DD-WRT Wireless-N Broadband Router Setup Instructions Step 1

DD-WRT Wireless-N Broadband Router Setup Instructions Step 1
DD-WRT Wireless-N Broadband Router Setup Instructions
Step 1: Connect the Antenna
Step 2: Connect the power
Step 3: Connect the ethernet cable to the blue WAN port
Step 4: Now on your ADSL or cable modem connect the other end of the Ethernet cable
Notes: if you have a cable modem make sure the cable line is connected to the cable modem
if you have an ADSL modem make sure your telephone line is connected to the modem
Step 5: make sure that you have connected your router and modem's power (both ends)
Step 6: if your desktop or laptop computer does not have a wireless card install it now
Step 7: turn on your computer and select the dd-wrt wireless access point from your distribution's network applet
Step 8: to enable security on your router and
access other configuration information open
your web browser and enter the following into
the address bar: 192.168.1.1
Step 9: to setup wireless security click on the wireless tab
Step 10: when prompted for a user name/password enter admin (this is the user name and password)
Step 11: Select the wireless security tab
Step 12: select your preferred settings and enter a password, save, and apply
Step 13: repeat step 6 except this time with the password you have just setup
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising