LU-1508NS LU-1510N-7 LU-1509NS LU-1511N-7

LU-1508NS LU-1510N-7 LU-1509NS LU-1511N-7
1-needle, Unison-feed, Lockstitch Machine with Vertical-axis Large Hook
[Gauge for standard]
LU-1508NS
LU-1508NH (for extra heavy materials)
LU-1510N (with automatic lubricating mechanism)
automatic lubricating mechanism
LU-1510N-7 (with
and automatic thread trimmer)
[Gauge for LU-2200]
LU-1509NS
LU-1509NH (for extra heavy materials)
automatic lubricating mechanism
LU-1511N-7 (with
and automatic thread trimmer)
● The new mechanism with a rectangular feeding motion
promises consistent feed of materials of all thickness without
stitch gathering.
The lower orbit of the feed dog prevents the material from
flopping and reduces operating noise and vibration.
〈Rectangular feed〉LU-1508NS, LU-1510N, LU-1510N-7,
LU-1509NS, LU-1511N-7
Compared with the elliptical feed, the rectangular feed helps
reduces gathered stitches.
〈Complete rectangular feed〉LU-1508NH, LU-1509NH
The locus of the "needle" and "feed" motions are nearly
rectangular. This prevents stitch gathering and provides
efficient feed on multi-layered portions of material.
● With the adoption of a new rectangular feed mechanism, an
alternating vertical movement mechanism, and a unisonfeed mechanism, the machine can feed heavy materials
powerfully and smoothly. Well tensed seams are
consistently produced without pitch errors.
● Even when a heavy material is used, the presser foot lift
does not decrease. This means that the presser foot comes
into contact with the material at exactly the same time that
it does when sewing lighter-weight sections of the material.
As a result, the walking foot retains the material with a
consistent pressure to prevent irregular stitches.
● LU-1508NH, LU-1509NH
• The maximum stitch length is 10mm. The complete
rectangular feed locus enables accurate feed of extra heavy
materials while preventing stitch gathering.
LU-1510N-7-0BBAA/XC-E500
• With its sufficient needle bar stroke of 38mm and long 190R
needle, the machine supports the sewing of extra heavy
materials.
• The machine comes with an extra large steel handwheel with
a diameter as large as φ175.
● LU-1510N, LU-1510N-7, LU-1511N-7
• The machine is equipped with a bottom-feed adjusting
mechanism that adjusts the amount of bottom-feed while
keeping the needle-feed fixed. With the mechanism, the
machine can prevent uneven material feed without changing
stitch pitches.
• Automatic lubricating mechanism improves maintainability.
The machine is provided with a sub oil pan and double filter
to keep dust from entering the oil.
● LU-1510N-7, LU-1511N-7
• The machine comes with JUKI's proven thread trimming
mechanism. With its robust knife and cam configuration,
the thread trimmer reliably cuts threads as thick as #5.
• The vertical strokes of presser foot and walking foot (their
alternating vertical movement) can be easily changed using a
large dial mounted on the top surface of the machine head.
• In addition the sewing speed is automatically adjusted with
the set value. With this feature, ideal sewing conditions are
maintained at all times.
WHEN YOU PLACE ORDERS
Gauge for standard
[Without automatic thread trimmer]
LU1508N
Application
For heavy materials
For extra heavy materials
[With automatic thread trimmer]
LU1510N
Pneumatic
auto-lifter
Pedal switch type
(AK123B)
Code
S
H
15
LU1510N70BB
Code
B
DL device
Not provided
Provided
Code
Z
A
Option
Not provided
AE-10 (Bobbin thread remaining
amount detecting device)
Code
Z
Code
Z
A
Option
Not provided
AE-10 (Bobbin thread remaining
amount detecting device)
Code
Z
A
Gauge for LU-2200
[Without automatic thread trimmer]
[With automatic thread trimmer]
LU1509N
LU1511N70BB
Application
For heavy materials
For extra heavy materials
Pneumatic
auto-lifter
Pedal switch type
(AK123B)
Code
S
H
Code
B
DL device
Not provided
Provided
● PSC box/operation panel for SC
●Motor for SC
SC380
For General
Export
For JUS(LA)*
For CE
PSC box
Single-phase
3-phase
Single-phase
3-phase
Single-phase
A
M
220∼240V
200∼220V
110∼120V
220∼240V
220∼240V
Code
07
11
37
38
34
Operation panel
Not provided
Operation panel display language: English.
Instruction manual comes in three different languages.
Operation panel display language: English.
Instruction manual comes in five different languages.
Code
00000
E500B
For General
Export
For JUS(LA)*
E500C
For CE
Motor
Single-phase
3-phase
Single-phase
3-phase
Single-phase
Code
200∼240V
60
100∼120V
200∼240V
200∼240V
61
62
63
*JUS: North America and Central and South America.
LU-1508NS, 1508NH, 1510N, 1510N-7, 1509NS, 1509NH, 1511N-7 (September, 2003) 1/4
SPECIFICATIONS
LU-1508NS, LU-1509NS
LU-1508NH, LU-1509NH
−
−
For heavy materials
For extra heavy materials
2,500rpm
2,000rpm
9mm (Normal/Reverse feed) 10mm (Normal/Reverse feed)
36mm
38mm
By hand: 9mm, By knee: 16mm (max.)
Model name
Application
Max. sewing speed
Max. stitch length
Needle bar stroke
Lift of the presser foot
Auto-lifter
Option
Alternating vertical movement
Dial for adjustment of alternating
vertical movement
Thread take-up
Hook
Needle
(at the time of delivery)
Thread
Locus of feed
Needle thread tension box
Bottom-feed micro-adjustment
mechanism
Pitch changing method
Bobbin thread winder
Knee-lifter mechanism
Safety mechanism
Lubrication
Lubricating oil
Distance from needle to machine arm
Bed size
Weight of the machine head
Automatic reverse feed function
Compressed air and air consumption
Power requirement
Power consumption
2.5∼6.5mm
LU-1510N
−
LU-1510N-7, LU-1511N-7
With automatic thread trimmer
For heavy materials
2,500rpm
3,000rpm
9mm (Normal/Reverse feed)
36mm
By hand: 9mm, Auto: 16mm
Provided as standard
(Pneumatic auto-lifter: AK123B)
1∼6.5mm
−
Provided as standard
Slide type
Vertical-axis double-capacity hook
Standard 190R or 135×17
135×17
(Nm160) Nm125∼Nm200
(Nm160) Nm125∼Nm180
#20∼#1, B69∼B207,
#30∼#5, B46∼B138,
Nm=40/3∼8/3
Nm=60/3∼20/3
Complete rectangular feed
Rectangular feed
Dual-tension method
135×17
(Nm160) Nm125∼Nm180
#30∼#5, B46∼B138,
Nm=60/3∼20/3
Rectangular feed
−
Provided as standard
By dial
Built on the machine head
Built on the machine head
−
Provided as standard (Reset with the push of a button)
Centralized oil wick lubrication (hook: automatic)
Automatic
JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
255mm
517mm×178mm
42.5kg
44.5kg
43kg
48kg
Option
Provided as standard
−
0.5MPa {5kg/F} • 0.3NR/min
Single-phase 100∼120V, 220∼240V
−
3-phase 200∼220V, 220∼240V
−
550VA
OPTIONS
Model
Part No.
Description
DL21
(G kit)
GDL-21000GA0
For installed after the setup of the machine
AE-10
(Kit A)
GAE-10000AA0
For installed after the setup of the machine
AK119A
AK119B
AK120A
AK120B
GAK-A19010A0
GAK-A19010B0
GAK-A20010A0
GAK-A20010B0
Knee switch type
Pedal switch type
Knee switch type
Pedal switch type
213-48552
Pneumatic one-touch type reverse feed stitching device
(provided with air regulator)
―
Feature
Applicable model: LU-1510N-7, LU-1511N-7
For sewing processes that handle heavy materials or multi-layered
parts of material, the alternating vertical movements of the walking
foot and presser foot can be quickly set to maximum by pressing the
DL switch. The result is beautiful seams free from gathered stitches.
The machine is provided with both hand switch and knee switch.
The bobbin thread remaining-amount detecting device warns the
operator with a buzzing sound and lamp indication of the time for
bobbin thread replacement. This allows the operator to concentrate
on sewing work without concern for the remaining amount of
bobbin thread. Since the device directly detects the bobbin thread
amount remaining, cumbersome setting is no longer required
regardless of the material, thread and process.
Pneumatic auto-lifter
Pneumatic auto-lifter
(provided with air regulator)
Applicable model: LU-1508N, LU-1508HN, LU-1510N, 1509N, 1509NH
Applicable model: LU-1508N, LU-1508HN, LU-1510N, 1509N, 1509NH
*To use auto-lifter and reverse feed stitching device in combination,
select AK119A or AK119B
MAH-152010A0
SS-7151610-SP×2
H152
Suspended ruler
WP-0621016-SD×2
WP-0610002-KN×2
―
PK75
MAY-BL6B10A0
MAY-BL6B20A0
―
Core dia. 6∼10mm
Core dia. 2∼5mm
Piping holder
3-pedal unit
210-06507
NS-6110530-SP
―
210-06408
Additional spring for presser bar
210-16101
210-06002×3
LU-1508NS, 1508NH, 1510N, 1510N-7, 1509NS, 1509NH, 1511N-7 (September, 2003) 2/4
―
Applicable model: LU-1510N-7, LU-1511N-7
Highly operable 3-pedal unit for standing work.
EXCHANGEABLE GAUGE PARTS
Description
Throat plate
Feed dog
213-49303
(needle hole: 2.5×7.2)
(groove in front and back)
Notes
6.2
B1109-563-000 (area: 33.2×6.6)
Lower fittings standard
(equipped on machine)
20
7.2
2.5
213-49204
(needle hole: 2.5×3.5)
(groove in front and back)
6.2
20
3.5
Equipped on LU-1508N, LU-1508NH,
LU-1510N
Stitch length up to 9mm
(10mm in case of LU-1508NH)
Equipped on LU-1510N-7
Stitch length up to 9mm
2.5
B1613-563-000
(needle hole: 2.5×7.2)
(groove at back)
Lower fittings standard
6.2
20
7.2
Not applicable to LU-1510N-7
2.5
B1109-053-00A (area: 31.7×6.6)
Lower fittings
(no groove)
B1613-053-000
(needle hole: 2.5×7.2)
(No groove)
6.2
Stitch length up to 9mm
20
7.2
Equipped on LU-563N
Stitch length up to 9mm
Not applicable to LU-1510N-7
2.5
B1613-563-B00
(needle hole: φ2.4)
B1613-053-B00
(needle hole: φ1.9)
Lower fittings for thin
needle
B1109-562-A00 (area: 31.7×8.8)
B1613-562-A00
(needle hole: φ2.5×8)
Stitch length up to 9mm
6.2
D
20
8.5
Stitch length up to 9mm
20
Fitting for piping
Not applicable to LU-1510N-7
Not applicable to LU-1510N-7
2.5
B1109-563-C00 (area: 30.2×6.8)
Lower fittings for tape
binding
Description
B1613-563-C00
(needle hole: φ2.5)
Stitch length up to 7mm
6.4
13.5
Not applicable to LU-1510N-7
Presser foot
Walking foot
B1470-241-H00
(width: 6.2, needle hole: φ2.8)
Notes
Equipped on LU-1508N, LU-1508NH
LU-1510N, LU-1510N-7
Stitch length up to 10mm
B1525-241-HA0
14
Upper fittings standard
D1470-241-E0A
(width: 6.2, needle hole: φ2.8)
(front-open)
Stitch length up to 10mm
213-50004
(width: 6.2, needle hole: φ2.8)
(with groove, teeth at the toe)
Stitch length up to 10mm
B1470-053-000
(width: 4.5, needle hole: φ2.8)
Stitch length up to 10mm.
B1470-053-C00
(width: 4.5, needle hole: φ2.3)
Stitch length up to 10mm
B1470-245-000
(width: 6, needle hole: φ2.2)
(front-open)
Stitch length up to 6mm
B1476-245-00C
(width: 5.7, needle hole: φ2.3)
(with teeth)
Stitch length up to 6mm
Suitable for thick thread.
B1525-053-0A0
13
B1524-245-0A0
(width: 9.6mm)
6.6
Upper fittings
left handed
B1529-245-0AC
(width: 7.7mm)
(with groove)
6.1
LU-1508NS, 1508NH, 1510N, 1510N-7, 1509NS, 1509NH, 1511N-7 (September, 2003) 3/4
15
Description
Presser foot
B1529-245-0AD
(width 6.7mm)
(with teeth)
Upper fittings
left handed
B1525-563-SAD
(width 9.4mm)
(with teeth)
Walking foot
4.9
8
Notes
B1476-245-00D
(width 4.1, needle hole: φ2.6)
(with teeth)
Stitch length up to 8mm
103-38309
(width 4.5, needle hole: φ2.2)
(with teeth at the toe)
Stitch length up to 10mm
1.2
3.3
MAQ-093080A0
(width 17mm)
(with teeth)
8.3
Upper fittings
for binding
MAQ-092080A0
(width 13.5mm)
(with teeth)
Upper fittings
right handed
B1529-245-00A
(width 9.5mm)
(with teeth)
5
8.5
Stitch length up to 10mm
MAQ-09307000
(width 13.5, needle hole: φ2.5)
5
8.5
Stitch length up to 10mm
MAQ-09207000
(width 10, needle hole: φ2.5)
Stitch length up to 10mm
B1476-245-00A
(width 5.5, needle hole: φ2.6)
(with teeth)
Stitch length up to 8mm
B1470-563-E00
(width 10, needle hole: φ2.5×5)
Stitch length up to 10mm
103-25306
(width 8, needle hole: φ2.3)
Stitch length up to 10mm
103-26205
(width 8, needle hole: φ2.3)
Stitch length up to 6mm
8.3
7.5
B1525-563-E00
15.5
103-25157
13
Upper fittings wide
MAN-10452000
(width 13.5, needle hole: φ2.5)
(with teeth at the toe)
103-26304
13
2
B1530-245-0A□
*□: [D, F, H, K]
B1478-245-000
(width 4.5, needle hole: φ2.1)
(universal, regardless of size)
Stitch length up to 8mm
B1474-245-00□
*□: [D, F, H ,K]
(width 13, needle hole: φ2.4)
(with teeth)
Stitch length up to 8mm
B1472-245-00□
*□: [D, F, H ,K]
(width 8.2, needle hole: φ2.7)
(with teeth)
Stitch length up to 8mm
B1479-245-00□
*□: [D, F, H]
(width 5.9, needle hole: φ2.4)
Stitch length up to 8mm
B1575-245-00B
(width 4.5, needle hole: φ2.1)
(universal, regardless of size)
Stitch length up to 8mm
16.4
B1527-245-00□
*□: [C, D, F, H, K]
16.4
Upper fittings for piping
B1525-245-0A□
*□: [D, F, H, K]
(width 16.6mm)
(with teeth)
B1531-245-0A□
*□: [D, F, H]
Upper fittings for piping
(back cut)
B1528-245-00□
*□: [B, D, F, H, K]
11.1
16.4
Upper fittings for piping
(double groove)
LU-1508NS, 1508NH, 1510N, 1510N-7, 1509NS, 1509NH, 1511N-7 (September, 2003) 4/4
Selection of presser foot:
C : 4.0mm (5/32")
D : 4.8mm (3/16")
F : 6.4mm (1/4")
H : 7.9mm (5/16")
K : 9.5mm (3/8")
Selection of presser foot:
C : 4.0mm (5/32")
D : 4.8mm (3/16")
F : 6.4mm (1/4")
H : 7.9mm (5/16")
K : 9.5mm (3/8")
Selection of presser foot:
D : 4.8mm (3/16")
F : 6.4mm (1/4")
H : 7.9mm (5/16")
K : 9.5mm (3/8")
Selection of presser foot:
D : 4.8mm (3/16")
F : 6.4mm (1/4")
H : 7.9mm (5/16")
Selection of presser foot:
(width)
B : 3.2mm (1/8")
-19.0mm
D : 4.8mm (3/16")
-19.0mm
F : 6.4mm (1/4")
-19.0mm
H : 7.9mm (5/16")
-24.0mm
K : 9.5mm (3/8")
-22.5mm
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising