SmartBoom PRO
SmartBoom
PRO
>>
The latest in headset technology
The SBP Headset from CoachComm provides
exceptional comfort and reliability while introducing
advanced features and design enhancements.
The SBP Headset features our SmartBoom technology,
allowing the microphone boom to act as an On/Off
switch for quick microphone muting. Additionally, the
headset provides high ambient-noise reduction and
produces high quality audio using a hyper-cardioid
dynamic microphone. Lastly, the headset has a flexible
design and soft padding to offer superior comfort.
SBP-152
CoachComm introduces the NEW SmartBoom PRO
®
The ONLY headset featuring SmartBoom technology and a sleek,
new design ideal for sponsorship branding.
F E A T U R E S
w w w . c o a c h c o m m . c o m
• SmartBoom® Technology - Raising the Boom
Mutes the Mic
•Rubber Coating Provides Enhanced Design
and Durability
• Sleek, Low Profile Design Available in Singleand Dual-Ear Models
•Collapsible Design for Easy Storage
• Flat Surface Areas Provide Ample Branding
Space for Sponsors
•Detachable Cable Allows for Quick and Easy
Field Repairs and Connector Options
• Outstanding Audio Quality with Enhanced
Acoustic Isolation
•Soft-Padded Ear Pads and Head Pads can
be Easily Replaced
• Dynamic, Noise-Cancelling Cardioid
Microphone
•Cable Terminated with 4-PIN XLR Female
•Flexible, Ambidextrous Swiveling Mic Boom
205 Technology Parkway
Auburn, AL 36830
1.800.749.2761
www.coachcomm.com
SBP-151
©2015 CoachComm, LLC. All rights reserved.
CoachComm, SmartBoom and Tempest logos are
registered trademarks of CoachComm, LLC.
SmartBoom® PRO Headset
Wiring Diagram for
Connector Inputs
>>
Coaching Communications
PIN CONNECTIONS
Headset Plug Pin
Cable
XLR Plug Pin
8
Blue – Speaker R+
4
Microphone
7
Brown – Speaker L+
4
Microphone Type
Dynamic
6
Red – Speaker R-
3
Frequency Response 5
Orange – Speaker L-
3
Mic Sensitivity 50–10,000 Hz
-58 dBV/Pa
2
Yellow – Mic+
2
Pattern
1
Green – Mic-
1
Output Impedance 200 Ω
Isolation from Headphone 40 dBv
3
Uncoated – Shield
1
4
No Connect
NC
Sponsor Specifications
Cardioid uni-directional
Speaker (Headphone)
Frequency Reponse
20–20,000 Hz
Nominal Impedance
100 Ω
Sensitivity at 1 kHz
Single
Double
117 dB SPL/mW
121 dB SPL/mW
Speaker Type
Centerline between boom and top of earcup
2.40
1.20
BOOM SIDE
Centerline
about earcup rotation
Max Input Power
Dynamic
500 mW
.87
Cables
Termination at Ear
Termination at Jack
Removable (Crossbolt)
Length
4-pin XLR Female
5.00 ft. (1.52 m)
Outside Diameter
2.29
0.24 in. (6.00 mm)
Physical Features
Outer Ear Cup Surface Diameter
With Boom
Without Boom Mic Boom Length
2.40 in. (60.96 mm)
3.17 in. (80.52 mm)
8.50 in. (215.90 mm)
Weight (without cable)
3.17
NON-BOOM
SIDE rotation
Centerline
about earcup
1.64
Single
8.1 oz (229.63 g)
Double
11.4 oz (323.18 g)
Cable
1.14
2.29
MEASUREMENTS IN INCHES
Manufacturer reserves the right to change specifications
to reflect latest changes in technology and improvements
at any time without notice.
©2015 CoachComm, LLC. All rights reserved.
CoachComm, SmartBoom and Tempest logos are
registered trademarks of CoachComm, LLC.
205 Technology Parkway
Auburn, AL 36830
1.800.749.2761
TDSBP15
www.coachcomm.com
3.8 oz (107.73 g)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising