ham catalog - Figure B

ham catalog - Figure B
• DIRECTIONALS • ROTATORS • VERTICALS • BEAMS • OSCAR LINK • DOUBLETS • ACCESSORIES • TOWERS
• LOG PERIODICS • DIRECTIONALS • ROTATORS • VERTICALS • BEAMS • OSCAR LINK • DOUBLETS • ACCESSORIES • TOWERS • BEAMS •
For Amateur Radio WORLDWIDE!
ham catalog
Antennas & Rotators
308 Industrial Park Road, Starkville, MS 39759 USA
Toll-Free Customer Sales Hotline: 800-973-6572 • FAX: 662-323-5803
E-Mail: hygain@hygain.com • Web: http://hy-gain.com
DIRECTIONALS • ROTATORS • VERTICALS • BEAMS • OSCAR LINK • DOUBLETS • ACCESSORIES • TOWERS
• LOG PERIODICS • DIRECTIONALS • ROTATORS • VERTICALS • BEAMS • OSCAR LINK • DOUBLETS • ACCESSORIES • TOWERS • BEAMS •
HY-GAIN ANTENNAS & ROTATORS
hygain Antenna Rotators
Hy-Gain Rotators set the standards that other rotators are measured against a long time ago. Hy-Gain’s time-tested,
mechanically and elctrically proven designs have graced ham radio towers over thirty years! Made in the USA! Unlike
some competing rotators, Hy-Gain uses American nuts and bolts. Reliable operation, long life, one year warranty.
T2X
TAILTWISTER SERIES II
. . . for large medium antenna arrays up to 20 square foot wind load
T-2X
The Tailtwister is one of the
popular rotators in the
79995 most
Hygain product line. It has been
$
T-2XD
Rotator has a triple bearing race with
95
138 ball bearings for large load bearing $
strength. Electric locking steel wedge
brake prevents wind induced antenna movement.
The control box features a North or South center
of rotation scale on meter and low voltage control for safe operation.
Clamp plate and stainless steel mounting
hardware is included. Use 21/16 inch maximum
mast. Use 110 VAC. Order T-2XX for 220
VAC. Optional lower mast, MSHD, $109.95.
T2XD, $1229.95 with the DCU-1 Pathfinder digital control is
available. The DCU-1 Pathfinder Controller features automatic
operation of brake and rotator, computer control with RS-232
passthrough and has a 1 degree heading accuracy. It is compatible
with many logging and contest programs and has six pre-sets for
your favorite beam headings. DCU-1 has an automatic 8-second
brake delay and a 360 degree choice for center of rotation.
Use 110 VAC. Order T-2XDX for 220 VAC operation.
1229
the standard to what competing rotators try to
match up to for well over years. Ask any ham
who owns one.
The T2X Tailtwister Series II Rotator is
for large medium antenna arrays up to
20 square foot wind load. Wind load
with mast adapter is 10 square feet.
It has 1000 inches - pounds in turning power and 9000 inches-pounds in brake
power. The effective movement in the tower
is 3400 feet - pounds. A new automatic 5-second brake delay insures
that the rotator is fully stopped before
the brake is engaged. No more accidentally engaging the brake while
the rotator is in movement.
T2X features a new low temperature grease which permits normal operation to -30O F. New alloy
ring gear has tensile strength of 100,000 psi for max reliability.
The indicator potentiometer has been improved for greater reliability. A silver-plated relay contact point makes for smooth traveling and more reliable contact between the pot strip and wiper arm - gives years longer life on these important, internal components.
New water-tight AMP detachable twist-and-lock connectors at
the rotator base and an 8-pin plug at the control box make it easy to
hook up.
TAILTWISTER Rotator Specifications
Mast Support
Wind load capacity (inside tower)
20 square feet
Wind Load (w/ mast adapter)
10 square feet
Turning Power
1000 in.-lbs.
Brake Power
9000 in.-lbs.
Brake Construction
Electric Wedge
Bearing Assembly
Triple race/138 ball brngs
Mounting Hardware
Clamp plate/steel U-bolts
Control Cable Conductors
8
Shipping Weight
31 lbs.
Effective Moment (in tower)
3400 ft.-lbs.
MSHD,
$109.95. Heavy
duty mast support for T2X,
HAM-IV and
HAM-V. Accepts 17/8 to
25/8 inch OD pipe.
Centers on 21/2 inches.
Hy-Gain Digital Automatic Controller for HAM-IV and Tailtwister
Hy-Gain DCU-1 Pathfinder is the new innovative digital control
unit that is compatible with T2X, HAMIV and HAM V rotators.
DCU-1 provides automatic operation of brake and rotor and calibration. It also has an automatic stop if no rotator movement is
detected in 8 seconds. A motor pulse slowdown (half-cycle) also
occurs on last 5-degrees before the complete stop. Also has
momentary reverse direction on start-up.
The front panel controls feature a 24-position digital encoder
knob that sets the target bearing, sets center of rotation in calibrate
mode. There are also six memory presets (push buttons), one start
rotation (push button -- also starts End Point Calibration <EPC>).
DCU-1 is computer controlled with RS232 pass-through, allows
programmable center of rotation and is compatible with many logging/contest software programs.
You get six presets (user programmable) for your favorite beam
headings and a one degree heading accuracy -- the DCU-1 is super
fast and easy to operate.
Display is a full gas plasma, red filter circle analog that can be
seen in the dark or in direct
sunlight. Analog scale is 5degree, Digital scale is 1degree with target bearing at
thirty seconds. Display life
is 30,000 to 40,000 hours.
DCU-1 features an automatic 8-second brake delay
which ensures that the rotator is fully stopped before the brake is engaged. With $ DCU-1 95
this feature, there is no more accidentally engaging
the brake while the rotator is in movement.
Provides a 360 degree choice for center of rotation (North,
South or any other heading). Use 110 VAC, 50/60 Hz.
Tough, durable cabinet measures 8.5Wx4.3Hx9D inches.
Ground terminal, fuse holder and 3-wire power cord included.
Order DCU-1X for 220 VAC operation.
749
HDR-300A
for King-sized antenna arrays up to 25 square feet wind load
The HDR-300A is for king-sized antenna arrays up to 25 sq.ft.
wind load area (inside tower). It has a 5000 inches - pounds turning power and a 7500 inches - pounds brake power. Brake construction is a solenoid operated locking brake and the bearing
assembly is bronze sleeve with rollers built to handle huge loads.
Control cable connector, new hardened stainless steel output shaft,
new North or South centered calibration, new ferrite beads on
potentiometer wires reduce RF susceptibility, new longer output
shaft keyway adds reliability. Self-centering steel clamp and hardware. Display accurate to 1o. Machined steel output. Mounting
hardware, stainless steel bolts included. Use 110 VAC. Weighs 61
lbs. UPS shippable. Order HDR300AX for 220 VAC operation.
2
HDR-300A
HDR-300A Rotator Specifications
Wind load capacity (inside tower)
25 square feet
Wind Load (w/ mast adapter)
not applicable
Turning Power
5000 in.-lbs.
Brake Power
7500 in.-lbs.
Brake Construction
solenoid operated locking
Bearing Assembly
bronze sleeve w/rollers
Mounting Hardware
stainless steel bolts
Control Cable Conductors
7
Shipping Weight
61 lbs.
5000 ft.-lbs.
Effective Moment (in tower)
www.hy-gain.com
149995
$
the first choice of hams worldwide!
HAM-IV . . . The most popular rotator in the world!
. . . for medium communication arrays up to 15 square feet wind load . . .
HAM-IV is the most popu- North or South center of rotation scale on meter, low voltage conlar rotator in the world for
trol, max mast size of 21/16 in.110 VAC.
$
95
obvious reasons. It’s solidly
Order HAMIVX for 220 VAC. Optional lower mast support,
constructed, has been time-test- MSHD, $109.95 available.
ed and proven for over twenty
years and is one heck of a buy HAM-V with DCU-1 Automatic Digital Controller
New r
. . . for medium antenna arrays up to 15 square feet
o
t
at just $649.95!!!
a
I n d i c meter
HAM
IV
is
for
medium
Similar to the HAM IV, but
HAM-V
ntio
Pote
communications arrays up to includes DCU-1 Pathfinder auto- $
95
15 square feet wind load area matic digital controller unit with
with DCU-1
(7.5 square feet with mast
gas plasma display. (see large
adapter). It has 800 inches- description page 2). The DCU-1 provides automatic
New n d
co
lbs. turning power and 5000 operation of brake and rotor and calibration, and is
5 - s e delay
inches-lbs. brake power.
computer-controlled with RS-232 pass-through and
e
k
bra
A new automatic 5- compatible with many logging and contest prosecond brake delay insures
grams. Features 6 presets for beam headings, 1
that the rotator is fully
degree accuracy, auto 8-secstopped before the brake is
ond brake delay, 360 degree
engaged. No more acciden- choice for center location,
tally engaging the brake
plus much more. See larger
while the rotator is in movedescription on page 2. Use
ment.
110 VAC. Order HAMVX
New Test/Calibrate function. New low temperature grease perfor 220 VAC operation.
mits normal operation down to -30o F. New alloy ring gear gives
HAM IV and HAM V Rotator Specifications Mast Support
extra strength to 100,000 PSI for maximum reliability.
Wind Load capacity (inside tower)
15 square feet
MSHD,
New indicator potentiometer has been improved for greater reli- Wind Load (w/mast adapter)
7.5 square feet
$109.95.
Heavy
ability. Silver-plated relay contact point makes for smooth traveling Turning Power
800 in.-lbs.
and more reliable contact between pot strip and wiper arm -- gives Brake Power
5000 in.-lbs. duty mast supBrake Construction
Electric Wedge port for T2X,
years longer life span on these important, internal components.
Bearing Assembly
dual race/98 ball bearings HAM-IV and
New detachable 8 pin latching Cinch connectors for easy
Mounting Hardware
Clamp plate/steel U-bolts HAM-V. Accepts 17/8 to
removal at the rotator and 8 pin plug at the controller. Dual 98
Control Cable Conductors
8 25/8 inch OD pipe.
ball bearing race for load bearing strength and electric locking
Shipping Weight
26 lbs.
Centers on 21/2 inches.
steel wedge brake prevents wind induced antenna movement.
Effective Moment (in tower)
2800 ft.-lbs.
HAM-IV
649
1099
CD-45II
. . . for arrays up to 8.5 square feet
For antenna arrays up to 8.5 sq. feet mounted
CD-45II
inside tower or 5 sq. ft. with mast adapter. Low $
95
O
temperature grease good to -30 F. New Test/ Calibrate function. Bell rotator design gives total weather protection,
dual 58 ball bearing race gives proven support. Die-cast ring
gear, stamped steel gear drive, trouble free gear train, North
center scale, lighted directional indicator, 8-pin plug/socket
on control unit, snap-action control switches, low voltage
control, safe operation, max mast size 21/16”. MSLD, light
CD-45II Rotator Specifications
duty lower
Wind load capacity (inside tower)
8.5 square feet mast support
5.0 square feet included. Use
Wind Load (w/ mast adapter)
600 in.-lbs. 110 VAC or
Turning Power
800 in.-lbs.
Brake Power
Disc Brake order CDBrake Construction
Bearing Assembly
Dual race/48 ball brings 45IIX for
Mounting Hardware
Clamp plate/steel U-bolts 220 VAC
Control Cable Conductors
8 operaShipping Weight
22 lbs. tion.
449
Effective Moment (in tower)
1200 ft.-lbs.
. . . for compact arrays up to 3.0 square feet
For compact antenna arrays and large
AR-40
FM/TV up to 3.0 square feet wind load
$
95
area. Dual 12 ball bearing race. Automatic
position sensor never needs resetting.
Fully automatic control -- just dial and touch for
any desired location. Solid state, low voltage control, safe and silent operation. 21/16 inches maximum
mast size. MSLD, light duty lower mast support
included. Use 110 VAC or order AR-40X for 220
VAC
AR-40 Rotator Specifications
operWind load capacity (inside tower)
3.0 square feet
1.5 square feet ation.
Wind Load (w/ mast adapter)
349
Turning Power
Brake Power
Brake Construction
Bearing Assembly
Mounting Hardware
Control Cable Conductors
Shipping Weight
Effective Moment (in tower)
350 in.-lbs.
450 in.-lbs.
Disc Brake
Dual race/12 ball bearings
Clamp plate/steel bolts
5
14 lbs.
300 ft.-lbs.
Remote Controlled Rotator/Controller
UHF/VHF/6M Rotator/Controller
Designed for the use of small UHF, VHF, 6-Meter, TV and FM
and other lightweight antennas.
Rugged heavy-duty rotator is built in a weather-proof one piece
cast aluminum housing. Has
AR-303/X
precision metal gears and
$
95
steel thrust bearings for durability. Includes rotator, controller, mount clamps and
hardware.
Use 110 VAC. Specify
“X” for 220V. Has HyGain’s superb one year limited warranty.
89
AR-40
Designed for the use of small UHF, VHF, 6-Meter, TV and FM
antennas. Has programmable antenna controller with remote-control.
AR-500 remembers up to 12 antenna directions
even after a power outage!
Control all functions with the remote control or
AR-500/X console. The control console displays loca$
95 tion chosen and relative position. Has same
rotator as AR-303 (see description left).
Includes rotator, controller,
3-device universal remote,
mount clamps and hardware.
Use 110 VAC.
Specify “X” for 220 Volts.
119
www.hy-gain.com
3
Genuine Hy-Gain Rotator Replacement Parts
Rotator Potentiometer
5-Second Brake Delay Kit
RPM-1
95
This potentiometer fits Hy-gain T2X, HAM-II, III, $
IV, V, and CD45II Hy-gain rotators. Has silver plated
contact point that makes for smooth traveling, longer
lasting and more reliable contact between pot strip and wiper
arm. RPM-1, $39.95 500 Ohms, for most Hy-gain rotators.
RPM-2, $39.95. Same as RPM-1, 1000 Ohms for AR-40.
RBD-5
95
Allows automatic 5-seconds brake delay for your $
Hy-Gain rotator. This delay insures that the rotator is fully stopped before the brake is engaged. Avoid accidentally engaging the brake while the rotator is in motion. For use with
HAM-II, HAM-III, HAM-IV, HAM-V, and T2X rotators. Easy to install inside the controller. Kit includes pre-assembled PCB & mounting hardware.
39
Motor Capacitors/Meters/Fuses
Silver plated
Contact Point
Rotator Connectors
A
A
B
Figure
A
B
C
C
D
E
F
F
C
D
E
F
Description
Part No. Price
5151501 $7.60 Motor start Capacitor for CD45, HAM-II, III, IV, V, T2X
5094300 $13.80 Motor start Capacitor for AR40 Rotator.
5147702 $56.70 Panel meter for CD45/HAM-IV, T2X with “North” scale.
Uses external meter lamp.
400-2678 $26.40 Meter with internal lamp for “Plus” series CD45, HAMIV, T2X, had “North” scale.
5089501 $1.43 Incandescent light bulbs, 28 V for controller with external
meter lamp. Bayonet base.
355-2678 $1.95 Incandescent light bulbs, 28 V, for “Plus” controller meter
with built-in lamp.
5056300 $1.44 1/8 Amp meter circuit fuse. For CD-45, HAMIV, T2X.
755-0103 $0.40 For HAM-III, HAM-IV, T2X, 3 Amp power fuse for
CD45, Ham-II, III, IV, V, T2X
(1034403)
Figure
A A
B
C
A
B
B
C
878715
870852
B
C
D
E
F
G
H
Part No.
640092
B
640091
870597
F
Description
Price
with latch
$13.00 8-Pin
C Jones in-line
D FemaleERotator
F Connector
G
H
$11.76 8-Pin Jones in-line Male Rotator Connector with latch
$19.95 8-Pin Amp Circular Female Connector Kit (connector
shell and 8 female pin) for T2X.
870596 $14.78 8-Pin Amp Circular Male Connector Kit (connector male
and 8 male pin) for T2X.
650082 $0.96 Amp Circular Connector Female Pin
650083 $0.78 Amp Circular Connector Male Pin
G
H
640076
640077
D
E
$6.36 Rotator Controller Chassis Mount Female 8-Pin Jones.
$6.72 Rotator Controller 8-Pin Male Jones Chassis Plug.
Rotator Cables & Pre-assembled Cables
Terminal board & Pigtail cable conversion kits
Figure Part No.
5146510
A
29
A
B
Price
$1.10 ft.
Figure
A
Part No.
878-1608
B
13-8075-H4
13-80100-H4
13-80125-H4
13-80150-H4
B
13-8006-H4 $36.25
C
13-8075-T2 $166.60 (75’)
13-8100-T2 $206.95 (100’)
13-8125-T2 $247.30 (125’)
13-8150-T2 $287.65 (150’)
C
13-8006-T2 $55.13
C
Price
Description
$9.64 8-screw terminal board. Fits CD-45II, HAM-II, HAM-III,
HAM-IV and T-2X. Also replaces 4 screws terminal
board for AR-40.
$29.95 8-Pin Jones Pigtail Cable Conversion Kit. Convert 8-pin
terminal board to a easy, detachable 8-pin Jones cable
assembly. Has male and female connectors securely
locked with latching clips. Fits CD-45II, HAM-II, HAMIII, HAM-IV and T-2X.
$39.95 8-Pin AMP circular connector cable conversion kit.
Convert 8-Pin terminal board to 8-Pin AMP water tight
circular connectors cable assembly. Easy, detachable,
Secured twist-and-lock. Fits CD-45II, HAM-II, HAM-III,
HAM-IV and T-2X.
Rotator Mast Plates and U-Bolts
$148.30 (75’)
$188.67 (100’)
$229.04 (125’)
$269.39 (150’)
C
Description
8 conductors PVC cable, 6 conductors 18
AWG plus 2 conductors 16 AWG. For Hy-gain
rotator with 8 wire connections.
Pre-Assembled cable for HAM-IV. Wired one
end with 8 pin Jones male and one end with
the 8-pin Jones female. Has latching clips for
secure connection. Other lengths not listed are
available.
Bench test cable for HAM-IV. 6’ pre-wired cable
assy. 8 pin Jones male to 8 pin Jones female.
Pre-assembled cable for T2X. Wired one end
with Jones male connector and one end with
AMP circular female. Water tight connectors
with Twist-and-lock for secure connection.
Other lengths not listed are available.
Bench Test Cable for T2X. 6 ft. pre-wired assembly. 8 pin Jones male to 8 pin AMP female.
Ball Bearings/Shim/Brake Wedges/Low Temp Grease
A
Figure
A
A
B
C
C
C
D
E
F
G
H
I
B
C
Part No.
5011500
5137000
5011800
5141610
5142310
5042610
D
E
F
G
H
I
Price
$11.66
$14.96
$8.78
$9.66
$11.04
$11.80
Description
Mast Mounting plate for HAM-IV, 3/16” Zinc plated steel.
Mast mounting plate for T2X, 3/16” Zinc plated steel.
Mast mounting plate for CD45II/AR40. 3/16” Aluminum.
HAM-IV (2 sets) U-bolt with nuts, lock wasters. Stainless.
T2X (2 sets) U-bolt with nuts, lock washers, Stainless.
CD45II & AR40 (4 sets) U-bolt with nuts, lock washers,
Zinc plated steel.
5141510 $26.20 HAM-IV Rotator mounting kit, complete with mast plate,
2 sets U-bolts, nuts & bolts, 4 each tower mounting bolts.
5142210 $39.10 T2X Rotator mounting kit: mast plate, 2 sets U-bolts, nuts
and bolts, 6 each tower mounting bolts.
5042510 $32.80 CD-45II, AR40 Rotator mounting kit: mast plate, 4 sets Ubolts, nuts and bolts, 4 each tower mounting bolts.
5142510 $1543/SET T2X rotator to tower stainless mounting bolts/washers (6).
$ 65 SET
5141810 7 / HAM/CD45/AR40 rotor to tower mounting bolts/washers (4).
5105700 $0.49/ EA Rotator bottom casting to top bell housing mounting bolts.
Motors/Ring Gears/Gears/Solenoid
A
B
Figure Part No.
A
5037406
A
5137600
B
5009900
C
5136101
C
5031310
D
5008410
E
5010700-1
F
G
4
C
Price
$59.95
$69.95
$47.68
$12.35
$8.40
$12.50
$16.40
D
E
A
F
G
B
Figure Part No.
A
5033502
5011300
B
A+B
C
D
D
E
5131000
C
D
E
Price
Description
$5.50 Ball Bearings (50 pack)
$5.14 Ball Bearing Retainer, 49 slots. Require 2 pieces for
HAM-IV, CD-45II and 3 pieces for T2X.
$9.95 Kit includes one bearing retainer and 50 ball bearings. Requires 2 kits for HAMs, CD45II & AR40 and 3 kits for T2X.
5039700 $4.87 Rotator Bottom Shim for HAMIV.
380828 $14.52 Brake Wedge for all HAM rotators. Stainless steel.
5151401 $15.60 Brake Wedge for T2X. Stainless steel.
5149710 $12.77 Low Temperature Rotator Lubricant, 1 ounce.
Replacement Rotators
and Controllers
A
Description
Rotator Motor CD-45II and AR-40.
Rotator Motor for HAM-IV and T2X.
Brake Solenoid for HAM-IV and T2X.
Ring Gear, Steel, for HAM-IV and T2X.
Ring Gear, Aluminum cast for CD-45II and AR-40.
Limit Switch Assembly for all Hy-Gain Rotators.
Spur Gear, Stainless Steel, HAM-IV, T2X, Require 2 per
rotator.
5011200-1 $33.40 Gear/Pinion Assembly, Stainless Steel, has short pinion,
HAM-IV, T2X, Require 3 per rotator.
5011100-1 $30.44 Gear/Pinion Assembly, Stainless steel, has long pinion,
HAM-IV, T2X. Require 1 per rotator.
A
+
B
B
C
D
E
F
Figure Part No. Price
Description
A
5140301 $329.95 HAM-II, III, IV & T2X Controller. Supplied with 8-pin
Jones male chassis mating connector. 110 VAC.
A
5156500 $259.95 CD-45II Controller. Supplied with 8-pin Jones male
chassis mating connector. 110 VAC.
B
5172600 $169.95 AR-40 Controller, 110 VAC.
C
878712 $499.95 HAM-II, III, IV Rotator with 8-pin Jones pigtail
male connector. Complete with mounting kits, (5141510).
D
5137701 $599.95 T2X Rotator with AMP circular male connector.
Complete with mounting kit (5142210).
E
5024102 $249.95 CD-45II Rotator with 8-pin terminal board. Complete with
mounting kit (5042510) Lower mast support not included.
F
5084800 $179.95 AR-40 Rotator. Complete with mounting kit (5042510).
Lower mast support not included.
Hy-Gain can repair or rebuild your rotator.
Call Hy-Gain for quote & other replacement parts not listed.
1-800-973-6572. email: hygain@mfjenterprises.com
Alfa RAK & Big RAK heavy-duty Azimuth Rotators
These new Hy-Gain Rotators feature . . . Super strong Double Worm Gear Drive, Self-Braking
design, Extremely Quiet Motors, One Degree Position Resolution, Automatic Digital Controller . . .
The RAK Rotators are designed
RAK-1 (RAK)
with a simple double worm gear
$
95
drive that results in a super-strong
with
controller
and yet simple and ultra-reliable
UPS Shippable
rotator system.
It can handle 550 pounds of vertical load. Turning is smooth, precise and extremely quiet. RAK
Rotators come complete with an
Plate adaptor
automatic digital controller.
The RAK-1C controller has one and mouse
degree resolution and a large easy- are not
to-read digital readout. A computer included.
serial RS-232 interface is available.
Works with many computer programs. See more information below.
RAK Rotators are designed for
simple mounting. Pipe mast mount
on both ends (which allows coax cable to pass through the center of
the rotator) prevents cable tangling and damage. An optional adaptor is available for plate mounting. See accessories section below.
999
Specs for RAK-1
Wind Load Area
Turning Torque,in-lbs
Brake Torque, in-lbs.
Brake Construction
Vertical Load
Rotation Speed
RAK Rotators operate from a RAK-2 (BIG RAK)
voltage range of 12 Volts to 24
$
95
Volts AC or DC. The higher the
with
controller
voltage the higher your torque
and the higher your turning speed UPS Shippable
will be -- a unique RAK feature.
Low-voltage, high torque DC
gear motor has a rotating speed of
60 seconds (360 degrees) with 24
Volts on the motor.
It’s quiet and powerful with selfbraking action and double worm
gear drive.
RAK and Big RAK heavy-duty
Azimuth Rotators are constructed
with 3/16 thick wall steel pipe and
real steel housing.
Plate adaptor and
RAK rotators use a sealed reed
mouse are not included
switch sensor technology for
reliable all-weather operation. Gives you super tight tolerances
with minimal play.
1499
RAK-1 @ 12 V
Approx. 30 sq. ft.
1400 in-lbs.
14,000 in-lbs.
Double Worm Gears
550 lbs.
120 seconds
RAK-1 @ 18 V
Approx. 30 sq. ft.
1800 in-lbs.
14,000 in-lbs.
Double Worm Gears
550 lbs.
90 seconds
RAK-1 @ 24 V
Approx. 30 sq. ft.
3240 in-lbs.
14,000 in-lbs.
Double Worm Gears
550 lbs.
60 seconds
Wind Load Area
Turning Torque,in-lbs
Brake Torque, in-lbs.
Brake Construction
Vertical Load
Rotation Speed
1 degree
720 degrees
16 lbs.
Reed Switch
2.0/2.6 in. Top/Bot.
1 degree
720 degrees
16 lbs.
Reed Switch
2.0/2.6 in. Top/Bot.
1 degree
720 degrees
16 lbs.
Reed Switch
2.0/2.6 in. Top/Bot.
Precision
Rotation Range
Rotator Weight
Position Sensor
Mast size
Specs for RAK-2
RAK-2 @ 12 V
Approx. 38 sq. ft.
>5000 in-lbs.
24,000 in-lbs.
Double Worm Gears
>700 lbs.
120 seconds
RAK-2 @ 18 V
Approx. 38 sq. ft.
>8000 in-lbs.
24,000 in-lbs.
Double Worm Gears
>700 lbs.
90 seconds
RAK-2 @ 24 V
Approx. 38 sq. ft.
Contact Hy-Gain(R)
24,000 in-lbs.
Double Worm Gears
>700 lbs.
60 seconds
1 / 0.5 degree
720 degrees
24 lbs.
Reed Switch
2.6/2.6 in. Top/Bot.
1 / 0.5 degree
720 degrees
24 lbs.
Reed Switch
2.6/2.6 in. Top/Bot.
1 / 0.5 degree
720 degrees
24 lbs.
Reed Switch
2.6/2.6 in. Top/Bot.
(360 degrees)
(360 degrees)
Precision
Rotation Range
Rotator Weight
Position Sensor
Mast size
Digital Automatic Rotator Controller & Controller Mouse
RAK-1C
RAK and Big RAK Rotator Systems are supplied with the
95
RAK-1C Automatic Controller. This multi-function controller has $
manual, semi-automatic and automatic modes. Left and Right
The reed switch position sensor
Arrow moves the rotator clockwise or counter-clockwise.
requires standard four conductor
Semi-automatic mode allows pre-set of desired beam locations.
cable. Has four LCD indicators.
Pre-set feature requires optional mouse to function. In automatic
Slim, compact size is just
mode the controller is controlled by an external computer attached
5Wx11/2Hx83/4D inches.
to the controller. Use optional AZ-1M, $39.95 control mouse.
Optional Mouse, AZ-1M, $39.95, allows six user programmaRAK-1C controller can be zeroed at any position to allow for
ble present buttons. Mouse rotates rotator left, right and stop.
installation inaccuracy or antenna mount slippage.
479
Ras Azimuth-Elevation Rotator
$
RAS-1 (RAS)
95
1599
RAS-2 (BIG RAS)
$
95
with controller
UPS Shippable
2299
with controller
UPS Shippable
Plate adaptor
not included
Plate adaptor
not included
RAS-2C Controller included
Hy-gain offers two models of the Azimuth-Elevation Rotators,
RAS-1 and RAS-2. Each is supplied with the RAS-2C Automatic
Digital Controller. These rotators employ the same design as the
RAK system above. See specifications for RAS-1 below.
Specs for RAS-1
Wind Load Area
Turning Torque in-lbs
Brake Torque, in-lbs.
Brake Construction
Vertical Load
Rotation Speed
RAS-1 @ 12 V
Approx. 30
1400 in-lbs.
14,000 in-lbs.
Double Worm Gears
550 lbs.
120 seconds
RAS-1 @ 18 V
Approx. 30
1800 in-lbs.
14,000 in-lbs.
Double Worm Gears
550 lbs.
90 seconds
RAS-1 @ 24 V
Approx. 30
3240 in-lbs.
14,000 in-lbs.
Double Worm Gears
550 lbs.
60 seconds
1 degree
360/180 degrees
29 lbs.
Reed Switch
2.6 inches Bottom
2.0 inches Elevation
1 degree
360/180 degrees
29 lbs.
Reed Switch
2.6 inches Bottom
2.0 inches Elevation
1 degree
360/180 degrees
29 lbs.
Reed Switch
2.6 inches Bottom
2.0 inches Elevation
(360 degrees)
Precision
Rotation Range
Rotator Weight
Position Sensor
Mast size Bottom
Mast Size Elevation
RAK & RAS Cntrlr Specs
Computer Interface
Pre-sets with Mouse
Emulation
Limit Settings
User-settable Calibration
Precision
Rotation Range
Weight
Connections to Rotator
RAK-1C
RS-232, 1200 Baud 8N 1
6 User settable
Spid, HY, OR, Yaesu
2-AZ-CW & CCW
N-S or any degree
1/0.5 degree
720 degrees
2.75 lbs.
4 wire (2 sens, 2 motor)
RAS-2C
RS-232, 600 Baud, 8N 1
N/A
Spid, Yaesu
4 (2 AZ - 2 EL)
AZ & EL, any degree
1, 0.5, 0.25 degree
360/180 degrees
4.75 lbs.
4 wire (2 sens, 2 motor) EL
4 wire (2 sens, 2 motor) AZ
Real Standard Elevation Rotator
The REAL Standard Elevation
REAL-1
Rotator has all of the mechanical fea- $
95
tures and specifications of the RAK
with
controller
rotator series, but is an elevation
UPS Shippable
rotator. It’s supplied with the RAKC1 digital rotator controller.
1069
RAK/RAS/REAL Rotator Accessories
PTP-18
$79.95
FPA-8
$49.95
FPA-4
$39.95
RAS-2 has 5,000 in-lbs. torque@12V; 8000 in-lbs. torque@18V
turning power and 24,000 in-lbs. of brake torque at all voltages.
Its vertical load is greater than 700 lbs. RAS-2 weighs 44 lbs.
Hy-Gain . . . Antennas, Towers and Rotators
Model#
AZ-1M
RAK-1R
RAK-2R
RAK-1C
RAS-1R
RAS-2R
RAS-2C
REAL-1R
FPA-4
FPA-8
PTP-18
Cost
$39.95
$599.95
$1199.95
$479.95
$1099.95
$1199.95
$599.95
$599.95
$39.95
$49.95
$79.95
Description
Rotator Controller Mouse
RAK Rotator Only
BIG RAK Rotator only
RAK Automatic Controller only
RAS Rotator only
BIG RAS Rotator only
RAS Automatic Controller only
REAL Rotator only
4” Pipe to Flat Plate Adaptor
8” Pipe to Flat Plate Adaptor
18” Pipe to Pipe Adaptor
5
HF BEAMS . . .
. . . are stronger, lighter, have less wind surface and last years longer
TH-11DX
$
TH-7DX, $869.95.
7-element, 1.5 kW PEP, 10,15,20 Meters
115995
7-Elements gives you the highest average gain of any
Hy-Gain tri-bander! Dual driven for broadband operation
without compromising gain. SWR less than 2:1 on all bands.
Combined monoband and trapped parasitic elements give
you an excellent F/B ratio. Hy-Gain’s diecast aluminum,
rugged boom-to-mast clamp, heavy gauge element-to-boom
brackets, BN-86 balun. For high power, use BN-4000.
11-Elements, 4.0 kW PEP,
10, 12, 15, 17, 20 Meters
TH-5MK2, $759.95.
5-element, 1.5 kW PEP, 10,15,20 Meters
The broadband five element TH5-MK2 gives you outstanding gain. Separate air dielectric Hy-Q traps let you
adjust for maximum F/B ratio on each band. Has HyGain’s exclusive BetaMATCHTM, stainless steel hardware
and compression clamps and BN-86 balun.
TH-3MK4, $469.95.
3-element, 1.5 kW PEP, 10,15,20 Meters
The super popular TH-3MK4 gives you the most gain
for your money in a full-power, full-size durable Hy-Gain
tri-bander! Impressive average gain and whopping average front-to-back ratio. Handles 1.5 kW PEP. 95 MPH
wind survival. Fits on average lot -- turning radius is just
15.3 feet. 4-piece boom is ideal for DXpeditions. Choose
CD-45II or HAM-IV rotator. Hy-Gain BetaMatchTM for
DC ground, full power Hy-QTM traps, rugged boom-tomast bracket and mounts on standard 2”O.D. mast.
Stainless steel hardware. BN-86 balun recommended.
TH-11DX, $1159.95. 11-element, 4.0 kW PEP, 10,12,15,17,20M
The choice of top DXers. With 11-elements, excellent gain and 5-bands,
the super rugged TH-11DX is the “Big Daddy”of all HF beams! Handles 2000
Watts continuous, 4000 Watts PEP.
Every part is selected for durability and ruggedness for years of troublefree service. Features a low loss log-periodic driven array on all bands with
monoband reflectors, BN-4000 high power balun, corrosion resistant wire
boom support, hot dipped gal-vanized and stainless steel parts.
Stainless steel hardware and clamps are used on all electrical connections.
TH-2MK3, $369.95.
2-element, 1.5 kW PEP, 10,15,20 Meters
The 2-element TH-2MK3 is Hy-Gain’s most economical
full power (1.5kW PEP) full size tri-bander. Increase your
effective radiated power and hear far better! Ruggedly
constructed, top-performing, compact 6 foot boom, tight
14.3 foot turning radius. Installs almost anywhere.
Rotate with CD-45II or HAM-IV. Use BN-86 balun.
EXP-14, $599.95.
4-element, 1.5 kW PEP, 10,15,20 Meters
Compact 3-element
10, 15, 20 Meter Tri-Bander
For limited space . . . Installs anywhere . . . 14.75 ft turning
radius . . . weighs 21 lbs . . . Rotate with CD-45II, HAM-IV
TH-3JRS, $359.95.
Hy-Gain’s most popular 3-element 10, 15, 20 Meter tri-bander
fits on most lots!
Same top performance as the
full power TH3MK4 in a compact
600 watt PEP design.
Excellent gain and F/B ratio let
you compete with the “big guns”.
Tooled manufacturing gives you
Hy-Gain durability with 80 MPH
wind survival.
Fits on light tower, suitable guyed
TV pole, or roof tri-pod.
Model
No. of avg gain avg F/B MaxPwr Bands
Wind Wind (mph)
No.
elements
dBi
gain watts PEP Covered sq.ft. area Survival
TH-11DX
TH-7DX
TH-5MK2
TH-3MK4
TH-3JRS
TH-2MK3
EXP-14
DB-1015
DB-1217
6
11
7
5
3
3
2
4
7
7
8.4
8.77
8.3
8.0
8.0
5.6
8.1
9.8
9.8
22
21
20
25
25
15-20
25
22
22
4000
1500
1500
1500
600
1500
1500
1500
1500
10,12,15,17,20
10, 15, 20
10, 15, 20
10, 15, 20
10, 15, 20
10, 15, 20
opt.
10,15,20 30/40
10, 15
12, 17
12.5
9.4
7.4
4.6
3.35
3.25
7.5
6.7
6.7
100
100
100
95
80
80
100
115
115
Revolutionary 4-element compact tri-bander can add
40 or 30 Meters! 14 foot boom and tight 17.25 feet turning
radius. Fits on roof tri-pod, mast or medium duty tower.
Hy-Gain’s patented broadbanding ParaSleeve gives you
less than 2:1 VSWR. 1.5kW PEP. BetaMATCHTM provides DC ground to eliminate static. Has BN-86 balun.
QK-710, $179.95. 30/40 Meter option kit for EXP-14.
DB-1015, $449.95.
7-element, 1.5 kW PEP, 10 & 15 Meters
This dual band beam for 10 and 15 Meters incorporates Hy-Gain’s superior mechanical design and has been
computer optimized and range-tested for max performance. DB-1015 features a 14 foot boom in 4 sections.
Handles full legal power and has Hy-Gain’s rugged
boom-to-mast clamp. DB-1217, $449.95. Similar to DB1015, but is dual band coverage for 12 and 17 Meters.
Boom
(feet)
24
24
19
14
12
6
14
14
14
Longest Turning Weight Mast dia Recom.
Elem. (ft) radius(ft) (lbs.) O.D.(in.) Rotator
37
31
31.5
27.42
27.25
27.3
31.5
29.5
29.5
22
20
18.42
15.33
14.75
14.25
17.25
16.3
16.3
www.hy-gain.com • Toll-free 1-800-973-6572
88
75
57
35
21
20
45
40
40
1.9-2.5
1.5-2.5
1.5-2.5
1.9-2.5
1.25-2.0
1.9-2.5
1.9-2.5
1.5-2.5
1.5-2.5
Retail
Price
T2X
$1159.95
HAM-IV $869.95
HAM-IV $759.95
CD-45II $469.95
CD-45II $359.95
CD-45II $359.95
HAM IV $599.95
HAM IV $449.95
HAM IV $449.95
Hy-Gain Long Johns HF Monobanders
LJ-105CA, $289.95.10 Meters, 5 elements,
Exclusive 50 Ohm BetaMatchTM. Excellent
DC Ground. Stainless steel hardware and
clamps. BN-4000 Balun recommended.
LJ-155CA, $429.95. 15/12 Meters, Five
Elements, Exclusive 50 Ohm BetaMatchTM.
Excellent DC Ground. Stainless steel hardware and clamps. Includes 12 Meter setting. BN-4000 Balun recommended.
LJ-205CA, $769.95. 20/17 Meters, Five
Elements. Exclusive 50 Ohm BetaMatchTM.
Excellent DC Ground. Stainless steel hardware and clamps. BN-4000 Balun recommended. Manual has setting for both bands.
LJ-204BA, $539.95. 20/17 Meters, Four
Elements. Exclusive 50 Ohm BetaMatchTM.
The LJ-204BA has a tiltable cast aluminum
boom-to-mast clamp, heavy gauge
Model #
LJ-105CA
LJ-155CA
LJ-205CA
LJ-204BA
LJ-103BA
LJ-153BA
LJ-203BA
Gain (dBi)
10.8 dBi
9.8 dBi
8.7 dBi
8.2 dBi
7.9 dBi
7.9 dBi
7.3 dBi
F/B Max
36 dB
25 dB
30 dB
28 dB
24 dB
25 dB
23 dB
machine-formed element-to-boom brackets
and stainless steel hardware and clamps.
BN-4000 Balun is recommended. Manual
has setting for both bands.
LJ-103BA, $159.95. 10 Meters, Three
Elements. Feeds with 50 Ohm coax,
comes factory pre-tuned with Hy-Gain’s
exclusive BetaMatchTM. BN-86 balun recommended. Includes stainless steel hardware and clamps.
LJ-153BA, $209.95. 15 Meters, 3 elements.
Feeds with 50 Ohm coax, BetaMatchTM, 5.7
dBd gain. BN-4000 Balun recommended.
Stainless steel hardware and clamps.
LJ-203BA, $329.95. 20 Meters, Three elements on a 16 foot boom. The LJ-203BA
feeds with 50 Ohm coax, factory pre-tuned
with Hy-Gain’s exclusive BetaMatchTM.
Max Power Boom Size
1500 W PEP
24 feet
1500 W PEP
26 feet
1500 W PEP
34 feet
1500 W PEP
26 feet
1500 W PEP
8 feet
1500 W PEP
12 feet
1500 W PEP 16 feet, 6 in.
element size
18 feet
25 feet
36 feet
36 feet, 6 in.
18 feet, 7 in.
24 feet, 11”
37 feet
BN-4000 Balun is recommended. Stainless
steel hardware and clamps. Tiltable, cast
aluminum boom-to-mast bracket.
turn Radius
15 feet
17 feet, 6 in.
25 feet
22 feet, 6 in.
10 feet, 2 in.
14 feet, 3 in.
20 feet
Mast diam.
1.9-2.5 in.
1.9-2.5 in.
1.9-2.5 in.
1.9-2.5 in.
1.625-2.0 in.
1.9-2.5 in.
1.9-2.5 in.
Surface
3.9 sq. feet
5.2 sq. feet
9.0 sq. feet
7.3 sq. feet
2 sq. feet
3 sq. feet
5.4 sq. feet
Wind
100 m.p.h.
88 m.p.h.
99 m.p.h.
100 m.p.h.
107 m.p.h.
80 m.p.h.
80 m.p.h.
Hy-Gain Discoverer Series Antennas
DISCOVERER 71, $289.95.
Covers 40/30 Meters.
This rotatable dipole of low weight and
wind surface area so easily fits most existing
beam installations. Tuned to 30 or 40 Meters
with a front-to-side ratio of 30 dB for a fast,
expansion of band capability. Feeds with 50
Ohm coax. Pre-formed mast clamp.
DISCOVERER 72, $649.95.
Covers 40 Meters.
This two-element 40 Meter beam has a
unique hairpin loading system. It delivers
superior performance. Feeds with 50 Ohm
coax and comes factory pre-tuned with HyModel #
DIS-71
DIS-72
DIR-73K
Gain (dBi)
6.5 dBi
6.5 dBi
7.5 dBi
F/B Max
35 dB
15 dB
26 dB
Max Power Boom size
1500 W PEP 2.7 feet
1500 W PEP 22.6 feet
1500 W PEP
35 feet
Gain’s exclusive BetaMatchTM. Tiltable
boom-to-mast bracket and stainless steel
hardware is included. Hy-Gain high power
BN-4000 balun is recommended.
DIR-73K, $409.95.
Add-On 30/40 Meter Director Kit
Converts the Discoverer 72 into a three-element beam. Amazingly, it’s all on a 35 foot
boom, outperforming the other brands that
are much larger. Discoverer 72 with director
Kit fits on medium duty towers such asHG52SS, saving both cost and space. HyGain
offers wide bandwidth and Hy-Q efficiency
without coils. Handle legal power limits.
elment size turn Radius
45 feet
22.5 feet
44.8 feet
25 feet
45.7 feet
28.9 feet
Mast diam. Surface
1.9-2.5 in. 2.7 sq. feet
1.9-2.5 in. 6.0 sq. feet
1.9-2.5 in. 9.0 sq. feet
Wind
100 m.p.h.
80 m.p.h.
80 m.p.h.
Hy-Gain HF Log Periodic Antennas
LP-1009A, $1429.95. LP-1009A for
balun included. Use T2X Tailtwister or
UHF connector. LP-1009AN for “N”
HDR-300A rotators.
connector. Covers 10/12/15/17/20 Meters
Covers the complete 13-30 MHz HF specLP-1010A, $1799.95. LP-1010A for
trum under a 2:1 VSWR. Built to comUHF connector. LP-1010AN for “N”
mercial specifications, it is used by
connector. Covers10-30 MHz
MARS, monitoring stations, marine and
(10, 12, 15, 17, 20, and 30 Meters)
government radio stations around the
There are only a few antennas that offer as
world and now it’s available to Hy-Gain
much HF frequency coverage as the LPamateur customers. The discerning ham
1010A. Like the LP-1009A, this antenna
operator will appreciate its performance
is built to commercial standards using
and ease of use. Just imagine all that spec- stainless steel hardware and having a wind
trum coverage and only one feedline.
survivability of 93 mph. Rotatable with
Exclusive 2KW BN-4000 current type
use of T2X or HDR-300A rotators.
Model #
Gain (dBi) F/B Max Max Power Boom size
element turn Radius Mast diam. Surface
Wind
LP-1009A/N
7.3 dBi
22 dB
1500 W PEP
27 feet
39 feet
22.5 feet
1.9-2.5 in. 12.5 sq. feet 103 m.p.h.
LP-1010A/N
7.0 dBi
22 dB
1500 W PEP
36 feet
48 feet
28.5
1.9-2.5 in. 16 sq. feet
93 m.p.h.
Hy-Gain . . . Antennas, Rotators and Towers
7
HY-GAIN
Hy-Gain VHF Vertical Antennas
V-4R
2 Meter
$
95 vertical
with 5.2
Covers
dBi gain
138-175 MHz derived
from the famous
extended double zepp
antenna design.
Radiating elements are
two collinear 5/8 waves
fed in phase. 2 sets of
1
/4 wave radials properly
decouple lower radiator
from the mast. SO-239,
handles 500 Watts. 9 ft.
UHF verti$
95 cal with 5.2
dBi gain
Covers
derived
400-475 MHz
from douV-3R
ble zepp
$
95 antenna
design.
Covers
216-225 MHz Type N,
handles 500
Watts, 4 foot.
11/4 Meter vertical w/5.2
dBi gain, double zepp
design. SO-239, handles
500 Watts. 6ft., 9 in.
V-2R
109
109
119
V-6R anten$
95 na is based
on 2 collCovers 51-54 inear 5/8
MHz
wave radiators. 500 Watt enclosed
coil and 2 sets of 1/4 wave
radials provide complete
mast decoupling and optimum pattern and gain.
Rugged design for severe
weather, also DC ground
lightning protector. 25 ft.,
3 in., UHF female connect, handles 500 Watts.
V-6R
V-42R is
$
95 independently tunCovers 143- able at
153, and 436- 144 and
455 MHz 440 MHz.
Fed through one coax
cable, it has sets of 1/4
wave radials which
properly decouple 5/8
wave radiators from the
mast. Gives 5 dBd gain
UHF and 3 dBd gain on
VHF. Type N, handles
200 Watts. 9 ft.
V-42R
204
169
Model#
Frequenc Gain dBi Pwr Input
Wind
Max Mast
Height
Weight
105 mph
2 in. OD
9 foot
6 pounds
200 Watts 100 mph
continuous
500 Watts 130 mph
2 in. OD
9 foot
6 pounds
2 in. OD
4 foot
4 pounds
5.2 dBi
500 Watts
100 mph
2 in. OD
6 ft. 9 in.
5 pounds
5.2 dBi
500 Watts
80 mph
1.5-2.25
25 ft. 3 in. 15 pounds
V-2R
138-175
5.2 dBi
V-42R
V-4R
143-153,
436-455
400-475
7.2 UHF
5.2 VHF
5,2 dBi
V-3R
216-225
V-6R
51-54
500 Watts
VHF-FM Beam Antennas
These 2 Meter FM beam antennas include Hy-Gain’s exclusive
Beta MatchTM to provide exceptional Front-to-Back ratio and maximum obtainable gains. The VB-23FM (8.3 dBi gain), VB-25FM
(11.2 dBi gain), VB-28FM (14 dBi gain), and the VB-214FM
(15.2 dBi gain) gives you a wide choice of 2 Meter Beam
performance from which to choose. Accepts up to 2 inch mast.
GPG-2B GPG-2B is a 5/8 Wavelength
$
95 Ground Plane for two meters is
49
omni-directional and tunable from
142-185 MHz. It delivers an omnidirectional gain of 3.2 dBi. Handles
100 Watts. Measures 4 feet, max
mast mount accepted is 1.625 in O.D. Wind
area is .30 sq. ft.
GPG-1B GPG-1B is a 1/4 Wavelength
$
95 ground plane similar to the GPGCovers 2B. It has unity gain, covers 144144-148 148 MHz.
GPG-1, $39.95, is similar to GPGMHz
1B, but covers162-174 MHz.
Boom
Wind
Weight
VB-216SAT
Model#
25 dB
13.7 dBi
200 W PEP
16
168.75 in.
1.1 sq. ft.
7 lbs.
UB-7030SAT
25 dB
16.2 dBi
200 W PEP
30
134 inches
.7 sq. ft.
4 lbs.
8
F/B ratio Gain dBi Pwr Input # Element
www.hy-gain.com
VB-214FM
$
95
2 Meter FM
Beam
89
DB-2345
$
95
2 Meter/440
Dual Band Yagi
DB-2345 gives a whopping 8 dBi
gain on 2-Meters and 6 dBi gain on
440 MHz. Has 3-elements on two
meters and 5-elements on 440 MHz.
Requires only one feedline for true dual band performance. Point in direction of your QSO for more
direction of output power. This redcuces interference and increases
signal strength.
89
TriBand 2M/440MHz/6M Yagi
VHB-246 Tri-beam has 3 ele-
VHB-246
25995 ments on 6M/2M and 5 elements
2 Meter/440/6M on 440 MHz. 144/440 MHz are
$
mounted at right angles to the 6M
beam -- lets antenna be oriented
for optimum 6M SSB/CW and 2M/440 MHz.
Coax feed points for 6M and 2M/440 MHz.
Tri-Band Yagi
Long el
Boom
Mast dia.
Weight
VB-23FM
20 dB
8.3 dBi
500 Watts
40.25 in.
43.5 in.
2.0 in.
2 pounds
VB-25FM
20 dB
11.2 dBi
500 Watts
39.625 in.
75 in.
2.0 in.
3 pounds
VB-28FM
20 dB
14 dBi
500 Watts
40.25 in.
148.75 in.
2.0 in.
4 pounds
VB-214FM
20 dB
15.2 dBi
500 Watts
39.5 in.
15 ft. 6 in.
2.0 in.
6 pounds
17 dB
8 dBi
500 Watts
40.5 in.
45 in.
1.5 in.
2 pounds
10 dB
6 dBi
500 Watts
40.5 in.
45 in.
1.5 in.
2 pounds
20 dB
8 dBi
500 Watts
119 in.
144 in.
2.0 in.
28 pounds
DB-2345 - 2M
VHB-246 - 2M
DB-2345 - 440
VHB-246 - 440
VHB-246-6M
F/B MAX Gain dBi Pwr Input
6-Meter DX Beam Antennas
The VB-64DX and
VB-66DX feature a
concept in beam
50-54 MHz construction that
provides actual
delivered performance equalling
maximum theoretical gain. The 4element VB-64DX generates an
impressive 10.4 dBi gain and the 6element VB-66DX increases the
gain to an unprecedented 12.5 dBi.
$
39
Hy-Gain’s Oscar Link antennas
are complete with the necessary
phasing lines, relays and hardware. Left and right circularity
switching reduces fading. True
RF switching elements are rated
at 200 Watts and improved VSWR
VB-216SAT
FB-217SAT
UB-7030SAT
higher efficiency. Feed points
$
22995 $22995 $11995 for
are encapsulated, weather proCrossboom
Covers
Covers
Assembly only
144-148 MHz
432-438 MHz
tected for long life. The fiberglass crossboom maintains the integrity of the circularity pattern.
DB-218SAT, $559.95. The complete 2 Meter/ 440 MHz Oscar
Link antenna system with crossboom assembly with necessary
phasing lines, relays and hardware.
79
Dual Band Yagi Antenna
Covers
142-185
MHz
Oscar Link 435 MHz • 145.9 MHz
VB-28FM
$
95
2 Meter FM
Beam
59
49
Model#
Hy-Gain VHF Ground Planes
VB-25FM
$
95
2 Meter FM
Beam
VB-23FM
$
95
2 Meter FM
Beam
VB-64DX
95
144
50-54 MHz
$
Model#
VB-66DX
95
264
Covers
Boom
Weight
UB-7031DX
Frequenc Gain dBi Pwr Input wind area #Element
420-438
19.8 dBi
2 kW PEP 1.9 sq. ft.
31
24.06 ft.
9.25 lbs.
VB-215DX
144-146
16.4 dBi
2 kW PEP 2.75 sq. ft.
15
27.88 ft.
13.56 lbs.
VB-64DX
50-54
10.4 dBi
500 Watts
1.1 sq. ft.
4
12 ft.
10 lbs.
VB-66DX
50-54
12.5 dBi
1.5kWPEP
1.8 sq. ft.
6
24.575 ft.
17 lbs.
VHF/UHF DX Beam Antennas
$
VB-215DX Hy-Gain’s DX-Series
95 VHF/UHF Beams are
229
based on the DL6WU
Covers
element length and spac144-146 MHz ing and were further
refined on Hy-Gain’s antenna test range
and by computer modeling. Both beams feature encapsulated
weatherproof feedpoints with type N connectors for excellent
VSWR and power handling. High quality mechanical construction
is assured by heavy wall booms and boom supports made of 6063T832 aluminum tubing, stainless steel hardware, UV stabilized
thick-shoulder element insulators and PTFE coaxial baluns.
HF VERTICALS
Self-supporting -- no guys required . . . remarkable DX performance -- low angle
radiation, omnidirectional . . . 1500 Watts . . . Low SWR . . . 2 year limited warranty
DX-77A, $44995
All hy-gain multi-band vertical antennas are entirely self supporting -- no guys
required. They offer remarkable DX performance with their extremely low angle of
radiation and omnidirectional pattern.
All hy-gain vertical antennas handle 1500 Watts PEP SSB, have low SWR, automatic band-switching (except AV-18VS) and include a 12-inch heavy duty mast support
bracket (except AV-18HT). Heavy duty, slotted, tapered swaged, aircraft quality aluminum tubing with full circumference compression clamps is used for radiators.
Includes all stainless steel hardware. Recessed SO-239 prevents moisture damage.
Hy-gain verticals go up easily with just hand tools and their cost is surprisingly
low. All hy-gain Verticals feature a two year limited warranty.
AV-18HT, $949.95.
AV-18AVQII, $239.95.
10/12/15/20/40/80 M
17 & 160 Meters optional
10/15/20/40/80 Meters
New! The classic is back with
three separate
Standing 53 feet tall, the famous Hy- improved design including
air dielectric Hy-QTM traps for 10 through
Gain HyTower is the world’s best performing vertical! The AV-18HT features 80 Meters --1.5 kW PEP. A loading coil
and an effective radiator is used for 80
automatic band selection achieved
through a unique stub-decoupling system Meters --1kW PEP.
which effectively isolates various sections
$
of the antenna so that an electrical 1/4
wavelength (or odd multiple of a 1/4
10/15/20/40 Meters
wavelength) exists on all bands.
The Hy-Gain AV-14AVQ uses the
Approximately 250 kHz bandwidth at 2:1 same trap design as the famous Hy-Gain
VSWR on 80 Meters. With the addition Thunderbird beams. Three separate air
of a base loading coil LC-160Q or MK- dielectric Hy-Q traps with oversize coils
160A, it also provides exceptional 160
give superb stability and 1/4 wave resoMeter performance. The 24 foot tower is nance on all bands. 18 feet, 9 pounds.
all rugged, hot-dip galvanized steel and
New!MK-80, $79.95. 80 Meter add-on
all hardware is iridited for corrosion
kit for AV-14AVQ. Easy to install. Inresistance. Special tilt-over hinged base cludes pre-wound loading coil, hardware.
for easy raising and lowering. 53 feet,
$
114 lbs. MK-17, $89.95. 17M add-on Kit.
LC-160Q, $109.95. 160 M loading coil.
10/12/15/17/20/30/40/80 M
MK-160A, $119.95. 160M 1500W kit.
High quality construction and low cost
make the AV-18VS an exceptional value.
$
Easily tuned to any band by adjusting
10/12/15/17/20/30/40/80M feed point at the base loading coil. Roof
mount with Hy-Gain AV-14RMQ kit,
160 Meters optional.
$89.95. 18 feet, 4 pounds.
All bands are easily tuned with the
$
DX-88’s exclusive adjustable capacitors.
80 and 40 Meters can even be tuned from
10, 15, 20 Meters
the ground without having to lower the
The AV-12AVQ also uses Thunderbird
antenna. Super heavy-duty construction.
25 feet, 18 pounds. DX-88 OPTIONS: beam design air dielectric traps for
KIT-160-88, $199.95. 160 M add-on kit. extremely Hy-Q performance. This is the
GRK-88, $99.95. Ground Radial System. way to go for inexpensive tri-band performance in limited space. 13 ft., 9 lbs.
RRK-88, $99.95. Roof Radial System.
Roof mount with AV-14RMQ kit, $89.95.
AV-18VS $11995
DX-88, $36995
AV-12AVQ $13995
AV-14AVQ 17995
AV-18AVQII $23995
AV-18HT $94995
Freueals!
Man
AV-14AVQ, 179.95.
AV-18VS, 119.95.
DX-88, 369.95.
AV-12AVQ, 139.95.
DX-77A, $449.95.
AV-14RMQ, $89.95
Roof Mounting Kit
10/12/15/17/20/30/40 M
No ground radials required! Off-center-fed Windom has 55% greater bandwidth than competitive verticals. Heavyduty tiltable base. Each band independently tunable. 29 feet, 25 pounds.
Hy-Gain(R) Guy-Wire Gripper
Hy-gain’s Guy-Wire Gripper
turns the horrendous job of tightening guy wires into a easy one
man operation. This wonder tool
GWH-1
works together with a “come-a-long” $
95
cable puller to hold/stretch guy wire or
cable. Spring loaded for easy operation. Use for guy wire or cable up to 1/4” diameter.
24
Model #
AV-18HT
AV-14AVQ
AV-12AVQ
AV-18VS
DX-88
DX-77A
AV-18AVQII
Price
$949.95
$179.95
$139.95
$119.95
$369.95
$449.95
$239.95
Bands
10,15,20,40,80
10,15,20,40
10/15/20 M
10 - 80 M
10 - 80 M
10 - 40 M
10,15,20,40,80
The AV-14RMQ roof mounting kit
provides rugged support for Hy-gain
models AV-18VS, AV-14AVQ and AV12AVQ. Kit includes base plate, mast,
radial/guy wires and mounting hardware.
Max Power
1500 W PEP
1500 W PEP
1500 W PEP
1500 W PEP
1500 W PEP
1500 W PEP
1500WPEP
Height
53 feet
18 feet
13 feet
18 feet
25 feet
29 feet
18 feet
Weight
114 pounds
9 pounds
9 pounds
4 pounds
18 pounds
25 pounds
12 pounds
Wind Surv.
75 MPH
80 MPH
80 MPH
80 MPH
75 mph no guy
60 mph no guy
70 mph guy
Hy-Gain . . . Antennas, Rotators and Towers!
Rec. Mast
-----1.5-1.625”
1.5-1.625”
1.5-1.625”
1.5-1.625”
1.5-1.625”
1.5-1.625”
9
Hy-Gain(R) Multi-Band PATRIOT Vertical Antennas
8-band vertical covers 40/30/20/17/15/12/10/6 Meters
• No radials • No traps • No ground • No tuning • Handles 1500 Watts
hy-gain’s new PATRIOT HF verticals are the best
hy-gainR AV-640
built, best performing and best priced multiband ver- 8 Bands: 40, 30, 20, 17, 15, 12, 10, 6 M
ticals available today.
Make full use of your sunspot cycle with the
PATRIOT’s low angle signal.
Suggested Retail
AV-640, $399.95, uses quarter wave stubs on 6, 10,
Call your dealer for
12 and 17 meters and efficient end loading coil and
your best price!
capacity hats on 15, 20, 30 and 40 meters.
Instead of typical traps, the AV-640 resonators are
placed in parallel not in series.
End loading of the lower HF bands allows efficient operation with a manageable
antenna height.
No ground or radials needed -- Effective counterpoise replaces radials, end fed
with broadband matching unit.
Automatic bandswitching -- Single coax cable feed, each band is individually
tunable, wide VSWR bandwidth.
Sleek and low-profile -- Low wind surface area, small area required for mounting,
mounts easily on decks, roofs and patios.
Built-to-last -- Hy-gain’s Patriot series antennas boast a high wind survival due to
its sleek, but sturdy frame. The matching unit is made from all TeflonR insulated wire.
Hy-gainR warranty -- Two year limited warranty, all replacement parts in stock.
AV-620, $299.95. Covers all bands 6 through 20 Meters with no traps, no coils, no
radials yielding an uncompromised signal across all bands.
$
Model #
AV-620
AV-640
Bands
6B, 6-20
8B, 6-40
Max Pwr
1500W
1500W
Height
22.5 feet
25.5 feet
39995
Weight
10.5 lbs.
17.5 lbs.
wind surv
80 MPH
80 MPH
FAMOUS Heavy Duty HY-GAIN BALUNS
BN-86, $79.95.
BN-4000B, $109.95.
Broadband 50 Ohm
Ohm ferrite
Beam current balun is
balun. Useable
potted to seal out
from 3-30 MHz.
moisture. Rated at
Rated at 1500 W.
4000 Watts for
Rec-ommended
increased power hanW
for all HF Yagi 4000
dling capabilities.
antennas. It pro- Range is 1 MHz to 54 MHz. SO-239
vides improved
connector. BN-4000D, $109.95.
front-to-back ratio. Comes w/clamp to dipoles. BN-4000N, $119.95. “N”
bolt to boom, SO-239 connector.
connector.
1500W Broadband 50
Hy-gain Antenna Feedpoint Pig Tail Cable
APT-2, $12.95.
Hy-gain’s Antenna Feedpoint Pig Tail cable has 2-foot length
for connecting between antenna and your coaxial feedline.
Has SO-239 connector on one end and 2 (#10) ring terminals
on the other end. Provides an easy and reliable connection for
your feedline with PL-259 connector to your antenna feed point.
Use this for Hy-gain VB series beams and other antennas
without an SO-239 connector feed point.
HF Multiband Hy-Q trap DOUBLETS
DP-2BDQ, $139.95. 40/80 Meters, 101 feet maximum
length of dipole.
DP-5BDQ, $259.95. 10-80 Meters, 94 ft. max length.
DP-2BDQ and DP-5BDQ are designed for horizontal or
inverted “V” rated at legal power. Each individually pretuned
matched traps for each band. 50-Ohm feed, cable not incl.
ADJUSTABLE HF DIPOLE ANTENNA
DP-19PD, $279.95. 1.8-30 MHz, 160-10 Meters. Great for field day, camping or anytime. Braided nylon wire rope with conductors woven in. Pre-marked frequencies
for easy installation. Includes 100 foot support rope on each end and SO-239 (UHF)
connector is on center insulator.
10
www.hy-gain.com • Toll-free 1-800-973-6572
hy-gainR AV-620
AV-620/640
Matching
Network
6 bands: 20, 17, 15, 12, 10, 6 M
29995
$
Suggested Retail
HY-GAIN INSULATORS FOR
MULTIBAND DIPOLE ANTENNA
C-1, $29.95.
Center Insulator
for multiband
dipole antenna.
C-1C, $29.95.
E-1, $6.95.
Similar to C-1, but has
7-inch End
SO-239
Insulator for
antenna
connector.
Multiband doublet antenna. Set of 2.
4 Foot
Ground Rod
Durable
four foot copper bonded
Code B steel earth
ground rod is a tough
3/8 in. diameter.
Sharp point makes it
easy to insert ground.
Helps bleed off static,
RFI and prevent RF
hot spots. Use several
to form a good RF
ground for long wires.
GR-1
895
Ship
$
Hy-Gain Glazed
Ceramic Insulator
E-2
79c
each
Ship Code A
E-26
$
456
6-Pack
Ship Code A
Extra-strong -will not break, arc
over or melt even
under full legal
power. Molded
ridges give extra-long
path to prevent highvoltage breakdown.
Hy-Gain(R) 160-6 Meters Self-Supporting Vertical Antenna
Full 1500 Watts, 43 feet, includes base mount, great for stealth
AV-6160
• Includes
legal limit
balun and
Base
Mount
Assembly
Operate all
39995 bands 160-6
Ship Code E
$
New
!
Meters at full
1500 Watt with
this self-supporting, 43 feet
high performance vertical! It
assembles in
less than an
hour and its low
profile blends in
with the sky and
trees -- you can
barely see it . . .
Exceptional
Performance
The entire length
radiates to
AV-6160 includes provide
this base mount exceptional
low angle
radiation
and legal limit
160-20
balun!!!
Meters and
very good
performance
on 17-6
Meters.
You can
shorten it by
telescoping it
down for
more effective low
angle radiation on higher bands.
Just talk with automatic tuner!
A wide-range automatic or manual antenna tuner at your rig
easily matches this antenna for all bands 160-6 Meters.
There’s no physical tuning adjustments on the antenna -- you
simply put it up!
An optimized balun design allows direct coax feed with negligible coax loss (typically less than 1/2 dB 60-6 Meters and less than 1
dB 160-80 Meters with good quality, low-loss coax).
Extremely low wind loading
With just 2 square feet wind load, the AV-6160 has the lowest
wind-loading and lowest visibility of any vertical antenna!
The key is a six foot section of tapering diameter stainless
steel whip that flexes in strong wind instead of stressing the
bottom sections.
Its 2-inch O.D.and .120 inch thick walled tubing bottom
section makes it incredibly strong.
Just 20 lbs., uses super-strong 6063 aircraft aluminum tubing. Stainless steel hardware.
Assembles in an hour
Ground mounting lets you hide antenna base in shrubbery.
Requires ground system -- at least one radial. More extensive
ground work better.
Stealth Operation
Low profile. Hide behind trees, fences, buildings, bushes.
Use it as a flagpole. It easily telescopes down during the day.
64’, 11-Sect. Telescopic Aluminum Mast
ATM-65
Includes one size of each slitted tube list95
ed above and ten hose clamps. ATM-65 is 64 $
feet fully extended and 6 feet collapsed with- Ship Code D
out clamps. Guying is required if mast is
extended beyond 30 feet. Top section is .625” OD.
Bottom section is 2 inches OD x .120 wall.
199
Base Mount for Fiberglas
and Aluminum Masts
ATB-65, $69.95. Complete base assembly kit
with mounting plate, insulators, hardware,
SO-239, etc. for fiberglass and aluminum masts.
Fits up to 2.0” OD masts. This is a super-strong
heavy duty telescoping MAST, not a flimsy pole!
These super-strong masts are made of .125 inch
thick wall fiberglass tubing.
80/160 Meter high-efficiency Matching Network
Hygain’s AV-6110 can improve efficiency on
!
160 and 80 Meters for the popular new 43-foot
New
all band vertical antennas by eliminating SWRrelated coax and unun mismatch losses. When fed with $AV-611095
249
a 1:4 unun, the 43’ antenna has a reasonable compro- Ship
Code B
mise SWR on 60-10 Meters. However, at 160/80M it is
virtually impossible to match this antenna from your shack because
of the low radiation resistance. If you are using low loss coax, you
will lose much power in the coax and unun due to bad antenna mismatches. Installed at the base of the 43’ vertical, AV-6110 will significantly eliminate these losses and put 160 and 80 Meter bands
back within the tuning range of the tuner inside the shack.
Includes remote power injector. Switch for 160, 80 Meters and
off positions. Handles 1500 Watts. Measures 3Wx11Hx3D inches.
MFJ All-band Ground Radials
GRK-6160
This all-band
3495 ground radial
UPS Shippable
$
AV-6110
80/160 Meter rk
Matching Netwo
system is
designed for the AV-6160
and other vertical antennas
when a radial system is required. It is a convenient
and effective radial system that provides the necessary return path for ground currents to reduce
ground losses. It consists of 2 sets of 4 radial wire
assemblies giving a total of eight 14’ radial wires.
Each set has a 1/4” ring lug for attaching to the
antenna ground point. Each end of the radial wire
has a solder lug for staking the wire end.
Hy-Gain 20/15/10/6 Meter Rotatable Dipole
Hy-gain 6M Add-On Dipole Kit
TH-1 is a full-size high-effiency 26’,
20-15-10-6 Meter full legal limit rotatTH-1
able dipole that is super low-profile -$
29995
almost invisible from across the street!
UPS Shippable
With a 13-foot turning radius and tiny 9
lb. weight, it fits on small roofs, apartments and condos -- easily turned by a lightweight TV rotator like Hy-Gain(R) AR35. Mount in the attic for antenna restricted neighborhoods. But it is no wimp! Its
bidirectional pattern can help reduce QRM and/or noise while maximizing your signal in the directions that you want -- so you can work some real DX. Handles up to
a full 1500 Watts SSB/CW on all HF bands and Six Meters.
Adds 6-Meter capability
to most HF yagis or rotatable dipoles. Mounted to $MK-695
driven element of most HF 39
rotatable dipoles or HF single-band/multi-band beams
without affecting antenna’s performance. Handles
1.5 kW. Adds less than 1 lb. weight and essentially
no increase in wind-loading to the existing antenna.
HF beam must be direct-fed with coax, or a 1:1 balun
that handles 1.5 kW. Power may be limited by the
power handling of the installed balun on HF beam.
www.hy-gain.com • Toll-free 1-800-973-6572
11
Hy-gain Aluminum Tubing
Hy-Gain HyTower-Jr TM
6063 T832 round, drawn aluminum tubing sold in 2 styles:
standard or slitted one end, (.083” gaps, 1-2” slit lengths).
Available in 3 foot or 6 foot lenghts. Tubings are sized to allow
telescoping into one another from .625 OD to 2” OD. Select
slitted for telescoping. Use Hy-gain hose clamps to secure.
Stands 39 feet tall . . . Full 1/4 Wave on 40, 20,
15, 10 Meters . . . Cage loading on 80 Meters . . .
World’s Second Best Vertical Antenna . . .
Standing a tall 39 feet with full-size elements and rated at 5 KW, the AV-18JR Hygain HyTower-Jr.TM is the world’s second
best* performing vertical!
AV-18HTJr.
Stub-decoupling is used
$
95 to give full-size quarter
UPS Shippable wave radiators on 40, 20,
15, 10 Meters with super
efficient cage loading on
80 Meters.
The HyTower-JrTM has almost no losses -your ground system determines your efficiency.
It is automatic bandswitching, fed with
50 Ohm coax and has low SWR over an
exceptionally wide bandwidth with SWR
less than 1.2 at resonance.
The main radiator is aircraft highstrength, heavy walled, 2-inch aluminum
tubing swedged at the top. Self-supporting
in winds up to 40 MPH.
Mounts on 11/4 inch plumber’s pipe.
Heavy duty components will give you years
of trouble-free operating pleasure.
Requires good ground system for optimum performance. UPS Shippable.
*The famous 53 foot Hy-gain HyTowerTM
is legendary. It’s the premier, best performing vertical in the world -- bar none!
At less than half the price with nearly the
same performance and based on the same
principles, the HyTowerJrTM is the poor
man’s version of its father HyTower.
Of course, JuniorTM doesn’t have its
father’s rugged hot-dipped galvanized steel
tower and construction!
6’ Lg OD x Wall x ID
.625”x.058”x.555”
.750”x.058”x.634”
.875”x.058”x.759”
1.000”x.058”x.884”
1.125”x.058”x1.009”
1.250”x.058”x1.134”
1.375”x.058”x1.259”
1.500”x.058”x1.384”
1.625”x.058”x1.509”
1.750”x.058”x1.634”
2.000’x.120”x1.760”
3’Lg OD x Wall x ID
.625”x.058”x.555”
.750”x.058”x.624”
.875”x.058”x.759”
1.000”x.058”x.884”
1.125”x.058”x1.009”
1.250”x.058”x1.134”
1.375”x.058”x1.259”
1.500”x.058”x1.384”
1.625”x.058”x1.509”
1.750”x.058”x1.634”
2.000’x.120”x1.760”
349
P/N No slit, Price/ea
810-0625E-6U, $5.79
810-0750E-6U, $6.99
810-0875E-6U, $7.49
810-1000E-6U, $8.09
810-1125E-6U, $8.99
810-1250E-6U, $10.09
810-1375E-6U, $11.19
810-1500E-6U, $12.49
810-1625E-6U, $13.99
810-1750E-6U, $14.89
810-2000E-6U, $27.49
P/N No Slit, Price/ea
810-0625E-3U, $2.89
810-0750E-3U, $3.49
810-0875E-3U, $3.75
810-1000E-3U, $4.05
810-1125E-3U, $4.50
810-1250E-3U, $5.05
810-1375E-3U, $5.60
810-1500E-3U, $6.00
810-1625E-3U, $7.00
810-1750E-3U, $7.45
810-2000E-3U, $13.75
P/N Slitted Price/ea. $/Ad ft.
810-0625E-6S, $6.29 $1.04
810-0750E-6S, $7.49 $1.25
810-0875E-6S, $7.99 $1.33
810-1000E-6S, $8.59 $1.43
810-1125E-6S, $9.49 $1.58
810-1250E-6S, $10.59 $1.77
810-1375E-6S, $11.69 $1.95
810-1500E-6S, $12.99 $2.17
810-1625E-6S, $14.99 $2.50
810-1750E-6S, $15.89 $2.65
810-2000E-6S, $28.60 $4.78
P/N Slitted Price/ea. $/Ad ft.
810-0625E-3S, $3.14 $1.04
810-0750E-3S, $3.74 $1.25
810-0875E-3S, $3.99 $1.33
810-1000E-3S, $4.29 $1.43
810-1125E-3S, $4.75 $1.58
810-1250E-3S, $5.29 $1.77
810-1375E-3S, $5.85 $1.95
810-1500E-3S, $6.50 $2.17
810-1625E-3S, $7.50 $2.50
810-1750E-3S, $7.95 $2.65
810-2000E-3S, $14.35 $4.78
810-2000I-6W, $33.60 each. Unique tubing has one end slitted and
one end swaged to make it stackable. Join one end to other to make
a longer pole. Secure with standard host clamp. Strong, 2”OD x .120”
wall. Good for base sections of vertical antennas. Standard 6-ft. length,
longer sections, to 20 ft. available. Add $4.78 each add’l foot. 6 ft.
lengths ship by UPS, longer units must ship UPS oversize/truck.
Hy-gain Stainless Steel Hose Clamps
Part No.
745-3106S
745-3110S
745-3116S
745-3128S
Price
$1.00
$1.00
$1.25
$2.84
Description
#6 Clamp for .75” OD to .875” OD tubing
#10 Clamp for 1” OD to 1.125” OD tubing
#16 Clamp for 1.25”OD to 1.625” OD tubing
#28 Clamp for 1.625” OD to 2” OD tubing
Hy-gain Custom Made Precision Antenna Hardware
BMC-249, $79.95. Boom to Mast Clamp
Heavy duty 11/4” OD thick aluminum die casted boom to
mast clamp designed specifically for securing heavy
antennas. It is capable of supporting 2” boom antennas,
such as the TH-11DX, Long John Monobanders and
other beams with a 2” boom. The BMC-249 allows mast
to extend past the top of the clamp. This feature allows
stacking of several antennas on one mast. Clamp is adjustable for mast sizes from
11/4” to 23/4” OD. The tilt-over feature permits easy assembly of the elements and
simplifies maintenance of the antenna. 4Wx4Hx11/4” thick. Kit comes
complete with stainless steel hardware.
Element Insulators These element insulators are made to fit the
element bracket (right). Precision injection molded with black UV resisted ABS plastic.
Part No.
Price
Fits these
Insulator
Fits Element to
Element sizes
Size
boom clamp
7
7
/16” OD
465216
$3.42
/8”OD x 23/4”
163409
5
461057
$4.40
/8” OD
11/4” OD x 3”
165919
7
463767
$4.40
/8” OD
11/4” OD x 3”
165919
465833
$4.80
11/4” OD
11/2” OD x 4”
165920
Hy-gain TH-series HF Beam Trap Caps
A. 464723, $.75 ea. Trap caps, for large Hy-gain TH-series traps. B
B. 466221, $1.59 ea. Trap caps for Hy-gain TH-3Jr. traps.
A
Hy-gain Vertical Antenna Mounting Hardware
A
B
C
D
E
F
12
A. 463011, $14.00, Base tube insulator, fits 11/4” OD tube. Six 5/16”
mounting holes. Super strong, made of fiberglass filled ABS. Used
in Hy-tower to isolate tower legs from ground. Tube not included.
B. 877130, $28.64, Vertical antenna bracket assembly. Includes
bracket (C), base cover insulator (D), support insulator (E) and
SO-239. Tube not included. Fits 11/4” tubing.
C. 160043-1, $11.84, Base mount bracket. Custom-tooled 1/8”
thick x 12 inch length aluminum bracket with vertical ridges for
super strength. Pre-punched holes for SO-239 or N-connector.
D. 863427, $6.90, Base cover insulator. Allows attachment of
base tube. Has hollow center for antenna connector. Mold-in pin
connects base tubing to connector.
E. 463056, $3.12, Base antenna support insulator. Made to fit top
support of antenna bracket (C). Hole fits 11/4” OD tubing.
F. 460316, $12.96, Tubing coupler/insulator. Used to couple/ insulate 1” tube to 7/8” tubing. Made of fiberglass filled ABS, 5” long.
Element to Boom Clamps
Made from high tensile strength aluminum alloy.
Custom die is used to stamp these clamps. No
miss-drilled holes. They fit perfect everytime.
Required 2 clamps per element. Element
Insulators available (left).
Element OD
Part# Price Boom
Description
Insulator
OD” w/o insulator w/insulator
5
1
/8”
--161409 $2.71 2”
2 /2x7”x.08 Thick, #12
None
7
7
/8”
/16”
163764 $3.80 2”
23/8x71/8”x.08 Thick, #4 465216
5
11/4”
/8”, 7/8” 31/4x71/4”x.125 Thick, #13 463767, 461057
165919 $5.32 2”
11/2”
11/4”
165920 $6.28 2”
31/4x91/2”x.125 Thick, #14 465833
3
--160055 $1.22 11/4” 7/16”
/4x5”x.063 Thick, #0
None
--161422 $3.63 11/4” 5/8”
21/2x61/2”x.08 Thick, #11 None
7
/16”
165141 $3.76 11/4” 7/8”
25/16x65/8”x.08 Thick, #12 465216
5
/8”, 7/8” 23/4x65/8”x.08 Thick, #1 463767, 461057
165138 $5.20 11/4” 11/4”
872223 $6.60 Stainless steel screws, nuts and washers for 1 set of element-to-boom clamp
Hy-Gain Tower Bases
Specially designed
for Hy-gain crankup towers.
Complete with base
hinge and foundation welded steel-cage. Specify
tower model. *Must be shipped
by truck, call for quote.
Model#
TB-37
TB-52
TB-54
TB-70
Tower
HG-37SS
HG-52SS
HG-54HD
HG-70HD
Price
Weight
$299.95 50 lbs.*
$299.95 80 lbs.*
$299.95 90 lbs.*
$349.95 102 lbs.*
Arrowpoint Anchor
APA-3, $14.95. Hygain’s Arrow Point
APA-3
Anchor is made of
$
95
high quality 13 gauge UPS14
Shippable
steel. This 3” Arrow
Point anchor has 36”
integral swiveling 1/8”
steel cable. Superior
pullout resistance, up to 2000 lbs. Use
this ArrowPoint anchor to secure antennas, towers, tarps, trees, carports, flagpoles and much more. Easy to install
with optional drive rod, DR-3, $29.95.
www.hy-gain.com • Toll-free 1-800-973-6572
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising