S60/65 - RN Access Solutions

S60/65 - RN Access Solutions
Telescopic
™
™
Booms
S - 60/S - 65
Self-Propelled
Designed for
easy deliver y and
fast set-up.
The Genie S-60 and S-65 are the value leaders in
Genie’s newly redesigned S-60/S-65 incorporates a unique virtual pivot boom design and state of the art
with an additional 5 ft (1.52 m) articulating jib boom. Customize your boom from many option packages.
S-65 Out-and-Up
Articulating Jib Boom
This special option gives you
an additional 5 ft (1.52 m) of
horizontal reach for a total of 55 ft 3 in
(16.8 m). The S-65 jib boom gives you
flexibility too – 135º of working range.
You not only access 75º above horizontal,
but you can get to 60º below horizontal.
Powerful Gas Engine
The new GM 3.0L 80 hp (59 kw) Duel
Fuel engine is stronger and more
powerful, with enhanced performance
in high altitude and cold weather
environments. The fuel-injection system
requires less service work than
carburetor systems, eliminating the
need for throttle linkage and choke
adjustments.
Standard Features
Proportional Controls
Allow smooth operation and easy positioning.
160° Hydraulic Platform Rotator
Gives you precise placement without repositioning the boom.
Easily Accessible Components
The swing-out engine tray and easy-to-understand electrical system simplify
routine maintenance.
Positive Traction Drive
Full-time positive traction system standerd
on 4x4 models and on 4x2 models.
Drive Enable System
Informs operator when the drive and steer functions will
move opposite the controller movements.
Low-Profile Chassis Covers
Provide high visibility for the operator while unit is in
stowed position.
Platform Controls
Large, simple-to-use controls for easy operation.
Transportability
The S-60 and S-65 are designed to load and unload easily from
transport vehicles.
boom
features. Choose the Genie S-60 boom, with 66 feet 2 inches (20.3 m) of working height, or the S-65,
Increased Lift Speed
The capability to operate multiple functions simultaneously results
in maximum lift speed. The S-60 elevates from the ground to full
height in just 57 seconds.
Stiffer Mast Design
The new flat-bottom mast design is 7% stiffer when fully extended.
The stiffer mast results in less platform movement for more
comfortable operation.
Engine Options –
Tier II Emmission Compliant
GM 3.0L Duel Fuel
80 hp (59 kw)
Deutz Diesel F3L 2011F
49 hp (36 kw)
Perkins Diesel 404-22
50 hp (37 kw)
Platform Options
Standard: Steel 6 ft (1.83 m)
Optional: Steel 8 ft (2.44 m)
Drive Options
4x2 – two wheel drive
• gradeability up to 30%
4x4 – four wheel drive
• gradeability up to 50%
• gradeability is theoretical,
traction–dependent
Tire Options
Rough terrain air
Rough terrain foam-filled
Terrain Tracking Active
Oscillation System
This revolutionary system automatically
senses the terrain and adjusts the front
axle oscillation based on ground
conditions. The system maximizes
four point contact with the ground
for improved traction and an
amazingly smooth ride.
™
™
Easily customized to
meet your needs:
S - 60/S - 65
stick
n the industry.
S - 60/S - 65
™
™
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Standard Features
S-60 has 66 ft (20.3 m) working height
S-65 has 71 ft (21.9 m) working height
■
S-60 has 50 ft 4 in (15.3 m) horizontal reach
■
S-65 has 55 ft 3 in (16.8 m) horizontal reach
■
Up to 500 lb (227 kg) lift capacity
■
Full-time active Oscillating axle
■
Tier II emission capable engine
■
Dual fuel (Gas/LPG) or
diesel engine options
■
Hall effect joystick controllers
■
Fully proportional joystick controls
with ramp up/down feature
■
Hydraulic platform rotation
■
360º continuous turntable rotation
■
12V DC auxiliary power
Fuel select switch on platform and
ground control panels (Gas/LPG models)
Closed-loop hydrostatic drive
Positive traction drive
Drive enable system
Self-leveling platform
Range of Motion
Low profile,
low pressure tires
Locking turntable covers
Anti-restart
engine protection
Foot switch time out
Auto engine
fault shutdown
AC wiring to platform
Wire braided hose
Tilt alarm
Horn
Hour meter
■
■
Options and Accessories
■
■
■
■
■
■
■
■
■
■
■
■
Alarm package
Cold start packages
2500 or 3000 watt
AC generator
Belt-driven generator
8 ft (2.44 m) steel platform
750 lb (340 kg) lift
capacity option on
the S-60
Platform swing gate
Air line to platform
Platform rail pinch guard
Platform work lights
Lockable platform
control box cover
Second 12V battery
■
■
■
■
■
■
■
■
■
■
■
■
Foam-filled, non-marking
and floatation tire
packages
Tool tray
Fluorescent tube caddy
Hostile environment
packages
Hydraulic oil cooler
LPG tank
GS/LPS rating for GM
engine powered machines
Driving lights
Pipe cradle
Weld cables
On-board weld package
Diesel scrubber
Standards Compliance
■
■
ANSI/SIA A92.5
CSA CAN3-B354.4-M82
■
■
CE compliance option
AS 1418.10
Specifications
Model
A
B
C
D
E
F
G
Working height max*
Platform height max
Height - stowed
Length - stowed
Width
Wheelbase
Ground clearance
Platform length: 6 ft
8 ft
Platform width: 6 ft
8 ft
Horizontal reach max
Maximum lift capacity
6 ft platform
Maximum lift capacity
8 ft platform
Turning radius - outside
Turning radius - inside
Turntable rotation
Turntable tailswing
Power source
S-60
US
Metric
S-65
US
Metric
66 ft 2 in
60 ft 2 in
8 ft 10 in
27 ft 4 in
8 ft 2 in
9 ft
12 in
30 in
36 in
72 in
96 in
50 ft 4 in
500 lb
20.3 m
18.3 m
2.69 m
8.33 m
2.49 m
2.74 m
30 cm
76 cm
91 cm
1.83 m
2.44 m
15.3 m
227 kg
71 ft 4 in
65 ft 4 in
8 ft 10 in
31 ft
8 ft 2 in
9 ft
12 in
30 in
36 in
72 in
96 in
55 ft 3 in
500 lb
21.9 m
19.9 m
2.69 m
9.45 m
2.49 m
2.74 m
30 cm
76 cm
91 cm
1.83 m
2.44 m
16.8 m
227 kg
500 lb
227 kg
500 lb
227 kg
18 ft 7 in
5.66 m
18 ft 7 in
5.66 m
7 ft 10 in
2.39 m
7 ft 10 in
2.39 m
360° continuous
360° continuous
3 ft 11 in
1.19 m
3 ft 11 in
1.19 m
GM 3.0L 80 hp (59 kw), Duel Fuel
Deutz Diesel F3L 2011F 49 hp (36 kw)
Perkins Diesel 404-22 50 hp (37 kw)
Controls
ALC 500
ALC 500
Platform rotation
160°
160°
Tires
15 - 19.5 NHS
15 - 19.5 NHS
Hydraulic tank capacity
45 gal
170.3 litre
45 gal
170.3 litre
Fuel tank capacity
40 gal
151.4 litre
40 gal
151.4 litre
Weight**
21,000 lb
9,525 kg
22,200 lb
10,069 kg
Drive speed - stowed 2WD 4.4 mph
7.1 km/h
4.5 mph
7.2 km/h
Drive speed - stowed 4WD 3.7 mph
6.0 km/h
3.5 mph
5.6 km/h
Drive speed - extended
(all models)
0.6 mph
1.0 km/h
0.6 mph
1.0 km/h
Gradeability*** - stowed
Gradeability*** - st2WD 30%
30%
Gradeability*** - st4WD 45%
45%
* The metric equivalent of working height adds 2 m to platform height. U.S. adds 6 ft to platform height.
** Weight will vary depending on options and/or country standards.
*** (Gradeability is theoretical, traction-dependent)
Distributed By:
GENIE UNITED STATES
18340 NE 76th Street
P. O. Box 97030
Redmond, Washington 98073-9730
Telephone (425) 881-1800
Toll Free in USA/Canada 800-536-1800
Fax (425) 883-3475
http://www.genieindustries.com
GENIE UNITED KINGDOM
The Maltings, Wharf Road
Grantham
Lincolnshire NG31 6BH
England
Telephone: +44 (0)1476 584333
Fax: +44 (0)1476 584334
http://www.genieindustries.com
For further information, please contact your local distributor or the Genie sales office listed. Continuous improvement of our products is a Genie policy. Product specifications are subject to change without notice or obligation. The photographs and drawings in this
brochure are for illustrative purposes only. Refer to the appropriate Genie S-60 and S-65 Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using a Genie S-60 or S-65, or to otherwise
act irresponsibly, may result in serious injury or death. Copyright © 1999 by Genie Industries. Printed in the USA on recyclable paper. “Genie” and “S” are Registered Trademarks of Genie Industries in the USA and many other countries. Genie is the owner of US
Patent: 5,447,331 and Patents Pending. S60 6K 0503J. Part No. 65016
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising