eni broadband power amplifier
503 L
ENI BROADBAND POWER AMPLIFIE
DESCRIPTION
The ENI Model 2100L is a broadband solid state power
amplifier covering the frequency range of 10 kHz to
1 2 MHz w i t h a class A linear power output of more t h a n
100 watts.
®
H
-
SPECIFICATIONS
10 kHz to 12 MHz
Gain:
50 db
Gain Variation:
±1.5 dB
Maximum Class A Linear
Power Output:
100 watts
Harmonic
Distortion:
All odd harmonics more than
25 dB down at 100 watts, all
even harmonics more than
35dB down at 100 watts. All
harmonics are lower at reduced power output.
Typical 3rd Order
Intermodulation
Intercept Point:
+62 dBM
Max. CW and Pulse
Power Output:
Greater than 150 watts
10 kHz to 12 MHz
Greater than 200 watts
30 kHz to 4 MHz
•
f
CAUTO
IN
VOLTAOt
Q
All Solid State
Flat 10 kHz to 12 MHz
100 Watts Linear Output
More than 150 Watts CW & Pulse
50 dB Gain
Failsafe
Works Into Any Load
Output RF voltage level as well as power into 50 ohms
is monitored by a front panel meter. A n integral power
supply permits operation directly from the AC line.
Frequency Coverage:
Immmmm
*
Primarily designed to be used as a driver for ultrasonic,
RFI/EMI, medical research, laser modulation, and laboratory applications, this extremely rugged unit w i l l
provide more than 2 0 0 watts over much of its useful
frequency range w i t h o u t regard to load impedance
match. The 2100 is drive compatible w i t h all laboratory
signal generators, synthesizers and function generators and w i l l accurately reproduce all waveforms w i t h i n
its output and bandwidth capability.
o
Mooti noot w rowiR <Mnvm
Stability:
Unconditionally stable; unit
will notoscillateforanycondition of load and source
impedance.
Protection:
Unit w i l l withstand more
than 16 dB overdrive (input
signal of 1V RMS) for all
output load conditions.
Output Metering:
Average reading volmeter
calibrated in RMS volts for
a sine wave, with an accuracy of ± 3% of full scale
(0-100 volts); also calibrated
in watts into 50 ohms (0200 watts)
Power Requirements:
115 VAC ± 7% at 9.5 amperes or 230 VAC ± 7% at 5
amperes
Operating Temperature:
0° to +45° C
Size:
8Va X 15 X 195/B in.
22.2 x 38.1 x 49.9 cm.
Weight:
63.5 lbs; 28.8 kg.
Input/Output Impedance:
50 ohms
Input VSWR:
1.8 Maximum
Output VSWR:
2.5 Maximum
Connectors:
BNC
Noise Figure:
9 dB Typical
Rack Mounting:
Adaptors provided
Primed m USA
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising