1708CAB - Datasheet - SAE J1708 Data Interface Cable

1708CAB - Datasheet - SAE J1708 Data Interface Cable
1708CAB 1208ds-1/1
© 2008 by B&B Electronics. All rights reserved.
PRODUCT INFORMATION
1708CAB
SAE J1708 Data Interface Cable
Make the connection to J1708 data bus systems using the
popular 6-pin Deutsch connector with the 1708CAB interface
cable. This six foot, 22 AWG shielded cable is terminated
with a six contact circular socket. The Data A, Data B and
Ground conductors are stripped and tinned at the opposite
end for easy connection to Model 232SAER which converts
the J1708 data to the RS-232 standard. The remaining three
connections are included in the cable, but cut flush with the
insulation.
Vehicles may provide a voltage on Pin C (red wire) of the
connector. Note that, if this wire is connected to the +12V
power input on the Model 232SAER or J1708P1, the voltage
must not exceed 16 volts otherwise the 232SAER or J1708P1
will be damaged.
Function
Data A (+)
Data B (-)
Ground
V + (9-32 volts)
No standard function
No standard function
Wire Color
Orange
Yellow
Black
Red
Green
Brown
Pin
A
B
E
C
D
F
B
F
A
E
C
B&B ELECTRONICS
RS-232
Model 232SAER
SAE J1708
Orange
D
Yellow
Black
View into 1708CAB Connector
Shield (drain wire)
1708CAB Connections to the 232SAER or J1708P1
International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA
815-433-5100 Fax 433-5104 www.bb-elec.com orders@bb-elec.com support@bb-elec.com
European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland
+353 91 792444 Fax +353 91 792445 www.bb-europe.com orders@bb-europe.com support@bb-europe.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising