Premium Babyproducts
EN 22
Monitor installation
Function buttons monitor - front- and back side
Function buttons monitor - other
Function buttons camera
Connecting camera adapter
Main menu
Camera Pairing
Technical specifications monitor
Technical specifications camera
Congratulations with your brand new Luvion® Baby monitor!
Becoming a mom or dad is one of the most exciting moment in your life.
We do understand that very well. We hope you will enjoy watching your
baby or child grow up on the Luvion® baby monitor.
The Luvion® Baby monitor is very useful when you would like to see and
hear your baby or child. Off course, you can also use the Luvion® baby
monitor for more purposes. You can monitor elder people, pets or your
house(door) as well. In this user manual you find a complete installation
schedule and all specifications of the monitor and camera. Please read
this user manual carefully prior to the use of the Luvion® Baby monitor.
Digital wireless technology provides excellent image quality and clarity.
Interference free, secure and private signal.
Up to 450ft wireless transmission range .
Listen in with exceptional sound clarity.
Safety warning feature notifies you when out of range.
System expandable up to 4 cameras.
Camera features
VGA resolution camera.
Night vision allows for low light viewing up to 15 feet / 4.5 meters.
Built-in microphone.
Camera can be battery operated for true portable wireless operation.
Receiver features
2.4” color LCD monitor/receiver with superior image quality.
Video/Audio output for viewing on TV/Monitor or recording on VCR/DVD recorder.
Rechargeable lithium polymer battery for true portability.
Convenient receiver cradle included.
Audio level indicator and alarm.
The system includes the following components:
We hope that you will enjoy the use of the Luvion® baby monitor.
Luvion® is a supplier of various premium baby products. Based on safety,
design and quality we offer the best products only. We hope to see you
again as a satisfied customer.
Wireless receiver
Receiver cradle
(charging base)
Wireless camera
RCA cable
Check your package to confirm that you have received the complete
system, including all components shown above.
Wireless receiver installation
Functionbuttons front- and backside reciever
Determine if you will be using the receiver cradle, or connecting the cables
directly to the receiver before installation:
Place the receiver cradle or receiver in a place that will have clear
reception with your camera(s).
Plug the AC adaptor power output cable into the 9V POWER input of
the cradle or receiver. Plug the power plug into a wall outlet or surge protector.
Leave the receiver to charge for 6 hours prior to first time use so the built-in rechargeable receiver battery is fully charged. DO NOT remove the power cable from the receiver / from the cradle during initial charge process. After initial charge, charge the receiver as required.
If you wish to view the receiver images on a larger screen, connect the included AV cable to the cradle or receiver, and connect the other end of the cable to the Video IN (Yellow) and Audio IN (White) ports on the TV, VCR or other viewing/
recording device.
NOTE: the purpose of the AV output is for convenience only. When using with large screen TV/Monitor, the picture might be grainy as the camera limits video resolution to VGA (640x480 pixels). This is not a product defect. For best performance use with TV/Monitor PIP (Picture in Picture) function.
Check your TV/Monitor product manual to see if this feature is available on your TV/Monitor. This allows you to view TV or other video source
and see video from the camera in a small window on the same screen.
Viewing Mode:
The following controls are used while watching live video from the camera:
• Press the UP/DOWN  arrows to increase or decrease the volume.
• Press the LEFT  arrow to view cameras in automatic switching mode.
• Press the RIGHT  arrow to manually switch between cameras.
Power/Audio Level LEDs – The green LED indicates the receiver
power is ON or OFF. The red LEDs indicate the audio levels (low to high).
LCD Screen – Displays video from the camera.
Scan Button - When the SCAN button is pressed, the LCD screen is
turned off and the system continuously scans all available cameras
while the monitor is dark. The scan feature can be used for the following two reasons: (1) to prevent the user from being disturbed
(i.e. when sleeping) by the bright LCD screen, or (2) to save battery
power. If audio is detected above the preset audio trigger level on
the camera(s), the receiver will beep and display the triggered camera. The receiver will return to scan mode about 5 seconds after the
alarm has completed. Press any button (except OK button) on the
front panel of the monitor to exit scan mode.
MENU Button – Press to access the receiver menu. Press the button again to exit.
Navigation Controls/OK Button – Use the controls in Viewing Mode and
Menu Mode.
Stand – Flip the stand out to place the receiver on a flat surface (such as a table or countertop). Alternatively, place the receiver in the receiver cradle.
Pair Button - Press the Pair button when pairing the receiver with a camera
(more pairing at the pairing chapter)
Speaker - Produces the sound transmitted from the cameras.
Function buttons edge wireless receiver
Function buttons wireless camera
Night Light Button – Press to turn night light ON or OFF (for the camera currently being displayed on the LCD screen).
Alarm +/- Button – Press to increase or decrease the volume of the audio alarm.
Receiver antenna – Receives & sends signals from or to the cameras.
Antenna Locking Switch – Slide the switch to unlocking position, the
receiver antenna will pop up. Then you can adjust the antenna to
vertical position for better signal reception.
Power Slide Switch – Slide the switch to ON or OFF position to switch
on/off the receiver.
A/V Out Port (Optional Use) – Connect the included A/V cable to view
video from the receiver on a TV or monitor, or record to a DVD recorder or VCR. Alternatively, use the A/V out port on the receiver cradle.
DC 9V Power Input – Connect the included DC 9V power adaptor to power
the receiver and/or charge the receiver battery (when the receiver is not
in the cradle).
A/V Out Port – Connect the included A/V cable to view the receiver picture (when
docked) on a TV or monitor, or record to a DVD recorder or VCR. (NOTE: The A/V
output function will not work if there is no power cable connected to the cradle. Only one A/V out port should be used at a time).
DC 9V Power Input – Connect the DC 9V power adaptor (included) to the
receiver cradle to power the receiver and/or charge the receiver.
NOTE: When the receiver is docked, and the A/V cable is connected (power cable
as needs to be connected), the LCD screen on the receiver will be blacked out.
The LCD screen will turn back on when the A/V cable is disconnected.
Camera Antenna – Sends & receives signals to or from the receiver.
Night Light Switch – Press to turn the night light ON or OFF. Alternatively, press the light button on the receiver to remotely turn the camera light ON or OFF.
Lens/IR LED Cover – Infrared LEDs provide viewing in no/low light conditions.
Microphone – Receives sounds for the area near the camera, and trans
mits sound from the camera to the receiver.
DC 9V Power – Connect the DC 9V power adaptor to the camera. NOTE: The camera can also be powered using 4 AA batteries (not included) installed in the base. If the camera is plugged in with the AC adaptor, the batteries
will not be used. The batteries are intended for short term, portable camera use.
Pair Button – The pair button is located on the back of the camera behind the stand mount.
Sound Alarm Trigger – Adjust the trigger to set the sound alarm sensitivity.
The receiver will beep to alert the user when the sound is above a preset
sound level. Adjust the side wheel to increase or decrease the level.
Camera installation
Connecting wireless camera adapter
Before you install the camera, carefully plan where and how it will be positioned, and where
you will route the cable that connects the camera to the power adaptor. Before starting permanent installation, verify its performance by observing the image on the receiver when
camera is positioned in the same location/position where it will be permanently installed
and the receiver is placed in the location where it will be used most of the time.
The camera can be powered either by using the provided power adaptor, or using
batteries (requires 4 AA type batteries, not included). NOTE: Wireless cameras
require a power source (either an electrical outlet or battery power) to operate.
If you plan to permanently mount the camera in a location, it is recommended to
use the included camera power adaptor to prevent interruptions in the image, as
using battery power is intended as a temporary power solution.
Installation Warnings:
Aim the camera(s) to best optimize the viewing area: Select a location for the
camera that provides a clear view of the area you want to monitor, which is free
from dust, and is not in line-of-sight to a strong light source or direct sunlight.
Avoid installing the cameras with thick walls, or obstructions between the cameras
and the receiver.
Power adaptor
Connect the power adaptor to the camera. Make sure the power adaptor is placed
into a grounded outlet or surge bar to protect the camera from power fluctuations.
Installation of the camera
Carefully unpack the camera.
NOTE: If you are installing cameras that did not come with the system, please
see the camera pairing section of this manual for details on installation.
Mount the camera to the wall. Mark the position of the screw holes on the wall,
and drill holes and insert 2 screws, then firmly attach the camera to the wall by
placing the stand over the installed screws and pushing the base downwards.
Connecting the power adapter to the
9V input on the back of the camera.
NOTE: The camera can also be placed on a flat surface, such as a table or
shelf, and no mounting hardware is required.
Adjust the viewing angle of the camera.
Position the base holes over the
screws. Slide the base down to
lock the base in place.
Remove the battery cover of the base of the camera.
Insert 4 AA batteries (not included) into the Battery Pack. Make sure to cor2
rectly line up the Positive (+) and negative (-) terminals of the batteries.
Place the battery pack cover back on.
NOTE: If the camera is plugged in with the AC adaptor, the batteries will not be
used. The batteries are intended for short term, portable camera use only.
Main menu
Camera Pairing:
The Main Menu contains 4 submenus:
Pairing - Use the pairing menu to add camera(s) to the receiver.
EV - Adjusts the exposure level of the camera.
Power saving - Turns on the receiver power save mode (when no activity on the cameras is detected).
Settings - Sets the AV Out options, and resets the receiver to factory defaults (erases all configurations).
The system comes with camera(s) that have already been paired. These cameras will communicate with the receiver once powered on. The pairing function
assigns each camera to a different channel on the wireless receiver (up to 4
cameras), and is necessary for configuring additional cameras.
Power on the camera by connecting the power adaptor or battery pack, and turning the switch to ON. The power LED for the camera should be ON.
Power on the receiver by connecting the power adaptor to the 9V In-
put on the side.
Press the MENU button on the receiver. Navigate to the Pairing menu option by pressing the  keys to navigate. Press the OK button to open the Pairing menu.
Select a channel by pressing the UP and DOWN  arrows. Press the OK button on the receiver to accept.
Press the Pair button located on the bottom of the
receiver using a pen tip or paperclip.
A message will be displayed on the receiver screen.The receiver will count down from 30~0 – you must press the Pair button on the camera during this time to suc-
cessfully pair the camera. If the button on the camera is
not pressed, the receiver will return to the view screen, and no pairing will take place.
Press the Pair button on the back of the camera. Once the camera has
been paired, it will be immediately viewable on the receiver monitor.
Use the UP  and DOWN  arrows to scroll down the menu buttons.
EV Menu
The EV Menu is used to adjust the exposure of the camera.
Use the LEFT  and RIGHT  arrows to change the bar from DARKEST (left) to LIGHTEST (right). Press the OK button to accept the change.
Power Saving
The Power Saving Menu is used to turn off the screen at a predetermined time, to save battery. This function can be set to 1 minute, 2
minutes, 5 minutes, 10 minutes, or disabled by selecting cancel. The
monitor will go to black screen to save battery after the time you have
set (1minute, 2 minutes, 5 minutes or 10 minutes). It will be activated by pushing any button on the front panel of monitor or by higher
sound detected by cameras. If it is activated by pushing any button
(except OK button) on front panel of monitor, the monitor will go back
to black screen after the time you set if there is no sound trigger during
that time. If it is activated by higher sound (sound trigger), it will go
back to black screen about 8 seconds after the last trigger.
NOTE: It is highly recommended to pair the cameras to the receiver before
permanently mounting the cameras.
A/V Out Menu
The A/V Out menu option is used to adjust the resolution
quality of the image sent to the viewing device (such as a TV,
VCR or Monitor). Use the UP and DOWN  arrows to select
a resolution, and press OK to accept. It is strongly recommended to use the “High” setting to ensure the best image
reproduction on large screens – the default setting is “High”.
If you have problems with the system, there is often a quick and simple
solution. Please try the following:
No picture from a camera
1 Check all connections to the camera. Make sure
the adaptor is plugged in.
2 Make sure that the cameras and receiver are
both ON.
3 Make sure that the camera is in range of the
4 If using the battery adaptor, try replacing the
Technical wireless receiver specifications
Receiving frequency range
Data rate
1.5 Mbps
Receiving sensitivity
Demodulation type
H: 480 V: 240
Viewing angle
H: 50° V: 50°
A/V Output / Resolution
VGA 640x320 / 15FPS, QVGA 320x240 / 30FPS
Alarm sensitivity
80dB ±10% (1M)
Power requirement
9V DC ±5%
1 Move the camera closer to the receiver.
2 Try repositioning the camera, receiver or both
to improve the reception.
3 Adjust the monitor antenna to vertical position.
Power consumption
400mA Max without charging
800mA with charging
Operating temparature range
-10° ~ 60° C (14°F ~ 140°F)
Audio problems
1 Ensure that the volume on the TV is on.
2 Make sure that there is sound within range of
the camera microphone
3 If the unit emits a loud screeching noise (feedback),
move the camera or receiver farther apart.
Operating humidity
0 ~ 85% RH
The picture is or has become choppy
The picture may become choppy when experiencing a lower frame rate (i.e. 10 frames per
second vs. a higher 20 frames per second).
1 Try moving the camera closer to the receiver.
2 Remove obstructions between the receiver
and camera.
3 Adjust the monitor antenna to vertical position.
The Picture appears to be grainy when
using AV out function to view on a large
screen TV/monitor
The purpose of the AV output is for convenience
only. When using with large screen TV/monitor,
the picture might be grainy as the camera limits
video resolution to VGA (640x480 pixels). This is
not a product defect.
1 For best performance use with TV/monitor
PIP (Picture in Picture) function. Check your TV/
monitor product manual to see if this feature is
available on your TV/monitor.
2 View video on a smaller screen TV/Monitor
The picture is dropping
Technical wireless camera specifications
Transmit frequency range
Data rate
1.5 Mbps
Transmitting power
14dBm (TYP)
Modulatie type
Transmitting distance
150m (line of sight)
Image sensor type
1/4” kleur CMOS image sensor
Effective pixels
H: 640 V: 480
Image processing
Motion JPEG
Image Resolution / Frame Rate
H: 640 V: 480 / 30FPS Max
On 1/2000 ~ 1/20 sec
White balance
AGC / Range
On / 0dB~24dB
4.9mm / F2.8
Viewing angle (diagonal)
Minimum illumination
2.5 LUX (IR Off ), 0 LUX (IR On)
IR LED / Night vision range
8 LEDs / 840nm 5m (with IR LED)
Power requirement
9V DC ±5%
Power consumption
360mA MAX (with night light)
300mA (without night light)
Operating temperature
-10°C ~ 40°C (14°F ~ 104°F)
Operating humidity
0% ~ 85%
Environmental rating
-10° ~ 60° C (14°F ~ 140°F)