Voice Evacuation
VM-3000 - VX-2000 - SX-2000
Integrated Voice Alarm Management & Evacuation Systems
TOA Electronics Europe GmbH
Suederstr. 282 20537 Hamburg Germany
Telephone: +49 (0) 40-25 17 19 0 Facsimile: +49 (0) 40-25 17 19 98
Web site: www.toa.eu
the future is safe & sound
Content
TOA Quality Assurance
VM-3000 Series
PA Management System
System Mangement Amplifier
Extension Amplifier
Application Example
Emergency Remote Microphone
Remote Microphone
The EN 54 Marque - TOA's Commitment to Quality
EN 54 is a standard marque of the European Union (EU) for fire detection
and fire alarm systems. The relevant parts to the voice alarm and audio industry are part
16, which are concerned with voice alarm control and indicating equipment (VACIE),
part 24, refers to loudspeakers and part 4, refers to power supplies
The EN 54 standard is a EU regulation and therefore mandatory in each
EU member state without the necessity of being adopted as a national standard.
It belongs to the Construction Product Directive (CPD, 89/106/EEC) and requires a
certification by a notified body (which ensures a high product quality and reliability).
The EN 54 will come into force April 2011
It is imperative that installers and consultants follow these new regulations in order to
maintain the continuity of quality and safety when designing and installing voice alarm
systems. This will enable them to spearhead better integration of Voice Alarm (VA) and
Public Address (PA) as the directive takes hold. Furthermore EN 54 will play a significant
role in the market for Voice Evacuation as the member states of the European Union will
be obliged to replace their local standards with the EN 54 standard by April 2011.
As part of TOA’s commitment to professionalism, quality, service and support, we pride
ourselves on being the first to be awarded this prestigious and highly respected award.
04
05
07
08
09
10
VX-2000 Series
Audio Management System
System Manager
Surveillance Frame
Emergency & Standard Supply
Power Supply
System Amplifier
Emergency Remote Microphone
Remote Microphone
System Configuration
Modules
12
13
14
15
16
17
19
20
21
22
SX-2000 Series
SX-2000 Network Audio Managemet System
System Management Amplifier
Audio Input Unit
System Remote Microphone & Modules for SX-2000AI
Audio Output Unit for SX-2000AO
Control Input Unit for SX-2000CI
Control Output Unit for SX-2000CO
Remote Microphone Interface Module
System Configuration
Emergency Remote Microphone
Remote Microphone
28
29
30
31
33
35
36
37
38
39
40
Speakers
Metal Cabinet Speaker
Firedome Ceiling Mount Speaker
F-Series Wide Dispersion Flush Mounted Ceiling Speakers
Splashproof Projection Speaker
2-Way Wide Dispersion Ceiling Speakers
Box Speaker
Reflex Horn Speaker
Projection Speaker - Ceiling & Wall
42
43
44
49
50
51
52
53
Line Array Performance Speakers
Type-H
Type-S
56
59
Human society with Sound & Communication
01
02
VM-3000 series
PA Management System
VM-3000 - Description
The VM-3000 Series is digitally audio processed and controlled, with fully digital audio mixing and a
built-in high-quality electronic voice message feature. The system may be set up directly using the controls and LCD display on the front panel, which also enables easy operation of the system. Operational
versatility is further enhanced by a dedicated PC software configuration capability for uploading and
downloading settings via LAN.
The incorporation of wide-ranging functional capabilities, superb reliability and versatility make the VM3000 a highly cost-effective emergency broadcast system.
Emergency Functions
System Features
Max. 4 MIC/LINE inputs
2 BGM inputs
Up to 4 Remote Microphones connectable
(max. 2 Fireman‘s Microphones)
Max. 60 assignable speaker zone outputs
(6 zones per amplifier)
Volume setting possible for each zone
Digital audio processed & controlled
Full digital audio mixing (DSP)
Built-in high quality electronic voice message
Intuitive configuration
Zone setting, priority setting, failure detection
setting by dedicated PC software
LCD display of current status and configuration
setting of system units.
EN54
EN54
4
24
Continuous speaker line monitoring without
interruption of BGM distribution or paging
announcements
Complete fault detection and indication
Both built-in and remote Fireman’s
Microphones
Built-in voice alarm message
2-Phase voice alarm message (Alert and
Evacuation) broadcasting
Paging Functions
2 Remote Microphone interface lines
Paging (All zones/Group/Individual)
2-channel broadcast with external amplifier
(Paging/BGM)
First fully EN 54 certified voice alarm system
03
04
VM-3000 Series
System Management Amplifier
VM-3000 Series
System Management Amplifier
EN54
16
VM-3240VA/VM-3360VA
Features
Central units in the VM-3000 system
Power outputs 240 W (VM-3240VA) and
360 W (VM-3360VA)
1 unit per system
Front panel-mounted LCD display for
Setting and operation status
Automatic message function
Play back of up to 6 recorded general
announcements and 2 recorded emergency
announcements
Up to 2 RM-300MF Emergency Remote
Fireman’s Microphones can be connected
Up to a total of 4 RM-200M General Broadcast
Remote Microphones and RM-300MF
Fireman’s Microphones can be connected
05
Specifications
VM-3240VA
Power Requirement
Power Consumption (AC mains)
230 V AC, 50/60 Hz
600 W (with rated output signal), 260 W
850 W (with rated output signal), 380 W
(according to EN60065)
(according to EN60065)
240W
360W
50 – 20,000 Hz, ±3dB (at 1/3 rated output)
50 – 20,000 Hz, ±3dB (at 1/3 rated output)
Under 0.8% (at rated output, 1kHz)
Under 0.8% (at rated output, 1kHz)
Over 85dB
Over 85dB
Input 1 – 3: -50 dB* (MIC)/-10dB (LINE) (changeable) 600 Ohm, electronically balanced combined
XLR connector (female)/phone jack
Input 4: -50 dB* (MIC) / -10 dB (LINE) (changeable) 600 Ohm, electronically balanced, removable terminal
block (14 pins)
BGM 1 – 2 : -10 dB, 10 kOhm unbalanced, RCA pin jack
External amplifier Input: 100 V Line removable terminal block (14 pins)
Speaker output 1 – 6: Total within rated output, removable terminal block (14 pins), Direct output from
internal or external amplifier, removable terminal block (16 pins)
Recording output BGM / Paging 0 dB*, 10 kOhm, unbalanced, RCA pin jack
Input 1 – 8: No-Voltage make contact input, open voltage: 24V DC, short-circuit current: under 2mA,
removable terminal block (14 pins)
Output 1 – 8: Isolated open collector output, with stand voltage: 30V DC, operating current: under 10mA,
removable terminal block (14 pins)
Input 1 – 5: No-Voltage make contact input, open voltage : 24V DC, short-circuit current: under 2mA, RJ45
female connector
Input 6: Isolated voltage input: Inactive; -24V ±20%/Active; +24V ±20%, RJ45 female connector
Status out: Relay contact output, withstand voltage: 40V DC, operating current: 2 – 300mA,
RJ45 female connector
24 V DC, naximum feeding current 0.3 A
24V DC ±10% Maximum feeding current 0.4A
482 (W) x 132.6 (H) x 460 (D)mm
482 (W) x 132.6 (H) x 460 (D)mm
16.5 kg
19kg
Rated Output
Frequency Response
Distortion
Signal-to-Noise Ratio
Inputs
Options
VM-3240E: 240 W Extension Amplifier
VM-3360E: 360 W Extension Amplifier
RM-300MF: Emergency Microphone
RM-200M: Remote Microphone
IT-450: Input Transformer
Outputs
Control
Emergency Control
DC-24 V-Output
Dimensions (W x H x D)
Weight
VM-3360VA
06
VM-3000 Series
Extension Amplifier
VM-3000 Series
Application Example
EN54
16
First fully EN 54 Certified Voice Alarm System
VM-3240E/VM-3360E
Features
• System can be expanded by connecting up to
9 VM-3240E or VM-3360E Extension Amplifiers.
The 240 W VM-3240E and 360 W VM-3360E are
both equipped with 6 speaker line outputs.
Both also feature 8 contact inputs and 8 contact outputs for general broadcasts and 6 in
puts and 3 outputs for emergency broadcasts.
They are connected to the VM-3240VA or VM3360VA via the VM Link connector.
Options
VM-3240VA: 240 W System Amplifier
VM-3360VA: 360 W System Amplifier
IT-450: Input Transformer
Specifications
VM-3240E
Power Requirement
Power Consumption (AC mains)
230 V AC, 50/60 Hz
600 W (with rated output signal), 260 W
850 W (with rated output signal), 380 W
(according to EN60065)
(according to EN60065)
240W
360W
50 – 20,000 Hz, ±3dB (at 1/3 rated output)
50 – 20,000 Hz, ±3dB (at 1/3 rated output)
Under 0.7% (at rated output, 1kHz)
Under 0.8% (at rated output, 1kHz)
Over 85dB
Over 85dB
External amplifier Input: 100 V Line removable terminal block(14 pins)
Speaker output 1 – 6: Total within rated output, removable terminal block (14 pins)
Direct output from internal or external amplifier, removable terminal block (16 pins)
Input 1 – 8: No-Voltage make contact input, open voltage: 24V DC, short-circuit current: under 2mA,
removable terminal block (14 pins)
1 – 8: Isolated open collector output, withstand voltage: 30V DC, operating current: under 10mA,
removable terminal block (14 pins)
Input 1 – 5: No-Voltage make contact input, open voltage : 24V DC, short-circuit current: under 2mA, RJ45
female connector
Input 6: Isolated voltage input: Inactive; -24V ±20%/Active; +24V ±20%, RJ45 female connector
Status out: Relay contact output, withstand voltage: 40V DC, operating current:
2 – 300mA, RJ45 female connector
24 V DC, maximum feeding current 0.3 A
24V DC. maximum feeding current 0.4A
482 x 132.6 x 407
482 (W) x 132.6 (H) x 460 (D)mm
16.5 kg
19 kg
Rated Output
Frequency Response
Distortion
Signal-to-Noise Ratio
Inputs
Outputs
Control
Output
Emergency Control
DC-24 V-Output
Dimensions (W x H x D)
Weight
07
EN54-16 Certificate No. 1438/CPD/0180
VM-3360E
08
VM-3000 Series
Extension
Amplifier
Emergency
Remote
Microphone
VM-3000 Series
Remote Microphone
Alarm Switch
RM-200M/RM-210
RM-210
WRM-200
Features
RM-300MF
Microphone
Features
• Exclusively for broadcasts made
by firemen in emergency situations
• For activation of emergency mode, start and
stop automatic broadcasts of emergency
announcements, reset emergency signals,
and live microphone announcements
CPU OFF switch allows all-zone calls
(simultaneous attenuator-free global calls).
No general broadcasts can be made.
RM-320F
The RM-320F Emergency Microphone
Extension enables zone selection or failure
indication/failure acknowledgment function.
Up to 3 RM-320Fs can be connected to the
Emergency Microphone, expanding the
available keys up to 20 per unit.
20 function buttons per unit.
Zone selection (1 – 20) and failure
indication/acknowledgement functions can
be assigned to each function key using the
dedicated software.
Specifications
RM-300MF
Power Requirement
Current Consumption
Distortion
Frequency Response
Signal-to-Noise Ratio
Audio Output
Microphone
Volume Control
Operation key
Key Extension
Connection Cable
24 V DC (Operating range: 14 – 28 V DC)
From RM-200X/M/XF
100 mA (up to 550 mA with 3x RM-320F)
155 mA max. (in terms of DC power inputs of RM-300MF)
Under 1%
200 – 15,000 Hz
Over 55 dB
0 dBV, 600 Ohm, balanced
Unidirectional dynamic microphone
Microphone, buzzer
Emergency button, Evacuate button, Alert button, Emergency reset key, CPU switch, Reset switch
20 keys extension per RM-320F, extension connector 20
Shielded CPEF cable or Category 5 STP cable,
Connection to RM-200M, RM-200X or RM-200XF by
M3 screw terminal
way of dedicated cable
ABS resin, bluish gray
ABS resin, bluish grey (PANTONE 538 or its equivalent)
200 × 215 × 82.5 mm
110 x 76.5 x 215 mm
1.1 kg
350 g
Finish
Dimensions (W x H x D)
Weight
09
Function keys
RM-320F
Elegent design
Zone, group and all-call paging, and starting
pre-recorded messages
Indication of sytem failure, line failure, busy
zones etc.
Extraordinary clarity and freedom from
distortion by built-in compression circuit
Up to 4 remote microphones can be
connnected to the VM-3000 system amplifier
Up to 800 m total cable length
RM-210: Allows announcements in
up to 60 zones
Colour: Bluish grey
Options
WH-4000A: Headset
WB-RM200: Wall-mounting bracket
Specifications
RM-200M
RM-210
Power Requirement
Current Consumption
24 V DC (Operating range: 14 – 28 V DC)
100 mA maximum
Distortion
Frequency Response
Signal-to-Noise Ratio
Audio Output
Microphone
Speaker Control
Under 1%
100 – 20000 Hz
Over 60 dB
0 dBV, 600 Ohm, balanced
Unidirectional electret condenser microphone
Controllable by PC software
From RM-200X/M/XF
20 mA max. (in terms of DC power inputs of
RM-200X and RM-200XF)
-
Voice Message Control
Key Extension
Connection Cable and Connector
Activation of 5 messages
10 keys extension per RM-210, extension connector
Category 5 STP cable, RJ45 connector
Finish
Dimensions (W x H x D)
Weight
10
Connection to RM-200M, RM-200X or RM-200XF by
way of dedicated cable
ABS resin, bluish grey
ABS resin, bluish grey (PANTONE 538 or its equivalent)
190 × 76.5 × 215 mm (Gooseneck microphone excluded) 110 x 76.5 x 215 mm
750 g
350 g
10
VX-2000 Series
Audio Management System
VX-2000 - Description
The VX-2000 Series is a versatile broadcast and public address system that fulfills the requirements of
EN60849/IEC60849 standard for general purpose and emergency broadcasts.
It is configured for simple as well as for complex installations.
The total system is composed of a System Manager, Surveillance Frame, Power Amplifiers, Power
Supply, Emergency Power Supply, Fireman‘s Microphone and user-specified number of Remote
Microphones.
The most important factor in an emergency system is
total reliability.
The VX-2000 features include multiple failure detection
measures that constantly check components and
speaker lines for any faults or abnormalities which are
informed via indicators and buzzers.
The VX-2000 features a scalable architecture that can
be easily expanded as requirements dictate.
Its fully modular configuration facilitates assembling a
system that is ideally optimized for a particular application with specific modules.
The VX-2000 offers a high-performance cost-effective
solution to any environment‘s broadcast and public
address requirements.
Features
Full compliance with EN60849
standards
System status can be confirmed on
Remote Microphones
Emergency Microphone is available
Simultaneous dual-origin recorded
message broadcasts
Convenient multi-language software
1 per 100 second frequency program
non-interruptive surveillance
Applications
Public buildings for example schools,
train stations, shopping malls or administrative
buildings which need to fulfill the demanding
requirements of emergency evacuation
according to EN 60849 as well as standard PA
requirements
Options
EV-200M: Voice announcement board
IT-450: Isolation transformer (audio link output)
EN54
16
11
12
VX-2000 Series
System Manager
VX-2000 Series
Surveillance Frame
EN54
4
First fully EN 54 Certified Voice Alarm System
Features
Input matrix unit that assigns input signals to 4
audio buses
Functions as the VX-2000 system‘s manager
Up to 8 units of the VX-200XI, VX-200XR, and
900 Series input modules can be mounted in
the System Manager
The VX-2000 can control audio signal routing,
priorities, and peripheral equipment
Input and output control settings are performed
by way of a PC software
Up to 2000 system events and failures can also
be recorded, and the log can be viewed from
a PC
Options
VX-200XR: Remote Mic Input Module
VX-200XI: Audio / Control Input Module
900 series plug-in modules:
(M-01F, U-01F, U-01R, U-03R)
Specifications VX-2000
Power Source
Current consumption
Input
Audio Link Output
Monitor Output
Frequency Response
S/N Ratio
Distortion
Cross Talk
Control Input
Control Output
Chime Tone
Communication System
Operating Temperature
Finish
Dimensions (W x H x D)
Weight
13
24 V DC (operating range: 20 – 40V DC)
Under 650 mA (20 V DC)
–20 dBV, unbalanced, number of module slots: 8
Number of audio buses: 4, 0 dBV, electronically balanced, RJ45 female connector
0 dBV, electronically balanced, XLR receptacle (3 pins)
20 – 20000 Hz
Over 60 dB
Under 0.5 %
Under –60 dB (1 kHz, 0 dB)
16 inputs, RJ45 connector x 2
16 outputs, RJ45 connector x 2
Built-in chime: 4-tone chime (up)/4-tone chime (down)/2-tone chime/Gong
PC (setting software to be installed): D-sub connector (9 pins), cross cable, RS-232C,
VX-2000SF: RJ45 connector, twisted-pair straight cable (TIA/EIA-568A standard), LONWORKS RS-485
0° C to +40° C
Panel: Surface-treated steel plate, black, 30 % gloss, paint
482 x 132.6 x 337 mm
6.4 kg
Features
Surveillance Frame is the output matrix section
of the VX-2000 system
A total of 10 units of output modules and control
modules can be installed
Assigns audio signals to individual zones
from 4 audio buses
Extendable to up to 5 units
Rack-mountable, 3 units height
1 standby amplifier per VX-2000SF
In case of power amplifier failure, output is
automatically switched to the standby amplifier
Output volume setting with PC system software
6 types of modules can be used:
The VX-200SP/200SP-2 Pilot Tone Detection
module, the VX-200SZ/200SZ-2 Impedance
Detection module, the VX-200SI Control Input
module, and the VX-200SO Control Output
module
Options
Pilot Tone Detection Modules: VX-200SP-2,
VX-200SP
Impedance Detection Modules: VX-200SZ,
VX-200SZ-2
VX-200SI: Control Input Module
VX-200SO: Control Output Module
Specifications VX-2000SF
Power Source
Current Consumption
Number of Module Slot
Frequency Response
S/N Ratio
Distortion
Cross Talk
Audio Link Input/Output
Standby Amplifier Link
Communication System
Operating Temperature
Finish
Dimensions (W x H x D)
Weight
Accessory
24 V DC (operating range: 20 – 40V DC)
Under 2 A (40V DC)
10, usable modules: VX-200SZ, VX-200SZ-2, VX-200SP, VX-200SP-2, VX-200SI, VX-200SO
20 Hz -20000 kHz (when use VX-200SZ: 120 Hz ... 20 kHz)
Over 60 dB
Under 0.5 %
Under -60 dB (1 kHz, 0 dBV)
Number of audio buses: 4, 0 dBV, electronically balanced, RJ45 connector
RJ45 female connector for connecting the VP-2064, VP-2122, VP-2241, VP-2421 Power Amplifier.
VX-2000, VX-2000SF: RJ45 female connector x 2, LONWORKS RS-485 VX-2000DS: RJ45 connector x 2
0° C to +40° C
Panel: Surface-treated steel plate, black, 30% gloss, paint
482 x 132.6 x 337 mm
5.6 kg
Pre-installed rack mounting bracket (pre-installed on the unit), blank panel x 9, standby amp. cable (3m) x 1
14
VX-2000 Series
Power Supply
VX-2000 Series
Emergency & Standard Power Supply
EN54
4
First fully EN 54 Certified Voice Alarm System
VX-2000PS
Features VX-2000PF
Features VX-2000PS
Up to 3 VX-200PS Power Supply units (6 channls) can be mounted in one VX-2000PF Power
Supply Frame
2 DC output channels per unit
EN 54-4 Certified
Certificate No : 1134-CPD-083
Features
VX-2000PF
VX-2000PF frame for rack mounting of up to
3 VX-200PS Power Supply Units
EN54-4 Certified
Certificate No: 1134-CPD-083
Dimensions
The VX-2000DS Emergency Power Supply Unit
supplies the DC power to each component in the
VX-2000 system by connecting the VX-2000PS
Power Supply Unit. It keeps the battery unit that
contains 2 × 12 V sealed lead batteries charged
compensating for the temperature of the battery
charging voltage.
Automatically switch-over in case of AC mains
failure
EN 54-4 certified
Certificate No : 1134-CPD-083
Dimensions
Specifications VX-2000DS
Power Source
Power Consumption
Applicable Battery
Charging Method
Charging Current
Charging Output Voltage
Power Supply Input
DC Power Output
Control Connector
Type of control signal:
Battery Connection
Operating Temperature
Finish
Dimensions (W x H x D)
Weight
15
230 V AC, 50/60 Hz
240 W max.
Panasonic LC-X1265PG / APG (65 Ah) (12V x 2 or 4)
Trickle charging
5 A max
27.3 V ±0.3 V (at 25°C) Temperature correction coefficient: –40 mV/°C
6 M4 screw terminal, distance between barriers: 11 mm
6 (25 A max. each) M4 screw terminal, distance between barriers: 11 mm
RJ45 female connector for connecting the VX-2000SF. Twisted-pair straight cable (TIA/EIA-568A standard)
Battery check, AC power status, DC power status, charging circuit failure, and battery failure
1 pair of positive and negative terminals, applicable cable diameter: AWG 6 – AWG 1/0
0°C to +40°C
Panel: Surface-treated steel plate, black, 30% gloss, paint
482 x 88.4 x 377.6 mm
10.5 kg
Specifications
Power
Source
Power Consumption
PS OUT
Operating Temperature
Finish
Dimensions (W x H x D)
Weight
Product Composition
Accessory
Usable Unit
-VX-2000PS
Panel: Surface-treated steel plate, black,
30 % gloss, paint
483 x 132.6 x 324.8 mm
5.5 kg
Side panel x 2, Chassis x 1, Front panel x 1
Rack mounting screw x 4, Fiber washer x 4
VX-200PS (up to 3)
230 V AC, 50/60 Hz
580
W
VX-2000PF
Rated output: 210 W (29 V, 7.25 A) x 2,
Peak output: 400 W x 2, M4 screw terminal
0° to +40°C
Surface-treated steel plate
135 x 118.2 x 333.8 mm
13.2 kg
Fuse (T3.15A L) x 1, Power cable x 1
-
16
VX-2000 Series
System Amplifier
VX-2000 Series
System Amplifier - Specification
Specifications
Type
Power Source
Current Consumption (EN60065)
Rated Output Power
Output Voltage/Impedance
Number of Channels
Input
Number of Module Slots
Output
Frequency Response
Distortion
S/N Ratio
Panel Indicator
Operating Temperature
Finish
VP-2000VX
Dimensions (W x H x D)
Weight
Accessory
Specifications
Type
Power Source
VP-2000VX-BGM
VP-2064/VP-2122/VP-2241/VP-2421
Current Consumption (EN60065)
Rated Output Power
Output Voltage/Impedance
Number of Channels
Input
Number of Module Slots
Output
Features
4 different power configurations:
60 W x 4 Channels (VP-2064)
120 W x 2 Channels (VP-2122)
240 W x 1 Channel (VP-2241)
420 W x 1 Channel (VP-2421)
Usable as standby amplifier for
emergency switchover
Power Amplifier uses 1 VP-200VX Power
Amplifier Input Module per channel
Programmable power amplifier standby function
maximizes battery-powered operation time
Options
VP-200VX: Amplifier Input Module for
transmission of status and audio signals
between amplifier and control modules
Frequency Response
Distortion
S/N Ratio
Panel Indicator
Operating Temperature
Finish
Dimensions (W x H x D)
Weight
Accessory
VP-2064
Power Amplifier 4 x 60 W
28 V DC (operating range: 20 .... 40 V DC) M4 screw
terminal, distance between barriers: 12 mm
4.8 A in total
4 x 60 W
100 V/167 Ohm, 70 V/83 Ohm, 50 V/41 Ohm
(selectable by the internal wiring change)
4
Specified by input module VP-200VX
1, usable module: VP-200VX
Power amplifier output (speaker line):
M3.5 screw terminal
40 .... 16,000 Hz, ±3 dB (at 1/3 rated output)
Under 1% (at rated output, 1kHz)
Over 80 dB
Channel power indicator: 4 channels, dual colour LED
Overheat indicator: Yellow LED
0° ... +40°C
Panel: Surface-treated steel plate, black,
30% gloss, paint
482 x 88.4 x 340.5 mm
11.2 kg
Rack mounting screw x 4, Fiber washer x 4
VP-2241
Power Amplifier 120 W
28 V DC (operating range: 20 .... 40 V DC) M4 screw
terminal, distance between barriers: 12 mm
4.8 A
1 x 240 W
100 V/41 Ohm, 70 V/21 Ohm, 50 V/10 Ohm
(selectable by the internal wiring change)
1, usable module: VP-200VX
Specified by input module VP-200VX
4, usable module: VP-200VX
Power amplifier output (speaker line):
M3.5 screw terminal
40 .... 16,000 Hz, ±3 dB (at 1/3 rated output)
Under 1% (at rated output, 1kHz)
Over 80 dB
Channel power indicator: 4 channels, dual colour LED
Overheat indicator: Yellow LED
0° ... +40°C
Panel: Surface-treated steel plate, black,
30% gloss, paint
482 x 88.4 x 340.5 mm
8.1 kg
Rack mounting screw x 4, Fiber washer x 4
VP-2122
Power Amplifier 2 x 120 W
28 V DC (operating range: 20 .... 40 V DC) M4 screw
terminal, distance between barriers: 12 mm
4.8 A in total
4 x 120 W
100 V/83 Ohm, 70 V/41 Ohm, 50 V/21 Ohm
(selectable by the internal wiring change)
2
Specified by input module VP-200VX
1, usable module: VP-200VX
Power amplifier output (speaker line):
M3.5 screw terminal
40 .... 16,000 Hz, ±3 dB (at 1/3 rated output)
Under 1% (at rated output, 1kHz)
Over 80 dB
Channel power indicator: 4 channels, dual colour LED
Overheat indicator: Yellow LED
0° ... +40°C
Panel: Surface-treated steel plate, black,
30% gloss, paint
482 x 88.4 x 340.5 mm
9.1 kg
Rack mounting screw x 4, Fiber washer x 4
VP-2421
Power Amplifier 420 W
28 V DC (operating range: 20 .... 40 V DC) M4 screw
terminal, distance between barriers: 12 mm
7.6 A
1 x 420 W
100 V/24 Ohm, 70 V/12 Ohm, 50 V/6 Ohm
(selectable by the internal wiring change)
1, usable module: VP-200VX
Specified by input module VP-200VX
2, usable module: VP-200VX
Power amplifier output (speaker line):
M3.5 screw terminal
40 .... 16,000 Hz, ±3 dB (at 1/3 rated output)
Under 1% (at rated output, 1kHz)
Over 80 dB
Channel power indicator: 4 channels, dual colour LED
Overheat indicator: Yellow LED
0° ... +40°C
Panel: Surface-treated steel plate, black,
30% gloss, paint
482 x 88.4 x 340.5 mm
9.5 kg
Rack mounting screw x 4, Fiber washer x 4
VP-200VX-BGM: Amplifier Input Module with
additional input for BGM
17
18
VX-2000 Series
Emergency Remote Microphone
VX-2000 Series
Remote Microphone
Alarm Switch
RM-200X
RM-200X
RM-210
WRM-200
Features
RM-200XF
RM-210
Microphone
Features
Special microphone for fireman‘s use
For emergency broadcast and general purpose
broadcast applications
Push-button zone selection
PC-programmable system software allows
assigning of functions to the individual keys
(each with 2 LED)
Per 1 RM-200XF up to 10 extensions of RM-210
Up to 4 Emergency microphones per 1 system
CPU-switch for emergency broadcast to all
zones even in case of a CPU error
19
Automatic failure detection of emergency keys
and in the signal path (control and audio
signals) between microphone (including
microphone element) and system manager
Options
RM-210: Extension Unit
WB-RM200: Wall-mounting bracket for
Specifications
RM-200XF
Power Source
Current Consumption
Audio Output
Hand-Held Microphone
Frequency Response
S/N Ratio
Functions
Number of Function Keys
Key Extension
Number of Connectable Units
Communication System
Connection Cable and Connector
Communication Distance
Finish
Dimensions (W x H x D)
Weight
24 V DC (operating range: 16 – 40 V DC)
Under 200 mA (RM-200XF), 850 mA (with 10 RM-210s connected)
0 dBV, 600 Ohm, balanced
Dynamic microphone, function switch (default: press-to-talk), microphone element fault detection
200 – 15,000 Hz
Over 55 dB
Internal monitor speaker 200 mW/Volume control: microphone, monitor speaker
5 (including hand-held microphone‘s switch), extendable up to 105 (with 10 RM-210s connected)
10 keys extension per RM-210, EXTENSION connector
4
LONWORKS twisted pair free topology transceiver
Category 5 STP cable, plug-in screw connector
500 m (Free topology wiring)
ABS resin, bluish grey (PANTONE 538 or equivalent)
200 x 215 x 82.5 mm (excluding the coiled cord)
1.2 kg
RM-200X: System remote microphone
For both emergency and general purpose
broadcast
Zone selection or all call
PC-programmable system software permits
desired functions to be assigned to individual
function keys (equipped with 2 LED indicators)
Up to 9 RM-210 Remote Microphone Extension
units can be used with each RM-200X Remote
Microphone
Up to 8 in total of RM-200X and RM-200XF
units can be connected within one system
RM-210: Key extension unit
10 additional keys
Options
WB-RM200: Wall mounting bracket for
WH-4000A: Headset
Specifications
RM-200X
RM-210
Power Source
From RM-200X/M/XF
Connection Cable and Connector
24 V DC (operating range: 16 – 40 V DC), supplied
from RJ45 connector or power input jack
(non-polarity type)
Under 200 mA (RM-200X), 750 mA
(with 9 RM-210s connected)
0 dBV, 600 Ohm, balanced, RJ45 connector
-40 dB, 2.2 kΩ, unbalanced, mini jack, phantom powering
Under 1 %
100 Hz ... 20 kHz
Over 60 dB
200 mW
Microphone volume control,
Monitor speaker volume control
15, extendable up to 105
(with 9 RM-210s connected, 10 keys each)
8 (including RM-200XF)
System: LONWORKS twisted pair free topology
transceiver, Distance: max. 500 m (Free topology wiring)
Category 5 STP cable, RJ45 connector
Finish
Dimensions (W x H x D)
Weight
ABS resin, bluish grey (PANTONE 538 or its equivalent)
190 x 76.5 x 215 mm (gooseneck microphone excluded)
850 g
Current Consumption
Audio Output
External Microphone Input
Distortion
Frequency Response
S/N Ratio
Internal Monitor Speaker
Volume Control
Number of Function Keys
Number of Connectable Units
Communication
20 mA max. (in terms of DC power inputs of
RM200X and RM-200XF)
10
Connection to RM-200M, RM-200X or RM-200XF by
way of dedicated cable
ABS resin, bluish grey (PANTONE 538 or its equivalent)
110 x 76.5 x 215 mm
350 g
20
VX-2000 Series
System Configuration
VX-2000 Series
Modules
VX-200XI (For VX-2000)
VX-200XR (For VX-2000)
External Equipment
Audio Input Module with
Control Input
Control input terminals
Low-cut and high-cut filters
Gain controls
Connects e.g. to paging
microphone or other sound
source equipment with both
audio and control outputs
Audio input sensitivity –70
dB or –20 dB by internal switch
For input module slot of the
VX-2000 frame
*A maximum of 4 broadcasts are simultaneously possible.
(2 EV-200M voice announcement boards installed in the
VX-2000)
Red
In an emergency, the system automatically broadcasts one
evacuation message to the buildings 3rd and 4th floors.
Blue
Along with the evacuation message, the system automatically
broadcasts an alert message to the 1st and 2nd floors
simultaneously.
21
Paging Station Connection
VX-200XI
VX-200XR
Power Source
Current Consumption
Connectable Microphones
Input Sensitivity
Supplied from VX-2000
Under 30 mA
–
MIC: –70 to –42.5 dBV
LINE: –20 to +7.5 dBV
MIC or LINE with selector switch
Supplied from VX-2000
Under 17 mA
RM-200X and RM-200XF
–
Speaker Output
Impedance Detection
Module is an audio signal
output module
Speaker line impedance
detection
For VX-2000SF Surveillance
Frame
Detection of speaker line
short circuits, open circuits
by comparing impedance
values, and ground fault
VX-200SZ
Supplied from VX-2000SF
Under 150 mA
VX-200SZ-2 (s. next page)
Supplied from VX-2000SF
Under 170 mA
Plug-in screw connector
2 outputs (A, B),
plug-in screw connector
Plug-in screw connector for connecting the VP-2064, VP2122, VP-2241, VP-2421 power amplifier
Short circuit, open circuit (impedance detection method),
ground fault
Power Amplifier Input
Fault Detection System
Finish
Dimensions (W x H x D)
Weight
Applicable Model
Features
Remote Microphone Input
Module for RM-200X Remote
Microphone or RM-200XF
Fireman‘s Microphone
For VX-2000 frame‘s input
module slot
Specifications
Control Input
Impedance Monitoring
Features
Features
Automatic Dual Broadcasting
When activated by a remote microphone or fire detection system link, simultaneous dual broadcasting
is possible by using 2 voice announcement cards to allow different messages* to be available at the
same time such as alert and evacuation messages.
VX-200SZ (For VX-2000)
No-voltage make contact,
open voltage: 17 V DC,
short circuit current: Under 5 mA
Panel: Aluminium, hairline
35 x 78 x 88 mm
70 g
VX-2000
–
Panel: Aluminium, hairline
35 x 78 x 88 mm
70 g
VX-2000
Panel: Surface-treated steel plate
30.5 x 132.6 x 290.3 mm
320 g
335 g
VX-2000SF
VX-2000SF
22
VX-2000 Series
Modules
VX-200SZ-2 (For VX-2000SF)
Duel Curcuit Impedance Monitoring
Impedance Detection
Module
Similar to the VX-200SZ‘s
features
2 speaker outputs (A and B),
broadcasts can be
maintained even if 1 of the 2
outputs fails
Failures indication by LED
on the panel
VX-200SP-2 (For VX-2000SF)
Return Loop Monitoring
Pilot Tone Detection Module
Audio signal output module
with speaker line pilot tone
detection
Detection of speaker line
short circuits, open circuits
by monitoring for the
presence of a pilot signal,
and ground fault
Consists of Pilot Tone
Detection Module + End of
Line Module
Similar to the VX-200SP’s
features
Connected to the end of the
speaker line
Eliminates the necessity of
using the speaker line for
line monitoring
Shielded cable must be used
for the speaker line
Power Source
Current Consumption
Power Amplifier Link
Line Monitor
External Attenuator
Supplied from VX-2000SF
Supplied from VX-2000SF
Under 100 mA
Under 100 mA
RJ45 female connector for connecting the VP-2064, VP-2122, VP-2241,VP-2421Power Amplifier.
Plug-in screw connector
Plug-in screw connector
Plug-in screw connector, relay, no-voltage make
Plug-in screw connector, relay, no-voltage make contact
contact output
output
Transfer type, withstand voltage: 30 V DC, 250 V AC,
Transfer type, withstand voltage: 30 V DC, 250 V AC,
contact current: Under 7A
contact current: Under 7A
Plug-in screw connector
Plug-in screw connector
Plug-in screw connector for connecting the VP-2064, VP-2122, VP-2241, VP-2421 Power Amplifier
Short circuit, open circuit (pilot tone detection method),
Short circuit, open circuit (pilot tone detection method),
ground fault
ground fault
Panel: Surface-treated steel plate
Panel: Surface-treated steel plate
30.5 x 132.6 x 290.3 mm
30.5 x 132.6 x 290.3 mm
240 g
235 g
VX-2000SF
VX-2000SF
Power supplied from the VX-200SP-2, speaker line
connection: Plug-in connector, weight: 22 g
Finish
Dimensions (W x H x D)
Weight
Applicable Model
End Of Line Unit
(Accessory)
VX-200SI (For VX-2000SF)
VX-200SE (For VX-2000SF)
Features
VX-200SP
Speaker Output
Power Amplifier Input
Fault Detection System
VX-200SO (For VX-2000SF)
End of Line Monitoring
Specifications
Control Output
23
VX-200SP (For VX-2000SF)
Features
Features
VX-2000 Series
Modules
VX-200SP-2
Features
Control Output Module
Increases the number of
control outputs in the
VX-2000 system
16 control outputs
No-voltage ‚make‘ contacts
can be output to external
equipment depending on
the internal event
Up to 128 control outputs
per system
Features
Features
Control Input Module
• Increases the number of
control inputs
• 16 control inputs
• Receives a contact signal
from connected external
equipment and controls the
system
• Up to 128 control inputs per
system
• Equalizer Card
• 9-band, 1-channel equalizer
• To be mounted on the
circuit board of the
VX-200SP Pilot Tone
Detection module
VX-200SP-2 Pilot Tone
Detection module
VX-200SZ Impedance
Detection module
VX-200SZ-2 Impedance
Detection module
• Settings are performed by
using the PC system
software
Specifications
VX-200SO
VX-200SI
VX-200SE
Power Source
Current Consumption
Equalizer Centre Frequency
Supplied from VX-2000SF
Under 150 mA
–
Supplied from VX-2000SF
Under 100 mA
–
Gain Range
Control Output
–
16 outputs, no-voltage make contact
contact capacity: 28 V DC, 1A,
RJ45 connector
Panel: Surface-treated steel plate
30.5 x 132.6 x 290.3 mm
250 g
VX-2000SF
Supplied from VX-200SZ, VX-200SP
Under 50 mA
80 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz,
2 kHz, 4 kHz, 8 kHz, 12 kHz
±12 dB, adjustable in 2 dB steps
–
16 inputs, no-voltage make contact,
open voltage:24 V DC, short circuit
current: under 10mA, RJ45 connector,
Panel: Surface-treated steel plate
30.5 x 132.6 x 290.3 mm
110 x 90 x 21.4 mm
200 g
50 g
VX-2000SF
VX-200SZ, VX-200SP
Finish
Dimensions (W x H x D)
Weight
Applicable Model
24
VX-2000 Series
Modules
VP-200VX (For VP-2000 Amps)/VP-200VX-
VX-2000 Series
Modules
EV-200M (For VX-2000)
M-01
U-03R
Features
Power Amplifier Input Module
For transmission of status and audio signal
between amplifier and control module
To be built into the VP-2064, VP-2122,
VP-2241 or VP-2421 power amplifier
VP-200VX-BGM features additional BGM
input plus muting
Sound Repeater Module
Up to 7 messages, 5 general
messages/music, 1 alert and 1 evacuation
(in compressed format it will allow 20 min
utes) plus of message duration and can be
recorded and played back
Includes compact memory flash card
Specifications
VP-200VX (For VP-200 Amps)
EV-200M (For VX-2000)
Power Source
Power Consumption
Output
Frequency Response
Power Amplifier Link
Supplied from VP-2064, VP-2122, VP-2241 or VP-2421
Under 30 mA
24 V DC, 0.2 A
5W
0 dBV
20 Hz ... 20 kHz (44.1 kHz sampling)
RJ45 connector for connecting the VX-200SP or
VX-200SZ audio output module
Distortion
Playback Mode
No. of Playback Program
Operating Temperature
Finish
Dimensions (W x H x D)
Weight
25
Features
Under 0.3% (44.1 kHz, recording method:
Extremely high)
Single source playback
8 programs
0°C to +50°C
Panel: Surface-treated steel plate
88 x 25.8 x 73.2 mm
50 g
120 x 18.6 x 121 mm
110 g
Features
Features
U-03R Module Input (RCA connector)
U-01F Module Aux input (XLR connector)
U-01S Module Input (Phoenix connector
Microphone input module
Phantom power
Balanced, low impedance
Filter: High pass, low pass
Connector:M-01F : XLR
Specifications
M-01
U-03R
Input Impedance
Current Consumption
Sensitivity
Frequency range
Finish
Dimensions (W x H x D)
Weight
Applicable Model
200 Ohm, balanced
9 mA
-60 dBv
25 Hz ... 20 kHz
Front: Steel plate
35 x 78 x 88 mm
110 g
VX-2000
Under 8 mA
100 - 3,600 mV (adjustable)
20 Hz - 20 kHz
Front: Steel plate
35 × 78 × 88 mm
50g
VX-2000
26
SX-2000 Series
Network Enabled for Extended System Installations
SX-2000 - Description
The SX-2000 is a new scalable system for configuring versatile and highly effective PA systems. The
system features new matrixing capabilities, so that a single system can have its components distributed
in different locations under centralized control. Ideal for large scale installations ranging from multiple
buildings to local systems, the versatile SX-2000 Series is particularly suitable for using in airports and
railway stations, factories, shopping malls and large offices. The system‘s versatility such as dual power
source and redundancy for fail-safe operation makes it a reliable solution for any specific installation
without long lead times and the expense of custom systems.
SX-2000 System Configuration
The basic system comprises one SX-2100AI Audio Input Unit, one SX-2000AO or SX-2100 Audio Output
Unit and the SX-2000SM System Manager. It enables from 2 inputs/8 outputs right up to 64 inputs and
256 outputs, with further expansion to 1,416 control inputs/outputs if needed. The SX-2000 Series makes
it simple to control an expanded system by use of networking with commercial switching hub and cables,
IP Intercom Network audio adaptor(s) can also be used. It features functions such as feedback
suppressor, compressor/ auto-leveler, equalizer/filters, and auto mixing (with feedback ducker) to ensure
high sound quality. The SX-2100AI modular construction simplifies system configuration as only plug-in
modules have to be used. Therefore it allows flexibility of use with a wide range of input devices such
as CD player, FM etc. to suit a particular application.
Fail-Safe Operation
The system is featuring a self-diagnosis to continuously monitor the status as well as speaker lines and
connections. It generates alerts and email notifications to the system administrator along with a failure
log. Power failure protection is given by two power supply
channels plus a battery back-up keeps the system operational
without requiring an UPS. An additional analog backup line
from the microphone to the amplifier allows simultaneous
broadcasting even during a breakdown of the system‘s digital
functions. The SX-2000 system can be password-protected
and key locked at external devices.
Operational Simplicity and Low Maintenance
Control over the entire system is software-driven. Operation
tasks are performed easily through menu and function buttons
assisted by an LCD and status LEDs. Operation and
maintenance tasks are easier compared to conventional
systems with parameter settings saved to a compact flash card.
EN54
16
27
28
SX-2000 Series
System Management
Features
Matrix system in combination with an audio
input unit, audio output unit, and remote
microphone
Audio signal routing and priority control
8 control inputs, 8 control outputs
Failure status outputs, failure data inputs/switches
Access indicators, mode indicators and failure
indicators enabling a wide range of controls
and status monitoring
Control can be performed by way of a CF card
inserted into the SX-2000SM unit
Operations can be recorded and their contents
stored on a CF card as an operation log
Two power inputs for creation of a
dual-redundant power system
SX-2000 Series
Audio Input Unit
Automatic voice announcement for emergency
purpose available
System settings via Dual LAN connection
Options
SX-2000AO Audio Output Unit
SX-2100AI Audio Input Unit
SX-2100AO Audio Output Unit
Volume controls can be locked using the
SX-2000 software
Input channels can be monitored using the
internal speaker
2 power inputs for redundant power system to
support a dual-redundant power supply system
Features
Modular audio input
2 to 8 inputs per unit
Multiple units can be decentralized in a whole
system
Audio signals are transmitted digitally to the
audio output unit
Analog audio output function (1 channel)
enables simultaneous all-zone calls for use in
emergency situations
Audio input levels (post-fader levels) are
indicated on the level meters provided for each
input channel
Options
Specifications SX-2000SM
Power Source
Current Consumption
SX Link Network I/F
Matrix System Specification
Matrix System Configuration
LAN
Analog Link
Failure Data
Memory Card
Control
Finish
Dimensions (W x H x D)
Weight
29
24 V DC; 2 power inputs
Under 0.8 A
2 100BASE-TX circuits
Bus: 16; audio input: Max. 64 ch, audio output: Max. 256 zones.
Contact input: Max. 1,416, contact output: Max. 1,416.
Priority control: 256 steps. Event log: Max. 10,000 events
Connectable SX-2100AI No.: Max. 8 units. Connectable SX-2100AO No.: Max. 32 units.
Connectable RM-200S No.: Max. 64 units (up to 4 RM-200S per SX-2000AI)
Connection cable / device shielded category 5 twisted pair cable for LAN (CAT5-STP)
Network I/F 1 10 BASE-T/100 BASE-TX circuit. Network Protocol TCP/IP. Connection Cable Shielded
Category 5 twisted pair cable for LAN (CAT5-STP)
Input/output connector output: 2.
Connection cable shielded category 5 twisted pair cable for LAN (CAT5-STP)
3 inputs (ACK/RESET/LAMP TEST) and 4 outputs (CPU FAULT/GENERAL FAULT/CPU OFF/BUZZER)
Insertion slot: 1 (supplied CF card (128MB))
8 Control outputs, 8 control inputs
Panel: Aluminium, black, alumite, case: Surface-treated steel plate
482 x 44 x 333 mm
3.8 kg
Volumes can be adjusted for each channel
using the volume controls on the front panel or
the SX-2000 software
SX-200RM: Remote Microphone Interface Module
RM-200SF: Remote Microphone
RM-200SA: Remote Microphone
RM-210: Extension Unit
D-921E: Mic/Line Input Module
D-921F: Mic/Line Input Module
D-922E: Mic/Line Input Module
D-922F: Mic/Line Input Module
D-936R: Stereo Select Input Module
Specifications VX-2100AI
Power Source
Current Consumption
Audio Intput
Audio Input Characteristics
Analog Link
Input / Output Connector
Connection Cable / Device
SX Link Network I/F
Connection Cable / Device
Operating Temperature
Finish
Dimensions (W x H x D)
Weight
24 V DC (2 independant power inputs)
Under 1.5 A
8 inputs, for up to 4 modules
Sampling frequency: 48 kHz
1 input, 1 output,
CAT5-STP, max. cable length 800m, 2 x RJ45 connector
2 x 100 Base TX
CAT5-STP, maximum cable length 100m to hub
0° C to +40° C
Panel: Aluminium, black, alumite, case: Surface-treated steel plate
482 x 88.4 x 349 mm
7 kg
30
SX-2000 Series
System Remote Microphone and Modules for SX-2000AI for SX-2100AI
SX-2000 Series
System Remote Microphone and Modules for SX-2100AI
SX-2100AI (rear)
RM-200SA / RM-210
RM-200SA
Remote Microphone
The RM-200SA is a remote microphone designed for
TOA‘s Matrix System. It is equipped with: 13 function
switches (which can be programmed to select individual zones or zone groups), a covered switch, and
corresponding indicators.
31
RM-200SF
RM-210
Remote Microphone Extension
The RM-210 is an extension unit for increasing the
number of function keys of RM-200S,
Remote Microphones.
RM-200SF
RM-200SF is a Fireman's Microphone of the matrix
system. It is equipped with an Emergency key, permitting it to be used as a remote microphone for emergency broadcast.
SX-200RM
Remote Microphone Interface
Module
D-921E
Mic/Line Input Module
(24 bits monaural type)
D-921F
Mic/Line Input Module
(24 bits monaural type)
The SX-200RM is a dedicated
remote microphone module for
the SX-2000 Series audio input
unit and can be used to connect
two remote microphones. Input
sensitivity can be adjusted.
The D-921E is a dedicated
2-channel microphone/line input
module designed for use with the
SX-2100AI and equipped with
removable terminal block type
connectors.
The D-921F is a dedicated
2-channel microphone/line input
module designed for use with the
SX-2100AI and equipped with XLR
connectors.
D-922E
Mic/Line Input Module
(20 bits monaural type)
D-922F
Mic/Line Input Module
(20 bits monaural type)
D-936R
Stereo Select Input Module
The D-922E is a dedicated
2-channel microphone/line input
module designed for use with the
SX-2100AI and equipped with
removable terminal block type
connectors.
The D-922F is a dedicated
2-channel microphone/line input
module designed for use with the
SX-2100AI and equipped with XLR
connectors.
The D-936R is a dedicated 4
stereo input module designed for
use with the SX-2000AI and
equipped with standard RCA pin
jacks.
32
SX-2000 Series
Audio Output Unit SX-2000AO
SX-2000 Series
Audio Output Unit SX-2100AO
SX-2000AO
SX-2100AO
Features
Audio output unit
Units can be operated in a decentralized
system
8 audio outputs and 2 inputs, can be mixed
8 control inputs and 8 control outputs
Receives audio signals from the audio input
unit via digital transmission
Analog audio input function (1 channel)
enables simultaneous all-zone calls for use in
emergency situations
Audio output levels (post-fader levels)
indicated on the level meters separate for each
output channel
Volumes adjustable for each channel by front
volume controls or the SX-2000 software
The volume controls can be locked by
SX-2000 software
Any output channel can be monitored using
the internal speaker
Features
Emergency audio input and 24V emergecy
cut-off input
2 power inputs for dual-redundant power
supply system
Automatic control of stand-by amplifier
Options
DA-250DH Digital 2 Channel Amplifier
DA-250FH Digital 4 Channel Amplifier
DA-550FH Digital 4 Channel Amplifier
VX-2000DS: Emergency Power Supply
VX-200PS: Power Supply Unit
VX-2000PF: Power Supply Frame
Specifications SX-2000AO
Power Source
Current Consumption
Audio Output
Audio Output Characteristics
Control Input / Control Output
Emergency Line Input
Emergency-Cutoff 24 V Input
Analog Link
SX Link
Operating Temperature
Finish
Dimensions (W x H x D)
Weight
33
24 V DC (operating range: 20 – 40V DC from VX-200PS)
Under 0.79 A
8 outputs, 0 dB, load: 600 Ohm or more
Frequency Response: 20 Hz ... 20 kHz , sampling frequency 48 kHz, D/A converter 24 bit
8 inputs / 8 outputs, removable terminal blocks (6 pins)
Emergency signals switched and sent to input 1 (H,C,E) by relay, removable terminal blocks (3 pins)
1 input, input current < 5 mA, removable terminal block (2 pins)
1 input, 1 output, connection cable CAT5-STP, max. cable length 800m, 2 x RJ45 connector
2 x 100 Base TX with RJ 45 connector. Connection cable CAT5-STP, maximum cable length of 100m to hub
0° C to +40° C
Panel: Aluminium, black, alumite, case: Surface-treated steel plate
482 x 88.4 x 349 mm
6.2 kg
Multiple units can be decentralised in a system
8 audio outputs
8 control inputs and 8 control outputs
1 SX-2000CI Control Input Unit and 1
SX-2000CO Control Output Unit each can be
cascaded
2 local audio inputs with control inputs are
provided for the audio inputs
Emergency switchover to a standby amplifier
Analog transmission path (1 channel) enables
all-zone calls for use in emergency situations
2 channels of link connection terminals for
connecting to two VX-2000DS
2 inputs can be mixed and output.
2 power inputs for redundant power supply
Level meters for each output channel allow
monitoring of audio output levels
Output volumes adjustable on the front panel
Any output channel can be monitored using the
internal speaker
Key lock function
Options
VP-2064: 60 W by 4 channels amplifier
VP-2122: 120 W by 2 channels amplifier
VP-2241: 240 W by 1 channel amplifier
VP-2421: 420 W by 1 channel amplifier
VX-2000DS: Emergency Power Supply
VX-200PS: Power Supply Unit
VX-2000PF: Power Supply Frame
Specifications SX-2100AO
Power Source
Current Consumption
Audio Output
Audio Output Characteristics
CI/CO Link
Local Audio Input
DS Link
Analog Link
SX Link
Operating Temperature
Finish
Dimensions (W x H x D)
Weight
24 V DC (2 power inputs)
Under 1.2 A
8 outputs, 0 dB, load: 600 Ohm or more
Frequency Response: 20 Hz ... 20 kHz , sampling frequency 48 kHz, D/A converter 24 bit
SX-2000CI / SX-2000CO: 1 interface, connection cable CAT5-STP, RJ45 connector
2 audio inputs, 0 dB, 10 kOhm, electronically balanced, RJ45 connector
Frequency Response: 20 Hz ... 20 kHz , sampling frequency 48 kHz, D/A converter 24 bit 2 Control inputs
Connection cable CAT5-STP,
VX-2000DS: 2 interfaces, connection cable CAT5-STP, RJ45 connector
1 input, 1 output, connection cable CAT5-STP, RJ45 connector
2 x 100 Base TX with RJ 45 connector. Connection cable CAT5-STP
0° C to +40° C
Panel: Aluminium, black, alumite, case: Surface-treated steel plate
482 x 88.4 x 349 mm
7.1 kg
34
SX-2000 Series
Control Intput Unit SX-2000CI
SX-2000 Series
Control Output Unit SX-2000CO
SX-2000CO
SX-2000CI
Options
Features
Decentralised installation possible
32 control inputs
Control input line failure detection
Front panel LED for monitoring the line status
Supply of stabilized 24 V DC
2 independent power inputs
RJ45 connectors
SX-2100AO Audio Output Unit
SX-2000AO Audio Output Unit
Applications
Airports, Exhibiton Centres,
Event Centres, Hotels
Specifications SX-2000CI
Power Source
Current Consumption
Control Inputs
CI/CO Link
Maximum Cable Distance
Finish
Dimensions (W x H x D)
Weight
35
Features
Options
Decentralised installation possible
32 control outputs
Control input line failure detection
Front panel LED for monitoring the line status
Supply of stabilized 24 V DC
2 independent power inputs
RJ45 connectors
SX-2100AO Audio Output Unit
Applications
Airports, Exhibiton Centres,
Event Centres, Hotels
Specifications SX-2000CO
24 V DC, 2 independant Inputs
Under 0.55 A (when operated on 24 V DC)
32 inputs
Input: 1 input, output: 1 output, input/output connector : RJ45 connector
Connection cable: Shielded category 5 twisted pair cable (CAT5-STP)
800 m
Panel: Aluminium black, alumite, Case: Steel plate
482 x 44 x 331.5 mm
3.6 kg
Power Source
Current Consumption
Control Outputs
CI/CO Link
Maximum Cable Distance
Finish
Dimensions (W x H x D)
Weight
24 V DC, 2 independant Inputs
Under 0.29A (when operated on 24V DC)
32 outputs
Input: 1 input, output: 1 output, input/output connector : RJ45 connector
Connection cable: Shielded category 5 twisted pair cable (CAT5-STP)
800 m
Panel: Aluminium black, alumite, Case: Steel plate
482 x 44 x 331.5 mm
3.6 kg
36
SX-2000 Series
Remote Microphone Interface Module
SX-2000 Series
System Configuration
SX-200RM
Options
Features
Module for mounting in the SX-2100AI
2 inputs
RJ45 connectors
Input sensitivity separately adjustable
SX-2100 AI: Audio Input Unit
Specifications SX-200RM
Power Source
Input
A/D Converter
Frequency Response
Sampling Frequency
Dynamic Range
Total Harmonic Distorsion
Finish
Dimensions (W x H x D)
Weight
Applicable Model
37
Supplied from SX-2000AI
Monaural x 2,
-10 dB (0 dB=0.775V), 10 Ohm, RCA pin jack
24 bits
20 - 20 000 Hz, ± 1dB (+4 dB input, 0 dB=0.775V)
48 kHz
> 100 dB (IHF-A weighted)
< 0.05 % (+4 dB input, 0 dB=0.775V)
Panel: Pre-coated steel plate, black, 30% gloss
35 x 119.5 x 178.4 mm
180 g
SX-2100AI
38
VM-3000
Series
SX-2000 Series
Extension
Amplifier
Emergency
Remote
Microphone
SX-2000 Series
Remote Microphone
Alarm Switch
RM-200SA/RM-210
RM-210
WR-RM-200
Up to 64 remote microphones can be
connnected
Covered switch prevents against accidental use
RM-210: Allows extended zone selection
Colour: Bluish grey
Features
RM-200SF/RM-210
Microphone
RM-210
Features
Exclusively for emergency broadcasts made
by firemen to evacuate
For activation of emergency mode, start and
stop automatic broadcasts of emergency
announcements, reset emergency signals,
and live microphone announcements
CPU OFF switch allows all-zone calls
(simultaneous attenuator-free global calls).
No general broadcasts can be made.
RM-210: Key extension unit
10 additional keys
Specifications RM-200SF
Power Requirement
Current Consumption
Distortion
Frequency Response
Signal-to-Noise Ratio
Audio Output
Microphone
Volume Control
Operation key
Key Extension
Connection Cable
Finish
Dimensions (W x H x D)
Weight
39
24 V DC (Operating range: 14 – 28 V DC)
100 mA (up to 550 mA with 3x RM-320F)
Under 1%
200 – 15,000 Hz
Over 55 dB
0 dBV, 600 Ohm, balanced
Unidirectional dynamic microphone AGC
Microphone, buzzer
Emergency key, Evacuate key, Alert key, Emergency reset key, CPU switch, Reset switch
10 keys extension per RM-210, extension connector
Shielded CPEF cable or Category 5 STP cable, M3 screw terminal
ABS resin, bluish gray
200 × 215 × 95 mm
1.48 kg
Elegant design
13 function switches
Zone, group, all-call paging, and starting
pre-recorded messages
Emergency sequence can be started with the
alarm button which is covered by a hinged lid
Indication of system failure, line failure,
busy zones etc.
Extraordinary clarity and freedom from
distortion by built-in compression circuit
Options
WH-4000A: Headset
WB-RM200: Wall mounting bracket
Specifications
RM-200SA
RM-210
Power Requirement
Current Consumption
24 V DC (Operating range: 15 – 40 V DC)
290 mA maximum
Distortion
Frequency Response
Signal-to-Noise Ratio
Audio Output
Microphone
Volume Control
Emergency Broadcast
Under 1%
100 – 20,000 Hz
Over 60 dB
0 dBV, 600 Ohm, balanced
Uni directional electret condenser microphone
Microphone, buzzer, monitor speaker
Activation of emergency broadcast (pre-recorded
announcement or live microphone announcement)
by emergency broadcast switch
Activation of 5 messages
10 keys extension per RM-210, extension connector
Category 5 STP cable, RJ45 connector
From RM-200X/M/XF
20 mA max. (in terms of DC power inputs of
RM-200X and RM-200XF)
-
Voice Message Control
Key Extension
Connection Cable and Connector
Finish
Dimensions (W x H x D)
Weight
10
Connection to RM-200M, RM-200X or RM-200XF by
way of dedicated cable
ABS resin, bluish grey
ABS resin, bluish grey (PANTONE 538 or its
equivalent)
190 × 76.5 × 215 mm (Gooseneck microphone excluded) 110 x 76.5 x 215 mm
880 g
350 g
40
Wall Mounted Ceiling Speakers BS-680F/680FC
Metal Cabinet Speaker
EN54
24
Certificate No : 1438/CPD/0178
BS-680F / BS-680FC
Features
Surface or flush-mounting
9 W continuous program
High sound quality through 16 cm double
cone speaker
High sound pressure level
Colour: off-white (RAL 9010 or equivalent)
BS-680FC is EN 54-24 certified and is
therefore legalised for use in conjunction
with fire detection systems.
Certificate No : 1438/CPD/0178
Certified Body : CNBOP-1438
41
Bridge wiring possible
Two ceramic screw terminal blocks and
thermal fuse (BS-680FC)
In compliance with BS 5839 part 8
(BS-680FC)
Enclosure metal, punched net grille
Mounting bracket: Zinc coated steel plate
with stainless steel bolts
For 100 V / 70 V Systems
Applications
Voice Evacuation System
Specifications
BS-680F
BS-680FC
Speaker Element
Rated Input
Tappings 100 V
Tappings 70 V
Frequency Response
SPL (1 W, 1 m)
Connector
Dimensions (W x H x D)
Weight
Other Features
16 cm double cone type
6W
6 W / 3 W / 1.5 W / 0.8 W
3 W / 1.5 W / 0.8 W / 0.4 W
150 Hz ... 20 kHz
94 dB
Push-in connector (bridging terminal)
310 x 190 x 87.2 mm
3 kg
–
16 cm double cone type
6W
6 W / 3 W / 1.5 W / 0.8 W
3 W / 1.5 W / 0.8 W / 0.4 W
150 Hz ... 20 kHz
94 dB
Screw terminal (ceramic) bridging available
310 x 190 x 87.2 mm
3 kg
BS 5839-8 equivalent and EN 54-24 certified
42
Ceiling Speakers - PC-1867F/FC
Firedome Ceiling Mount Speaker
Wide Dispersion Flush Mounted Ceiling Speakers
F-Series
EN54
24
Certificate No : 1438/CPD/0178
F-Series Wide Dispersion Flush Mounted Ceiling Speakers
TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to
overcome some of the limiting factors that have been associated with conventional ceiling-mount
speakers. Most noticeable has always been the high-frequency roll off that resulted from limited speaker
dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction
without treble attenuation over an expanded listening area thanks to the extra-wide dispersion
characteristics that are part of the overall speaker design.
Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural,
well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll off
characteristics as the distance between speaker and listener increases. An ideal ceiling-mounted
speaker's response characteristics should include wide dispersion and non-frequency dependent
directionality and this ceiling speaker series proves that.
Rim & Grille
PC-1867F / PC1867FC
Features
Ceiling speakers
9 W (continuous program)
Fire dome made of steel
Easy installation with spring catches
Baffle, frame, net: aluminium steel
Colour: off-white (RAL 9010)
PC-1867FC is EN 54-24 certified and is
therefore legalised for use in conjunction
with fire detection systems.
Certificate No : 1438/CPD/0183
Certified Body : CNBOP-1438
12 cm speaker
43
Wiring Diagram
Rim & Grille
l
For mounting in 156 mm holes
PC-1867F: screw terminals
PC-1867FC: ceramic screw terminal block (in
compliance with British Standard BS5839 Part 8)
Fire resistant baffle and rim, plus aluminium net
Applications
Especially for environments with demanding
safety requirements of fire protection in
public buildings like train terminal,
supermarket, office building, hotel
and fitness center
Conventional Speaker
System Features
Designed to blend into ceilings with a
smooth, low-profile design
Extra ease of use and higher cost
effectiveness with the metal "back can"
enclosure for the speaker
(F-122C, F-2352C, F-2852C, F-2322C models)
Expanded listening area coverage thanks to the extra
wide dispersion characteristics of TOA's ceiling speakers
Specifications
PC-1867F
PC-1867FC
Dynamic Cone Driver
Rated Input
Continuous Program
Tappings 100 V
Tappings 70 V
Frequency Response
SPL (1W, 1m)
SPL at Rated Input (1 m)
Dimension of Baffle
Mounting Depth
Ceiling Hole Diameter
Weight
12 cm
6W
9W
6 W / 3 W / 1.5 W / 0.8 W
3 W / 1.5 W / 0.8 W / 0.4 W
100 Hz ...16 kHz
90 dB
98 dB
ø 180 mm
110 mm
156 mm
1300 g
12 cm
6W
9W
6 W / 3 W / 1.5 W / 0.8 W
3 W / 1.5 W / 0.8 W / 0.4 W
100 Hz ...16 kHz
90 dB
98 dB
ø 180 mm
110 mm
156 mm
1300 g
Wide Dispersion
Minimal high frequency roll off allows clear
and well-balanced sound reproduction over a
wide listening area
makes it possible to utilize fewer speakers to cover a
desired area, allowing more cost-effective installations.
44
F-Series - F2322C
Wide Dispersion Ceiling Speaker with Flat Mounted Grille (30W)
F-Series - 2352C
2 Way Wide Dispersion Ceiling Speaker (30W)
EN54
EN54
24
24
-
F-2322C
Baffle
Baffle
Rim & Front Grille
Rim & Front Grille
Visible Diameter
Ceiling Mounting
F-2352C
Features
Compact bass reflex ceiling speaker
Flat front panel
Wide frequency response
High power
Quick and easy installation
Front grille: white (RAL 9010)
Steel plate back can
Fire resistant baffle and rim according to
UL94 V-0, plus steel punched net
45
Overload protection
For 8, 16 Ohm impedance and for
100 V/70 V line systems
Options
HY-AH1: Anchor Hanging Bracket
HY-BC1: Back Can
HY-TB1: Tile Bar Bridge
HY-TR1: Trim Ring
BS-5839 part 8 available as an option
Visible Diameter
Fire resistant baffle and rim according to
UL94 V-0, plus steel punched net
8 or 16 Ohm impedance or 100 V line
Features
2-way hi-fi speaker
60 W high power output
Diffuser with wide dispersion angle for high
quality sound over a wide area
• Less speakers required than in a
conventional speaker arrangement
• Colour: white (RAL 9010)
Steel plate back can
Ceiling Mounting
Options
Specifications
F-2322C
Specifications
F-2352C
System
Power Handling Capacity
Rated Input Power
Tappings 100 V
Tappings 70 V
Frequency Response
SPL (1 W / 1 m)
SPL at Rated Input (1 m)
Dimensions of Baffle
Mounting Depth
Ceiling Hole Diameter
Weight
12 cm Cone Driver, Bass-Reflex
120 W (8 Ohm)
30 W (High Impedance, 16 Ohm)
30 W / 10 W / 3 W / 1 W
30 W / 15 W / 5 W / 1.5 W / 0.5 W
70 Hz…20 kHz (-10 dB)
90 dB
105 dB
Ø 230 mm
max. 200 mm
200 mm
3.7 kg
System
Power Handling Capacity
Rated Input Power
Tappings 100 V
Tappings 70 V
Frequency Response
SPL (1 W / 1 m)
SPL at Rated Input (1 m)
Dimensions of Baffle
Mounting Depth
Ceiling Hole Diameter
Weight
2-Way, 12 cm Cone Driver, Bass-Reflex
120 W (8 Ohm)
30 W (High Impedance, 16 Ohm)
30 W / 10 W / 3 W / 1 W
30 W / 15 W / 5 W / 1.5 W / 0.5 W
70 Hz…20 kHz (-10 dB)
90 dB
105 dB
Ø 230 mm
max. 200 mm
200 mm
3.7 kg
HY-AH1: Anchor Hanging Bracket
HY-BC1: Back Can
HY-TB1: Tile Bar Bridge
HY-TR1: Trim Ring
BS-5839 part 8 available as an option
46
F-Series - F2852C
High Power 2 Way Wide Dispersion Ceiling Speaker (60W)
F-Series
Accessories for F-Series Speakers
EN54
24
HY-BC1 Back Can
HY-TR1 Trim Ring
The HY-BC1 Back Can is a
metal case attached to
flush-mount ceiling speaker
when mounted in exposed
applications.
The Back Can is hung from a
ceiling suspension pipe.
Baffle
The use of 2 Trim Rings allows
the speaker to be mounted in
holes from 240 mm to 300 mm in
diameter.
Rim & Front Grille
F-2852C
Visible Diameter
Ceiling Mounting
Features
47
Specifications
Finish
Weight
Accessory
Surface-treated steel plate, t0.8, black, paint
1,5 kg
Rubber grommet x 2
HY-TB1 Tile Bar Bridge
2-way Speaker
For high power (60 W) Application
Locations with higher ceilings (3 to 6 meter)
Diffuser for wide dispersion of high
frequencies
For 8, 16 Ohm and 100 V line
Back can made of steel
Fire resistant baffle and rim according to
UL94 V-0, plus steel punched net
Halls, Corridors, Stairways
Options
Specifications
F-2852C
System
Power Handling Capacity
Rated Input Power
Tappings 100 V
Tappings 70 V
Frequency Response
SPL (1 W / 1 m)
SPL at Rated Input (1 m)
Dimensions of Baffle
Mounting Depth
Ceiling Hole Diameter
Weight
2-way, 16 cm Cone Driver, Bass-Reflex
180 W (8 Ohm)
60 W (High Impedance, 16 Ohm)
60 W / 30 W / 15 W / 3 W
60 W / 30 W / 15 W / 7.5 W / 1.5 W
60 Hz…20 kHz (-10 dB)
91 dB
109 dB
Ø 280 mm
max. 227 mm
250 mm
5.1 kg
The HY-TR1
Trim Ring
allows
installation of
flush-mounted
ceiling
speakers in
pre-existing
ceiling panel
holes which
are over
200 mm in
diameter.
HY-AH1: Anchor Hanging Bracket
HY-TB1: Tile Bar Bridge
Specifications
Ceiling Hole Diameter
Finish
Weight
ø200 – ø300 mm
Surface-treated steel plate, white, paint
500 g
HY-AH1 Anchor Hanging Bracket
The HY-TB1 is a channel bar to be used when
supporting flush mounted ceiling speakers by way
of ceiling bars to prevent their full weight from
being directly applied to the ceiling panel
during installation. This channel bar is
used in conjunction with
reinforcement hardware supplied
with the speaker.
The HY-AH1 Anchor Hanging Bracket is designed to support
ceiling suspended speakers from an anchor bolt in order to
prevent the speaker's full weight from being directly applied to
the ceiling panel. It is used in conjunction with reinforcement
hardware supplied with the speaker.
1 complete set consists of
2 HY-TB1 bars.
Specifications
Finish
Weight
Accessory
Steel plate, plating
500 g (for set of 2 bars)
Mounting screw x 4
Specifications
Finish
Weigh
Accessory
Steel plate, plating
700 g
Paper pattern x 1
48
CS-64
Splashproof Projection Speaker
CS-154 / CS-304
Splash-proof Projection Speaker
EN54
EN54
24
24
Stainless Steel Bracket
CS-154 / CS-304
CS-64
Stainless Steel Bracket
Bracket Dimensions
Features
Round splashproof speaker
6W
For outdoor use
Lightweight and rugged construction
Exponential horn for improved directivity
High SPL
Front Grille
Complete with mounting bracket for easy
installation
For 100 V, 70 V systems with rotary
impedance selector switch
The enclosure complies with IP-64 Standards
Options
BS-5839 part 8
49
Specifications
CS-64
Speaker Component
Rated Input
Continuous Program
Tappings 100 V
Tappings 70 V
Frequency Response
SPL (1 W, 1 m)
Dimensions
Weight
Finish
12 cm
6W
9W
6 W / 3 W /1 W
6 W / 3 W / 1,5 W / 0,5 W
130 Hz ... 13 kHz
96 dB
233 x 224 x 208 mm
1.5 kg
ABS resin, off-white, punched net: dark grey, bracket, screws: stainless steel
Front Grille
Features
Square splashproof speaker (IP 64) for
outdoor use
15 W (CS-154) or 30 W (CS-304)
High SPL
Weatherproof polyurethane resin paint
Impact-proof light weight ABS resin
enclosure
Complete with stainless steel mounting
bracket for easy installation
For 100 V, 70 V systems with rotary
impedance selector switch
Constant directivity coverage
(90 degree in horizontal)
Options
BS-5839 part 8
Specifications
CS-154
CS-304
Dynamic Cone Driver
Rated Input
Continuous Program
Tappings 100 V
Tappings 70 V
Frequency Response
SPL (1 W, 1 m)
Dimensions
Weight
Features
Finish
12 cm
15 W
22.5 W
15 W / 10 W / 5 W
15 W / 7.5 W / 5 W / 2.5 W
150 Hz ... 15 kHz
97 dB
366 x 230 x 272 mm
2.8 kg
IP 64 weatherproof
ABS resin, off-white, punched net:
dark grey, bracket, screws: stainless steel
12 cm
30 W
45 W
30 W / 20 W / 10 W
30 W / 15 W / 10 W / 5W
120 Hz ... 15 kHz
98 dB
366 x 230 x 272 mm
3.1 kg
IP 64 weatherproof
ABS resin, off-white, punched net:
dark grey, bracket, screws: stainless steel
50
BS-1034
Box Speaker
SC-610M / SC-615M / SC-630M
Reflex Horn Speaker with Wide Emergency Response
EN54
24
Features
Easy and quick installation
Two colours selectable: off-white,
which matches any interior style,
and silver, which adds a quality appearance.
Beautiful design due to the
Golden Ratio (1: 1.618)
Innovative speaker design
Low profile
Ideally suited for BGM and announcements
Features
EN54
24
Specifications
BS-1034
Rated Input
Rated Impedance
10 W
100 V line: 1 kΩ (10 W), 2 kΩ (5 W), 3.3 kΩ (3 W), 10 kΩ (1 W)
70 V line: 500 Ω (10 W), 1 kΩ (5 W), 2 kΩ (2.5 W), 3.3 kΩ (1.5 W), 10 kΩ (0.5 W)
90 dB (1 W, 1 m)
120 - 20,000 Hz
Low frequency: 12 cm (5") cone-type, High frequency: Balanced dome-type
M4 screw terminal, distance between barriers: 11 mm (0.43")
Enclosure: HIPS resin (fire resistant grade UL94 V-0 or its equivalent),
off-white (RAL 9010 or equivalent color)
Net: Steel plate, off-white (RAL 9010 or equivalent color), paint
210 (W) × 330 (H) × 80 (D) mm (8.27" × 12.99" × 3.15")
1.4 kg (3.09 lb)
Speaker receptacle …1, Wall mounting screw …2
Sensitivity
Frequency Response
Speaker Component
Input Connector
Finish
Dimensions
Weight
Accessories
51
Options
3 different power outputs available:
10 W (SC-610M), 15 W (SC-615M)
or 30 W (SC-630M)
High impedance 100 V line
BS-5839 part 8 available as an option
EN54
24
Specifications
SC-610M
SC-615M
SC-630M
Rated Input
Rated Impedance 100 V
Rated Impedance 70 V
SPL (1 W, 1 m)
Frequency Response
Sensitivity when used as
Microphone
Operating Temperature
10 W
10 W / 5 W / 3 W / 1 W
10 W / 5 W / 2.5 W / 1.5 W / 0.5 W
110 dB (at 500 to 2500 Hz peak level)
315 ... 12,500 Hz
-24 dB at 1 kHz
15 W
15 W / 10 W / 5 W / 3 W
15 W / 7.5 W / 5 W / 2.5 W / 1.5 W
112 dB (500 to 2500 Hz peak level)
280 ... 12,500 Hz
-22 dB at 1 kHz
30 W
30 W / 15 W / 10 W / 5 W
30 W / 15 W / 7.5 W / 5 W / 2.5 W
113 dB (at 500 to 2500 Hz peak level)
250 ... 10,000 Hz
-20 dB at 1 kHz
-20°C ... +55°C
(must be free from dew condensation)
600 mm in length, 6 mm in diameter,
Polyvinyl chloride insulated cable
172 x 161 x 188 mm
1.2 kg
IP65 weatherproof
-20°C ... +55°C
(must be free from dew condensation)
600 mm in length, 6 mm in diameter,
Polyvinyl chloride insulated cable
222 x 179 x 234 mm
1.3 kg
IP65 weatherproof
-20°C ... +55°C
(must be free from dew condensation)
600 mm in length, 6 mm in diameter,
Polyvinyl chloride insulated cable
285 x 227 x 277 mm
2 kg
IP65 weatherproof
Speaker cable
Dimensions (W x H x D)
Weight
Features
52
PJ-64 / PJ-304
Projection Speaker for Ceiling and Wall
PE-64 / PE-304
Speaker for Ceiling Suspension Installation
EN54
24
Speaker
PE-64 / PE-304
Adjustment Angle
PJ-64 / PJ-304
Features
Indoor speaker
Wide range frequency response
Housing: HIPS resin, grille: steel net
Easy to mount
Colour off-white (RAL 9010 or equivalent)
Paintable
53
Specifications
PJ-64
Speaker Component
Rated Input
Impedance
Tappings 100 V
Tappings 70 V
Frequency Response
SPL (1 W, 1 m)
Dimensions (with bracket)
Weight
12 cm
6W
100 V / 70 V
6W/3W/1W
3 W / 1.5 W / 0.5 W
100 Hz ... 18 kHz
90 dB
ø 186 x 369 mm
1.5 kg
For 100 V, 70 V systems, PJ-304 additionally
for 8 Ohm systems
Complete with mounting bracket for easy
installation
Applications
For buildings where aesthetics play an
important role
PJ-304
12 cm
30 W
100 V / 70 V / 8 Ohm
30 W / 20 W / 15 W / 10 W / 5 W
30 W / 20 W / 15 W / 10 W / 5 W
70 Hz ... 20 kHz
91 dB
ø 186 x 369 mm
2.1 kg
Ceiling Cover
Features
Special design to blend with lighting equipment
30 W (PE-304) or 6 W (PE-64) rated input
Rugged HIPS resin enclosure
Excellent sound quality
Colour: off-white (RAL 9010 or equivalent)
Paintable
12 cm dynamic cone speaker plus balanced
dome tweeter
• Inputs for 100 V and 70 V systems, PE-304
additionally with 8 Ohm input.
• Easy impedance selection
• Equipped with 5 m cord
Applications
Supermarket, shopping mall, lobby, rooms
without suspended ceilings
Specifications
PE-64
PE-304
Dynamic Cone Driver
Rated Input
Impedance
Tappings 100 V
Tappings 70 V
Frequency Response
SPL (1 W, 1 m)
Connection
Dimensions
Weight
12 cm
6W
100 V / 70 V
6 W / 3 W /1 W
3 W / 1.5 W / 0.5 W
100 Hz...18 kHz
90 dB
Push-in connector (bridging terminal, 2-branch)
ø 186 x 251 mm
1.5 kg
12 cm
30 W
100 V / 70 V / 8 Ohm
30 W / 20 W / 15 W / 10 W / 5 W
30 W / 20 W / 15 W / 10 W / 5 W
70 Hz...20 kHz
91 dB
Push-in connector (bridging terminal, 2-branch)
ø 186 x 251 mm
2.1 kg
54
Line Array Speaker Systems
Type-H / Type-S Series
Slim Line Array Speakers with Clear and Well Focused Sound Enhancement
Among TOA's wide range of sound reinforcement products, Line Array Speaker Systems play an
important role in providing high quality audio for medium sized venues that can range from houses of
worship, gymnasiums, to various sports facilities and other problematic environments.
TOA Line Array Speaker Systems are designed to perform optimally with ideal sound dispersion
characteristics in spaces that pose difficulties for more conventional speaker systems. Available in
different configurations and with a wide range of mounting possibilities to suit particular requirements
precisely, these slim tower-configured speakers and modular speaker systems offer perfect solutions
for difficult sound reinforcement problems that require effective coverage.
TOA Line Array Speaker Systems are designed for permanent installations and are available in slim,
tower-configured types, the SR-S4L and SR-S4S (Type S). The SR-H Series comprises of small, unobstrusive Line Arrays and is especially designed for locations with regular speech transmission.
The ultimate goal in providing this sophisticated acoustical design is to increase intelligibility even in situations where the listener is under stress such as emergency situations..
Line Array Speaker
55
Standard Speaker
56
Line Array Speaker Systems - Type-H Series
SR-H2L / SR-H2S / SR-H3L / SR-H3S
Line Array Speaker Systems - Type-H Series
System Specification
Curved speaker models rely on a
hyper-clothoid concept curved array that
ensures improved horizontal dispersion.
Application Versatility
Selection among four models is possible,
enabling more extensive customization of the
listening area.
Most applications are fully covered by
no-extension (one cabinet) set-ups, but up to
two units can be connected when an
expanded vertical coverage area is suitable.
*Straight type only
Attractive & narrow 84mm design is thinner
than earlier similar units, allowing speakers
to fit in well with the interior decor of the
venue.
Space/Energy Efficient Design
SR-H2L / SR-H2S / SR-H3L / SR-H3S
Energy-efficient line array configuration
requires less input power to deliver required
output.
High-quality sound reproduction even when
an equalizer is not used.
Fully effective operation is possible without
additional amplification equipment, saving
space and adding to the unit's cost
effectiveness.
Outstanding Sound Quality
Easy and Flexible Installation
Sync-Drive (Synchronous Nexus Control)
technology keeps the audio in phase with its
source at the speakers to create an ideal
linear sound source.
Line array configuration of speakers works to
produce clear sound with reduced
attenuation over distance.
Speakers are reflection-free and
feedback resistant.
Speakers are designed for optimally precise
directivity of sound, especially horizontal
directivity, so the audio dispersion can be
more accurately focused at the targeted area.
57
A wide variety of optional mounting brackets
is available, for wall-mounting, rigging, and
stand mounting the Type H speakers.
Removable input terminal
connectors make hook-ups
easier and less
cumbersome.
For high-impedance
operation, an optional
matching transformer
MT-S0301 is available.
Specifications
Enclosure
Power Handling Capacity
Rated Impedance
Sensitivity (1W, 1m
equivalent measured at 4m)
Frequency Response
Directivity Angle
Speaker Component
Input Connector
Finish Enclosure:
Front grille:
Dimensions
Weight
Option
Specifications
Enclosure
Power Handling Capacity
Rated Impedance
Sensitivity (1W, 1m
equivalent measured at 4m)
Frequency Response
Directivity Angle
Speaker Component
Input Connector
Finish Enclosure:
Front grille:
Dimensions
Weight
Option
SR-H2L
Bass-reflex type
Continuous program: 180W
8Ω
92dB
SR-H2S
Bass-reflex type
Continuous program: 180W
8Ω
90dB
80 – 18,000Hz
90 – 17,000Hz
(when using optional Digital processor)
(when using optional Digital processor)
Horizontal: 90°
Horizontal: 90°
Vertical: 0°
Vertical: 20°
(within the range of speaker height)
(within the range of speaker height)
7cm (2.8") cone-type × 9
7cm (2.8") cone-type × 9
Removable input connector
Removable input connector
MDF, white, urethane paint
MDF, white, urethane paint
Punched steel plate, white, acrylic paint
Punched steel plate, white, acrylic paint
84 (W) × 668.4 (H) × 115 (D)mm
84 (W) × 663.4 (H) × 115 (D)mm
(3.31" x 26.31" x 4.53")
(3.31" x 26.12" x 4.53")
4.4kg (9.7 lb)
4.2kg (9.26 lb)
Extension plate: SR-EP3, Wall mounting bracket: SR-WB3, Wall tilt bracket: SR-TB3, Flying bracket:
SR-FB3, Speaker stand adapter: SR-SA3,
Speaker stand: ST-33B, Matching transformer: MT-S0301, Digital processor:
SR-H3L
Bass-reflex type
Continuous program: 180W
8Ω
95dB
SR-H3S
Bass-reflex type
Continuous program: 180W
8Ω
92dB
110 – 18,000Hz
90 – 17,000Hz
(when using optional Digital processor)
(when using optional Digital processor)
Horizontal: 90°
Horizontal: 90°
Vertical: 0°
Vertical: 20°
(within the range of speaker height)
(within the range of speaker height)
7cm (2.8") cone-type × 16
7cm (2.8") cone-type × 16
Removable input connector
Removable input connector
MDF, white, urethane paint
MDF, white, urethane paint
Punched steel plate, white, acrylic paint
Punched steel plate, white, acrylic paint
84 (W) × 1186.4 (H) × 115 (D)mm
84 (W) × 1177.2 (H) × 157 (D)mm
(3.31" x 46.71" x 4.53")
(3.31" x 46.35" x 6.18")
7.6kg (16.75 lb)
7.9kg (17.42 lb)
Extension plate: SR-EP3, Wall mounting bracket: SR-WB3, Wall tilt bracket: SR-TB3, Flying bracket:
SR-FB3, Speaker stand adapter: SR-SA3,
Speaker stand: ST-33B, Matching transformer: MT-S0301, Digital processor
58
Line Array Speaker Systems - Type-S Series
SR-S4L / SR-S4LWP / SR-S4S / SR-S4SWP
Line Array Speaker Systems - Type-S Series
SR-S4L / SR-S4LWP / SR-S4S / SR-S4SWP
distant from the speakers, providing a uniform
response. Individual speaker systems of each
type can be assembled together as multiple
configurations, acting as longer sound
sources that can deliver greater output as well as
project the sound a greater distance.
Reflection Free
Driver Complement
Both speaker types are 2-way line array
speakers, each containing 32 speaker
elements 8 x 10 cm woofers and 24 high
frequency drivers. Driver units are installed
vertically and with minimal space between
units in order to create a continuous linear sound
source. This enables delivering a uniform sound
pressure that resists attenuation with distance.
Sound Dispersion Characteristics
The SR-S4L speaker features a linear design
tailored for distance sound transmission
applications and the SR-S4S features a gently
curved line designed for a 10° vertical coverage
area which offers ideal sound coverage over a
shorter distance.
Directed Sound Dispersion
Type S Series speakers limit vertical sound
dispersion in order to focus directivity at the
targeted listening area.
The speakers' construction and characteristics
make them resist floor and ceiling-originating
reflections, enhancing clarity even in reverberant
spaces and other problematic environments.
Feedback Resistant
The design of the speakers also makes them
highly resistant to annoying feedback because
volume levels are not extraordinarily high even
close to the speakers and makes setting gain
levels easier.
Biamp or Single Amp Drive
Factory-set for single amplifier driving, the Type S
series speakers can simply be set for biamping by
making a simple internal wiring change. For
optimal biamping, a digital signal processor can
be employed to set crossover frequency points.
High Impedance Compatible
The speaker can also be conveniently set for high
impedance applications by using the optional
MT-S0601 matching transformer. This option is
only possible when driving the speaker with a
single amplifier.
Multi Speaker Array Configurable
Both systems can be combined to realize a
versatile speaker array that performs equally well
in terms of sound coverage and dispersion over
short and long distances. Less difference in sound
level is perceived whether close to or somewhat
59
Line Array Speaker
Standard Speaker
SR-S4L / SR-S4LWP / SR-S4S / SR-S4SWP
60
Line Array Speaker Systems - Type-S
System Specification
Specifications
Enclosure
Power Handling Capacity
Rated Impedance
Sensitivity (1W, 1m)
Frequency Response
Crossover Frequency
Directivity Angle
Speaker Component
Input Connector
Connected Cable
Dust/Water Protection
Finish
Enclosure:
Front grille:
Dimensions
Weight
Accessory
Option
61
SR-S4L
Line Array Speaker Systems - Type-S
System Specification
SR-S4LWP
Bass-reflex type
Sealed type
Continuous program: 600W (single amp mode)
Continuous program: 600W (single amp mode)
Low 240W, High 240W (biamp mode)
Low 240W, High 240W (biamp mode)
8Ω (single amp mode) / Low 8Ω, High 8É∂ (biamp mode) 8Ω (single amp mode) / Low 8Ω, High 8É∂ (biamp mode)
94dB (1W, 1m)
94dB (1W, 1m)
70 – 20,000Hz (when using the optional Digital processor)
3,500Hz
3,500Hz
Horizontal: 90°
Horizontal: 90°
Vertical: 0° (within the range of speaker height)
Vertical: 0° (within the range of speaker height)
Low frequency: 10cm (4") cone-type × 8
Low frequency: 10cm (4") cone-type × 8
High frequency: 2.5cm (1") balanced dome-type × 24 High frequency: 2.5cm (1") balanced dome-type × 24
M5 screw terminal, distance between barriers:
M5 screw terminal, distance between barriers:
12.2mm and Neutrik NL4MP x 2
12.2mm and Neutrik NL4MP x 2
—
Direct cable withdrawal from internal speaker:
ø8.6mm, conductor cross section: 1.25mm2,
4-core cable, 3m
—
IPX4
MDF, white, paint
Plywood, white, urethane coating
Punched steel plate, white, acrylic paint
Punched stainless steel (SUS304), white, paint
160 (W) × 895 (H) × 255 (D)mm (6.30" × 35.24" × 10.04") 160 (W) × 895 (H) × 255 (D)mm (6.30" × 35.24" × 10.04")
16kg (35.27 lb)
16kg (35.27 lb)
Bi-amplifier drive rating label × 1, Bi-amplifier drive input indication label × 1
Matching transformer: MT-S0601, Extension plate:
Matching transformer: MT-S0601, Extension plate:
SR-EP4, Flying bracket: SR-FB4, Wall mounting
SR-EP4WP, Wall tilt bracket: SR-TB4WP,
bracket: SR-WB4, Wall tilt bracket: SR-TB4,
Wall mounting bracket: SR-WB4WP,
Stand adapter: SR-SA4, Protection pad: SR-PP4,
Protection pad: SR-PP4, Digital processor: DP-0206
Floor stand: SR-FS4, Digital processor: DP-0206
Specifications
Enclosure
Power Handling Capacity
Rated Impedance
Sensitivity (1W, 1m)
Frequency Response
Crossover Frequency
Directivity Angle
Speaker Component
Input Connector
Connected Cable
Dust/Water Protection
Finish
Enclosure:
Front grille:
Dimensions
Weight
Accessory
Option
SR-S4S
SR-S4WWP
Bass-reflex type
Sealed type
Continuous program: 600W (single amp mode)
Continuous program: 600W (single amp mode)
Low 240W, High 240W (biamp mode)
Low 240W, High 240W (biamp mode)
8Ω (single amp mode) / Low 8Ω, High 8É∂ (biamp mode) 8Ω (single amp mode) / Low 8Ω, High 8É∂ (biamp mode)
93dB (1W, 1m)
93dB (1W, 1m)
70 – 20,000Hz (when using the optional Digital processor)
3,500Hz
3,500Hz
Horizontal: 90°
Horizontal: 90°
Vertical: 10°
Vertical: 10°
Low frequency: 10cm (4") cone-type × 8
Low frequency: 10cm (4") cone-type × 8
High frequency: 2.5cm (1") balanced dome-type × 24 High frequency: 2.5cm (1") balanced dome-type × 24
M5 screw terminal, distance between barriers:
M5 screw terminal, distance between barriers:
12.2mm and Neutrik NL4MP x 2
12.2mm and Neutrik NL4MP x 2
—
Direct cable withdrawal from internal speaker:
ø8.6mm, conductor cross section: 1.25mm2,
4-core cable, 3m
—
IPX4
MDF, white, paint
Plywood, white, urethane coating
Punched steel plate, white, acrylic paint
Punched stainless steel (SUS304), white, paint
160 (W) × 892 (H) × 303 (D)mm (6.30" × 35.12" × 11.93") 160 (W) × 892 (H) × 303 (D)mm (6.30" × 35.12" × 11.93")
16kg (35.27 lb)
16kg (35.27 lb)
Bi-amplifier drive rating label × 1, Bi-amplifier drive input indication label × 1
Matching transformer: MT-S0601, Extension plate:
Matching transformer: MT-S0601, Extension plate:
SR-EP4, Flying bracket: SR-FB4, Wall tilt bracket:
SR-EP4WP, Wall tilt bracket: SR-TB4WP,
SR-TB4, Stand adapter: SR-SA4, Protection pad:
Protection pad: SR-PP4, Digital processor: DP-0206
SR-PP4, Digital processor: DP-0206
62
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising