24-Port 10/100/1000Mbps 802.3at PoE with 4-Slot

24-Port 10/100/1000Mbps 802.3at PoE with 4-Slot
WGSW-24040HPx
24-Port 10/100/1000Mbps 802.3at PoE with
4-Slot Shared SFP Managed Switch
Physical Port
• 24-Port 10/100/1000Base-T RJ-45 copper with IEEE
802.3at/802.3af Power over Ethernet Injector function
• 4 100/1000Base-SX/LX DDM SFP shared interfaces
• RS-232 DB9 console interface
The WGSW-24040HP series is the latest generation of PLANET Managed Gigabit
PoE Switches featuring PLANET intelligent PoE functions to improve the availability
of critical business applications. The series provides IPv6/IPv4 management and
built-in L2/L4 Gigabit Switching engine along with 24 10/100/1000Base-T ports
featuring 30-watt 802.3at PoE+ and 4 Gigabit SFP slots. With total power budget
up to 220W and 440W for different kinds of PoE applications, the series provides
Power over Ethernet
• Complies with IEEE 802.3at High Power over Ethernet
End-Span PSE
• Complies with IEEE 802.3af Power over Ethernet EndSpan PSE
quick, safe and cost-effective Power over Ethernet network solutions to security IP
• Up to 24 ports of IEEE 802.3at/802.3af devices powered
surveillance for small business and enterprises.
• Supports PoE power up to 30.8 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between
ports
• Remote power feeding up to 100 meters
• PoE Management
Reset Button
Console Port
24 x Gigabit 802.3at PoE Ports
4 x Gigabit TP/SFP Combo Ports
WGSW-24040HP offers 220W power budget
WGSW-24040HP4 offers 440W power budget
–– Total PoE power budget control
–– Per port PoE function enable/disable
–– PoE port power feeding priority
Centralized Power Management for Gigabit Ethernet PoE Networking
–– Per PoE port power limit
To fulfill the needs of higher power required PoE network applications with gigabit
–– PD classification detection
speed transmission, the WGSW-24040HP series features IEEE 802.3at power
–– PD Alive-check
over Ethernet plus(PoE+) that combines up to 30 watts of power output and data
per port over one CAT 5E/6 Ethernet cable. It is designed specifically to meet the
demand of higher power consuming network PD (powered devices) such as IR,
–– PoE schedule
–– PD power recycling schedule
PTZ, Speed Dome cameras or even Box type IP cameras with built-in fan and
heater. Compliant with both 802.3at and 802.3af, the series allows more flexibility in
power requirement for a variety of PDs.
Layer 2 Features
• Prevents packet loss with back pressure (Half-Duplex)
and IEEE 802.3x PAUSE frame flow control (Full-Duplex)
Number of Powered Devices
Model & PoE Budget
Applications
WGSW-24040HP
WGSW-24040HP4
220 watts
440 watts
• High performance of Store-and-Forward architecture
and runt/CRC filtering eliminates erroneous packets to
24
Class 2 PD @ 7 watts
PoE Mini Dome
PoE Ability
(100 meters)
optimize the network bandwidth
• Storm Control support
14
Class 3 PD @ 15 watts
PoE Box IP Camera
24
PoE VoIP Phone
24
PoE Wireless AP
–– Broadcast/Multicast/Unknown unicast
• Supports VLAN
–– IEEE 802.1Q Tagged VLAN
7
Class 4 PD @ 30 watts
14
PoE+ Speed Dome
1
WGSW-24040HPx
Built-in Unique PoE Functions for Powered Devices Management
As a managed PoE Switch for surveillance, wireless and VoIP network, the
WGSW-24040HP series features special PoE Management functions:
–– Up to 255 VLANs groups, out of 4094 VLAN IDs
yy PD ALIVE Check
–– Supports provider bridging (VLAN Q-in-Q, IEEE
yy Schedule Power Recycle
802.1ad)
yy SMTP/SNMP Trap Event Alert
–– Private VLAN Edge (PVE)
yy PoE Schedule
–– Protocol-based VLAN
Intelligent Powered Device Alive-Check
–– MAC-based VLAN
The WGSW-24040HP series can be configured to monitor connected PD (Powered
–– Voice VLAN
Device) status in real-time via ping action. Once the PD stops working and responding,
the WGSW-24040HP series will resume the PoE port power and bring the PD back to
work. It will greatly enhance the network reliability through the PoE port resetting the
PD’s power source and reducing administrator management burden.
• Supports Spanning Tree Protocol
–– STP, IEEE 802.1D Spanning Tree Protocol
–– RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
–– MSTP, IEEE 802.1s Multiple Spanning Tree Protocol,
spanning tree by VLAN
PoE PD Alive-checking
STEP1
STEP2
PT PoE Camera
–– BPDU Guard
STEP3
PT PoE Camera
No Response!
Ping Request
ON
Ping Request
Check alive status for 3 times
• Supports Link Aggregation
–– 802.3ad Link Aggregation Control Protocol (LACP)
PoE
OFF
Restart PoE device without response
–– Cisco ether-channel (Static Trunk)
–– Maximum 10 trunk groups, up to 16 ports per trunk
group
Schedule Power Recycle
–– Up to 32Gbps bandwidth (Full Duplex Mode)
The WGSW-24040HP series allows each of the connected PoE IP cameras to reboot
• Provides Port Mirror (many-to-1)
in a specific time each week. Therefore, it will reduce the chance of IP camera crash
• Port Mirroring to monitor the incoming or outgoing traffic
resulting from buffer overflow.
on a particular port
• Loop protection to avoid broadcast loops
SMTP/SNMP Trap Event alert
Though most NVR or camera management software offers SMTP email alert function,
the WGSW-24040HPs further provides event alert function to help to diagnose the
Quality of Service
abnormal device owing to whether the network connection break, lost of PoE power or
• Ingress Shaper and Egress Rate Limit per port bandwidth
the rebooting response by PD Alice Check process.
control
• 8 priority queues on all switch ports
PoE Schedule for Energy Saving
Under the trend of energy saving worldwide and contributing to environmental
• Traffic classification:
protection, the WGSW-24040HP series can effectively control the power supply besides
–– IEEE 802.1p CoS
its capability of giving high watts power. The “PoE schedule” function helps you to
–– TOS / DSCP / IP Precedence of IPv4/IPv6 packets
enable or disable PoE power feeding for each PoE port during specified time intervals
–– IP TCP/UDP port number
and it is a powerful function to help SMB or Enterprise save power and money.
–– Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS
policies
• Supports QoS and In/Out bandwidth control on each port
8AM
5PM
5PM
8AM
• Traffic-policing policies on the switch port
• DSCP remarking
PoE
PoE
PoE
PoE
PoE
PoE
PoE
PoE
Multicast
Power
On
Power
On
Power
On
Power
On
6 Watts
6 Watts
12 Watts
12 Watts
Total consumption of 36 watts / hr
Power
Off
Power
Off
Power
Off
Power
On
6 Watts
6 Watts
12 Watts
12 Watts
Save 24 watts / hr during off-business hours
Total Saved = 10800 watts / month
PoE
1000Base-T UTP with PoE
• Supports IGMP Snooping v1, v2 and v3
• Supports MLD Snooping v1 and v2
• Querier mode support
2
WGSW-24040HPx
Cost-effective IPv6 Managed Gigabit Switch Solution for SMB
Faced with the increasingly large number of IP cameras and Wireless APs
being installed and deployed in all kinds of applications, more and more network
• IGMP Snooping port filtering
equipment start to support IPv6 protocol for next generation networking. To fulfill
• MLD Snooping port filtering
the IPv6 management demand, the WGSW-24040HP series works with the original
IPv4 network structure, and also supports the new IPv6 network structure. With
easy and friendly management interfaces and plenty of management functions
• Multicast VLAN Registration (MVR) support
included, the WGSW-24040HP series is the best choice for SMB, and IP
Security
Surveillance and wireless service providers to connect with IPv6 network.
• IEEE 802.1x Port-Based / MAC-Based network access
Efficient Management
For efficient management, the WGSW-24040HP managed switch series is equipped
with console, web and SNMP management interfaces. With the built-in web-based
management interface, the WGSW-24040HP series offers an easy-to-use, platform
authentication
• Built-in RADIUS client to co-operate with the RADIUS
servers
• TACACS+ login users access authentication
independent management and configuration facility. The WGSW-24040HP series
• RADIUS / TACACS+ users access authentication
supports SNMP and it can be managed via any based on standard of SNMP v1 and
• IP-based Access Control List (ACL)
v2 management software. For text-based management mode, the WGSW-24040HP
• MAC-based Access Control List
can be accessed via Telnet and the console port. Moreover, the WGSW-24040HP
series offers remote secure management by supporting SSH, SSL and SNMPv3
connection which can be encrypted the packet content at each session.
Robust Layer2 Features
• Source MAC / IP address binding
• DHCP Snooping to filter un-trusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
The WGSW-24040HP series can be programmed for advanced switch management
• IP Source Guard prevents IP spoofing attacks
function, such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN,
• Auto DoS rule to defend DoS attack
rapid spanning tree protocol, layer2 to layer4 QoS, bandwidth control and IGMP/
• IP address access management to prevent unauthorized
MLD snooping. The WGSW-24040HP series provides 802.1Q tagged VLAN and
the VLAN groups allowed will be maximally up to 255. The WGSW-24040HP not
only allows the operation of a high-speed trunk combining multiple ports, but also
supports connection fail-over.
intruder
Management
• Switch Management Interfaces
Powerful Security
–– Console / Telnet Command Line Interface
The WGSW-24040HP series offers comprehensive layer2 to layer4 access control
–– Web switch management
list (ACL) for enforcing security to the edge. It can be used to restrict to network
access by denying packets based on source and destination IP address, TCP/
UDP port number or defined typical network applications. Its protection mechanism
–– SNMP v1, v2c, and v3 switch management
–– SSH / SSL secure access
also comprises 802.1x Port-based and MAC-based user and device authentication.
• Four RMON groups (history, statistics, alarms, and events)
With the private VLAN function, communication between edge ports can be
• IPv6 IP Address / NTP / DNS management
prevented to ensure user privacy. The WGSW-24040HP series also provides DHCP
• Built-in Trivial File Transfer Protocol (TFTP) client
Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP
• BOOTP and DHCP for IP address assignment
snooping from attack and discard ARP packets with invalid MAC address. The
network administrator can now construct highly secured corporate networks with
considerably less time and effort than before.
• Firmware upload/download via HTTP / TFTP
• DHCP Relay
• DHCP Option82
Flexible and Extendable Solution
• User Privilege levels control
The four mini-GBIC slots built in the WGSW-24040HP series supports dual
• NTP (Network Time Protocol)
speed that 100Base-FX and 1000Base-SX/LX SFP (Small Form-factor Pluggable)
• Link Layer Discovery Protocol (LLDP) Protocol
fiber-optic modules. Now the administrator can flexibly choose the suitable
• Cable Diagnostic technology provides the mechanism to
SFP transceiver according to not only the transmission distance, but also the
transmission speed required. The distance can be extended from 550 meters to
2km (Multi-Mode fiber) up to above 10/20/30/40/50/70/120 kilometers (Single-Mode
fiber or WDM fiber). They are well suited for applications within the enterprise data
centers and distributions.
detect and report potential cabling issues
• Reset button for system reboot or reset to factory default
• PLANET Smart Discovery Utility for deploy management
• ICMPv6
3
WGSW-24040HPx
Application
Perfect Integration Solution for IP PoE Camera and NVR System
The WGSW-24040HP series brings an ideal secure surveillance system at a lower total cost. It provides 24 10/100/1000Mbps 802.3at PoE ports with
4-port Gigabit TP/SFP Combo interfaces, offering sufficient PoE power for a maximum of 24 IEEE 802.3af PoE IP cameras at the same time.
With 4-port Gigabit TP/SFP Combo interfaces, the WGSW-24040HP series supports connection to three 8-Channel NVR systems to receive stream from
20 cameras and also to backbone switch from an uplink port, and then access to control center. With its high performance switch architecture, the recorded
video files from the 20 IEEE 802.3af PoE IP camera devices can be saved in the NVR systems, which can be controlled and monitored both in the local
LAN and the remote site via Internet.
22 PoE IP Cameras
PoE
PoE
PoE
PoE
PoE
PoE
PoE
PoE
WGSW-24040HP Series
1000
Uplink
1000
1000BASE-SX/LX Fiber-optic
1000BASE-T UTP
PoE
1000BASE-T UTP with PoE
NVR
Control and Monitoring Center
IP Office Department / Workgroup PoE Switch
As the business expands, the additional telephones required could be installed at less cost via the implementation of PoE IP telephony system than that
of the traditional circuit wiring telephony system. The WGSW-24040HP series helps enterprises to efficiently create an integrated data, voice, and powered
VoIP network. PLANET IEEE 802.3af compliant IP phones can be installed without any power cable because it can be powered via the standard Ethernet
cable from the connected WGSW-24040HP series. With the WGSW-24040HP series, IP telephony deployment becomes more reliable and cost effective,
which helps enterprises save tremendous cost when upgrading from the traditional telephony system to IP telephony communications infrastructure.
PoE IP
Camera
PC Group
WGSW-24040HP
Series
1000
PoE
N
N
PoE
Laptop
PoE Wireless AP
PoE VoIP
Phone
Core
Switch
PoE
WGSW-24040HP
Series
PoE
Phone
1000
PoE VoIP ATA
100Base-TX UTP
PoE
DC
100Base-TX UTP w PoE
PoE
Power Line (DC)
DC
Telephone wire
1000
1000Base-SX/LX Fiber-optic
PTZ Camera
802.3at splitter
4
WGSW-24040HPx
IP Office Backbone PoE Switch
Providing up to 24 PoE, in-line power interfaces or providing up to 20 PoE, in-line power interfaces and 4 gigabit TP/SFP combo interfaces, the WGSW24040HP series can easily build a power centrally controlled IP phone system, IP camera system, or wireless AP group for the enterprises. For instance, IP
cameras or wireless APs can be easily installed in the company for surveillance demands or building a wireless roaming environment in the office. Without
the power socket limitation, the WGSW-24040HP series makes the deployment of IP cameras or Wireless LAN AP easier and more efficient. The 4 gigabit
TP/SFP combo interfaces in the WGSW-24040HP series also offers flexible Gigabit TP or fiber connection for uplink to public server groups.
PoE IP Camera
PoE Wireless Access Point
11n AP with Gigabit LAN Port
PoE
PoE
PoE
PoE
N
N
N
N
PoE
Laptop
WiFi-Phone
PDA
Laptop
Port Security
IP/MAC ACL
Internet
Router
WGSW-24040HP Series
Managed PoE Switch
SMB PoE IP office
Public/Server Groups
PoE VoIP Phone
Management Client
PoE
PoE
Gigabit
Switch
PoE
SSL / Telnet /Web
IP PBX
Data Server
P
IP DSCP QoS
Printer Server
PoE usage status
100BASE-TX UTP with PoE
PoE
1000BASE-T UTP
100BASE-TX UTP
N
2.4GHz 802.11n
5
WGSW-24040HPx
Specifications
WGSW-24040HP
Product
WGSW-24040HP4
Hardware Specification
Copper Ports
24 10/100/1000Base-T RJ-45 Auto-MDI/MDI-X ports
10/100/1000Mbps / SFP Combo Interfaces
4 10/100/1000Mbps TP and SFP shared combo interfaces, SFP(Mini-GBIC) supports 100/1000Mbps Dual mode
DDM, shared with Port-21 to Port-24
Console
1 x RS-232 DB9 serial port (115200, 8, N, 1)
Switch Architecture
Store-and-Forward
Switch Fabric
48Gbps/non-blocking
Throughput
35.7Mpps@64Bytes
Address Table
8K entries, automatic source address learning and ageing
Share Data Buffer
4 megabits
Flow Control
IEEE 802.3x Pause Frame for Full-Duplex
Back pressure for Half-Duplex
Jumbo Frame
9K bytes
Reset Button
< 5 sec: System reboot
> 5 sec: Factory Default
LED
System:
Power (Green)
WGSW-24040HP Alert:
FAN1 (Green), FAN2 (Green), PWR (Green)
WGSW-24040HP4 Alert:
FAN1 (Green), FAN2 (Green), FAN3 (Green), PWR (Green)
PoE Ethernet Interfaces (Port 1 to Port 24):
LNK/ACT (10/100/1000Mbps, Green), PoE In-Use (Orange)
100/1000Mbps SFP Combo Interfaces (Port 21 to Port 24):
1000 (LNK/ACT, Green), 100 (LNK/ACT, Orange)
Power Requirements
100~240V AC, 50/60Hz, 4A
100~240V AC, 50/60Hz, 6A
Power Consumption (Full Load)
262 watts
482 watts
ESD Protection
6KV DC
Power over Ethernet
PoE Standard
IEEE 802.3at/IEEE 802.3af Power over Ethernet / PSE
PoE Power Supply Type
End-Span
PoE Power Output
Per Port 56V DC, 590mA . Max. 30.8 watts
Power Pin Assignment
1/2(+), 3/6(-)
PoE Power Budget
PoE Ability
220 watts
440 watts max.
PD @ 7 watts
24 units
24 units
PD @ 15.4 watts
14 units
24 units
PD @ 30.8 watts
7 units
14 units
Layer2 Management Function
Basic Management Interfaces
Console, Telnet, Web Browser, SNMP v1, v2c
Secure Management Interfaces
SSH, SSL, SNMP v3
Port Configuration
Port disable/enable
Auto-Negotiation 10/100/1000Mbps full and half duplex mode selection
Flow Control disable/enable
Port Status
Display each port’s speed duplex mode, link status, Flow control status, Auto negotiation status, trunk status
Port Mirroring
TX/RX/Both
Many-to-1 monitor
VLAN
802.1Q Tagged based VLAN, up to 255 VLAN groups
Q-in-Q tunneling
Private VLAN Edge (PVE)
MAC-based VLAN
Protocol-based VLAN
Voice VLAN
MVR (Multicast VLAN Registration)
Up to 255 VLAN groups, out of 4094 VLAN IDs
Link Aggregation
IEEE 802.3ad LACP/Static Trunk
Supports 10 groups of 16-Port trunk
6
WGSW-24040HPx
QoS
IGMP Snooping
MLD Snooping
Access Control List
Traffic classification based, Strict priority and WRR
8-Level priority for switching
- Port Number
- 802.1p priority
- 802.1Q VLAN tag
- DSCP/TOS field in IP Packet
IGMP (v1/v2/v3) Snooping, up to 255 multicast groups
IGMP Querier mode support
MLD (v1/v2) Snooping, up to 255 multicast groups
MLD Querier mode support
IP-based ACL/MAC-based ACL
Up to 256 entries
Bandwidth Control
Per port bandwidth control
Ingress: 500Kb~80Mbps
Egress: 64Kb~80Mbps
SNMP MIBs
RFC-1213 MIB-II
IF-MIB
RFC-1493 Bridge MIB
RFC-1643 Ethernet MIB
RFC-2863 Interface MIB
RFC-2665 Ether-Like MIB
RFC-2819 RMON MIB (Group 1, 2, 3 and 9)
RFC-2737 Entity MIB
RFC-2618 RADIUS Client MIB
RFC-3411 SNMP-Frameworks-MIB
IEEE 802.1X PAE
LLDP
MAU-MIB
PoE-Ethernet MIB
Standards Conformance
Regulation Compliance
FCC Part 15 Class A, CE
Standards Compliance
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX/100Base-FX
IEEE 802.3z 1000Base-SX/LX
IEEE 802.3ab 1000Base-T
IEEE 802.3x Flow Control and Back pressure
IEEE 802.3ad Port trunk with LACP
IEEE 802.1D Spanning tree protocol
IEEE 802.1w Rapid spanning tree protocol
IEEE 802.1s Multiple spanning tree protocol
IEEE 802.1p Class of service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet PLUS
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP version 1
RFC 2236 IGMP version 2
RFC 3376 IGMP version 3
RFC 2710 MLD version 1
FRC 3810 MLD version 2
Ordering Information
WGSW-24040HP
24-Port 10/100/1000Mbps 802.3at PoE with 4 shared SFP Managed Switch
WGSW-24040HP4
24-Port 10/100/1000Mbps 802.3at PoE with 4 shared SFP Managed Switch (440Watts)
7
WGSW-24040HPx
Available Modules for WGSW-24040HP series
MGB-GT
SFP-Port 1000Base-T Module
MGB-SX
SFP-Port 1000Base-SX mini-GBIC module
MGB-LX
SFP-Port 1000Base-LX mini-GBIC module
MGB-L30
SFP-Port 1000Base-LX mini-GBIC module-30km
MGB-L50
SFP-Port 1000Base-LX mini-GBIC module-50km
MGB-L70
SFP-Port 1000Base-LX mini-GBIC module-70km
MGB-L120
SFP-Port 1000Base-LX mini-GBIC module-120km
MGB-LA10
SFP-Port 1000Base-LX (WDM,TX:1310nm) mini-GBIC module-10km
MGB-LB10
SFP-Port 1000Base-LX (WDM,TX:1550nm) mini-GBIC module-10km
MGB-LA20
SFP-Port 1000Base-LX (WDM,TX:1310nm) mini-GBIC module-20km
MGB-LB20
SFP-Port 1000Base-LX (WDM,TX:1550nm) mini-GBIC module-20km
MGB-LA40
SFP-Port 1000Base-LX (WDM,TX:1310nm) mini-GBIC module-40km
MGB-LB40
SFP-Port 1000Base-LX (WDM,TX:1550nm) mini-GBIC module-40km
MFB-FX
SFP-Port 100Base-FX Transceiver (1310nm)-2km
MFB-F20
SFP-Port 100Base-FX Transceiver (1310nm)-20km
MFB-F40
SFP-Port 100Base-FX Transceiver (1310nm)-40km
MFB-F60
SFP-Port 100Base-FX Transceiver (1310nm)-60km
MFB-FA20
SFP-Port 100Base-BX Transceiver (WDM,TX:1310nm)-20km
MFB-FB20
SFP-Port 100Base-BX Transceiver (WDM,TX:1550nm)-20km
Related PoE Products
ICA-2200
Full HD PoE Box IP Camera
ICA-2500
5 Mega-Pixel PoE Box IP Camera
ICA-3350V
3 Mega-Pixel Vari-Focal Bullet IR IP Camera
ICA-5350V
3 Mega-Pixel Vandalproof IR IP Camera
ICA-HM101
2 Mega-Pixel PoE Cube IP Camera
ICA-HM126
H.264 Full HD Box IP Camera
ICA-HM127
3 Mega-Pixel H.264 Box IP Camera
ICA-HM131
H.264 Full-HD Fixed Dome IP Camera
ICA-HM131R
H.264 Real Time Full-HD Fixed Dome IP Camera
ICA-HM132
H.264 2 Mega-Pixel 20M IR Vari-Focal Dome IP Camera
ICA-HM136
H.264 2 Mega-Pixel 20M IR Vandalproof Dome IP Camera
ICA-HM312
2 Mega-Pixel 25M IR Outdoor Bullet PoE IP Camera
ICA-HM316
2 Mega-Pixel Outdoor IR PoE IP Camera
ICA-HM351
2 Mega-Pixel 35M IR Outdoor Box PoE IP Camera
ICA-HM620
2 Mega-Pixel PoE Plus Speed Dome Internet Camera
POE-152S
IEEE 802.3af Power over Ethernet Splitter
POE-162S
IEEE 802.3at Gigabit High Power over Ethernet Splitter
POE-E101
IEEE 802.3af Power over Ethernet Extender
POE-E201
IEEE 802.3at Power over Ethernet Extender
WNAP-C3220
802.11n Wireless Ceiling Mount PoE Access Point
WNAP-1120PE
802.11n Wireless Access Point with PoE
WNAP-6350
2.4GHz 300Mbps 802.11b/g/n Wireless Outdoor Access Point
WNAP-7350
5GHz 300Mbps 802.11a/n Wireless Outdoor Access Point
VIP-254PT
802.3af PoE SIP IP Phone
VIP-255PT
Multi–Language PoE IP Phone
VIP-256PT
802.3af PoE SIP IP Phone
VIP-360PT
Business PoE IP Phone
VIP-361PE
Professional PoE IP Phone (5-Line)
VIP-560PE
Professional PoE IP Phone with Expansion Function
VIP-560PT
Professional PoE IP Phone
ICF-1700
Touch Screen Internet Multimedia Phone
PLANET Technology Corporation
11F., No.96, Minquan Rd., Xindian Dist., New Taipei City
231, Taiwan (R.O.C.)
Tel: 886-2-2219-9518 Fax: 886-2-2219-9528
Email: sales@planet.com.tw www.planet.com.tw
WGSW-24040HPx
PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of
their respective owners. Copyright © 2013 PLANET Technology Corp. All rights reserved.
8
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising