Delta-Q IC650 - Remy Battery
Available models:
24 V / 27 A
36 V / 18 A
48 V / 13.5 A
Delta-Q IC650
650 W Industrial Battery Charger
Capable of charging lead acid (wet, AGM, gel) and lithium battery chemistries, the IC650 Charger is available in on- and
off-board configurations. Optional CAN bus communication ensures seamless machine integration and AC/DC cabling is
completely customizable. Applications include: scissor lifts, lift trucks, floor care machines, and golf cars.
High Reliability
Easy to Integrate
Engineered using design for reliability.
Validated for long service life in worst-case
operating conditions. Tested to perform reliably
and durably in automotive applications.
Manufactured in a world class facility
specializing in high reliability solutions.
Assists machine troubleshooting with built-in
charge cycle tracking. Download data / upgrade
software through USB host port. Optional CAN
bus communication enables deep machine
integration, diagnostics and control.
Charge Quality
Global + Efficient
Charge profiles to precisely charge deep-cycle
lead acid and lithium batteries. Developed in
Delta-Q’s battery lab to balance charge time,
battery life and application requirements.
Capable of operating reliably on any singlephase grid worldwide. High-efficiency
performance for electricity savings and shorter
charge times.
NT
LIA
CAL
I
M
ISS
GY
COM
delta-q.com
NI A E N
ER
R
FO
P
ION COM
IC650 Charger Specifications
DC Output
24 VDC
36 VDC
48 VDC
Maximum DC output voltage
36 V
54 V
72 V
Maximum DC output current
27.1 A
18.1 A
13.5 A
Maximum DC output power
Deep discharge recovery
(minimum voltage)
650 W
1.2 V
Maximum C3 interlock
signal current
1.8 V
2.4 V
1.5 A
(15 A with external interlock device, 24V model only)
Battery type
Lead acid (Wet / AGM / GEL), lithium
Reverse polarity
Electronic protection with auto-reset
Short circuit
Electronic current limit
AC Input
AC input voltage range
85-270 VAC
Nominal AC input voltage
100-240 VAC
Nominal AC input frequency
50 / 60 Hz
Maximum AC input current
7.5 A
Nominal AC input current
7.3 A @ 100 VAC
6.0 A @ 120 VAC
3.1 A @ 230 VAC
2.9 A @ 240 VAC
Power factor
>0.99 @ 120 VAC
>0.98 @ 230 VAC
Regulatory
Efficiency
Safety
93.5% peak, California Energy Commission compliant
UL1564, CSA 107.2, EN 60335-2-29, AZ/NZS60335 (RSM)
Emissions
FCC Part 15 / ICES 003 Class A, EN55011, EN 61000-6-4
Immunity
EN 61000-3-2, EN 61000-3-3, EN 61000-6-2
Weight
AC input connector
DC output connector
Service port
Mounting holes
Cooling
­­ Optional CAN bus
communication for
machine integration or
lithium BMS
­­ Multi-color LED indicator
for AC source, battery
status, charging, error, fault
­­ Numeric display for charge
profile, alarm/fault codes
­­ Field programmable with
up to 25 charge profiles
­­ Auto-recharge for low
voltage in maintenance
mode
­­ OEM customizable, field
replaceable cable design
­­ Optional carrying handle
Dimensions
Mechanical
Dimensions
Usability Features
25.2 x 18.6 x 8 cm (9.9 x 7.3 x 3.1”)
80mm
(3.1”)
< 3 kg (< 6.5 lbs)
IEC320 / C14 (requires country-specific cord)
M6 threaded fasteners for ring terminals
Sealed (IP66) USB 2.0 Host Port (Type A) with dust cover
Allows for safe installation on shelf, wall or bulkhead
25
2m
(9. m
9”)
Normal operation in any orientation with passive cooling
m
6m
18 .3”)
(7
Environmental
Enclosure
IP66 (NEMA4)
Mechanical shock &
vibration
GMW3172
Corrosion & humidity
Thermal fatigue
Operating temperature
Storage temperature
-40oC to +65oC (-40oF to 149oF)
Derated at >40oC (104oF)
-40oC to +85oC (-40oF to 185oF)
Visit delta-q.com/products to view the complete Delta-Q product portfolio.
© 2016 Delta-Q Technologies Corp. All rights reserved.
(DOCUMENT 720-0011 R7 Date: 08/07/2016)
Web: delta-q.com
Phone: +1.604.327.8244
E-mail: sales@delta-q.com
Delta-Q Technologies
3755 Willingdon Avenue
Burnaby, BC V5G 3H3
Canada
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising