ds series - Topcon Positioning Systems

ds series - Topcon Positioning Systems
DS SERIES
DIRECT AIMING
TOTAL STATION
DS SERIES
Direct Aiming Total Station
• Automatic aiming technology
•MAGNET® on-board software
• Ultra-powerful, advanced EDM
• Exclusive LongLink™ communications
• TSshield™ advanced security and maintenance
• Rugged, waterproof design
In the bush, dim conditions, crowded traffic or harsh environments, the DS Series works perfectly
A professional motorized total station, the DS is a mid-ranged positioning product for the construction professional
who is looking for productivity enhancement from servo motors and XPointing™ technology. The MAGNET® on-board
software has an intuitive interface to assist with staking out complex structures. This rugged waterproof designed
total station has the latest technology of TSshield™ advanced security and maintenance, and exclusive LongLink™
communications.
Work directly on the bright, color touchscreen or with the alpha-numeric keyboard, to achieve higher levels of production
with MAGNET® Field on-board software. The DS total station can be used on a wide variety of applications, from
building layout to earthwork volumes, and land surveying.
A world’s first – TSshield™
Topcon is proud to offer another world’s first technology in all DS Series total stations – TSshield™. Every instrument
is equipped with a telematics-based multi-function communications module providing the ultimate security and
maintenance capabilities for your investment.
If the activated instrument is lost or stolen, send a coded signal to the instrument and disable it. This feature secures the
total station anywhere in the world.
In the same module you have daily connectivity to cloud-based Topcon servers that can inform you of available software
updates and firmware enhancements.
Auto collimation Xpointing™ technology
The DS Series employing Xpointing technology features
a new intelligent algorithm that automatically aims to
the prism with precisely corrected angle readings. The
Xpointing technology works in dim or dark conditions
where the prism can be difficult to find.
Whatever the job requires and wherever operators
must go, the the DS gets your job done faster, while
maintaining accuracy.
Fast and powerful EDM
1,000 m non-prism range
World’s first
TSshield™ system
Advanced angle
accuracy
Easy access USB Type
A/B flash drive port
Exclusive “STAR-KEY”
functionality
Rugged waterproof/
dustproof IP65 design
Backlit 25 key keyboard and
directional arrow key
DS SERIES
Ultra-powerful, advanced EDM
Telescope
Resolving power
2.5”
Magnification
30x
The 1,000 m reflectorless measurement
can be achieved with a smaller beam spot
size. Measurements can be as fast as 0.9
seconds in the accurate fine mode to most
object surfaces over longer distance.
Angle Measurement
Min. Resolution/Accuracy
DS-101
1”
DS-103
3”
DS-105
5”
Tilt Angle Compensation
Compensation
Dual-axis compensator
Range
±6’
Distance Measurement
Prism EDM Range
6,000 m
Prism EDM
Accuracy
1.5 mm + 2 ppm
Non-Prism Range
1,000 m
Non-Prism
Accuracy
2 mm + 2 ppm
(0.3 - 200 m)
Measuring Time
Fine: 0.9 sec
Rapid: 0.6 sec
Tracking: 0.4 sec
Communications
LongLink™ rover communications*
USB 2.0 Slot (Host + Slave)
RS-232C Serial
General
Display
Color Touch TFT
240 x 320 Display
(Dual Display)
Keyboard
25 keys with illuminator
(Single Keyboard)
Battery Operation
Up to 5 hours
Dust/Water Rating
IP65
Wireless
Connection
Bluetooth Class 1
Operating Temp
-20°C to 50°C
®
* The communication range may vary due to the condition
of the area
For more information:
topconpositioning.com/ds-series
Specifications subject to change without notice.
©2016 Topcon Corporation All rights reserved.
7010-2127 B 2/16
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by Topcon is under license. Other trademarks
and trade names are those of their respective owners.
LongLink™ communications
LongLink is used to establish a wireless
linkage with a data terminal at the prism
side, in distances up to 300 m*. Configure
an economical robotic system to enable
even more productive data collection.
Graphical navigation is available at the pole.
Advanced angle accuracy
Topcon’s advanced angle encoder
technology with exclusive calibration
system provides “Best in Class” angle
accuracy, up to 1-second (DS 101).
EDM trigger key
The EDM trigger key is located in a perfect
touch location. Simply press the key to
measure a distance. The location of the
key promotes angle stability. The key is
waterproof and dustproof and can be
used easily in cold weather with gloves.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising