Installation instruction FISCON Bluetooth Hands - FISCON

Installation instruction FISCON Bluetooth Hands - FISCON
Version 1.31
(16.07.2014)
Installation instruction
FISCON Bluetooth
Hands free kit
Volkswagen
Article-ID
36495
36495-1
36495-2
36496
36496-1
36496-2
36858
www.kufatec.de
Kufatec GmbH & Co. KG • Dahlienstr. 15 • 23795 Bad Segeberg • e-mail: info@kufatec.de
Content
General advice .........................................................................................................................................2
Safety Instructions....................................................................................................................................3
References of legal regulations for operation ...........................................................................................3
FISCON hands free..................................................................................................................................4
Installation instrruction..............................................................................................................................5
Fitting notes for vehicles with factory fitted hands free kit .........................................................................6
Microphone ..............................................................................................................................................6
Coding with VAS ......................................................................................................................................8
Coding with VAG-Com (VCDS) ..............................................................................................................10
Control elements ....................................................................................................................................11
FISCON menu........................................................................................................................................12
Operation instruction ..............................................................................................................................14
Interface - Diagnostic..............................................................................................................................22
FAQ........................................................................................................................................................23
1
General advice
While developing this product, your personal safety combined with the best operating service, modern
design and an up-to-date production technique was especially taken into account.
Unfortunately, despite the utmost care injuries and/or damages might occur due to improper installation
and/or use.
Please read the attached instruction manual completely with great care and keep it!
All articles of our production line pass through a 100 % check - for your safety and security.
We reserve the right to carry out technical changes which serve the improvement at any time.
According to each article and purpose, it is sometimes necessary to check each country’s legal
regulations before installing and starting the unit.
In case of guarantee claims, the device has to be sent back to the seller in the original packaging with
the attached bill of purchase and detailed defect‘s description. Please pay attention to the manufacturer‘s
return
requirements (RMA). The legal warranty directions are valid.
The guarantee claim as well as the operating permission becomes invalid due to:
a) unauthorized changes to the device or accessories which have not been approved or carried out
by the manufacturer or its partners
b) opening the device‘s frame
c) device‘s repairs carried out by one‘s own
d) improper use / operation
e) brute force to the device (drop, wilful damage, accident etc.)
During installation, please pay attention to all safety relevant and legal directions. The device has only to
be installed by trained personnel or similarly qualified people.
Please limit on installation or function problems the troubleshooting to 0.5 hours for mechanical
and 1.0 hours for electronic works.
To avoid unnecessary work and to save costs, please send us immediately via the contact form Kufatec
(http://www.kufatec.de/shop/de/infocenter/) a request to our technical support.
Please quote the following necessarily:
 Vehicle Identification Number

Part number of the retrofit kit

Detailed description of problems

Already conducted operations
2
Safety Instructions
Installation requires special knowledge.
Do not install the unit yourself. For safe and reliable installation, consult a dealer having special
knowledge.
• Never use bolts or nuts from the car’s safety devices for installation. If bolts or nuts from the
steering wheel ,brakes or other safety devices are used for installation of the unit, it may cause an
accident.
•Use the unit with a DC 12V negative ground car. This unit cannot be used in large trucks which
use a DC 24V battery. If it is used with a DC 24V battery, it may cause a fire or accident.
• Avoid installing the unit in following places: - Where it would hinder your safe driving. - Where it
could damage the car’s fittings.
• This unit is only for use in the following vehicles. Only connections described within this
instruction guide are allowed or required to use for installation.
• For damage impact caused by faulty installation, unsuitable connections inappropriate vehicles
Kufatec GmbH assumes no liability.
• We advise you that these units process datas out of the MOST - protocol from the vehicle. As
the supplier of this device we don‘t know the overall system you are working with. If our device
causes damage due to other changes made by to the vehicle Kufatec GmbH assumes no liability.
• Kufatec GmbH supplier do not guaranty the use of the product for changing’s within a new
vehicle series.
• If the car manufacturer’s don‘t agree with the installation of our device by reason of warranty the
Kufatec GmbH assumes no liability. Please check conditions and warranty before you begin the
installation.
• Kufatec GmbH supplier reserves the right to change the device specifications without notice.
NOTE: The road traffic has to have your full attention.
Telephone operations should only be done by suitable traffic and weather situations. The volume
need to be set that you are still able to realise acoustic warn signals (Police, fire brigade).
• Errors and changes excepted.
References of legal regulations for operation
Only use this unit in the intended domain.
If you use it in a foreign domain, if the unit is not installed properly, or if the unit will be reconstructed, the
guarantee will expire.
3
FISCON hands free
• OEM-menu driven operation:
Head unit RNS 510, RNS 810, RCD 510
RNS 310 (From 2011 model year with RNS 310 Software index 0351/ From
FISCON Software index 1.87)
Multifunctional steering wheel (if available)
Wiper control stalk (if available)
• Driver information system plus (DIS+) is condition for displaying telephone information within the DIS
• Direct dial of telephone numbers
• DTMF Dual-tone multi-frequency
• A2DP Audiostreaming in order to transfer music to the Infotainment system of the vehicle
• SMS short messages (If supplied from mobile phone):
SMS reading, sending of ready made sms
• Microphone adjustment in order to optimize the voice quality
• Volume control regarding A2DP, Conversation, Ring tone
• Unlimited Software Updates
• Use of the following telephone operations:
Access to the phonebook (depends on mobile phone, display through the cluster)
Placing, answering as well as ending calls
Volume control
• E-MFA Add on (Only for vehicles with red DIS) - DIS extensional display of the following vehicle
information:
Boost pressure in bar (depends on vehicle)
Oil temeperature in°C/ F
Water temeperature in°C/ F
Remaining petrol capacity in l
Speed in km/h - m/h
Revolutions per minute
Battery voltage in V
• ICON displaying (if supported from mobile phone) – mobil, work, home
• FISCON diagnostic access – Checking interface information as well as completing a RESET
Scope of delivery
Bluetooth Interface
Wiring
Microphone
NOTE: Before installing the FISCON system you need to check whether the car is retrofitted with
a video interface not developed by Kufatec. In case a non-Kufatec video interface is fitted we are
not able to guaranty the absolute operation of the FISCON system. You may need to remove the
non-Kufatec video interface.
In order to achieve a proper communication you need to keep installation sequence as follows:
Vehicle >>> FISCON >>> Multimedia (Multimedia Adapter, TV in motion)
FISCON system can be used in combination with the Kufatec Multimedia Adapter
(from SW 2.53).
4
Installation instrruction
Fig. 1
1 – Head unit
2 – Telephone interface (location can be different)
3 – Microphone
NOTE: The location of the telephone interface can be different within the vehicle.
Remove the head unit using suitable tools (Fig. 2). Loosen the necessary screws of the head unit (Fig.
3).
Fig. 2
Fig. 3
With a P&P connection you will complete the fitting (item 36495, 36496).
Fig. 4
5
Fitting notes for vehicles with factory fitted hands free kit
While using item 36495, 36496:
- Remove original telephone interface, remove fuse of the hands free
While using item 36495-1, 36496-1:
- Remove original telephone interface - FISCON hands free has to be connected to the original
telephone connector
NOTE: The location of the original telephone interface can be different within the vehicle.
Move the passenger seat to the far back end. Loosen the necessary screws in order to angle the seat
(Fig. 5). Disconnect the original telephone interface (Fig. 6). Connect the delivered loom with original
telephone connector coming from the vehicle (Fig. 7).
Fig.5
Fig. 6
Fig.7
Microphone
NOTE: Does the vehicle have airbags fitted along the A-column it is essential to wire the
loom for the microphone BEHIND the airbag. Wire the loom without putting tension on it.
Mount the loom without affecting the airbag in its functionality.
Remove the airbag sign by using suitable tools (in order to avoid damages) and loose the screw located
behind (Fig. 9).
Fig.8
Fig.9
6
Fig.10
Angle the microphone towards the driver position (Fig. 11).
For Version (Fig. 8) - Article-ID 36495-1, 36496-1, 36338-2 the original mic has to be replaced.
Fig.11
Fig.12
7
Coding with VAS
After installation the system needs to be coded. Please contact a VW/Skoda dealer. In order to code the
vehicle system you need to choose the Self-Diagnosis.
The coding process is identical for both VW as well as Skoda vehicles.
Address 19
Vehicle Self Diagnostic
Address 19 CAN Gateway
Coding
Component list
Telephone from „not coded“ --- to --- „coded“ - confirmation
8
Only for T5 / Polo with Multifunctional steering wheel
Adresse 09
Byte 15
-
Bit 0 auf 1 setzen
Eigendiagnose
xxxxxxx1
Adresse 09 Zentralelektrik
Fahrzeug-Eigendiagnose
008 - Codierung
Byte Index
Hex
0
1
2
…
17
Bit-Muster
1xxxxxxx
1
2
3
4
5
6
7
8
9
C
0 Q
HEX
Codierung
BIN anwählen
BIN
Codierwert eingeben+ bestätigen
For all other vehicles with multifunction steering wheel please activated the push to talk button.
Adresse 16 (all another vehicles with long coding)
Byte 01
-
Bit 3 auf 1 setzen
xxxx1xxx
9
Coding with VAG-Com (VCDS)
VCDS can also be used for coding.
The following coding values are available for VW vehicles so far.
Address 19 – CAN-Gateway needs to be coded to Telephone
Vehicle
Index CAN Gateway
Coding
Caddy
Eos
Golf 5
Jetta
Tiguan
Touran (1T)
Caddy
Eos
Golf 5
Jetta
Tiguan
Touran (1T)
Touareg (7L6)
F
Byte 3 – Bit 7
K
L
Byte 5 – Bit 2
14
Byte 4 – Bit 7
Passat (3C)
Passat (3C)
Byte 4 – Bit 2
Q
Byte 6 – Bit 2
10
Control elements
Multifunctional steering wheel
By pushing the Menu button „KUFATEC FISCON“ will appear. By pushing the OK-button you will enter
the menu. By using the Arrow-buttons you will choose the single options. In order to leave the menu
select the option „BACK“. You also can press one of the arrow-buttons for about 3 seconds.
Fig. 13
Fig. 14
Wiper stalk
By pushing the sideways button about 3 seconds you will reach the DIS
menu of the vehicle. Select „KUFATEC FISCON“ by pushing the
OK/RESET-button. By using the sideways button you will choose the single
options. By using the OK/Reset-button you will confirm the selection. In
order to leave the menu select the option „BACK“. You also can press the
sideways button about 3 seconds.
Driver information system + (DIS+)
The menu will be displayed within the DIS+ of the vehicle.
Fig. 17
Fig. 18
RNS 510, RNS 810, RCD 510, RNS 310
OEM-menu driven operation by using the buttons/ touch screen of the head unit.
Fig. 19
11
Fig. 15
FISCON menu
PHONEBOOK
DIALLED NUMBERS
ACCEPTED CALLS
MISSED CALLS
DIRECT DIAL
A2DP
START A2DP
STOP A2DP
NEXT TRACK
PREVIOUS TRACK
SMS
UNREAD
SMS1
READ SMS
READ
CALL
UNSENT
REPLY
SEND SMS
SENT
SETUP
MICROPHONE
SIGNAL 0dB – 30dB
VOLUME A2DP
RANGE: 0 – 63
VOLUME TELEPHONE
RANGE: 0 – 15
VOLUME RINGTONE
RANGE: 0 – 15
SW-UPDATE
(Press for 6 SEC.) UPDATE ACTIVATED
FACTORY SETTINGS.
E-MFA ADD ON
VERSION
12
OK
FISCON menu
Display DIS+
Description
PHONEBOOK
Access to the phonebook of the mobile phone. The phonebook
feature is not supported by all mobile phones. Does your mobile
phone support the phonebook feature you will have access to the
phonebook. Phonebooks that have a large number of entries can take
quite a long time to synchronise. Please avoid cancelations during
synchronisation.The phonebook feature is limited to 1000 phonebook
entries.
DIALLED NUMBERS
By choosing the menu DIALLED NUMBERS you are able to select
these telephone numbers you dialled before (if supported from mobile
phone).
ACCEPTED CALLS
By choosing the menu ACCEPTED CALLS you are able to select
these telephone numbers you accepted before (if supported from
mobile phone).
MISSED CALLS
By choosing the menu MISSED CALLS you are able to select these
telephone numbers which tried to call you but you didn‘t accept (if
supported from mobile phone).
DIRECT DIAL
You can use the multifunctional display and enter numbers by stalk or
MFSW for dialling (0-9).
A2DP
By choosing the menu START A2DP the system will have access to
the music files stored on the mobile phone (if supported from mobile
phone). By using the MFSW as well as the wiper stalk you can select
the single tracks (NEXT TRACK, PREVIOUS TRACK). By choosing
the menu STOP A2DP the music playback will be stopped.
SMS
By choosing the menu SMS you will have access to READ, UNREAD,
SENT as well as UNSEND short messages (if supported from mobile
phone). You will have the possibility to READ SMS, to DIAL the
number of the sender as well as to SEND ready made SMS.
SETUP
By choosing the menu SETUP you are able to set general settings of
the hands free kit. Microphone, Volume regarding to A2DP/ Ringtone/
Caller, SW-Updates, Factory settings.
E-MFA ADD ON
DIS - display of additional specific vehicle information - Oil
temperatur, Boost, Remaining petrol capacity, Speed, Revolutions per
minute
VERSION
Current interface information
13
Operation instruction
The following operating instruction is valid for head unit RCD 510, RNS 310, RNS 510, RNS 810 –
Version Basic Plus
Pairing
1.
2.
3.
4.
Press the TEL button on the head unit
Make sure the Bluetooth feature is turned on
Start the pairing procedure on your mobile phone
When prompted for a passkey, enter 1234 on your mobile phone
Once pairing is complete Fig. 20 will appear on the screen of the head unit. You will see the network
provider‘s name as well as the coverage if supported from mobile phone.
Fig. 20
Numbers of Bluetooth devices - You may pair up to 5 different mobile
phones.
In case of pairing an additional mobile phone (5 mobiles already listed) the system has to be set back to
factory settings.
Factory settings
Select the menu SETUP > FACTORY SETTINGS
NOTE: In case of activating the factory settings all stored mobile phones get lost.
Fig. 21
Fig. 22
14
Phonebook
NOTE: The mobile phone must support phone book sync via Bluetooth to use this feature.
The phonebook feature is limited to 1000 phonebook entries (sub-entries included) .
Phonebooks that have a large number of entries can take quite a long time to synchronise.
Please avoid cancelations during synchronisation.
Touch the button
(Fig. 23).
Select a phonebook entry and press the DIAL button for placing the call (Fig. 24).
Fig. 23
Fig. 24
Sorting sequence of phonebook entries
Firstname, Lastname OR Lastname, Firstname
NOTE: This feature is saved by mobile phone profile. If another mobile will be paired the
following steps needs to be completed again.
This feature is not supported from all mobile phones!
This feature is available fom FISCON mainboard software 1.94.
Sequence Firstname, Lastname
1.
2.
3.
4.
5.
Pair up your Bluetooth phone with the hands free as usual.
The phonebook needs to be loaded completely.
Enter the following code into your mobile: *582#5000 or 258225000
After entering the code please press DIAL on the mobile
(Fig. 25)
Hang up after 2-3 seconds. The call will be answered with “The number does not exist” but the
activation has been completed.
Fig. 25
NOTE: The phone should stay connected for at least 10 minutes after the code is entered (this time
depends on how many entries are stored in the phone).
Either the new phonebook will show up automatically OR the new phonebook will show up after next
pairing. (This depends on which radio system is installed).
15
Sequence Lastname, Firstname
1.
2.
3.
4.
5.
Pair up your Bluetooth phone with the hands free as usual.
The phonebook needs to be loaded completely.
Enter the following code into your mobile: *582#5001 or 258225001
After entering the code please press DIAL on the mobile
(Fig. 26)
Hang up after 2-3 seconds. The call will be answered with “The number does not exist” but the
activation has been completed.
Fig. 26
NOTE: The phone should stay connected for at least 10 minutes after the code is entered (this time
depends on how many entries are stored in the phone).
Either the new phonebook will show up automatically OR the new phonebook will show up after next
pairing. (This depends on which radio system is installed
Icon
In case of storing different numbers within one contact the specific icon will be displayed:
Mobile
Work
Home
Phonebook search option
Select the menu PHONEBOOK. Press the button
for about 2 Sec. By using the buttons
you can switch to the next letter (A…B…C…). By using the OK – button you will leave the search option.
Fig. 27
16
Call lists
Touch the buttons CALL LIST > DIALLED NUMBERS / INCOMING CALLS / MISSED CALLS
Select an entry and press the DIAL button for placing the call.
Fig. 28
NOTE: The mobile phone must support call list sync to use this feature.
Dialling with Keypad
Touch the
key. Type the number you would like to dial using the keypad and press the DIAL button
for placing the call (Fig. 29).
Fig. 29
Direct dial
Select the menu DIRECT DIAL – enter the number by using the stalk as well as the MFSW – placing
the call by confirming (Fig. 31).
Fig. 30
Fig. 31
17
Incoming calls
An incoming call will cause the radio to mute. The name of the caller (depends on mobile) will be
displayed. In case the caller is not stored by name the number will be displayed.
The call can be accepted by touching the ANSWER option OR rejected by touching the REJECT option.
Fig. 32
Activation-Deactivation A2DP/ Voice control
A2DP Audiostreaming
NOTE: The A2DP function has to be activated before using.
The mobile phone must support A2DP sync via Bluetooth to use this feature.
STEREO A2DP will be supplied from mainboard v2.00 as well as hardware 3411+. These
information can only be checked on the sticker on the back of the FISCON module.
Voice control
NOTE: The voice control function has to be activated before using.
ONLY suitable for vehicles with multifunctional steering wheel.
In case of factory fitted multifunctional steering wheel the voice control of the mobile phone
can be activated. These feature will be supplied for Fiscon VW Plus version from mainboard
v2.04.
After activation the voice control of the mobile phone will be activated while using the button
on the multifunctional steering wheel.
18
Activation/ Deactivation
Please complete the following process:
1.
2.
3.
4.
Pair up your Bluetooth phone with the hands free as usual
Press the TEL button on the head unit
Enter the following code: *582#XXYY
After entering the code please press DIAL
Fig.33
Function
XX
YY
Example
A2DP Activation (Mono)
40
01
*582#4001 resp. 258224001
A2DP Deactivation (Mono)
40
00
*582#4000 resp. 258224000
STEREO A2DP activated/ voice control
deactivated
40
03
*582#4003 resp. 258224003
STEREO A2DP deactivated/ voice control
activated
40
04
*582#4004 resp. 258224004
STEREO A2DP activated/ voice control
activated
40
07
*582#4007 resp. 258224007
FISCON application for VW T5 from 2010
70
01
*582#7001 resp. 258227001
70
00
*582#7001 resp. 258227000
30
(00-07)
ONLY USE THIS CODE IN CASE THE MENU OPERATION
OF THE DRIVER INORMATION SYSTEM WILL HANG-UP
FISCON application for all other vehicles
ONLY USE THIS CODE IN CASE THE CODE FOR T5 HAS
BEEN ACTIVATED
Language settings
Language selection - 30:
00-Vehicle language
01-German
02-English
03-Spanish
04-Italia
05-France
06-Niederländisch
07-Portugiesisch
NOTE: From FISCON Software Index 1.85 the following Code can also be used: 258224001. The call
will be answered with “The number does not exist” but the activation has been completed.
After activation
Vehicle system needs to shut down
NOTE: Please lock the vehicle for about 5 minutes.
The activation can also be completed with the mobile phone. Please enter the code on the mobile and
press dial.
NOTE: Condition is that the mobile transmits the number to the head unit. In case your
mobile doesn‘t support that feature you need to use a phone which does.
19
Select the menu A2DP > START A2DP (Fig. 34). By using the menu FORWARD – BACK the music
files stored on the mobile can be selected. For stop playing music select STOP A2DP.
NOTE:
In some cases the mobile phone does not support the operation.
Fig. 34
Fig. 35
SMS Text message
NOTE: The mobile phone must support text msg sync via Bluetooth to use this feature.
The number of text messages is limited to 30 (unread + read). The unread messages do
have priority.
Select the menu SMS for entering UNREAD, READ, UNSEND, SENT messages (Fig. 36-38).
Select a message (SMS1, SMS2…) und chosse on eof the following options:
READ SMS
CALL (Calling the sender of the short message)
REPLY (Send ready made short message)
Fig. 36
Fig. 37
20
Fig. 38
SETUP
Select the menu SETUP . Choose one oft he following options:
MICROPHONE (Signal boost 0dB - 30dB)
VOLUME A2DP (Value 0 - 63)
VOLUME TELEPhone (Value 0 - 15)
VOLUME RINGTONE (Value 0 - 15)
SW UPDATE
FACTORY SETTINGS
NOTE SW UPDATE: Step to the menu SW UPDATE. For activating the update the button
has to be pressed for at least 6 seconds.
Fig. 39
Fig. 40
E-MFA ADD ON (Only for vehicles with Red DIS+)
Select the menu E-MFA ADD ON (Fig. 41). DIS - display of the following specific vehicle information
(Fig. 42):
Boost pressure in bar (depends on vehicle)
Water temperature in°C/ F
Speed in km/h - m/h
Battery voltage in V
Oil temperature in°C/ F
Remaining petrol capacity in l
Revolutions per minute
By using the buttons of the multifunctional steering wheel as well as the wiper stalk you will switch
between:
RPM - Petrol capacity
Boost pressure - Battery voltage
The DIS Add-On will display changes of the scale unit (°C/F as well as Km/mails) automatically.
Fig. 41
Fig. 42
NOTE: Values can be only displayed if supported by vehicle.
21
DTMF Dual-tone multi-frequency
Suitable for remote enquiry of an answering machine or processing of telephone computers.
While an activated phone conversation the menu DTMF can selected. Entering the numbers by using the
steering wheel buttons.
Interface - Diagnostic
By using the original VW diagnostic software VAS specific information can be checked as well as a
RESET of the hands free system can be completed.
Reset processing
Vehicle self diagnostic
Address 77 - Telephone
015 - Security access
Value 20577 - Q
Value 20577 --- Q (quit) --- RESET completed
Note: After completing a RESET the Bluetooth connection to the hands free will be canceled.
22
FAQ
I do not get any connection to the FISCON hands free!
• A number of 5 different mobile phones have already been connected to the FISCON hands free.
In order to connect another mobile phone the factory settings has to be activated.
Why does not pop up the phonebook on the screen of the head unit RNS 510?
• The phonebook feature is not supported by all mobile phones.
• Phonebooks that have a large number of entries can take quite a long time to synchronise.
I don‘t have any access to the phone menus like „Dialed numbers“, „Accepted calls“, „Missed calls“.
• These features are not supported by all mobile phones.
The FISCON system won‘t be accepted by the vehicle.
• In case a non-Kufatec video interface is fitted we are not able to guaranty the absolute operation
of the FISCON system.
• Any mobile phone preparations which are communicating with the CAN Bus system of the vehicle
have to be removed!
• The system has to be coded specific to the radio as well as vehicle.
I‘m not able to operate the hands free kit by using the buttons of the head unit RNS 510.
• Operation by using the original buttons of the RNS 510 head unit only available with FISCON
version „Basic Plus“.
Why does the E-MFA Add on not appear?
• The E-MFA Add on is only for vehicles with red DIS+. It is not suitable for the white DIS.
Why does the mute function cut of continously?
• The vehicle is already equipped with an hands free kit. This hands free kit has to be removed.
The factory fitted telephone interface on my VW T5 (facelift) 2010 model year is not located underneath
the passenger seat.
• The telephone is located behind the glove box in case of VW T5 (Facelift) 2010.
FAQ – Online
http://www.kufatec.de/faq/public.pl?Action=PublicFAQ&Subaction=Explorer&CategoryID=1
23
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising