CompaCt traCk Loaders
C175 C185 C190
Compact Track Loaders
• High-Productivity Super Boom® Design
• Track Flotation and Stability
• Best-in-Class Cab Comfort
• Easy Service Access and Attachment Changes
• Superior All-Around Visibility
• Comfortable, Easy-To-Operate Controls
LIFTING PERFORMANCE
WITH THE UNMATCHED
STABILITY OF TRACKS
New Holland compact track loaders combine the best
performance advantages into one machine. You get the
superior reach and lift capacity of the exclusive Super
Boom® lift arm design along with the superior flotation,
traction, and stability of tracks.
The patented Super Boom® design advantages
• Vertical lift linkage liftsthe load up for outstanding
froward reach and dump height
• Low center of gravity reduces tipping and increases
lift capacity
• No rear frame towers allow for industry-leading rear
visibility
The advantages of wide, durable tracks
• Improved traction in loose, sandy, or muddy
conditions means you can push heavier loads
• Low ground pressure gives you maximum flotation
and minimum soil disturbance
• A wide stance improves stability and offers a
smoother ride
• Superior stability and traction allow for faster travel
speeds, even over rough ground
2
Model C175 features a 12.6-inch track. Models
C185 and C190 are available with two track options:
• 15.7-inch track—excellent flotation with
additional traction
• 17.7-inch track—maximum flotation for
sensitive turf
Unmatched Stability
New Holland Super Boom Compact Track Loaders give
operators added confidence by providing a smooth ride
over uneven terrain and inclines. This added stability,
control, and confidence will keep your operators on
schedule.
With Super Boom® vertical lift
linkage, the higher you lift the
load, the farther forward you
reach, achieving outstanding
dump height and reach.
Rated Operating Capacity
C175
C185
C190
50% Tipping, lbs (kg)
3,150 (1429)
3,643 (1652)
4,143 (1879)
35% Tipping, lbs (kg)
2,200 (998)
2,550 (1134)
2,900 (1315)
Tipping Load, lbs (kg)
6,300 (2858)
7,286 (3305)
8,286 (3758)
Dump clearance at full height, in (mm)
95.4 (2424)
103.4 (2627)
102.6 (2606)
Dump reach at full height, in (mm)
30.2 (768)
33.1 (840)
34.4 (874)
The ultimate high-performance machines for construction, utility, and
grounds maintenance work. See one firsthand at your New Holland
equipment dealer.
New Holland’s Super Boom loader design
provides excellent visibility out the large rear
window. With a clear view out the large back
window, operators can enjoy unobstructed
visibility.
3
LESS COMPONENTS, PLUS FEWER MOVING PARTS EQUALS
LOWER OPERATING COST
Standard Two-Speed
allows for greater speed
variations to perform a
wide variety of jobs.
The rigid track frame with fewer moving parts reduces maintenance costs
compared to suspension track systems.
Rigid Frame with fewer
moving parts means reduced
cost of ownership compared
to suspension track systems.
Tapered Track
Frame sheds mud
and any other
material to keep the
track system clean.
Elevated Drive Sprocket
increases component life by
keeping the motor assembly
out of material and moisture.
Easy Track Adjustment
using a standard wrench
and grease gun makes for
quick and easy service.
Steel Embedded Track
Cables and Cross Bars
resist stretching while
transferring the power of the
drive train through the track
and to the ground.
New Holland Crawler
Technology incorporates
metal face seals into rollers
and idlers.
Undercarriage shown is available on the C185 & C190.
4
Crawler-Style Rollers help
prevent de-tracking on inclines
by using a larger inner diameter
flange positioned between the
track tabs.
Large Brass Bushings
distribute load better
than bearings and offer
resilience and longevity.
Sealed and
Oil Lubricated
Rollers & Idlers.
Single Flange Front
and Rear Idlers help
prevent de-tracking
on inclines.
RUGGED, SIMPLE
UNDERCARRIAGE
DESIGN
Super Boom® compact track loaders are built with
New Holland crawler technology to withstand the
toughest conditions and the most challenging
workloads. The undercarriage design is simple, yet
rugged, giving you a stable ride over rough working
surfaces.
Robust undercarriage components
• Strong, steel-belted rubber track
• Oil lubricated rollers and idlers
• Spring belt tensioner with grease gun adjustment
Standard, two-speed transmission at your command
• Low speed for pushing into a pile
• High speed for traveling at up to eight miles
per hour
B
A
The combined gearbox (A) and motor (B) help maximize power
output to the tracks. (C185 & C190 motor shown)
5
RESPONSIVE POWER AND
FAST MAINTENANCE
New Holland compact track loaders allow you to power
through tough conditions and deliver the fast response
you need when performing multi-function tasks. Plus, fast
maintenance makes it easier for your operators to stay on
schedule.
Proven engine power
• Outstanding torque rise and horsepower
• Clean-burning engine with reduced emissions
• Excellent fuel economy
• High-cooling-capacity radiator
Quick-response hydraulics
• In-line hydrostatic pumps
• Smooth, quiet operation
• Fast ground speeds
• Quick cycle times
• Fast-action hydraulic cylinders reduce cycle times
Key support from the factory
• One-year or 2,000-hour Standard Full-Machine Warranty
Time-saving maintenance
New Holland compact track loaders lower your operating costs with fast, easy servicing. You can reach all major service points—
even with the boom down. Rear access door provides quick and easy access to check engine oil, hydraulic oil, radiator coolant
and fuel fill. Routine air filter maintenance is simple with an easy to reach, side-out element. If major repairs are ever necessary,
the entire boom and cab assembly lifts up and tilts forward for unobstructed engine and transmission access.
6
New Holland Compact Track
Loaders are US EPA Tier III
certified for low emissions.
C175
C185
C190
Gross, hp (kW)
60 (45) @ 2900 rpm
82 (61) @ 2500 rpm
90 (67) @ 2300 rpm
Net, hp (kW)
56 (42) @ 2900 rpm
77 (57) @ 2500 rpm
83 (62) @ 2300 rpm
7,535 (3418)*
9,100 (4128)**
9,820 (4454)**
Bucket, lbs (kg)
4,312 (1956)
7,670 (3479)
7,670 (3479)
Boom, lbs (kg)
3,003 (1362)
4,836 (2194)
6,229 (2825)
Horsepower
Operating Weight, lbs (kg)
Breakout Force
*Base unit plus full fuel tank, 165 lbs (75 kg) operator, 72" dirt and foundry bucket, and 12.6" (320 mm) track belt width
**Base unit plus full fuel tank, 165 lbs (75 kg) operator, 84" dirt and foundry bucket, and 17.7" (450 mm) track belt width
7
A New Point of View
The New Holland operator platform and optional
deluxe cab enclosure expand your view of the world,
while expanding your work site efficiency. You’ll appreciate the added dimensions, visibility and comfort.
Superior visibility
• The sight lines rearward are the best in the industry
due to the large rear window, sloping engine hood,
and the lack of rear frame towers
• The boom’s low front cross member provides an
unobstructed view to the bucket’s cutting edge
• The curved door of the enclosed cab features more
glass for an outstanding view
• The deluxe cab enclosure includes an appropriately
positioned windshield wiper for a clearer view in all
conditions
• Front lights are positioned at the side of the cab to
expand your forward view, especially to the upper
corners, making it easier to position loads overhead
and maneuver in low-clearance areas
A clean, quiet environment
• The cab sealing reduces dust infiltration
• Full-covering and noise-absorbing trim results in
quieter interior sound levels
• An optional sound suppression package reduces
noise levels by up to three decibels for an even
quieter operator environment
• A heater/defroster kit and optional air conditioning
allows you to control the climate in any weather
• A huge glass door opens a full 90 degrees for easy
entry and exit
• A demolition door is available in lieu of a glass
door for rugged working conditions
The see-through area on the cab roof provides a clear
view to the bucket, even when it is positioned at full
height.
8
Stay cool and refreshed by adding our optional Deluxe Cab
with optional air conditioning or heat or both.
COMFORT,
CONVENIENCE,
AND VERSATILITY
Operator efficiency begins with operator comfort,
and operators get easy control and comfort without
compromise in the New Holland operator platform.
The most comfortable, stable ride on the market
• A low center of gravity and a wider stance than
competitive machines results in optimum stability
and a smoother ride
• Contoured suspension seat provides deluxe
operator comfort
Easy operation
Optional pilot control precision
New Holland gives you the choice of standard mechanical
controls or the optional pilot control system for added precision,
comfort and productivity. The left joystick controls steering and
forward/reverse travel while the right joystick controls the lift arm
and attachment tilt. These low-effort joysticks, when combined
with the suspension seat and the superior support of the long,
contoured adjustable armrests, give you instant response with
minimum movement for extremely precise control and less
fatigue. The hand throttle is conveniently located to your right,
allowing you to simultaneously drive with the left stick, while
adjusting engine speed with your right hand or you can simply
use the foot throttle.
• Conveniently placed controls require minimum effort
• Foot controls respond quickly and feature
adjustable pedal position
• A fingertip control allows for easy changes between
low and high speed
• State-of-the-art, electronic instrument control (EIC)
panel is easy to read at a glance
• Spring-applied, hydraulic-released (SAHR) parking
brakes engage with the push of a button
• Advanced Instrument Panel provides additional
diagnostic tools, fault indicators, engine shut-down
protection and security code lockout
9
MORE ATTACHMENTS,
MORE VERSATILITY
Whatever you need to do – dig, lift, hammer, trench,
plane, mow, sweep, rake or drill – there’s a New Holland
attachment that will get the job done.
Built for multi-tasking
• Pick Up ’N Go™ universal attaching system allows for
easy hookup to New Holland attachments as well as
most competitive-brand attachments
• New Holland attachments are performance-matched to
New Holland compact track loaders
Examples of hard-working attachments available
• Low Profile Bucket
• Dirt & Foundry Bucket
• Manure/Slurry Bucket
• Rock Bucket
• Brush Grapple
• Scrap Grapple
• Root Rake
• Heavy-duty Backhoe
• Mini Backhoe
• Skid Hoe
• Pallet Forks
• Concrete Claw
• Lift Boom
• Farm Forks/Grapple
• Silage Defacer
• Bale Handler
• Preparator
• Grading Rake
• Dozer Blade
• Push Broom
• Angle Broom
10
• Pick-up Broom
• Snow Blower
• Snow Blade
• Snow Bucket
• Trencher
• Rock Saw
• Cold Planer
• Vibrator Roller
• Concrete Chuter
• Silt Fence Installer
• Hydraulic Hammer
• Tree Shovel
• Log Grapple
• Tree Spade
• Chipper
• Earth Drill
• Rotary Mower
• Post Driver
• Post Puller
• And more!
Attachment changes without leaving the seat
Add the optional hydraulic mount plate and you can
attach or remove buckets and attachments using a
rocker switch from the operator compartment—no
need to leave your seat!
11
C175 C185 C190
Dimensions & Bucket Selection
Dimensions
76°
B
L
D
i
F
C
e
m N
J
G
A
TOP VIEW
k
H
A. Angle of departure
B. Dump angle (maximum)
C175
C185
C190
32°
29°
28°
43°
C. Dump height (SAE), in (mm)
95.4
D. Dump reach @ maximum height (SAE), in (mm)
E. Height, in (mm)
F. Height to hinge pin, in (mm)
G. Ground clearance, in (mm)
45°
(2,424)
103.4
30.2
(768)
75.9
(1,929)
119.7
(3,041)
45°
(2,627)
102.6
(2,606)
33.1
(840)
34.4
(874)
80.1
(2,036)
80.1
(2,036)
128.3
(3,258)
127.4
(3,237)
8.3
(212)
10.4
(264)
10.4
(264)
H. Length with bucket, in (mm)
129.7
(3,293)
141.2
(3,587)
148.2
(3,764)
I.
146.4
(3,717 )
152
(3,861)
152.7
Operating height (maximum), in (mm)
J. Rollback angle (at carry position)
35°
(3,878)
36°
39°
K. Track on ground length, in (mm)
54.9
(1,394)
64.7
(1,643)
64.7
(1,643)
L. Circle clearance, in (mm)
138.9
(3,528)
158.2
(2,164)
161
(4,089)
M. Track gauge, in (mm)
58
(1,472)
64.8
(1,647)
64.8
(1,647)
N. Width, in (mm)
70.6 (1,792)
with 12.6 (320) track
82.6 (2,097)
with 17.7 (450) track
82.6 (2,097)
with 17.7 (450) track
Equipped with Dirt & Foundry Buckets
Buckets
C175
72" (1829 mm) Dirt/Foundry
X
78" (1981 mm) Dirt/Foundry
X
84" (2134 mm) Dirt/Foundry
72" (1829 mm) Low Profile (heavy duty)
72" (1829 mm) Low Profile (extended)
X
78" (1981 mm) Low Profile (extended)
X
84" (2134 mm) Low Profile (extended)
72" (1829 mm) Light Material
X
84" (2134 mm) Light Material
X
72" (1829 mm) Manure/Fertilizer
X
12
C190
X
X
X
X
X
84" (2134 mm) Low Profile (heavy duty)
84" (2134 mm) Manure/Fertilizer
C185
SAE Heaped Capacity
SAE Struck Capacity
Weight
ft3
(m3)
ft3
(m3)
lb
(kg)
16.7
(.45)
12.7
(.34)
390
(177)
18.4
(.52)
13.8
(.39)
435
(197)
21.9
(.62)
18
(.51)
450
(204)
14.6
(.41)
12.5
(.35)
501
(227)
17.3
(.48)
12.4
(.35)
552
(250)
17.1
(.48)
12.2
(.35)
477
(216)
18.6
(.52)
13.2
(.37)
502
(227)
X
X
20.1
(.57)
14.1
(.40)
608
(276)
23.7
(.65)
19.0
(.52)
435
(197)
X
X
27.9
(.79)
22.3
(.64)
500
(227)
19.1
(.54)
15.5
(.42)
465
(211)
22.5
(.64)
18.2
(.52)
540
(245)
X
X
C175 C185 C190
Specifications
CAPACITIES
Cooling system, gal (L)
Engine crankcase (w/filter), qt (L)
C175
C185
C190
3 (11.4)
3 (11.4)
4.5 (17)
8.4 (8.0)
9 (8.5)
11.6 (11)
Fuel tank, gal (L)
16.3 (61.7)
22.9 (86.7)
26.5 (100)
Hydraulic oil system, gal (L)
8.6 (32.6)
15 (56.8)
15 (56.8)
C175
C185
C190
7,535 (3418)*
9,100 (4128)**
9,820 (4454)**
performance
OPERATING WEIGHT:
SAE, lbs (kg)
OPERATING LOAD:
50% of tipping load, lbs (kg)
3,150 (1429)
3,643 (1652)
4,143 (1879)
35% of tipping load, lbs (kg)
2,200 (998)
2,550 (1157)
2,900 (1315)
Hydraulic limitation, lbs (kg)
2,200 (998)
2,850 (1293)
3,700 (1678)
6,300 (2858)
7,286 (3305)
8,286 (3758)
SAE Bucket breakout force, lbs (kg)
4,312 (1,956)
7,670 (3,479)
7,670 (3,479)
SAE Boom breakout force, lbs (kg)
3,003 (1,362)
4,836 (2,194)
6,229 (2,825)
TIPPING LOAD:
Without weights per SAE J-732, lbs (kg)
BREAKOUT FORCE:
CYCLE TIMES:
Raising time (with SAE operating load), sec
3.1
2.8
3.3
Dumping time (with SAE operating load), sec
2.3
1.8
1.8
Lowering time (empty), sec
2.1
2.5
3.1
Retract time (empty), sec
1.5
1.6
1.6
9
8.7
9.8
Total boom-cycle time, sec
GROUND SPEED MAX:
Low Range, mph (km/h)
5.6 (9)
5.4 (8.7)
5.1 (8.2)
High Range, mph (km/h)
7.4 (12)
8.6 (13.8)
8.0 (12.9)
*Base unit plus full fuel tank, 165 lbs (75 kg) operator, 72" dirt and foundry bucket, and 12.6" (320 mm) track belt width
**Base unit plus full fuel tank, 165 lbs (75 kg) operator, 84" dirt and foundry bucket, and 17.7" (450 mm) track belt width
undercarriage
System
Idlers / Rollers per side
C175
C185
C190
High drive offset tread pattern
High drive offset tread pattern
High drive offset tread pattern
2/3
2/4
2/4
Ground Pressure:
12.6" (320 mm) belt, psi
5.4
—
—
15.7" (400 mm) belt, psi
—
4.5
4.8
17.7" (450 mm) belt, psi
—
4.0
4.3
C175
C185
C190
Hydrostatic piston type pumps
displacement, in3 (cc)
2.48 (40.6)
2.81 (46)
2.81 (46)
Hydrostatic axial piston type motors at
maximum displacement, in3 (cc)
3.1 (50.8)
—
—
18.9 (310)
18.9 (310)
powertrain
Hydrostatic radial piston type motors with
maximum displacement, in3 (cc)
—
13
C175 C185 C190
Specifications
electrical
Alternator
Battery
System protection
C175
C185
C190
55 amp, solid-state rectifier and regulator
95 amp, solid-state rectifier and regulator
95 amp, solid-state rectifier and regulator
12-volt 650 CCA @ O°F (-18°C)
maintenance free
12-volt 1,125 CCA @ O°F (-18°C)
maintenance free
12-volt 1,125 CCA @ O°F (-18°C)
maintenance free
30 amp circuit breaker
30 amp circuit breaker
30 amp circuit breaker
INSTRUMENTS: Hour meter, voltage alarm, hydraulic oil temperature light and alarm, coolant temperature light and alarm, fuel gauge, transmission charge pressure light and alarm, engine oil
pressure light and alarm, seat belt light, engine malfunction light and alarm, transmission filter restriction light and alarm, parking brake reminder light
engine
Manufacturer
Model number
Air cleaner
Bore and stroke, in (mm)
Number of cylinders
Displacement, in3 (L)
Fuel Diesel
HORSEPOWER:
Gross, hp (kW)
SAE Net, hp (kW)
SPEEDS:
Fast, no load, rpm
Idle, no load, rpm
Peak torque, lb-ft (N•m)
Torque rise
C175
C185
C190
ISM
N844LT
Dual stage, dry element filter
3.3 x 3.9 (84 x 100)
4
135 (2.2)
Diesel
FPT
F5C E5454
Dual stage, dry element filter
3.89 x 4.09 (99 x 104)
4
195 (3.2)
Diesel
FPT
F4G E9454
Dual stage, dry element filter
4.1 x 5.2 (104 x 132)
4
274 (4.5)
Diesel
60 (45)
56 (42)
82 (61)
77 (57)
90 (67)
83 (62)
3140 +/- 40
1200 +/- 50
128 (173) @ 1,700 rpm
20%
2675 +/- 75
1075 +/- 50
229 (310) @ 1,400 rpm
32%
2415 +/- 60
1075 +/- 75
288 (390) @ 1,300 rpm
40%
C175
C185
C190
New Holland double acting
2.5 x 21.25 (63.5 x 540)
1.38 (35.1)
New Holland double acting
2.5 x 24.06 (63.5 x 611)
1.5 (38.1)
New Holland double acting
2.75 x 24.06 (70 x 611)
1.75 (44.5)
New Holland double acting
2.25 x 17.88 (57.2 x 454.2)
1.25 (31.8)
3-spool open center
5-micron, spin-on filter
Gear type 17.2
25.5
3.9 (14.8)
2,500 (172)
New Holland double acting
2.5 x 17.6 (64 x 447)
1.25 (31.8)
3-spool open center
6-micron, spin-on filter
Gear type 21.0
35.8
5 (18.9)
3,050 (210)
New Holland double acting
2.5 x 17.6 (64 x 447)
1.25 (31.8)
3-spool open center
6-micron, spin-on filter
Gear type 21.9
37.3
5 (18.9)
3,050 (210)
Hydraulics
BOOM CYLINDERS:
Make
Bore and stroke, in (mm)
Rod size, in (mm)
BUCKET CYLINDERS:
Make
Bore and stroke, in (mm)
Rod size, in (mm)
Control
Filtration
Hydraulic pump, gpm
High flow hydraulics (if equipped), gpm
Oil reservoir, gal (L)
Relief pressure setting, psi (bar)
14
C175 C185 C190
Base & Optional Equipment
BASE EQUIPMENT
OPTIONAL EQUIPMENT
CONTROLS
• Single battery with 650 CCA (C175)
ACCESSORIES
• Hand/Foot Controls
• Single battery with 1,125 CCA (C185 & C190)
• 15.7 inch track belt (C185 & C190)
ENGINE
• Transmission charge pressure light and alarm
• Air conditioning
• 4 Cylinders Turbocharged
• Transmission filter restriction light and alarm
• Bucket spill guard
• Block heater (C175)
• Voltage alarm
• Bucket tooth kit
• Dry Dual Element Air Cleaner
LIGHTING
• Cab enclosure
• Electric Key Shutoff
• Worklights (4 front headlights & 3 rear lights
including supplemental lighting for working in limited
light conditions)
• Cab jack kit
SERVICE
• Decal kits
• 50-hour lube interval
• Demolition kit
• Boom and cab tilting feature
• Fire extinguisher bracket kit
• Lift-up seat pan (no tools required)
• Floor cover plates
• Low-mounted fuel fill
• Four-way flashers/warning lights
• Rear engine door/top engine cover
• Hand controls
• Removable side engine panels (no tools required)
• Heater/defroster
SAFETY
• High-flow hydraulics
• Back-up alarm
• Hydraulic mount plate
• Horn
• Pilot controls
• Hydraulic lockout
• Rearview mirror
• Manual, in-cab boom lockouts
• SMV signs
• Retractable seatbelt
• Three-inch seatbelt
• ROPS operator area
• Top window
• Spring Applied Hydraulic Release (SAHR) brake
• Turn signals
• Grid Heater Cold Start Aid (C185 & C190)
• ISM N844LT (C175)
• FPT F5C E5454 (C185)
• FPT F4G E9454 (C190)
• Quick-start glow plugs (C175)
HYDRAULICS
• Boom Hydraulics
• Flat-face couplers
• Full-flow Hydraulic Cooler
• Gear-type, 17.2 gpm (C175)
• Gear-type, 21 gpm (C185)
• Gear-type, 21.9 gpm (C190)
• Three-spool, open-center control valve
TRANSMISSION
• Variable displacement axial piston pumps, axial piston motors (C175)
• Variable displacement axial piston pumps, radial piston motors (C185 & C190)
VANDAL PROTECTION
• Cab side window kit
• Warning Beacon (pre-wiring standard)
ELECTRICAL
• Enclosed fuel cap
• 12-volt system
• Enclosed hydraulic fill
• 30-amp circuit breaker
• Lockable engine cover and side panels
• 55-amp alternator (C175)
ACCESSORIES
• 95-amp alternator (C185 & C190)
• 12-volt accessory power plug
• Air cleaner restriction light and alarm
• Armrests
• Coolant temperature light and alarm
• Cab headliner
• Engine oil pressure light and alarm
• Suspension seat
• Fuel gauge
• Hour meter
• Rotating Beacon Pre-Wired (Rotating Beacon Optional)
• Hydraulic oil temperature light and alarm
• Advanced instrument panel with security lockout
• 72" Light Material (C175)
• Parking brake reminder light
• Remote jump-start terminal
• 84" Light Material (C185 & C190)
• Seat belt light
BUCKETS AND ATTACHMENTS
• 72" Dirt/Foundry (C175)
• 78" Dirt/Foundry (C175)
• 84" Dirt/Foundry (C185 & C190)
• 72" Low Profile (heavy duty) (C175)
• 84" Low Profile (heavy duty) (C185 & C190)
• 72" Low Profile (extended) (C175)
• 78" Low Profile (extended) (C175)
• 84" Low Profile (extended) (C185 & C190)
• 72" Manure/Fertilizer (C175)
• 84" Manure/Fertilizer (C185 & C190)
• Pallet forks
15
SUPER BOOM®
COMPACT TRACK
LOADERS
C175
Operating Weight
7,535 lbs (3418 kg)
Horsepower
Gross 60 hp (45 kW) @ 2,900 rpm
Rated operating capacity
50% tipping 3,150 lbs (1429 kg)
35% tipping 2,200 lbs (998 kg)
C185
Operating Weight
9,100 lbs. (4128 kg)
Horsepower
Gross 82 hp (61 kW) @ 2,550 rpm
Rated operating capacity
50% tipping 3,643 lbs (1652 kg)
35% tipping 2,500 lbs (1134 kg)
C190
Operating Weight
9,820 lbs. (4454 kg)
Horsepower
Gross 90 hp (67 kW) @ 2,300 rpm
Rated operating capacity
50% tipping 4,143 lbs (1879 kg)
35% tipping 2,900 lbs (1315 kg)
World Class Products Demand World Class Dealers
The purchase of a New Holland
Construction machine is just the
beginning of our relationship
together. Consider your
experienced New Holland
Construction Equipment dealer
as your local partner in
productivity. Assistance in
selecting the right model
for your operation and
developing an affordable
leasing or financing plan
through CNH Capital are
just a few advantages your
local dealer can provide.
Your New Holland Construction
dealer’s full service capabilities
bring you responsive support with
genuine New Holland parts and all
makes coverage. More importantly,
we are there wherever and
whenever you need us with our
fully equipped service vehicles.
From customized maintenance
programs to professional
operator and technical training, our factorytrained service and parts experts are there
to assist you with any of your equipment
support needs.
Your business deserves nothing less than world
class product, supported by a world class business partner.
That’s your New Holland Construction Equipment dealer–your partner in productivity.
New Holland Construction Equipment is backed with a 1-Year/Unlimited Hour Standard Warranty.
Use our dealer locator at www.newholland.com to find the dealer nearest you.
Design, materials and/or specifications are subject to change
without notice and without liability therefor. Specifications
are applicable to units sold in Canada, the United States, its
territories and possessions, and may vary outside these areas.
New Holland Construction
245 E. North Avenue
Carol Stream, IL 60188-2021
866-726-3396 Toll Free
630-260-4000
630-260-4304 Fax
© 2008 CNH America LLC. All rights reserved. New Holland is
a trademark of CNH America LLC. Any trademarks referred to
herein, in association with goods and/or services of companies
other than CNH America LLC, are the property of those espective
companies.
www.newholland.com
B. VERSIONE IN QUADRICROMIA (CMYK)
B. FOUR-COLOR (CMYK) VERSION
Fondo
Background
Cornice
Frame
Logotipo
Logo
Filetto
Line
Safety begins with a thorough understanding of
the equipment. Always make sure you and your
operators read the Operator’s Manual before
using the equipment. Pay close attention to all
safety and operating decals and never operate
machinery without all shields, protective
devices and structures in place.
STOCK #NHC11030802 • 1108XX • XXX • PRINTED IN U.S.A.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising