Embroidery Needle - Diamond Needle Corp.

Embroidery Needle - Diamond Needle Corp.
December 1, 2012
EN-12
60 Commerce Rd. – Carlstadt, NJ 07072
phone: 201-507-1771 toll free: 800-221-5818
fax: 201-507-1715 toll free : 800-833-3363
e-mail: info@diamondneedle.com
60 Commerce Rd. - Carlstadt, NJ 07072
tel: (201) 507-1771 - 800-221-5818
fax: (201) 507-1715 - 800-833-3363
email: info@DiamondNeedle.com
2
December 1, 2012
DB-K5SD1 PD: This needle has all of the features of the DBK5 sharp point needle with the addition of a small triangular
tip. This very small triangular tip improves the penetration
of hard materials like leather, by cutting the beginning of the
needle hole, for smoother stitching. It comes with a titanium
(PD) coating for longer life.
December 1, 2012
60 Commerce Rd. - Carlstadt, NJ 07072
tel: (201) 507-1771 - 800-221-5818
fax: (201) 507-1715 - 800-833-3363
email: info@DiamondNeedle.com
3
GUIDE TO SELECTING THE RIGHT NEEDLE
DB-K5NY: Tapered blade ny needles add strength to resist
pressure from all directions. A thinner size ny needle can
perform with the strength of a thicker size needle without
excessive needle breakage, fabric damage or needle holes.
For: MEISTERGRAM XL & XLC (Others use DB-K5 )
1906: This is the heavier shank needle with a special scarf for
the large bobbin Meistergram machines. It has a standard eye
to blade relationship. It is available in regular and ball point,
with chrome, Cool-Sew or PD/titanium finishes.
For: FINE KNITS
DPx5KN: This is the heavier shank needle with a slim blade,
larger eye and the longer, slimmer KN point. It is available in
size #9/65, with a Ball Point and PD/titanium finish. It works
well for sewing lettering or crisp designs on fine knits.
A comparison of strength: ordinary & ny needles.
For: CHAINSTITCH & CHENILLE
DBxK5 Q1 (NY): This is a modified version of the DB-K5
needle, made for the Janome MB4 and the Melco EP4. It has
a longer deeper scarf, a slim Xtra Light Ballpoint and an ny
blade. The longer deeper scarf allows the hook point to be
adjusted closer to the center of the thread loop and allows for
variations in registration from one needle position to the next.
The slim point reduces penetration resistance for smoother
piercing of the material. The ny blade strengthens the needle
allowing you to choose a thinner size. This all adds up to
smoother, sharper embroidery.
PH-C70: CEx3; This is the hook needle for chain stitching
with a flat spot on the shank, used in the Tajima.
PH-C70SB: CEx1; This is the hook needle with a Short Barb
for chenille with a flat spot on the shank , used in the Tajima.
287WKH: This was the first needle made specifically for
embroidery machines. It is a 16x257 needle with a larger eye
and a shorter point so that it will not drag across the previous
embroidery when laying down another layer of stitches.
PH-C120: This is the hook needle for chenille, with a smaller
hook opening to avoid snagging on delicate fabrics, with a flat
spot on the shank, used in the Tajima.
For: FINE KNITS
DBx1KN: This is a modified version of the 16x257 needle
specifically for sewing thin knit fabrics. It has a slender straight
blade with a longer, tapered Thin Ball point and a revised
profile around the eye. The slender, straight blade acts the
same as using a one size thinner needle. The longer taper of
the needle point and the special profile around the eye reduces
the penetration resistance and stress to fabrics to minimize
needle holes.
PHx7BA: 5935-40; This is the hook needle with the Singer
style hook. It is a good comprmise when you want to do Chain
Stitching and Chenille with the same needle. It has a flat spot
on the shank for use in the Tajima. Currently it is available in
size #19/120.
253: 137x1; This is the screw shank, hook needle for Chain
Stitching, used in Melco, Cornely, Singer 114, Consew 104 &
133, Treasure, etc.
253SB: 137x3; This is the screw shank, hook needle with a
DBxK23: This is the Large Eye version of the DBx1KN. It is a short barb for chenille, used in Melco, Cornely, Singer 114,
combination of the special features of the DBx1KN and DB-K5 Consew 104 & 133, Treasure, etc.
for embroidery.
DF-M20: This needle has all of the features of DBx1KN
needle with the addition of a flat shank and a longer scarf. It is
made specially for the Tajima Hem-Stitching machine.
4
60 Commerce Rd. - Carlstadt, NJ 07072
tel: (201) 507-1771 - 800-221-5818
fax: (201) 507-1715 - 800-833-3363
email: info@DiamondNeedle.com
December 1, 2012
FLAT SHANK NEEDLES
HAx130Spi: 130/705H-M; This special needle was designed
with a more acute (slimmer, sharper) point to reduce
penetration resistance. It can be used on Micro-Fiber
15x1: HAx1, 130/705H, SY2020, SY2031, 206x15, PFx130, materials, tightly woven fabrics and synthetic leathers.
canu 22:15; This is the standard needle with a flat shank and The slimmer, sharper point allows this needle to penetrate
a regular size eye for most home sewing machines and home hard fabrics smoothly.
sewer based embroidery and quilting machines. It has one
groove and a regular scarf. It is available in many sizes with a ELx705: This needle is made specifically for chain stitching
or cover stitching . It has 2 grooves, a slightly longer scarf
sharp or a ball point and a chrome or PD/titanium finish.
and a ball point. If your serger calls for a 15x1 needle and is
Ball Point: see page 2.
breaking threads, the 2nd groove on this needle may solve
your problem.
PD: tiatanium finish; see page 3.
15x2: HAx2, HAx1LL, 130/705H LL; This is the leather
15x1SP: HAx1SP, HAx1KN, 15x1KN; This is a special
point needle with a flat shank. It has all of the same features
version of the 15x1 for stretch or elastic materials and tightly as 15x1 with the addition of a lens shaped point to cut
woven knits. It is made to higher standards, it has a "snake's through leather and other heavy materials. Caution must be
head" shape due to a combination of a slightly bulged eye and used when changing to this needle! Extra space must be left
a slightly reduced blade above the eye.
between needle penetrations to avoid 'cutting out' the design.
The bulged eye opens a slightly larger space in the material
and the thinner blade above the eye reduces contact between
the material and the needle. This reduces friction and needle
heat-up and prevents skipped stitches. It is also available with
a ball point for all but the finest work.
15x1ST: HAx1ST, 130/705H-E; This is a special version of
the 15x1 for embroidery and decorative stitching . It is
made to higher standards for a longer life. It has an oversized
eye to reduce stress and tension on delicate embroidery
thread. It also accommodates metallic threads and makes
needle threading easier. It is available in sharp or ball point
and with chrome or PD/titanium finish.
HLx5: 130/705H-Q, 130/705H-J; This needle is made for
sewing hard, thick or heavy materials. It will sew through
multiple ply applications like quilting, jeans, applique or
heavy embroidery . It is actually an industrial needle with a
flat shank. If you are bending or breaking 15x1's, this needle
could solve your problem. They are available in either sharp
or ball point with a chrome or PD/titanium finish.
Hints & Tips:
High quality sewing of any kind is a very delicate balance.
Remember, when you change:
> The needle size or the eye size of the needle, you are
changing the tension on the top thread.
> The needle size you are changing the relationship of the
needle scarf to the point of the hook.
> The needle point you are changing the way the needle
penetrates the fabric.
HAx130 EBBR: This needle was developed for use in the
Brother PR-600 and Babylock EMB6 machines and the new
10 needle models (probably called PR-1000 and EMB10). It is
an industrial quality needle with a flat shank, reinforced blade, This is not just about needles! When you change thread,
light Ball Point and an oversized eye. It is available in a wide
backing, brand of blank product, digitzer or in some extreme
range of sizes with a hard chrome finish.
cases the color of the thread or blank garment you may also
affect the balance.
HAx130N: 130N; This special needle has a very long,
Need something not
almost double length, eye. It is made for Top-Stitching or
Decorative stitching and will accept heavy or multiple
shown?
threads. It can also be used for embroidery with heavy,
Call and Ask…
metallic threads . It is availble in chrome or PD/titanium
We stock 1000's of items
finish.
for Immediate Delivery!
December 1, 2012
Copyright 2009 by Diamond Needle Corp.
60 Commerce Rd. - Carlstadt, NJ 07072
tel: (201) 507-1771 - 800-221-5818
fax: (201) 507-1715 - 800-833-3363
email: info@DiamondNeedle.com
5
NEEDLE
TYPE
DESCRIPTION
AVAILABLE SIZES
PRICE PER
HUNDRED
PRICE PER
THOUSAND
DB-K5
DB-K5 BP
DB-K5 U
DB-K5 CS
DB-K5 BP CS
DB-K5 PD
DB-K5 BP PD
DB-K5 NY
DB-K5 BP NY
LARGE EYE
Regular Point
Ball Point
Heavy Ball Point
Reg. Point, Non-Stick
Ball Point, Non-Stick
Reg. Point, Titanium
Ball Point, Titanium
Reg. Point, Tapered
Ball Point, Tapered
8/60, 9/65, 10/70, 11/75, 12/80, 14/90, 16/100, 18/110
8/60, 9/65, 10/70, 11/75, 12/80, 14/90, 16/100, 18/110
11/75
8/60, 9/65, 10/70, 11/75, 12/80, 14/90, 16/100, 18/110
8/60, 9/65, 10/70, 11/75, 12/80, 14/90, 16/100
8/60, 9/65, 10/70, 11/75, 12/80, 14/90, 16/100, 18/110
8/60, 9/65, 10/70, 11/75, 12/80, 14/90, 16/100, 18/110
8/60, 9/65, 10/70, 11/75, 12/80, 14/90
8/60, 9/65, 10/70, 11/75, 12/80, 14/90
$17.25
$17.25
$17.25
$21.50
$21.50
$21.50
$21.50
$17.25
$17.25
$138.00
$138.00
$138.00
$172.00
$172.00
$172.00
$172.00
$138.00
$138.00
DB-K5 SS
DB-K5 SD1 PD
LEATHER POINT
Extra Narrow Wedge
Round Tri-Tip, Titanium
11/75, 12/80, 14/90, 16/100, 18/110
10/70, 11/75, 12/80, 14/90, 16/100, 18/110
$26.00
$29.50
$208.00
$236.00
DB-K5 KK
DB-K5 KK BP
SHORT SHANK
Regular Point
Ball Point
9/65, 10/70, 11/75, 12/80, 14/90
9/65, 10/70, 11/75, 12/80
$18.00
$18.00
$144.00
$144.00
DBx7ST
DBx7ST BP
METALLIC EYE
Regular Point
Ball Point
11/75, 12/80, 14/90, 16/100
11/75, 12/80, 14/90, 16/100
$28.50
$28.50
$228.00
$228.00
DBx9ST
EXTRA LARGE EYE
Ball Point
9/65, 11/75, 14/90
$28.50
$228.00
16x257
16x257 BP
16x257 CS
16x257 BP CS
16x257 PD
16x257 BP PD
16x257 NY
16x257 NY BP
16x257
REGULAR EYE
Regular Point
Ball Point
Reg. Point, Non-Stick
Ball Point, Non-Stick
Reg. Point, Titanium
Ball Point, Titanium
Reg. Point, Tapered
Ball Point, Tapered
Leather Point
8/60, 9/65, 10/70, 11/75, 12/80, 14/90, 16/100, 18/110
8/60, 9/65, 10/70, 11/75, 12/80, 14/90, 16/100, 18/110
10/70, 11/75, 12/80, 14/90, 16/100, 18/110
10/70, 11/75, 12/80, 14/90, 16/100, 18/110
8/60, 9/65, 10/70, 11/75, 12/80, 14/90, 16/100, 18/110
8/60, 9/65, 10/70, 11/75, 12/80, 14/90, 16/100, 18/110
9/65, 10/70, 11/75, 12/80, 14/90
9/65, 10/70, 11/75, 12/80, 14/90
Use: DB-K5 SS or DB-K5 SD1 PD
$17.25
$17.25
$21.50
$21.50
$21.50
$21.50
$17.25
$17.25
$138.00
$138.00
$172.00
$172.00
$172.00
$172.00
$138.00
$138.00
287WKH
287WKH BP
287WKH CS
287WKH BP CS
287WKH PD
287WKH BP PD
SHORT POINT
Regular Point
Ball Point
Reg. Point, Non-Stick
Ball Point, Non-Stick
Reg. Point, Titanium
Ball Point, Titanium
8/60, 9/65, 10/70, 11/75, 12/80, 14/90, 16/100, 18/110
8/60, 9/65, 10/70, 11/75, 12/80, 14/90, 16/100, 18/110
10/70, 11/75, 12/80, 14/90, 16/100, 18/110
10/70, 11/75, 12/80, 14/90, 16/100
9/65, 10/70, 11/75, 12/80, 14/90
9/65, 10/70, 11/75, 12/80, 14/90
$23.50
$23.50
$31.00
$31.00
$31.00
$31.00
$188.00
$188.00
$248.00
$248.00
$248.00
$248.00
YOU MAY MIX TYPES & SIZES TO GET THE "THOUSAND PRICE"
We also carry all other types and sizes of Sewing Machine Needles
60 Commerce Rd. - Carlstadt, NJ 07072
tel: (201) 507-1771 - 800-221-5818
fax: (201) 507-1715 - 800-833-3363
email: info@DiamondNeedle.com
6
December 1, 2012
NEEDLE
TYPE
DESCRIPTION
AVAILABLE SIZES
PRICE PER
HUNDRED
PRICE PER
THOUSAND
DBx1KN
Slim Ball Point
DBx1KN BP
DBxK5Q1
USED
FOR
9/65, 10/70, 11/75, 12/80, 14/90
$21.50
$172.00
Slim Ball Point
9/65, 10/70, 11/75, 12/80, 14/90
$21.50
$172.00
Fine Knits
Light Ball Point
8/60, 9/65, 10/70, 11/75, 12/80
$17.25
$138.00
MB4, EP4
DBxK5Q1-NY
Light Ball Point
8/60, 9/65, 10/70, 11/75, 12/80
$17.25
$138.00
MB4, EP4
DBxK5Z1
Light Ball Point
10/70, 11/75, 12/80, 14/90
$17.25
$138.00
Foam
DBxK5Z1 PD
Light Ball Point, Titanium
10/70, 11/75, 12/80, 14/90
$21.50
$172.00
Foam
DBxK23
Regular Point, Knit
9/65, 10/70, 11/75, 12/80
$23.50
$188.00
Fine Knits
DBxK23 BP
Ball Point, Knit
9/65, 10/70, 11/75, 12/80
$23.50
$188.00
Fine Knits
DBxK23 PD
Reg. Point, Knit, Titanium 9/65, 10/70, 11/75, 12/80
$28.50
$228.00
Fine Knits
DF-M20
Hem Stitch
10/70, 11/75, 12/80, 14/90
Hook Needles For: Tajima Chainstitch
$37.50
$300.00
Hem Stitch
Chainstitch
Fine Knits
PH-C70
Chainstitch
11/75, 14/90, 16/100, 18/110, 19/120, 21/130
$168.50
$1,348.00
PH-C70SB
Chenille (Short Barb)
16/100, 18/110, 19/120
$168.50
$1,348.00
Chenille
PH-C120
Smaller Hook Opening
11/75, 14/90, 16/100
$192.50
$1,540.00
Fine Chenille
PHx7BA (5935-40)
Singer Style
19/120
Hook Needles For: Melco, Cornely, Singer 114, Consew 104 & 133, Treasure, etc.
$168.50
$1,348.00
Combination
253 (137x1, PHx1)
Chainstitch
2/12/80, 3/14/90, 4/16/100, 5/18/110, 6/19/120, 7/21/130
253SB (137x3, PHx1SM) Chenille (Short Barb)
4/16/100, 5/18/110, 6/19/120
For: Original Meistergram XL & XLC
$115.00
$920.00
Chainstitch
$115.00
$920.00
Chenille
1906
Regular Point
8/60, 9/65, 10/70, 11/75, 12/80, 14/90, 16/100, 18/110
$18.00
$144.00
Heavy Shank
1906 BP
Ball Point
8/60, 9/65, 10/70, 11/75, 12/80, 14/90, 16/100, 18/110
$18.00
$144.00
Heavy Shank
1906CS
Reg. Point, Cool Sew
10/70, 11/75, 12/80
$23.50
$188.00
Heavy Shank
1906 BP CS
Ball Point, Cool Sew
10/70, 11/75, 12/80
$23.50
$188.00
Heavy Shank
1906 PD
Reg. Point, Titanium
11/75
$23.50
$188.00
Heavy Shank
1906 BP PD
Ball Point, Titanium
11/75
$23.50
$188.00
Heavy Shank
DPx5KN PD
Knit Point, Titanium
9/65
$39.50
$316.00
Heavy Shank
December 1, 2012
60 Commerce Rd. - Carlstadt, NJ 07072
tel: (201) 507-1771 - 800-221-5818
fax: (201) 507-1715 - 800-833-3363
email: info@DiamondNeedle.com
7
NEEDLE
DESCRIPTION
AVAILABLE SIZES
TYPE
PRICE PER PRICE PER
USED
HUNDRED THOUSAND
FOR
15x1, HAx1, 130/705H
Regular Point
9/65, 10/70, 11/75, 12/80, 14/90, 16/100, 18/110, 20/125
$12.50
$100.00
15x1, HAx1 BP
Ball Point
9/65, 10/70, 11/75, 12/80, 14/90, 16/100, 18/110
$12.50
$100.00
Standard
Standard
15x1, HAx1 PD
Regular Point, Titanium
9/65, 10/70, 11/75, 12/80, 14/90, 16/100, 18/110
$49.50
$396.00
Standard
15x1, HAx1 BP PD
Ball Point, Titanium
9/65, 10/70, 11/75, 12/80, 14/90, 16/100, 18/110
$49.50
$396.00
Standard
15x1SP
Regular Point, Elastic
11/75, 14/90
$27.50
$220.00
Elastic
15x1SP BP
Ball Point, Elastic
11/75, 14/90
$27.50
$220.00
Elastic
15x1ST, 130/705H-E
Regular Point, Large Eye
11/75, 12/80, 14/90
$27.50
$220.00
Embroidery
15x1ST BP
Ball Point, Large Eye
11/75, 12/80, 14/90
$27.50
$220.00
Embroidery
15x1ST PD
Reg. Pt., Lg. Eye, Titanium 11/75, 12/80, 14/90
$59.50
$476.00
Embroidery
15x1ST BP PD
Ball Pt., Lg. Eye, Titanium
11/75, 12/80, 14/90
$59.50
$476.00
Embroidery
15X2, 130/705H LL
Leather Point
11/75, 14/90, 16/100, 18/110
$29.50
$236.00
Leather
ELx705
Light Ball Point
11/75, 12/80, 14/90
$34.10
$272.80
Chain Stitch
HAx1KN
Slim, Ball Point
11/75, 14/90
$27.50
$220.00
Fine Knits
HAx130EBBR
Light Ball Point
9/65, 10/70, 11/75, 12/80, 14/90
$39.50
$316.00
PR-600, EMB6
HAx130N
Regular Point
12/80, 14/90, 16/100
$39.50
$316.00
Top Stitch
HAx130N PD
Regular Point, Titanium
12/80, 14/90, 16/100
$59.50
$476.00
Top Stitch
HAx130SPi
Slim, Sharp Point
8/60, 9/65, 10/70, 11/75, 12/80, 14/90
HLx5
Regular Point
9/65, 10/70, 11/75, 12/80, 14/90, 16/100, 18/110
$28.50
$228.00
Quilting
HLx5 BP
Ball Point
9/65, 10/70, 11/75, 12/80, 14/90, 16/100, 18/110
$28.50
$228.00
Quilting
HLx5 PD
Regular Point, Titanium
9/65, 10/70, 11/75, 12/80, 14/90, 16/100, 18/110
$59.50
$476.00
Quilting
HLx5 BP PD
Ball Point, Titanium
9/65, 10/70, 11/75, 12/80, 14/90, 16/100, 18/110
$59.50
$476.00
Quilting
8
60 Commerce Rd. - Carlstadt, NJ 07072
tel: (201) 507-1771 - 800-221-5818
fax: (201) 507-1715 - 800-833-3363
email: info@DiamondNeedle.com
$18.50
$148.00
Micro-Fiber
December 1, 2012
System
BLx1
Blx1
Point Sizes
9, 10, 11, 12, 14, 16, 18, 20, 21, 22
BP
9, 10, 11, 12, 14, 16
BLx2N
11, 14
BLx4
11, 14
Comments
Price/100
$29.75
$29.75
$34.95
JLx2
$38.95
DCx1F
DCx1F
BP
9, 10, 11, 12, 14, 16, 18
11, 14, 16
ELx705
BP
11, 12, 14
Cover Stitch, SY2922
$34.10
JLx1
JLx1
BP
9, 10, 11, 12, 14, 16
11, 14
SY2053
SY2053
$33.50
$33.50
JLx2
11, 14
BLx4
$38.95
SLx75
See SY2054
$39.00
SY2053
See JLx1
$33.50
SY2054
SY2054
BP
10, 11, 12, 14, 16
10, 11, 12, 14, 16
$44.90
$44.90
SLx75, 16x75
SLx75, 16x75
$39.00
$39.00
SY2922
See ELx705
$34.10
TEx1
11, 14, 16
$23.50
60 Commerce Rd. - Carlstadt, NJ 07072
tel: (201) 507-1771 - 800-221-5818
fax: (201) 507-1715 - 800-833-3363
email: info@DiamondNeedle.com
December 1, 2012
9
60 Commerce Rd. - Carlstadt, NJ 07072
tel: (201) 507-1771 - 800-221-5818
fax: (201) 507-1715 - 800-833-3363
email: info@DiamondNeedle.com
10
December 1, 2012
Premium Lilly White Oil
Thread Tension Gauge
Have consistant
tension on all of your
top threads!
The right
lubricating oil
to keep machines
in top performance.
Bobbin Case Tension Gauge
Lilly White
Stainless
#EW351
#EW350
#EW340
One Quart
One Gallon
Five Gallon Drum
ZOOM-SPOUT
OILER with a flexible ,
extendable spout for
all of those hard to
to reach places.
for setting the tension on your
bobbin case thread
INSTRUCTIONS INCLUDED!
#TM-1 Regular (size L)
$69.50 ea.
#TM-3 Jumbo (size M)
$69.50 ea.
ALBA5 SPRAY LUBE
$8.95
$19.50
$91.20
#TTG
PRECISION Needle Point OILER
Refillable needle oiler (1/2 oz)
One precise drop of oil where needed
$18.65 ea.
Canned Air
DRY Air-in-a-Can
To clean and dust
sensitive electronics.
Aerosol Clear Oil
Precision metered
release of oil
with
4 oz.
clear
oil
One measured
spray of oil
at a press of button
12 cans
per
12 cans
6.84 oz. (194gr)
per can
case
per
case
#ZS-4
#EW2132 $2.75 ea.
$2.25 ea. (In lots of 12 )
$1.40 ea.
STEEL
$.41 ea.
12 cans per case
#A1340
BOBBINS
$19.50/100
$6.95 ea.
#A1605
for MELCO: EP-1, Premier, Stellar
for Tajima: #M1057B, #ME0504000000, #TME-5004, #ME0504020000
for Barudan: #B-0171, #2241F, #KF220410
for Brother: #S17095-0-01
ALUMINUM
$.60 ea.
#764125-03, #854242-72
$.36 ea. (steel)
$.10 ea. (plastic)
$42.50/100
for Tajima: #M1057BA, #ME0504000000A, #ME0504020000A
for Barudan: #B-0171A, #2241FA, #KF220410A
BOBBIN CASE for MELCO: EP-1, Premier, Stellar
$6.70 ea.
#764125-03P, #385242-72P
BOBBIN CASE for SWF
plain bobbin case
with pigtail
NO-BACKLASH Bobbin Case
$5.75 ea.
$3.25 ea. in boxes of 50
#854242-71
#716-505-000
$5.95 ea.
#04035AF-A001
BOBBIN CASES for HAPPY (size L)
with No-Back-Lash spring
& regular pigtail
#MPZ-00080
#MPZ01810
#MPZ-00550NBL
$7.15 ea.
$4.50 ea.
In boxes
of 50
plain bobbin case
with hooked wire
instead of pigtail
$5.95 ea.
#HSA-04020
$3.40 ea.
#HSA-04030
in boxes
#ESMPZ01810
of 50
60 Commerce Rd. - Carlstadt, NJ 07072
tel: (201) 507-1771 - 800-221-5818
fax: (201) 507-1715 - 800-833-3363
December 1, 2012
email: info@DiamondNeedle.com
11
HOOP ADJUSTING SCREWS
HEX
KNURLED
To fit original Tajima, Brother and Toyota Hoops!
# MFHS1 (23 mm) Medium
# MFHS2 (27 mm) Long
# MFHS3 (19 mm) Short
$1.15 each
($.90 each in lots of 100 or more)
CLIP FITTING
To fit original Tajima, Brother and Toyota Hoops!
# HS-S, (SIPF-19SC, SPF190000000, S19850-0-01) Short
# HS-M, (SIPF-23SC, SPF230000000, S19851-0-01) Medium
# HS-L, (SIPF-27SC, SPF270000000, S19852-0-01) Long
$1.15 each
for clamping loose material
when doing caps or T-shirts
($.90 each in lots of 100 or more)
ROLLER BASE SET
for holding cap frames to
machines or fixtures
$5.50 ea.
#WH0323S00000
#HF0206000000
#HF-2008
$1.10 ea.
$3.95 ea.
(in lots of 100)
Cleaning Brushes
Nylon Bristle Double End Brush
Cleans all of those hard to reach places
BR1
$ .45 ea.
Nylon Bristle Single End Ecconomy Brush
BR2
$ .32 ea.
Thread Picker
Convenient 6" overall length, sharp angled point tool with finger loop. Gets under the finest stitches
to pickup the finest threads. Hardened steel for long life.
L-4656
$2.75 ea.
Hand~Mates
60 Commerce Rd. - Carlstadt, NJ 07072
tel: (201) 507-1771 - 800-221-5818
fax: (201) 507-1715 - 800-833-3363
12
email: info@DiamondNeedle.com
December 1, 2012
Cordless (rechargable) Electric Cutter
6" Clamping Pliers
~ Operates for 40
continuous minutes
on one charge
~ Ergonomic design
forged
stainless
steel
#EW166
$4.95
Deluxe Bent 6" Stainless Steel Tweezer
~ Charger & charging
base included
#MTR
#MTR-BLADES
5 1/2" Seam Rippers
$ 34.95 ea.
$ 22.50/ 2 pack
POCKET RULERS
$1.25 ea.
#112R
Cutlery Steel w/Plastic Ball
Sure-Grip Textured Handle
ribbed with guide pin
#TWE6
$1.60
Tweezer & Magnifier Combination
#300/1
Inches
#TWE-MAG
$4.95
FOLDING MAGNIFIER
$1.40 ea.
1" x 1"
$1.95
#114R
Stainless Steel Razor Sharp Blade
Plastic Safety cover
#300ME
Metric
#UTC3
$7.50
LUMOCOLOR Permanent FINE Point Pens
$1.25 ea.
#115R
Cutlery Steel w/Plastic Ball
Ribbed Handle won't Roll off table
Curved Blade Push Snip
Eight bright colors for touching-up
white threads that pull through.
Ribbed Stainless Steel
Spring Action
Light Weight
Each set contains
eight pens in a stand-up box!
#318WP8
$13.52/set
#CN1
$4.95 ea.
THREAD NIPPERS
#TC800
$2.55 ea.
packed twelve nippers to a sleeve
#TC50
$.45 ea.
comes in five colors: Blue, Turquoise, Orange, Purple, Red
60 Commerce Rd. - Carlstadt, NJ 07072
tel: (201) 507-1771 - 800-221-5818
fax: (201) 507-1715 - 800-833-3363
December 1, 2012
email: info@DiamondNeedle.com
13
Belmont Scissors
- made in Italy
- forged steel with black handles
Part #
#571/6I
#571/7I
#571/8I
#571/9I
Length
6" - 152mm
7" - 178mm
8" - 203mm
9" - 229mm
Cut
2 5/8" - 67mm
3 1/4" - 83mm
3 7/8" - 98mm
4 3/8" - 111mm
$9.25
$9.85
$11.00
$13.60
Ambedexterous UTILITY SHEARS
Stainless Steel Blades
Serated lower blade to grab most fabrics
Unbreakable Plastic Handles
High Leverage, Light Weight
Large Comfortable Finger Rings
Blunted Tips for Safety
#Belmont USS/175
7" - 175mm 2" - 50mm
$9.60
Adjustable Ring
SPECIALTY APPLIQUE SCISSORS
for detailed trimming
Vinyl Coated, Adjustable Rings
Sharp Points
Finely Tapered Curved Blades
Ice-Tempered Stainless Steel
#803/3C
#804/4C
$13.25 ea.
Curved Blades Mini 3-1/2" / 89mm 1" / 25mm
Curved Blades Long 4-1/2" / 114mm 1-1/4" / 31mm
Small, Heavy Professional scissor for light Tailoring tasks
Forged Steel
2" cut
Nickel plated blades with sharp points
Black Handles
Adjustable screw pivot
#275/5B
$12.50 each
Straight Embroidery Scissors
Forged steel
Finely tapered blades
Double sharp points
#735/3-1/2
#735/5
#735/6
$7.20 each
$9.00 each
$9.55 each
60 Commerce Rd. - Carlstadt, NJ 07072
tel: (201) 507-1771 - 800-221-5818
fax: (201) 507-1715 - 800-833-3363
14
email: info@DiamondNeedle.com
June 1, 2012
Belmont Scissors
MADE IN ITALY
#290/4I (4 inch length) ………….. $7.95 ea.
#290/5I (5 inch length) ………….. $7.95 ea.
$3.87 ea.
$5.45
$5.45
$5.45
June 1, 2012
60 Commerce Rd. - Carlstadt, NJ 07072
tel: (201) 507-1771 - 800-221-5818
fax: (201) 507-1715 - 800-833-3363
email: info@DiamondNeedle.com
15
Diamond Needle Corporation
60 Commerce Rd
Carlstadt, NJ 07072
phone: 201-507-1771 - 800-221-5818
fax: 201-507-1715 - 800-833-3363
Copywrite 2012, Diamond Needle Corporation, Carlstadt, NJ 07072
info@DiamondNeedle.com
www.DiamondNeedle.com
December 1, 2012
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising