Texaco product guide
Texaco product guide
Europe & Eurasia, 2010
A Chevron company brand
CONTENT
Passenger Car Engine Oils
- Fully-synthetic Engine Oils
- Synthetic Engine Oils
- Part-synthetic Engine Oils
- Mineral Engine Oils
3
3
4
7
7
Heavy Duty Diesel Engine Oils
- Synthetic Engine Oils
- Semi-synthetic Engine Oils
- Part-synthetic Engine Oils
- Non-conventional Engine Oils
- Mineral Engine Oils
- Railroad Diesel Engine Oils
8
8
9
10
11
12
13
Small Engine Lubricants
- 2-Cycle Land Applications
- 2-Cycle Outboard Engine Oils
- 4-Cycle Mobile Engine Oils
14
14
15
16
Manual Transmission Fluids
17
Automatic Transmission Fluids
23
Power Steering Fluids
26
Brake Fluids
28
Coolants/Antifreeze & Corrosion Inhibitor
- Coolants/Antifreeze
- Corrosion Inhibitor
29
29
30
Havoline® Performance Plus Products
- Fuel System Treatments
- Crank Case Treatment
31
31
32
Universal Oils for Off-Road Machinery
- Super Universal Tractor Oils
- Transmission/Hydraulic Oils
- Hydraulic/Differential Oils
33
33
34
35
Gas Engine Oils
36
Marine Lubricants
- Marine Engine Oils
- Marine Gear Oils
39
39
44
Chain & Chain Saw Lubricants
- Biodegradable Chain Saw Lubricants
- Chain Lubricants
45
45
45
CONTENT
Hydraulic Fluids
- Industrial Hydraulic fluids
- Biodegradable Hydraulic Fluids
- Fire-resistant Hydraulic Fluids
46
46
48
48
Insulating Oils
- Transformer Oils
- Electrical Discharge Machining fluids
66
66
67
68
68
69
Pneumatic Tool Lubricants
50
Process Oils
- Paraffinic and Naphtenic Oils
- White Oils
Industrial Gear Oils
- Mineral Gear Oils
- Synthetic Gear Oils
51
51
53
Heat Transfer Fluids
70
Rust Preventive Oils
72
Greases
- Lithium (Li) based greases
- Calcium (Ca) based greases
- Sodium (Na) based greases
- Open Gear lubricants
- Polyurea greases
74
74
78
80
81
83
INDEX
84
Circulating Oils
55
Way Lubricants
57
Turbine Oils
58
Air & Gas Compressor Oils
- Air Compressor Oils
- Gas Compressor Oils
60
60
62
Refrigeration Compressor Oils
63
PASSENGER CAR ENGINE OILS
Product name
Density Flash point Pour
Kinematic
o
2
point,
at 15 C (COC),
viscosity, mm /s
o
o
o
kg/l
min, C max, C at 40 C at 100oC
Performance Claims /
Approvals /
Recommendations
Description
Fully-synthetic Engine Oils
HAVOLINE® SYNTHETIC
506.01
SAE 0W-30
HAVOLINE® SYNTHETIC
SAE 5W-40
ACEA A5/B5
0.856
218
-45
53.0
9.4
Approvals:
VW 506.01/503.00/506.00
(LongLife Service QG-1)
ACEA A3/B3
API SL/CF
0.857
232
-33
88.0
14.6
Approvals:
MercedesBenz 229.1
3
Fully-synthetic engine oil for petrol and diesel
passenger car and van engines, turbo-charged
or naturally aspirated. Helps protection from
sludge formation, enables easy start-up under
cold climate conditions, improves protection
against deteriorating engine performance and
engine failure. It is recommended for high
output engines, especially for VW/Audi vehicles
requiring VW 506.01 approved product.
Fully-synthetic lubricant that gives protection
for cars whose drivers demand high engine
performance day after day. Well suited for
modern passenger cars, petrol or diesel fueled,
including fast hatchbacks, luxury saloons or
high performance sports cars. It helps protect
engine during start-up, improves savings on
fuel costs, reduces maintenance and repair
costs.
PASSENGER CAR ENGINE OILS
Product name
Kinematic
Density Flash point Pour
o
2
point,
viscosity, mm /s
at 15 C (COC),
o
o
o
kg/l
min, C max, C at 40 C at 100oC
Performance Claims /
Approvals /
Recommendations
Description
Synthetic Engine Oils
ACEA A3/B4
API SL/CF
HAVOLINE® ULTRA
SAE 5W-40
0.857
232
-33
88.0
Approvals:
VW 502.00/505.00
MercedesBenz 229.3
Porsche
Opel/GM-LL-B-025
14.6
ACEA A3/B4 (incl. A3/B3)
ACEA C3
API SM/CF
®
HAVOLINE ULTRA S
SAE 5W-30
SAE 5W-40
0.850
0.850
232
232
-42
-42
73.0
84.0
Approvals:
BMW Longlife-04 (in EU)
MercedesBenz
229.31/229.51
VW 502.00/505.00
VW 505.01 (5W-40)
Porsche (5W-40)
12.3
14.0
4
High quality engine oil for modern passenger
cars with demanding engine performance. It
can be used in both petrol and diesel fueled
cars in various climate conditions. It helps wear
protection and cleanliness of the engine in the
extended drain period. It has very good lowtemperature performance, reduces exhaust
emissions and has long-life performance, thus
reducing maintenance time and costs.
This top tier engine oil has been designed for
prolonging the life of car emission reduction
systems and maintaining their efficiency
without compromising engine durability. It is
suitable for both petrol and diesel engines, but
it is especially recommended as an extended
drain oil for use in BMW and Daimler
passenger car diesel engines that are equiped
with particulate filters.
PASSENGER CAR ENGINE OILS
Product name
Kinematic
Density Flash point Pour
o
2
point,
viscosity, mm /s
at 15 C (COC),
o
o
o
kg/l
min, C max, C at 40 C at 100oC
Approvals:
VW 504.00/507.00
(LongLife Service QG-1)
Porsche Cayenne V6
®
HAVOLINE ULTRA V
SAE 5W-30
0.849
230
-42
71.1
Performance Claims /
Approvals /
Recommendations
11.5
ACEA A3/B4
HAVOLINE® ULTRA BM
SAE 5W-30
HAVOLINE® ULTRA G
LONGLIFE
SAE 5W-30
0.859
232
-42
69.4
Approvals:
VW 502.00/505.00
MercedesBenz 229.5
BMW LongLife Oil-01
12.2
ACEA A3/B3
0.855
226
-39
70.0
11.7
Approvals:
Opel/GM-LL-A-025
Opel/GM-LL-B-025
5
Description
A high performance engine oil specially
designed for the use in VW/ Audi gasoline and
diesel engines with prolonged maintenance
intervals (known as Longlife Service QG1),
including direct injected gasoline engines (FSI)
and diesel engines with unit injectors and
particulate filters (DPF). It can not be used in
R5 and V10 direct injected diesel engines with
unit injectors with or without DPF. For these
engines only VW 506.01 oils should be used.
Formulated from synthetic base oils, and
advanced high performance additive
components, to provide improved durability for
long life performance, wear protection, cold
temperature performance and reduced
emissions. It is approved by the BMW
specification "longlife oil-01".
Formulated from synthetic base oils and
advanced high performance additive
components, to provide improved durability for
long life performance, wear protection, cold
temperature performance and reduced
emissions.
PASSENGER CAR ENGINE OILS
Product name
Kinematic
Density Flash point Pour
o
2
point,
viscosity, mm /s
at 15 C (COC),
o
o
o
kg/l
min, C max, C at 40 C at 100oC
Performance Claims /
Approvals /
Recommendations
HAVOLINE® ENERGY EF
SAE 5W-30
0.848
226
-36
55.0
10.0
ACEA A5/B5
ACEA C1
HAVOLINE® ENERGY MS
SAE 5W-30
0.851
224
-36
55.0
10.0
ACEA A5/B5
ACEA C2
HAVOLINE® ENERGY
SAE 5W-30
ACEA A1/B1
A3/B3 (performance level)
API SL/Energy Conserving
0.850
230
-45
57.0
10.3
Approvals:
Ford WSS M2C913-B
Jaguar WSS M2C913-B
6
Description
It is recommended for use as a catalyst
compatible oil in high performance gasoline
and diesel passenger cars and light duty diesel
vans equipped with DPF and TWC which
require low friction, low viscosity, low SAPS
oils.
It is recommended for use as a catalyst
compatible oil in high performance gasoline
and diesel passenger cars and light duty diesel
vans equipped with DPF and TWC which
require low friction, low viscosity, mid SAPS
oils.
An engine oil based on synthetic base oils and
advanced additive package, to provide
improved durability for long life performance,
wear protection, cold temperature
performance, reduced emissions and fuel
efficiency. Gives greater engine power, helps
protection of the engine in demanding
conditions.
PASSENGER CAR ENGINE OILS
Product name
Kinematic
Density Flash point Pour
o
2
point,
viscosity, mm /s
at 15 C (COC),
o
o
o
kg/l
min, C max, C at 40 C at 100oC
Performance Claims /
Approvals /
Recommendations
Description
Part-synthetic Engine Oils
ACEA A3/B4 (incl. A3/B3)
API SL/CF
HAVOLINE® EXTRA
SAE 10W-40
HAVOLINE® DIESEL
EXTRA
SAE 10W-40
0.881
224
-33
100.5
14.6
Approvals:
VW 505.00
MeredesBenz 229.1
ACEA A3/B4 (incl. A3/B3)
API SL/CF
0.881
224
-33
100.5
14.6
Approvals:
VW 505.00
MeredesBenz 229.1
Multigrade engine oil for passenger cars. It has
good thermal stability and very good viscosity temperature properties. It shows low oil
consumption tendency and it is particularly
recommended for modern high output engines,
including those incorporating up to date leaner
burn gasoline engine technology and those
equipped with catalytic exhaust systems.
Multigrade engine oil for diesel passenger cars.
It has good thermal stability and very good
viscosity - temperature properties. It shows low
oil consumption tendency and it is particularly
recommended for modern high output engines,
including those equipped with catalytic exhaust
systems.
Mineral Engine Oils
HAVOLINE® PREMIUM
SAE 15W-40
SAE 20W-50
ACEA A2 and B2
API SL/CF
0.883
0.889
228
234
-27
-27
112.2
160.9
14.5
18.1
Performance level:
VW 505.00
MercedesBenz 229.1
7
Mineral oil based lubricant, which gives a good
level of engine protection for both petrol and
diesel fueled cars. It helps engine retain its
efficiency during its lifetime. Engine sludge and
varnish deposits are guarded against and
friction and wear are reduced.
HEAVY DUTY DIESEL ENGINE OILS
Product
Density Flash point Pour
point,
at 15oC (COC),
o
kg/l
typ. oC
min, C
Kinematic
2
viscosity, mm /s
at 40oC at 100oC
Performance Claims /
Approvals /
Recommendations
Description
Synthetic Engine Oils
ACEA E7/E6/E4
URSA® ULTRA X
SAE 10W-40
0.860
238
-33
87.8
Approvals:
Daimler MB 228.51
Volvo VDS-3
Renault RLD-2, RXD
MAN M3477
MTU Type 3.1 (pending)
13.5
Performance level:
DAF HP-2 (see manual on
E4 xW-40 oils)
MAN M3277 CRT
ACEA E4
API CF
URSA® PREMIUM FE
SAE 5W-30
0.859
230
-48
74.7
Approvals:
Daimler MB 228.5
Volvo VDS-2
MAN M3277
Renault Trucks RXD
DAF HP-1/HP-2
12.0
Performance level:
MTU Type 3
8
Ultra High Performance Diesel engine oil
(UHPD) with low sulphated ash, phosphorus
and sulphur content (low SAPS). It contains
synthetic base stock and is designed for the
use in the latest Euro 4 and Euro 5 diesel
engines. Designed to give good protection of
after treatment systems (DPF/CRT) and
therefore applicable for buses equipped with
such systems. This oil is also suitable for
engines using SCR technology (Selective
Catalytic Reduction).
A synthetic engine oil for heavy duty diesel
engines in trucks, buses and off-road
machinery. It is recommended for use in
engines where manufacturers do not give
formal approvals, but instead issue lists of
performance requirements for lubricants in use.
This oil has very good performance and
prolonged durability in service and improves
fuel efficiency of the engine.
HEAVY DUTY DIESEL ENGINE OILS
Product
Density Flash point Pour
point,
at 15oC (COC),
o
kg/l
typ. oC
min, C
Kinematic
2
viscosity, mm /s
at 40oC at 100oC
Performance Claims /
Approvals /
Recommendations
Description
Semi-synthetic Engine Oils
ACEA E7/E4
API CI-4
Approvals:
Daimler MB 228.5
Deutz DQC III
MAN M3277
Renault RLD-2, RXD
Scania LDF-2
Volvo VDS-3
®
URSA TDX
SAE 10W-40
0.867
226
-39
89.6
13.5
Performance level:
Cummins CES
20071/20072/20077/20078
DDC/MTU Type 3
Mack EO-M Plus
9
A part of the Ursa SHPD family of the so called
"High Sulphated Ash" products. It was
designed to conform to the updated ACEA
specifications and to meet more challenging
OEM requirements. Its robust formulation is
designed for longer drain intervals and
therefore it represents a well suited product for
international transport trucks that aren’t fitted
with DPFs or CRT. Due to its high TBN it’s also
applicable for regions where higher sulphur
diesel fuels are still used, without
compromising the drain interval.
HEAVY DUTY DIESEL ENGINE OILS
Product
Density Flash point Pour
point,
at 15oC (COC),
o
kg/l
typ. oC
min, C
Kinematic
2
viscosity, mm /s
at 40oC at 100oC
Performance Claims /
Approvals /
Recommendations
ACEA E7
API CI-4/CF
URSA® SUPER TDS
SAE 10W-40
0.873
224
-33
99.7
Approvals:
Scania LDF-2
Daimler MB 228.3
Volvo VDS-3
MAN M3275
Renault RLD-2
MTU Type 2
14.5
Performance level:
Cummins CES 20078
Mack EO-M Plus
Description
A part of a Super High Performance family of
heavy duty diesel engine oils, designed to
conform to the updated ACEA, API and OEM
performance standards for heavy duty diesel
engines. Ursa Super TDS is unique in Texaco
product range in the sense that it has the latest
Scania approval for long drain applications for
the Scania Euro 4 engines but doesn’t require
a complete synthetic and expensive base oil
composition to achieve this performance. The
formulation is a very cost effective LDF-2
approved product.
Part-synthetic Engine Oils
ACEA E7
ACEA E9
API CJ-4
API SM
®
URSA ULTRA
SAE 10W-30
0.870
204
-30
80.0
Approvals :
MAN M3275
MB 228.31
Cummins 20081
Renault RLD-3
Volvo VDS-4
12.0
10
High performance, low emissions heavy duty
diesel engine lubricants based upon the
Chevron ISOSYN® Technology. Formulated to
meet current industry and engine
manufacturers' performance requirements.
These oils contain advanced additive
technology to provide excellent engine
protection for diesel engines meeting Euro IV
and Euro V emission requirements and for
2007 EPA exhaust particulate emission
standards for on highway diesel trucks using
Ultra Low Sulphur Diesel (ULSD).
HEAVY DUTY DIESEL ENGINE OILS
Product
Density Flash point Pour
point,
at 15oC (COC),
o
kg/l
typ. oC
min, C
Kinematic
2
viscosity, mm /s
at 40oC at 100oC
Performance Claims /
Approvals /
Recommendations
ACEA E7/E5, A3/B4 (A3/B3)
API CF/CI-4/SL
Global DHD-1
URSA® SUPER TD
SAE 10W-40
0.874
215
-36
93.7
Approvals:
Daimler MB 228.3/229.1
Volvo VDS-3
Renault RLD-2
MAN M3275
Cummins CES 20076/77/78
Caterpillar ECF-1a
13.5
Performance level:
Mack EO-M Plus
Description
A part of a Super High Performance family of
heavy duty diesel engine oils, designed to
conform to the updated ACEA, API and OEM
performance standards for heavy duty diesel
engines. Ursa Super TD is recommended for
use in heavy duty truck and bus operations,
and/or when extended oil drain intervals for
both the naturally aspirated and turbocharged
engines are required. For the correct oil drain
intervals, user is advised to consult the relevant
engine manual or the manufacturer. Also
recommended for DAF, Iveco, Scania (E7)
Non-conventional Engine Oils
ACEA E7
ACEA E9
API CJ-4
API SM
URSA® ULTRA
SAE 15W-40
0.881
215
-30
117.0
Approvals:
MAN M3275
Cummins 20081
Renault RLD-3
Volvo VDS-4
Mack EO-O Premium Plus
2007
15.4
11
High performance, low emissions heavy duty
diesel engine lubricants based upon the
Chevron ISOSYN® Technology. Formulated to
meet current industry and engine
manufacturers' performance requirements.
These oils contain advanced additive
technology to provide engine protection for
diesel engines meeting Euro IV and Euro V
emission requirements and for 2007 EPA
exhaust particulate emission standards for on
highway diesel trucks using Ultra Low Sulphur
Diesel (ULSD).
HEAVY DUTY DIESEL ENGINE OILS
Product
Density Flash point Pour
point,
at 15oC (COC),
o
kg/l
typ. oC
min, C
Kinematic
2
viscosity, mm /s
at 40oC at 100oC
Performance Claims /
Approvals /
Recommendations
Description
Mineral Engine Oils
ACEA E7/E5/E3/B3/A3/A2
API CF/CI-4/SL (15W-40)
API CH-4 (20W-50)
Global DHD-1
Approvals:
Daimler MB 228.3/229.1
Volvo VDS-3
Renault RLD-2
MAN M3275 (15W-40)
Caterpillar ECF-1a
®
URSA SUPER TD
SAE 15W-40
SAE 20W-50
0.889
0.894
220
238
-39
-36
108.4
165.3
14.5
18.5
Performance level:
Mack EO-M Plus
Cummins CES 20076/77/78
ACEA E2/B2/A2
API CG-4/SJ (licensable)
URSA® SUPER LA
SAE 15W-40
SAE 20W-50
0.884
0.888
226
234
-27
-24
108.6
165.7
Approvals:
Volvo VDS (15W-40)
MAN 271
MTU Type 1
14.5
18.8
Performance level:
Daimler MB 228.1/229.1
Mack EO-L (15W-40)
12
A part of a Super High Performance family of
heavy duty diesel engine oils, designed to
conform to the updated ACEA, API and OEM
performance standards for heavy duty diesel
engines. Ursa Super TD is recommended for
use in heavy duty truck and bus operations,
and/or when extended oil drain intervals for
both the naturally aspirated and turbocharged
engines are required. For the correct oil drain
intervals, user is advised to consult the relevant
engine manual or the manufacturer. Also
recommended for DAF, Iveco, Scania (E7).
This product is available in multigrades and
monogrades, is part of a Texaco's heavy-duty
diesel engine oil family. Well suited for use in
mixed fleet Diesel and Petrol operations, where
it facilitates rationalisation of lubricants,
enables cleaner, smoother-running engines
and helps equipment to have a longer working
life. Also recommended for Caterpillar, Allison
C-4, Iveco, Scania, DAF, Cummins, Renault.
HEAVY DUTY DIESEL ENGINE OILS
Product
Density Flash point Pour
point,
at 15oC (COC),
o
kg/l
typ. oC
min, C
Kinematic
2
viscosity, mm /s
at 40oC at 100oC
ACEA E2
API CF/SJ
®
URSA SUPER LA
MONOGRADES
SAE 10W
SAE 20W-20
SAE 30
SAE 40
SAE 50
Performance Claims /
Approvals /
Recommendations
0.880
0.884
0.887
0.892
0.897
218
232
230
236
254
-30
-30
-27
-24
-30
40.6
60.5
83.1
137.2
202.2
Approvals:
MAN 270
MTU Type 1 (SAE 30 & 40)
6.7
8.5
10.8
14.5
18.8
Performance level:
Daimler MB 228.0
API CF/CF-2
®
URSA EXTRA DUTY
SAE 40
0.886
238
-27
97.1
11.4
Recommended for:
Detroit Diesel 2 stroke
engines
Description
Monograde oils for heavy duty diesel engines.
They are primarily intended for use in
turbocharged and naturally aspirated diesel
engines in various types of service in heavyduty trucking, construction, mining and farm
equipment. Suitable for use when temperature
variations are not likely to be present, or when
oil is changed in short periods. It can also be
used in retarders. Also recommended for RVI,
DAF, Iveco, Scania, Caterpillar.
Ursa Extra Duty is a low ash monograde
engine oil specifically formulated for heavy duty
two-stroke diesel engines (Detroit Diesel)
operating in both on- and off-highway service.
Railroad Diesel Engine Oils
DIESEL ENGINE OIL
(DEO) 13 MG
SAE 20W-40
0.896
248
-12
135.3
LMOA 4 Long Life
GE
EMD
15.2
13
Diesel Engine Oil 13MG 20W-40 is an SAE
20W-40, 13BN, LMOA 4 Long Life Zn-free
railroad engine oil. It is recommended for use
in naturally aspirated and turbocharged railroad
engines which require Zn-free oils. The sulphur
in the fuel should not exceed 1.0%wt.
SMALL ENGINE LUBRICANTS
Product
Kinematic
Density Flash point Pour
2
o
point,
viscosity, mm /s
at 15 C (COC),
o
o
kg/l
min, C max, C at 40oC at 100oC
Performance Claims /
Approvals /
Recommendations
Description
Performance claims:
API TC
JASO FC/FD
ISO-L-EGD
Husqvarna HVA 346& 372
Rotax Snowmobile 253
Kart Racing
Fully synthetic oil for two stroke engines.
Provides reduced smoke emission of the
engine. Although it has been specially
developed for motorbike racing, the product
can also be successfully used in kart racing,
chainsaws and snowmobiles. It has been
developed for a 50:1 fuel to oil ratio. However,
the recommendations of the OEM should be
adhered to if another dosage is required.
Performance claims:
API TC
JASO FC/FD
TISI
ISO-L-EGD (for chainsaws)
Part synthetic two-stroke engine oil formulated
with advanced low ash additive package. Very
good miscibility with gasoline is obtained by the
addition of a high flash point diluent. It has
been developed for a 50:1 fuel to oil ratio, but
the recommendations of the OEM should be
adhered to if another dosage is required. Also,
it can be used for chainsaws and snowmobiles
under relatively mild temperature conditions.
Oils for 2-Cycle Land Application
MOTEX® 2T-SX
MOTEX® 2T-X
* Flash Point (PM), oC
0.888
0.868
80*
100
-42
-18
51.0
53.4
8.6
8.3
14
SMALL ENGINE LUBRICANTS
Product
MOTEX® 2T
Kinematic
Density Flash point Pour
2
o
point,
viscosity, mm /s
at 15 C (COC),
o
o
kg/l
min, C max, C at 40oC at 100oC
0.878
154
-6
78.0
Performance Claims /
Approvals /
Recommendations
Performance claims:
API TC
JASO FB
10.1
Description
Two-cycle engine oil for land applications,
which gives good performance for low to
medium severity air cooled 2T type applications
such as in mopeds, light motorcycles and lawn
mowers. It is developed for a 50:1 fuel to oil
ratio. However the recommendations from the
OEM should be followed if different dosage is
required. Not recommended for chainsaw or
other severe duty applications.
2-Cycle Outboard Engine Oils
Approvals:
®
NMMA TC-W3
MOTEX® S OUTBOARD
0.946
112
-45
55.5
9.1
Performance claims:
NMMA TC-W II/TC-W
Approvals:
®
NMMA TC-W3
®
MOTEX 2T OUTBOARD
0.873
134
-39
54.0
8.7
Performnace claims:
NMMA TC-W II/TC-W
* Flash Point (PM), oC
15
Biodegradable, solvent free engine oil for watercooled two cycle engines formulated for use at
all engine manufacturers fuel to oil ratios. It is
perfectly miscible with current types of gasoline
and does not show gel formation tendency.
A two-stroke outboard engine oil formulated
with high quality mineral base oils,
recommended for water-cooled 2T engines. It
is formulated for use at all engine
manufacturers fuel to oil ratios and provides
protection against spark plug fouling and
surface ignition, as well as protection against
rust, wear, corrosion, exhaust port plugging,
ring sticking and varnish formation.
SMALL ENGINE LUBRICANTS
Product
Kinematic
Density Flash point Pour
2
o
point,
viscosity, mm /s
at 15 C (COC),
o
o
kg/l
min, C max, C at 40oC at 100oC
Performance Claims /
Approvals /
Recommendations
Description
4-Cycle Mobile Engine Oils
ACEA A3
MOTEX® 4T-X
SAE 10W-40
* Flash Point (PM), oC
0.881
224
-27
100.5
14.6
Performance claims:
API SL
JASO MA
16
Partially synthetic multigrade engine oil
designed for use in four stroke motorcycles in
both normal operating conditions and in racing
applications. Also recommended for the
lubrication of portable power equipment such
as generators, pumps, mowers, etc.
MANUAL TRANSMISSION FLUIDS
Product
GEARTEX® EP-A
SAE 80W
SAE 75W-90
SAE 85W-90
GEARTEX® EP-B
SAE 85W-90
GEARTEX® EP-C
SAE 80W-90
SAE 85W-140
Kinematic
Density Flash point Pour
o
point,
(COC),
viscosity, mm2/s
at 15 C
o
o
kg/l
min, C max, C at 40oC at 100oC
0.889
0.882
0.895
0.900
0.899
0.907
220
190
230
220
212
214
-36
-45
-24
-33
-33
-18
82.0
77.3
178.0
175.0
135.0
360.0
Performance Claims /
Approvals /
Recommendations
Approvals:
ZF TE-ML
02A/08/16A/17A/19A
MB 235.1
MAN
341 Type E1/Type Z1
9.5
14.3
16.5
Performance claims:
API GL-4
Approvals:
ZF TE-ML
05A/07A/08/
16C/17B/19B/21A
MB 235.0
MAN 342 Type M1
Volvo 97310-90
16.8
Performance claims:
API GL-5
Approvals:
ZF TE-ML
5A/07A/08/16D/
17B/21A
14.0
26.1
Performance claims:
API GL-5
MIL-L-2105C/D
17
Description
Mineral-based EP gear oil recommended for
automotive gearboxes, steering boxes,
transaxles and hypoid rear axles, offering the
following advantages: oxidation stability and
protection of gear components, low pour point,
foam resistance, protection against rust,
compatibility with elastomers.
Mineral-based EP gear oil recommended for
automotive gearboxes, steering boxes,
transaxles and hypoid rear axles, offering the
following advantages: oxidation stability and
protection of gear components, low pour point,
foam resistance, protection against rust,
compatibility with elastomers.
Mineral-based EP gear oil recommended for
automotive gearboxes, steering boxes,
transaxles and hypoid rear axles, offering the
following advantages: oxidation stability and
protection of gear components, low pour point,
foam resistance, protection against rust,
compatibility with elastomers.
MANUAL TRANSMISSION FLUIDS
Product
GEARTEX® LS
SAE 85W-90
SAE 85W-140
GEARTEX® S4
SAE 75W-90
MULTIGEAR®
SAE 80W-90
SAE 80W-140
Kinematic
Density Flash point Pour
o
point,
(COC),
viscosity, mm2/s
at 15 C
o
o
kg/l
min, C max, C at 40oC at 100oC
0.902
0.907
210
214
-30
-15
177.0
325.0
16.8
25.0
0.853
182
-45
75.0
14.1
0.898
0.905
210
204
-30
-36
133.0
216.0
Performance Claims /
Approvals /
Recommendations
Approvals:
ZF TE-ML
05C/12C/16E/21C
Performance claims:
API GL-5
Performance claims:
API GL-4
VW 501.50
Approvals:
ZF TE-ML
02B/05A/07A/08/12E/
16B/16D/17B/19B/21A
MAN 341 Type E2/
3343 Type M
14.0
25.0
Performance claims:
API GL-4/GL-5/MT-1
DAF
NATO O-226/O-228
Scania STO 1:0
18
Description
Mineral-based EP gear oil designed for use in
limited slip differentials. It contains a special
friction modifier additive in order to give the
specific frictional properties which are essential
for the correct operation of this type of
equipment. It will help prevent noise and
vibrations from developing.
Fully synthetic multigrade EP gear oil designed
for year round automotive uses. It will assist
improved shiftability both in high speed, high
temperature driving and in low temperature
starting conditions.
Additionally, it can help improve fuel economy
of the vehicle.
Total drive line oil suitable for use in both
automotive and heavy duty equipment. Helps
protection of gear equipment under heavy
loads and surface stress, i.e. spalling, pitting,
scoring and wear. It may therefore be used in
both manual transmissions and final drive
units, offering the advantage of product
rationalisation.
MANUAL TRANSMISSION FLUIDS
Product
MULTIGEAR® S
SAE 75W-90
Kinematic
Density Flash point Pour
o
point,
(COC),
viscosity, mm2/s
at 15 C
o
o
kg/l
min, C max, C at 40oC at 100oC
Performance Claims /
Approvals /
Recommendations
Approvals:
ZF TE-ML
02B/05B/07A/08/
12B/16F/17B/19C/21B
MAN 341 Type E3/
3343 Type S
0.860
202
-54
98
14.7
Performance claims:
API GL-4/GL-5/MT-1
DAF
MB 235.8
NATO O-226
Scania STO 1:0
MULTIGEAR® S
SAE 75W-140
0.867
185
-46
185
Approvals:
Ford M2C-192A
Scania STO 1:0
U.S. Military
MIL-PRF-2105E
26.0
Performance claims:
API GL-5/MT-1
19
Description
Fully synthetic total drive line oil suitable for
use in both automotive and heavy duty
equipment. It may be used in both manual
transmissions and final drive units, offering the
advantage of product rationalisation. The high
quality shear-stable VI Improver additives have
been used, ensuring that the oil’s viscosity will
not drop during its service lifetime. This also
means that the oil can retain required viscosity
for effective lubrication even at high operating
temperatures.
Fully synthetic axle fluid suitable for use in both
automotive and heavy duty equipment. The
high quality shear-stable VI Improver additives
have been used, ensuring that the oil’s
viscosity should not drop during its service
lifetime. This also means that the oil can retain
required viscosity for effective lubrication even
at high operating temperatures.
MANUAL TRANSMISSION FLUIDS
Product
Kinematic
Density Flash point Pour
o
point,
(COC),
viscosity, mm2/s
at 15 C
o
o
kg/l
min, C max, C at 40oC at 100oC
Performance Claims /
Approvals /
Recommendations
Approvals:
Eaton transmissions
(synthetic,
500.000 km / 3 years)
Volvo 97305
MULTIGEAR® MTF HD
0.847
244
-54
54.1
Performance claims:
API GL-4
MAN 341 Type E4/Z4
MB 235.4/235.11
Volvo 97307
ZF TE-ML 02
(400.000 km/3 years)
9.2
Approvals:
MAN 341 Type E3/Type Z3
DAF
ZF TE-ML 02D
Eaton transmissions
(semi-synthetic,
300.000 km / 2 years)
®
MULTIGEAR MTF
SAE 75W-80W
0.876
228
-48
62.0
9.2
Performance claims:
API GL-4
MB 235.4
Volvo 97305
20
Description
Manual transmission fluid suitable for extended
drain in heavy duty synchronized manual truck
transmissions. It is formulated with fully
synthetic base oils and a specially balanced
additive combination. In addition to its formal
OEM approvals, field trial data have been
amassed demonstrating its capability for
extended drain in numerous truck applications.
Field trial vehicles include those manufactured
by MAN, Mercedes, Scania and Volvo;
transmissions include those manufactured by
the truck constructors themselves and by ZF,
including AS Tronic models and models fitted
with intarders.
Manual transmission fluid formulated with
advanced additive technology and a
combination of synthetic PAO and high quality
mineral base oils. Developed in response to
higher power output requirements in manual
transmissions of commercial vehicles, it
outperforms conventional automotive MTFs the product is capable of withstanding
prolonged periods of service at temperatures
as high as 150°C. It can be used in
transmissions fitted with Intarders (Scania) and
Retarders (Voith).
MANUAL TRANSMISSION FLUIDS
Product
MULTIGEAR® RN
PREMIUM
SAE 75W-80
MULTIGEAR® 75W-90 R
Kinematic
Density Flash point Pour
o
point,
(COC),
viscosity, mm2/s
at 15 C
o
o
kg/l
min, C max, C at 40oC at 100oC
0.859
0.876
214
200
-45
-48
47.3
81.0
Performance Claims /
Approvals /
Recommendations
Performance claims:
Renault (Type P)
API GL-4
8.9
Approvals:
Land Rover:
axles
Opel/Vauxhall Frontera:
front axle
14.4
Performance claims:
API GL-4/GL-5/MT-1
21
Description
Manual transmission fluid formulated with
advanced additive technology and high quality
hydrocracked base oils. It provides the right
answer to synchroniser shift problems in
passenger car manual transmissions and
transaxles. Its technology has been carefully
selected to provide improved frictional
characteristics and fluidity performance,
helping a smooth gear change feeling even in
extreme conditions such as low temperature,
humidity or risk of water ingress.
Total drive line oil suitable for use in both API
GL-4 and API GL-5 applications. It is blended
from a high performance additive package and
a combination of synthetic poly alpha olefin and
high quality solvent refined paraffinic base oils.
Product can be applied in those applications
where an SAE 75W-90, 80W-90, 85W-90 or 90
oil is currently recommended.
MANUAL TRANSMISSION FLUIDS
Product
TEXACO® MTF 94
Kinematic
Density Flash point Pour
o
point,
(COC),
viscosity, mm2/s
at 15 C
o
o
kg/l
min, C max, C at 40oC at 100oC
0.886
208
-45
53.0
Performance Claims /
Approvals /
Recommendations
Approvals:
Rover
Land Rover
Mini
Honda
10.5
Performance claims:
API GL-4
ZEXEL
22
Description
Specific manual transmission fluid, formulated
with dedicated additive technology and nonconventional base stocks, developed in
response to higher power output requirements
in manual transmissions and subsequent
concerns about gear pitting resistance and
bearing durability. It can be used over longer
drain periods compared to commonly available
manual transmission fluids.
AUTOMATIC TRANSMISSION FLUIDS
Product
TEXAMATIC® 7045E
Dexron III
SYNTHETIC ATF
HEAVY DUTY
Density Flash point Pour
Kinematic
o
point,
(COC),
at 15 C
viscosity, mm2/s
o
o
kg/l
min, C max, C at 40oC at 100oC
0.862
0.854
200
228
-51
-45
33.8
35.3
Performance Claims /
Approvals /
Recommendations
Approvals:
GM Dexron IIIG (obsolete
specification)
MAN 339 Type V1
Voith H55.6335.3x
ZF TE-ML 04D/17C
ZF Lenksysteme TE-ML 09
7.4
Performance claims:
Aishin Warner
Allison C-4
Ford MERCON
Caterpillar TO-2
Approvals:
Allison C-4 / TES-389
Ford MERCON V
GM Dexron IIIH (obsolete
specification)
MAN 339 Type V1/V2/Z2
Voith H55.6335.3x/
H55.6336.3x
Volvo 97341
ZF TE-ML 04D/14B/16L
7.4
Performance claims:
Allison TES 295
MB 236.91
ZF TE-ML 14C
23
Description
A red dyed fluid which provides excellent
performance in automatic transmission
systems in passenger cars, trucks, buses and
off-highway heavy duty diesel machines. Its
high viscosity index permits use over a wide
temperature range by providing very good low
temperature fluidity and, at the same time,
retaining the desired viscosity at high
temperature conditions. It is suitable for many
applications, not only as an ATF but also as a
multigrade hydraulic fluid (approximately ISO
32 grade).
Specially engineered oil for heavy duty
automatic truck and bus transmissions
operating in extended drain service. It is also
approved as Ford MERCON® V and the former
®
General Motors DEXRON -IIIH Revision fliud,
making it suitable for use in a wide range of
passenger car automatic transmissions (except
for 6-speed applications). It is also suitable for
use in industrial and mobile hydraulic systems.
AUTOMATIC TRANSMISSION FLUIDS
Product
TEXAMATIC® 4291
Kinematic
Density Flash point Pour
o
point,
(COC),
viscosity, mm2/s
at 15 C
o
o
kg/l
min, C max, C at 40oC at 100oC
0.870
202
-48
37.7
Performance Claims /
Approvals /
Recommendations
Approvals:
GM Dexron IID (obsolete
specification)
Allison C-4
Voith H55.6335.3x
ZF TE-ML
03D/04D/11A/14A/17C
ZF Lenksysteme TE-ML 09
MB 236.5/236.7
MAN 339 Type V1/Z1
7.3
Description
Product suitable for many applications, not only
as an automatic transmission fluid but also as a
power steering fluid and as a multigrade
hydraulic fluid (approximating to an ISO 46
grade). Applications include automatic
transmissions and power steering systems in
passenger cars and trucks, off-highway
agricultural and mining equipment, mobile
hydraulic systems and industrial applications.
Performance claims:
Caterpillar TO-2
TEXAMATIC® 9226
0.868
193
-45
35.8
Approvals:
GM Dexron IID (obsolete
specificiation)
Voith H55.6335.3x
ZF TE-ML 04D/11A/17C
ZF Lenksysteme TE-ML 09
7.4
24
Product suitable for many applications, not only
as an automatic transmission fluid but also as a
power steering fluid and as a multigrade
hydraulic fluid (approximating to an ISO 32
grade). Applications include automatic
transmissions and power steering systems in
passenger cars and trucks, off-highway
agricultural and mining equipment, mobile
hydraulic systems and industrial applications.
AUTOMATIC TRANSMISSION FLUIDS
Product
®
TEXAMATIC 9330
Kinematic
Density Flash point Pour
o
point,
(COC),
viscosity, mm2/s
at 15 C
o
o
kg/l
min, C max, C at 40oC at 100oC
0.869
206
-48
35.9
Performance Claims /
Approvals /
Recommendations
Approvals:
Ford ESW-M2C 33-F
Ford ESP-M2C 33-G
7.3
Approvals:
MercedesBenz 236.2
TEXAMATIC® 1585
0.881
208
-51
38.0
7.3
Performance claims:
GM Type A Suffix A
MAN 339 Type A (obsolete
specification)
25
Description
An automatic transmission fluid for applications
requiring a Ford Type F or Type G product. It is
also suitable for use in other transmissions,
hydraulic systems, power steering units and
torque converters requiring this type of product.
This product is formulated without the use of
friction modifiers and because of that, it should
not be used in applications which require a
Ford MERCON® product.
Mineral-based ATF. It helps ease gear
selection, protection of gear components, and
has low foaming tendency. Although designed
as ATF, the actual applications include manual
transmission in cars and 4x4 vehicles as well
as steering systems in commercial vehicles.
POWER STEERING FLUIDS
Product
Kinematic
Density Flash point Pour
2
o
point,
viscosity, mm /s
at 15 C (COC),
o
o
kg/l
min, C max, C at 40oC at 100oC
Performance Claims /
Approvals /
Recommendations
Approvals:
MAN M 3289
HAVOLINE® CHL 8642
HAVOLINE® PSF 9109
0.823
0.848
156
158
-54
-51
19.2
20.0
6.3
Performance claims:
VW TL521.46
MB 345.0
Description
Advanced generation high performance power
steering fluid designed to be used in hydraulic
and electro-hydraulic units. It is formulated with
synthetic base oils along with carefully selected
additives to provide good low temperature
performance. Additionally it contains a specific
additive component which has been shown to
reduce steering pump noise (squeal).
Advanced generation high performance power
steering fluid designed to be used in hydraulic
and electro-hydraulic units. It is formulated with
specially selected base oils along with carefully
selected additives to provide good low
temperature performance. Additionally it
contains a specific additive component which
has been shown to reduce steering pump noise
(squeal).
6.0
26
POWER STEERING FLUIDS
Product
COLD CLIMATE POWER
STEERING FLUID
Kinematic
Density Flash point Pour
2
o
point,
viscosity, mm /s
at 15 C (COC),
o
o
kg/l
min, C max, C at 40oC at 100oC
0.860
215
-51
26.5
Performance Claims /
Approvals /
Recommendations
Approvals:
ZF TE-ML 09
Landrover:
All vehicles, for Power
Steering and Active
Cornering Enhancement
(ACE) systems
6.4
Performance claims:
General Motors GM 9985835
Chrysler MS 5931
Saab
PS FLUID 11872
0.876
215
-45
37.0
Approvals:
General Motors GM 9985010
Chrysler MS 5931
7.3
27
Description
It is blended from a mixture of synthetic and
mineral base oils along with carefully selected
additives to provide good performance in
power steering systems. Additionally it contains
a specific additive component which has been
shown to reduce steering pump noise (squeal).
This product is specially formulated to meet the
requirements of GM (Delphi Saginaw) and
Chrysler specifications covering fluids for use
in automotive power steering systems.
This product is blended from high quality
solvent refined paraffinic base oils along with
carefully selected additives to provide good
performance in power steering systems.
Additionally it contains a specific additive
component which has been shown to reduce
steering pump noise (squeal). PSF 11872 is
specially formulated to meet the requirements
of GM (Delphi Saginaw) and Chrysler
specifications covering fluids for use in
automotive power steering systems.
BRAKE FLUIDS
Product
BRAKE FLUID
DOT 4
Kinematic
Density Flash point Pour
2
o
point,
viscosity, mm /s
at 20 C (COC),
o
o
kg/l
min, C max, C at 40oC at 100oC
1.040
to
1.065
> 120
1000
to
1400
Performance Claims /
Approvals /
Recommendations
Performance claims:
FMVSS No.116:
DOT 4/DOT 3
SAE J 1703
ISO 4925
2.0
to
2.5
28
Description
Meets standards for clutch and brake fluids as
demanded by leading OEMs. Intended for use
in all applications demanding non-mineral
based brake fluids. It is formulated from polyalkene glycol ethers with high molecule mass
and poly-alkylene glycol ether borates with
advanced corrosion and oxidation inhibitors.
COOLANTS / ANTIFREEZE & CORROSION INHIBITOR
Product
Density Boiling Freezing
at 20oC point, protection
o
o
kg/l
C
C
Color
Nitrate,
silicate,
phosphate,
borate, amine
Performance Claims /
Approvals /
Recommendations
Description
Coolants / Antifreeze
HAVOLINE® XLC
Concentrate
50% dilution
40% dilution
HAVOLINE® AFC
Concentrate
TEXACO® ANTIFREEZE
AND SUMMER COOLANT
Concentrate
1.113
1.068
1.056
180
108
-40
-27
orange
Approved by number of
OEMs. For a detailed
overview please contact
our Area Sales Manager.
nil
1.125
174
contains
unsilicate and
coloured
borate
1.111
163
uncoloured
nil
29
Approved by number of
OEMs. For a detailed
overview please contact
our Area Sales Manager.
Approvals:
British Standard
BS6580:1992
Silicate-free additive system provides
protection against winter freezing and reduction
of the risk of boiling over in summer. This
product can be used for at least 650,000 km
(cca. 8,000 hours) in truck & bus applications
or 250,000 km (cca. 2,000 hours) for
passenger cars or 32,000 hours (or 6 years) for
stationary engines. It offers long-term
protection from corrosion to a wide range of
components and metals.
Mixed with the appropriate amount of water, it
is used as a cooling and heat transferring fluid
in combustion engines. It may be used with
confidence in engines manufactured from cast
iron, aluminium or combinations of the two
metals, and in cooling systems made of
aluminium or copper alloys.
Formulated with carboxylate technology,
combined with carefully selected inhibitors and
a highly effective bitterant, this product has
reduced toxicity when compared with traditional
antifreeze/coolants. It delivers cost-efficient,
reliable and robust year-round system
protection.
COOLANTS / ANTIFREEZE & CORROSION INHIBITOR
Product
Density
o
at 20 C pH value
kg/l
Cloud
point,
o
C
Color
Nitrate,
silicate,
phosphate,
borate, amine
Performance Claims /
Approvals /
Recommendations
Description
Corrosion Inhibitor
HAVOLINE® XLI
Concentrate
5% dilution
1.058
9.4
8.1
-15
uncoloured
Approved by number of
OEMs. For a detailed
overview please contact
our Area Sales Manager.
nil
30
A low-toxic, environmentally friendly inhibitor
concentrate. Mixed with the appropriate
amount of water, it is recommended as a
coolant, flushing fluid or hot test fluid for engine
blocks and all cooling systems. During
extensive field testing, the synergistic
combination of mono- and di-carboxylic acid
has proven to provide an excellent protection
for at least 32,000 hours in marine and
stationary applications. The product is
compatible with glycol-based engine coolants.
Depending on the actual application the
dosage may vary from 5-10% but a minimum
of 5 vol.% of Havoline XLI in water should be
used.
HAVOLINE® PERFORMANCE PLUS PRODUCTS
Product name
Kinematic
Density Flash point Pour
2
o
point,
(PM),
viscosity, mm /s
at 15 C
o
o
kg/l
min, C max, C at 40oC at 100oC
Performance Claims /
Approvals /
Recommendations
Description
Fuel System Treatments
HAVOLINE®
PERFORMANCE PLUS
(HPP) GASOLINE FUEL
SYSTEM CLEANER
0.882
79
6.9
A powerful conditioning additive designed to
remove deposits from injectors, valves and
combustion chambers. It is designed to be a
conditioning treat every 8,000 to 16,000
kilometers. It provides up to 93% clean up of
inlet valves, it is not harmful to catalysts, it
promotes corrosion protection of fuel system
and quickly restores engine power and lost
acceleration. It is supplied in 350 ml bottles.
One bottle treats 70 to 80 litres of fuel.
2.1
Specifically designed to provide cleaning of the
whole diesel fuel system, with the added
advantage of a Cetane improver which
improves diesel fuel combustion. It improves
lubrication when used with low sulfur diesel
fuels helping prevention of wear and premature
failure of injector pumps and injectors. It
reduces diesel knock, noise and smoothes
idling, reduces emissions and helps fuel
economy. It is supplied in 350 ml bottles. One
bottle treats 50 to 70 litres of fuel.
®
HAVOLINE
PERFORMANCE PLUS
(HPP) DIESEL FUEL
SYSTEM CLEANER
0.849
70
Please note that all HPP treatments are sold as part of
the Havoline Performance Plus Programme only.
For more information please contact our Area Sales Manager.
31
HAVOLINE® PERFORMANCE PLUS PRODUCTS
Product name
Kinematic
Density Flash point Pour
2
o
point,
(PM),
viscosity, mm /s
at 15 C
o
o
kg/l
min, C max, C at 40oC at 100oC
Performance Claims /
Approvals /
Recommendations
Description
Crank Case Treatment
HAVOLINE®
PERFORMANCE PLUS
(HPP) CRANK CASE
CLEANER
0.814
HPP Crank Case Cleaner helps to dissolve
deposits left in the crankcases of petrol and
diesel engines from previous oil fills. It can
restore compression by dissolving the deposits
from piston rings and hydraulic lifters. HPP
Crank Case Cleaner is used just prior to
draining the old oil. It will help to clean oil paths
and improve oil flow to critical engine
components.
min 63
Please note that all HPP treatments are sold as part of
the Havoline Performance Plus Programme only.
For more information please contact our Area Sales Manager.
32
UNIVERSAL OILS FOR OFF-ROAD MACHINERY
Product
Kinematic
Density Flash point Pour
o
point,
(COC),
Viscosity, mm2/s
at 15 C
o
o
kg/l
min, C max, C at 40oC at 100oC
Performance Claims /
Approvals /
Recommendations
Description
Super Universal Tractor Oils
Approvals:
Massey Ferguson
M1144/1145
SUPER UNIVERSAL
TRACTOR OIL EXTRA
SAE 10W-30
0.883
216
-42
66.0
Performance claims:
John Deere JDM J27
Ford ESN-M2C159-B1
API CE/CF-4/SF
CCMC D4/G2
MB 228.1
MIL-L-2104C/D
MIL-L-46152B/21260C
API GL-4
Allison C-3/C-4
Caterpillar TO-2
ZF TE-ML 06C/07B
DIN 51524/2 HV
AFNOR NF E 48602 HV
Vickers
Denison HF-0
10.3
33
A top tier product designed to meet the
requirements of current “Super Tractor Oil
Universal” (STOU) specifications. This means
that a single lubricant can be used in all of the
tractor’s oil systems. This allows for a reduction
in the number of products which must be
stocked, and minimizes the possibility of filling
the oil system with the wrong product. It
provides protection for petrol and diesel
powered engines, wear protection in gearboxes
and axles, smooth clutch operation, quiet,
trouble-free operation of wet brakes, power
delivery in hydraulic systems. It may also be
used in applications calling for a “Universal
Tractor Transmission Oil” (UTTO), although in
these cases Textran® TDH Premium is
recommended for better performance.
UNIVERSAL OILS FOR OFF-ROAD MACHINERY
Product
Kinematic
Density Flash point Pour
o
point,
(COC),
Viscosity, mm2/s
at 15 C
o
o
kg/l
min, C max, C at 40oC at 100oC
SUPER UNIVERSAL
TRACTOR OIL
SAE 15W-30
0.885
218
-33
78.0
Performance Claims /
Approvals /
Recommendations
Performance claims:
Ford ESN-M2C159-A/B
Massey Ferguson M1139
API CD/SE
API GL-4
DD Allison C-3
Caterpillar TO-2
Vickers
Denison HF-0
10.7
Description
A product designed to meet the requirements
of “Super Tractor Oil Universal” (STOU)
specifications. It provides protection for petrol
and diesel powered engines, wear protection in
gearboxes and axles, smooth clutch operation,
quiet, trouble-free operation of wet brakes,
power delivery in hydraulic systems.
Transmission/Hydraulic Oils
Approvals:
Volvo 97303 (WB101)
ZF TE-ML-03E/05F/06K
Massey Ferguson
M1143/M1145
TEXTRAN® TDH PREMIUM
0.884
224
-45
58.0
Performance claims:
JI Case MS 1206/1207/1209
John Deere JD 20C
Ford New Holland:
M2C 134 A/B/C/D
M2C 86 B/C
Massey Ferguson:
M1135/M1141
Caterpillar TO-2
DD Allison C-3
API GL-4
9.4
34
A transmission/hydraulic oil blended from
solvent refined base oils and special additives
to provide high viscosity index, resistance to
corrosion and oxidation, anti-wear, EP and
foaming properties. Intended for use in
transmissions, rear axles and hydraulic
systems on equipment where a “Universal
Tractor Transmission Oil” (UTTO) is required. It
is recommended for the advanced designs of
tractors and off-road equipment and approved
by Volvo, ZF and Massey Ferguson.
UNIVERSAL OILS FOR OFF-ROAD MACHINERY
Product
TEXTRAN® V32
Kinematic
Density Flash point Pour
o
point,
(COC),
Viscosity, mm2/s
at 15 C
o
o
kg/l
min, C max, C at 40oC at 100oC
0.873
220
-39
32.0
Performance Claims /
Approvals /
Recommendations
Approvals:
VoithTurbo Spec.:
3625-006072
(Type S/TP/DTP/VIR)
VoithTurbo Spec.:
3625-006073 (Type R)
5.5
Description
A transmission/hydraulic oil specifically
developed for the lubrication of heavily loaded
torque converters and turbo transmissions. It is
suitable for use in Voith turbo couplings in
industrial, marine and railway equipment; Voith
torque converter transmissions in shunting
locomotives and heavy duty construction
equipment; Voith hydrodynamic brakes in
railway and heavy duty automotive equipment.
It may also be used in moderately loaded
gearboxes and hydraulic systems.
Hydraulic/Differential Oils
Approvals:
Komatsu KES 07.868.1
®
TEXTRAN HD
SAE 10W
SAE 30
SAE 50
0.884
0.895
0.904
218
248
258
-42
-30
-27
41
89
230
6.5
10.6
19.6
Performance claims:
Caterpillar TO-4
Allison C-4
35
Product designed to meet the friction, wear and
elastomer compatibility requirements of the
Caterpillar TO-4 Transmission/Drive Train
specification. It helps smooth transmission
power transfer under high horsepower
conditions and maintains performance under
the severe operating conditions of heavy duty
equipment. It is formulated without VI
improvers, and hence there will be no viscosity
drop in service due to shearing effects.
GAS ENGINE OILS
Kinematic
Density Flash point Pour
2
o
point,
viscosity, mm /s
at 15 C (COC),
o
o
kg/l
min, C max, C at 40oC at 100oC
Product
GEOTEX® HD
SAE 40
0.891
240
-30
124.0
0.877
230
-18
124.0
Description
13.0
Performance claims:
API CD
Dorman Diesels
Fincantieri Diesels
GE Jenbacher
MWM-Deutz
Perkins Engines
Ruston Diesels
Mirrlees
MAN
Waukesha
This oil has been formulated to lubricate high
output gas engines, irrespective of the type of
gas being utilised. Also for dual-fuel or sparkignited gas engines in stationary applications. It
has a relatively high alkalinity reserve,
measured by TBN, for combating acidic
combustion products derived from trace gas
contaminants. It is recommended for use in
naturally aspirated or turbocharged gas
engines in stationary application, and running
on biogas or landfill gas. For gas engines
equipped with exhaust catalyst, it is
recommended that the user consults the
catalyst manufacturers for their limit on Zinc,
Phosphorus and Sulphated Ash level.
13.5
Performance claims:
API CD/CF
Caterpillar
Delaval
Deutz
GE Jenbacher
Superior
Wartsila
Waukesha
Worthington
This is a bright stock-free, low ash,
dispersant/detergent type engine oil based on
Chevron ISOSYN® Technology. Recommended
for four-stroke and selected two-stroke
stationary engines fueled by natural or
synthetic gas and gas from digester and landfill
sources.
®
CHEVRON HDAX
LOW ASH GAS ENGINE
OIL
SAE 40
Performance Claims /
Approvals /
Recommendations
36
GAS ENGINE OILS
Product
GEOTEX® LA
SAE 40
GEOTEX® PX
SAE 40
Kinematic
Density Flash point Pour
2
o
point,
viscosity, mm /s
at 15 C (COC),
o
o
kg/l
min, C max, C at 40oC at 100oC
0.892
0.849
242
230
-24
-33
126.0
88.8
Performance Claims /
Approvals /
Recommendations
Performance claims:
API CD
GE Jenbacher
MAN B&W
Deutz
MDE
MTU Type 1
Perkins
Rols Royce Bergen
Wartsila
Dresser-Rand (categ. III)
Caterpillar
Waukesha
Mirrlees
Performance claims:
MWM-Deutz
Ulstein Bergen
Caterpillar
Dorman Diesels
GE Jenbacher
MAN
Mirrlees
Perkins Engines
Pielstick
Ruston Diesels
Wartsila NSD
Waukesha
13.2
14.0
37
Description
A low ash, low TBN, mineral gas engine oil
specifically developed for lubricating naturally
aspirated and turbocharged gas engines in
stationary applications and using natural gas
as fuel. It contains low levels of Zinc and
Phosphorus elements, meeting the
requirement of many catalyst manufacturers.
A low ash, low TBN, gas engine oil specifically
developed for use in high performance
stationary gas engines running on natural gas
or other non-corrosive gases. It offers long
drain intervals. Its low Zinc and Phosphorus
content makes it suitable for use in gas
engines using exhaust catalyst.
GAS ENGINE OILS
Product
GEOTEX® LF
SAE 40
GEOTEX® MULTIGRADE
SAE 15W-40
Kinematic
Density Flash point Pour
2
o
point,
viscosity, mm /s
at 15 C (COC),
o
o
kg/l
min, C max, C at 40oC at 100oC
0.889
0.883
242
218
-24
-30
139.0
100.0
14.0
13.8
38
Performance Claims /
Approvals /
Recommendations
Description
Performance claims:
API CD
Dorman Diesels
GE Jenbacher
MAN
MDE
Mirrlees
Deutz
Perkins Engines
Ruston Diesels
Waukesha
Fincantieri Diesels
A mineral gas engine oil specifically developed
for use in high performance stationary gas
engines running on landfill, sewage or natural
gas with high sulphur content. It has a relatively
high alkalinity reserve, measured by TBN, for
combating acidic combustion products derived
from trace gas contaminants. It is compatible
with NSCR type of exhaust catalysts. For other
types of exhaust catalyst, it is recommended
that the user consults the catalyst
manufacturers for their limit on Zinc,
Phosphorus and Sulphated Ash level.
Performance claims:
API SG/CE
MAN 3271-1
DAF HP-Gas
Leyland
MB 226.9
MIL-L-2104E/46152D
Allison C-3
Caterpillar TO-2
Mack EO-K/2
Cummins NTC 400
Iveco
Volvo
A shear-stable multigrade gas engine oil. It is
developed for lubricating heavy duty sparkignited gas engines running on natural gas,
compressed natural gas (CNG) or liquefied
petroleum gas (LPG). It is primarily
recommended for automotive gas engines
used in transportation such as bus and truck
applications, also in diesel engines running on
low sulphur fuel or petrol. It provides piston
deposit control, wear protection, helps
extended oil drain intervals and reduces oil
consumption. When used in engines fitted with
exhaust catalyst, the user is advised to consult
the catalyst manufacturer for their
recommendations on zinc, phosphorus and ash
limits.
MARINE LUBRICANTS
Product
Kinematic
Density Flash point Pour
o
point,
(COC),
viscosity, mm2/s
at 15 C
o
o
kg/l
min, C max, C at 40oC at 100oC
Performance Claims /
Approvals /
Recommendations
Description
Marine Engine Oils
Performance claims:
ACEA E2-96
API CG-4
Daimler MB 228.1/229.1
MAN 271
Volvo VDS
®
URSA MARINE
SAE 15W-40
SAE 40
0.884
0.891
226
236
-39
-27
101.0
128.9
13.8
14.0
Recommended for many
OEMs. For details, please
contact our Area Sales
Manager.
DELO® 1000 MARINE
SAE 30
SAE 40
0.887
0.900
240
240
-18
-18
102.5
135.0
Performance claims:
API CF
11.7
14.2
39
Heavy duty diesel crankcase lubricants,
meeting the performance requirements for
marine diesel engines. It is recommended for
the lubrication of turbocharged and naturally
aspirated trunk piston marine diesels running
on gasoil. It is particularly intended for coastal
motorships, fishing vessels, harbor tugboats,
pilot boats and other inland waterways
vessels. It can be applied to propulsion and
auxiliary diesels.
A high performance medium alkaline diesel
engine oil for medium and high-speed trunk
piston diesel engines. It is developed for use
in a wide variety of trunk piston engines,
including the high output medium speed
engines using high sulphur gas oil or Marine
Diesel Oil with a maximum sulphur level of
1.5%. It is blended from high quality base oils
and selected additives which protect the oil
from oxidation and provide very good
detergent/dispersant properties.
MARINE LUBRICANTS
Product
Kinematic
Density Flash point Pour
o
point,
(COC),
viscosity, mm2/s
at 15 C
o
o
kg/l
min, C max, C at 40oC at 100oC
Performance Claims /
Approvals /
Recommendations
Approvals:
MB 228.2
MTU Type 2
DELO® SHP
SAE 40
0.890
240
-15
135.0
Performance claims:
ACEA E2-96
API CF, CD/SF
Deutz-MWM D5
Komatsu
Mack EO-K/2
Perkins (Shrewbury)
14.0
Meets the requirements of a
number of marine diesel
engine manufacturers. For
details, please contact our
Area Sales Manager.
®
TARO 20 DP
SAE 30
SAE 40
0.910
0.910
240
240
-18
-18
94.0
135.0
11.3
14.0
40
Description
Delo SHP is a heavy duty diesel crankcase
lubricant, meeting the performance
requirements for Super High Performance
Diesel engine oil (SHPD). Delo SHP is
manufactured from high quality base oils and
compounded with additives to provide
lubrication of heavy duty (turbocharged) highspeed diesel engines under severe operating
conditions. It contains detergent/dispersant,
anti-oxidation and anti-wear additives.
Medium alkaline diesel engine oil for medium
and high speed trunk piston diesel engines
burning low sulphur heavy fuels (with a
sulphur content up to 2%) or marine diesel oil
(MDO). It has very good viscosity control
when used in severe high temperature
service and its alkalinity retention
characteristics reduce corrosive wear over
long periods of operation.
MARINE LUBRICANTS
Product
Kinematic
Density Flash point Pour
o
point,
(COC),
viscosity, mm2/s
at 15 C
o
o
kg/l
min, C max, C at 40oC at 100oC
Meets the requirements of a
number of marine diesel
engine manufacturers. For
details, please contact our
Area Sales Manager.
®
TARO 30 DP
SAE 30
SAE 40
0.910
0.910
240
240
-18
-18
94.0
135.0
Performance Claims /
Approvals /
Recommendations
11.0
14.0
Performance claims:
API CF
®
TARO 40 XL
SAE 40
0.910
240
-18
135.0
Approved by a number of
marine diesel engine
manufacturers. For details,
please contact our Area
Sales Manager.
14.5
41
Description
High alkaline diesel engine oil for medium
and high speed trunk piston diesel engines
burning residual fuels with a maximum
sulphur level of 4%. It is blended from high
quality base oils and additives that help
protection against ring sticking, piston
deposits, and wear under severe operating
conditions.
It is a high alkaline diesel engine oil for
medium speed trunk piston diesel engines
burning residual fuels with a maximum
sulphur level of 4.5%. The dedicated
detergent and dispersant additive system
helps piston cleanliness as well as very good
heavy fuel related contaminants handling
characteristics. This results in reduction of
both “hot” (piston lands and grooves, piston
undercrown, purifier preheaters) and “cold”
(crankcase, cambox, rocker area, fuel
pumps, purifier bowl) deposits.
MARINE LUBRICANTS
Product
Kinematic
Density Flash point Pour
o
point,
(COC),
viscosity, mm2/s
at 15 C
o
o
kg/l
min, C max, C at 40oC at 100oC
Performance Claims /
Approvals /
Recommendations
Performance claims:
API CF
TARO® 50 XL
SAE 40
0.920
240
-15
135.0
Approved by a number of
marine diesel engine
manufacturers. For details,
please contact our Area
Sales Manager.
14.0
Approvals:
MAN B&W
Wartsila
Mitsubishi Heavy Industries
®
TARO SPECIAL HT 70
SAE 50
0.930
270
-15
230.0
20.0
42
Description
It is a high alkaline diesel engine oil for
medium speed trunk piston diesel engines
burning residual fuels with a maximum
sulphur level of 4.5%. The dedicated
detergent and dispersant additive system
helps piston cleanliness as well as very good
heavy fuel related contaminants handling
characteristics. This results in reduction of
both “hot” (piston lands and grooves, piston
undercrown, purifier preheaters) and “cold”
(crankcase, cambox, rocker area, fuel
pumps, purifier bowl) deposits.
This lubricant is particularly intended for
cylinder lubrication of crosshead engines,
operating at very high mechanical and
thermal loads reaching up to 160 bar in
maximum cylinder pressure and up to 270oC
in liner temperature at top dead center. It is
blended from highly refined, paraffinic base
oils and carefully selected additives to help
ring and liner wear protection and piston
cleanliness.
MARINE LUBRICANTS
Product
TARO® SPECIAL HT LS 40
SAE 50
VERITAS® 800 MARINE
SAE 20
SAE 30
Kinematic
Density Flash point Pour
o
point,
(COC),
viscosity, mm2/s
at 15 C
o
o
kg/l
min, C max, C at 40oC at 100oC
0.920
0.880
0.890
270
240
240
-15
-12
-12
230.0
68.0
111.0
20.0
8.5
11.9
43
Performance Claims /
Approvals /
Recommendations
Description
Approvals:
MAN Diesel
Wärtsilä
This is a 40 BN SAE 50 cylinder lubricant
intended for lubrication of cylinders of slowspeed engines using low sulphur fuel (<1.5 to
2 wt% sulphur) and operating at very high
mechanical and thermal loads reaching up to
160 bar in maximum cylinder pressure and up
to 270°C in liner temperature at top dead
center.
Performance claims:
Wärtsilä
MAN B&W
Mitsubishi
A crankcase lubricant for low speed
crosshead type diesel engines. It is
manufactured from highly refined lubricating
oil stocks and has very good anticorrosion
and antifoam properties. The oil has a
moderate level of alkalinity to neutralize acidic
combustion products that can enter the
crankcase. Special additives give the oil
detergent properties which help cleanliness of
crankcases. The combination of detergency
and the oxidation stability helps provide clean
piston interiors where oil is used for cooling.
MARINE LUBRICANTS
Product
Kinematic
Density Flash point Pour
o
point,
(COC),
viscosity, mm2/s
at 15 C
o
o
kg/l
min, C max, C at 40oC at 100oC
Performance Claims /
Approvals /
Recommendations
Description
Marine Gear Oils
PINNACLE® MARINE
GEAR
ISO VG 220
0.890
250
-45
220.0
Approvals:
Westfalia
Alfa-Laval
Rolls Royce Marine
Lohman-Stolterfoht
Ortlinghaus
22.7
Performance claims:
AGMA 250.04 (5EP)
US Steel 224
DIN 51517/3
44
A synthetic gear lubricant based on a mixture
of polyalphaolefins and diesters. It offers very
good oxidation stability at elevated
temperatures, help extended oil drain life and
wear protection. It is recommended for the
lubrication of plain and roller bearings and
open and closed gears at high temperatures.
It is suitable for application by bath, splash or
circulation systems and specially targeted for
the lubrication of purifier gears and reduction
gears.
CHAIN & CHAIN SAW LUBRICANTS
Product
Density Flash point Pour
Kinematic
o
2
point,
viscosity, mm /s
at 15 C (COC),
o
o
o
kg/l
min, C max, C at 40 C at 100oC
Performance Claims /
Approvals /
Recommendations
Description
Biodegradable Chain Saw Lubricants
®
BIOSTAR CHAIN BAR 80
0.923
306
-36
80.0
19.4
This product is specially developed to
overcome long term, potentially harmful effects
of petroleum based chain saw oils on the
ecological balance of the forests. It has a high
degree of biodegradability and exhibits low
toxicity values. It provides good anti-wear
characteristics assured by good adhesion to
surfaces. Tt is recommended for lubrication of
chain saws during summer and winter and is
suitable for use with various types of wood. It
can be used at a wide temperature range from 20°C up to 40°C.
39.5
This is a special lubricating and maintenance
oil for chains. Owing to its high adhesive power
and the high lubricity, less energy is lost in
friction, the chain is protected against rust and
wear is reduced. After the chain has been
cleaned and dried, the lubricant is sprayed
evenly and economically onto the chain. After a
reaction period of a few minutes, optimal
adhesion is reached.
Chain Lubricants
CHAIN LUBRICANT
ISO VG 680
0.906
236
-12
680.0
45
HYDRAULIC FLUIDS
Product
Density Flash point Pour
Kinematic
at
point,
(COC),
viscocity, mm2/s
o
o
15oC,
min, C max, C at 40oC at 100oC
Performance Claims /
Approvals /
Recommendations
Description
Industrial Hydraulic Fluids
DIN 51524-2 class HLP
ISO 6743-4 class L-HM
ISO 11158 HM
®
RANDO EP ASHLESS
ISO VG 32
ISO VG 46
ISO VG 68
0.870
0.880
0.881
216
230
238
-30
-30
-27
32.0
46.0
68.0
Approvals:
Vickers I-256-S
Cincinnati Milacron
P68/P69/P70
Krauss Maffei
Kunstoftechnik Hydraulic
Oil
5.3
6.9
8.7
DIN 51524, Part 2 HLP
SAE MS1004 MS
RANDO® HD
ISO VG 10
ISO VG 22
ISO VG 32
ISO VG 46
ISO VG 68
ISO VG 100
ISO VG 150
0.847
0.864
0.876
0.876
0.881
0.883
0.887
176
196
224
232
248
252
274
-27
-30
-36
-33
-33
-27
-30
10.0
22.0
32.0
46.0
68.0
100.0
150.0
Approvals:
Denison HF-0/HF-1/HF-2
2.8
4.3
5.4
6.8
8.5
11.4
14.8
Performance claims:
Cincinnati Milacron
P68/P69/P70
Sperry Vickers
M-2950-S/I-286-S
US Steel 136/137
Bosch Rexroth RE 90 220
46
Hydraulic oils designed for heavy duty
application and contain no zinc. They are
recommended for all kinds of hydraulic
equipment where anti-wear, extreme pressure
and anti-corrosion properties have to be
provided by the oil. This is required in cases of
high thermal stress. An advantage of ash-free
additives is that filterability properties of the oil
will be improved, especially if contamination by
water is expected. These oils have been used
successfully in plastic extruders.
A series of hydraulic oils based on solvent
refined base oils, blended with rust and
oxidation inhibitors. They contain foam
inhibitors and a special high stability anti-wear
additive. They are compatible with bronze and
steel components and all types of valves and
servos. Recommended for use in highperformance, heavy duty hydraulic systems,
including high speed/pressure vane and gear
pumps, and axial piston pumps. Also
recommended for machine tool lubrication
where an anti-wear type product is required.
Particularly suitable for common headstock/gearbox way-lubricant system.
HYDRAULIC FLUIDS
Product
Kinematic
Density Flash point Pour
at
point,
(COC),
viscocity, mm2/s
o
o
o
15 C,
min, C max, C at 40oC at 100oC
DIN 51524, Part 2 HLP
DIN 51524, Part 3 HVLP
SAE MS1004 MS
®
RANDO HD-Z
ISO VG 15
ISO VG 22
ISO VG 32
ISO VG 46
ISO VG 68
ISO VG 100
HYDRAULIC OIL AW
ISO VG 32
ISO VG 46
ISO VG 68
Performance Claims /
Approvals /
Recommendations
0.855
0.859
0.867
0.874
0.880
0.884
0.876
0.881
0.881
160
194
204
216
230
246
216
238
248
-57
-39
-42
-42
-39
-39
-24
-24
-24
15.0
22.0
32.0
46.0
68.0
100.0
32.0
46.0
68.0
3.9
5.0
6.5
8.2
11.0
14.0
Performance claims:
Cincinnati Milacron
P68/P69/P70
Sperry Vickers
M-2950-S/I-286-S
US Steel 136/137
Bosch Rexroth RE 90 220
5.3
6.8
8.6
DIN 51524-2 class HLP
ISO 6743-4 class L-HM
47
Description
An extension of the Rando HD series
incorporating a shear-stable viscosity index
improver additive. These grades exhibit all the
qualities of the HD series and in addition have
multigrade viscosity properties. They have
been specifically developed to meet the
industry needs for a high VI (viscosity index),
anti-wear hydraulic oil. These lubricants have a
wide operating temperature window (OTW),
even under high shear rate conditions.
Texaco Hydraulic Oils AW are universally
applicable hydraulic oils that can be used in a
broad range of light and average loaded
hydraulic installations where not more than DIN
51524 – 2 (HLP) is required. Texaco Hydraulic
Oils AW are based on solvent refined mineral
oils containing anti-corrosion, anti-oxidant, antifoam and Zn-based anti-wear additives.
HYDRAULIC FLUIDS
Product
Kinematic
Density Flash point Pour
at
point,
(COC),
viscocity, mm2/s
o
o
o
15 C,
min, C max, C at 40oC at 100oC
Performance Claims /
Approvals /
Recommendations
Description
Biodegradable Hydraulic Fluids
HYDRA®
ISO VG 46
0.922
255
-45
45.2
9.3
WHC 1
A biodegradable, zinc-free hydraulic oil based
on synthetic base stock. It is specifically
designed for applications where the possibility
of environmental contamination could occur. It
shows good viscosity/ temperature
characteristics, hence wide temperature range
application (-30oC up to 95oC) is possible. The
product is fully miscible with conventional
mineral oil based fluids.
Meets ISO 6743 (HFAS)
Meets ISO 12922 (HFAS)
th
Meets 7 Luxemburg Report
A high quality aqueous concentrate which
contains a mixture of efficient organic
inhibitors, a protective agent for copper alloys,
a dispersant-detergent agent and an antifoam
additive. It could be used either as a corrosion
protection fluid or as a fire-resistant fluid type
HFAS (S = Synthetic). The product provides a
high level of safety and reliability to the user. It
helps energy savings and is environmentally
acceptable.
Fire-resistant Hydraulic Fluids
SAFETY FLUID HFAS
1.061
-
-15
48
HYDRAULIC FLUIDS
Product
Kinematic
Density Flash point Pour
at
point,
(COC),
viscocity, mm2/s
o
o
o
15 C,
min, C max, C at 40oC at 100oC
®
GLYTEX HFC
ISO VG 46
SYNSTAR® HYDRAULIC
HFDU
ISO VG 46
1.074
o
at 20 C
0.924
-
320
-27
-30
47.0
45.3
9.5
49
Performance Claims /
Approvals /
Recommendations
Description
Approvals:
7th Luxembourg Report
(CHERCHAR - France)
Renault France (T843457)
A HFC fire resistant hydraulic fluid formulated
to provide a high level of safety and reliability
for the user. The high water content increases
the safety even in case of significant
evaporation. It is neutral to materials used in
hydraulic systems (such as steel, aluminum,
brass, rubber and plastic). It is recommended
for hydraulic systems operating close to hot
surfaces and flames and where a fire hazard
exists: mines, steel industry, forging, marine
and aviation.
Meets 7th Luxembourg
Report
HFDU type fire resistant fluid meeting the 7th
Luxembourg Report. The product is based on
synthetic esters and an anti-wear/antioxidant
package. It is recommended in hydraulic
systems operating close to hot surfaces and
flames and where a fire hazard exists in case
of a leak of the pressurized hydraulic fluid.
PNEUMATIC TOOL LUBRICANTS
Product
ARIES®
ISO VG 32
ISO VG 100
Kinematic
Density
Pour
Flash
2
o
viscosity, mm /s
at 15 C point, min, point,
o
o
kg/l
C
max, C at 40oC at 100oC
0.908
0.886
165
220
-27
-24
31.0
105.0
Performance Claims /
Approvals /
Recommendations
Description
Specially formulated products for the
lubrication of percussion-type air tools.
Additives are used to impart tackiness, antifogging and anti-foaming properties.
Recommended for percussion-type air tools,
including rock drill, paving breakers, pneumatic
pile drivers, jack hammers, etc. used in the
mining and construction industries. They are
also recommended for industrial plain and antifriction bearings.
5.3
10.2
50
INDUSTRIAL GEAR OILS
Product
Kinematic
Density Flash point Pour
2
o
point,
viscosity, mm /s
at 15 C (COC),
o
o
kg/l
min, C max, C at 40oC at 100oC
Performance Claims /
Approvals /
Recommendations
Description
Mineral Gear Oils
MEROPA®
ISO VG 68
ISO VG 100
ISO VG 150
ISO VG 220
ISO VG 320
ISO VG 460
ISO VG 680
ISO VG 1000
ISO VG 1700
0.881
0.897
0.891
0.895
0.899
0.903
0.920
0.934
0.898
225
228
230
240
242
246
250
254
260
-30
-27
-24
-21
-21
-15
-15
-15
-15
68.0
100.0
150.0
220.0
320.0
460.0
680.0
1000.0
1700.0
8.5
11.2
14.5
19.0
24.0
32.0
37.0
45.5
79.7
Performance claims:
DIN 51517/3
AGMA 250.04
US Steel 224
Textron Power Transmission
Cincinnati Milacron
51
Gear lubricants blended from high quality base
stocks and an effective sulphur-phosphorus EP
additive package designed to reduce wear of
enclosed gears and other equipment operated
under heavy loads and shock conditions. They
are inhibited to provide good foam resistance
and water separating characteristics which
make them well suited for circulating systems
where water contamination is a hazard. They
are non-corrosive to gear and bearing
materials such as steel, copper, bronze, babbitt
or cadmium-nickel. Typical applications include
enclosed gear system, chain drives, sprockets,
plain and anti-friction bearings, slide guides,
and flexible couplings.
INDUSTRIAL GEAR OILS
Product
MEROPA® BM
ISO VG 680
ISO VG 1000
ISO VG 1700
MEROPA® WM
ISO VG 320
Kinematic
Density Flash point Pour
2
o
point,
viscosity, mm /s
at 15 C (COC),
o
o
kg/l
min, C max, C at 40oC at 100oC
0.920
0.928
0.924
0.895
262
250
238
250
-12
-12
-15
-18
680.0
1000.0
1700.0
320.0
37.0
45.0
62.0
24.4
52
Performance Claims /
Approvals /
Recommendations
Description
Performance claims:
DIN 51517/3
DIN 51502 type CLP F
Gear lubricants blended from high quality base
stocks, an effective sulfur-phosphorus EP
additive package and molybdenum disulphide.
They are designed to help reducing wear of
enclosed gears and other equipment operated
under heavy loads and shock conditions. They
are inhibited to provide good foam resistance
and are non-corrosive to gear and bearing
materials such as steel, copper, bronze, babbitt
or cadmium-nickel. Good oxidative and thermal
stability to provide long service life.
Performance claims:
US Steel 224
AGMA 9005-E02
David Brown ET 33/80
DIN 51517/3
Cincinnati Milacron
Flender
Valmet
This oil series has been specially designed to
provide a high micro pitting protection. They
are blended from selected high quality base
stocks and an advanced and effective sulphurphosphorus EP additive package designed to
reduce wear of enclosed gears and other
equipment operated under heavy loads and
shock conditions. It surpasses the loadstage 10
in the FZG micro pitting test (FVA.54/I-IV) and
is therefore classified as GFT-High.
INDUSTRIAL GEAR OILS
Product
Kinematic
Density Flash point Pour
2
o
point,
viscosity, mm /s
at 15 C (COC),
o
o
kg/l
min, C max, C at 40oC at 100oC
Performance Claims /
Approvals /
Recommendations
Description
Synthetic Gear Oils
PINNACLE® EP
ISO VG 150
ISO VG 220
ISO VG 320
ISO VG 460
Approvals:
David Brown (Type H)
0.850
0.853
0.855
0.856
244
234
240
246
-48
-48
-42
-39
150.0
220.0
320.0
460.0
18.8
26.1
35.2
46.5
Performance claims:
DIN 51517/3
AGMA 250.04/251.02
US Steel 224
Approvals:
Bosch Rexroth
Moventas
Arburg
PINNACLE® WM
ISO VG 320
0.856
240
-48
320.0
Performance claims:
US Steel 224
AGMA 9005-E02
David Brown ET 33/80
DIN 51517/3
Cincinnati Milacron
Valmet
35.4
53
Synthetic lubricants suitable for a wide range of
gear applications involving mobile and
industrial equipment. These oils are especially
recommended for equipment operated under
adverse conditions where short service life with
conventional lubricants can be expected.
Typical uses include enclosed gear cases,
speed reducers, plain and anti-friction
bearings, flexible couplings, chain drives and
sprockets. They may be applied by bath
splash, circulating and spray lubrication
systems. These oils are fully compatible with
mineral oils that might be left over in the
system.
Synthetic based gear lubricants designed for
use in equipment operated under adverse
conditions of heavy load or shock loading,
elevated temperatures or water contamination.
They have been specially designed to provide
a high micro pitting protection. They are
recommended for a variety of gears on mobile
contractor type equipment, open pit and
underground mining equipment, cement mills,
ball mills, rolling mills, crushers, shakers,
hoists, conveyors, kilns, winches, machine
tools, skip lines and marine equipment.
INDUSTRIAL GEAR OILS
Product
SYNLUBE® WS
ISO VG 150
ISO VG 220
ISO VG 320
ISO VG 460
ISO VG 680
ISO VG 1000
Kinematic
Density Flash point Pour
2
o
point,
viscosity, mm /s
at 15 C (COC),
o
o
kg/l
min, C max, C at 40oC at 100oC
1.057
1.062
1.062
1.067
1.072
1.089
284
284
282
284
287
296
-45
-42
-39
-36
-33
-30
150.0
220.0
320.0
460.0
680.0
1000.0
25.0
42.0
61.0
83.0
122.0
175.0
Performance Claims /
Approvals /
Recommendations
Approvals:
Flender
Performance claims:
DIN 51 517/3
54
Description
A family of synthetic industrial gear lubricants
showing continous performance under
demanding operating conditions. They are
based on water soluble polyalkylene glycols,
thus helping micro pitting protection and EP
performance. Furthermore, the product shows
thermal stability and good corrosion protection.
They are NOT miscible with mineral oils and
should preferably not be mixed with other
polyglycol based lubricants in order to preserve
the designed properties of Synlube WS.
CIRCULATING OILS
Product
Density
o
at 15 C
kg/l
Flash
point,
o
min, C
Kinematic
Pour
2
point,
viscosity, mm /s
o
max, C at 40oC at 100oC
®
HONOR ASHLESS AW
ISO VG 150
HONOR® AW
ISO VG 220
0.890
0.897
240
260
-12
-9
150.0
220.0
19.0
55
Performance Claims /
Approvals /
Recommendations
Description
Performance claims:
Morgan Lubrication
Spec.Rev 1.0
Danieli St. 0.000.002
These lubricants are formulated from selected
high VI base oils combined with a high quality
additive package which is metal free and
provides good wear protection, rust inhibition
and water separation properties. These are
circulating oils specifically designed for the
lubrication of ferrous and non-ferrous Morgan
no-twist mills and Morgoil back up-roll
bearings. Other applications include general
lubrication of gears and bearings. The metalfree additive package limits staining on the
steel plates.
Performance claims:
Morgan Lubrication
Spec.Rev 1.0
Danieli St. 0.000.002
A circulating oil for application in the steel mill
industry. This lubricant is formulated from
selected high VI base oils combined with high
quality additives which are metal free and
provide rust inhibition and good wear protection
and water separation properties. It does not
cause corrosion of steel, copper, bronze,
babbitt, or cadmium nickel bearing metals at
typical operating temperatures.
CIRCULATING OILS
Product
Density
o
at 15 C
kg/l
Flash
point,
o
min, C
Kinematic
Pour
2
point,
viscosity, mm /s
o
max, C at 40oC at 100oC
Performance Claims /
Approvals /
Recommendations
A range of solvent refined paraffinic mineral
oils which have high viscosity indices, low pour
points and low carbon forming tendencies.
They are recommended for use in some
stationary diesel engines, gas and dual fuel
engines and reciprocating air compressors
where non detergent, low deposit crankcase
oils are required. They do not contain ash
forming additives. They are also suitable for
use as general machine lubrications, quench
oils and process oils.
®
OMNIS
ISO VG 22
ISO VG 32
ISO VG 68
ISO VG 100
ISO VG 150
ISO VG 220
ISO VG 460
PAPER MACHINE OIL XL
ISO VG 150
ISO VG 220
0.861
0.853
0.880
0.884
0.887
0.898
0.905
0.883
0.886
220
220
242
260
266
268
300
256
272
-20
-20
-20
-21
-20
-18
-10
-9
-9
20.0
32.0
67.4
102.0
153.0
220.0
460.0
150
220
Description
4.0
5.4
8.7
10.7
14.4
19.0
30.4
Performance claims:
FAG
SKF
15.1
18.2
56
A series of specially formulated metal-free antiwear circulating oils for use in paper machine
lubrication systems. Designed for circulating
systems benefiting from effective anti-wear/EP
protection and oxidation performance.
WAY LUBRICANTS
Product
WAY LUBRICANT X
ISO VG 68
ISO VG 220
ISO VG 320
Kinematic
Density Flash point Pour
2
o
point,
viscosity, mm /s
at 15 C (COC),
o
o
kg/l
min, C max, C at 40oC at 100oC
0.879
0.892
0.895
229
241
242
-33
-27
-24
68.0
220.0
320.0
Performance Claims /
Approvals /
Recommendations
Performance claims:
DIN 51524, Part 2
Cincinnati Milacron P47/P50
General Motors LS-2
SKC
9.8
19.7
24.3
57
Description
A series of lubricants, especially designed for
the lubrication of slideways in metal processing
machines. They are chlorine-free, which make
them more environmentally acceptable. They
have a static friction coefficient which is lower
than the kinematic friction coefficient, which will
prevent stick-slip effect on the slideways. They
are not easily washed away by emusifiable
cutting fluids. These oils show wetting and
sticking properties, which enhance the build up
of a thick oil film and which prevent the
lubricant from dripping off, even from vertical
surfaces.
TURBINE OILS
Product
REGAL® PREMIUM EP
ISO VG 32
ISO VG 46
ISO VG 68
Kinematic
Density Flash point Pour
2
o
point,
viscosity, mm /s
at 15 C (COC),
o
o
kg/l
min, C max, C at 40oC at 100oC
0.859
0.863
0.871
220
226
248
-15
-15
-12
32.0
46.0
68.0
Performance Claims /
Approvals /
Recommendations
Performance claims:
DIN 51515/T1 L-TD/L-TG
ISO 8086 L-TSE/L-TGE
BS 489
GEC Alstom NBA
P50001A/P50003A
GEK
Fiat Avio
Laborelec
KEMA
Atlas Copco 790.21.2E
Solar
ABB Stal 812101-09
MAN Turbo TQL-T2
5.5
5.5
8.3
Approvals:
Siemens TLV 9013 04
Alstom HTGD 90117U
Skoda Power Tp00100P
58
Description
A high temperature resistant gas turbine oil
which can also be applied in steam turbines.
For this reason it is a recommended lubricant
in combined cycle units lubricated with one
system. The all-round properties of Regal
Premium EP make it suitable for the lubrication
of a wide range of equipment associated with
the turbines for which it is recommended.
Typical applications include air compressors,
bath and circulating systems supplying
bearings, lightly to moderately loaded gear
sets, pumps, electric motors and low to
moderate pressure hydraulic systems. It is
NOT recommended for aviation gas turbines in
either aircraft or non-aviation service.
TURBINE OILS
Product
REGAL® EP
ISO VG 100
ISO VG 150
ISO VG 220
ISO VG 320
REGAL® SGT 22
Kinematic
Density Flash point Pour
2
o
point,
viscosity, mm /s
at 15 C (COC),
o
o
kg/l
min, C max, C at 40oC at 100oC
0.883
0.886
0.893
0.890
0.995
260
260
276
270
280
-18
-12
-12
-12
-62
100.0
150.0
220.0
320.0
25.6
Performance Claims /
Approvals /
Recommendations
Performance claims:
DIN 51515/T1 L-TD
ISO 6743/5
BS 489
10.9
14.6
18.7
23.4
Approvals:
MIL-PRF-23699F Class STD
GE D50 TF1 (ML engines)
Rolls Royce (Allison)
EMS 53 (501 & T56)
Rolls Royce (Derby)
RB 211
Avon
Olympus
Tyne
Spey
5.1
59
Description
A family of turbine oils which provide oxidation
stability, anti-corrosion and anti-wear
properties. They have good resistance to
sludge formation, water separating
characteristics, foam resistance and air-release
properties, together with low temperature
performance. They are recommended for use
in the lubrication systems of mineral oil
lubricated steam and hydraulic turbines
operating under various service conditions, and
for gas turbines in moderate service where
high ambient temperatures are not present in
the bearing housings. They are NOT
recommended for aviation gas turbines in
either aircraft or non-aviation service.
An advanced stationary gas turbine oil based
on a blend of specially designed polyolesters
and additives. It provides an improved thermal
and oxidation stability under severe operating
conditions, low carbon deposit and sludge
forming tendencies, rust and corrosion
protection, rapidly releases entrained air. It is
recommended for aeroderivative gas turbines
exposed to severe operating environment in
non-aviation applications such as industrial
power generation, gas transmission and
marine propulsion.
AIR & GAS COMPRESSOR OILS
Product
Kinematic
Density Flash point Pour
2
o
point,
viscosity, mm /s
at 15 C (COC),
o
o
kg/l
min, C max, C at 40oC at 100oC
Performance Claims /
Approvals /
Recommendations
Description
Performance claims:
DIN 51506 VD-L
Teikoku Machinery Air
compressors
Tanabe Reciprocating type
compressors
Sperre Reciprocating type
compressors
Hatlapa V-Line piston
compressors
Hamworthy vertical
compressors
They are blended with selected high quality
paraffinic base oils. A well formulated additive
package provides oxidation resistance,
corrosion protection and EP characteristics.
Very little deposit on pistons and valves is
produced, even at high temperatures, thus
reducing the risk of fire and explosion in
compressors. This line of compressor oils has
characteristics required to provide a smooth,
economical compressor operation especially
under severe conditions.
Air Compressor Oils
COMPRESSOR OIL
EP VD-L
ISO VG 46
ISO VG 68
ISO VG 100
ISO VG 150
CETUS® PAO
ISO VG 46
ISO VG 68
0.879
0.885
0.889
0.894
234
244
248
286
-24
-18
-12
-12
46.0
68.0
100.0
150.0
6.8
8.9
11.3
14.9
Approvals:
Tanabe
ABB
0.842
0.845
232
240
-57
-57
46.0
68.0
8.1
10.3
Performance claims:
Atlas Copco ECB 573
DIN 51506 VD-L
60
Synthetic compressor oils based on
polyalphaolefins and an advanced additive
package. It is recommended for lubrication of
rotary screw compressors. Additionally, it is
recommended for other types of compressors,
like single and multistage reciprocating
compressors, and single and multistage
centrifugal compressors where an ISO 46
viscosity grade is required. It is specifically
suited for the lubrication of turbochargers in
marine diesel engines.
AIR & GAS COMPRESSOR OILS
Product
CETUS® DE
ISO VG 100
CETUS® S
ISO VG 46
Kinematic
Density Flash point Pour
2
o
point,
viscosity, mm /s
at 15 C (COC),
o
o
kg/l
min, C max, C at 40oC at 100oC
0.962
0.850
252
252
-39
-30
96.6
46.0
10.2
6.9
61
Performance Claims /
Approvals /
Recommendations
Description
Performance claims:
Compair
Hamworthy
Matsubara
Sperre
Tanabe (Type H)
Specifically designed for lubrication of
reciprocating compressors operating at high
discharge temperatures and discharge
pressures. It is a fully synthetic lubricant based
on diester technology. It provides an extended
drain interval, reduced oil consumption and
lower maintenance costs. It may not be
compatible with some zinc plated components
(including galvanized), seals, paints, plastics,
etc. found in systems designed for petroleum
oils. When there is any doubt regarding the
compatibility of system components with these
diester based lubricants, the equipment
manufacturer should be consulted.
Performance claims:
DIN 51506 VD-L
A semi-synthetic compressor oil, blended with
selected oxidation stable base oils. It has been
specifically developed for screw compressors,
operating at moderate discharge temperatures
(< 100oC) and discharge pressures (< 15 bar).
This product allows extended drain intervals.
AIR & GAS COMPRESSOR OILS
Product
Kinematic
Density Flash point Pour
2
o
point,
viscosity, mm /s
at 15 C (COC),
o
o
kg/l
min, C max, C at 40oC at 100oC
Performance Claims /
Approvals /
Recommendations
Description
Gas Compressor Oils
LPG COMPRESSOR OIL
1.055
260
-30
185.0
Approvals:
Sulzer Burckhardt A.G.
(K-type)
Howden Compressors Ltd
35.0
Performance claims:
Linde
62
A fully synthetic oil, polyalkylene glycol based,
for the lubrication of hydrocarbon and chemical
gases compressor units. It is used for the
following gases:
1. liquefied petroleum gases - propane and
butane
2. liquefied natural gases - methane and
ethane
3. hydrocarbon chemical gases - ethylene,
propylene and butylene
4. chemical gases - vinylchloride, ammonia,
butadiene
It is particularly suitable for marine service on
vessels carrying specialist liquefied gas
cargoes. It should not be mixed with mineral
oils.
REFRIGERATION COMPRESSOR OILS
Product
Kinematic
Density Flash point Pour
o
point,
(COC),
viscosity, mm2/s
at 15 C
o
o
kg/l
min, C max, C at 40oC at 100oC
Performance Claims /
Approvals /
Recommendations
DIN 51503
BS 2626/1992, type A
CAPELLA® WF
ISO VG 32
ISO VG 46
ISO VG 68
CAPELLA® PREMIUM
ISO VG 68
0.906
0.910
0.915
0.859
178
188
198
260
-45
-39
-36
-42
30.0
43.8
68.0
68.0
Approvals:
Sulzer, Bitzer, Tecumsec,
Carrier, York, Sabroe, J&E
Hall
4.4
5.4
6.7
Performance claims:
Tecumsec, Belgium Daikin,
Robert Bosch (G), Heinrich
Huppman (G), Dorin (I),
Matsushita (J), Trane, DWM
Copeland (US), Kelvinator
Inc (US)
9.2
DIN 51 503 Part 1 KA group
63
Description
A line of oils for the lubrication of compressors
used in refrigeration and air-conditioning
systems. They are manufactured from specially
refined and processed naphthenic pale oils, to
meet the requirements of many refrigeration
equipment manufacturers. They have low freon
floc temperatures and pour points. They do not
'wax-out' under the low temperature conditions
typically encountered in modern refrigeration
systems. These oils are suitable for
refrigeration units using fluorinated
hydrocarbon refrigerants (such as R12, R22,
R502...) and ammonia.
Oil that is specially designed for the lubrication
of ammonia refrigeration compressors. This is
a semi-synthetic oil containing an additive
package to provide resistance to deposits and
rust. It has a resistance to oxidation in the
presence of ammonia, leaving the circuits
clean and free from sludge. The lower volatility
versus conventional mineral oils limits the oil
consumption. The lower carry over of oil
beyond the evaporator avoid tube coating
cutting down the efficiency. It is NOT
recommended for refrigeration systems using
halogenated refrigerants (freons).
REFRIGERATION COMPRESSOR OILS
Product
CAPELLA® A
ISO VG 68
CAPELLA® HFC
ISO VG 32
ISO VG 55
ISO VG 100
Kinematic
Density Flash point Pour
o
point,
(COC),
viscosity, mm2/s
at 15 C
o
o
kg/l
min, C max, C at 40oC at 100oC
0.836
1.005
1.011
1.000
260
240
270
275
-57
-48
-39
-39
68.7
32.0
53.0
100.0
10.6
5.7
8.4
11.1
64
Performance Claims /
Approvals /
Recommendations
Description
Performance claims:
DIN 51.503
BS 2626/1992
ABB Stal Refrigeration AB
Sabroe
Broedrene Gram
Fully synthetic oil for the lubrication of
ammonia refrigeration compressors. It does not
contain additives. It is recommended for use in
refrigeration and air-conditioning systems
requiring lubricant with low-temperature
performance: minimum evaporator
temperatures of -60oC. They are particularly
suitable for reciprocating and screw
compressors operating at discharge
temperatures exceeding 100oC.
Performance claims:
Bitzer
Bock
Carrier
Danfoss
Dorin
Electrolux
Embraca/Aspera
Frigopol
Gram
Grasso
Maneurop
Sabroe
ABB Stahl
Sulzer
Based on polyolesters, they provide thermal
and chemical stability in presence of the
environmentally safe hydrofluorocarbon (HFC)
refrigerants, especially R134a, R404a, R507...
These oils have undergone numerous
compressor tests and demonstrated improved
compressor cleanliness as well as complete
absence of copper transfer. They are
especially suited for the first-fill and retrofit
lubrication of refrigeration compressors in large
food retails, industrial systems, air conditioning
and heat pump equipment and cooling systems
in the transport sector.
REFRIGERATION COMPRESSOR OILS
Product
REFRIGERATION LOW
TEMP
ISO VG 68
Kinematic
Density Flash point Pour
o
point,
(COC),
viscosity, mm2/s
at 15 C
o
o
kg/l
min, C max, C at 40oC at 100oC
0.870
190
-42
Performance Claims /
Approvals /
Recommendations
Performance claims:
Sabroe
Bock
Bitzer
Carrier
Thermoking
Dorin
Danfoss
Necchi/ ERC
Howden
68.0
65
Description
Fully synthetic oil for the lubrication of
compressors used in R22 and R502
refrigeration systems, operating at low
evaporator temperatures: -35oC (R22) and o
25 C (R502). It does not contain additives, but
it is very stable towards chlorofluoromethane
type refrigerant gases and iron casting. They
are NOT suitable for use in AMMONIA
refrigerating installations.
INSULATING OILS
Product
Density
o
at 20 C
kg/l
Flash
point,
o
min, C
Kinematic
Pour
2
point,
viscosity, mm /s
o
max, C at 20oC at 40oC
Performance Claims /
Approvals /
Recommendations
Description
DIN 57370
VDE 0370 Part 1, Class A
IEC 296 (1982), Class 1&2
Siemens TUN 901293
A mineral-base insulating oil designed for use
as transformer, transducer, and switchgear oil
and in similar equipment, also at low
temperatures in outdoor use. It is an inhibited,
low-viscosity lubricant manufactured from a
naphthenic base oil. The pre-dried product has
a breakdown voltage greater than 60 kV. Main
benefits of this oil are its high dielectric
strength and high oxidation stability, ensuring a
long service life of the oil charge, as well as its
neutral behaviour towards insulating material.
Transformer Oils
TRANSFORMER OIL
INHIBITED
0.875
140
-45
19.0
8.9
Laborelec
TRANSFORMER OIL
GK-2
0.867
155
-54
Performance claims:
IEC 60296 (2003)
BS 148 (1997)
ASTM D3487 Type I
NBN C27-101 (1985)
NF C27-101 (1982)
DIN 57370 (VDE 0370)
9.6
66
A mineral-base insulating oil designed for use
as transformer, transducer, and switchgear oil
and in similar equipment, also at low
temperatures in outdoor use. It is a noninhibited, low-viscosity lubricant manufactured
from a naphthenic base oil. The pre-dried
product has a breakdown voltage greater than
70 kV (after treatment). Main benefits of this oil
are its high dielectric strength and high
oxidation stability, ensuring a long service life
of the oil charge, as well as its neutral
behaviour towards insulating material.
INSULATING OILS
Product
Density
o
at 20 C
kg/l
Flash
point,
o
min, C
Kinematic
Pour
2
point,
viscosity, mm /s
o
max, C at 20oC at 40oC
Performance Claims /
Approvals /
Recommendations
Description
Electrical Discharge Machining fluids
EDM FLUID
ISO VG 2
ISO VG 5
0.817
0.832
104
128
-30
-6
3.6
5.9
Performance claims:
Charmilles Corporation of
America
Cincinatti Milling Machine
Company
Easco Products
Excello Corporation
Ingersol Milling Machine
Company
2.4
3.7
67
High-flash point, low viscosity, low odour
products that meet the requirements for high
grade electrical discharge machining fluids.
They offer high flash point, minimum
evaporation loss, long life time of electrode and
fluid. EDM Fluid 5 is recommended for rough
finishing operations or shaping operations and
EDM Fluid 2 is suitable for the finest cut
operations.
PROCESS OILS
Product
Kinematic
Density Flash point Pour
2
o
point,
viscosity, mm /s
at 15 C (COC),
o
o
kg/l
min, C max, C at 40oC at 100oC
Performance Claims /
Approvals /
Recommendations
Description
Paraffinic and Naphtenic Oils
TEXNAP®
9
13
22
TEXPAR®
5
12
22
100
460
0.888
0.895
0.901
0.815
0.849
0.860
0.882
0.902
146
150
178
119
162
170
233
250
-57
-42
-42
-12
-12
-15
-12
-3
9.0
13.0
22.0
5.6
11.6
19.6
104.0
473.0
These oils are solvent refined and
hydrofinished naphthenic distillate oils. They
are characterized by low pour points, good
solvency properties and oxidation stability.
They are widely used as extenders/softeners
for rubbers and plastics, for the manufacturing
of printing ink, as leather tanning agents, for
the manufacturing of shoe polish, as carrier for
soluble oils, as textile conditioner, as dust
binding for ores.
2.3
2.7
3.7
These oils are solvent-extracted and dewaxed
paraffinic mineral oils manufactured by
hydrofinishing treatment. They provide low
volatility, low aromaticity, and non-staining
properties. They show good low temperature
characteristics with color stability and oxidation
resistance. They are widely used for the
manufacturing of printing ink, as carrier for
soluble oils, as extenders/softeners for rubbers,
plastics, as carrier for lubricant additives, as
anti-dust oil for fertilizers and explosives, as
leather impregnating oil, as adjuvants in
herbicides.
1.6
2.9
4.1
11.5
30.8
68
PROCESS OILS
Product
Kinematic
Density Flash point Pour
2
o
point,
(COC),
viscosity, mm /s
at 15 C
o
o
kg/l
min, C max, C at 20oC at 40oC
Performance Claims /
Approvals /
Recommendations
Description
White Oils
WHITE OIL
PHARMACEUTICAL
30
40
70
120
240
WHITE OIL
TECHNICAL 40
0.847
0.865
0.852
0.864
0.868
0.865
156
182
215
190
265
166
-12
-12
-9
-15
-9
-18
32.0
38.0
60-75
115.0
215.0
40.0
14.4
16.5
24.0
40.0
70.0
17.0
69
Meet the requirements of:
German pharmacopoeia
European pharmacopoeia
British pharmacopoeia
US pharmacopoeia
FDA 21 CFR 178.3620
FDA 21 CFR 172.878
These are colourless, clear, oily, odorless, nonfluorescent liquids. The different levels of
viscosity have been carefully planned to permit
a wide range of uses. They are of particular
value in the following applications:
pharmaceuticals and cosmetics, food,
chemicals, lubricants, industrial applications rubber, plastics, paper, ropes, textiles,
agriculture and precision machinery.
Meet the requirements of:
FDA 178 3620 b/c
White Oils Technical are transparent to lightyellow, largely colorless mineral oils. They
exhibit a high degree of purity and excellent
color stability and resistance to aging. The
product complies with the purity standards of
the U.S. Food and Drug Administration (FDA
178 3620 b/c).
HEAT TRANSFER FLUIDS
Product
TEXATHERM®
ISO VG 32
ISO VG 46
Kinematic
Density Flash point Pour
2
o
point,
viscosity, mm /s
at 15 C (COC),
o
o
kg/l
min, C max, C at 40oC at 100oC
0.857
0.860
220
235
-21
-15
32.0
46.0
Performance Claims /
Approvals /
Recommendations
Performance claims:
DIN 51522-Q
5.4
6.9
70
Description
These are heat transfer fluids formulated to
meet the stringent requirements of hot
circulating systems operating at temperatures
of up to 320°C. They exhibit very good thermal
and oxidation stability. Their high thermal
conductivity and low viscosity at the relevant
operating temperatures will help high heat
transfer rates with limited pumping energy.
They are used in industries such as those
processing asphalt, soap, plastics, waxes,
paper, fibre boards and many specialities,
where close temperature control is needed
during manufacturing or processing. Also, they
have low toxicity and are suitable for use in
heat transfer systems of food, feed and drink
plants, although without formal NSF H1
approval.
HEAT TRANSFER FLUIDS
Product
TEXATHERM® HT
ISO VG 22
Kinematic
Density Flash point Pour
2
o
point,
viscosity, mm /s
at 15 C (COC),
o
o
kg/l
min, C max, C at 40oC at 100oC
0.915
205
-50
18.7
3.4
®
TEXATHERM U
ISO VG 32
0.869
195
-9
32.0
5.3
71
Performance Claims /
Approvals /
Recommendations
Description
Performance claims:
DIN 51522-Q
A heat transfer medium suitable for operation
over a wide temperature range between -50
and 320°C. Owing to its synthetic nature, it
exhibits high thermal and oxidative stability. It
facilitates plant start-up even at ambient
temperatures below 0°C. The low pour point is
particularly advantageous in such plants where
pipes and expansion tanks are installed
outdoors. It is used for indirect heat transfer in
closed systems operating, for example, in the
chemical industry, leather industry (shoe
factories), textile industry, rubber industry,
building materials industry, chipboard
manufacturing plants, in laundries, food and
fodder industries.
Performance claims:
DIN 51522-Q
This oil is used for indirect heat transfer in
closed systems up to 300oC. It exhibits high
thermal and oxidative stability. It can be easily
pumped through the circulation system
because of its favorable viscosity grade.
Energy consumption is therefore kept low.
Keeps system clean in a long period.
RUST PREVENTIVE OILS
Product
METAL PROTECTIVE
OIL L
RUSTPROOF
COMPOUND L
RUSTPROOF OIL 944D
Density
o
at 15 C
kg/l
0.899
0.901
0.836
Flash
point,
o
min, C
140
52
40
Kinematic
Pour
2
point,
viscosity, mm /s
o
max, C at 40oC at 100oC
-15
Performance Claims /
Approvals /
Recommendations
Description
18.0
A mineral oil based rust preventive oil,
additivated with specially selected inhibitors,
which protect steel during storage against rust
and corrosion. The oil covers metallic surfaces
with a thin, tight film. The formation of colored
rings on steel plates, which have been stacked
or rolled up in a storage room for a long period
of time is avoided. It does not contain any
solvent, but it can be diluted up to 10% to make
it more fluid. It should never be applied on dirty
and wet surfaces.
approximately
NLGI 2
Very viscous rust preventive product based on
wax. On the surface it leaves a strong water
resistant film. It is not neccesary to clean
surface before applying it. For easier applying,
it is recommended to dilute it with solvent. It
protects up to 3 years in open, and under cover
substantially longer.
3.0
A low viscous water-displacing fluid, providing
an oily film, which ensures corrosion protection
to pieces that have undergone a humid
treatment. It is economic in use, owing to its
high surface covering power. It permits the
user to apply the product by immersion, spraygun or brush, thereby obtaining efficiency
ratings of 50-55 m2/kg product. It can be easily
washed off by any conventional degreasing
method.
72
RUST PREVENTIVE OILS
Product
RUSTPROOF OIL 960
Density
o
at 15 C
kg/l
0.800
Flash
point,
o
min, C
40
Kinematic
Pour
2
point,
viscosity, mm /s
o
max, C at 40oC at 100oC
Performance Claims /
Approvals /
Recommendations
Description
A low viscous water-displacing barium free
fluid, providing an oily film, which ensures
corrosion protection to pieces that have
undergone a humid treatment. It expels water
from metallic surfaces, thereby yielding a thin
oily film. It looses dirt, rust, etc., due to its
penetrating power and can be used to clean
fire arms. It contains white spirit type solvent,
but does not contain benzene or chlorinated
solvents.
2.4-3
73
GREASES
Product
Quality level
Operating Thickener
o
type
temp., C
Dropping
point,
o
C
Performance Claims /
Approvals /
Recommendations
Description
Lithium (Li) based greases
MULTIFAK® EP
NLGI 0
NLGI 1
NLGI 2
MULTIFAK® EP
NLGI 000
ISO-L-XCCEB 0/1/2
DIN KP 0/1/2 K-30
ISO-L-XCCEB 000
DIN GP 000 K-30
*in short periods/with re-lubrication
-30 up to
120
(140)*
-30 up to
120
(140)*
Li
Li
180
>160
74
Approvals:
MAN 283 (NLGI 2)
MB 267 (NLGI 2)
Multipurpose EP grease containing highly
refined mineral base oils, lithium thickener,
EP additives and rust and oxidation
inhibitors. Also suitable as a multipurpose
automotive grease for general purpose
applications. They are non-corrosive to
nonferrous bearing metals as well as steel,
they are very shear stable, protect against
rust and resist water washing. They can
resist heavy, continuous and shock loads,
high speeds.
Approvals:
Mecafluid
Manual Pump PG 14
Automatic Pump
PGA+GRG
Distributors
IDR+IDG+IT
Semi fluid high quality multipurpose greases
containing anti-oxidants, anti-corrosion, antiwear and EP additives. They are very shear
stable, retain their original consistency while
working, protect against rust and resist water
washing. Recommended for use as
multipurpose chassis lubricant in centralised
lubricating systems under adverse conditions
- high and low temperatures, heavy,
continuous and shock loads, high speeds.
They are also suitable for large rolling
element bearings in mining, construction,
and marine equipment operating under
adverse conditions.
GREASES
Product
MULTIFAK® T EP
NLGI 2
MULTIFAK® PREMIUM
NLGI 3
MULTIFAK® 264 EP
NLGI 00/000
Quality level
ISO-L-XBCEB 2
DIN KP 2 K-20
ISO-L-XCCEA 3
DIN K 3 K-30
ISO-L-XEBEB00/000
DIN GP 00/000 K-50
*in short periods/with re-lubrication
Operating Thickener
o
type
temp., C
-20 up to
130
(150)*
-30 up to
140
-50 up to
120
Li
Li
Li
Dropping
point,
o
C
Performance Claims /
Approvals /
Recommendations
Description
190
A quality multipurpose lithium EP grease on
a semi-synthetic base (mineral oil+polymer)
for lubrication of cars, industrial and
construction machines. It is particularly
useful for bearings which are seldom
lubricated and not easy to access but work
under severe working conditions.
190
A multipurpose industrial lithium soap
product for slow moving operations, prepared
from a well refined mineral oil. It is noncorrosive to non-ferrous bearing metals as
well as steel. Multifak Premium 3 has a good
oxidation stability and can be used in
continuous service up to +140oC.
>160
A light green coloured lithium grease based
on mineral oils. The grease has good
mechanical stability and water resistance. A
well formulated additive package helps rust
protection, anti-wear properties and oxidation
stability. The grease is suited for centralised
lubricating installations of utility vehicles as
well as for outside working units having long
tubing. It may also be used for gears where
grease lubrication is recommended.
75
Approvals:
Willy Vogel
Tecalamit
Lincolm
MB DBL 6833.00
MB Blue Book Spec.264
MAN 283- Li P00
GREASES
Product
MOLYTEX® EP
NLGI 2
COUPLING GREASE
NLGI 0/1
Quality level
ISO-L-XCCEB 2
DIN KPF 2 K-30
ISO-L-XCCIB 0/1
DIN KP 0/1 K-30
*in short periods/with re-lubrication
Operating Thickener
o
type
temp., C
-30 up to
130
-10 up to
120
(160)*
Li
Li and
polymers
Dropping
point,
o
C
210
>190
76
Performance Claims /
Approvals /
Recommendations
Description
Recommended for:
ASTM D4950 - LB
Association of American
Railroads Spec.
M-929-75
Multipurpose lithium EP grease containing
molybdenum disulfide. It is especially
developed for use in constant-velocity joints
and for construction, mining and agricultural
applications. Molytex EP grease is
formulated to perform well in conditions of
high loads and extreme temperatures.
Additionally, Molytex EP grease helps
material resistance to rust and is resistant to
water washout.
Recommended for:
Browning, Esco, Falk,
Eugen Schmidt,
Koppers, Jaure,
Wartsila, Fast, Renke,
USDA H2,
AGMA CG-1/2/3 Type
It is specially formulated to resist to oil
separation when subjected to the high
centrifugal forces normally found in
couplings. In actual field experience this
grease has shown its ability to perform
satisfactorily beyond 3 years. This product
should be used in all grease couplings,
especially in those hard to service or those
operating under severe conditions.
GREASES
Product
STARPLEX® EP
NLGI 2
NLGI 3
®
STARPLEX PREMIUM
NLGI 1
Quality level
ISO-L-XCDHB 2
DIN KP 2 N-30
ISO-L-XBDEB 3
DIN KP 3 N-20
ISO-L-XCDHB 1
DIN KP 1 N-30
*in short periods/with re-lubrication
Operating Thickener
o
type
temp., C
-35 up to
140
(180)*
-20 up to
150
(200)*
-30 up to
150
(220)*
Licomplex
Licomplex
Dropping
point,
o
C
>250
230
77
Performance Claims /
Approvals /
Recommendations
Performance claim:
Volvo
Description
Special multi-purpose lead-free lubricant
developed for long-term service in ball and
roller bearings in the high temperature range.
Starplex EP contains a mineral base oil
component and a temperature resistant
lithium complex soap as thickener, the
special additives included improve the EP
properties so effectively that safe long-term
lubrication is possible even under extreme
operating conditions. It provides corrosion
protection even under extreme environmental
impacts, it has good sealing properties.
It is intended for use in heavily loaded
equipment operating under adverse
conditions. It is especially recommended for
grease lubricated bearings on paper
machines where its outstanding water
resistance characteristics, EP properties,
oxidation stability and high dropping point
eliminates the need for separate greases in
the machine’s wet end and felt roll bearings.
It will also lubricate highly loaded bearings in
the press section.
GREASES
Product
Quality level
Operating Thickener
o
type
temp., C
Dropping
point,
o
C
Performance Claims /
Approvals /
Recommendations
Description
Calcium (Ca) based greases
904 GREASE
NLGI 1
TEXCLAD®
NLGI 2
ISO-L-XCAHA 1
DIN MF 1 C-30
ISO-L-XAAIB 2
DIN MF 2 C-10
DIN KF 2 C-10
*in short periods/with re-lubrication
-30 up to 60
-10 up to 60
Ca
Ca
110
A smooth calcium soap grease containing
approximately 12% graphite for curve rail
lubrication. It provides wear protection of
wheel flange and rail due to the reduction of
metal-to-metal contact. It also reduces the
noise on curves. It is suitable for a wide
variety of track and wheel lubricator systems.
106
It is a blackish, smooth and buttery water
stabilised calcium grease containing selected
graphite and molybdenum disulfide additives.
It can be used in cases where the content of
bitumen is an environmental problem.
Texclad 2 reduces wear by providing a
tough durable film. It is recommended for
use on fifth wheels and open gears of
construction machinery, ball mill gears and
large enclosed spur gears where oil leakage
is a problem.
78
GREASES
Product
NOVATEX® EP
NLGI 2
®
TEXANDO CX EP
NLGI 2
Quality level
ISO-L-XCCEB 2
DIN KP 2 K-30
ISO L-XBDHB 2
DIN KP 2 N-20
*in short periods/with re-lubrication
Operating Thickener
o
type
temp., C
-30 up to
120
-25 up to
140
(180)*
Ca
Cacomplex
Dropping
point,
o
C
145
>240
79
Performance Claims /
Approvals /
Recommendations
Description
Approvals:
Hoesch Rothe Erde
Novatex EP is calcium-12-hydroxystearate
grease made with a specially selected high
viscosity mineral oil and containing extreme
pressure and antiwear additives as well as
oxidation and corrosion inhibitors.
Specifically recommended for the lubrication
of plain and roller bearings of steel and paper
mill equipment which operate at
temperatures up to 120°C. It is good under
heavy water-washing conditions where
extreme pressure properties must be
maintained.
Approvals:
Voest Alpine
FAG
SKF
A water resistant and consistent lubricant
based on calcium complex soap and refined
mineral oil. It provides mechanical stability
and load-carrying capacity. Oxidation and
corrosion inhibitors help reliable corrosion
protection and long lifetime. Suitable for the
lubrication of heavy loaded bearings and
joints (CV-joints and spindles) subjected to
medium rotational speeds or low to medium
speed as well as to unsteady motion even in
the presence of water.
GREASES
Product
TEXANDO® FO 20
NLGI 2
Quality level
ISO L-XCDHA 2
DIN K 2 N-30
Operating Thickener
o
type
temp., C
-30 up to
150
(250)*
Cacomplex
Dropping
point,
o
C
280
Performance Claims /
Approvals /
Recommendations
Approvals:
Ford G-MC001-4505
Black&Decker
Voest Alpine
Alsen Breitenburg
FAG
SKF
Description
Calcium complex grease which contains
highly refined solvent neutral base oil. It also
contains a carefully selected additive
package to improve oxidation resistance and
corrosion protection. It can be used in a wide
temperature range. It is completely waterresistant, both against boiling water and
against slightly acidic or slightly alkaline
solutions. Within its wide usable temperature
range it provides effective protection against
wear due to the complex soap system.
Sodium (Na) based greases
MARFAK®
NLGI 00
NLGI 1
ISO L-XBBAA 00/1
DIN G 00 H-20
DIN K 1 H-20
*in short periods/with re-lubrication
-20 up to 95
Na
N/A (00)
170 (1)
80
These are fibrous sodium soap greases. The
fibrous nature of these products enables
them to effectively protect equipment from
contaminants like dust by providing a seal.
The sodium soap also has inherent rust
protection capability because of its ability to
emulsify small quantities of water. They are
used to lubricate plain and slow speed antifriction bearings. They form a tough durable
film. Recommended for use as chassis
lubricants for passenger cars, trucks, buses,
farm and construction equipment.
GREASES
Product
Quality level
Operating Thickener
o
type
temp., C
Open gear greases
TEXCLAD®
NLGI 2
®
TEXCLAD AL EP
NLGI 00/000
TEXCLAD® AL EP
NLGI 0
Dropping
point,
o
C
Performance Claims /
Approvals /
Recommendations
Description
For more details: see "Calcium (Ca) based greases"
ISO L-XBGHB
00/000
DIN OGPF00/000 S30
ISO L-XBGHB 0
DIN OGPF 0 S-20
*in short periods/with re-lubrication
-30 up to
200
(250)*
-20 up to
200
(250)*
Alcomplex
Alcomplex
>250
Texclad AL EP 00/000 is a sprayable
aluminium complex grease based on high
performance mineral oils. It contains very
fine graphite. Texclad AL greases are
designed for automatic spray lubrication of
toothed wheels, gear rings, toothed racks
and pinions under high pressure and
temperature operations. They suit for
lubrication of rotary furnaces or similar hot
lubricating points even under dusty and wet
conditions.
>250
Texclad Al EP 0 is a sprayable aluminium
complex grease based on high performance
mineral oils. It contains very fine graphite.
Texclad AL greases are designed for
automatic spray lubrication of toothed
wheels, gear rings, toothed racks and pinions
under high pressure and temperature
operations. They suit for lubrication of rotary
furnaces or similar hot lubricating points even
under dusty and wet conditions.
81
GREASES
Product
TEXCLAD® AL EP
NLGI 1
NLGI 2
TEXCLAD® AL HV
NLGI 0
Quality level
ISO L-XBDHB 1/2
DIN KP 1/2 P-20
ISO-L-XBGHB0
DIN OGPF 0 S-20
*in short periods/with re-lubrication
Operating Thickener
o
type
temp., C
-25 up to
150
(200)*
-20 up to
200
(250)*
Alcomplex
Alcomplex
Dropping
point,
o
C
Performance Claims /
Approvals /
Recommendations
Description
>250
Texclad AL EP 1 and 2 are natural colouring
aluminium-complex greases based on
mineral oil. These greases are suitable for
lubrication of roller and friction bearings
under high pressure and high temperatures
even under dusty and wet conditions.
Especially suitable for mining, sugar, cement
and steel industry applications.
>250
Texclad AL HV 0 is a sprayable aluminium
complex grease based on semi-synthetic
oils which can be sprayed. It contains very
fine graphite. Texclad AL HV 0 is designed
for automatic spray lubrication of toothed
wheels, gear rings, toothed racks and pinions
of any kind under high pressure and
temperature operations. It suits for lubrication
of rotary furnaces or similar hot lubricating
points even under dusty and wet conditions.
82
GREASES
Product
Quality level
Operating Thickener
o
type
temp., C
Dropping
point,
o
C
Performance Claims /
Approvals /
Recommendations
Description
Polyurea greases
HIGH TEMP PREMIUM 2
NLGI 2
CHEVRON SRI GREASE
NLGI 2
ISO L- XCFHB 2
DIN KPHC 2 P-30
ISO L- XCFIA 2
DIN K 2 N-30
-30 up to
180
(200)*
-30 up to
175
polyurea
polyurea
>240
243
Recommended by :
bearing manufacturers
electric motor manuf.
auto manufacturers
For more details please
contact our Area Sales
Manager.
*in short periods/with re-lubrication
83
High Temp Premium is a polyurea EP grease
based on synthetic base oils (PAO). It is a
high temperature grease for the lubrication of
plain and roller bearings and it is
recommended in high temperature
applications where conventional greases
tend to harden.
A high temperature ball and roller bearing
grease formulated with ISOSYN® base
stocks, a synthetic polyurea ashless organic
thickener, and advanced rust and oxidation
inhibitors. Recommended for use in
antifriction bearings operating at high speeds
(10,000 rpm and greater) where silent
operations are required.
INDEX
Product Name
904 Grease
Aries®
Biostar® Chain Bar 80
Brake Fluid DOT 4
Capella® A
Capella® HFC
Capella® Premium
Capella® WF
Cetus® DE
Cetus® PAO
Cetus® S
Chain Lubricant
Chevron HDAX® Low Ash Gas Engine Oil
Chevron SRI Grease
Cold Climate Power Steering Fluid
Compressor Oil EP VD-L
Coupling Grease
Delo® 1000 Marine 30/40
Delo® SHP 40
Diesel Engine Oil (DEO) 13 MG 20W-40
EDM Fluid
Geartex® EP-A 80W/75W-90/85W-90
Geartex® EP-B 85W-90
Geartex® EP-C 80W-90/85W-140
®
Geartex LS 85W-90/85W-140
Page
78
50
45
28
64
64
63
63
61
60
61
45
36
83
27
60
76
39
40
13
67
17
17
17
18
Product Name
Geartex® S4 75W-90
Geotex® HD 40
Geotex® LA 40
Geotex® LF 40
Geotex® Multigrade 15W-40
Geotex® PX 40
Glytex® HFC
Havoline® AFC
Havoline® CHL 8642
Havoline® Diesel Extra 10W-40
Havoline® Energy 5W-30
Havoline® Energy EF 5W-30
Havoline® Energy MS 5W-30
Havoline® Extra 10W-40
®
Havoline Premium 15W-40/20W-50
Havoline® PSF 9109
®
Havoline Synthetic 506.01 0W-30
Havoline® Synthetic 5W-40
Havoline® Ultra 5W-40
®
Havoline Ultra BM 5W-30
Havoline® Ultra G Longlife 5W-30
®
Havoline Ultra S 5W-30/5W-40
Havoline® Ultra V 5W-30
Havoline® XLC
®
Havoline XLI
84
Page
18
36
37
38
38
37
49
29
26
7
6
6
6
7
7
26
3
3
4
5
5
4
5
29
30
INDEX
Product Name
High Temp Premium 2
Honor® Ashless AW
Honor® AW
HPP Crankcase Cleaner
HPP Diesel Fuel System Cleaner
HPP Gasoline Fuel System Cleaner
Hydra® 46
Hydraulic Oil AW
LPG Compressor Oil
Marfak®
Meropa®
Meropa® BM
Meropa® WM
Metal Protective Oil L
®
Molytex EP
Motex® 2T
Motex® 2T Outboard
Motex® 2T-SX
Motex® 2T-X
®
Motex 4T-X 10W-40
Motex® S Outboard
Multifak® 264 EP 00/000
Multifak® EP
Multifak® Premium
®
Multifak T EP
Page
83
55
55
32
31
31
28
47
62
80
51
52
52
72
76
15
15
14
14
16
15
75
74
75
75
Product Name
Multigear® 80W-90/80W-140
Multigear® 75W-90 R
Multigear® MTF 75W-80W
Multigear® MTF HD
Multigear® RN Premuim 75W-80
Multigear® S 75W-90/75W-140
Novatex® EP
Omnis®
Paper Machine Oil XL
Pinnacle® EP
Pinnacle® Marine Gear
Pinnacle® WM
PS Fluid 11872
Rando® EP Ashless
®
Rando HD
Rando® HD-Z
Refrigeration Low Temp
Regal® EP
Regal® Premium EP
®
Regal SGT
Rustproof Compound L
Rustproof Oil 944D
Rustproof Oil 960
Safety Fluid HFAS
®
Starplex EP
85
Page
18
21
20
20
21
19
79
56
56
53
44
54
27
46
46
47
65
59
58
59
72
72
73
48
77
INDEX
Product Name
Starplex® Premium
SUTO 15W-30
SUTO Extra 10W-30
Synlube® WS
Synstar® Hydraulic HFDU
Synthetic ATF Heavy Duty
Taro® 20 DP
Taro® 30 DP
Taro® Special HT 70
Taro® 40 XL
Taro® 50 XL
Taro® Special HT LS 40
Texaco® Antifreeze and Summer Coolant
Texaco® MTF 94
®
Texamatic 1585
Texamatic® 4291
Texamatic® 7045E / Dexron III
Texamatic® 9226
Texamatic® 9330
®
Texando CX EP
Texando® FO 20
Texatherm®
Texatherm® HT
Texatherm® U
®
Texclad
Page
77
34
33
54
49
23
40
41
42
41
42
43
29
22
25
24
23
24
25
79
80
70
71
71
78, 81
Product Name
Texclad® AL EP 00/000, 0
Texclad® AL EP 1, 2
Texclad® AL HV
Texnap®
Texpar®
Textran® HD 10W/30/50
Textran® TDH Premium
Textran® V32
Transformer Oil GK-2
Transformer Oil Inhibited
Ursa® Extra Duty 40
Ursa® Marine 15W-40/40
Ursa® Premium FE 5W-30
Ursa® Super LA Monogrades
®
Ursa Super LA 15W-40/20W-50
Ursa® Super TD 10W-40
®
Ursa Super TD 15W-40/20W-50
Ursa® Super TDS 10W-40
Ursa® TDX 10W-40
®
Ursa Ultra 10W-30
Ursa® Ultra 15W-40
Ursa® Ultra X 10W-40
Veritas® 800 Marine 20/30
Way Lubricant X
White Oil Pharmaceutical / Technical
86
Page
81
82
82
68
68
35
34
35
66
66
13
39
8
13
12
11
12
10
9
10
11
8
43
57
69
Disclaimer
Whilst the accuracy of the information set out in the Texaco Product Guide is routinely monitored and updated, it may not be
accurate, up to date or applicable to the circumstances of any Chevron Product use. No warranty or representation (express
or implied) is made as to the accuracy or completeness of the data and information contained in the Texaco Product Guide.
Before using any Chevron Product, you should check the relevant Product Data Sheet. Chevron accepts no liability for any
loss suffered as a result of using any Chevron Product for any application other than applications specifically stated in the
Product Data Sheet.
Health, safety, storage and environmental
Based on current available information, Chevron products are not expected to produce adverse effects on health when used
for intended application and in accordance with the recommendations provided in the Material Data Sheets (MSDS). MSDSs
are available upon request through our local sales office, or via Internet. Chevron products should not be used for purposes
other than their intended use. When disposing of used products, take care to protect the environment and follow local
legislation.
87
For more information, visit www.chevronlubricants.com
or contact your local Texaco distributor.
A Chevron company brand
Version 5, March 2010
© 2010 Chevron Limited. All Rights Reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising