Industrial Bolting S.. - Tool

Industrial Bolting S.. - Tool
Industrial Bolting
Solutions
Contents
3/8"-3/4" Class ImpactoolsTM
Introduction/Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
3/8"
Class Impactools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1/2"
Class Impactools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5/8"
and 3/4" Class Impactools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10
1"-31/2" Class Impactools
Introduction/Product Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1" Class Impactools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-13
11/2" Class Impactools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
21/2" and 31/2" Class Impactools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Impactool Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17
The new
corporate and brand identity, introduced in 2000, is now being incorporated into product identification and
packaging, as well as all communications. While most product photography in this catalog still reflects the previous symbol and logotype
signature, you will soon see our new look on everything IR.
Torque Control Impactools
Introduction/Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Torque Control Impactools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-20
Electric Impactools
Introduction/Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Electric Impactools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Quick Reference/Index to Impactool Models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Pressure Feed Lubrication and Power Regulator Systems . . . . . . . . . . . . . . . . . . . . . . . 23
Impactool Sockets and Accessories
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Sockets and Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-30
Balancers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-34
Comfort Grips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Blow Guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-37
Tune-up Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Hose Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38-39
Impactools Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
1
Introduction
Three Different Rankings
Three different rankings help to define the
IR line of Impactools:
• Super Duty Tools are intended for high
volume production or heavy maintenance and construction, where ultimate
performance and durability are required.
These tools incorporate a number of
unique added features, as well as the
finest materials and bearings, tightest
tolerances, and most powerful impact
mechanisms.
Impactools
• Heavy Duty Tools are well-suited to
medium volume production or general
maintenance and construction tasks,
and offer a good balance between
performance and economy.
They’re the hardest-working tools of all.
Nothing cuts as much time, or packs more
labor-saving power than the Impactool.
• Standard Duty Tools are intended
for less frequent use, involving lighter
materials.
Imagine the manual process of a hammer
striking against a hand wrench to tighten
or loosen nuts and bolts. Then consider
the sheer size and scope of those bolts —
up to 4 inches in diameter — joining parts
and components literally weighing tons,
and exerting even greater forces. No small
task, but one mastered by tools that create incredible energy out of compressed
air or electricity, converting motor torque
into a series of powerful rotary blows.
Choices for Every Application
For almost seventy years, Ingersoll-Rand
has pioneered the development and
advancement of Impactools, and today
leads the industry with the most complete
product selection available. Throughout
this catalog, you will find two different
types of IR Impactools in three different
performance rankings, designed to match
the full spectrum of applications.
Two Different Types
Conventional Impactools, in most cases,
provide a torque output setting, but rely
largely on operator judgment to determine
when a fastener is sufficiently tightened.
These are the most popular Impactools,
and include air as well as electric models.
Torque Control Impactools (air only) provide automatic shutoff upon reaching a
preset torque level. They are designed for
applications requiring accurate fastener
tightening, and incorporate built-in or
detachable torsion bars. Based on their
diameter and degree of adjustment, the
torsion bar senses a predetermined torque
level, and mechanically signals an internal
shut-off device to prevent over-torquing.
2
Still more choices exist, with a variety of
Impactool configurations designed to suit
the particular job at hand — for example
...small and medium-sized tools with
straight or pistol-grip handles...and larger
models with inside trigger, outside trigger,
or lever throttle handles. Drive sizes range
from 3⁄8-inch to 31/2-inch square drive, and
also include spline drives for maximum
power transmission in demanding applications. In addition, you can specify certain
tools with quick-change anvils for use
with extended socket devices, special
screwdriver bits, wood augers, and more.
Seventy Years of Leadership
Throughout its history, Ingersoll-Rand has
earned a global reputation for creating
tools that solve problems, build productivity, and put more power in the hands of the
worker. The development of IR Impactools
is a particularly strong case in point.
Air Power
Invented by Robert Pott in the early
1930s, the first Impactool was electrically
powered, and replaced a manual, laborintensive process for applications in the
agricultural industry. The tools quickly
became popular in heavy industrial applications, proving their value in railroad
maintenance, bridge construction, refineries, and many other roles. Ingersoll-Rand
consulted with Pott and suggested the use
of compressed air as a power source, with
a new air motor package that the company had designed. Ingersoll-Rand later
acquired the original Impactool patent
rights from Pott, and began testing its own
designs. In 1934, IR introduced its first air
Impactool models, in 3⁄4-inch drive sizes.
Impactool Evolution
Several years later, IR replaced the
original impact mechanism with its own
ball and cam design, utilizing two steel
balls trapped in opposing helical ball
races on the hammer and cam. Shortly
thereafter, IR replaced the gear-driven
forward/reverse mechanism by simply
changing the flow of air to the motor. This
power package forms the basis for many
of today’s Impactools.
Throughout the 1950s and ‘60s, IR continued to expand its Impactool offerings as
new and different applications arose. New
advancements included the first torque
control tools, designed to stop at predetermined settings, as well as numerous
refinements to impact power mechanisms.
Ingersoll-Rand revolutionized Impactool
design in the 1970s with the development
of the twin-hammer mechanism, extracting
more power with fewer moving parts than
ever before. Two hammers strike instantaneous, balanced blows to the anvil lobes,
generating increased torque with minimal
vibration. And today, the advancements
continue. The IR2904, 2131, and 2925
Series Models all deliver more power,
comfort, and control then anything else
in their respective classes. All reflect the
IR philosophy of High Performance
Ergonomics — user oriented design that
provides real-world productivity benefits...
based on a systematic, objective measure
of ergonomic factors for validation and
value.
In general, Ingersoll-Rand Impactool
mechanisms can be identified by the first
one or two digits of the model number:
The selection guide will indicate recommendations based on types of fasteners
and tools, using examples from the
IR product line carrying the Super Duty
rating. However, please refer to the tool
specification pages for information on
full line availability. In addition, check the
Quick Reference on page 23.
• Twin-hammer: “2" (except 2902, 2903)
• Jumbo hammer: “17” (plus 2902, 2903)
• Ball and cam: “5” (plus electric
Impactools)
Make the Right Choice
On the following pages, you will find a
detailed review of the complete IngersollRand Impactool line, including performance specifications, special features, standard equipment, and relevant accessories.
We have also provided an Impactool
Selection Guide on pages 16-17. This will
assist in the selection process by defining
the following considerations:
IR Impactools. The hardest-working tools
of all, backed by the best support in the
industry.
• Diameter of fastener being used
• Grade of fastener being used
• Torque control vs. conventional
• Required torque (if applicable)
Three Types of Impactool Mechanisms
Twin-Hammer
A simplified, yet highly effective design that holds each
of the reversible hammers
in full engagement or disengagement
with centrifugal force. The twin-hammer
mechanism delivers more power per
pound, and is less sensitive to air pressure fluctuations than any other design.
• Smooth, balanced blow
• High power-to-weight ratio
• Suitable for hard or soft-draw
applications
Jumbo Hammer
Similar in concept to the twinhammer mechanism, but
employing a single hammer.
Ball and Cam
Precision mechanism converts motor
torque into powerful rotary impacts.
A planetary gear drive delivers smooth,
constant speed from the motor. The ball
and cam mechanism is ideal for soft
draw applications, and is utilized in larger
Impactools, as well as in all torque control
and electric Impactools.
• Air or electric
• Does not stall
• A time-tested design
• Simplified design
• Reversible hammers
• Direct drive
Configurations
Quick Change
Inside Grip
Outside Grip
Square Drive
Straight
Pistol
Spline Drive
3
3/8"-3/4" Class Impactools
Ingersoll-Rand’s wide range of
Impactools offers you the flexibility
you need to fit even your most
unique applications properly. From
applications involving lighter materials
and less frequent use to assembly
or even maintenance, repair, and
operation (MRO) applications, we’ve
got the right tool for the job. Our
product selection covers the full range
of drive sizes and configurations.
In this section, choose from 3⁄8-inch
drive models such as the compact
2904 to IR’s 3⁄4-inch class Series 2925.
4
3/8" Class Impactools
● 2902P1
■ 1702P4
▲ 2904P1
Hanger not included
★ 1702SB1
Features
Standard Equipment
• Twin-hammer impact mechanism on Series 2904
• Jumbo Hammer impact
mechanism on Series 2902
and 1702
• Durable epoxy-coated motor
housing and handle
• Plated steel hammer case
• Pressure-feed impact
mechanism lubrication
Series 2902 and 2903
• 1⁄4" NPT inlet
• Steel hammer case
• Integral muffler
• Built-in power regulator
• Pin-type socket retainer
Model
Drive
Description Handle
Series 1702
• 1/4" NPT inlet
• Steel hammer case
• B1 abd B3 model: Inside
throttle and dead handle
• Pin-type socket retainer
• Built-in power regulator (P)
Series 2904
• 1⁄4" NPT inlet
• Steel hammer case
• Composite housing
• Power management system
Free
Speed
rpm
Impacts
per
minute
Series 2902
• Vertical hanger
No. 1901–365 (B)
• Horizontal hanger
No. 1901-366 (P&B)
Series 2903
• Vertical hanger
No. 2908–365
• Horizontal hanger
No. 1901-366
Equipment at Extra Price
Series 1702
• Vertical hanger
No. 1901–365 (B)
• Exhaust muffler kit
No. 212–K23 (P)
• Horizontal hanger
No. 1901-366
Maximum
Torque
ft.-lb. Nm
Recomm.
Torque
Range
ft.-lb.
Nm
140
20-120
Weight,
less socket
lb.
kg
Length,
less socket
in.
mm
Side to
Center Size Hose
Distance Recomm. CFM
in. mm in. mm
Super Duty Impactools
● 2902P1 3/8" square
2903P2
3/8"
Pistol
10,000
1500
190
27-163
21/2
1.25
51/2
140
13/8
35
5/16
8
15
square
Pistol
6000
1200
205
278
30-170
41-230
413/16
2.18
55/8
143
13/8
35
3/8
10
21
▲ 2904P1 3/8" square
Pistol
14,500
1500
230
313
25-200
34-270
2.65
1.20
53/4
146
11/8
29
3/8
10
18
260
354
Reverse Bias
2904P4 1/4" hex QC Pistol
Reverse Bias
14,500
1500
260
354
25-200
34-270
2.65
1.20
53/4
146
11/8
29
3/8
10
18
Straight 10,000
1500
105
142
13-85
18-115
21/2
1.12
57/8
149
1
25
5/16
8
13
Pistol
1500
125
170
20-100
27-136
23/4
1.25
51/2
140
13/8
35
5/16
8
15
27-136
23/4
1.25
51/2
140
13/8
35
5/16
8
15
Heavy Duty Impactools
★1702SB1 3/8" square
1702P1 3/8" square
■ 1702P4
1/4"
hex QC
Pistol
10,000
10,000
1500
125
170
20-100
“QC” designates a Quick Change chuck.
Note: All of the above square drive Impactools furnished with pin-type retainer.
Performance figures are at 90 psi (620kPa) air pressure.
5
1/2" Class Impactools
Features
• Jumbo hammer impact mechanism
on Series 2903
• Rugged twin-hammer impact
mechanism on 2906
• Durable epoxy-coated motor
housing and handle
• Plated steel hammer case
• Pressure-feed impact mechanism
lubrication
Standard Equipment
Series 2903
• 1⁄4" NPT inlet
• Steel hammer case
• Built-in lubricator
• Integral muffler
• Built-in power regulator
▲ 2903P1
★ 2906P1
Series 2707
• 1⁄4" NPT inlet
• Steel hammer case
• Built-in power regulator
Series 2131
• 1⁄4" NPT inlet
• Steel hammer case
• Composite housing
• Built-in power regulator
Models 2705A1
• 1⁄4" NPT inlet
• Steel hammer case
• Built-in power regulator
Series 2906
• 1⁄4" NPT inlet
• Steel hammer case
• Built-in lubricator
• Integral muffler
• Two-piece motor housing
• Built-in power regulator
Equipment at Extra Price
Series 2903, 2908
• Vertical hanger No. 2908-365
● 2131P
Series 2705
• Vertical hanger No. 904-366
Series 2131
• Vertical hanger No. 2131-366
Model
Drive
Description Handle
Free
Speed
rpm
Impacts
per
minute
Maximum
Torque
ft.-lb. Nm
Recomm.
Torque
Range
ft.-lb.
Nm
Weight,
less socket
lb.
kg
Length,
less socket
in.
mm
Side to
Center Size Hose
Distance Recomm. CFM
in. mm in. mm
Super Duty Impactools
★ 2906P1
1/2"
square
Pistol
5000
1200
500
678
40-350 54.2-475
▲ 2903P1
1/2"
square
Pistol
6000
1200
220
298
30-185
Pistol
7750
1300
450
610
1/2" square
Pistol
Reverse Bias
9500
1200
450
600
7/16"
6
2.72
67/8
175
111/32
34
3/8
10
23
41-250
4 ⁄16
2.18
55/8
143
13/8
35
3/8
10
21
40-275
54-373
6
2.72
61/2
165
13/8
35
5/16
8
26
610
816
50-400
68-542
41/2
2.04
67/8
174
13/8
35
3/8
10
27
13
Heavy Duty Impactools
2707A1
1/2"
square
Standard Duty Impactools
● 2131P
2131P7
hex QC Pistol
Reverse Bias
9500
1200
450
600
610
816
50-400
68-542
41/2
2.04
67/8
174
13/8
35
3/8
10
27
2705A1
1/2"
8500
1200
400
542
40-200
54-271
55/8
2.55
63/4
171
111/32
34
3/8
10
23
2904P2
1/2"
1.20
53/4
146
11/8
29
3/8
10
18
square
Pistol
square
Pistol 14,500
Reverse Bias
1500
230
260
313
354
25-200
34-270
2.65
All of the above square drive Impactools furnished with pin-type retainer. Performance figures are at 90 psi (620 kPa) air pressure.
6
5/8" and 3/4" Class Impactools
Introducing the IR2925B.
1700 ft.- lbs. of max torque ÷ 14 lbs. of tool
With an ergonomically designed handle
and grip, and a trim, 14-lb. weight, the
IR2925B 1" Impactool will ease the burden of exhausting steel erection, bridge
maintenance, power generation and
petrochemical applications.
Although it weighs approximately 30%
less than the lightest competitor, the
IR2925B generates an incredible 1700 ft.lbs. of torque in reverse, thanks to a compact, efficient air motor that achieves peak
torque output quicker than other tools.
Other features include the Corrode-X corrosion resistant motor, valving and airflow
components, Ingersoll-Rand’s enhanced
geometry twin-hammer mechanism, an
easy-access power management system,
and a rear air inlet that keeps the hose
in line and out of the way.
Standard dead handle allows a comfortable and
balanced grip, with even weight distribution.
Adjustable 360˚ positioning.
The IR2925B – More power – More speed
– More comfort – Less weight. Forward
bias and outside trigger models are
also available. And, the IR2925P Series
offers similar advantages in a pistol-grip
configuration.
Steel hammer case
Provides excellent durability.
The three-position power management system
is conveniently located inside the handle for
one-handed access to three levels of power in
forward, and one in reverse.
Durable, textured epoxy finish
Adds a non-slip grip and premium
appearance to the cast aluminum housing
and rear handle.
Ergonomically-designed handle
Provides a comfortable, secure grip and
excellent control. Designed specifically
for tough, industrial applications.
Enhanced twin-hammer
impact mechanism
(patented design)
Ingersoll-Rand® introduced the
original twin-hammer impact mechanism,
and we’ve continually refined it for smooth,
efficient power delivery and long life. Only four
moving parts.
Corrode-X™ component package
Protects motor, valving, and airflow components
from airborne atmosphere contaminants to
keep the tool running under the most adverse
conditions.
Reverse bias 7-vane high-output air motor
High efficiency motor quickly delivers a
maximum torque of 1700 ft. - lbs. in reverse.
Throughbolt design
Facilitates fast, easy maintenance; eliminates
sharp edges and protrusions on the housing.
Bottom exhaust with muffler
45° angle directs air safely away from the
operator and the work.
Three-position power management system
Conveniently located inside handle for one-handed access to three levels of power in forward
mode, one in reverse.
Universal grease
fitting
Offers quick, easy
maintenance
(Shown on other side)
1/2" swivel air inlet
Large capacity, improves
air flow, increases power,
and eliminates twisting for
greater maneuverability.
7
IR2925P
A new generation of Impactools
Internal features include:
The unique features of the 2925 Series
extend to pistol grip configurations in the
2925P Models. They offer an unmatched
combination of performance and control,
with the durability to withstand the toughest operating conditions.
1 Enhanced twin-hammer impact
mechanism
External features include:
• Ergonomic handle design
• Smooth contoured profile with integral
grip ledge
• Three-piece housing
• Handle exhaust
• 360˚ swivel air inlet
• Contoured trigger
• Minimum side-to-center distance
• Enhanced pressure-feed lubrication
system
• Low profile reverse lever
• Three-position power regulation
and forward/reverse control
Position #1 = Full
#2 = Approx. 88%
#3 = Approx. 77%
9
3
6
4
1
2 Supermotor™
2
1
8
3 Through-bolt construction
4 Corrode-X™ (Components
completely impervious to corrosive
contaminants)
5 Tilt throttle
7
5
6 Reverse or forward bias
7 Concentric cylinder design
8 Composite vanes
9 Balanced horizontal suspension
bail (opt.)
10 Piped-away exhaust (opt.)
10
IR2161
The IR2161 models
The IR2161 heavy duty models are ideal
for applications a little less demanding
than those for the IR2925.
Features that distinguish the IR2161 from
the IR2925 models include:
• Enhanced single-hammer mechanism
• Contoured trigger
• Minimum side-to-center distance
• Enhanced pressure-feed lubrication
system
• Three-position power regulation and
forward/reverse control
Position #1 = Full
#2 = Approx. 88%
#3 = Approx. 77%
• Ribbed lever surface
Internal features include:
• Maximum torque of 1250 ft.-lbs.
• Smooth, high-gloss cast aluminum finish
• 6-Vane high-output air motor
• Smooth, contoured exterior profile
External features include:
• Ergonomic handle design
• Smooth contoured profile
• Three-piece housing
• Handle exhaust
• 360˚ swivel air inlet
8
• An enhancement to the original singlehammer mechanism provides increased
durability and performance (patent
applied for)
• 6-Vane high-output air motor
• Through-bolt construction
• 360˚ swivel air inlet
• Tilt throttle
• Concentric cylinder design
• Balanced horizontal suspension bail
(opt.)
• Piped-away exhaust (opt.)
5/8" and 3/4" Class Impactools
◆ 2925B2
Features
Models 2161P, 2171P
• Conventional cast aluminum finish
• Full contoured housing shape
• Ergonomically-designed handle
• 360˚ swivel inlet
• Handle exhaust
• Enhanced single-hammer impact
mechanism
• 6-Vane high-output air motor
Series 2908
• Durable epoxy-coated motor
housing and handle
• Plated steel hammer case
• Twin-hammer impact mechanism
• Pressure-feed impact mechanism
lubrication
Series 2920B
• Muffled exhaust reduces operator fatigue
• Slip fit motor for easy maintenance
• Tilt throttle on pistol models for
maximum control
• Two-piece motor housing on pistol
models
• Durable epoxy-coated motor housing
and handle
• Plated steel hammer case
• Twin-hammer impact mechanism
• Pressure-feed impact mechanism
lubrication
Series 2925
• Integral grip ledge
• Three-piece housing
• Handle exhaust
• Minimum side to center distance
• Three position power regulation
• Forward/reverse control
• Enhanced twin-hammer impact
mechanism
• 7-Vane high-output air motor
• Corrode-X™
Series 2925B
• 1/2" swivel air inlet
• Enhanced twin-hammer impact
mechanism
■ 2925P1
• Corrode-X™ component package
• Reverse bias 7-vane high-output
air motor
• Throughbolt design
• 45˚ bottom exhaust with muffler
• Three-position power management
system
• Universal grease fitting
• Steel hammer case
• Durable, textured epoxy finish
• Ergonomically-designed handle
Standard Equipment
Models 2161P, 2171P
• 3⁄8" NPT inlet
• Steel hammer case
• Integral muffler
• Built-in power regulator
• Through-hole socket retainer
Series 2908
• 3⁄8" NPT Inlet
• Pin-type socket retainer
• Steel hammer case
• Integral muffler
• Built-in lubricator
• Built-in power regulator
Series 2925
• 3⁄8" NPT Inlet
• Steel hammer case
• Integral muffler
• Built-in power regulator
• Through-hole socket retainer
Series 2920B
• 3⁄8" NPT inlet
• Steel hammer case
• Integral muffler
• Built-in lubricator
• 90° Angle drive
(Model 2920B9 only)
• 2920B3 includes 834–48
straight handle
• 2920B9 includes spade
handle T15-41
Series 1720
• 3⁄8" NPT inlet
• Steel hammer case
• B3 model: Inside
throttle and dead handle
Equipment at Extra Price
Models 2161P, 2171P
• Piped-away exhaust kit
No. 2161-123
• Horizontal suspension bail
No. 2161-366
• Boot 2161-P32
Series 2908
• Vertical hanger No. 2908–365
Series 2925
• Piped-away exhaust kit
No. 2161-123
• Horizontal suspension bail
No. 2161-366
• Number 4 spline anvil
No. 2910-A526
Series 2920B
• 2910B–726–6: 6" extended
3⁄4" anvil
• Horizontal hanger No. 910–366
• 5⁄8" hex quick change anvil
No. 2910B–A926–10
Series 2920B
• Power regulator valve kit
No. 2920–K32
Series 1720
• 3⁄4" drive x 6" (152 mm)
hog ring style
• Extended anvil No. 265-A626-6
• Horizontal hanger No. 910-366
• Power regulator Kit No. 2920-K329
• Reverse valve Kit No. 1720-K329
• Dead handle 834-48
• Dead handle bracket 2910B-364
(Please turn page for specifications)
9
5/8" and 3/4" Class Impactools
Model
Drive
Description
Free
Handle Speed
rpm
Impacts
per
minute
Maximum
Torque
ft.-lb. Nm
Recomm.
Torque
Range
ft.-lb.
Nm
Weight,
less socket
lb.
kg
Side to
Center Size Hose
Distance Recomm. CFM
in. mm in. mm
Length,
less socket
in.
mm
Super Duty Impactools
2925P1
3/4"
square
2925P3 1" square
2925RBP1
3/4"
square
Reverse Bias
Pistol
5200
1050
1450
1972
350-1100 476-1496
117/8
5.39
87/8
225
13/4
44
1/2
13
60
Pistol
5200
1050
1450
1972
350-1100 476-1496
117/8
5.39
87/8
225
13/4
44
1/2
13
60
2176
1768
400-1400 544-1904
300-950 408-1292
117/8
5.39
87/8
225
13/4
44
1/2
13
60
Pistol
5200
Grip
I.T.
6500
900
1600
2170
350-1400 475-1904
14
6.35
123/8
314
15/8
41
11⁄2 13
60
Grip
I.T.
6500
900
1700
1500
2305 F300-1300 407-1763
2034 R400-1500 544-2034
14
6.35
123/8
314
15/8
41
11/2 13
60
Grip
O.T.
6500
900
1600
2170
350-1400 475-1904
14
6.35
123/8
314
15/8
41
11/2 13
60
2925RA2 1" square
Reverse Bias
Grip
O.T.
6500
900
1700
1500
2305 F300-1300 407-1763
2034 R400-1500 544-1904
14
6.35
123/8
314
15/8
41
11/2 13
60
2925RBP3 1" square
Reverse Bias
Pistol
5200
117/8
5.39
87/8
225
13/4
44
1/2
13
60
Grip
5000
1495
250-800 339-1085 133/16
5.98
121/2
318 129/32
49
1/2
13
36
133/16
5.98
121/2
318
129/32
49
1/2
13
36
203-678 2311/16 10.75
171/2
445
†
33
1/2
13
36
2925B2 1" square
2925RB2 1" square
Reverse Bias
2925A2 1" square
2920B1
3/4"
square
2920B3 1" square
1050 1600 R
1300 F
1050 1600 R
1300 F
950
1100
2176
1768
Grip
5000
950
1100
1495
sq. at 90° Grip
5000
950
550
949
400-1400 544-1904
300-950 408-1292
250-800 339-1085
◆ 2920B9
3/4"
2908P2
3/4"
square
Pistol
6000
1050
750
1017
100-450
2908P1
5/8"
square
Pistol
6000
1050
750
1017
100-450
Pistol
5750
1025
1250
1700
125-400
136-610
811/16
136-610
81/2
250-900 340-1224
111/4
15/16
†
3.94
711/16
195
15/8
41
1/2
13
31
3.86
711/16
195
15/8
41
1/2
13
31
5.10
81/2
216
13/4
44
1/2
13
55
5.10
81/2
216
13/4
44
1/2
13
55
5.39
75/8
194 129/32
48
1/2
13
40
129/32
Heavy Duty Impactools
2161P
2171P
3/4"
square
1" square
1720P1 3/4" square
Pistol
5750
1025
1250
1700
250-900 340-1224
111/4
Pistol
5500
1000
1000
1360
200-600
271-813
117/8
117/8
1720P3 1" square
Pistol
5500
1000
1100
1490
250-750 340-1016
5.39
75/8
48
1/2
13
40
1720B1 3/4" square
Grip
5500
1000
1000
1360
200-600
271-813 133/16
6.27
113/4
299 129/32
48
1/2
13
40
1720B3 1" square
Grip
5500
1000
1100
1490
250-750 340-1016 133/16
6.27
113/4
299 129/32
48
1/2
13
40
Note: IR2925 number 4 spline models are available by converting the standard square drive anvil with number 4 spline anvil part number 2910-A526.
The same performance figures apply.
Models 2908P1 and 2908P2 Impactools furnished with pin-type retainer.
Performance figures are at 90 psi (620 kPa) air pressure.
Angle head gear ratio on model 2920B9 is 2 to 1.
† Side to center distance of angle head. Height of angle head to shoulder of square drive is 3 1⁄ 2" (89 mm).
**2920B9 Hammer Case is plated ductile iron.
◆ Approx. 50% torque reduction.
I.T.: Inside Throttle
O.T.: Outside Throttle
10
194
1"-31⁄2" Class Impactools
You’ll master the toughest challenges
with IR’s 1-inch to 31⁄2-inch Class
Impactools. Designed for high volume
production or heavy maintenance
and construction applications,
these models incorporate the finest
materials and most precise tolerances.
IR has combined almost seventy years
of Impactool expertise and the finest
materials around to produce the best
Impactools the industry has to offer.
11
1" Class Impactools
81⁄4
4
33⁄4
● 2934B9
1
▲ 2934P2
Features
Standard Equipment
• 1" square drive or No. 5 spline models
• Plated ductile iron hammer case and
durable epoxy-coated motor housing
and handle
• Twin-hammers mean more
power per pound
• Pressure-feed impact mechanism
lubrication
• Two-piece motor housing
Model 1734A1
• 1⁄ 2" NPT inlet
• Plated hammer case
Standard Equipment
Series 1734
• No. 5 spline 280-A514-6
• *6" square anvil: 280–726-6
• Hanger: 2934–366
• Exhaust deflector kit: 2934-K23
• Piped-away exhaust with muffler:
2940-KM184
• Piped-away exhaust without muffler:
2940-K184
Series 1712
• 1⁄ 2" NPT inlet
• Ductile iron hammer case
• B2 model: Inside throttle and spade style
dead handle
Equipment at Extra Price
Series 2934
• 1⁄ 2" NPT inlet
• Plated cast iron hammer case
• Dead straight handle
(A & B models only)
• Spade style dead handle
(B9 & P2 models only)
• Integral muffler
• Built-in power regulator
(P2 model only)
• 90° Angle drive
(Model 2934B9 only)
Model
Drive
Description Handle
• Piped-away exhaust muffler kit
No. 2940–KM184. (A & B models only)
Series 2934
• 90° Angle drive is available
for all square drive models.
• Order angle attachment No. 2934A90
Free
Speed
rpm
Impacts
per
minute
Maximum
Torque
ft.-lb. Nm
Recomm.
Torque
Range
ft.-lb.
Nm
and hex nose hammer case No.
2934–A827. This hammer case must be
used to replace the standard hammer
case. Note that these items are furnished
as standard equipment on Model
2934B9
• *1" drive x 6" (152 mm) extended anvil
No. 2934–314–6
• Horizontal hanger consisting of:
– One horizontal hanger
No. 2934–366
– Two hanger spacers
No. 2934–140
Series 1712
• *1" drive x 6" (152 mm) extended anvil
No. 280–726–6
• 2934–366 horizontal hanger
Weight,
less socket
lb.
kg
Length,
less socket
in.
mm
2030 500-1100 678-1490
181/2
8.39
111/4
Side to
Center Size Hose
Distance Recomm. CFM
in. mm in. mm
Super Duty Impactools
2934A2
1" square
Grip O.T. 6600
750
1500
2934B1** No. 5 spline Grip I.T. 6600
750
1500
2030 500-1100 678-1490
181/2
2934B2
750
1500
2030 500-1100 678-1490
181/2
1624
1" square
Grip I.T. 6600
286
23/16
56
3/4
8.39
111/4
19
47
286
23/16
56
3/4
8.39
111/4
19
47
286
23/16
56
3/4
19
47
● 2934B9
1" sq. at 90° Grip I.T. 5300
780
750
250-500 678-1355
353/4
16.2
185/8
473
†
41
3/4
19
47
▲ 2934P2
1" square
5300
825
1500
2030 500-1100 678-1490
20
9.07
85/8
219
23/16
56
3/4
19
47
1734A1** No. 5 spline Grip O.T. 6000
800
1400
1904 450-1000 612-1860
183/8
8.34
111/4
286
23/16
56
3/4
19
47
8.28
111/4
286
23/16
56
3/4
19
47
8.28
111/4
286
23/16
56
3/4
19
56
Pistol
15/8
†
Heavy Duty Impactools
1712B2
1" square
Grip I.T. 6000
800
1350
1836 450-1000 612-1860
181/4
1712P2
1" square
Pistol
800
1350
1836 450-1000 612-1860
181/4
6000
*Approx. 15% torque reduction.
Performance figures are at 90 psi (620 kPa) air pressure.
Angle head gear ratio on model 2934B9 B is 1 to 1.
12
5
**No. 5 spline 1 ⁄ 8" OD 14 teeth.
† Side to center distance of angle head. Height of angle head to shoulder of square drive is 4 3⁄8" (111 mm).
I.T.: Inside Trigger
O.T.: Outside Trigger
▲ 2940P2
● 2940B1
Features
Standard Equipment
Equipment at Extra Price
• Choice of 1" square drive or
No. 5 spline
• Plated ductile iron hammer case
and durable epoxy-coated motor
housing and handle
• Twin-hammers mean more power
per pound
• Two-piece motor housing
Series 2940
• 1⁄ 2" NPT inlet
• Plated cast iron hammer case
• Integral muffler
• Built-in lubricator
• Straight dead handle
(A & B models only)
• Spade style dead handle
(P2 Model only)
• Integral power regulator
(P2 Model only)
Series 2940
• Piped-away exhaust muffler kit
No. 2940–KM184 (A & B models only)
• Horizontal hanger consisting of
– One horizontal hanger
No. 2934–366
– Two hanger spacers
No. 2934–140
–*1" drive x 6" (152 mm) extended anvil
No. 2940–314–6
Model
Drive
Description Handle
Free
Speed
rpm
Impacts
per
minute
Maximum
Torque
ft.-lb. Nm
Recomm.
Torque
Range
ft.-lb.
Nm
Weight,
less socket
lb.
kg
Length,
less socket
in.
mm
Side to
Center Size Hose
Distance Recomm. CFM
in. mm in. mm
Super Duty Impactools
2940A1** No. 5 spline Grip O.T. 5000
850
2000 2710 1000-1600 1360-2170
22
9.98
121/4
311
23/16
56
3/4
19
58
2940A2
850
2000 2710 1000-1600 1360-2170
22
9.98
121/4
311
23/16
56
3/4
19
58
311
23/16
56
3/4
19
58
311
23/16
56
3/4
19
58
251
23/16
56
3/4
19
58
1" square
Grip O.T. 5000
● 2940B1** No. 5 spline Grip I.T. 5000
2940B2
▲ 2940P2
1" square
1" square
Grip I.T. 5000
Pistol
4000
850
2000 2710 1000-1600 1360-2170
22
9.98
121/4
850
2000 2710 1000-1600 1360-2170
22
9.98
121/4
2000 2710 1000-1600 1360-2170
227/8
10.4
97/8
810
*Approx. 15% torque reduction.
**No. 5 spline 1 5⁄ 8" OD 14 teeth.
Performance figures are at 90 psi (620 kPa) air pressure.
O.T.: Outside Trigger
I.T.: Inside Trigger
13
11⁄ 2" Class Impactools
● 2950B7
▲ 5980A1
Features
Standard Equipment
Series 2945 and 2950
• Twin-hammers mean more power
per pound
• Direct drive for fast rundown
• Durable epoxy-coated motor
housing
• Plated ductile iron hammer case
• Pressure-feed impact mechanism
lubrication
• Two-piece motor housing
Series 2945
• 1⁄ 2" NPT inlet
• Straight dead handle
• Plated hammer case
• Built-in lubricator
• Integral muffler
Model
Series 2945 and 2950
• Piped-away exhaust muffler kit
No. 2940–KM184
• Horizontal hanger kit No. 2950–K366
Series 2950
• 1⁄ 2" NPT inlet
• Straight dead handle
• Plated hammer case
• Built-in lubricator
• Integral muffler
Model 5980A1
• Precision ball and cam impact
mechanism
Drive
Description Handle
Equipment at Extra Price
Series 5980A1 and 5982A1
• Dual grip handle No. 5980–48
Model 5980A1
• 3⁄4" NPT inlet
• Aluminum hammer case
• Built-in lubricator
• Horizontal eyebolt
• Vertical eyebolt
Free
Speed
rpm
Impacts
per
minute
Maximum
Torque
ft.-lb. Nm
Recomm.
Torque
Range
ft.-lb.
Nm
Weight,
less socket
lb.
kg
Length,
less socket
in.
mm
Side to
Center Size Hose
Distance Recomm. CFM
in. mm in. mm
Super Duty Impactools
2945A7 11/2" square Grip–O.T. 4000
650
2400
3264 1400-1800 1900-2440
30
13.6
133/4
349
21/2
64
3/4
19
65
2945B1* No. 5 spline Grip–I.T.
650
2400
3264 1400-1800 1900-2440
30
13.6
133/4
349
21/2
64
3/4
19
65
349
21/2
64
3/4
19
65
368
21/2
64
3/4
19
70
19
70
19
70
1 25
138
2945B7
11/2"
square Grip–I.T.
4000
4000
650
2400
3264 1400-1800 1900-2440
30
13.6
133/4
2950A7 11/2" square Grip–O.T. 3750
650
3000
4080 1600-2500 2170-3390 325/8
14.8
141/2
325/8
14.8
141/2
368
21/2
64
3/4
14.8
141/2
368
21/2
64
3/4
584
31/16
78
2950B1 No. 5 spline Grip–I.T.
3750
650
3000
4080 1600-2500 2170-3390
● 2950B7 11/2" square Grip–I.T.
3750
650
3000
4080 1600-2500 2170-3390 325/8
▲ 5980A1
11/2"
square Lever
830
Performance figures are at 90 psi (620 kPa) air pressure.
*No. 5 spline 1 5⁄8" OD 14 teeth.
14
1000 10,000 13,560 2300-5500 3119-7460
O.T.: Outside Trigger
I.T.: Inside Trigger
88
39.9
23
21⁄2" to 31⁄2" Class Impactools
▲ 599A1
● 588A1
Features
Standard Equipment
• Faster removal and tightening
of large (4" [102 mm] and larger)
fasteners
• Precision ball and cam impact
mechanism
• Portable, easy to handle or suspend
• Model 599A1 is the most powerful
Impactool in the world
Model 5982A1
• Lever throttle
• 3⁄4" NPT inlet
• Aluminum hammer case
• Side exhaust
• Dead handle
• Horizontal eyebolt
• Vertical eyebolt
Model 599A1
• Lever throttle
• 11⁄4" NPT inlet
• Cast iron hammer case
• Dead handle
• Built-in lubricator
• Horizontal eyebolt
• Vertical eyebolt
Model 588A1
• Lever throttle
• 1" NPT inlet
• Cast iron hammer case
• Dead handle
• Built-in lubricator
• Horizontal eyebolt
• Vertical hanger
Model
Impacts
Drive
Free
per
Maximum
Description Handle Speed minute
Torque
rpm
ft.-lb.
Nm
Equipment at Extra Price
Model 5982A1
• Horizontal hanger
ILA582A1-D366
Recomm.
Torque
Range
ft.-lb.
Nm
Weight,
Length,
less socket less socket
lb.
kg
in. mm
Side to
Center Size Hose
Distance Recomm. CFM
in. mm in. mm
Super Duty Impactools
5982A1 21/2" square
Lever
830
850
20,000
27,120
4000-10,000
5424-13,560 120
54.5 253/8
645
31/2
89
1 25 130
101
1 25 155
● 588A1
21/2" square
Lever
355
550
50,000
67,800 12,000-25,000 16,270-33,900 215
97.5 265/8
676
4
▲ 599A1
31/2" square
Lever
295
500
80,000 108,500 26,000-42,000 35,250-57,000 599
272 371/2
952
63/4
171 11/2 38 375
Performance figures are at 90 psi (620 kPa) air pressure.
15
Impactool Selection Guide
This chart will assist you in recommending a particular Impactool for a specific application. The figures used are based on 70% of the
tension proof load of a given size and grade bolt. For example, a Grade 5 bolt has a proof load of 94,200 psi (649,509 kPa). A 1⁄ 2"-13
UNC Grade 5 bolt has a tensile stress area — the cross section at the root of the thread — of 0.1282 in.2 (82.7 mm2). So therefore it
has an actual proof load of 12,076 lbs. (53,715 newtons). 70% of this proof load is 8453 lbs. (14,523 newtons). By looking at the chart,
we find that in order to put 8450 lbs. (37,586 newtons) of tension on the 1⁄ 2" (13 mm) UNC Grade 5 bolt, we must apply 70 ft.-lbs.
(94.9 Nm) torque. To do this, we recommend the Series 2906 Impactool.
It should be remembered that 70% of the proof load is normally the amount of tension needed to assure a properly tightened joint.
Bolt Grade
Grade 1
Grade 5
ASTM-A325
Bolt Diameter, in.
Bolt Diameter, mm
1/4
5/16
11
1/2
13
9/16
8
3/8
10
7/16
6
14
5/8
16
3/4
19
7/8
22
1
25
11/8
29
11/4
32
Hex Size,
Inches
Max.
Min.
1/2
3/8
19/32
11/16
25/32
7/8
15/32
9/16
21/32
3/4
31/32
27/32
11/16
15/16
11/4
11/8
17/16
15/16
15/8
11/2
113/16
111/16
2
17/8
Torque
ft.-lbs.
Nm
3
4.07
6
8.14
11
14.9
18
24.4
28
38
43
58.3
55
74.6
97
132
155
210
230
312
340
461
480
651
Impactool
Recommended
2902
2902
2902
2903
2903
2903
2906
2908
2903
2908
2906
2925
2906
2925
2934
Tension
lbs.
kN
730
3.24
1,210
5.38
1,800
8.01
2,460
10.9
3,280
14.6
4,200
18.7
5,200
23.1
7,000
31.1
10,600
47.1
14,000
62.3
18,200
80.9
23,000
102
Torque
ft.-lbs.
Nm
8
10.8
16
21.7
28
38
46
62.4
70
95
110
149
140
190
250
339
405
549
600
814
770
1,044
1,080
1,464
Impactool
Recommended
2902
2904
2902
2904
2902
2904
2903
2904
2906
2906
2903
2908
2925
2906
2925
2908
2934
1734
2934
1734
2940
Tension
lbs.
kN
1,900
8.4
3,100
13.8
4,600
20.4
6,350
28.2
8,450
37.6
10,900
48.5
13,500
60
20,000
89
27,400
122
36,000
160
41,000
182
52,000
231
Torque
ft.-lbs.
Nm
200
271
355
481
570
773
850
1,153
1,060
1,437
1,495
2,027
2925
2934
2908
2934
2925
2934
1734
2940
1734
2945
19,000
44.5
28,000
124
39,000
173
51,000
227
56,000
249
71,000
316
Impactool
Recommended
Grade BB
ASTM-A354
Tension
lbs.
kN
Torque
ft.-lbs.
Nm
8
10.8
15
20.3
27
36.6
43
58.3
66
89.5
106
144
131
178
234
317
376
510
565
766
830
1,125
1,170
1,586
Impactool
Recommended
2902
2904
2902
2904
2902
2904
2903
2904
2903
2906
2908
2925
2906
2925
2908
2934
2934
2925
2940
1734
Tension
lbs.
kN
1,780
7.9
2,930
13
4,340
19.3
5,950
26.5
7,950
35.4
10,190
45.3
12,660
56.3
18,700
83.1
25,870
115
33,940
151
44,240
196
56,000
249
Torque
ft.-lbs.
Nm
10
13.6
20
27.1
35
47.5
56
75.9
86
117
138
187
173
234
306
415
495
671
742
1,006
1,090
1,478
1,530
2,075
Impactool
Recommended
2902
2904
2902
2904
2903
2904
2906
2904
2906
2904
2906
2904
2908
2925
2906
2934
2934
2925
2940
1734
2945
Tension
lbs.
kN
2,340
10.4
3,850
17.1
5,700
25.3
7,815
34.8
10,430
46.4
13,380
59.5
16,610
74
24,550
109
33,960
151
44,550
198
58,070
258
73,500
327
Grade 8
ASTM-A354
Torque
ft.-lbs.
Nm
11
14.9
23
31.2
40
54.2
65
88.1
99
134
159
216
198
268
350
475
566
767
848
1,150
1,245
1,688
1,750
2,373
Grade BD
Impactool
Recommended
2902
2904
2902
2904
2903
2904
2903
2904
2906
2904
2906
2908
2925
2934
2934
2925
2940
1734
2950
Tension
lbs.
kN
2,740
12.2
4,400
19.6
6,510
28.9
8,930
39.7
11,920
53
15,290
68
18,980
84.4
28,050
125
38,800
172
50,900
226
66,360
295
84,000
374
Torque
ft.-lbs.
Nm
250
339
435
590
715
970
1,070
1,451
1,580
2,142
2,125
2,882
2925
2934
2934
2925
2940
1734
2945
2950
24,000
107
35,000
156
49,000
218
64,000
285
Grade BC
ASTM-A354
ASTM-A490
Impactool
Recommended
Tension
16
lbs.
kN
80,000 102,000
356
454
Only certain Impactools are shown in this chart. Compare the required torque shown in this chart with torque range figures shown in the
Impactool specifications tables to select other suitable tools.
Bolt Grade
Grade 1
Bolt Diameter, in.
Bolt Diameter, mm
13/8
35
11/2
38
15/8
41
13/4
44
2
51
21/4
57
21/2
64
23/4
70
3
76
31/4
83
31/2
89
33/4
95
4
102
Hex Size,
Inches
Max.
Min.
23/16
21/8
23/8
21/4
29/16
27/16
23/4
25/8
31/8
3
33/8
31/2
37/8
33/4
41/4
41/8
45/8
41/2
5
47/8
53/8
51/4
53/4
55/8
61/8
6
Torque
ft.-lbs.
Nm
660
895
860
1,166
2934
1734
2940
Impactool
Recommended
Grade 5
Tension
lbs.
kN
Torque
ft.-lbs.
Nm
Impactool
Recommended
ASTM-A325
Tension
lbs.
kN
Torque
ft.-lbs.
Nm
Impactool
Recommended
Grade BB
ASTM-A354
Tension
lbs.
kN
Torque
ft.-lbs.
Nm
Impactool
Recommended
Grade BC
ASTM-A354
Tension
lbs.
kN
Torque
ft.-lbs.
Nm
Impactool
Recommended
Tension
lbs.
kN
Grade 8
ASTM-A354
Torque
ft.-lbs.
Nm
Grade BD
Impactool
Recommended
ASTM-A490
Tension
lbs.
kN
Torque
ft.-lbs.
Nm
Impactool
Recommended
Tension
lbs.
kN
28,400 34,600
126
154
1,470
1,933
1,950
2,644
2945
2950
64,000 77,000
285
342
1,960
2,658
2,600
3,526
2950
5980
These bolts are used on structural steel applications. Torque and tension values are based on running the nut beyond the
proof load of the bolt by the turn of the nut method. For detailed information consult the bolt manufacturer.
85,000 103,000
378
458
1,580
2,142
2,080
2,820
2,700
3,661
3,400
4,610
5,150
6,983
7,500
10,170
10,300
13,967
13,100
17,764
17,100
23,188
21,800
29,561
2945
2950
5980
5980
5982
5982
5980
588
588
588
599
69,050 83,550
307
371
27,500 34,000
37,290 46,104
599
599
41,300
56,003
599
99,680 116,480 155,120 199,360 248,640 285,080 341,780 403,725 470,400 542,850 620,025
443
518
690
887
1,106
1,268
1,520
1,796
2,092 2,414
2,758
2,075
2,814
2,440
3,309
3,545
4,807
4,465
6,054
6,785
9,200
9,815
13,309
13,600
18,442
16,550
22,442
21,645
29,351
27,700
37,561
2950
5980
5980
5980
5982
5982
588
588
588
599
34,760 42,980
47,134 58,281
599
599
52,360
71,000
599
90,630 109,620 130,830 152,880 203,950 261,660 326,340 361,100 432,910 517,690 595,840 687,610 787,370
403
488
582
680
907
1,164
1,452
1,606
1,926
2,303
2,650 3,058
3,493
2,375
3,220
3,135
4,251
2950
5980
103,570 125,330
461
557
2,780
3,770
3,700
5,017
5980
5980
2950
These bolts are used on structural steel applications. Torque and tension values are based on running the nut beyond the
proof load of the bolt by the turn of the nut method. For detailed information consult the bolt manufacturer.
121,000 148,000
538
658
17
Torque Control Impactools
IR Torque Control Impactools are
designed for applications requiring
fastener tightening control. The tools
shut off automatically when preset
torque levels are reached. Depending
upon the model, built-in or detachable
torsion bars sense torque levels, and
signal a mechanical shut-off device
to prevent over-torquing. These tools
combine a ball and cam impact mechanism with a heavy-walled aluminum
hammer case for maximum strength,
minimum weight.
18
Torque Range: 6-90 ft.-lb., 8-122 Nm
Torque Control Impactools
● 5020TAL1
Equipment at Extra Price
Series 5020T and Model 5020TDQ
• Torque setting clamp No. 5020T–951
(for Series 5020T only)
• Horizontal hanger:
– One horizontal hanger No. 5020–366
– includes spacers & screws
– Two horizontal hanger spacers
No. 504–140
– Two horizontal hanger cap screws
No. 504–376A
• Vertical hanger No. 5020–365
Model
Drive
Description
★ 5040TDQ
Series 5040T and Model 5040TDQ
• Vise-type torque setting jig
No. 5040T–A951 (for Series
5040T only)
• Horizontal hanger:
– One horizontal hanger No. 5040–366.
Includes the following; Two horizontal
hanger spacers No. 504–140 and
two horizontal hanger cap screws
No. 504–376A
• Vertical hanger No. 5040–365
Torque
Range
ft.-lb.
Nm
Type
Torsion
Bar
Free
Speed
rpm
Impacts
per
minute
▲ 5040TAL1
Weight
lb.
Length
kg
in.
mm
Side to
Center
Distance CFM
in.
mm
● 5020TAL1
3/8"
square
6-17
8-23
AB
1400
2100
4
1.81
9
229
11/16
27
10
5020TAH1
3/8"
square
10-30
13-40
AB
1400
2100
4
1.81
9
229
11/16
27
10
5020TDQ
7/16"
1.9
11
279
11/16
27
10
2.84
101/2
267
13/8
35
15
267
13/8
35
15
267
13/8
35
15
349
13/8
35
15
▲ 5040TAL1
1/2"
hex Q.C.
square
10-30
13-40
NAD
1400
2100
43/16
20-45
27-61
AB
1500
2150
61/4
2.84
101/2
2.84
101/2
3.12
133/4
5040TAM1
1/2"
square
40-65
54-88
AB
1500
2150
61/4
5040TAH1
1/2"
square
60-90
81-122
AB
1500
2150
61/4
2150
67/8
★ 5040TDQ
7/16"
hex Q.C.
20-90
27-122
NAD
1500
All of the above square drive Impactools are furnished with pin-type retainer.
Series 5020 and 5040 Impactools have 1⁄4" NPT air inlet: 1⁄4" (6 mm) size hose is recommended.
Weights shown are with torsion bar, less socket. Weights of models with detachable torsion bars
are with heaviest torsion bars. Lengths shown are with torsion bar, less socket.
Performance figures are at 90 psi (620 kPa) air pressure.
Models ending in L1 are equipped with light torsion bar.
AB = Adjustable, Built-in torsion bar. NAD = Non-adjustable, Detachable torsion bar.
Models ending in M1 are equipped with medium torsion bar.
Models ending in H1 are equipped with heavy torsion bar.
19
Torque Control Impactools
Non-adjustable Detachable Torsion Bars and
Kits for Models 5020TDQ and 5040TDQ
• No. 5040TDQ–KP637 torsion bar kit
(consists of one each non-adjustable
torsion bar with pin-type retainer and
No. 5040TDQ–637 torsion bar case)
Torsion Bar Number
With 1⁄2" Square Drive
With 1⁄2" Square Drive
Pin-Type Retainer
Ball-Type Retainer
• No. 5040TDQ–KB637 torsion bar kit
(consists of one each non-adjustable
torsion bar with ball-type retainer and
No. 5040TDQ–637 torsion bar case)
Model 5020TDQ
Torque Range
ft.-lb.
Nm
Model 5040TDQ
Torque Range
ft.-lb.
Nm
Color
Code
5040TDQ–P535–1
5040TDQ–B535–1
6-10
8.14-13.6
20-25
27.1-33.9
Red
5040TDQ–P535–2
5040TDQ–B535–2
8-12
10.8-16.3
22-30
29.8-40.7
Orange
5040TDQ–P535–3
5040TDQ–B535–3
10-14
13.6-19
25-35
33.9-47.5
Yellow
5040TDQ–P535–4
5040TDQ–B535–4
12-16
16.3-21.7
30-40
40.7-54.2
Green
5040TDQ–P535–5
5040TDQ–B535–5
14-18
19-24.4
35-45
47.5-61.0
Blue
5040TDQ–P535–6
5040TDQ–B535–6
16-20
16.3-27.1
40-50
54.2-67.8
Violet
5040TDQ–P535–7
5040TDQ–B535–7
18-22
24.4-29.8
45-55
61.0-74.6
Red
5040TDQ–P535–8
5040TDQ–B535–8
20-24
27.1-32.5
50-60
67.8-81.4
Orange
5040TDQ–P535–9
5040TDQ–B535–9
22-26
29.8-35.2
55-65
74.6-88.1
Yellow
5040TDQ–P535–10
5040TDQ–B535–10
24-28
32.5-38
60-75
81.3-101
Green
5040TDQ–P535–11
5040TDQ–B535–11
26-29
35.2-39.3
70-85
94.9-115
Violet
5040TDQ–P535–12
5040TDQ–B535–12
27-30
36.6-40.7
75-90
102-122
Blue
Torque Control Impactool Operation
The Torque Control Impactool converts
the torque of the air motor into powerful
rotary impacts when a certain resistance
to turning is met. The Ingersoll-Rand
principle of compressing a sturdy hammer
spring and suddenly releasing this energy
to strike a powerful rotary blow makes
it possible to quickly and efficiently run
fasteners.
The Torque Control Impactool also incorporates a torsion bar and an automatic
shut-off valve. Torque control is obtained
by preloading the torsion bar to the
torque desired. When the resistance of
the fastener being run becomes equal
to the torque preloaded in the torsion bar,
the extra clearance in the flutes of the
locking collar allows the torsion bar to flex
a few degrees beyond its original setting.
Ball and cam mechanism converts air motor
torque into powerful rotary impacts.
Acting like a spring, the torsion bar snaps
back, supplying additional impetus to the
hammer, causing the hammer to rebound
higher and trip the automatic shut-off
valve, instantly stopping the tool. By
varying the setting of the torsion bar, using
different torsion bars and/or different size
tools, torques from 6 to 90 ft.-lbs. (8.14 to
122 Nm) can be accurately obtained time
after time.
Planetary gear drive delivers smooth
constant speed from motor.
Tough steel anvil transfers blows from
impact hammer to the fastener.
Adjustable torsion bar signals
shutoff device when preset
torque is reached.
Automatic shutoff stops tool
when preset torque is reached.
Calibrated locking collar holds torsion
bar in preloaded condition.
20
High-strength aluminum alloy hammer case
protects internal impact mechanism parts.
Electric Impactools
For applications where the use of
compressed air is not practical,
IR offers a complete line of electric
Impactools in 3⁄8, 1⁄ 2, 3 ⁄4 and 1-inch
drive sizes. All models are ranked
according to the Super Duty/Heavy
Duty/Standard Duty ratings, and
incorporate the same high quality
of design and construction that has
made Ingersoll-Rand the world leader
in Impactools.
21
Electric Impactools
▲ 8055
● 8005
Features
• Full ball bearing construction throughout
for maximum performance
• High quality, heat treated steel gears for
longer life
• Full power in reverse for removing bolts,
nuts, studs and lag screws
• Lightweight cast aluminum housing
and handle reduce operator fatigue
• Heavy duty 3-conductor cord –
grounding required
• Delivers high torque for maximum
efficiency
Model
Drive
Description
Free
Handle Speed
rpm
★ 8056
Impacts
per
minute
Maximum
Torque
ft.-lb. Nm
●8005
3/8"
8049
1/2"
square
Pistol
1900
2000
290
393
8053
1/2"
square
Pistol
1900
1900
330
448
8053QC
7/16"
hex QC
Pistol
1900
1900
300
407
square
Pistol
1700
1725
450
610
▲ 8055
3/4"
8062
5/8"
★8056
square
hex QC
1" square
Pistol
2000
Pistol
1700
1725
Grip
800
900
Tools comply with OSHA requirements and are UL listed.
22
2200
85
400
115
Recomm.
Torque
Range
ft.-lb.
Nm
5-50
Weight,
less
socket
lb.
Length, Side to
less
Center
socket Distance
in.
in. amps
volts
7-68
41/2
101/8
13/8
3.0
30-180
41-244
63/4
1111/16
15/8
5.0
120 AC
10'
50-225
68-305
7
101/4
15/8
5.0
120 AC/DC
15'
50-200
68-272
7
11
15/8
5.0
120 AC/DC
15'
100-375 136-509
10
117/8
13/4
7.5
120 AC/DC
8'
13/4
7.5
120 AC/DC
8'
23/8
10.0
120 AC/DC
15'
542
100-350 136-475
10
127/8
750 1017
300-600 407-814
321/2
141/8
120 AC
Chord
Length
10'
Quick Reference Guide
Drive Size
Super Duty
Series
Page
Heavy Duty
Series
Page
3/8"
2902
5
1702
5
3/8"
2903
5
2904
5
7/16"
Quick Change
7/16"
Quick Change
1/2"
Standard Duty
Series
Page
2131
2906
2705
6
1/2"
2904
6
1/2"
2131
6
5/8"
5/8"
2908
6
2707
6
6
2925
5020
19
5020
19
5040
19
5040
19
Electric
Series
Page
8005
22
8053
22
8049
22
8062
22
8055
22
8056
22
8
Quick Change
3/4"
Torque Control
Series
Page
10
3/4"
1720
10
2161P
10
1"
2934
12
1734
12
1720
10
1"
2940
13
1712
12
2171P
10
11/2"
2945
14
11/2"
2950
14
11/2"
5980
14
21/2"
5982
15
21/2"
588
15
31/2"
599
15
Pressure-Feed Lubrication System
Ingersoll-Rand uses a “pressure-feed”
lubrication system on all Twin-Hammer
and Jumbo Hammer Impact Mechanisms.
This exclusive system allows the operator
to externally inject grease into a chamber
through a grease fitting in the rear of the
motor housing.
chamber and through the rotor, distributing
a film of protective grease on the hammer
mechanism. This system insures the
continuous lubrication of critical hammer
parts, resulting in longer, trouble-free life.
Air pressure from the motor force feeds
the right amount of grease from the
Use Cat. No. R000A2-228 Metal Grease
Gun and Cat. No. 100 Grease, or equivalent. This grease has the right viscosity to
flow through the small orifice in the rotor
and anvil.
Forward:
Regulator on 3 reduces power output.
Switching to reverse automatically
maintains full power.
Reverse:
Regulator on 3 reduces power output.
Switching to forward automatically
maintains full power.
Power Regulator System
Some Twin-Hammer and Jumbo Hammer
tools are equipped with a combination
power regulator/reverse valve. This design
allows operators to adjust power output,
to prevent over-torquing on delicate work,
in one direction—while maintaining full
power in the opposite direction. The power
output in either direction is designated
by the numbers “0” thru “5”. Number 5
designates maximum power.
Regulator on 5:
Forward, maximum power output
Reverse, maximum power output
23
Sockets and Accessories
The next several pages cover
Impactool sockets and accessories,
excerpted from the Ingersoll-Rand
IRAX Accessories catalog (Form #
52225–F). These items are specifically
designed to maximize the performance
and versatility of your Impactools.
The selection presented here includes:
• Socket sets
• Power angle attachments
• Power driver extensions
• Power hex to square adapters
• Power socket adapters
• Individual sockets
• “O” rings and retaining pins
• One-piece socket retainers
• Power universal joints
• Power keyless chucks
• Power quick change chucks
24
Sockets and Accessories
Socket Sets
Part
Number
Description
72313
3/8"
drive set (5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, metal tray)
77314
3/8"
drive deep set (5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, metal tray)
72356M
3/8"
drive metric set (8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, metal tray)
77357M
3/8"
drive deep metric set (8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, metal tray)
74411
1/2"
drive set
73412
1/2"
drive deep set (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, metal tray)
74466M
1/2"
(7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16,
1,
11/16,
Power Socket Adapters
metal tray)
Part
Number
drive metric set (10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27,
metal tray)
Square Drive
Size in.
Length
Female Male
in.
Major
Diam.
in.
2U–215
3/8
1/2
15/16
5/8
3 /4
1
21/4
15/8
73467M
drive deep metric set (10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27,
metal tray)
07655
07656
1
3 /4
17/8
21/8
075608L
3/4"
drive deep set
25006
2 ⁄2
11/2
41/2
5
075609
3/4"
drive set (3/4, 13/16, 7/8, 15/16, 1, 11/16, 11/8, 13/16, 11/4, metal tray)
075610
3/4"
drive set (3/4, 13/16, 7/8, 15/16, 1, 11/16, 11/8, 13/16, 11/4, 15/16, 13/8, 17/16, 11/2)
1/2"
(7/8, 15/16,
1,
11/16,
11/8,
11/4,
15/16,
11/2)
Part
Number
Power Angle Attachments
A reduction of approximately 50% of the
torque output will be encountered.
(1)
Square Drive
Size in.
Length in.
Height Over
Amount of
Drive, in. Angle, Degrees
Weight/
Lbs.
C⁄ L
4UA9 (1)
1/2
61/4
215⁄16
90
3.0
13/32
2920A90
3 /4
7
31/2
90
8.6
123/64
2934A90
1
81/2
43/8
90
16
127/32
Angle Head gear ratio 1.333 to 1-Fits any 1⁄2 Drive Impact
Spline Drive Length
Female Male
in.
Major
Diam.
in.
09902
No.5 1" Sq.
Spline
43/8
23/8
10005
1" Sq.
41/4
21/4
No.5
Spline
Power Driver Extensions
C⁄L
Part
Number
1
Part
Number
Square Drive
Size in.
Length in.
7175P
3/8
3
7181P
1/2
5
07567
3 /4
7
10607
1
7
15097P
11/2
8
25001–10
21/2
10
Spline
Drive No.
Length in.
5
15
Part
Number
09901–15
Power Hex to Square Adapters
Part
Number
Drive
Size in.
Length
Hex Square in.
Major
Diam.
in.
7102
1/4
1/4
2
3/8
7106
1/4
3/8
4
9/16
7121
7/16
1/2
23/4
21/32
25
Sockets and Accessories
3⁄ 8" Square Drive Power Sockets
Wrench
Size in.
Part
Number
Metric–1⁄ 2" Square Drive Power Sockets
Bolt
Depth in.
Standard – Hex/6 Point
5/16
11/32
Wrench
Size mm
Part
Number
Standard – Metric/6 Point
1⁄ 2" Square Drive Power Sockets
Wrench
Size in.
Part
Number
Bolt
Depth in.
Standard – Hex/6 Point
7210H
1/2
8
7408M
3/8
7412H
7/8
7211H
1/2
9
7409M
7/16
7414H
7/8
3/8
7212H
1/2
10
7410M
1/2
7416H
7/8
7/16
7214H
1/2
11
7411M
9/16
7418H
7/8
1/2
7216H
1/2
12
7412M
5/8
7420H
7/8
9/16
7218H
1/2
13
7413M
11/16
7422H
7/8
5/8
7220H
1/2
14
7414M
3/4
7424H
7/8
11/16
7222H
9/16
15
7415M
13/16
7426H
7/8
7224H
9/16
16
7416M
7/8
7428H
7/8
17
7417M
15/16
7430H
11/8
3/4
Deep – Hex/6 Point
5/16
7710H
1
18
7418M
1
7432H
11/8
3/8
7712H
1
19
7419M
11/16
7434H
11/8
7436H
11/8
7440H
11/8
7/16
7714H
1
21
7421M
11/8
1/2
7716H
1
22
7422M
11/4
9/16
7718H
1
23
7423M
5/8
7720H
1
24
7424M
3/8
7312H
25/8
11/16
7722H
1
25
7425M
7/16
7314H
25/8
1
26
7426M
1/2
7316H
25/8
3/4
7724H
Ball Type Universal – Hex/6 Point
3/8
7273P
7/16
Deep – Hex/6 Point
27
7427M
9/16
7318H
25/8
1/2
28
7428M
5/8
7320H
25/8
7274P
1/2
30
7430M
11/16
7322H
29/16
1/2
7275P
9/16
32
7432M
3/4
7324H
29/16
9/16
7276P
9/16
13/16
7326H
29/16
7/8
7328H
23/4
15/16
7330H
23/4
1
7332H
211/16
11/16
7334H
211/16
11/8
7336H
211/16
Ball Type Universal – Hex/6 Point
26
7/16
7474P
3/8
1/2
7475P
3/8
9/16
7476P
9/16
5/8
7477P
5/8
3/4
7479P
11/16
13/16
7480P
11/16
1" Square Drive
3⁄4" Square Drive
Wrench
Size in.
Part
Number
Bolt
Depth in.
Standard – Hex/6 Point
9/16
3/4
Wrench
Size in.
1" Square Drive (cont.)
Part
Number
Bolt
Depth in.
Standard – Hex/6 Point
07509
3/4
3/4
Wrench
Size in.
Part
Number
Bolt
Depth in.
Deep – Hex/6 Point
10012
11/8
115/16
10021L
23/8
07512
15/16
13/16
10013
11/8
11/2
10024L
23/8
13/16
07513
15/16
7/8
10014
11/8
15/8
10026L
27/8
15/16
10015
11/8
11/16
10017–LT
31/8
11/4
10020–LT
31/8
7/8
07514
1
15/16
07515
1
1
10016
11/4
1
07516
11/16
11/16
10017
11/4
11/16
07517
11/16
11/8
10018
11/4
11/8
07518
11/16
13/16
10019
11/4
13/16
07519
11/8
1 ⁄4
10020
13/8
11/4
1
07520
11/8
15/16
10021
17/16
15/16
07521
11/8
13/8
10022
11/2
13/8
07522
11/8
17/16
10023
11/2
07523
15/32
11/2
10024
19/16
07524
15/32
19/16
10025
15/8
15/8
10026
111/16
111/16
10027
13/4
17/16
11/2
Deep – Hex/6 Point
3/4
07512L
15/8
13/16
07513L
15/8
13/4
10028
113/16
7/8
07514L
15/8
113/16
10029
17/8
15/16
07515L
15/8
17/8
10030
115/16
1
07516L
2
115/16
10031
2
11/16
07517L
2
2
10032
21/16
11/8
07518L
2
21/16
10033
21/8
13/16
07519L
23/16
21/8
10034
23/16
11/4
07520L
23/16
23/16
10035
21/4
15/16
07521L
23/16
21/4
10036
25/16
13/8
07522L
25/16
25/16
10037
23/16
17/16
07523L
23/8
23/8
10038
21/4
11/2
07524L
23/8
27/16
10039
23/8
21/2
10040
21/2
29/16
10041
21/2
25/8
10042
21/2
211/16
10043
23/4
23/4
10044
23/4
213/16
10045
23/4
2 7/8
10046
23/4
215/16
10047
3
3
10048
3
31/8
10050
31/8
33/8
10054
3
31/2
10056
3
Thin Wall Deep – Hex/6 Point
27
Sockets and Accessories
11⁄ 2" Square Drive
Wrench
Size in.
Part
Number
11⁄ 2" Square Drive (cont.)
Bolt
Depth in.
Standard – Hex/6 Point
13/8
17/16
Part
Number
Bolt
Depth in.
Standard – Hex/6 Point
15022
21/8
37/8
315/16
Wrench
Size in.
Part
Number
Bolt
Depth in.
Deep – Hex/6 Point
15062
33/4
31/8
15050L
43/4
15063
33/4
33/16
15051L
47/8
31/4
15052L
47/8
15023
21/8
11/2
15024
21/8
4
15064
31/2
19/16
15025
21/8
41/8
15066T
33/4
35/16
15053L
47/8
15/8
15026
21/8
43/16
15067
33/4
37/16
15055L
47/8
111/16
15027
21/8
41/4
15068
33/4
31/2
15056L
47/8
13/4
15028
21/8
45/16
15069
41/8
39/16
15057L
51/8
113/16
15072
4
35/8
15058L
51/8
311/16
15059L
51/8
15029
21/8
41/2
17/8
15030
21/8
45/8
15074
4
115/16
15031
21/8
43/4
15076
4
2
15032
21/8
21/16
Deep – Hex/6 Point
33⁄4
15060L
51/8
313/16
15061L
51/8
15033
21/8
13/8
15022L
31/4
37/8
15062L
51/8
21/8
15034
21/8
17/16
15023L
31/4
41/2
15072L
55/8
23/16
15035
21/8
11/2
15024L
31/4
45/8
15074L
57/8
2 ⁄4
15036
25/8
19/16
15025L
31/4
25/16
15037
25/8
15/8
15026L
31/4
23/8
1
28
Wrench
Size in.
11⁄ 2" Square Drive (cont.)
15038
25/8
111/16
15027L
31/4
27/16
15039
25/8
13/4
15028L
31/4
21⁄2
15040
25/8
113/16
15029L
31/4
29/16
15041
25/8
17/8
15030L
31/4
25/8
15042
23/4
115/16
15031L
31/4
211/16
15043
23/4
2
15032L
31/4
23/4
15044
27/8
21/16
15033L
31/4
213/16
15045
27/8
21/8
15034L
31/4
27/8
15046
31/8
23/16
15035L
31/4
215/16
15047
31/8
21/4
15036L
35/8
3
15048
31/8
25/16
15037L
35/8
31/8
15050
33/8
23/8
15038L
35/8
33/16
15051
33/8
27/16
15039L
35/8
31/4
15052
31/2
21/2
15040L
35/8
35/16
15053
31/2
29/16
15041L
35/8
33/8
15054
31/2
25⁄8
15042L
37/8
37/16
15055
33/4
211/16
15043L
37/8
31/2
15056
33/4
23/4
15044L
37/8
39/16
15057
33/4
213/16
15045L
41/2
35/8
15058
33/4
27/8
15046L
41/2
311/16
15059
33/4
3
15048L
43/4
33/4
15060
33/4
31/16
15049L
43/4
21⁄ 2" Square Drive
Wrench
Size in.
Part
Number
No. 5 Spline Drive(1)
Bolt
Depth in.
Wrench
Size in.
Part
Number
“O” Rings and Retaining Pins
Bolt
Depth in.
Description
For 21⁄2" Square Drive Sockets
Standard – Hex/6 Point
Standard – Hex/6 Point
Part
Number
215/16
7/8
09914
11/2
588-216
41/8" I.D. “O” Ring
25030
215/16
11/16
09917
11/2
588-215
45/8" x 5/16" Retaining Pin
2
25032
215/16
13/16
09919
11/2
1
21/8
25034
215/16
11/4
09920
11/2
599-216
61/4" I.D. “O” Ring
25036
215/16
17/16
09923
15/8
599-215
61/2" X 1/2" Retaining Pin
09924
15/8
09926
13/4
09932
21/8
13/4
17/8
21/4
25028
25038
215/16
11/2
25/8
25042
215/16
15/8
23/4
23/8
25044
215/16
215/16
25047
215/16
3
25048
215/16
31/8
25050
315/32
31/4
25052
315/32
33/8
25054
315/32
31/2
25056
315/32
35/8
25058
315/32
33/4
25060
33/4
37/8
25062
33/4
4
25064
331/32
41/8
25066
331/32
41/4
25068
47/32
43/8
25070
47/32
41/2
25072
43/4
45/8
25074
43/4
47/8
25078
43/4
5
25080
43/4
51/8
25082
431/32
51/4
25084
431/32
53/8
25086
511/32
51/2
25088
511/32
55/8
25090
515/32
61/4
25100
5
2
(1)
For 3 ⁄2" Square Drive Sockets
14 Spline, 1 ⁄8" Diameter
5
29
Sockets and Accessories
One Piece Socket Retainers
Warning: One Piece Socket Retainers
should not be used for
any purpose other than
to retain sockets on
Impactools. Always
check for wear on
pin before using. Refer
to the instructions furnished with the Retainer for selection of
correct sizes and installation procedure.
Power Universal Joints
Power Quick Change Chuck
Universal joints make it easy to work
around difficult angles and hard-to-reach
nuts.
For greatest versatility on screw-driving
jobs, snap a Quick Change Chuck on the
drive of your Impactool. A wide variety of
hex shank bits can be easily inserted and
quickly changed by merely pushing on the
spring loaded collar.
Driver
Part
Number
Inside Diameter
in.
mm
For 3⁄4" Square Drive Sockets
Part
Number
Depth
in.
Major
Diam.
in.
11/8
Square Drive
Size in.
Female
Part
Number
41/4
13/4
3/8
2U–A925-4
1/4
23/8
3/8
502–A925-7
7/16
27/8
1/2
4U–A925-7
7/16
3/8"
Sq.
7270P
21/2
15/16
1/2"
Sq.
7470P
21/2
3/4"
Sq.
07570
RR10005S
11/4
32
1" Sq.
10670
45/16
RR10032S
17/16
37
No. 5 Spline *09670A
8
RR10034S
15/8
41
*Availability subject to prior sale.
Flush Hex Sockets
Hex Chuck
Size in.
Female
For 1" Square Drive Sockets
RR10008S
13/4
45
RR10010S
115/16
49
RR10015S
21/8-21⁄4
54-57
RR10017S
21⁄2
64
RR10019S
25/8
67
RR10020S
27/8-3
73-76
For 11⁄2" Square Drive Sockets
Socket
Size
For Series 6 and 7
3D6 Angle
Head Part No.
For Series 8 and 9
32 Angle
Head Part No.
For Series 8 and 9
53 Angle
Head Part No.
8SA34-807M
8SA34-807M
182A13MF-807
3/4"
182A88-807
13 mm
17 mm
RR10020S
27/8-3
73-76
RR10025S
33/8
86
RR10030S
37/8
98
RR10035S
43/8
111
8SA56-807M
19 mm
182A88-807
Protective Tool Boots
Keep your Ingersoll-Rand air impact ratchets, wrenches, and drills free from external
damage with protective boots. As you
Tool
Number
30
For Series 9
83 Angle
Head Part No.
work, these boots also absorb some of
the tool vibration, keeping you more
comfortable, too.
Boot
Number
Material
1702P1
202-P32
Vinyl
1701B1
211-P32
Vinyl
2705A1
231-P32
Vinyl
2131, 2131-2
2131-P32
Vinyl
2707A1
244-P32
Vinyl
2925P1
2161-P32
Vinyl
2925P3
2161-P32
Vinyl
231, 231-2
230-32
Leather
261-P32
261-1710
Vinyl
2080-P32
2080
Vinyl
Balancers
E-Z TorqueTM tool holders and Balance AirTM balancers
This unique combination of a fully adjustable tool holder and compact, efficient balancer
provides a fast, easy way of achieving optimum tool positioning with proper operator
ergonomics.
Constructed of cast aluminum and steel, with ball bearing rollers and a 48" travel, the
E-Z Torque unit eliminates spring pull-back, and can be effectively used with air or electric
tools, and can handle up to 100 ft.-lbs. of torque.
The 50 lb. capacity Balance Air unit has a capacity range of 2-50 lbs., with a floating
action that eliminates tension on the load. An external regulator provides easy adjustment,
and the unit can provide “stepped” operation by sequencing the air signal.
E-Z Torque and Balance Air – a productivity solution designed for the operator, and to
maximize the performance of Ingersoll-Rand tools.
A = 7.63”
B = 20.13”
A
7.63 IN.
[193.80mm]
C = 9.50”
Safety
Suspension
D = 10.25”
Rotating Safety
Hook
Centrifugal
Safety
D
10.25 IN.
[260.35mm]
20.13 IN. MIN.
B
[511.30mm]
Automatic Drum
Locking in Case
of Spring
Breakdown
9.50 IN. MIN.
C
[241.30mm]
Limiting
Device
MW005060S00
Air Balancer
MT005060S00
E-Z Torque
Rotation on
Ball Bearing
Capacity
Adjustment
Screw
The IRAX red balancers from IngersollRand offer you five different series to fill
all your balancing requirements. The light,
medium, intermediate, heavy and super
duty series cover weight balancing
requirements from 1 lb. to 330 Ibs.
Cable Guide
in Anti-Friction
Material
These rugged balancers are made of
die cast aluminum. A safety locking device
on the medium, heavy and super duty
models is designed to prevent dropping
of the tool should the spring fail. Easy to
use controls allow for accurate spring
adjustment.
With over 50 models to choose from
and lifts ranging from 5 to 9 feet, IRAX
balancers fill your balancer requirements
with quality from Ingersoll-Rand.
Adjustable
Stroke Limiting
Device
Manual
Drum Locking
B
M
Balancer
H = Heavy
I = Intermediate
L = Light
M = Medium
S = Super
Model Number Key
D
L
Duty
L
L = Long Cable
Locking
(8.2’ or 9.85’) Type
S = Short Cable
(6.5’)
10
Upper Weight
Capacity in
Kilograms
31
Balancers
Hose Reel Balancer – Specification
Model
No.
Hose
Nipples
Capacity
lb.
BHR-8
1/4"
BHR-15
1/4"
11/2 - 31/3
41/4
BHR-25
1/4"
25/8 - 51/2
41/4
-13/4
4.1"
5.72"
1/4"
41/4
11.75"
7/8
Lift
ft.
1/4"
Light Duty – Capacity 0.9 to 66.6 lbs. (0.4 to 3 kg)
• Rotary hook
• Self lubricating bushings
• Adjustable capacity and stroke limiting device
• Auxiliary safety suspension
1/4"
BHR Series
Capacity
Model No.
lb.
kg
lb.
BLD1
.9-2.2
0.4-1
1.3
BLD2
2.2-4.4
1-2
1.3
BLD3
4.4-6.6
2-3
1.3
Weight
net-kg
2.2"
4.3"
Lift
ft.
mm
0.6
5.2
1600
0.6
5.2
1600
0.7
5.2
1600
.3"
10.2"
11.5"
.24
"
Medium Duty – Capacity 2.2 to 26.5 lbs. (1 to 12 kg)
• Safety device prevents dropping of load due to spring breakage (except BMDS-2)
• Anti-friction cable guide
• Adjustable stroke limiting device
Capacity
Model No.
lb.
BLD Series
kg
lb.
Weight
net-kg
ft.
Lift
mm
BMDS-2
2.2-5.5
1-2.5
4.4
2.0
6.5
2000
BMDS-4
4.4-8.8
2-4
4.4
2.0
6.5
2000
BMDS-6
8.8-13.2
4-6
5.1
2.3
6.5
2000
BMDS-8
13.2-17.6
6-8
5.5
2.5
6.5
2000
BMDL-4
4.4-8.8
2-4
6.4
2.9
8.2
2500
BMDL-6
8.8-13.2
4-6
7.1
3.2
8.2
2500
BMDL-8
13.2-17.6
6-8
7.7
3.5
8.2
2500
BMDL-10
17.6-22.0
8-10
8.2
3.7
8.2
2500
BMDL-12
22.0-26.5
10-12
8.8
4.0
8.2
2500
kg
lb.
Weight
net-kg
ft.
mm
3.4"
5.9"
.3"
10.8"
.3"
11.1"
BMDS Series
Locking Type Balancer
Capacity
Model No.
lb.
Lift
BMDLL-4
4.4-8.8
2-4
6.6
3.0
8.2
2500
BMDLL-6
8.8-13.2
4-6
7.3
3.3
8.2
2500
BMDLL-8
13.2-17.6
6-8
7.9
3.6
8.2
2500
BMDLL-10
17.6-22.0
8-10
8.4
3.8
8.2
2500
3.4"
7.1"
.3"
13"
13.6"
.4"
BMDL/BMDLL Series
32
Intermediate Duty – Capacity 8 to 55 lbs. (4 to 25 kg)
• Upper rotary suspension
• Safety hook
• Auxiliary safety suspension
• Safety device prevents load dropping
due to spring breakage
• Anti-friction cable guide
• Adjustable stroke limiting device
Capacity
Model No.
lb.
kg
BIDS-7
8.8-15.4
4-7
BIDS-10
15.4-22
7-10
BIDS-14
22-30.8
10-14
BIDS-18
30.8-39.6
14-18
BIDS-22
39.6-48.4
18-22
BIDS-26
48.4-55
22-25
5.9"
9.5"
1"
.5"
.8"
24.4"
22.8"
.5"
BIDS Series
Heavy Duty – Capacity 22 to 143 lbs. (10 to 65 kg)
• Safety device prevents load dropping
due to spring breakage
• Upper suspension with rotary safety
hook
• Precision guided cable winding prevents
jamming
• Anti-friction cable guide
• Manual locking device for instant
clamping or release
• Worm screw capacity adjustment
• Spring drum assembly
• Floor controlled locking device available
as an option (BIL-7343)
1"
.6"
Model No.
lb.
Capacity
kg
lb.
Weight
net-kg
ft.
mm
BHD-15
22-33
10-15
22.7
10.3
6.5
2000
BHD-20
33-44
15-20
23.4
10.6
6.5
2000
BHD-25
44-55
20-30
25.4
11.5
6.5
2000
BHD-30
55-66
25-30
25.4
11.5
6.5
2000
BHD-35
66-77
30-35
26.0
11.8
6.5
2000
BHD-45
77-99
35-45
27.3
12.4
6.5
2000
BHD-55
99-121
45-55
27.6
12.5
6.5
2000
BHD-65
121-143
55-65
30.0
13.6
6.5
2000
8.7"
9.8"
.9"
Lift
24"
22.1"
.7"
BHD Series
BIL-7343
33
Balancers
Super Duty — Capacity 33 to 363 lbs. (15 to 165 kg)
• Cable replacement without balancer
disassembly
• Floor controlled locking device available
as an option (BIL-7343)
• Precision guided cable winding prevents
jamming
• Safety device prevents load dropping
due to spring breakage
• Manual locking device for instant
clamping or release
• Anti-friction cable guide
Capacity
Model No.
lb.
kg
lb.
Lift
ft.
mm
BSD-20
33-44
15-20
41.9
19.0
8.2
2500
BSD-30
44-66
20-30
43.7
19.8
8.2
2500
BSD-40
66-88
30-40
45.9
20.8
8.2
2500
BSD-50
88-110
40-50
52.7
23.9
8.2
2500
BSD-60
110-132
50-60
56.0
25.4
8.2
2500
BSDL-20
33-44
15-20
42.1
19.1
9.85
3000
BSDL-25
44-55
20-25
43.9
19.9
9.85
3000
BSDL-35
55-77
25-35
46.1
20.9
9.85
3000
lb.
Capacity
kg
lb.
Weight
net-kg
BSD-70
132-154
60-70
59.1
BSD-80
154-176
70-80
BSD-90
176-198
BSDL-45
Model No.
mm
26.8
8.2
2500
61.3
27.8
8.2
2500
80-90
63.5
28.8
8.2
2500
77-99
35-45
52.5
23.8
9.85
3000
BSDL-50
88-110
40-50
52.7
23.9
9.85
3000
BSDL-60
110-132
50-60
55.8
25.3
9.85
3000
BSDL-70
132-154
60-70
58.9
26.7
9.85
3000
BSDL-80
154-176
70-80
61.7
28.0
9.85
3000
BSDL-90
176-198
80-90
64.0
29.0
9.85
3000
lb.
Weight
net-kg
ft.
mm
Capacity
lb.
kg
12"
8.7"
1"
1.1"
.6"
.9"
24"
27.6"
.7"
Lift
ft.
Model No.
34
Weight
net-kg
• Alignable rotating upper hook
• Worm screw capacity adjustment
• Cable visible for inspection
• Other sizes available on request
9.1"
12"
1"
1.1"
.6"
.9"
26"
27.6"
.7"
Lift
BSD-100
198-220
90-100
78.5
35.6
8.2
2500
BSD-120
220-265
100-120
85.3
38.7
8.2
2500
BSD-140
265-309
120-140
92.2
41.8
8.2
2500
BSD-150
287-330
130-150
98.1
44.5
8.2
2500
BSD-165
330-363
150-165
106.3
48.2
8.2
2500
BSDL-100
198-220
90-100
81.1
36.8
9.85
3000
BSDL-115
220-254
100-115
85.3
38.7
9.85
3000
BSDL-130
254-286
115-130
88.0
39.9
9.85
3000
BSDL-140
286-309
130-140
94.4
42.8
9.85
3000
BSDL-150
309-330
140-150
100.6
45.6
9.85
3000
14.8"
12"
1.1"
.6"
3.4"
.9"
26"
.7"
27.6"
1"
Comfort Grips
Made from energy-absorbing Sorbothane®,
the IRAX Comfort Grip provides an isolation
barrier between your operator and the tool.
Sorbothane®, proven effective in absorbing
mechanical shocks and reducing vibrations
transmitted to the operator, has been tested
and recommended for years in medical and
athletic applications.
Impactools
Part Number
1702P & 212 Pistol
CG-1702P
231, 2705A Pistol
Features
• Nonslip urethane outer skin
• Die cut for precise tool fit
• Also available in sheet form
• Self-stick adhesive backing
• -20˚F to 180˚F operating range
• .125" thickness
CG-2705
2707A & 244P Pistol
CG-2707
2906P Pistol
CG-2906
2920P Pistol
CG-2920P
2940P
CG-2940P
1702SB & 212B
CG-1702
1720P & 261P
CG-1720P
1712, 2934, 2940, 2945,
2950, 280
CG-2934BA
For Other Applications
6" x 8" Sheet with Tape
42" Roll Seam Tape
CG-6X8
CG-ST42
Blow Guns
• Designed to meet OSHA standards
• Available in standard, 6" and 12" lengths
• Cushioned thumb grip
8338-1
Part Number
Description
†
600 Series
600-S
Standard Safety Blow Gun
600 Series
Multiple venturi holes maximize air volume
while conforming to OSHA’s requirements
on compressed air.
• Used for cleaning
600-SB
Booster Safety Blow Gun
606-S
Safety Blow Gun w/6” Extension
612-S
Safety Blow Gun w/ 12” Extension
8338 Series*
8338-2
8338-1
600-S
Safety Blow Gun with Cone of Air
8338-2
Safety Blow Gun with Rubber Tip
33970
10" Extension Tip for 8338 Series
8440 Series*
8440
Safety Yellow, Lightweight,
Polyester Blow Gun
Safety Extensions – Used on 600 Series
ST206
6" Safety Extensions
ST212
12" Safety Extensions
Blow Gun Tips – Used on 600 Series
ST10
Standard Safety Tip
8440
ST11
Safety Air Booster Tip
1
⁄4" NPT – Maximum Tip Pressure 30 psig per OSHA
Requirement.
606-S and 612-S
* Maximum Inlet Pressure 250 psig.
† Maximum Inlet Pressure 150 psig.
ST10
ST11
ST206 and ST212
35
Lubricants
Lubrication
Oils
Proper lubrication of air tools is a must to
prevent excessive wear of moving parts;
to prevent possible rust and corrosion of
bare, unprotected surfaces; and to provide
smooth operation of motors, impact mechanisms, and other important components.
Ingersoll-Rand has a full line of oils and
greases which has been tested thoroughly
and is recommended without reservation.
Part
Number
Oil
Number
Quantity
Recommended Use
63Z4
63
4 oz.
Cyclone Wick Lubricant
16 oz.
Spray Bottle
5 gal.
Lubricant
4 oz.
1 pt.
1 gal.
55 gal.
For Percussive Tools,
Assembly Tools and
Series CD, CX, CA, TD,
TX, TA and TXA Grinders
1 pt.
1 gal.
Motors of Series 1, 61,
77, 88 and 99 Grinders,
Impactools, Sump
Pumps, Vibrators, Saws,
Hoists and Winches
1 gal.
Hoist & Winch Gear
Boxes
Chain Lubricant
Lubri-Link-Green
LLG-5
Class I Lubricant
10Z4
10P
10G
10G55
10
Class II Lubricant
50P
50G
50
50
62 1 Gal
Greases
Part
Number
Grease
Number
Quantity
Recommended Use
23-1 LB
23
1 lb
Gearing of Drills
28 1 LB
28 8 LB
28
1 lb
8 lb
Screwdriver Gearing and Clutches; Drills, Grinders, Saws; Tie Tampers
66 1 LB
66 8 LB
66
1 lb
8 lb
Slow Speed, High Torque Angle Heads
67-4T
67-1 LB
67 8 LB
67
67
4 oz.
1 lb
8 lb
High Speed Angle Heads-High Temp (Green)
68-1 LB
68 8 LB
68
68
1 lb
8 lb
Coupling Splines and High Speed Angle Heads
70 1 LB
70 8 LB
70
1 lb
8 lb
Large Piston Motor Gear Cases
80 1 LB
80 8 LB
80
1 lb
8 lb
Bearings of All Sump Pumps
90-14 oz
90
14 oz.
Offset Gear Heads for Tube Nut Wrenches
100 1 LB
100 8 LB
100
1 lb
8 lb
Impact Mechanisms of Most Impactools
4 oz. tube
1 lb
8 lb
Impact Mechanisms of Most Impactools and for Assembly
of 2131 Impact Mechanisms.
4 oz. tube
1 lb
For General Maintenance on 2131 Impactool Mechanisms
1 lb
8 lb
All Impact Mechanisms with Swinging Weight (900 Series)
105-4T-6(1)
105-1 LB
105-8 LB
115-4T-6(1)
115-1 LB
150-1 LB
150 8 LB
(1)
Six tubes of 105 grease
36
105
115
150
Anti-Freeze
Grease Guns
Part Number
Quantity
Part Number
Quantity
General Description
10GW
1 gal.
P25-228
3 oz.
Push-type Hand Gun for
Hydraulic-type Fittings
R000A2-228
3 oz.
Push-type Hand Gun for
Flush-type Fittings
Rock Drill Oil
Part Number
Quantity
51378701
1 gal.
Light
Below 20˚F or (6.7˚C)
51378693
1 gal.
Medium
20˚-90˚F (-6.7˚ to 32.2˚C)
GTH-1
For Grease Tubes
P25-228
Air Care Kits
Part Number
General Description
67-LBK1
Angle Grinder Gear
105-LBK1
Impactools Mechanisms,
Greased via rear of tool.
115-LBK1
2131 Series
ROOOA2-228
GTH-1
Tune-Up Kits
Impactools
Impactools
Tune-Up Kit Number
Tools Used On
Tune-Up Kit Number
Tools Used On
1702B-TK2
1701B, 1702B, 2902B, 212B
2707-TK2
2707A1, 2707A7, 244P
1702P-TK2
1701P, 1702P, 2902P, 212P
2903P-TK2
2903P1, 2903P2, 2903P7
1702SB-TK2
1702SB, 2902SB
2904P-TK2
2904P1, 2904P2, 2904P4
1705P-TK2
1705P1
2905P-TK2
2905P1, 2905P7
1709P-TK2
1709P
2906P-TK1
2906P1, 2906P7
1710B/1710P-TK3
1710B1, 1710P1, 1711B3, 1711P3
2908P-TK2
2908P
1712B/1712P-TK3
1712B2, 1712B4, 1712P1, 280
2910-TK4
2910B, 2910P
1720B-TK2
1720B, 261B
2920B-TK2
2920B
1720P-TK2
1720P, 261P
2920P-TK2
2920P
2131P-TK2
2131P
2161-TK2
2161, 2171
2131-K36
2131 Seal Kit
2925-TK2
2925
2131P-THK1
Hammer Kit
2934-TK3
2934, 2934P
221-TK2
221
2940-TK3
2940, 2940P
223-TK2
223
2945-TK2
2945
231-TK3
231, 251P
2950-TK2
2950
2705-TK3
2705, 251P
5020-TK2
5020, 5020H, 5020T, 5020TH
2706-TK3
2706
5040-TK2
5040, 5040T, 5040TD, 5040TDQ
37
Hose Couplings
Universal Hose Couplers
(full flow non-shutoff; shutoff air supply
before disconnecting.)
Gaskets and clip are included with all
Universal Couplers.
Description
and Illustration
Malleable
Part Number
A Universal Hose End
UH-50-M
UH-75-M
UH-100-M
B Universal Male Pipe
Threaded End
A
D
E
Hose
Size in.
1/2
3/4
1
UM-37-M
UM-50-M
UM-75-M
UM-100-M
3/8
C Universal Female Pipe
Threaded End
UF-50-M
UF-75-M
UF-100-M
1/2
D Universal 3-Way
UW-300-B
1/4
to 1
UD-301-M
1/4
to 1
B
C
Bronze
Part Number
E Universal Dead End
1/2
3/4
1
3/4
1
Universal Coupler Gasket
For use in any Universal
Coupler, Part Number
UG-100.
O-Rings for Type A Couplings
Part Number
Body Size
Used in Model
BU-948
R4-103
5/8"
1"
FH, FO, MDY, MY
FH, FO, CA
Type A Hose Couplers
(full flow non-shutoff; turn off air supply before disconnecting.)
The IR type “A” couplers come in 5/8" and 1" body sizes. Designed for heavy duty service, the type “A” couplers are simple, sturdy and
able to withstand hard usage and abuse without affecting their efficiency. Type “A” couplers and plugs are compatible within the same
“Body” size.
Type
A
A
“A” End Size in.
MH-8-1/2
3/8"
1/2"
Hose
Hose Plug
5/8"
MH-8-3/4
5/8"
3/4"
Hose
1" Hose
1"
MH-8A-1
13/16"
MNPT Plug
5/8"
MO-8-1/2
3/8"
1/2"
MNPT
MNPT Plug
5/8"
MO-8-3/4
5/8"
3/4"
MNPT
MNPT Plug
1"
MO-8A-1
13/16"
1" MNPT
Hose Coupler
5/8"
FH-8-1/2
3/8"
1/2"
Hose
Hose Coupler
5/8"
FH-8-3/4
9/16"
3/4"
Hose
FH-8-1
13/16"
1" Hose
FO-8-3/8
3/8"
3/8"
MNPT
1/2"
MNPT
MNPT
1"
MNPT Coupler
5/8"
MNPT Coupler
5/8"
FO-8-1/2
1/2"
MNPT Coupler
5/8"
FO-8-3/4
5/8"
3/4"
FO-8-1
15/16"
1" MNPT
MNPT Coupler
38
Max. Flow Opening
5/8"
Hose Coupler
A
Part Number
Hose Plug
Hose Plug
A
Body Size
1"
B
B
A
A
MDY-8A-3/4
B
MY-8A-3/4
B
B
A
CA-8A
Adapters
Description
Body Size
Part Number
“Y” Shut off Valve
5/8"
MDY-8A-3/4
1/2"
1/2"
“Y” Adapter
5/8"
MY-8A-3/4
1/2"
1/2"
CA-8A*
5/8"
1" Female
1" to 1/2" Reducer
1"
Max. Flow Opening
“A” End Size in.
“B” End Size in.
Female
1/2"
Plug
Female
1/2"
Plug
1/2"
Plug
*CA-8A Reduces from the 1" body size down to a 3/4" NPT female thread. It comes with one MO-8-1/2 screwed into the “B” end.
Swivel-It!™
Introducing the NEW, non-marring,
composite Swivel-It from Ingersoll-Rand.
The NEW Swivel-It is made from nonmarring, high impact, chemical resistant
composite material. The NEW composite
Swivel-It is available in 1/4" NPT and
provides 32% more air flow with 33 scfm.
The Swivel-It is designed to reduce operator fatigue by allowing the air hose to
hang straight to the floor, enhancing
maneuverability and increasing operator
comfort and productivity. For use with
drills, screwdrivers, impact tools, angle
wrenches, grinders, polishers, and
sanders. Not for use with percussive tools.
The adjustable 1/4" NPT Swivel-It as
well as the 3/8" NPT and 1/2" NPT are
currently available only in aluminum.
Look for additional Swivel-It models
available in composite.
Thread Part
Size
Number
ASC-1/4(2)
0-25 cfm Adjustable
ASA-1/4
0-25 cfm Non-Marring
3/8"
AS-3/8
0-45 cfm Standard
1/2"
AS-1/2
0-65 cfm Standard
1/4"
1/4"
(1)
(2)
Air Flow Range
(1)
Adjustable air flow
Composite
ASC-1/4
PR Series (Quick Connect Composite Safety Couplers)
PR Couplers
Avg. Flow
CFM
IR Part
Description
PRSGF22
1/4"
PRSGF23
3/8"
FNPT
PRSGF33
3/8"
PRSGF34
1/2"
FNPT 3/8" Body, Safety Coupler
PRSGM22
1/4"
MNPT
PRSGM23
3/8"
PRSGM33
3/8"
MNPT
PRSGM34
1/2"
PRSGH22
1/4"
ID Hose
PRSGH23
3/8"
PRSGH33
3/8"
ID Hose
PRSGH34
1/2"
PR Connectors
IR Part
Description
32
PRPF22
1/4"
FNPT 1/4" Body, Connector
Body, Safety Coupler
32
PRPF23
3/8"
FNPT 1/4" Body, Connector
FNPT 3/8" Body, Safety Coupler
64
PRPF32
1/4"
FNPT 3/8" Body, Connector
64
PRPF33
3/8"
FNPT 3/8" Body, Connector
Body, Safety Coupler
32
PRPM22
1/4"
MNPT 1/4" Body, Connector
MNPT 1/4" Body, Safety Coupler
32
PRPM23
3/8"
MNPT 1/4" Body, Connector
Body, Safety Coupler
64
PRPM32
1/4"
MNPT 3/8" Body, Connector
MNPT 3/8" Body, Safety Coupler
64
PRPM33
3/8"
MNPT 3/8" Body, Connector
Body, Safety Coupler
32
PRPH22
1/4"
ID Hose 1/4" Body, Connector
ID Hose 1/4" Body, Safety Coupler
32
PRPH23
3/8"
ID Hose 1/4" Body, Connector
Body, Safety Coupler
64
PRPH33
3/8"
ID Hose 3/8" Body, Connector
ID Hose 3/8" Body, Safety Coupler
64
PRPH34
1/2"
ID Hose 3/8" Body, Connector
FNPT 1/4" Body, Safety Coupler
1/4"
1/4"
3/8"
1/4"
3/8"
39
Impactools Index
(Alpha order / Numerical order by first letter / Digit of model)
MODEL
DESCRIPTION
PAGE
MODEL
DESCRIPTION
PAGE
MODEL
DESCRIPTION
1702P1
1702P4
3/8" CLASS IMPACTOOL
5
2908P1
3/8" CLASS IMPACTOOL
5
2908P2
1702SB1
3/8" CLASS IMPACTOOL
5
1712B2
1" CLASS IMPACTOOL
1712P2
3/4" CLASS IMPACTOOL
10
2950A7
1 1/2" CLASS IMPACTOOL
14
3/4" CLASS IMPACTOOL
10
2950B1
1 1/2" CLASS IMPACTOOL
14
2920B1
3/4" CLASS IMPACTOOL
10
2950B7
1 1/2" CLASS IMPACTOOL
14
12
2920B3
3/4" CLASS IMPACTOOL (1")
10
588A1
2 1/2" CLASS IMPACTOOL
15
1" CLASS IMPACTOOL
12
2920B9
3/4" CLASS IMPACTOOL
10
599A1
3 1/2" CLASS IMPACTOOL
15
1720B1
3/4" CLASS IMPACTOOL
10
2925P1
3/4" CLASS IMPACTOOL
10
5020TAH1
TORQUE CONTROL IMPACTOOL
19
1720B3
3/4" CLASS IMPACTOOL (1")
10
2925P3
3/4" CLASS IMPACTOOL
10
5020TAL1
TORQUE CONTROL IMPACTOOL
19
1720P1
3/4" CLASS IMPACTOOL
10
2925RBP1
3/4" CLASS IMPACTOOL
10
5020TDQ
TORQUE CONTROL IMPACTOOL
19
1720P3
3/4" CLASS IMPACTOOL (1")
10
2925RBP3
3/4" CLASS IMPACTOOL
10
5040TAH1
TORQUE CONTROL IMPACTOOL
19
1734A1
1" CLASS IMPACTOOL
12
2934A2
1" CLASS IMPACTOOL
12
5040TAL1
TORQUE CONTROL IMPACTOOL
19
2131P
1/2" CLASS IMPACTOOL
6
2934B1
1" CLASS IMPACTOOL
12
5040TAM1
TORQUE CONTROL IMPACTOOL
19
2131P7
1/2" CLASS IMPACTOOL (7/16")
6
2934B2
1" CLASS IMPACTOOL
12
5040TDQ
TORQUE CONTROL IMPACTOOL
19
2161P
3/4" CLASS IMPACTOOL
10
2934B9
1" CLASS IMPACTOOL
12
5980A1
1 1/2" CLASS IMPACTOOL
14
2171P
3/4" CLASS IMPACTOOL
10
2934P2
1" CLASS IMPACTOOL
12
5982A1
2 1/2" CLASS IMPACTOOL
15
2705A1
1/2" CLASS IMPACTOOL
6
2940A1
1" CLASS IMPACTOOL
13
8005
ELECTRIC IMPACTOOL
22
2707A1
1/2" CLASS IMPACTOOL
6
2940A2
1" CLASS IMPACTOOL
13
8049
ELECTRIC IMPACTOOL
22
2902P1
3/8" CLASS IMPACTOOL
5
2940B1
1" CLASS IMPACTOOL
13
8053
ELECTRIC IMPACTOOL
22
2903P1
1/2" CLASS IMPACTOOL
6
2940B2
1" CLASS IMPACTOOL
13
8053QC
ELECTRIC IMPACTOOL
22
2903P2
3/8" CLASS IMPACTOOL
5
2940P2
1" CLASS IMPACTOOL
13
8055
ELECTRIC IMPACTOOL
22
2904P1
3/8" CLASS IMPACTOOL
5
2945A7
1 1/2" CLASS IMPACTOOL
14
8056
ELECTRIC IMPACTOOL
22
2904P2
1/2" CLASS IMPACTOOL
6
2945B1
1 1/2" CLASS IMPACTOOL
14
8062
ELECTRIC IMPACTOOL
22
2906P1
1/2" CLASS IMPACTOOL
6
2945B7
1 1/2" CLASS IMPACTOOL
14
40
PAGE
Contact Information
United States
Canada
Europe/Middle East/Africa
Marketing/Sales/Service Headquarters
Ingersoll-Rand Tool and Hoist Division
1467 Rte. 31 South
Annandale, NJ 08801
Telephone: (908) 238-7000
Fax: (908) 238-7052
Distribution Center
Ingersoll-Rand Tool and Hoist Division
510 Hester Drive
White House, TN 37188
Telephone: (615) 672-0321
Fax: (615) 672-0801
Central Regional Office
Ingersoll-Rand Tool and Hoist Division
131 W. Diversey Avenue
Elmhurst, IL 60126-1102
Telephone: (630) 530-3873
Fax: (630) 530-3891
Detroit/Metro Regional Office
Ingersoll-Rand Tool and Hoist Division
1872 Enterprise Drive
Rochester Hills, MI 48309
Telephone: (248) 293-5700
Fax: (248) 293-5807
Eastern Regional Office
Ingersoll-Rand Tool and Hoist Division
900 East 8th Avenue, Suite 103
King of Prussia, PA 19406
Telephone: (610) 337-5930
Fax: (610) 337-5912
Southern Regional Office
Ingersoll-Rand Tool and Hoist Division
450 Gears Road, Suite 210
Houston, TX 77067-4516
Telephone: (281) 872-6800
Fax: (281) 872-6807
Western Regional Office
Ingersoll-Rand Tool and Hoist Division
13107 Lakeland Road
Santa Fe Springs, CA 90670
Telephone: (562) 777-0808
Fax: (562) 777-0818
Marketing/Sales/Service Headquarters
Ingersoll-Rand Canada Inc.
51 Worcester Road
Toronto, Ontario M9W 4K2
Telephone: (416) 213-4500
Fax: (416) 213-4510
Alberta
Ingersoll-Rand Canada Inc.
9720-54 Avenue
Edmonton, Alberta T6E 0A9
Telephone: (780) 438-5039
Fax: (780) 430-4500
Quebec
Ingersoll-Rand Canada Inc.
3501 St. Charles Blvd. Suite 104
Kirkland, Quebec H9H 4S3
Telephone: (514) 695-9040
Fax: (514) 695-0963
British Columbia
Ingersoll-Rand Canada Inc.
1200 Cliveden Ave.
Delta, B.C. V3M 6G4
Telephone: (604) 523-0803
Fax: (604) 523-0801
Tool & Hoist Division Headquarters and
European Customer Care Centre
Ingersoll-Rand
Zone du Chêne Sorcier
BP 62
78346 Les Clayes sous Bois Cedex
France
Telephone: +33 (0)1 30 07 68 00
Fax: +33 (0)1 30 07 69 80
Ingersoll-Rand Distribution Centre
Swan Lane
Hindley Green
Wigan
Lancashire WN2 4EZ
England
Phone: +44 (0)1942 257131
Fax: +44 (0)1942 526255
Latin America
Marketing/Sales/Service Headquarters
Ingersoll-Rand Company
730 N.W. 107th Ave. Suite 300
Miami, FL 33172-3107
Telephone: (305) 559-0500
Fax: (305) 222-0864
Brasil
Ingersoll-Rand do Brasil Ltda.
Tool & Hoist Division
Av. Dr. Cardoso de Melo 1855
cj. 152-04548-005 Sao Paulo,. SP
Brasil
Telephone: (55) 11 3049-8900
Fax: (55) 113846-4985
Chile
Ingersoll-Rand Chile
Nueva Tajamar 555, 15th fl.
Las Condes, Santiago
Chile
Telephone: (56) 2 339-7939
Fax: (56) 2 339-7940
Mexico
Ingersoll-Rand S.A. de C.V.
Tool & Hoist Division
Blvd. Centro Industrial #11
Fracc. Industrial Puente de Vigas, 54090
Tlaneplanta, Edo. de Mexico, Mexico
Telephone: (52) 5 565-3061
Fax: (52) 5 565-3072
Disclaimer: Nothing contained within this brochure is intended to extend any warranty or representation, expressed or implied, regarding the
products described herein. Any such warranties or other terms or conditions of the sale of products shall be in accordance with Ingersoll-Rand
Standard Terms and Conditions of Sale for such products which are available upon request.
Product improvement is a continuing goal at Ingersoll-Rand. Designs and specifications are subject to change without notice or obligation.
Asia/Pacific
Marketing/Sales/Service Headquarters
Ingersoll-Rand Asia Pacific
23/F., 625 Kings Point Road
North Point
Hong Kong
Phone: (852) 2527 -0183
Fax: (852) 2529 -5976
Australia
Ingersoll-Rand Australia, Ltd.
1 Hartnett Drive
Mail: PMB 2, Carrum Downs BC, Vic., 3201
Seaford, Victoria 3198
Australia
Phone: (61) 3 9554 1600
Fax: (61) 3 9554 1611
India
Ingersoll-Rand Wadco Tools, Ltd.
37A, Site 4
Sahibabad Industrial Area
Ghaziabad 201 010 (UP)
Phone: (91) 0120-4771-001-4
Fax: (91) 0120-4771-005
For additional specific information on IngersollRand locations in Europe and Asia, visit our
website at: www.irtools.com.
Ingersoll-Rand Company
Tool and Hoist Division
1467 Route 31 South
Annandale, New Jersey 08801
www.irtools.com
© 2001 Ingersoll-Rand Company
Form 52838 Printed in USA
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising