-PAIR INTERFACES
PT-120
COMPUTER GRAPHICS VIDEO OVER TWISTED PAIR RECEIVER
SPECIFICATIONS
INPUTS:
1 RJ-45 LINE IN connector
OUTPUTS:
1 VGA / UXGA on an 15-Pin HD connector
MAX. OUTPUT LEVEL: 1.5Vpp
DESCRIPTION
The PT-120 is a twisted pair receiver for computer graphics video signals.
It will convert a twisted pair signal from a PT-110 transmitter (or other
compatible Kramer transmitter) to a computer graphics signal.
Bandwidth - 150MHz (-3dB).
Power Connect™ System
- Only one unit in a system, the transmitter
or the receiver needs to be connected to a power source.
HDTV Compatible.
Level (Gain) & EQ (Peaking) Controls.
Horizontal & Vertical Polarity Selection.
Twisted Pair Input Connector - RJ-45.
System Range - Up to 100 meters (320’). Greater distances possible
depending on signal resolution and cable.
Cable - Uses UTP (unshielded twisted pair) cable such as CAT 5.
Ultra Compact PicoTOOLS™
- 4 units can be rack mounted side-byside in a 1U rack space with the optional RK-4PT rack adapter.
Additional rack adapters with other configurations are also available.
BANDWIDTH (-3DB):
>150MHz, Fully Loaded.
DIFF. GAIN:
2.9% (worst case).
DIFF. PHASE:
0.3° (worst case).
K-FACTOR:
<0.05%.
S/N RATIO:
69dB (worst case).
CONTROLS:
–7.7dB to +3.1dB, 130m level, 0dB to +25dB, EQ. @
50MHz.
COUPLING:
DC
POWER SOURCE:
12VDC 175mA
DIMENSIONS:
6cm x 6.5cm x 2.5cm (2.36" x 2.56 x 1") W, D, H.
WEIGHT:
0.14kg (0.31lbs) approx.
ACCESSORIES:
Power supply
© www.kramerelectronics.com 2008
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising