core watches

core watches
CORE WATCHES
1
MAXUM
Maxum watches are 100-200 metres water resistant,
feature stainless steel construction and offer an
unparalleled 5 year limited warranty on stainless steel
watches & 3 year warranty on digitals. Designed and
developed in Australia, Maxum combines function, form
and style to create durable, contemporary products that
are designed to embrace the Australian surf lifestyle.
The Maxum range offers sports digital watches, everyday
dress watches in our Core collection and our premier
collection of Waverider surf watches.
The Maxum Waverider range is the ultimate surf watch,
offering 200m water resistancy, solid stainless steel
construction, heat timing bezel and a superior Tide
Master collection. Making Waverider, the perfect watch
for water sports enthusiasts.
Note: Please refer to the ‘WATER RESISTANCE GUIDE’
and the ‘WATCH CARE AND PRECAUTIONS’ for more
information.
2
3
MAXUM KEY FEATURES
MAXUM WAVERIDER KEY FEATURES
- 100 meters water resistant on all core & digital watches
- 200 meters water resistant
- Stainless steel construction
- Stainless steel construction
- 5 year limited warranty on all stainless steel watches
- 5 year limited warranty
- 3 year limited warranty on all digital watches
- High quality Swiss movement on analogue tide watches
- High quality Japanese movement
- Scratch resistant mineral crystal lens
- Scratch resistant mineral crystal lens
- Screw down crowns
- Screw down crowns on all gents styles (except digital styles)
- Spring & neap tide
- Self adjustable links on many jewellery styles (unhook
the clasp and remove the desired amount of links)
- Heat timing bezel
4
5
SCREW DOWN CROWN
To change the time or date on your watch, the crown of
the watch must first be unscrewed. Do this by following
the below steps:
1.
2.
3.
4.
Make sure your watch is completely dry
Turn the crown anticlockwise
Once the crown is completely unscrewed it can be pulled out to set your watch
After setting, push the crown back in fully, then while applying slight pressure, turn the crown clockwise to reseal your watch.
Important: The crown must be completely screwed in
for your watch to be water resistant. Never unscrew the
crown when your watch is in water or is wet.
6
3 HAND ANALOGUE
To set the time:
1. Make sure your watch is completely dry
2. For gents and Waverider styles only, unscrew the crown (see SCREW DOWN CROWN INSTRUCTIONS), for all other styles go to step 3
3. Pull the crown out to position ‘B’
4. Turn the crown clockwise or anticlockwise to move the hands to the correct time
5. Push the crown back to position ‘A’, or
6. Screw the crown back to its original position
(see SCREW DOWN CROWN INSTRUCTIONS)
Note: No backward hand or
date adjustments should be
made with analogue hands
between 8pm and 3am. At
these times, the gears are too
close together and such a
change could cause damage.
7
3 HAND ANALOGUE WITH DAY/DATE
(see SCREW DOWN CROWN INSTRUCTIONS)
To set the time:
1. Make sure your watch is completely dry
2. For gents and Waverider styles only, unscrew the crown
(see SCREW DOWN CROWN INSTRUCTIONS), for all other styles go to step 3
3. Pull the crown out to position ‘C’
4. Turn the crown clockwise or anticlockwise to move the
hands to the correct time
5. Push the crown back to position ‘A’, or
6. Screw the crown back to its original position
(see SCREW DOWN CROWN INSTRUCTIONS)
To set the date:
1. Make sure your watch is completely dry
2. For gents and Waverider styles only, unscrew the crown (see SCREW DOWN CROWN INSTRUCTIONS), for all other styles go to step 3
3. Pull the crown out to position ‘B’
4. Turn the crown anticlockwise (toward you) to
correct date
5. Push the crown back to position ‘A’, or
6. Screw the crown back to its original position
(see SCREW DOWN CROWN INSTRUCTIONS)
To set the day:
1. Make sure your watch is completely dry
2. For gents and Waverider styles only, unscrew the crown (see SCREW DOWN CROWN INSTRUCTIONS), for all other styles go to step 3
3. Pull the crown out to position ‘B’
4. Turn the crown clockwise to correct weekday
5. Push the crown back to position ‘A’, or
6. Screw the crown back to its original position
8
Note: The date changes
automatically every 24 hours
Note: No backward hand or date
adjustments should be made with
analogue hands between 8pm
and 3am. At these times, the gears
are too close together and such a
change could cause damage.
9
MULTIFUNCTION
FUNCTIONS
- Analogue - 3 hands
- 24 hour
- Day and date
To set the time:
1. Make sure your watch is completely dry
2. For gents and Waverider styles only, unscrew the crown
(see SCREW DOWN CROWN INSTRUCTIONS), for all other styles go to step 3
3. Pull the crown out to position ‘C’
4. Turn the crown clockwise to move the hands to the
correct time
5. Push the crown back to position ‘A’, or
6. Screw the crown back to its original position
(see SCREW DOWN CROWN INSTRUCTIONS)
Note: The 24 hour indicator requires no adjustment. It
changes automatically when changing the time.
10
To set the day:
1. Make sure your watch is completely dry
2. For gents and Waverider styles only, unscrew the crown
(see SCREW DOWN CROWN INSTRUCTIONS), for all other styles go to step 3
3. Pull the crown out to position ‘C’
4. Turn the crown clockwise and advance 24 hours to change day
5. Push the crown back to position ‘A’, or
6. Screw the crown back to its original position (see SCREW DOWN CROWN INSTRUCTIONS)
Note: The day changes every 24 hours automatically
during the period from about 1.00am to 3.00am.
To set the date:
1. Make sure your watch is completely dry
2. For gents and Waverider styles only, unscrew the crown
(see SCREW DOWN CROWN INSTRUCTIONS), for all
other styles go to step 3
3. Pull the crown out to position ‘B’
4. Turn the crown clockwise to correct date
5. Push the crown back to position ‘A’, or
11
6. Screw the crown back to its original position
(see SCREW DOWN CROWN INSTRUCTIONS)
HANDLING OF WATER RESISTANT WATCHES
Note: The date changes automatically every 24 hours
Note: No backward hand or date adjustments should be
made with analogue hands between 8pm and 3am. At
these times, the gears are too close together and such a
change could cause damage.
Water resistancy of your watch is greatly affected by the way the watch is treated – misuse will diminish water
resistancy by affecting the case and lens seals
- Although the watch is warranted to the specifications
marked, all care should be taken to avoid damage that
results from mishandling
- Should your watch have a screw down crown, you must
ensure that the screw lock crown is completely tightened
at all times
- If the watch comes into contact with salt or chlorinated
water, be sure to rinse it thoroughly in fresh water
- If a watch is wet, do not store it in a closed container.
It should be dried out immediately to avoid damage to
internal components
- Should water or condensation appear in the watch,
immediately have it serviced by those listed on your
warranty as water can corrode components
12
13
- Pressure in bar (ATM) is a test pressure. This
measurement should not be considered as actual
immersion depth. As various conditions in beach surf
may cause false pressure conditions
- The dial marking indicated (ATM, M or BAR) represents
the tested pressure
Note: Designa Accessories assumes no responsibility
for any loss or claims by third parties that may arise
through the use of this watch.
14
MAXUM WATCH CARE AND PRECAUTIONS
• Avoid leaving your watch in any extremes for long
periods of time: direct sunlight, extremely warm or cold
conditions
• Only use your watch for approved sports as detailed in
the ‘WATER RESISTANCY USAGE GUIDE’ on pages180-181
(Avoid wet conditions unless your watch is suited for
them)
• Never operate the buttons or crown when the watch is
wet or submerged in water
• Light activities will not affect your watch, but drops or
hits against a hard surface will cause damage, not only to
the lens, case and band but to the internal components
• Do not expose the watch to solvents, mercury,
cosmetic spray (eg. Hairspray and perfume), detergents,
adhesives, paints, gases or other chemicals. They may
cause discolouration and deterioration to the finish of
the watch
• Do not under any circumstances wear your watch in
a hot tub, sauna, shower or bath. The combination of
15
extreme heat and water may cause your watch to lose its
water resistancy
• Ensure that watches marked as water resistant are
thoroughly rinsed in fresh water after use in salt and/or
chlorinated water and dried with a soft cloth
• The watch and bracelet/band may collect dust and
perspiration and will become soiled if not cleaned
regularly. This is particularly the case with the inner parts
of the links or mesh of the bracelet. Wipe periodically
with a soft dry cloth
• No backward hand or date adjustments should be made
with analogue hands between 8pm and 3am. At these
times, the gears are too close together and such a change
could cause damage. Eg. Daylight savings time
• Avoid fastening the bracelet too tightly. You should be
able to insert a finger between the band and the wrist
(make sure the wrist is at normal temperature and not
overheated)
changed by Designa Accessories technicians
• Avoid exposing your watch to extreme temperatures
• Should moisture appear inside the watch, have it
checked by Designa Accessories technicians
• Avoid magnetic fields as they may effect the time
keeping of your watch.
• Do not clean watch with spray cleaners, thinners or
other such volatile agents
• Never try to open the watch. Only have batteries
16
17
MAXUM WATER - WATER RESISTANCE
Maxum watches are tested to the highest industry
standards for water resistance.
Due to the fact that Surfing and Fishing are in no way
static sports there are influences that can affect a watch’s
ability to keep water out. For example, frequent temperature changes, salt water and big wipe-outs can diminish
the longevity of the watch’s rubber seals.
Note: All industry standard watch testing is done in a
static laboratory environment and relates to pressure.
It does not signify a specific diving depth (see ‘WATER
RESISTANCY USAGE GUIDE’ for more information).
To keep your watch in peak condition for surfing/fishing,
we recommend that you have your watch seals replaced
and fully tested at the Designa Accessories Service Centre
every 24 months (see Warranty Book for contact details).
WATER RESISTANCY USAGE GUIDE
* Water resistant casing does not permit pusher or button
operation while in water.
18
19
www.maxum.com.au
20
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising