How can I access Main System or ViewLog on the second monitor?

How can I access Main System or ViewLog on the second monitor?
[FAQ]
How can I access Main System or ViewLog on the
second monitor?
Release Date: 10/5/2010
Applied to
GV-System of all versions
Question
I have set up two monitors on the computer of GV-System. How can I access the Main
System or the ViewLog on the second monitor?
Answer
To access the Main System (Multicam) or the ViewLog on the second monitor, it is required to
run DMPOS, a preinstalled program in GV-System, which can move GeoVision software such
as Main System, ViewLog, Remote Playback, EZViewlog, GV-LPR, or Multiview onto a
second monitor.
How to do
1. Run DMPos.exe in your GV folder. The default location is C:\. For example, the GV-800
folder is located in C:\GV-800.
GeoVision Inc.
10/26/2010
1
Revision Date:
2. Under the Screen Setup tab, select Twin View from the Display Mode drop-down list.
3. Click the desired GeoVision application tab, for which will be moved to the second monitor.
In this case, we will use ViewLog as the example.
4. Under the ViewLog tab, select Monitor 2 from the drop-down list. Click OK.
After the settings, you can view the ViewLog on the second Monitor.
GeoVision Inc.
10/26/2010
2
Revision Date:
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising