La Spaziale S 1 Vivaldi II La Spaziale S 1 V ivaldi II La

La Spaziale S 1 Vivaldi II La Spaziale S 1 V ivaldi II La
La Spaziale S1 Vivaldi II
La Spaziale S1 Vivaldi II
For first three modes below: Start with VII On, hold On/Off button
down til On/Stby & current Temp lamps start flashing (~3sec). Once
instructions below completed, press On/Off button to save and exit
programming.
Programmable Pre-infusion - Hold Boiler button down for ~3sec.
#lamps lit = secs preinfusion (0-8s). Each Boiler press cycles selection.
Dose Setting (to program single or double cup button)
Fill PF with coffee. Press the Single Cup or Double Cup button.
Press the same button again when proper volume achieved.
Master Temp Setting
Current temp setting displayed. Press the Hot Water button to cycle to
the next Temp.
Extended Offset Temp Setting
Start in Stby mode. Press Boiler ~10s. On/Stby & Boiler lamps blinking.
Each 2 Cup press, -1C. Each 1 Cup press, +1C. Press On/Off to exit.
La Spaziale S1 Vivaldi II
La Spaziale S1 Vivaldi II
For first three modes below: Start with VII On, hold On/Off button
down til On/Stby & current Temp lamps start flashing (~3sec). Once
instructions below completed, press On/Off button to save and exit
programming.
Programmable Pre-infusion - Hold Boiler button down for ~3sec.
#lamps lit = secs preinfusion (0-8s). Each Boiler press cycles selection.
Dose Setting (to program single or double cup button)
Fill PF with coffee. Press the Single Cup or Double Cup button.
Press the same button again when proper volume achieved.
Master Temp Setting
Current temp setting displayed. Press the Hot Water button to cycle to
the next Temp.
Extended Offset Temp Setting
Start in Stby mode. Press Boiler ~10s. On/Stby & Boiler lamps blinking.
Each 2 Cup press, -1C. Each 1 Cup press, +1C. Press On/Off to exit.
La Spaziale S1 Vivaldi II
La Spaziale S1 Vivaldi II
For first three modes below: Start with VII On, hold On/Off button
down til On/Stby & current Temp lamps start flashing (~3sec). Once
instructions below completed, press On/Off button to save and exit
programming.
Programmable Pre-infusion - Hold Boiler button down for ~3sec.
#lamps lit = secs preinfusion (0-8s). Each Boiler press cycles selection.
Dose Setting (to program single or double cup button)
Fill PF with coffee. Press the Single Cup or Double Cup button.
Press the same button again when proper volume achieved.
Master Temp Setting
Current temp setting displayed. Press the Hot Water button to cycle to
the next Temp.
Extended Offset Temp Setting
Start in Stby mode. Press Boiler ~10s. On/Stby & Boiler lamps blinking.
Each 2 Cup press, -1C. Each 1 Cup press, +1C. Press On/Off to exit.
For first three modes below: Start with VII On, hold On/Off button
down til On/Stby & current Temp lamps start flashing (~3sec). Once
instructions below completed, press On/Off button to save and exit
programming.
Programmable Pre-infusion - Hold Boiler button down for ~3sec.
#lamps lit = secs preinfusion (0-8s). Each Boiler press cycles selection.
Dose Setting (to program single or double cup button)
Fill PF with coffee. Press the Single Cup or Double Cup button.
Press the same button again when proper volume achieved.
Master Temp Setting
Current temp setting displayed. Press the Hot Water button to cycle to
the next Temp.
Extended Offset Temp Setting
Start in Stby mode. Press Boiler ~10s. On/Stby & Boiler lamps blinking.
Each 2 Cup press, -1C. Each 1 Cup press, +1C. Press On/Off to exit.
For first three modes below: Start with VII On, hold On/Off button
down til On/Stby & current Temp lamps start flashing (~3sec). Once
instructions below completed, press On/Off button to save and exit
programming.
Programmable Pre-infusion - Hold Boiler button down for ~3sec.
#lamps lit = secs preinfusion (0-8s). Each Boiler press cycles selection.
Dose Setting (to program single or double cup button)
Fill PF with coffee. Press the Single Cup or Double Cup button.
Press the same button again when proper volume achieved.
Master Temp Setting
Current temp setting displayed. Press the Hot Water button to cycle to
the next Temp.
Extended Offset Temp Setting
Start in Stby mode. Press Boiler ~10s. On/Stby & Boiler lamps blinking.
Each 2 Cup press, -1C. Each 1 Cup press, +1C. Press On/Off to exit.
La Spaziale S1 Vivaldi II
La Spaziale S1 Vivaldi II
For first three modes below: Start with VII On, hold On/Off button
down til On/Stby & current Temp lamps start flashing (~3sec). Once
instructions below completed, press On/Off button to save and exit
programming.
Programmable Pre-infusion - Hold Boiler button down for ~3sec.
#lamps lit = secs preinfusion (0-8s). Each Boiler press cycles selection.
Dose Setting (to program single or double cup button)
Fill PF with coffee. Press the Single Cup or Double Cup button.
Press the same button again when proper volume achieved.
Master Temp Setting
Current temp setting displayed. Press the Hot Water button to cycle to
the next Temp.
Extended Offset Temp Setting
Start in Stby mode. Press Boiler ~10s. On/Stby & Boiler lamps blinking.
Each 2 Cup press, -1C. Each 1 Cup press, +1C. Press On/Off to exit.
For first three modes below: Start with VII On, hold On/Off button
down til On/Stby & current Temp lamps start flashing (~3sec). Once
instructions below completed, press On/Off button to save and exit
programming.
Programmable Pre-infusion - Hold Boiler button down for ~3sec.
#lamps lit = secs preinfusion (0-8s). Each Boiler press cycles selection.
Dose Setting (to program single or double cup button)
Fill PF with coffee. Press the Single Cup or Double Cup button.
Press the same button again when proper volume achieved.
Master Temp Setting
Current temp setting displayed. Press the Hot Water button to cycle to
the next Temp.
Extended Offset Temp Setting
Start in Stby mode. Press Boiler ~10s. On/Stby & Boiler lamps blinking.
Each 2 Cup press, -1C. Each 1 Cup press, +1C. Press On/Off to exit.
For first three modes below: Start with VII On, hold On/Off button
down til On/Stby & current Temp lamps start flashing (~3sec). Once
instructions below completed, press On/Off button to save and exit
programming.
Programmable Pre-infusion - Hold Boiler button down for ~3sec.
#lamps lit = secs preinfusion (0-8s). Each Boiler press cycles selection.
Dose Setting (to program single or double cup button)
Fill PF with coffee. Press the Single Cup or Double Cup button.
Press the same button again when proper volume achieved.
Master Temp Setting
Current temp setting displayed. Press the Hot Water button to cycle to
the next Temp.
Extended Offset Temp Setting
Start in Stby mode. Press Boiler ~10s. On/Stby & Boiler lamps blinking.
Each 2 Cup press, -1C. Each 1 Cup press, +1C. Press On/Off to exit.
La Spaziale S1 Vivaldi II
La Spaziale S1 Vivaldi II
For first three modes below: Start with VII On, hold On/Off button
down til On/Stby & current Temp lamps start flashing (~3sec). Once
instructions below completed, press On/Off button to save and exit
programming.
Programmable Pre-infusion - Hold Boiler button down for ~3sec.
#lamps lit = secs preinfusion (0-8s). Each Boiler press cycles selection.
Dose Setting (to program single or double cup button)
Fill PF with coffee. Press the Single Cup or Double Cup button.
Press the same button again when proper volume achieved.
Master Temp Setting
Current temp setting displayed. Press the Hot Water button to cycle to
the next Temp.
Extended Offset Temp Setting
Start in Stby mode. Press Boiler ~10s. On/Stby & Boiler lamps blinking.
Each 2 Cup press, -1C. Each 1 Cup press, +1C. Press On/Off to exit.
For first three modes below: Start with VII On, hold On/Off button
down til On/Stby & current Temp lamps start flashing (~3sec). Once
instructions below completed, press On/Off button to save and exit
programming.
Programmable Pre-infusion - Hold Boiler button down for ~3sec.
#lamps lit = secs preinfusion (0-8s). Each Boiler press cycles selection.
Dose Setting (to program single or double cup button)
Fill PF with coffee. Press the Single Cup or Double Cup button.
Press the same button again when proper volume achieved.
Master Temp Setting
Current temp setting displayed. Press the Hot Water button to cycle to
the next Temp.
Extended Offset Temp Setting
Start in Stby mode. Press Boiler ~10s. On/Stby & Boiler lamps blinking.
Each 2 Cup press, -1C. Each 1 Cup press, +1C. Press On/Off to exit.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising