LORUS
 LORUS
INSTRUCTIONS
L-HL029-1
IMAGE
SNOOZE / LIGHT RESET
ROTATION
—
—
9696 00 e000 0
PROJECTOR
FOCUS
Specifications
- Calendar with day-of-the-week display.
- Hour, Minute and Second display.
12 or 24 hour format.
Operating temperature from 0°C to 50°C (32°F to 122°F).
Temperature measuring range from -9.9°C to 50°C (14.2°F to 122°F).
Temperature resolution 0.1°C (0.1°F).
Alarm with snooze function.
+ Backlight and projection display.
-
Battery Installation
- Open the battery door.
- Load full set (2 pcs AA size battery) of new batteries in polarity (+) and
(-) as indicated.
- Close the battery door.
Warning : Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable
(nickel cadmium) batteries.
SET THE CLOCK
To Set the Language
1. Press and hold the SET button for couple of seconds will go to language
set mode.
2. Press — key to toggle different language.
To Set the Calendar
1. Press SET button after language set mode.
2. Press + or — button sequentially to set year,
3. Holding down either + or — button to change the year at high speed.
4. Press SET button to confirm year set and go to date set.
5. Press + or — button sequentially to set date.
6. Holding down either + or — button to change the date at high speed.
To Set the Time
1. Press SET button after calendar set mode.
2. Press + or — button sequentially to set minutes, when you press the + or
— button once, the seconds count reset to 00.
3. Holding down either + or — button to change the time at high speed.
To Set the Format
1. Press SET button after desired time set and go to format set mode.
2. Press + button to toggle between 12hr and 24 hr time display format.
3. Press — button to toggle between °C and °F temperature display format.
4. Press SET button to confirm and quit the set mode.
Using Alarm
To Set Alarm Time
1. Press + or — button sequentially to set the alarm time, the alarm time will
be shown at time display with AL icon turned on.
2. Holding down either + or — button to change the alarm time at high
speed. :
To Active Alarm Function
1. Press ALARM key once, the sign # will appear on the time display. The
alarm function is activated.
2. To deactivate the alarm function, press ALARM key until the
disappear.
(Cm)
To Active the Snooze Alarm
1. Press ALARM key twice, the sign § and Zz will appear on the time
display. The snooze function is activated.
2. When the alarm sounds, press the SNOOZE button. The alarm will
sound again in approximately 5 minutes.
3. To deactivate the snooze alarm, press ALARM key until the s and 77
disappear.
To Use the Backlight and Projector
- You may check the time in the dark by simply pressing the
“SNOOZE/LIGHT” button once. The display will light up with a soft glow
that lasts for a while. You can read the time easily and clearly.
* Adjust by turning forwards or backwards the projector, so that the
projection lens is pointed in the appropriate direction.
Focus image - rotate "PROJECTOR FOCUS" forward or backward until
the image clarity is optimized.
Rotate Image - rotate "IMAGE ROTATION" to turn the projected image
clockwise or anticlockwise to suit your viewing.
Note : Frequent use of this feature will affect battery life.
To Reset the Unit
If the unit does not work properly, reset it by pressing the RESET button.
Care of Your Clock
* Avoid exposing your clock to extreme temperatures, water or severe
shock.
* Avoid contact with any corrosive materials such as perfume, alcohol or
cleaning agents.
* Do not subject the clock to excessive force, shock, dust, temperature or
humidity. Any of these conditions may shorten the life of the clock.
* Do not tamper with any of the internal components of this clock. This will
invalidate the warranty and may cause damage.
Disposal of Your Old Product
Your product is designed and manufactured with high quality
materials and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a
product it means the product is covered by the European Directive
2002/96/EC.
Please inform yourself about the local separate collection system for
electrical and electronic products.
Please act according to your local rules and do not dispose of your old
products with your normal household waste. The correct disposal of your
old product will help prevent potential negative consequences for the
environment and human health.
Disposal of Flat Batteries / Accumulators
You, as the end user, are legally obliged (Battery Ordinance) to
return all flat batteries and rechargeable batteries. Disposal in the
household waste is prohibited.
“European Directive 2006/66/EC” Batteries, including rechargeable
batteries, which contain hazardous substances are marked by
symbols which indicate the prohibition of disposal in the household
waste. The designations for the heavy metals concerned are as
follows : Cd = cadmium, Hg = mercury, Pd = lead. You can return
flat batteries / rechargeable batteries free of charge to the collection
points in your community or anywhere else where batteries /
rechargeable batteries are sold.
You thus fulfil your statutory obligations and help protect the
environment.
Caution
Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type, please refer to the engraved battery marks inside
the battery compartment for the correct battery polarity (+) and (-).
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising