BTS 100012 INB 15/12/09 rd.qxd 4-01-2011 15:44 Pagina 1 NEW HOLLAND T9 T9.39O I T9.45O I T9.5O5 I T9.56O I T9.615 I T9.67O BTS 100012 INB 15/12/09 rd.qxd 4-01-2011 15:44 Pagina 2 2 3 YOU’LL BE HARD PRESSED TO FIND THIS MANY HORSES SO WELL TRAINED At New Holland we have put all our tractor building experience into making the T9 tractor series more comfortable and even easier to drive. We have not neglected your core demands either. High capacity axles, advanced transmission control and ultra-efficient power units are housed in a chassis size to match your business needs. Just take a look at what T9 Series tractors have to offer. MORE POWER AND PRODUCTIVITY MAXIMUM VERSATILITY T9 tractors boast New Holland’s cutting-edge SCR technology for Tier 4A compliance. This means that the Cursor 9 and 13 powerplants benefit from exceptional breathability for a significant performance advantage. Massive power growth delivers a peak power up to 10% higher than the rated power, easing the T9 through the toughest work. New Holland have brought high horsepower tractors down to size by using a narrow (36 inch) frame on models up to 557hp(CV). This narrow frame in conjunction with larger diameter tyres make the new T9 ready for anything. ABSOLUTE DRIVING PLEASURE New Holland put the operator right at the heart of the tractor. Easy to use controls are matched to brilliant all-round visibility. Four-point cab suspension is available for the smoothest ride. LOWER OPERATING COSTS Operating costs for the new, Tier 4A compliant T9 tractors, have been reduced thanks to cutting-edge SCR technology. The optimised fuel injection process delivers more power with less fuel. At 600 hours, the engine service intervals reduce cost further. BTS 100012 INB 15/12/09 rd.qxd 4-01-2011 15:44 Pagina 3 EXACTLY WHAT IT SAYS ON THE BONNET T9 tractors offer improved performance thanks to the Tier 4A SCR advantage, and these productivity enhancing characteristics are immediately obvious to all users. How? Quite simply, it is on the bonnet. The first two digits ‘T9’ refer to the tractor’s category and the following three, for example ‘560’, refer to the maximum Engine Power Management horsepower. On most T9 engines this EPM figure also corresponds to the peak power, the power available for any application. Engine speed Max power with EPM [hp(CV)] 390 446 502 557 613 669 EPM [hp(CV)] Rated power [hp(CV)] T9.390 T9.450 T9.505 T9.560 T9.615 T9.670 354 405 457 507 542 608 Horsepower T9.390 T9.450 T9.505 T9.560 T9.615 T9.670 T9.390 T9.450 T9.505 T9.560 T9.615 T9.670 EPM according to the load on transmission, PTO and hydraulics. 36 41 45 50 71 61 BTS 100012 INB 15/12/09 rd.qxd 4 5 4-01-2011 15:44 Pagina 4 OPERATOR ENVIRONMENT A GREAT VIEW FROM THE MOST COMFORTABLE AND QUIETEST CAB IN THE BUSINESS CAB THAT WORKS WITH YOU, DAY IN, DAY OUT Step into the spacious cab through the frameless door. Settle into the seat and rest your arm on the SideWinder™ II armrest. Activate the buttons on the CommandGrip™ handle and remote valve paddles. Swap through the menus on the IntelliView™ III touchscreen monitor. Fire up the engine and feel its smooth quiet power. Welcome to New Holland. SETTLE IN AND ENJOY THE RIDE New Holland Comfort Ride™ cab suspension, offered on all T9 Series tractors, is revolutionary. All four corners of the cab are suspended on spring and damper units with a sophisticated anti-sway system to ensure you get a smooth and stable ride. Captive pin mounts provide full roll over protection. BTS 100012 INB 15/12/09 rd.qxd 4-01-2011 15:44 Pagina 5 YOUR UPGRADE TO BUSINESS CLASS T9 operators are surrounded by comfort and convenience features. Leather seat, foot rests, carpet, sunshades, climate control, electrically adjusted mirrors and a fantastic view in every direction. Just some of the creature comforts waiting for you aboard a T9 tractor. FROM DUSK TO DAWN Cab roof, engine hood and fender worklights are easily controlled from a dedicated switch panel. A 360 degree lighting package supplies a combination of HID and halogen lights. Delayed lighting ensures that you can leave the tractor in safety before the lights are turned off. L ANGLE 40° SWIVE AUTO COMFORT™ SEAT SWIVEL FOR ULTIMATE COMFORT Operator comfort is a key New Holland priority. The advanced Auto Comfort™ seat automatically adjusts to the weight of the operator. Offering precision controlled damping, the seat automatically reacts to shock loads before they reach the operator. Operators who extensively use large rear equipment will be able work in absolute comfort, thanks to the seat’s 40° swivel angle. Moreover, the SideWinder™ II armrest moves with the seat, so the controls are always where you need them, at the tip of your fingers. BTS 100012 INB 15/12/09 rd.qxd 6 7 4-01-2011 15:44 Pagina 6 SIDEWINDER™ II ARMREST & COMMANDGRIP™ HANDLE SIDEWINDER II. DESIGNED AROUND YOU As modern tractors offer increasingly sophisticated features there is a risk that they become more difficult to understand and operate. At New Holland we listened to our customers and developed the SideWinder™ II armrest to make everything simpler. All key controls are accessed from the armrest. Throttle, transmission and hydraulics. Everything you need to control is quickly and easily accessible. More advanced features can also be quickly accessed. Get in. Settle down. Job done. INTELLIVIEW™ III TOUCHSCREEN All the information you need at a glance. Fingertip adjustment of all key settings and compatible with the New Holland IntelliSteer™ guidance system. • Headland turn sequencing, HTS. Press to record, store and activate automated headland turn. • Finger tip control for up to two remote valves. • Rear linkage raise lower. • IntelliSteer™ autoguidance, automated steering engagement. • Forward reverse shuttle switch. • Change transmission ratio up and down. • Ground Speed Management, GSM. Transmission and engine work together to optimise performance. As awarded by The Chicago Athenaeum: Museum of Architecture and Design. BTS 100012 INB 15/12/09 rd.qxd 4-01-2011 15:44 Pagina 7 EASY ACCESS TO ADVANCED FEATURES Push the symbol. Activate the feature. The Integrated Control Panel, ICP, makes it simple to access advanced operating features. No need to scroll through menus to set up differential locks, HTS headland turn sequencing or ESM Engine Speed Managment. • Optional automatic engine braking activation • Throttle up to your desired engine speed, select Engine Speed Management, and the speed is fixed. • Press the Headland Turn Sequencing button to record and replay the functions you use most frequently. • Engage the rear and the front differential locks, true traction. • Three point hitch control for hitching implements. • Multifunction joystick. The joystick can be set to operate up to 4 remote valves. • Electronic remotes. Easy to reach paddles provide fingertip hydraulic operation. Flow and timing can be simply adjusted through the IntelliView™ III touch screen. • Linkage control mouse. Provides precise control of the massive rear three point linkage. • Full access to further advanced controls under the padded armrest. • Electronic SideWinder™ II adjustment. Move the armrest to the position that suits you. BTS 100012 INB 15/12/09 rd.qxd 8 9 4-01-2011 15:44 Pagina 8 PLM NEW HOLLAND GUIDANCE SYSTEMS TO MATCH YOUR NEEDS ALL WIRED UP READY FOR YOUR CHOSEN GUIDANCE SYSTEM Series T9 tractors are standard with a fully integrated New Holland designed and developed IntelliSteer™ Automatic Steering System. Matching DGPS or RTK Technology to fully integrated control, IntelliSteer helps ensure parallel pass to pass accuracy of up to 1-2cm*. IntelliSteer is ideal for precision work in even the most demanding situations. It is designed to dramatically improve operator performance and comfort. All this and more at the touch of a button. * Using RTK correction signal. FULLY INTEGRATED INTELLISTEER™ GUIDANCE Guidance system choice will relate to the intended applications and the need to integrate with existing systems. With T9 Series tractors, all IntelliSteer options operate via factory installed systems that facilitate installation and upgrades. This enables the selected package to be modified and upgraded simply and more economically. INTELLIVIEW - VISIBLE INTELLIGENCE INTEGRATED CONTROL SYSTEMS The standard IntelliView™ III monitor can be used to set up the New Holland auto guidance systems, and includes a visual interface that can be employed when operating the IntelliSteer™ system. The IntelliView™ III monitor has a touchscreen display which allows the programming of a variety of guidance paths, from straight A-B runs to the most complex adaptive curves. You can also personalize your settings simply and easily and even transfer information from your tractor, direct to your Precision Farming software. The New Holland IntelliSteer™ System uses built-in T3 terrain compensated correction signals (roll, pitch, yaw) to keep the Navigation Controller II informed of the tractor’s orientation. Also integrated into the hydraulic system is a control valve which converts the signals from the Navigation Controller II into hydraulic movements of the steering system. •BTS 100012 INB 15/12/09 rd.qxd 5-01-2011 17:08 Pagina 9 IMPROVED PROFIT IntelliSteer helps improve overall operating efficiency. In poor light or during long working days, precision driving is not compromised. Improved efficiency saves money. It is as simple as that. Total cost savings with auto guidance (£) 4,000 GOOD GUIDANCE SAVES MONEY £2803 3,000 2,000 £2247 £1503 1,000 0 EGNOS 15 HP/XP EGNOS OmniSTAR XP OmniSTAR HP RTK VRS 20 cm 7 cm 5 cm 2.5 cm 20 25 ® 30 5 6 7 8 9 10 ® 3 4 5 6 0 1 RTK RTK GPS 2.5 cm 2 0 1 2 LEVELS OF ACCURACY AND REPEATABILITY New Holland offer four levels of accuracy. This enables you to select the right IntelliSteer™ system to match your needs and budget. When using RTK correction with IntelliSteer it is possible to deliver year on year repeatability. RTK BASE STATION An RTK base station can be used to a correction signal to achieve a pass to pass accuracy of 1-2cm. INTELLISTEER. ON AND OFF SIMPLICITY FULL LASER LEVELLING INTERFACE The CommandGrip™ handle incorporates a single button that is used to activate the IntelliSteer system. New Holland makes advanced technology accessible. The electro-hydraulic system of T9 scraper tractors is ‘plug and play’ compatible with a wide range of third-party laser controlled levelling systems. NH 262 RECEIVER The NH 262 receiver is fully compliant with with EGNOS, OmniSTAR or RTK correction. For RTK applications, a slim profile radio mounts underneath the receiver. BTS 100012 INB 15/12/09 rd.qxd 4-01-2011 15:45 Pagina 10 10 11 ENGINE ULTIMATE ENGINE BREATHABILITY T9 tractors are powered by the same family of advanced Tier 4A compliant Cursor engines used in New Holland CX combines. New Holland’s engine development partner, Fiat Powertrain Technologies, has already produced over 150,000 SCR engines during the past five years. The proven SCR technology uses AdBlue® to transform the harmful nitrogen oxides contained in the exhaust gas into harmless water and nitrogen. This after-treatment system is separate from the main engine which means only clean, fresh air is fed into the engine. What does this mean? Clean running power units that offer improved performance and enhanced fuel efficiency. Supply module AdBlue/DEF additive AdBlue/DEF tank Dosing module Exhaust gas containing NOx SCR Catalyst Nitrogen and Water 700 Power output [hp(CV)] 600 EPM Rated power 500 400 300 200 100 0 T9.390 T9.450 T9.505 T9.560 T9.615 T9.670 SCR: YOUR POWER GUARANTEE CLEAN RUNNING THAT SAVES MONEY SCR guarantees exceptional performance and high productivity, independent of fuel quality, sulphur levels and without the need for costly diesel additives. More power from less fuel with clean emissions. T9 tractors with their SCR engines suffer no performance constraints as a result of meeting the strict Tier4A regulations. More power, increased torque while reducing overall running costs, including a 600 hour service interval, are all benefits of the SCR solution. Where does AdBlue® fit into the equation? Well, it’s already been accounted for, and if that wasn’t enough. AdBlue® should not be looked at as an extra cost, it’s your route to a lower fuel bill. Whatever you spend on AdBlue®, it is paid for several times over by the reduction in fuel consumption and the increase in output! Improved environmental profile and reduced operating costs: it’s a win-win situation. BTS 100012 INB 15/12/09 rd.qxd 4-01-2011 15:45 Pagina 11 ENGINE SPEED MANAGEMENT In applications where a constant hydraulic flow or PTO speed are required, the operator can select Engine Speed Management. This will ensure this selected engine speed is constantly maintained under changing loads. Engine speed Horsepower 71hp(CV) EPM according to the load on transmission, PTO and hydraulics. EPM AND POWER GROWTH DESIGNED AND BUILT BY FPT Either with the Engine Power Management or through natural power growth, T9 will deliver substantial increases in power over the standard rated measurement. The T9.560 increases its power by as much as 50hp(CV) as peak power is reached or the EPM is active. Your output is the winner. Powerful engines designed for a long life. Fiat Powertrain Technologies have an enormous experience in the manufacture of high powered diesel engines. The knowledge brings you peace of mind that a T9 will perform and keep performing. “The AdBlue system is very easy to use and it certainly didn’t cost us anymore, in fuel in fact there are fuel savings so that’s a massive benefit and we would certainly be looking to replace our existing tractor with this system.” James Wallis - Farmer - UK BTS 100012 INB 15/12/09 rd.qxd 4-01-2011 15:45 Pagina 12 12 13 TRANSMISSION PROVEN DESIGN, MODERN CONTROL Reverse THE FULL POWERSHIFT, TOUGHENED UP Now with added strength and improved control, the Ultra Command™ full powershift transmissions developed for T9 tractors is something special. First, it benefits from a new control system using the CommandGrip™ handle. This provides finger tip access to ‘manual’ push button shifts and automated Ground Speed Management. Transport time between fields is kept to a minimum with a top speed of 37kph. Forward 37 16 Hi 31 16 Lo 25.7 15 21.4 14 17.7 13 15.4 12 13.5 6.1 20 10 11 14 10 12.9 9 11.6 8 10.6 7 9.7 6 8.9 5 8 4 6.9 3 5.8 2 4.8 1 0 4 10 20 30 40 kph INTELLIVIEW III - GEAR AND SPEED AT A GLANCE The standard IntelliView™ III display offers easy toggling between menus to display information including the exact engine speed and the selected transmission ratio. This information is duplicated by the ‘A’ pillar display, ensuring the operator always has key operating data to hand. BTS 100012 INB 15/12/09 rd.qxd 4-01-2011 15:45 Pagina 13 GSM. INTELLIGENT AUTOMATION New Holland Ground Speed Management, GSM, is more than just an automated transmission shift system. With CVT-like functionality, it uses a combination of data relating to engine load, forward speed and operator setting, to manage both engine and transmission speeds to optimise performance and economy. Simple to set up and extremely efficient, GSM is well proven and dependable. ENGINE POWER GEARS 9 SPEED 8 9 7 6 7 FIXED FORWARD SPEED? GSM TAKES CARE OF IT When load conditions change in the field, GSM will automatically maintain a fixed forward speed. The operator first sets the desired working speed and then selects the GSM function. The automated system will then match engine and transmission speeds to maintain this fixed forward speed, to deliver the perfect balance between maintaining productivity without compromising economy. FULL COMMAND IN TRANSPORT During road transport, GSM will automatically shift the transmission according to load and throttle settings. EASY SHUTTLE The forward reverse shuttle is operated via a steering column lever or the CommandGrip™ handle fitted on the SideWinder™ II armrest. Two methods of changing direction, you choose the most convenient for your job. To reduce shock loads on the transmission, the shuttle clutch pack is fully modulated for a smooth change in travel direction. 8 9 10 BTS 100012 INB 15/12/09 rd.qxd 4-01-2011 15:45 Pagina 14 14 15 AXLES & TRACTION WE HAVE THE TRACTOR THAT ANSWERS YOUR NEEDS. The new narrow frame of the T9.390 to T9.560 allows these high powered tractors to be far more flexible in the work they do. No longer confined to large fields, T9 has the maneuverability of far smaller tractors. Thanks to a 42 degree pivot angle the turning radius is just 4900mm. Fast headland turns with no soil smearing, that’s another T9 advantage. STANDARD FRAME STANDARD FRAME WIDE FRAME 900/60R42 super singles 520/85 R46 duals 710/70R42 duals 2032mm 1626mm 2006mm 2932mm 3365mm 4622mm TRUE TRACTION With a high powered pivot steer tractor, you have the benefit of true four wheel drive. Individual control of a front and rear differential lock will ensure that when conditions become tough, you’ll have the best chance of pulling through rather than parking up. BTS 100012 INB 15/12/09 rd.qxd 4-01-2011 15:45 Pagina 15 AXLES BUILT FOR THE JOB Regardless of frame size, T9 axles have been engineered and built to stand up to even the most demanding conditions. These tough axles handle high torque loads with ease, and also offer absolute operator comfort. How? They feature planetary input gears for the ultimate in quiet operation. THE RIGHT WHEELS AND TYRES FOR YOUR APPLICATION T9 has been engineered to take the tallest of tyres. Larger diameter tyres increase the tyre footprint length to maximise traction without adding extra width. The 900/60R42 single tyres keep the overall width to 3 metres, making the T9 simple to move around. MORE STOPPING POWER T9 tractors are fitted with a completely new braking system. Both the transport and park brakes are more powerful with a trailer braking circuit included as standard. Optional automatic engine braking is activated during transport. This uses the engine to slow the tractor when the throttle is fully released. BTS 100012 INB 15/12/09 rd.qxd 4-01-2011 15:45 Pagina 16 16 17 REAR LINKAGE ROBUST DESIGN MEETS PERFECT BALANCE New Holland T9 tractors use an exceptionally robust articulated Tri-Point chassis. Engineered to reduce maintenance and provide exceptional strength, the Tri-Point system ensures a well balanced weight transfer between the front and rear axles. In both drawbar and three-point linkage applications, significantly less ballast is required. This can assist owners seeking to reduce equipment weights to meet the demands of controlled traffic farming. T9 scraper tractors use the same Tri-Point chassis. No costly modifications are needed. STRENGTH MEETS FLEXIBLE DESIGN All models can be equipped with a CAT IV-N quick-hitch rear linkage, convertible to CAT III on standard frame models. Lift capacity rises to over 9071kg on standard frame tractors, in line with the high power output of the T9.560. A 20 spline 1000 speed PTO option is also available. DRAWBAR OPTIONS A heat-treated two position agricultural solid bar is fitted to standard frame models. A heavy duty Class 5 is offered on wide chassis models. For scraper models, a quick-hitch drawbar is Standard. Load capacities can be in excess of 4983kg on all T9 tractors, dependent on drawbar choice. BTS 100012 INB 15/12/09 rd.qxd 4-01-2011 15:45 Pagina 17 T9: BUILT SCRAPER READY T9 tractors can be factory specified to meed the demands of scraper operators. Choices include heavy duty axles and a purpose developed drawbar. With combined high capacity and MegaFlow™ pump options, hydraulic output can reach 428 litres per minute. THE RIGHT BALANCE It takes experience to ballast an articulated tractor correctly. Get the weights wrong, and performance, fuel use, soil compaction and productivity can all suffer. At New Holland we have established ballast guidelines that make it easier to optimise ballast, with purpose-developed weight packs that can be tailored to match your needs. BTS 100012 INB 15/12/09 rd.qxd 4-01-2011 15:45 Pagina 18 18 19 HYDRAULICS IMPRESSIVE HYDRAULIC FLOW T9 tractors have a high flow pump with a 216lpm as standard. For demanding hydraulic applications, an optional MegaFlow™ pump is available which delivers an extra 212lpm of hydraulic flow to one bank of remotes. For those who require the ultimate in hydraulic flow, the MegaFlow™ II option is available ensuring total hydraulic flow is available to all remotes. A large coupler is available for applications that demand unrestricted oil flow. BTS 100012 INB 15/12/09 rd.qxd 4-01-2011 15:45 Pagina 19 UP TO EIGHT ELECTRONIC REMOTES The remote valves fitted to T9 tractors are easily identifiable and to relate to their in-cab control. The operator can access all eight without having to move away from the comfort of the SideWinder™ II armrest. Four colour-coded paddles and a centrally positioned joystick make it simpler to identify and work each remote with exact precision. The CommandGrip will also give access to two valves. Flow, timing and detent settings can be set to precisely match the job in hand. Each valve can also be programmed into the Headland Turn Sequence. FLOW CONTROL USING THE INTELLIVIEW III The IntelliView™ III touchscreen makes setting flow rates to individual valves simplicity itself. Scroll through the menus and select valve control. Choose the outlet you wish to adjust, and drag the slider with your finger to the desired setting. Job done. HEADLAND TURN SEQUENCE Headland Turn Sequence has been refined and developed by New Holland to ensure ease of use and set-up. For complex applications, including operating the very widest tillage equipment, HTS really can reduce operator fatigue. Of equal importance, the operator can use HTS to manage some operations but leave others to manual control. The choice is theirs. Set up is simply a case of recording the desired operations at the headland. The actions can then be repeated, automatically, by pressing the dedicated button on the CommandGrip™ handle. 8 sec 5 sec 8 sec 5 sec BTS 100012 INB 15/12/09 rd.qxd 4-01-2011 15:45 Pagina 20 20 21 SERVICE AND BEYOND THE PRODUCT 360°: T9 The new T9 range has been designed to spend more time working and less time in the yard. All service points are easy to access, and super long service intervals mean they will spend more time in their natural environment: the field! • Steps make it easier to clean the expansive glazing of the four pillar cab. • A dedicated hatch provides fast and easy access to the engine air filter. There is no need to lift the engine hood • Single piece engine hood opens wide for full service access. • Engine and hydraulic oil check and fill points are easy to reach making routine checks fast and servicing simpler. Engine service intervals have been extended to 600 hours. • Cooling package opens out to make cleaning faster and easier. • Tool boxes are conveniently mounted on both slides of the tractor for easy access and storage WILL I BE ABLE TO FIND ADBLUE® EASILY? The answer is yes! It will be available on your doorstep, through CNH Parts & Service; just contact your local dealer for more information. If that wasn’t enough, AdBlue® can even be delivered direct to your farm for absolute convenience. • The 234 litre AdBlue® additive tank has a filler neck which prevents filling it with fuel. It only needs to be filled once every two refills of the 1729 litre fuel tank. BTS 100012 INB 15/12/09 rd.qxd 4-01-2011 15:45 Pagina 21 FINANCE TAILORED TO YOUR BUSINESS TRAINED TO GIVE YOU THE BEST SUPPORT SERVICE PLUS LONG LASTING CONFIDENCE CNH Capital, the financial services company of New Holland, is well established and respected within the agricultural sector. Advice and finance packages tailored to your specific needs are available. With CNH Capital, you have the peace of mind that comes from dealing with a financing company that specialises in agriculture Your dedicated New Holland dealer technicians receive regular training updates. These are carried out both through on-line courses as well as intensive classroom sessions. This advanced approach ensures your dealer will always have the skills needed to look after the latest and most advanced New Holland products. Service Plus coverage from Covéa Fleet provides owners of New Holland agricultural machinery with additional cover on the expiry of the manufacturer’s contractual warranty. Please ask your dealer for more details. Terms and conditions apply. DEALER INSTALLED ACCESSORIES A comprehensive range of approved accessories to optimise machine performance in all conditions can be supplied and fitted by your dealer. R E D A E L L A R U T A N WWW.NEWHOLLANDSTYLE.COM Want to make New Holland a part of your everyday life? Browse the comprehensive selection on www.newhollandstyle.com. A whole range of items are available including hard wearing work clothing and a vast selection of scale models, together with so much more. New Holland. As individual as you. BTS 100012 INB 15/12/09 rd.qxd 4-01-2011 15:45 Pagina 22 22 23 SPECIFICATIONS MODELS T9.39O T9.45O T9.5O5 T9.56O T9.615 T9.67O New Holland Engine* FPT Cursor 9 FPT Cursor 13 FPT Cursor 13 FPT Cursor 13 FPT Cursor 13 Two stage Turbo FPT Cursor 13 Two stage Turbo No. of cylinders/Aspiration/Valves/Emission level Selective Catalytic Reduction system (SCR) 6/WT/4/Tier 4A 6/WT/4/Tier 4A 6/WT/4/Tier 4A 6/WT/4/Tier 4A 6/WT/4/Tier 4A 6/WT/4/Tier 4A ● ● ● ● ● ● (cm3) 8700 (mm) 117x135 12700 135x150 12700 135x150 12700 135x150 12700 135x150 12700 135x150 [kW/hp(CV)] 287/390 328/446 369/502 410/557 451/613 492/669 [kW/hp(CV)] 287/390 328/446 369/502 410/557 439/597 492/669 [kW/hp(CV)] 287/390 328/446 365/496 403/548 440/598 477/648 Capacity Bore and stroke Max. EPM horsepower ISO TR14396 - ECE R120 Max. horsepower ISO TR14396 - ECE R120 Rated EPM horsepower ISO TR14396 - ECE R120 Rated horsepower ISO TR14396 - ECE R120 Rated engine speed Max. torque - ISO TR14396 Torque rise Viscous coupled cooling fan [kW/hp(CV)] 261/354 (rpm) 2000 (Nm) 1745 @ 1400 (%) 40 ● Hydraulically driven cooling fan Earth friendly engine oil filter Automatic exhaust brake Diesel capacity 336/457 373/507 399/542 447/608 2100 2136 @ 1400 2100 2374 @ 1400 2100 2540 @ 1400 2100 2848 @ 1400 40 40 40 ● ● ● 40 – 40 – – – – – ● ● ● ● ● ● ● ● O O O O O O 1230 1230 1230 1168 1729 174 600 174 600 174 600 234 600 234 600 234 600 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 4 4 4 4 4 4 200 2x1000 200 2x1000 200 2x1000 200 2x1000 200 2x1000 200 2x1000 (Litres) 870 DEF/AdBlue® tank capacity (Litres) Service interval (hours) Transmission IntelliShift™ system Ground Speed Management system (GSM) 16x2 Ultra Command™ Full-Powershift (40kph) Min. speed (kph) Electrical 12 volt alternator (Amps) Battery capacity (CCA) Axles 4WD front axle Articulation angle (°) Turning radius (mm) Front and rear differential locks Hydraulics Closed Centre Load Sensing (CCLS) Main pump flow (Lpm) MegaFlow™ option pump flow Standard / High flow (Lpm) Electronic Position Control Remote valves Type Max. no. rear valves Joystick control Rear linkage Rear linkage category Max. lift capacity through the range (610mm behind ball ends) (kg) Rear PTO Auto Soft Start Engine speed at 1000rpm (rpm) Brakes Transmission park lock Exhaust brake Hydraulic trailer brakes 298/405 2100 1899 @ 1400 ● ● ● ● ● ● 42 4900 42 4900 42 4900 42 4900 38 5700 38 5700 ● ● ● ● ● ● ● ● ● ● ● ● 208 408 216 428 216 428 216 428 216 428 216 428 O O O O O O Electro hydraulic 8 Electro hydraulic 8 Electro hydraulic 8 Electro hydraulic 8 Electro hydraulic 8 Electro hydraulic 8 ● ● ● ● ● ● O O O O O O IV-N / III IV-N / III IV-N / III IV-N / III IV-N IV-N 9071 9071 9071 9071 8900 8900 O O O O O O ● ● ● ● ● ● 2000 2000 2000 2000 2000 2000 ● ● ● ● ● ● O O O O O O ● ● ● ● ● ● BTS 100012 INB 15/12/09 rd.qxd 4-01-2011 15:45 Pagina 23 MODELS T9.39O T9.45O T9.5O5 T9.56O T9.615 T9.67O Cab 360° 4 pillar cab with FOPS - OECD Code 10 Level 1 ● ● ● ● ● ● 2 2 2 2 2 2 ● ● ● ● ● ● Auto Comfort™ leather seat with seat belt Instructors seat with seat belt ● ● ● ● ● ● ● ● ● ● ● ● SideWinder™ II armrest CommandGrip™ handle ● ● ● ● ● ● ● ● ● ● ● ● Electronic adjustment of SideWinder™ II armrest Air conditioning ● ● ● ● ● ● ● ● ● ● ● ● Automatic climate control Air recirculation filters ● ● ● ● ● ● ● ● ● ● ● ● Electronic remotely adjustable mirrors Comfort Ride™ cab suspension ● ● ● ● ● ● O O O O O O Headland Turn Sequence (HTS) Remote control for rear linkage ● ● ● ● ● ● O O O O O O A pillar performance monitor with enhanced key pad IntelliView™ III colour monitor with ISO 11783 connector ● ● ● ● ● ● ● ● ● ● ● ● IntelliSteer™ guidance ready Factory fit rotating beacons (2) ● ● ● ● ● ● ● ● ● ● ● ● 15042 22453 15626 22453 16895 22453 18068 25401 20134 25401 Cab category level - EN 15695 HID lighting pack Weights Min. unballasted / shipping weights (no rear linkage or PTO fitted) Max. permissible weight ● Standard O Optional – Not available (kg) 14951 (kg) 19051 * Developed by FPT - Fiat Powertrain Technologies ** Conditions apply C D F A B MODELS Dimensions With rear tyre size** A Overall length inc. front weight pack and rear drawbar(mm) B Min. width across bar axle (mm) C Height at centre of rear axle to top of cab (mm) D Overall height (mm) E Wheelbase (mm) F Ground clearance (depends on drawbar) (mm) ** Contact your New Holland dealership for the full range of tyre sizes available. E T9.390 - T9.560 T9.615 - T9.670 710/70R42 - Singles 7393 3048 2794 3843 3759 443 710/70R42 - Singles 7615 3048 2903 3963 3911 447 BTS 100012 INB 15/12/09 rd.qxd 4-01-2011 15:45 Pagina 24 NEW HOLLAND TOP SERVICE: CUSTOMER SUPPORT AND CUSTOMER INFORMATION TOP AVAILABILITY. TOP SPEED. TOP PRIORITY. TOP SATISFACTION. If you need information, or have an out of hours question, ring our toll-free number*. All day, every day, we are just a call away. Express parts delivery: when you need it, where you need it! Fast-track solution during the season: because your harvest can’t wait! We drive and track the solution you need, keeping you informed: until you are 100% satisfied! * Calls to the Top Service team are free from landlines in the United Kingdom and Republic of Ireland. UK-based mobile calls are also free, but Republic of Ireland mobile users should call 01 2421881 and this will be charged at your standard network rate. AT YOUR OWN DEALER Visit our web site for UK: www.newholland.com/uk - for ROI: www.newholland.com/ie The data indicated in this folder are approximate. The models described here can be subjected to modifications without any notice by the manufacturer. The drawings and photos may refer to equipment that is either optional or intended for other countries. Please apply to our Sales Network for any further information. Published by New Holland Brand Communications. Bts Adv. - Printed in Italy - 15/12/09 - TP01 - (Turin) - 100012/INB New Holland prefers lubricants For more details, ask your New Holland dealer!
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project