smart dustmonitoring solutions

smart dustmonitoring solutions
 ForSimultaneousPMFractionDustMonitoring
SMART DUSTMONITORING SOLUTIONS
The Industry Standard in Real-Time Dust Monitoring
TSI’S TRIPOD BASED SYSTEMS ARE SIMPLY THE SMARTEST
AND MOST COST EFFECTIVE SOLUTION FOR COMPANIES
WANTING TO UNDERTAKE REAL-TIME LASER BASED DUST
MONITORING. UNLIKE OLDER STYLE GRAVIMETRIC DUST
MEASURING INSTRUMENTS (HIGH VOLUME SAMPLERS,
TEOM, DEPOSITION GAUGES), TSI SYSTEMS PROVIDE
TRUE REAL-TIME PARTICLE BY PARTICLE MEASUREMENTS
ENABLING COMPANIES TO MONITOR EXACTLY WHAT’S
HAPPENING IN THE AIR ON ANY SITE AT ANY TIME.
There is no need to collect filter samples and take them off to labs for
analysis. There is no need to rely on costly air monitoring stations that are
insensitive to potentially dangerous ultra-fine dust and only give 5 to 15
minute averages at best. Proper real-time monitoring using professional TSI
systems give companies the ability to take control and make changes to
processes if necessary.
Collecting dust in primitive deposition gauges using older style power
hungry and bulky high volume samplers (which still only collect filter
samples) or using expensive mains powered TEOM style instruments which
require air conditioned enclosures, is a thing of the past. None of these
methods can provide the true real-time and dynamic data that TSI DustTrak
based systems provide.
Collecting filter samples alone can’t possibly help companies understand
what is truly happening on their site day to day. If companies can’t properly
measure what is going on, how can they hope to control potentially
dangerous dust and other aerosols on their sites?
These smart, efficient, compact TSI systems even allow the end user to
collect a 37mm filter sample for later chemical or gravimetric analysis. They
require very little maintenance when compared to many other sampling
methods, can operate off batteries, mains or solar panels. They can be
tripod based or fixed in position almost anywhere. The monitor may also be
removed and used as a portable survey tool, which is an added bonus for
many companies.
There are countless options and accessories to choose from. These include
solar panels, SMS messaging on high dust alarms and system faults,
telemetry back to base using the 3G / NEXTG network, RF or satellite and
web based data collection from as little as $20 per month using Kenelec
Scientific automated web servers.
With over 30 popular systems to choose from and thousands of DustTrak
systems and instruments now sold in Australia, TSI is the first choice for
quality conscious companies wanting smart and reliable dust monitoring
solutions. TSI’s tripod based systems can operate off batteries, solar panels
or mains providing maximum flexibility for companies on any site.
TSI 8533 STANDARD TRIPOD BASED SYSTEM
WITH SMS MESSAGING & FULL 3G & WEB REMOTE ACCESS
Standard Features Included














0.1um to 15um wide particle size range
0.1um to 500um particle size sensitivity range
0.001 to 150mg/m3 particle dust concentration range
Measures PM1, PM2.5, PM4 & PM10 and Total PM size fractions
(simultaneously)
Uses combined photometry and optical particle counting
0.001 mg/m3 high resolution results
3 lpm flow rate (variable from 1.4 to 3 lpm)
Built-in 60,000 point data logger (once a minute for 45 days)
Built-in pump designed for both portable & continuous use
3.5 inch VGA colour touch screen display
Fully menu driven real-time graphical display
37mm filter sample collection for later analysis
Patented sheath air system & recessed optics
15 minute average STEL alarms
Enhanced Features Included













Built-in water trap with optional larger water trap available
Optional heated inlet available
CSIRO designed heat shield for cooler field operation
Full auto zeroing to prevent drift due to temperature
Operates for up to 50 hours off internal enclosure batteries
Includes 4 batteries, 2 for operation and 2 spare for charging
Easily upgradeable to operate off solar panels
Easily upgradeable for SMS messaging & remote data access
Enclosure may be removed from tripod and fixed in position
Fully NIOSH 5040 compliant sampling
Upgradeable to incorporate weather & gas sensors
Can be calibrated to detect any aerosol or dust
Drop down menu to switch between dust calibration sets
Service, Support & Calibration




Fully serviced and supported in Australia by Kenelec Scientific
Fully calibrated both optically and electronically to ISO12103-1
international standards by Kenelec Scientific
Kenelec Scientific is Australia's leading NATA accredited and fully
ISO21501 compliant NATA calibration laboratory
Lifetime FREE technical support
SMART DUSTMONITORING SOLUTIONS
Communications
•
USB 2 interface for PC connection and manual data download
•
Data dump straight to any USB flash drive
•
Field programmable firmware updates (all models)
•
Ethernet port for remote control and access to data
Smart Modular Design
Unlike any other dust system on the market, TSI systems are highly modular.
They can be expanded, upgraded and modified to suit the changing needs of our clients
very efficiently and at minimal cost. Clients can even remove the primary measuring
instrument and use it as a battery powered portable device to do survey work around any
site, collecting both real-time data and a 37mm filter sample.
Outputs & Alarms
•
Internal audible & visual alarms to warn users
•
0 to 5 VDC or 4-20mA (user selectable)
•
Fully user selectable scaling range
•
Relay contact closure for local alarms, lights, buzzers etc
•
Local warning lights and sirens available (optional)
•
SMS messaging on alarms on SMS & remote capable systems
Dust Specific Calibrations
Another unique and popular feature is the ability to calibrate TSI systems for any
specific aerosol / dust. This gives end users the ability to hone in on specific types
of problem dusts on any site. This combined with manual or auto zeroing enables
highly accurate results, within 1ug/m3.
Weather & Environmental
All systems can easily be supplied with, or upgraded to, accept weather sensor
data or data from any water, gas or environmental monitoring instruments.
Telemetry & Data Access Options
•
Manual download using any USB flash drive
•
3G / NEXTG mobile network data access capabilities
•
RF telemetry of data back to base
•
Satellite telemetry of data back to base
•
Full data access using internet & web browser
•
Internet data collection plans available from only $20 per month
SPECIFICATIONS
Environmental Enclosure
Physical
Enclosure style
Dimensions
Weight with batteries
TSI 8535 standard
21 x 43 x 52 cm
17kg
Internal Battery System
4 x 12 volt, 21 Ah lead acid batteries. 2
batteries in use and 2 being charged. 2
batteries provide around 50 hours of field
use.
TSI Model 8533 DustTrak. Swappable
with other TSI models for single or
simultaneous PM fraction monitoring
5MB of onboard memory (60,000 data
points) providing logging once a minute
for 45 days.
Operates internal enclosure batteries for up
to 50 hours, 240 VAC or solar panels (if
fitted).The internal monitor also operates
off its own internal batteries if used as a
portable survey tool.
Primary Sensing Device
Photometer & optical particle counter
Up to 64GB data storage for systems
fitted with companion data loggers for
SMS and remote data access
Sensor Type
Particle Size Range
0.1um to 15 μm
Time Constant
3.0 L/min set at factory, 1.40 to 3.0 L/min,
user adjustable
Flow Accuracy
±5% of factory set point, fully internal flow
controlled
Dust Concentration Range
0.001 to 150 mg/m3
Measurement Resolution
±0.1% of reading or 0.001 mg/m3,
whichever is greater
Zero Stability
+0.001 mg/m3 per °C
Internal Display
5.7 inch VGA touch screen
1 second to 1 hour, user adjustable
Flow Rate
Temperature Coefficient
Logging Interval
0.1um to 500um
±0.002 mg/m3 per 24 hours at 10 sec
time constant
Secondary Data Storage
6.3 kg weight
Heavy duty hardwood construction
Flat head with screw clamps
Entendable height from 1.1m to 1.7m
Primary Data Storage
0 to 36 kph wind speed
0 to 50 degree C temperature
-20 to 60 degree C storage
Transportable Tripod
Particle Size Sensitivity
Standard Inclusions
Optimal Sampling Conditions
TSI 8535 environmental enclosure with
tripod mount, heat shield, 360 degree
sampling inlet, water trap bottle, internal
mounts, tubing, O-rings, external AC power
cord and general accessories.
Measurement Device
1 second to 60 seconds
Operational Conditions
0 to 95% RH, non condensing
0 to 50 degree C temperature range
-20 to 60 deg C storage temperature
Gravimetric Sampling
Capable of collecting a 37mm filter
sample using the removable 37 mm
cartridge (user supplied)
NIOSH 5040 Capable Sampling
Yes, with user adjustable flow rate
Sheath Air System
Patended sheath air system and
recessed optics to keep the optics clean
during sampling
Specifications are subject to change without
notice. TSI, the TSI logo, DUSTTRAK, and
TRAKPRO are trademarks of TSI Incorporated.
Microsoft and Windows are trademarks of
Microsoft Corporation
#
Power Requirements
CE Rating
Immunity EN61236-1:2006
Emissions EN61236-1:2006
Included System Components
TSI 8533 DustTrak Monitor
TSI 801690 Auto Zero Module
TSI 8535 Environmental Enclosure
TSI 801810 Heat Shield
4 x 21Ah Batteries & Charger
Enhanced Data Logger & Software
3G / NEXTG Modem
Heavy Duty Tripod
Optional Accessories
Solar power system
SMS messaging on alarms module
3G / NEXTG mobile access module RF
telemetry data access upgrade Satellite
telemetry data access upgrade Heated
inlets
Diffusion Dryers
Weather stations and sensors
Filter cassettes and media
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising