8, 10 KW units
Automatic Home Generator Systems
8-10kW
Technical Specs
¹
Small is Smarter
The compact 8kW1-10kW1 Home Generator System
by GE has the smallest standby generator footprint of
its class. Its unobtrusive design, convenient placement
options and comprehensive warranty make it the
best choice for your customers with small to medium
properties. Plus, each model includes a convenient basic
wireless monitor.
The 8kW1 home generator system keeps the essentials
powered in your customer’s home. The 10kW1 home
generator system provides enough power for more than
just the essentials by managing up to 8 appliances with
Symphony® II Power Management.
Give your customers peace of mind with GE Generator
Systems. The smart choice.
To learn more, visit www.ge.com/generatorsystems
LP Vapor
Natural Gas
Features and Benefits
• 4 Year Parts and Labor Limited Warranty² one of the best in the industry!
• Complete package from GE Generator Systems
(generators, transfer switches and accessories)
•
•
•
•
Long-lasting durability
Service-friendly access points
Designed around your protection (NFPA 37 Rated)
Operating temperature -20° - 104°F (-28.8° - 40°C)
Generator Set Ratings
kW
Amps
kW
Amps
Voltage
Power
Factor
Phase
Hz
Breaker
8.0
33.3
6.0
25.0
120/240
1.0
1
60
35A
10.0
41.7
9.0
37.5
120/240
1.0
1
60
50A
LIMITED
WARRANTY
Engine Specifications
Engine Model
Briggs & Stratton® Intek (8kW)
Vanguard™ (10kW)
319775-0109e1 /
359775-1112e1
Engine Model Type Trim Number
4-Cycle
Engine Type
OHV
Engine Cylinder Configuration
Number of Cylinders
1 (8kW), 2 V-Twin (10kW)
31 / 500, 35 / 570 CC
Displacement (ltr / cu.in.)
Smallest Standby Generator.
LIMITED
WARRANTY
We offer a comprehensive
parts and labor, 4-year limited
warranty2, so you can be assured
of our commitment to quality. And
your pocketbook.
Bore (in)
3.56 / 2.83
Stroke (in)
3.06 / 2.76
Engine Weight (lbs)
66 / 79 lbs
Engine Fuel
Liquid Propane / Natural Gas
Naturally Aspirated
Induction System
Starter
Industrial
Valves
OHV with Hardened Seats
Air Filter Type
Standard, UL Approved
Governor Type
Mechanical
+/-0.5%
Frequency Regulation
Automatic
Start Type
Our 8kW1/10kW1 standby
generators can be placed as
close as 18” from the home
in accordance with National
Fire Protection Agency testing
standard3. Our 8kW1/10kW1
standby generators are the best
choice for homeowners with tight
lot lines.
Lubrication System
Full Pressure
Recommended Oil
5W30 Full Synthetic
Oil Capacity (oz.)
48 / 57.5 oz
Oil Cooler
10kW Only
Transfer Switch Specifications (Package Options)
50A (8kW), 100A 16 circuit,
100A or 200A (10kW)
Yes
UL Approved
120/240
Voltage Ratings
No
Wired Whip
Number of Protected Circuits
Newly designed for standby
applications, Briggs & Stratton®
engines deliver improved
reliability, performance and
durability to meet your power
demands during a power outage.
Air-cooled
Cooling System Type
Current Rating
Includes a wireless monitor for
inside your home, so homeowners
know their generator is working
without having to go outside.
Yes
Low Oil Pressure Sensor
Weight and Dimensions
Assembled Weight (lbs)
Assembled Dimensions
(L x D x H)
Packaged Weight Without
Transfer Switch (lbs)
Packaged Dimensions
(L x D x H)
10 Circuit or 16 Circuit or
Whole House
8kW¹
10kW¹
252
272
28 x 24.4 x 33.5"
310
330
39 x 35.5 x 42"
LP Fuel Consumption4
8kW¹
10kW¹
Alternator Specifications
100% Load (ft3/hr / gal/hr)
56.4 / 1.57
65.6 / 1.82
Manufacturer
50% Load (ft3/hr / gal/hr)
37.6 / 1.04
42.8 / 1.18
Type
Briggs & Stratton®
Self-Excited, Rotating Field
Brushed
Brushed/Brushless Alternator
NG Fuel Consumption4
8kW¹
10kW¹
100% Load (ft3/hr)
121
169
Number of Poles
50% Load (ft3/hr)
94
111
Insulation
Other Features
Enclosure Material
Galvanneal with Corrosion
Resistant Paint
Yes
Engine Warm-up (min)
20s or 50s ATS Jumper Controlled
Engine Cool Down (min)
1 min.
Yes
Continuous Battery Charging
Yes
12V, Not included. BCI size 26,
battery min 540 CCA; Below 30°F:
BCI size 24F battery, min 800 CCA
Hour Meter
Yes
Weekly Exerciser
Yes
8kW¹
10kW¹
Exercise (dBA)
75.6
71.3
3kW¹ Load (dBA)
76.8
72.3
Full¹ Load (dBA)
79
75.4
Controller Fault Codes
Diagnostic alerts are
communicated on the control
panel and through the Basic
Wireless Monitor. When a fault
code issue arises, the Basic
Wireless Monitor’s Service Needed
light will blink. The number of blinks
represent the fault code issue.
Wireless, Basic
Monitoring
Sound Rating at 7 Meters,
per ISO 3744
Class F
26s or 56s ATS Jumper Controlled
2 Wire Sensing
Battery
2
Controller Features
Overcrank Protection
Response Time (min)
Automatic
Voltage Regulation
1.
2.
3.
4.
5.
6.
7.
8.
Low Oil Shutdown
Engine Does Not Start
Low Frequency
Engine Overspeed
Low Voltage
Low Battery Voltage
Engine Temp High
Transfer Switch Fault
Limited Warranty²
Certifications
UL
Yes
cUL
Yes
Consumer Warranty
(Product )
4 Years
Limited Parts and Labor
Not for Prime Power or use where standby systems are legally required,
for serious life safety or health hazards, or where lack of power
hampers rescue of fire-fighting operations.
¹ This generator is rated in accordance with UL (Underwriters
Laboratories) 2200 (stationary engine generator assemblies) and CSA
(Canadian Standards Association) standard C22.2 No. 100-04 (motors
and generators).
² Warranty details available at
ge.com/generatorsystems.
33.5˝
28.0˝
24.4˝
³ Installations must strictly comply with all applicable codes, industry
standards, laws, regulations and provided installation manual. Running
engines give off carbon monoxide, an odorless, colorless, poisonous
gas so it is important to keep exhaust gas away from any windows,
doors, ventilation intakes or crawl spaces. The installation manual
contains specific instructions related to generator placement in
addition to NFPA 37, including the requirement that carbon monoxide
detectors be installed and maintained in your home.
4
Fuel consumption rates are estimated based on normal operating
conditions. Generator operation may be greatly affected by elevation
and the cycling operation of multiple electrical appliances – fuel flow
rates may vary depending on these factors.
Why Choose GE?
Included Extras
A GE whole house generator, with our ground-breaking
Symphony® II Power Management, has the flexibility to
Each system includes a basic wireless monitor, hour meter,
battery charger and oil.
automatically direct backup electricity to any appliance, light,
TV or computer in a home. And unlike conventional backup
power systems that may only provide access to 50% of a
home’s power needs, Home Generator Systems by GE can
power more of a home with a smaller, more fuel-efficient,
smarter generator.
Warranty
The 4 Year Limited Parts and Labor warranty² is one of the best
comprehensive parts and labor warranties in the industry.
Complete Package
Transfer Switches
50 Amp, 10 Circuit Transfer Switch
GE 8kW1 home generator system operates with our 50 Amp, 10
Circuit transfer switch that powers your home’s essential circuits.
The NEMA 3R rated transfer switch can be installed both inside
and outside the home.
Symphony® II Transfer Switch (10kW1 only)
GE 10kW1 home generator system operates with our 100 Amp
or 200 amp Symphony® II transfer switch. This transfer switch
features advanced power management control that provides
the flexibility to manage 8 high wattage appliances, with a
smaller generator. The NEMA 3R rated transfer switch can be
installed both inside and outside the home.
With GE Generator Systems, you can save time and money
by ordering the complete package including transfer switch,
generator and accessories.
Reliable
GE is a name your customers know and trust. You can be
confident that each installed Standby Generator System will
perform for many years.
Ready to place an order? Our team is ready to help.
Rely on this model chart and call 1-87-RELY-ON-US.
8kW¹
10kW¹
50A, 10 circuit
040444
NA
100A, 16 circuit
NA
040452
100A Symphony® II
NA
040447
200A Symphony® II
NA
040446
200A Symphony® II &
(2) 50A Modules
NA
040448
Is a trademark of General Electric Company
and is under license by Briggs & Stratton
Corporation
Post Office Box 702
Milwaukee, WI 53201 USA
Assembled in USA
Symphony® II Modules (10kW1 only)
The Symphony® II modules work within the Symphony® II Power
Management System communicating via existing wires with
your generator turning prioritized appliances on/off based on
homeowner need and generator load. The modules can be
placed inside or outside the home for a customized installation
for your customers’ power needs.
Available Accessories
Order Your Way
Transfer Switch
Modules
Maintenance Kit
Maintenance kits help you complete scheduled and preventative
maintenance on your standby generator. Designed specifically
for your generator’s needs, each maintenance kit contains oil
and air filters, an oil funnel and spark plug(s).
Cold Weather Kit
Helps ensure smooth operation in the winter months with the
Briggs & Stratton® Cold Weather Kit for GE Generator Systems.
The thermostatically controlled battery warmer and oil heater
activate as the temperature drops helping the standby generator
operate in colder temperatures. The 8kW¹-10kW¹ home
generator systems using this kit have been tested to start as low
as -20°F. Kit includes two oil warmers and one battery warmer.
Briggs & Stratton Corp. reserves the right to make
changes in specifications and features shown
herein, or discontinue the product described at
any time without notice or obligation.
GESB00104-3/13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising