Nieco Models 824/850 Specification Sheet

Nieco Models 824/850 Specification Sheet
ITEM NO. AIA 11400
A U T O M AT I C
MODELS 824/850 G & E
High volume operators will find
the 800 series broilers to be the
right choice for cooking delicious
flame broiled hamburgers and
chicken sandwiches.
B R O I L E R
F E AT U R E S
Single Pilot Ignition
Split Bun Grilling Platen
Flow-through Operation
Side Burner Access Panel
Automatic Temperature Control
OPTIONS
ACCESSORIES
Spare Motor
Spare Parts Kit
Quick Disconnect Gas Hose
(where permitted)
Pre-mounted SCR (Model 824 only)
B E N E F I T S O F A U T O M AT I O N :
Consistency
Versatility
Speed
Quality
Flexibility
T H E N I E C O A D VA N TA G E
All Nieco equipment is backed by a worldwide sales and service network, with local
parts inventories and 24-hour emergency
service. Included in the price of the Nieco
Broiler is a visit by an authorized distributor representative to start-up the broiler,
activate the warranty and train the store
personnel on cleaning and operating the
broiler.
N I E C O C O R P O R AT I O N
7950 Cameron Drive
Windsor, CA 95492
707.284.7100
Fax 707.284.7430
www.nieco.com email: sales@nieco.com
Re-order P/N 9999-18B
10/01
A P P R O VA L S :
D I S T R I B U T E D B Y:
MODELS 824/850
Broil Belt Extension
Dual Broil Belts (Model 850)
Natural or Propane Gas, Electric
A U T O M AT I C B R O I L E R
Models 824/850 G & E
DIMENSIONS
Length
Height
Width
INCH
MM
44 3/32
29 7/32
36 3/4
1120
742
933
ENERGY - GAS MODELS
Gas connection 3/4” N.P.T.
Electrical connection (specify exact voltage)
Domestic
208-240Y120V IØ 50/60Hz 18A
Export
200-240V IØ 50/60Hz 18A
Natural Gas
BTU/hr
kW
3” W.C.
77,000
22.6
5” W.C.
100,000
29.4
Liquid Propane
BTU/hr
kW
8” W.C.
81,000
23.8
11” W.C.
95,000
27.8
ENERGY ELECTRIC MODELS
Electrical Connection (specify exact
Domestic
208Y120V
240Y120V
Export
380Y220V
415Y240V
voltage)
3Ø 50/60Hz
3Ø 50/60Hz
3Ø 50/60Hz
3Ø 50/60Hz
WEIGHT
LB
KG
Shipping
575
260
EXHAUST
CFM
CMH
Typical
800
1360
B I D D I N G I N F O R M AT I O N
Nieco Models 824 or 850, using infrared heating
and a continuous chain conveyor. Broiler shall
be constructed of stainless steel frame with
stainless steel enclosure panels.
N I E C O C O R P O R AT I O N
7950 Cameron Drive
Windsor, CA 95492
707.284.7100
Fax 707.284.7430
www.nieco.com email: sales@nieco.com
Re-order P/N 9999-18B Printed in the USA
© 2001 Nieco Corporation
69A
71A
39A
39A
Gas Models 824G or 850G, with Automatic
Temperature Control, shall be gas fired, infrared
and manufactured to operate on Natural Gas at
3” W.C. or 5” W.C., or Liquid Propane at 8” W.C.
or 11” W.C., at the factory. Broiler shall have 6
burners - 3 on top and 3 bottom - with side
access for lower burner removal.
Electric Models 824E or 850E, with Broil
Stabilizer Control, shall be all-electric utilizing
12 infrared electric broil elements - 6 top and 6
bottom (specify exact power connection).
Export and special power applications available.
Models 850G and 850E shall be equipped with
dual meat belts - specify 12” & 10”, 14” & 8” or
16” & 6” (larger belt on control box side from
feed-end is standard) and a bun toasting section. Broil belts shall be constructed of stainless
steel and supported by non-lubricated bearings.
Bun toasting platens shall be aluminum with
teflon sheets, with a temperature thermostat.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising