Surveillance_Kits

Surveillance_Kits
Information on Disposal of Old Electrical and Electronic Equipment
(applicable for EU countries that have adopted separate waste
collection systems).
Products with the symbol (crossed-out wheeled bin) cannot be
disposed as household waste.
Old electrical and electronic equipment should be recycled at a
facility capable of handling these items and their waste
byproducts. Contact your local authority for details in locating
a recycle facility nearest to you.
Proper recycling and waste disposal will help conserve resources
while still preventing detrimental effects on our health and
the environment.
SURVEILLANCE
KITS
1 Wire Surveillance Kit
For warranty information, customer service, or to
order replacement parts, please contact:
2 Wire Surveillance Kit
10 West Main Street • Carpentersville, IL U.S.A. 60110
Phone: 847-428-7171 • Fax: 847-551-1343
E-mail: info@ottoexcellence.com
www.ottoexcellence.com
804052 - Rev N
3 Wire Surveillance Kit
SURVEILLANCE
KITS
The OTTO Surveillance Kits for two-way radio
communications provide remote monitoring and optional
remote control of the push-to-talk function of the radio.
They are designed for use in low to moderate noise
environments to ensure discreet transmissions that are
unnoticed by others.
These Kits feature:
• Lightweight earphone, rubber eartip, radio connector
and clothing clip
• Low-profile, flexible, transparent, acoustic tube
• Quick disonnect earphone adapter for easy
replacement of any one component
REPLACEMENT PARTS
DESCRIPTION
Noise Attenuating
eartube/earplug set, Qty 1
Quick Disconnect Acoustic
Tube Assembly, Noise Attenuating
Plugs (Kit includes acoustic tube,
adapter w/clip, foam eartube
plug and foam earplug)
SURVEILLANCE
KITS
BEIGE PART #
BLACK PART #
C100733
C101221-19
C101221-2
Flexible Open Ear Inserts,
Left medium
C806573-LM
Flexible Open Ear Inserts,
Right medium
C806573-RM
• Flexible, high-grade Kevlar cable for demanding
applications
• Beige or black color options
• Comes with a three year warranty
Additional Surveillance Kits include:
• 1 wire monitoring kit with In-Line PTT and mic
• Rotating Ear Hanger with mini In-Line PTT
• Ear Loop and Ear Bud with In-Line PTT and mic
• Ear Bud with In-Line PTT and mic
1
10
REPLACEMENT PARTS
DESCRIPTION
9
PRODUCT DEFINITIONS
BEIGE PART #
BLACK PART #
Standard clear eartip, Qty 1
C800947
Standard clear eartip, Qty 10
C100569
Standard clear eartip, Qty 25
C101206
Standard clear eartip, Qty 100
C101207
Quick disconnect acoustic
tube adapter kit
(includes tube, adapter with
clip and eartip)
C101220-19
C101220-2
Quick disconnect adapter
with clip
C101222-19
C101222-2
1 Wire Professional Surveillance Kit - Listen Only
The 1 Wire Surveillance Kit consists of an earphone, standard size
eartip, acoustic tube adapter, acoustic tube, and cable terminating
into the radio accessory connector.
2 Wire Professional Surveillance Kit
The 2 Wire Surveillance Kit consists of two cables: one that has an
earphone, rubber eartip, quick disconnect acoustic tube adapter, and
acoustic tube; and one that has a combined push-to-talk switch and
palm microphone, both of which terminate in the radio accessory
connector.
3 Wire Professional Surveillance Kit
Quick disconnect acoustic
tube and eartip only
(1 per pack)
C101199
Quick disconnect acoustic
tube and eartip only
(5 per pack)
C101199-05
Earphone Only
C101115-19
C101115-2
Replacement Surveillance Kit
with Acoustic Tube
(includes earphone, acoustic
tube, adapter and clear eartip)
C101219-19
C101219-2
The 3 Wire Surveillance Kit consists of three cables: one that has an
earphone, rubber eartip, quick disconnect acoustic tube adapter, and
acoustic tube; one that has a barrel push-to-talk switch; and one that
has a low profile lapel microphone with clothing clip, all of which
terminate in the radio accessory connector.
Noise Attenuating Kit (Optional)
Recommended for high noise environments, a noise attenuating
kit with a foam eartube can easily replace the rubber eartip on any
of the kits mentioned above.
See the replacement parts table for part number identification.
Flexible Open Ear Inserts (Optional)
The Flexible Open Ear Inserts are molded from hypo-allergenic plastic
and designed to fit entirely inside the ear. Its open frame still allows
the user to hear ambient noise.
See the replacement parts table for part number identification.
2
INSTALLATION
(1)
Turn the radio off. Installation of the surveillance kit while
the radio is on may cause the radio to transmit constantly,
locking up your radio system. If this should happen, turn off
the radio. The radio can then be turned back on, restoring
normal operations.
(2) Remove any dustcaps or covers from the radio
accessory connector.
(3) Attach the surveillance kit to the radio accessory connector.
(4) Tighten mounting thumbscrew if required. Install radio
accessory clamp if required.
OPERATION
Turn the radio on and operate it as explained in the operating instructions
supplied with the radio. Installing the surveillance kit bypasses the radio’s
speaker and routes the output to the earphone’s speaker. When using the
optional remote push-to-talk and microphone, the remote mic is enabled
and on most radios, the radio’s microphone is disabled.
MAINTENANCE
OTTO recommends the periodic cleaning of the eartip with a mild soap
and water solution to extend the life of the accessory. OTTO also
recommends the proper storage of the accessory away from high
temperature conditions to prolong the life of the accessory.
HEARING PROTECTION WARNING
OTTO Communications products are designed to produce a specific
audio output level at maximum rated power. Many countries now have
regulations defining the amount of noise that an individual can be
To change the surveillance component parts refer to the exploded
view (see Figure 1) and proceed as follows:
subjected to during a normal workday. The duration of exposure, the level
of audio output and the level of ambient noise will affect compliance to
these regulations. Compliance is application dependent and standards vary.
a) To change eartips on an acoustic tube, detach the eartip
from the elbow. Position the replacement eartip over the elbow and
press firmly on the eartip to secure.
It is the SOLE RESPONSIBILITY of the end user to determine applicability
of and compliance to local hearing protection regulations.
In addition, if purchasing any OTTO accessories which use surveillance kits,
it is the SOLE RESPONSIBILITY of the user to determine proper fit. Always
use caution when inserting any of the products into your ear.
3
8
TRANSITION MODULE VIEW
INSTALLATION
b) To change to a noise attenuating assembly on an acoustic
tube assembly or to change eartubes on a noise attenuating
assembly, detach the eartip piece from the elbow. Position the
tube end of a new eartube piece from a noise attenuating plug
kit over the elbow and press firmly on the eartube to secure.
SCREWS
TRANSITION MODULE
COVER
CIRCUIT BOARD
CUSHION
MICROPHONE GAIN
ADJUSTMENT
c)
To replace an acoustic tube assembly, simply grab the base of the unit and turn a 1/4 turn to the left and gently pull out the acoustic tube.
d)
To change earphones, gently pry the acoustic tube adapter away from the earphone by sliding a thin object between the adapter and the earphone. Work the thin object around the
circumference of the earphone to free adapter. Detach the cable
connector from the earphone. Reconnect the accessory cable connector to the new earphone by snapping firmly in place.
Snap the acoustic tube adapter onto the earphone.
TRANSITION MODULE VIEW
7
4
FIGURE 1
HOW TO USE
HOW TO USE NOISE ATTENUATING KITS
Take the earplug or eartube between a thumb and finger. Gently
squeeze and roll the earplug or eartube until small enough to fit
within the ear canal. Position the earplug or eartube into the ear
canal. The earplug or eartube will expand to fit firmly within the
ear canal.
HOW TO ADJUST MICROPHONE GAIN
(NOT STANDARD ON ALL PRODUCTS)
Microphone gain is adjustable on some 2 wire and 3 wire kits that
have a transition module between the cables to the earphone,
microphone and push-to-talk switch and the cable to the radio
connector. To access the adjustment, remove the two Torx head
screws (size 6) and the transition module cover, (see transition
module view). A gain control potentiometer is located on the circuit
board closer to the microphone cable end of the transition module.
Turn the gain control counter-clockwise to decrease microphone
sensitivity in high background noise environments. For increased
microphone sensitivity in low background noise environments, turn
the gain control clockwise. Cable boots and crimps must be
positioned with their largest flat facing upward before closing the
transition module cover and re-installing the screws.
5
6
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising