Unvented and Vented Stainless Hot Water Cylinders www.joule

Unvented and Vented Stainless Hot Water Cylinders www.joule
Unvented and Vented Stainless
Hot Water Cylinders
www.joule-pl.pl
Introduction
Joule was formed in 2008 to offer the heating,
plumbing and hardware merchant network a service that was based on product expertise and
knowledge, large stock holding, short delivery
times and a nationwide distribution network. The
strength of this offering can be seen in the quality
and innovation of our product range in renewables, hot water production & storage. From humble
beginnings Joule rapidly grew to become Ireland’s
premier supplier of solar thermal and hot water
storage solutions.
In 2010 Joule opened its fast manufacturing facility in Dublin. This facility had an output capacity
of 24,000 units per annum working on a single
shift per day. Along with the manufacturing, Joule
also opened Irelands most advanced solar thermal
training centre. Joule believe that we must work
with all stakeholders in providing the customer
an outstanding service and investing in training
for installers is just another small example of this
philosophy.
In 2011 Joule opened its first distribution centre in
Cheshire, UK. The UK arm of the Joule Group is
rapidly expanding. With Joule’s innovative product
range and drive for excellence in customer service,
demand is quickly growing through our Cheshire
distribution centre. Joule UK is continuing to offer
customers excellence in product & service and
the result of this will help Joule UK to become one
of the UK’s favourite Solar Thermal & Hot Water
Storage suppliers.
Joule Poland is the Joule Group’s latest development. Demand for high quality stainless steel hot
water storage cylinders is rising across Europe
and particularly in Poland. Joule’s product range
is proving very popular and to meet this demand
the Joule Group has recently opened a distribution
centre in Poland. This demand is a testament to
Joule’s quality in both product and service.
NSAI Agrément
NSAI_Certification_1Col
NSAI_Agrement_2Col
NSAI_Agrement_1Col
NSAI_Certification_Blk
NSAI_Agrement_Rev
NSAI_Agrement_Blk
ification_Wht
All white version also available: NSAI_Agrement_Wht
3 / 20
Key advantages
Cyclone
Responding rapidly to changing market expectations we have evolved the Joule Cyclone vented
and unvented stainless steel cylinders. All our
Cylinders are formed from stainless steel, continuing our phylosophy of only using the finest
materials. We are so confident in our construction
that we offer a 25 year limited guarantee* on most
of the Cyclone range. To keep a breast with developments the Joule Cyclone range has many key
advantages.
Domestic Selection Sizing Guide
These recommendations are based on the guidelines in BS 6700. Guidance should be sought for
unusual applications, e.g. high flow rate showers,
large baths, etc.
Hot Water Demand
Bedrooms
Gas / Oil Indirect
Units
Electric Indirect
Units
1 Standard Bath or
Shower
Bedsit / 1 Bed
150
150
2-3 Bed
150
200
3-4 Bed
150
200
2-3 Bed
150
200
3-4 Bed
150
200
2-3 Bed
150
200
3-4 Bed
150
200
4-5 Bed
200
200
2-3 Bed
200
200
3-4 Bed
200
200
4-5 Bed
200
250
3-4 Bed
250
300
4-5 Bed
250
300
5-6 Bed
300
300
1 Standard Bath
Butt Welding
1 Bath & En-Suite
All Cyclone cylinders are butt seam welded, this
gives greater rigidity and removes the threat of
crevice corrosion associated with some cylinders.
Flexible Connections
Joule recognise that sometimes the need for 1” hot
& cold connections with adaptable 3/4” fitting is a
key way forward for the installer.
Key to ensuring the cylinder works and performs
to its optimal ability is the sensor pockets, these
determine how the unit calls for heat from the
external source. The Cyclone has 10mm solar sensor pockets ensuring the probets from the solar
fit correctly and effectively, we also ensured the
aquastat pocket is produce to flair out holding the
stat firmly in place
Coils
With the continued introduction of heat sources
Joule has looked closely at the best possible
option for coils within the Cyclone Range, we use
both conventional rigid plain tube and CSST high
effiency coil to ensure all our units perform to the
highest possible standards, this flexibility ensures
Joule can produce any heat surface area required.
T
JOULE PL
+48 (0) 128811171
3 Standard Baths
Commercial Selection Sizing Guide
Sensor Pockets
2 Standard Baths
F +48 (0) 814709046
These recommendations are based on the guidelines in BS 6700. Guidance should be sought for
unusual applications, e.g. high flow rate showers,
large baths, etc.
Typical Commercial Application
Large House
Indirect Units
6 Bed / 4 Bathrooms
400
Guest House
8 Bed / 4 Bathrooms
2 x 300
Small Hotel
8 Bed / 8 Bathrooms
3 x 200
Sports Pavilion
25 People / 4 Showers
2 x 300
Sports Pavilion
25 People / 6 Showers
3 x 200
Students House
25 People / 3 Bathrooms
3 x 300
Old People’s Home
60 People / 10 Showers
5 x 300
(each supplying 2 bathrooms)
Selecting the correct size of cylinder requires consideration of a nuber of variables, including the
volume of water needed, the energy source and the
space available. Calculating the colume needed
can be achieved by adding together the individual
volumes of each appliance that uses hot water and
how frequently it is used. The energy source is the
next variable to consider, as it will have a direct
impact on the cylinder size.
E biuro@joule-pl.pl
W www.joule-pl.pl
Direct
efficient electrically heated hot water
1” Adaptable Hot Water Draw
1/2” T&P Relief Valve (fitted)
3/4” Secondary Return
Immersion Heater
1” Adaptable Cold Water Inlet
Cyclone Direct
These cylinders are designed to work with electricity only. The water is heated using electrical
elements and they do not have any ability to heated
by oil or gas boilers.
Immersion Heater
Technical Information
PSM11150/D
PSM11155/D
PSM11160/D
PSM13660/D
PSM15660/D
PSM15771/D
PSM19071/D
Volume (l)
125
150
200
250
300
400
500
Height (mm)
1110
1110
1110
1360
1560
1570
1900
Diameter (mm)
500
550
600
600
600
710
710
Weight Empty (kg)
28
32
36
45
49
64
77
Insulation (mm)
50
50
40
40
40
50
50
Reheat Time of 3/4 Cold Water
Reheat Time of 3/4 Cold Water (3 kW Immersion)
EN12897 Heat Exchange kW
Dedicated Solar Volume
Standard Standing Loss kWh/Day
1
Temperature
and Pressure
Relief Valve
5 / 20
T
-
-
-
-
-
-
-
48
63
91
118
141
175
222
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1.23
1.41
1.8
2.15
2.28
2.41
2.54
3 kW Incoloy Immersion
6 kW Incoloy Immersion
9 kW Incoloy Immersion
• Intermittent Use
• Soft Water
• Intermittent Use
• Quick Recovery
• Soft Water
• Intermittent Use
• Quicker Recovery
• Soft Water
3 kW Titanium Immersion
6 kW Titanium Immersion
9 kW Titanium Immersion
• High Use
• Hard Water
• High Use
• Quick Recovery
• Hard Water
• High Use
• Quicker Recovery
• Hard Water
0
Expansion
Vessel
JOULE PL
+48 (0) 128811171
0
0
High Flow Rate
Inlet Control Set
Dual Thermostat
F +48 (0) 814709046
2
Incoloy Long
240V 3kW
Immersion
Heater
0
15/22 Tundish
0
0
22mm
Thermostatic
Mixing Valve
E biuro@joule-pl.pl
Expansion
Vessel Hose
W www.joule-pl.pl
0
22 mm 2 Port
Motorzed
Diverting Valve
Indirect
efficient indirectly heated hot water
1” Adaptable Hot Water Draw
1/2” T&P Relief Valve (fitted)
3/4” Secondary Return
3/4” Boiler Return
Plain Aquastat Pocket
3/4” Boiler Return
1” Adaptable Cold Water Inlet
Indirect
These cylinders are designed to be heated indrectly using of an oil or gas boiler. They come complete
with one electric Element to intermittently support
the water heating system.
Immersion Heater
Technical Information
PSM11150
PSM11155
PSM11160
PSM13660
PSM15660
PSM15771
PSM19071
Volume (l)
125
150
200
250
300
400
500
Height (mm)
1110
1110
1110
1360
1560
1570
1900
Diameter (mm)
500
550
600
600
600
710
710
Weight Empty (kg)
32
36
42
51
55
73
88
Insulation (mm)
50
50
40
40
40
50
50
Reheat Time of 3/4 Cold Water
19
21
26
26
32
35
35
Reheat Time of 3/4 Cold Water (3 kW Immersion)
48
63
91
118
141
175
222
EN12897 Prim. Heat Exchng (kW)
16
16
18
22
22
28
35
-
-
-
-
-
-
-
Coil Surface (m2)
0.58
0.58
0.7
0.7
1.2
1.3
1.4
Standard Standing Loss (kWh/Day)
1.23
1.41
1.8
2.15
2.28
2.41
2.54
EN12897 Solar Heat Exchng (kW)
1
Temperature
and Pressure
Relief Valve
7 / 20
T
0
Expansion
Vessel
JOULE PL
+48 (0) 128811171
0
0
High Flow Rate
Inlet Control Set
Dual Thermostat
F +48 (0) 814709046
1
Incoloy Long
240V 3kW
Immersion
Heater
0
15/22 Tundish
0
0
22mm
Thermostatic
Mixing Valve
E biuro@joule-pl.pl
Expansion
Vessel Hose
W www.joule-pl.pl
0
22 mm 2 Port
Motorzed
Diverting Valve
Twin Coil
efficient solar supported indirectly heated hot water
1” Adaptable Hot Water Draw
1/2” T&P Relief Valve (fitted)
Plain Solar Sensor
3/4” Boiler Flow
3/4” Secondary Return
Plain Aquastat Pocket
3/4” Boiler Return
Immersion Heater
3/4” Solar Flow
Plain Aquastat Pocket
Plain Solar Sensor
1” Adaptable Cold Water Inlet
3/4” Solar Return
Twin Coil
These cylinders are designed to be heated indrectly using of an oil or gas boiler. They come complete
with one electric Element to intermittently support
the water heating system.
Eco80
With the requirement for more energy efficient solutions, Joule offer the full Cyclone range with Eco80
specification. The eco 80 range increasea insulation thickness to 80mm nominal.
Technical Information
9 / 20
PSM11160/S
PSM13660/S
PSM15660/S
PSM15771/S
PSM19071/S
Volume (l)
200
250
300
400
500
Height (mm)
1110
1360
1560
1570
1900
Diameter (mm)
600
600
600
710
710
Weight Empty (kg)
45
55
60
76
89
Weight Full (kg)
245
245
360
476
589
Insulation (mm)
40
40
40
50
50
Reheat Time of 3/4 Cold Water
26
26
32
35
35
Reheat Time of 3/4 Cold Water (3 kW Immersion)
91
118
141
175
222
EN12897 Prim. Heat Exchng (kW)
18
22
22
28
35
EN12897 Solar Heat Exchng (kW)
16
18
18
22
22
Dedicated Solar Volume (l)
110
135
160
210
260
Solar Coil Surface (m )
0.7
0.7
1.2
1.3
1.4
Primary Coil Surface (m2)
0.58
0.77
0.8
1.02
1.28
Standard Standing Loss (kWh/Day)
1.8
2.15
2.28
2.41
2.54
Eco80 Standing Loss (kWh/Day)
1.59
1.69
1.91
2.15
2.25
2
When using Eco80, dimensions will change to allow for extra insulation.
1
Temperature
and Pressure
Relief Valve
T
0
Expansion
Vessel
JOULE PL
+48 (0) 128811171
0
0
High Flow Rate
Inlet Control Set
Dual Thermostat
F +48 (0) 814709046
1
Incoloy Long
240V 3kW
Immersion
Heater
0
15/22 Tundish
0
0
22mm
Thermostatic
Mixing Valve
E biuro@joule-pl.pl
Expansion
Vessel Hose
W www.joule-pl.pl
0
22 mm 2 Port
Motorzed
Diverting Valve
Triple Coil
efficient solar supported indirectly heated hot water
complete with auxiliary heating coil
1” Adaptable Hot Water Draw
Plain Solar Sensor
T&P Relief Valve (fitted)
3/4” Boiler Flow
1” Boiler Flow
Plain Aquastat Pocket
1” Boiler Return
3/4” Secondary Return
3/4” Boiler Return
Immersion Heater
3/4” Solar Flow
Plain Aquastat Pocket
Plain Solar Sensor
3/4” Solar Return
Triple Coil
Joule Cyclone triple coil cylinders have been
designed specifically with multi fuel applications
in mind. Featuring a purpose designed solar coil,
which allows maximum heat transfer of solar energy
into the stored water and a 28mm (1”) gravity coil
which facilitates the use of gravity fed solid fuel
systems. The cylinders are suitable for use with a
wide range of solar systems now available and are
1” Adaptable Cold Water Inlet
an efficient and environmentally friendly way of
providing domestic hot water. Combine this with
the use of excess heat from your solid fuel system
during winter, this cylinder allows you to optimise
the use of heat during both summer and winter.
Cyclone triple coil cylinders also offer the benefit of
mains pressure hot water - powerful showers and
fast filling baths.
Technical Information
PSM11160/3
PSM13660/3
PSM15660/3
PSM15771/3
PSM19071/3
Volume (l)
200
250
300
400
500
Height (mm)
1110
1360
1560
1570
1900
Diameter (mm)
600
600
600
710
710
Weight Empty (kg)
50
59
67
83
96
Insulation (mm)
40
40
40
50
50
Weight Full (kg)
250
309
363
480
594
Reheat Time of 3/4 Cold Water
26
26
32
35
35
Solar Coil Surface (m )
0.7
0.7
1.2
1.3
1.4
2
Primary Coil Surface (m )
0.58
0.77
0.8
1.02
1.28
Secondary Coil Surface (m2)
0.58
0.58
0.58
0.58
0.58
Dedicated Solar Volume (l)
110
135
160
210
260
Standard Standing Loss (kWh/Day)
1.8
2.15
2.28
2.41
2.54
2
1
Temperature
and Pressure
Relief Valve
11 / 20
T
0
Expansion
Vessel
JOULE PL
+48 (0) 128811171
0
0
High Flow Rate
Inlet Control Set
Dual Thermostat
F +48 (0) 814709046
1
Incoloy Long
240V 3kW
Immersion
Heater
0
15/22 Tundish
0
0
22mm
Thermostatic
Mixing Valve
E biuro@joule-pl.pl
Expansion
Vessel Hose
W www.joule-pl.pl
0
22 mm 2 Port
Motorzed
Diverting Valve
Thermal Store
incorporating mains pressure (boosted) domestic hot water
Hot Water Draw
Aquastat Pocket
1” Connection
1” Connection
1” Connection
1” Connection
Aquastat Pocket
Link 1”
1” Connection
1” Connection
Immersion Heater
Aquastat Pocket
Link 1”
Solar 3/4” Flow
Solar Sensor
Aquastat Pocket
1” Connection
DHW 1” Flow
Triple Coil
The Joule Copper and Stainless Steel Thermal Stores
are the next generation of heating and hot water production. The Joule thermal store has been designed
with multi fuel heating systems in mind. The cylinder allows an easy installation of solid fuel, solar and
boiler easily and effectively. The thermal store allows
pressurised hot water heated from solid fuel safely
and fully compliant with current plumbing practices
Solar 3/4” Return
1” Connection
and standards. The tank operates like a hot water cylinder in reverse. The tank is completely full of heating
system water, the domestic hot water flows through a
network of coils up through the centre of the tank supplying you with high flow rate pressurised hot water at
piping hot temperatures. The thermal store is ideally
suited to providing solar heat support and domestic hot
water production simultaneously and easily.
Technical Information
TSS-250/S
TSS-300/S
TSS-400/S
TSS-500/S
Volume (l)
250
300
400
500
Height (mm)
1360
1560
1570
1900
Diameter (mm)
600
600
710
710
Weight Empty (kg)
55
60
76
89
Insulation (mm)
50
50
50
50
187.5
225
300
375
1st Hour Hot Water (l/h) 50 °C
Max Flow Rate (l/min) 50 °C
17
20
22
24
Dedicated Solar Volume (l)
135
160
210
260
Standing Loss Cylinder (kWh/Day)
1.9
2.0
2.41
2.54
Solar Coil Surface (m )
1.15
1.15
1.2
1.3
Primary Coil Surface (m2)
2.30
2.30
2.30
3.45
2
1
Temperature
and Pressure
Relief Valve
13 / 20
T
0
Expansion
Vessel
JOULE PL
+48 (0) 128811171
0
0
High Flow Rate
Inlet Control Set
Dual Thermostat
F +48 (0) 814709046
1
Incoloy Long
240V 3kW
Immersion
Heater
0
15/22 Tundish
0
0
22mm
Thermostatic
Mixing Valve
E biuro@joule-pl.pl
Expansion
Vessel Hose
W www.joule-pl.pl
0
22 mm 2 Port
Motorzed
Diverting Valve
Heat Pump
specifically designed to work with heat pumps and other low
temperature heat sources
1” Adaptable Hot Water Draw
Plain Solar Sensor
Plain Solar Sensor
1/2” T&P Relief Valve (fitted)
1” Heat Pump Flow
3/4” Secondary Return
Plain Solar Sensor
1” Heat Pump Return
Plain Aquastat Pocket
Immersion Heater
3/4” Solar Flow
Plain Solar Sensor
3/4” Solar Return
1” Adaptable Cold Water Inlet
Heat Pump Cylinders
Joule Cyclone Heatpump cylinders have been
designed to work with air source, ground source
and other types of low temperature heat source
appliances. The cylinder is manufactured with coil
in coil technology. Coil in coil technology allows
for greater surface area coils to be installed in
standard sized cylinder units. The inner coil dissipates more heat at lower temperatures improving
the efficiency of the overall system. the cylinders
can be manufactured with any size coil required.
Please call Joule for details of coil sizes of units
on the shelf and feel free to ask Joule for a different specification cylinder if that is what you require.
Our in house engineers are on hand to offer advice
on cylinder specifications for different applications.
Technical Information
15 / 20
Heat Pump Cylinder with 1 coil
Volume (l)
200
250
300
400
500
PSM14053/HG
PSM17753/HG
PSM15660/HG
PSM15771/HG
PSM19071/HG
Height (mm)
1400
1775
1560
1570
1900
Diameter (mm)
530
530
600
710
710
Primary Coil Surface (m2)
2.5
2.8
3.2
3.2
4
Insulation (mm)
40
40
40
50
50
Weight Empty (kg)
65
72
80
97
109
Standard Standing Loss (kWh/Day)
1.8
2.15
2.28
2.41
2.54
Heat Pump Cylinder with 2 coils
PSM14053/HG+S
PSM17753/HG+S
PSM15660/HG+S
PSM15771/HG+S
PSM19071/HG+S
Height (mm)
1400
1775
1560
1570
1900
Diameter (mm)
530
530
600
710
710
Primary Coil Surface (m )
2.5
2.8
3.2
3.2
4
Solar Coil Surface (m2)
1.1
1.2
1.2
1.3
1.4
Insulation (mm)
40
40
40
50
50
2
Weight Empty (kg)
69
76
84
101
114
Standard Standing Loss (kWh/Day)
1.8
2.15
2.28
2.41
2.54
1
Temperature
and Pressure
Relief Valve
T
0
Expansion
Vessel
JOULE PL
+48 (0) 128811171
0
0
High Flow Rate
Inlet Control Set
Dual Thermostat
F +48 (0) 814709046
1
Incoloy Long
240V 3kW
Immersion
Heater
0
15/22 Tundish
0
0
22mm
Thermostatic
Mixing Valve
E biuro@joule-pl.pl
Expansion
Vessel Hose
W www.joule-pl.pl
0
22 mm 2 Port
Motorzed
Diverting Valve
Tank in Tank Eco
fast recovery tank-in-tank cylinder - perfect partner to
condensing boiler
Secondary Return
Cold Water Supply
Hor Water Supply
T/P Relief Valve
1” Connection
1” Connection
1” Connection
1” Connection
1” Connection
1” Connection
DHW Tank
3/4” Solar Flow
1” Connection
1” Connection
3/4” Solar Return
Tank in Tank Eco
The fastest recovery hot water cylinder available
• 20 min recovery of Domestic Hot Water
• Suitable for Heat Pumps because of large
Surface Area
• Suitable for Solar Thermal
• Suitable for pellet or log burners
• Design reduces boiler cycling & improves
boiler efficiency
• Most advanced Domestic Hot Water storage
cylinder available
• Tank design reduces limescale buildup
Technical Information
17 / 20
STANDARD
Volume (l)
150
200
250
300
400
500
Height (mm)
1085
1085
1335
1535
1535
1880
Diameter (mm)
500
560
560
560
660
660
Weight Empty (kg)
30
34
43
47
62
75
Weight Full (kg)
180
234
293
347
462
575
Reheat Indirect Total Minutes
21
26
26
32
35
35
Reheat 3 kW Immersion Total Min.
63
91
118
141
175
222
-
-
-
-
-
-
Standard Standing Loss kWh/Day
1.45
1.84
2.19
2.32
2.45
2.58
Eco80 Standing Loss kWh/Day
1.39
1.63
1.73
1.95
2.19
2.29
Litres in first 30 min 40 °C
320
321
418
558
686
922
Litres in first 30 min 45 °C
263
275
348
464
582
790
Litres in first 30 min 60 °C
175
161
206
274
358
504
Litres in first hour 40 °C
938
1063
1225
1633
1872
2666
Litres in first hour 45 °C
751
911
1003
1338
1559
2285
Dedicated Solar Volume
Litres in first hour 60 °C
426
536
590
786
935
1368
Continuous Flow (l/h)
827
890
967
1289
1423
2093
Continuous Flow (l/h)
673
763
786
1048
1172
1794
Continuous Flow (l/h)
378
450
461
614
693
1037
Absorbed Power (kW)
29
31
32
43
48
73
1
Temperature
and Pressure
Relief Valve
T
1
Expansion
Vessel
JOULE PL
+48 (0) 128811171
1
1
High Flow Rate
Inlet Control Set
Dual Thermostat
F +48 (0) 814709046
1
Incoloy Long
240V 3kW
Immersion
Heater
1
15/22 Tundish
0
1
22mm
Thermostatic
Mixing Valve
E biuro@joule-pl.pl
Expansion
Vessel Hose
W www.joule-pl.pl
1
22 mm 2 Port
Motorzed
Diverting Valve
Stainless Hot Water Calorifier
Large Stainless Steel Hot Water Calorifier
Joule manufactures stainless steel cylinders in all
capacities up to 3,000L. Choosing stainless steel
over mild steel for hot water storage is a sensible option as it removes the need for a sacrificial
anode and maintenance of that part. The quality of
the cylinders is ensured with factory testing to 12
bar. Stainless steel construction offers numerous
advantages over mild steel
•
•
•
•
•
•
•
•
•
•
Better corrosion resistance properties
Coil type heat exchangers
Removable U type heat exchangers
Option for inspection hatch
Soft foam jacket insulation option
Dense PU foam and wipe clean outer casing
option
Horizontal or vertical standing
Connections available for use with plate heat
exchangers
Stainless Steel grade used 316L
Option for cylinder to be manufactured to customers’ requirements
Technical Information
19 / 20
LARGE STAINLESS STEEL HOT WATER CLARIFIERS
Volume (l)
600
750
1000
1250
1500
2000
Height (mm)
2100
2100
2100
2100
2400
2700
2700
2700
Diameter (mm)
610
750
900
945
945
1100
1200
1270
Weight Empty (kg)
110
132
155
Weight Full (kg)
710
882
1155
2500
3000
Working Pressure (bar)
6-8
6-8
6-8
6-8
6-8
6-8
6-8
6-8
Tested Pressure (bar)
9-12
9-12
9-12
9-12
9-12
9-12
9-12
9-12
• Dense foam insulation and outer casing only available up to 945mm shell diameter. Bigger than this requires soft foam jacket (100mm)
• Dimensions indicated (height & diameter) are un-insulated shell dimensions and insulation thickness must be added to get overall dimensions
ELECTRICAL HEATING OPTIONS
Lenght (mm)
Phase
Thread Connection (“)
Material
6 kW
457
Single Phase
2.25” BSP
Incloy 825
9 kW
457
Single Phase
2.25” BSP
Incloy 825
90
12 kW
406
Three Phase
2.25” BSP
Incloy 825
73
18 kW
610
Three Phase
2.25” BSP
Incloy 825
71
INSPECTION HATCHES
Connection Type
Watt Density per (inch2)
INSULATION OPTIONS
Material
200mm Diameter
Flange
Stainless Steel
Soft Foam Jacket
300mm Diameter
Flange
Stainless Steel
Dense PU Foam
400mm Diameter
Flange
Stainless Steel
Thickness
Type
100 mm
Removable Jacket
50 mm
Not Removable
COILS & HEAT EXCHANGERS
Internal Coil
Diameter (mm)
Recovery Time (mins)
Working Pressure (bar)
Notes
22 / 28 / 32 / 38
30 / 40 / 60 / 90 / 120
6-8
Internal, not removable
25-50
30 / 40 / 60 / 90 / 120
6-8
Fully removable
U Type
• Primary connections can be selected from available options
• Other coil and u type heat exchanger specifications available on request
0
Temperature
and Pressure
Relief Valve
T
0
Expansion
Vessel
JOULE PL
+48 (0) 128811171
0
0
High Flow Rate
Inlet Control Set
Dual Thermostat
F +48 (0) 814709046
0
Incoloy Long
240V 3kW
Immersion
Heater
0
15/22 Tundish
0
0
22mm
Thermostatic
Mixing Valve
E biuro@joule-pl.pl
Expansion
Vessel Hose
W www.joule-pl.pl
0
22 mm 2 Port
Motorzed
Diverting Valve
Stainless Steel Buffer Storage
Stainless Steel Buffer Storage
Joule manufactures a large range of stainless buffer
tanks with different coil configurations. The largest capacity stainless steel buffer tank is 3,000L.
Buffer tanks can come complete with numerous
coil configurations from direct to quad coil and all
in-between. The coil types available are pumped
high temperature, heat pump, gravity and solar.
The advantages of choosing a Joule stainless steel
buffer storage tank are,
•
•
•
•
•
Light weight compared with mild steel
BSP direct connections
BSP coil connections
Standard immersions available on request.
Eco 80 specification available (80mm insulation)
Examples of Use
• With air and ground source heat pumps
• For helping solar to heat support both heating
and hot water system
• For use with bio mass and solid fuel heating
systems
• As a heat store for electrically generated energy
Technical Information
21 / 20
LARGE STAINLESS STEEL BUFFER STORAGE TANKS
Volume (l)
125
150
170
200
250
300
400
500
600
Height (mm)
925
1085
1205
1085
1335
1335
1535
1880
2280
Diameter (mm)
550
550
550
600
600
600
710
710
710
Weight Empty (kg)
26
30
32
34
43
47
62
75
90
Weight Full (kg)
151
180
202
234
293
347
462
575
690
No. Direct Connections
7
7
7
9
9
9
9
9
9
Diameter of Direct Connections
1”
1”
1”
1”
1”
1”
1”
1”
1”
Drain Off
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
Standard Standing Loss (kWh/Day)
1.23
1.41
1.53
1.8
2.15
2.28
2.41
2.54
2.71
Eco80 Standing Loss (kWh/Day)
1.16
1.36
1.44
1.69
1.91
2.15
2.25
2.38
2.59
ELECTRICAL HEATING OPTIONS
Lenght (mm)
Phase
Thread Connection (“)
Material
6 kW
457
Single Phase
2.25” BSP
Incloy 825
9 kW
457
Single Phase
2.25” BSP
Incloy 825
90
12 kW
406
Three Phase
2.25” BSP
Incloy 825
73
18 kW
610
Three Phase
2.25” BSP
Incloy 825
71
0
Temperature
and Pressure
Relief Valve
T
0
Expansion
Vessel
JOULE PL
+48 (0) 128811171
0
0
High Flow Rate
Inlet Control Set
Dual Thermostat
F +48 (0) 814709046
0
Incoloy Long
240V 3kW
Immersion
Heater
0
15/22 Tundish
0
0
22mm
Thermostatic
Mixing Valve
E biuro@joule-pl.pl
Watt Density per (inch2)
Expansion
Vessel Hose
W www.joule-pl.pl
0
22 mm 2 Port
Motorzed
Diverting Valve
Mild Steel Hot Water Calorifier
Large Mild Steel Buffer Storage
These hot water tanks must be installed in a frostprotected room by a locally authorised specialist
company.
The vacuum enamelled tanks are suitable for
normal drinking water. An appropriate electrical
separation in accordance with the standards of
engineering must be provided for mixed installations. Any unused coupling sleeves must be
suitably sealed.
Please observe the regulations of the local works
and the relevant standards when connecting. The
connections must be installed pressure-proof.
The component-tested safety devices must be
installed in the cold water supply line according to
local regulations, as can be seen in the illustration.
The component-tested safety valve must have a
connecting diameter of DN 15 (up to 200 l, max.
heating capacity 75kW) or DN 20 (over 200 l, max.
heating capacity 150 kW) and must not be closable
from the hot water tank. An indicating label with the
following inscription must be affixed to the safety
valve or its blow-off line:
For safety reasons, water may exit from the
blow-off line during heating! Do not close!
The operating overpressure specified on the rating plate must not be exceeded; install pressure
reducer, if necessary. A discharging device must
be provided in the cold water when installing the
connection.
Technical Information
Dimension
Type
1500
2000
2500
3000
FFM / FRM / FRMR
FFM / FRM / FRMR
FFM / FRM / FRMR
FFM / FRM / FRMR
Ø of tank with ISO 100 mm
1200
1300
1400
1400
Height with ISO 100 mm
2230
2420
2480
2870
Ø of tank without ISO 100 mm
1000
1100
1200
1200
HW/ventilation
A
5/4” FT
2122
2313
2373
2768
Hot water
B
5/4” FT
1825
1997
2027
2422
Circulation
C
1” FT
1217
1252
1282
1682
Heating inflow, bottom
D
5/4” FT
1067
1088
1122
1262
Heating return flow, bottom
E
5/4” FT
362
448
482
482
Heating inflow, top
O
5/4” FT
1722
1713
1927
2272
Heating return flow, bottom
P
5/4” FT
1342
1393
1597
1942
CW / Discharge
F
5/4” FT
80
168
80
100
Sensor
G
1/2” FT
1825
1997
2027
2422
Correx anode
H
3/4” FT
1494
1612
1642
1992
Electric heating element
I
2” FT
1354
1472
1502
1852
Sensor
K
1/2” FT
1167
1202
1232
1482
Flange
L
D = 240
837
847
877
877
Flange
L
D = 240
437
447
477
477
Heat exchanger
M
HE m2/l
3.5 / 29
4.0 / 36
4.0 / 40
5.0 / 47
Heat exchanger
N
HE m2/l
1.75 / 15
2.0 / 16
2.0 / 18
2.5 / 25
Weight (kg)
360 / 425 / 460
420 / 493 / 532
495 / 570 / 610
620 / 713 / 762
Tilted weight
2250
2440
2520
2890
Operating pressure (bar)
10
10
10
10
Operating temperature (°C)
95
95
95
95
0
Temperature
and Pressure
Relief Valve
23 / 20
T
0
Expansion
Vessel
JOULE PL
+48 (0) 128811171
0
0
High Flow Rate
Inlet Control Set
Dual Thermostat
F +48 (0) 814709046
0
Incoloy Long
240V 3kW
Immersion
Heater
0
15/22 Tundish
0
0
22mm
Thermostatic
Mixing Valve
E biuro@joule-pl.pl
Expansion
Vessel Hose
W www.joule-pl.pl
0
22 mm 2 Port
Motorzed
Diverting Valve
Mild Steel Buffer Storage
new
Eco Sk
in
36%
Energy
instead
Saving
if 21%
New Decisive Advantages
• Everything from one source –
Buffer tank and insulation are
manufactured by Joule
• Perfect corrosion protection –
buffer tank with stoveenamelled
powder coating externally
• Stable, form-retaining polystyrene cover
• Perfect fit, therefore no chimney
losses
• Insulated connection caps for
the connections
• With ECO SKIN 2.0 save up to
3050,- on energy costs, over
the life of a 1000 l - storage tank
Large Mild Steel Buffer Storage
Joule mild steel buffer tanks are suitable for all
hot water central heating systems, regardless of
whether they are powered by solid-fuel or oil-fired
boilers, heat pumps, solar energy systems or continuous flow heaters (gas or electric). Several buffer
tanks can also be combined in a row (see technical
data and accessories), meaning the tank volume
can be adjusted individually depending on the
requirements. Furthermore, the buffer tanks can
also be used for cold water storage in cooling processes (up to 3 bar operating / system pressure) or
heat recovery in industrial facilities.
• Nominal capacity of PSF/PSM/PSR/PSRR =
500 to 5000 litres
• Made from quality St 37-2 steel
• 100 mm ECO SKIN fleece insulation (up to 5,000 l)
• Large-surface pipe array on PSR/PSRR models
• 240 mm flange on PSF models for installing a
finned tube heta exchanger or built-in heater
• Operating pressure = 3 bar, test pressure 4.5 bar
in buffer tank
• Operating pressure max. 10 bar, test pressure 15
bar in pipe array on PSR/PSRR models
• 4 regulating sleeve threads. „Female thread on
PSF/PSM and PSR/PSRR models
• 2 x sensor channels for variable positioning of
sensor models
• Operating temperature = 95°C (110°C in pipe array)
• External powder coating (colour deviations) up
to 2000 litres
• External anti-rust coating (from 3,000 l upwards)
Technical Information
Type
Diagonal
Height
(mm)
200
1105
670
300
1370
670
25 / 20
Dimensions (mm)
A
B
C
D
F
G
H
Pipe array heating surface (mm)
I
J
K
L
M
Lower
Upper
Array content (l)
Lower
Upper
500
1670
220
620 1010 1390 1640 650
340
495 1725 220 1040 350
1.8
1.2
11
7.5
800
1750
260
630 1030 1430 1700 790
390
585 1785 260 1070 360
2.4
1.8
15
11
825
1900
260
685 1140 1595 1857 790
−
−
−
−
−
15
1000
2090
310
745 1250 1710 2050 790
390
1250
2100
330
705 1105 1480 1802 1000
−
1500
2270
380
825 1350 1760 2150 1000 415
−
1940
−
−
−
720 2135 310 1160 540
−
1905
−
−
−
800 2235 375 1260 500
3
2.4
19
−
−
−
−
3.6
2.4
22
15
2000
2460
320
900 1490 2020 2380 1100 423
800 2465 320 1420 540
4.2
2.8
26
18
3000
2650
375
985 1600 2205 2596 1250 460
720 2681 375 1665 540
4.5
3.0
29
19
4000
2740
405 1022 1639 2255 2669 1400 490
720 2754 405 1715 540
5.0
3.6
32
22
5000
2893
455 1065 1680 2285 2770 1600 540
720 2855 405 1745 540
6.0
4.2
39
26
Standby Energy Comsumption (kWh/24h)
Type
200
300
500
800
825
1000
1250
1500
2000
3000
4000
5000
PSF
2.9
3.1
3.3
4.1
4.2
4.3
5.1
5.4
6.3
7.7
8.7
10.0
PSM
2.7
2.9
3.0
3.7
3.8
3.9
4.7
5.0
5.9
7.3
8.3
9.6
PSR
2.8
2.9
3.1
3.9
4.0
4.1
4.9
5.2
6.1
7.5
8.5
9.8
PSRR
2.9
3.1
3.3
4.0
4.1
4.2
5.0
5.3
6.2
7.6
8.6
9.9
Standby Energy Consumption in kWh/24h according to EN 12897
PSF
PSM Buffer Tank with
D240 Flange
0
Temperature
and Pressure
Relief Valve
T
0
Expansion
Vessel
JOULE PL
+48 (0) 128811171
PSM
Buffer Tank with
6/4” Cooling Sleeves
0
0
High Flow Rate
Inlet Control Set
Dual Thermostat
F +48 (0) 814709046
0
Incoloy Long
240V 3kW
Immersion
Heater
PSR / PSRR
Buffer Tank
(PSM with Pipe Array)
0
15/22 Tundish
0
0
22mm
Thermostatic
Mixing Valve
E biuro@joule-pl.pl
Expansion
Vessel Hose
W www.joule-pl.pl
0
22 mm 2 Port
Motorzed
Diverting Valve
Notes
27 / 20
T
JOULE PL
+48 (0) 128811171
F +48 (0) 814709046
E biuro@joule-pl.pl
W www.joule-pl.pl
Unvented stainless cylinders
JOULE PL
JOULE UK
mail
tel
fax
eml
web
23-200 Kraśnik, ul. Towarowa 34.
+48 (0) 128811171
+48 (0) 814709046
biuro@joule-pl.pl
www.joule-pl.pl
mail
Unit 17C&D Power Road, Plantation Bus. Pk. mail
Bromborough, Wirral, CH62 3RN
tel
+44 (0) 1513 551 094
fax
+44 (0) 1513 568 336
eml
info@jouleuk.co.uk
web
www.jouleuk.co.uk
tel
fax
eml
web
JOULE IE
Kylemore Park West, Ballyfermot, Dublin 10
+353 (1) 623 7080
+353 (1) 626 9337
info@joule.ie
www.joule.ie
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising