Specifications

Specifications
mr.steam
®
The iButler Package
We’ve made it easy to choose the right
Mr.Steam® system for your lifestyle.
Technical Specifications
From Bathroom to Spa
iSteam Ccntrol
The Mr.Steam iButler Package combines some of the
best Mr.Steam controls and accessories. Mr.Steam offers
two iButler Packages, depending on the steam generator
model selected.
All iButler Packages include an iSteam® Control
available in white or black.
iSteam Steamhead
iBUTLER PACKAGE 1
Suitable for models MS90E through MS SUPER 3E
steam generators:
(1) iSteam® Control
(1) AromaSteam Steamhead
(1) AutoFlush® System
(1) iGenie™ Control
(1) Drip Pan
AutoFlush System
iBUTLER PACKAGE 2
Suitable for models MS SUPER 4E through
MS SUPER 6E steam generators:
(1) iSteam® Control
(2) AromaSteam Steamhead
(2) AutoFlush® System
(1) iGenie™ Control
(2) Drip Pan
iGenie Control
Drip Pan
NOTE: FOR ILLUSTRATIVE PURPOSES ONLY.
IMPORTANT: See the Mr. Steam Installation, Operation and Maintenance
Manual, PUR 100472 for details.
Click here to download this manual:
http://www.mrsteam.com/support/downloads.html
mr.steam
®
Sussman-Automatic Corp® hello@mrsteam.com www.mrsteam.com
43-20 34th Street, Long Island City, NY 11101 tel: 1 800 76 STEAM fax: 718 472 3256
9410 S. La Cienega Blvd. Inglewood CA 90301 tel: 1 800 72 STEAM fax: 310 216 2944
PUR TS0013 REV 6.13
mr.steam
®
Technical Specifications
iSteam Control
®
Box Contents:
• iSteam® Control
• Owner’s Manual
• Control Cable (30 ft.)
• Rough-In Box
• Steamhead
• Optional Surface
• Tube of Silicone
Sealant Mount Gasket
Dimensional Information
6 5⁄16”
13⁄8”
Control
Pigtail (8”)
ID Tag
10:06 AM
4 3⁄4”
START
ACCESSORIES
SETTINGS
Red Cap
Audio Pigtail
(71⁄4”)
Wall location for
optional surface mount
Wall location
for flush mount
iSteam controls flush mount in the steam/shower enclosure
through a 5-1/4” wide x 3-9/16” high hole. iSteam controls
can also be surface mounted. They are suitable for use with
an available iGenie™ control. Available in black or white.
The iSteam controls are designed to be installed inside or
outside the steam room but is primarily installed inside the
steam room. If the control is installed inside the steam room
the control must be located:
• 4-5 feet above the floor
iSteam controls are suitable for use inside or outside the
steam/shower enclosure, featuring:
• Full color LCD touch screen
• Programmable temperature
• Programmable time
• In a location representative of the desired steam bathing
temperatures near the bather seating area. Do not locate
the control above or near the steam head or direct steam
emissions.
• On a vertical wall
• Two user presets
• Control AromaSteam, ChromaSteam® and AudioWizard™
• Passcode to prevent unintentional use of steam bath
• Includes AromaSteam steam head in white or black
• Compatible with iGenie™
The control cable length is 30 feet. Insure that the control
and/ or steam generator are located accordingly. If the control is installed outside the steam room a Remote Temperature Probe Part Number iMSTS must be installed inside the
steam room.
• Low voltage operation
NOTE: FOR ILLUSTRATIVE PURPOSES ONLY.
IMPORTANT: See the iSteam Control Installation, Operation and Maintenance Manual, PUR 100477 for details.
Click here to download this manual: http://www.mrsteam.com/support/downloads.html
mr.steam®
Sussman-Automatic Corp® hello@mrsteam.com www.mrsteam.com
43-20 34th Street, Long Island City, NY 11101 tel: 1 800 76 STEAM fax: 718 472 3256
9410 S. La Cienega Blvd. Inglewood CA 90301 tel: 1 800 72 STEAM fax: 310 216 2944
PUR TS0001 REV 6.13
mr.steam
®
Technical Specifications
iGenie
™
BOX CONTENT
• iGenie™
• iGenie Wall Mount
• Interface Module
• 5 ft. Module Connection Cable
• 2 Module mounting Screws
• Installation and Operation Instructions
iGENIE INTERFACE
MODULE INSTALLATION
• Connect the iGENIE INTERFACE MODULE to the
generator by plugging in the provided 5 foot
cable to the iGENIE INTERFACE MODULE and
the Steam Genie connector on the side of the
generator as shown.
• Mount the IGENIE INTERFACE MODULE in a dry,
indoor location. For maximum range, the Steam
Genie Interface Module should be mounted as
high as practical and away from metal that could
effect the radio signal. Securing it to a nearby
wood stud is ideal. The antenna should be pointing upwards.
iGENIE OPERATION
• When the Steam Genie FOB light is off, press the
button once and the Steam Genie FOB light indicates if the steam is on or off. When you press the
button, the light will momentarily twinkle between red and green. A red light indicates that
the steam is off and a green light indicates that
the steam is on.
• To turn the steam on or off, press the ON/OFF
button again while the light is illuminated. After a
short delay the light will change from red to
green (steam on) or green to red (steam off).
mr.steam®
NOTE: FOR ILLUSTRATIVE PURPOSES ONLY.
IMPORTANT: See Mr.Steam® Steam Genie Installation, Operation and Maintenance Manual, PUR 100449, for details.
Click here to download this manual:
http://mrsteam.com/products/technical-downloads.html
Sussman-Automatic Corp® hello@mrsteam.com www.mrsteam.com
43-20 34th Street, Long Island City, NY 11101 tel: 1 800 76 STEAM fax: 718 472 3256
9410 S. La Cienega Blvd. Inglewood CA 90301 tel: 1 800 72 STEAM fax: 310 216 2944
PUR TS002 5.13
mr.steam
®
Technical Specifications
AutoFlush
®
AutoFlush Shown Fully Assembled
Box Contents
• AutoFlush Valve with Cord
• Installation instructions
Operation
The optional AutoFlush System feature automatically drains the
Mr.Steam® system following each use.
A time delay allows the water to cool
down (about two hours) before it
drains by gravity for a safe and gentle
operation.
Note: If the Express Steam® option
has been installed, the AutoFlush will
drain for ten minutes then refill with
fresh water to begin the pre-heat
cycle.
AutoFlush Valve
Steam Generator
Drain Valve
DO NOT TURN OR REMOVE THE DRAIN VALVE
(shown in the correct open position)
Nipple
Plumb to
Drain Line
Our exclusive AutoFlush® automatically and electronically drains the system,
providing CleanSteam... Every Time® and introduces fresh water.
NOTE: FOR ILLUSTRATIVE PURPOSES ONLY.
IMPORTANT: See the Mr. Steam Installation, Operation and Maintenance Manual, PUR 100472 for details.
Click here to download this manual: http://www.mrsteam.com/support/downloads.html
mr.steam
®
Sussman-Automatic Corp® hello@mrsteam.com www.mrsteam.com
43-20 34th Street, Long Island City, NY 11101 tel: 1 800 76 STEAM fax: 718 472 3256
9410 S. La Cienega Blvd. Inglewood CA 90301 tel: 1 800 72 STEAM fax: 310 216 2944
PUR TS00011 REV 6.13
mr.steam
®
Technical Specifications
Drip Pan MS 103867
Mr. Steam strongly recommends the use
of a drain pan in the unlikely event of a
plumbing leak.
Locate the drain pan on a solid level surface and place the steam generator inside
the drain pan. Insure the steam generator
is level.
All plumbing shall be performed by a
qualified licensed plumber and in accordance with applicable national and local
codes. Check local plumbing code for
receptor, trap and vent requirements.
Drain pans drain by gravity.
The drain pan is equipped with an integral
3⁄4" NPT fitting.
9”
25”
1.5”
NOTE: FOR ILLUSTRATIVE PURPOSES ONLY.
IMPORTANT: See the Mr. Steam Installation, Operation and Maintenance Manual, PUR 100472 for details.
Click here to download this manual: http://www.mrsteam.com/support/downloads.html
mr.steam
®
Sussman-Automatic Corp® hello@mrsteam.com www.mrsteam.com
43-20 34th Street, Long Island City, NY 11101 tel: 1 800 76 STEAM fax: 718 472 3256
9410 S. La Cienega Blvd. Inglewood CA 90301 tel: 1 800 72 STEAM fax: 310 216 2944
PUR TS0012 REV 6.13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising