arcmaster
ARCMASTER
®
Industrial Portable Welding
Power Sources
U.S. Customer Care: 800-426-1888
Canada Customer Care: 905-827-4515
International Customer Care: 940-381-1212
ARCMASTER
®
Industrial Portable Welding
Power Sources
Tweco.com
page 2
The Tweco® ArcMaster® 220 ACDC, 301 ACDC, 401S and 401MST
family of portable industrial welding equipment has been
completely overhauled, re-engineered and expanded following
extensive research and development activities. We have rebuilt our
range to ensure products meet your requirements and expectations
for outstanding performance, reliability and durability.
We distinguish ourselves from our competition through superior
featured, dependable products, technical innovation and
excellence in customer service and technical support.
Our upgraded ArcMaster industrial portable range is proof of this
commitment to deliver quality equipment that does the job and
exceeds expectations. A wealth of features and options make Tweco
ArcMasters the perfect choice for the serious welding professional.
Designed for industrial use; the ArcMaster range is lightweight for
portability from job site to job site. The compact size ensures the
minimum footprint in the shop where space is limited and suits
well for use with 4, 6 or 8 pack racks. The ArcMaster’s metal design
with lifting handle guarantees durability and portability in the most
rugged environments.
APPLICATIONS
•Industrial Fabrication
•Petro / Chemical Fabrication
•Power Generation Plants
•Industrial Aluminum Fabrication
•Stainless Steel & Sanitary Pipe Fabrication
•Maintenance & Repair
•Shipboard Installation & Repair
U.S. Customer Care: 800-426-1888 • Canada Customer Care: 905-827-4515
International Customer Care: 940-381-1212
page 3
ARCMASTER 220 ACDC
®
AC/DC HF TIG/STICK
Part No. W1009300
• 220 Amps
• 208-230/400/460 VAC Input
• Single/Three Phase
• Less than 30 lbs
Machine Features:
•AC and DC output for aluminum and non-ferrous alloys,
stainless, mild steel & chrome molys.
•Process Selection between TIG or Stick.
•AC Frequency: Adjustable frequency of the AC square wave
when welding on aluminum for optimized set up.
•Wave Balance: Adjustable for optimized penetration or
cleaning action when welding on aluminum.
•Pulse: Changes the weld current from high to low at a
specified frequency, reduces heat input on thin material.
•Preflow & Postflow: Enables independent control over
shielding gas before and after the weld.
•Initial Current / Upslope / Downslope & Crater modes:
Eliminates blow holes on starting and cracking at the end
of the weld.
•HF Arc Start: Provides non-contact arc starting that
eliminates tungsten or material contamination.
•Lift TIG Start: Provides optimized TIG arc starting without the
use of high frequency.
Tweco.com
page 4
ARCMASTER 301 ACDC
®
AC/DC HF TIG/STICK
Part No. W1009400
• 300 Amps
• 208-230/400/460 VAC Input
• Single/Three Phase
• Less than 36 lbs
•Digital Meters: Voltage and Amperage; Preview and hold
capability for easy set up.
•Trigger Hold: 4T (Latch) eliminates operator fatigue.
•Spot Mode: Enables timer functions for consistent spot welds.
•Gas Purge: Ensures gas lines are purged at start of weld.
•Overload Protection: Shuts down the power source to protect the
internal electrical components from overheating.
•Tiptronics Job Save: Save up to 100 parameter application
settings for quality repeatable welds.
•Tungsten Size: Select tungsten size for optimum starting
performance.
U.S. Customer Care: 800-426-1888 • Canada Customer Care: 905-827-4515
International Customer Care: 940-381-1212
•Excellent Portability: Small size and weight ensures best
workspace footprint and job site portability.
•Meets IP23S Standards: Suitable for outdoor use.
•Approvals: IEC 60974-1, CSA E60974-1, UL 60974-1.
page 5
ARCMASTER 401S
®
STICK/LIFT TIG Part No. W1009100
•CC, DC, Stick / Lift TIG / Carbon Arc Gouging
•Process Selection between Stick and Lift TIG
•Remote Receptacle: Allows remote devices
to be connected for controlling amperage and
output contactor.
•Digital Amp Meter: Preview and hold capability for
easy set up.
Machine Features:
•400 Amps of maximum output: Suitable for Carbon Arc
Gouging up to ¼” carbons.
•208-230/400/460 VAC Input: Plug and play, no voltage
changeover required.
•Single/Three Phase: For ultimate input voltage flexibility.
•Excellent E6010 electrode (cellulose) performance.
•Adjustable Hot Start and Arc Force for optimum Stick
electrode performance.
•Excellent Portability: Small size and weight ensures
best workspace footprint and job site portability, less than
41 pounds.
•Remote Contactor Function: Enables remote contactor ON/OFF.
Tweco.com
page 6
ARCMASTER 401MST
®
MIG/STICK/LIFT TIG Part No. W1009500
•CC/CV, DC, MIG / Stick / Lift TIG / Carbon Arc Gouging
•Process Selection between MIG, Stick and Lift TIG
•Remote Receptacles: Allows remote devices to be connected
for controlling amperage, output contactor and wire feeder.
•Digital Volt/Amp Meters: Preview and hold capability for
easy set up.
•Job Save: Save up to 5 parameter application settings
for quality repeatable welds.
•Adjustable Inductance Control: For arc stability and
spatter control.
•Lift TIG Start: Provides optimized TIG arc starting without the use of
high frequency.
•Overload Protection: Shuts down the power source to protect the
internal electrical components from overheating.
•Meets IP23S Standards: Suitable for outdoor use.
•Approvals: IEC 60974-1, CSA E60974-1, UL 60974-1.
U.S. Customer Care: 800-426-1888 • Canada Customer Care: 905-827-4515
International Customer Care: 940-381-1212
page 7
Which ARCMASTER is Best for You?
®
SELECtion
COMPARISON
SPECIFICATIONS
Type:
ARCMASTER 220 ACDC
ARCMASTER 301 ACDC
ARCMASTER 401S
ARCMASTER 401MST
AC/DC, CC
AC/DC, CC
DC, CC
DC, CC/CV
HF TIG (GTAW)
Lift TIG (GTAW)
Stick (SMAW)
HF TIG (GTAW)
Lift TIG (GTAW)
Stick (SMAW)
Stick (SMAW)
Lift TIG (GTAW)
Air Carbon Arc Gouging (CAG)
MIG (GMAW)
Flux Cored (FCAW)
Stick (SMAW)
Lift TIG (GTAW)
Air Carbon Arc Gouging (CAG)
220 Amp
300 Amp
400 Amp
220A @ 40% Duty Cycle
180A @ 60% Duty Cycle
160A @ 100% Duty Cycle
170A @ 40% Duty Cycle
140A @ 60% Duty Cycle
120A @ 100% Duty Cycle
300A @ 35% Duty Cycle
220A @ 60% Duty Cycle
180A @ 100% Duty Cycle
200A @ 60% Duty Cycle
170A @ 100% Duty Cycle
400A @ 25% Duty Cycle
300A @ 60% Duty Cycle
200A @ 100% Duty Cycle
400A @ 25% Duty Cycle
300A @ 60% Duty Cycle
200A @ 100% Duty Cycle
3 - 220 Amp
10- 170 Amp
5 - 300 Amp
10- 200 Amp
5 - 400 Amp
5 - 400 Amp
65 VDC
3 Years*
65 VDC
3 Years*
65 VDC
3 Years*
400 Amp
400A @ 25% Duty Cycle
300A @ 60% Duty Cycle
200A @ 100% Duty Cycle
400A @ 25% Duty Cycle
300A @ 60% Duty Cycle
200A @ 100% Duty Cycle
400A @ 25% Duty Cycle
300A @ 60% Duty Cycle
200A @ 100% Duty Cycle
5 - 400 Amp
5 - 400 Amp
5 - 400 Amp
5 - 36 Volt
65 VDC
3 Years*
Approvals
IEC 60974-1, CSA E60974-1,
UL 60974-1
IEC 60974-1, CSA E60974-1,
UL 60974-1
IEC 60974-1, CSA E60974-1,
UL 60974-1
IEC 60974-1, CSA E60974-1,
UL 60974-1
Protection Class
IP23S
IP23S
IP23S
IP23S
Power Source Dimensions:
(H x W x D)
12.8" x 7.3" x 19.0"
(326 mm x 185 mm x 483 mm)
12.8" x 7.3" x 19.0"
(326 mm x 185 mm x 483 mm)
15.7" x 7.3" x 20.3"
(400 mm x 185 mm x 515 mm)
15.7" x 7.3" x 20.3"
(400 mm x 185 mm x 515 mm)
Power Source Weight
29.5 lb (13.4 kg)
35.9 lb (16.3 kg)
40.9 lb (18.6 kg)
40.9 lb (18.6 kg)
Primary Voltage
Supply Voltage Range
Number of Phases
Supply Frequency
Rated kVA @ 220 Amp
Maximum Input Current
208-230/400/460 VAC
187 - 506 VAC
Single/Three Phase
50/60 Hz
6.0 kVA
23.5 Amp
208-230/400/460 VAC
187 - 506 VAC
Single/Three Phase
50/60 Hz
16.0 kVA
17.1 Amp
208-230/400/460 VAC
187 - 506 VAC
Single/Three Phase
50/60 Hz
24.0 kVA
27.8 Amp
208-230/400/460 VAC
187 - 506 VAC
Single/Three Phase
50/60 Hz
24.0 kVA
27.8 Amp
Ordering Information
Part No: W1009300:
ArcMaster 220 ACDC
Power Supply
Part No: W1009400:
ArcMaster 301 ACDC
Power Supply
Part No: W1009100:
ArcMaster 401S
Power Supply
Part No: W1009500:
ArcMaster 401MST
Power Supply
Processes:
Maximum Output
MIG (GMAW) Welding Output
@ 104°F (40°C)
TIG (GTAW) Welding Output
@ 104°F (40°C)
STICK (SMAW) Welding Output
@ 104°F (40°C)
Current Range: MIG
TIG
STICK
Voltage Range: MIG
Nominal OCV Volt
Warranty Period
Primary Power
* Limited Warranty, refer to warranty schedule.
TECHNOLOGIES™
U.S. Customer Care: 800-426-1888
Form No. 84-1318 (4/23/14)
I n n o vat i o n t o S h a p e t h e W o r l d ™
•
Canada Customer Care: 905-827-4515
© 2014 Victor Technologies International, Inc.
•
International Customer Care: 940-381-1212
VictorTechnologies.com
Printed in U.S.A.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement