Cisco RV0xx Series Multi-WAN Network Security Firewall

Cisco RV0xx Series Multi-WAN Network Security Firewall
Welcome
Thank you for choosing a Cisco RV0xx Series VPN Router. These routers
provide advanced connection-sharing for your small business, and allow your
remote workers to securely access your onsite network resources.
DMZ (RV016): The LED is steady orange when the router is connected to a
DMZ host through the DMZ port. It flashes to indicate network activity over the
port.
1
All RV0xx Series routers can support a second Internet connection to ensure
continuous connectivity or to increase available bandwidth and balance traffic.
Three models are available. A comparison is provided below.
DIAG
Internet
System
DMZ
Internet
DMZ
Mode
1
2
3
4
5
6
7
8
2
3
4
Cisco Small Business
RV082
DMZ/Internet
5
6
7
Internet
10/100
16-Port VPN Router
8
278824
Quick Start Guide
RV082 Ports and LEDs
RV016 Ports and LEDs
RV042
RV082
RV016
LAN
Ports
WAN /DMZ
Ports
4
8
8-13
2
2
2-7 Internet
1 DMZ
LAN/Act
DIAG
Cisco RV0xx Series VPN Router
Model RV042, RV082, and RV016
RV0xx Series Router Features
4
5
9
10
11
12
13
7
6
5
4
3
6
7
1
2
3
4
5
97
106
115
124
133
6
7
8
Cisco Small Business
RV016
8
Internet Internet
2
1
DMZ
Internet 2 Internet 1
DMZ
10/100
16-Port VPN
Ports
Internet (RV042 and RV082) or Internet 1-2 (RV016): Use this port to
connect the router to a broadband network device.
DMZ/Internet (RV042 and RV082): Use this port to connect the router to
either a second broadband network device or a DMZ host such as a web
server or FTP server. A DMZ allows public Internet traffic to access a specified
computer on your network without exposing your LAN.
1-4 (RV042) or 1-8 (RV082 and RV016): Use these numbered ports to
connect computers and other local network devices.
1
2
3
4
Internet
DMZ/Internet
• 10/100 x- Port VPN Router
278823
• Power Adapter for RV042 or AC Power Cable for RV082/RV016
• RJ45 Ethernet Cable
• Quick Start Guide
3
DMZ (RV016): Use this port to connect the router to a DMZ host such as a
web server or FTP server. A DMZ allows public Internet traffic to access a
specified computer on your network without exposing your LAN.
RV042 Ports
Package Contents
• Rack Mounting Kit for RV016/ RV082
Dual-Function Ports
Internet/Act
Internet port. RV016 has two dedicated Internet ports, one dedicated DMZ
port, and five dual function ports that can be configured as LAN or Internet
ports.
Cisco Small Business
2
LAN/Act
System
NOTE RV042 and RV082 have one dedicated Internet port and a DMZ/
1
1
278826
Model
RV042 LEDs
• Product CD
DIAG
Internet
DMZ/ DMZMode
Internet
1
2
3
4
Cisco Small Business RV042
278822
System
Dual Function Ports (RV016): Use these ports as LAN ports (numbered 9-13)
or configure them for use as Internet ports (numbered 3-7). The status is shown
on the corresponding LEDs: LAN/Act 9-13 or Internet/Act 3-7.
1-4 (RV042), 1-8 (RV082), or LAN/Act 1-8 (RV016): The LED is steady green
when a device is connected to the corresponding port. It flashes to indicate
network activity over the port.
Dual Function Ports LAN/Act 9-13 and Internet/Act 3-7 (RV016): For each
dual function port, only one LED is lit, indicating the current port function (LAN
or Internet). The LED is steady green when a device is connected to the
corresponding port. It flashes to indicate network activity over the port.
• Ambient Temperature—To prevent the router from overheating, do not
operate it in an area that exceeds an ambient temperature of 104°F (40°C).
• Air Flow—Be sure that there is adequate air flow around the router.
• Mechanical Loading—Be sure that the router is level and stable to avoid
any hazardous conditions.
Reset: The reset button is an indented black button on the back panel of the
RV042 and on the front panel of the RV082 and RV016.
Before placing the router on a desktop, install the four adhesive pads onto the
the bottom panel. Place the router on a flat surface near an electrical outlet.
• To restart the router or restore connectivity: If the router is having
problems connecting to the Internet, use the tip of a pen to press and hold
the Reset button for one second.
• To restore factory default settings: If you are experiencing extreme
problems with the router and have tried all other troubleshooting measures,
press and hold the Reset button for 30 seconds to restore the factory
default settings. All previously entered settings will be abandoned.
Security Slot: Use the security slot on the side panel to attach a lock to
protect the router from theft.
Power:
• RV042: Connect the provided power adapter to the power port on the side
panel.
WARNING Do not place anything on top of the router; excessive weight could
damage it.
Wall Mounting
The router has two wall-mount slots on the bottom panel. To mount the router
on a wall, you need mounting hardware (not included). Suggested hardware is
illustrated below (not true to scale).
Suggested Hardware for
RV042
Suggested Hardware for
RV082 and RV016
• RV082 and RV016: Connect the provided AC power cable to the power
port on the back panel.
Default Settings
Username
admin
DIAG: The LED is steady red when the router is preparing for use. It is unlit
when the router is ready for use.
Password
admin
System: The LED is steady green when the router is powered on. It flashes
when the router is running a diagnostic test.
LAN IP
192.168.1.1
DHCP Range
192.168.1.100 to 149
Netmask
255.255.255.0
DMZ Mode (RV042 and RV082): The LED is steady green when the DMZ/
Internet port is configured as a DMZ. This LED is unlit when the port is
configured as a secondary Internet connection.
Placement Tips
Desktop Placement
Default Value
Internet (all models), DMZ/Internet (RV042 and RV082), or Internet/ACT
(RV016): The LED is steady green when a device is connected to the
corresponding port. It flashes to indicate network activity over the port.
Mounting Options
Other Hardware Features
Parameter
LEDs
2
5-5.5 mm
20-22 mm
6.5-7 mm
16.5-18.5 mm
WARNING Insecure mounting might damage the router or cause injury. Cisco
is not responsible for damages incurred by insecure wall-mounting.
Rack Mounting RV082 or RV016
You can mount the RV082 or RV016 in a standard size, 19-inch (about 48 cm)
wide rack. The router requires 1 rack unit (RU) of space, which is 1.75 inches
(44.45mm) high. Mounting brackets are provided.
4
1
DIAG
Internet
System
DMZ
Internet
DMZ
Mode
1
2
3
4
5
6
7
8
2
3
4
DMZ/Internet
5
6
7
Internet
10/100
16-Port VPN Router
8
CAUTION Do not overload the power outlet or circuit when installing
•
STEP 1 Place the router on a hard, flat surface.
RV016: Connect an Ethernet cable from the broadband network
device to the Internet 1 port of the router.
STEP 2 Attach one of the supplied rack–mount brackets to one side of the
RV016 Internet 1 Port
STEP 3 Follow the same steps to attach the other bracket to the opposite side.
STEP 4 Use suitable screws to securely attach the brackets to any standard
LAN/Act
DIAG
System
3
4
5
10
11
12
13
7
6
5
4
3
6
7
3
4
5
6
7
8
Internet Internet
2
1
STEP 5 Click Login. The System Summary page appears.
DMZ
106
115
124
133
Internet 2 Internet 1
DMZ
10/100
16-Port VPN
2
STEP 3 To connect a secondary Internet service:
STEP 3 Place the router wall-mount slots over the screws and slide the router
down until the screws fit snugly into the wall-mount slots.
1
•
RV042 and RV082: Connect an Ethernet cable from the DMZ/
Internet port to a second broadband network device.
•
RV016: Connect an Ethernet cable from the Internet 2 port to a
second broadband network device.
DIAG
System
Internet
DMZ
Internet
DMZ
Mode
1
5
1
2
6
3
7
2
4
3
8
4
DMZ/I
5
6
7
8
nterne
t
Cisco
Intern
et
Small
Busin
ess
RV082
16-Por
t VPN 10/100
Route
r
DIAG
Interne
DMZ
Interne
t
t
DMZ
Mode
1
5
1
2
6
3
7
2
4
3
8
4
DMZ
/Inte
5
6
rnet
Cisco
Inter
7
net
Smal
Americas Headquarters
16-Po
3
l Busin
ess
RV08
2
8
278825
System
rt VPN 10/100
Rout
er
Connecting the Equipment
STEP 4 To connect a computer or server that will be a DMZ host:
•
RV042 and RV082: Connect an Ethernet cable from the DMZ/
Internet port to the DMZ host.
•
RV016: Connect an Ethernet cable from the DMZ port to the DMZ
host.
STEP 5 To connect other network devices, such as computers, print servers, or
STEP 1 Make sure that all network devices are powered off, including the router,
PCs, Ethernet switches, and broadband network device (DSL or cable
modem).
STEP 2 To connect to your Internet service:
•
RV042 Internet Port
3
4
Internet
DMZ/Internet
199619
2
STEP 6 Power on the broadband network device(s).
STEP 7 Use the power adapter (RV042) or power cable (RV082 and RV016) to
STEP 8 Power on the other network devices.
The router’s default settings are sufficient for many small businesses.
Your Internet Service Provider may require additional settings. On the
System Summary page, check the WAN Status to see if the router was
able to receive an IP Address. If not, continue to the next step.
5
Where to Go From Here
Support
Cisco Small Business
Support Community
www.cisco.com/go/smallbizsupport
Cisco Small Business
Support and Resources
www.cisco.com/go/smallbizhelp
Phone Support Contacts
www.cisco.com/en/US/support/tsd_cisco_
small_ business _support_center_contacts.html
Cisco Small Business
Firmware Downloads
www.cisco.com/go/smallbizfirmware
STEP 6 To use the setup wizard to configure your Internet connection, click
Setup Wizard on the System Summary page, or click Wizard in the
navigation tree. In the Basic Setup section, click Launch Now. Follow
the on-screen instructions.
If your web browser displays a warning message about the pop-up
window, allow the blocked content.
Cisco strongly recommends setting a strong administrator password
to prevent unauthorized access to your router. For more information
about all settings, refer to the online Help and the Cisco Small
Business RV0xx Series VPN Router Administration Guide.
Troubleshooting Tips
If you have trouble connecting to the Internet or the web-based configuration
utility:
• Verify that your web browser is not set to Work Offline.
• Check the Local Area Connection settings for your Ethernet adapter. The PC
needs to obtain an IP address through DHCP. Alternatively, it can have a
static IP address in the 192.168.1.x range with the default gateway set to
192.168.1.1 (the router’s default IP address).
• Try resetting the modem and the router by powering off both devices. Next,
power on the modem and let it sit idle for about 2 minutes. Then power on
the router. You should now receive a WAN IP address.
Select a link to download firmware for Cisco
Small Business Products. No login is required.
Downloads for all other Cisco Small Business
products, including Network Storage Systems,
are available in the Download area on Cisco.com
at www.cisco.com/go/software (registration/
login required).
STEP 7 To configure other settings, use the links in the navigation tree.
• Verify that you entered the correct settings in the Wizard to set up your
Internet connection, including the username and password if required.
© 2010 Cisco Systems, Inc. All rights reserved.
1
Ethernet switches, connect an Ethernet cable from a numbered LAN
port to the network device.
connect the router to a power outlet. The System LED lights up.
RV042 or RV082: Connect an Ethernet cable from the broadband
network device to the Internet port of the router.
STEP 3 In the address bar, enter the default IP address of the router:
the default password admin (lowercase).
Cisco Small Business
RV016
8
97
the base of the screw head of 1 to 1.2 mm.
78-19481-01
Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and
other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks.
Third party trademarks mentioned are the property of their respective owners. The use of the word
partner does not imply a partnership relationship between Cisco and any other company. (1005R)
Dual-Function Ports
Internet/Act
STEP 2 Insert a screw into each hole, leaving a gap between the surface and
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Small Business Support, US: 1-866-606-1866 (Toll Free, 24/7)
Small Business Support, Global: www.cisco.com/go/sbsc
2
9
2
LAN/Act
19-inch rack.
RV082 and RV016: 94 mm apart
1
with Internet Explorer (version 6 and higher), Firefox, or Safari (for Mac).
STEP 4 When the login page appears, enter the default user name admin and
1
199621
•
RV042: 58 mm apart
become a DHCP client of the router and will receive an IP address in the
192.168.1.x range.
• Check the DHCP IP address range of your modem. If the modem uses the
192.168.1.x range, disconnect the cable from the modem to the router, and
then launch the router configuration utility. In the navigation tree, choose
Setup > Network. Enter a new Device IP Address, such as 10.1.1.1 or
192.168.0.1. Alternatively, if you have a DSL modem, leave all settings as is
and instead ask your ISP to put the DSL modem into bridge mode.
192.168.1.1
router with the supplied screws. Secure the bracket tightly.
•
STEP 1 Connect a computer to a numbered LAN port on the router. Your PC will
STEP 2 Start a web browser. To use the configuration utility, you need a PC
multiple devices in a rack.
STEP 1 Drill two pilot holes into the surface.
Getting Started with the Configuration
Cisco Small Business
RV082
199620
WARNING For safety, ensure that the heat dissipation holes are facing sideways.
RV082 Internet Port
Product Documentation
Cisco Small Business
Routers
www.cisco.com/go/smallbizrouters
Cisco Small Business
Cisco Partner Central for
Small Business (Partner
Login Required)
www.cisco.com/web/partners/sell/smb
Cisco Small Business
Home
www.cisco.com/smb
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising