V-MODA.com/Register USER`S MANUAL

V-MODA.com/Register USER`S MANUAL
USER’S MANUAL
REGISTER NOW AT
V-MODA.com/Register
CAUTION
If serial number on the product, on manual
cover or bottom of packaging is missing or
defaced, please return to retailer immediately.
V-MODA.com/Manuals
english
V-MODA.com/Manuals
español
V-MODA.com/Manuals
français
V-MODA.com/Manuals
italiano
deutsch
한국어의
V-MODA.com/Manuals
V-MODA.com/Manuals
简体中文
要获得说明书的打印件, 请访问 V-MODA.com/Manuals
繁體中文
要獲得說明書的打印件, 請訪問 V-MODA.com/Manuals
日本語
本取扱説明書の電子版を以下のページからダウンロード・
プリントアウトすることができます V-MODA.com/Manuals
ROCK SAFELY
Enjoy your music responsibly. According to the American Speech-Language-Hearing
Association (ASHA), “listening to personal music players, stereos and headphones at high
volumes for extended periods of time can directly result in lifelong hearing loss”. At V-MODA
we are dedicated to providing an enjoyable listening experience, but we also care greatly about
your personal health and safety. We recommend that you listen to your Remix® speaker
at comfortable volume levels for reasonable periods of time.
How to enjoy your music responsibly
• Turn down the volume. A good point of reference is half volume.
• Limit listening time. Give your hearing a “time out”.
Caution around children. Keep out of reach of children, the parts included with this product
can be a choking hazard. This product is not intended for children under 7 years of age.
WELCOME
Welcome to V-MODA, the music lifestyle. We sincerely hope you enjoy our Remix speaker,
the pinnacle of sound and quality design. With the essence of music at the foundation of all we
do, we have precisely engineered our Remix speaker to provide an enjoyable and natural sound
signature, which invokes the sense of listening to your music live. Play Hard. Rock Harder.
Package Contents
1
2
4
1.
2.
3.
4.
Remix Wireless Speaker
USB-A to USB-C charging cable
Daisy Chain cable
4x RemixRings
3
CHARGING THE SPEAKER
The Remix speaker has a built-in lithium-ion rechargeable battery. Fully charge the Remix
speaker for 3 hours before using it for the first time.
Note that Remix is equipped with USB-A to USB-C charging cable for faster and safer charging.
Do not use any other type of charging cables to charge the Remix speaker.
• Fading orange LED = charging
• White LED = fully charged
•Blinking orange LED = low battery
TURNING ON/OFF THE REMIX SPEAKER – BATTERY STATUS
When turning on the Remix speaker, the orange LED indicates the battery level.
1. Press the
button to turn on the Remix speaker. Power on tone plays and the orange LED flashes a number of times based on the battery level:
1s
1s
1s
1s
1s
1s
• Battery 100-81%: orange LED flashes 4 times
• Battery 80-61%: orange LED flashes 3 times
• Battery 60-41%: orange LED flashes twice
• Battery <40%: orange LED flashes once
3min
2. Press the
turn off.
• Low battery: orange LED flashes twice
in 3 minutes while operating
button to turn off the Remix speaker. Power off tone plays and all LEDs
WIRELESS MODE
TOP VIEW
Status LED
Microphone
ON/OFF
Volume down
Multifunction
Pairing
Volume up
BACK VIEW
AUX IN
USB-C port
VAMP port / AUX-OUT + LED
PAIRING AND CONNECTING WITH A NEW BLUETOOTH DEVICE
When pairing with one, two or more Bluetooth devices, perform the following pairing procedure
every time you pair a new device.
1. Press the
button to turn on the Remix speaker.
Power on tone plays, battery level orange LED flashes,
then white LED flashes twice every second while the VAMP
orange LED is on.
2. Press and hold
for 3 seconds to connect the new
Bluetooth device. Once “V-MODA Remix” appears in the
“new/available Bluetooth devices” section on your phone,
select it to begin pairing. If passkey input is required on
the display of a Bluetooth device, type “0000”.
3. Ready to rock. When the Bluetooth connection is established,
connected tone plays and white LED on the Remix speaker
stays lit.
Bluetooth
Bluetooth
V-MODA
Remix
CONNECTING WITH A PAIRED BLUETOOTH DEVICE
When pairing with one, two or more Bluetooth devices, perform the following procedure
every time you connect the Remix speaker with an already paired device.
1. Press the
button to turn on the Remix speaker. Power on tone plays,
battery level orange LED flashes a number of times based on the battery level.
2. Ready to rock. When the Bluetooth connection is established, connected tone plays
and white LED on the Remix speaker stays lit .
If device does not auto connect, go to Bluetooth settings and select “V-MODA Remix”.
LISTENING TO MUSIC, TRACKS CONTROL AND VOICE ASSISTANT
Start playback on the paired/plugged device and
adjust the volume with the
and
buttons
on the Remix speaker
MAX
Press and hold
max volume
for up to 10 seconds to reach
MIN
Press and hold
min volume
for up to 10 seconds to reach
10 SEC
10 SEC
Press
once to play and pause
Press
twice for next track
Press
3 times for previous track
1x
2x
3x
Press and hold
for 3 seconds to summon Voice
Assistant such as Siri/OK Google
3 SEC
Track controls may vary based on device and settings.
MAKING A CALL / RECEIVING A CALL
ANSWER A CALL
Press
once to answer (music pauses automatically)
1X
REFUSE / HANG UP
To refuse an incoming call or to hang up an existing call,
press and hold
for 2 seconds, then release
2 SEC
CALL ON HOLD
1X
Press
once to put the ongoing call on hold and
connect to the second incoming call; long press
for 2 seconds to connect the second call and hang up
the first call; short press
twice to refuse a second
call while attending one
Making a call/ Receiving a call functions do not work in wired mode.
WIRED MODE
When connecting an audio device via AUX IN, plug in the device with the included audio cable.
1. Plug in an audio device into Remix speaker’s AUX IN via V-MODA audio cable.
2. Press the
button to turn on the Remix speaker. Power on tone plays, battery level orange LED flashes a number of times based on the battery level.
3. Ready to rock. When the AUX IN connection is established, both white LED and VAMP orange LED stay lit; audio device is ready to play.
VAMP MODE
VAMP Mode transforms the Remix speaker into a headphone amplifier for stunning sound quality.
1. Plug in an audio device into Remix speaker’s AUX IN via V-MODA audio cable.
2. Press the
button to turn on the Remix speaker. Power on tone plays, battery level
orange LED flashes a number of times based on the battery level. Then white LED stays lit.
3. Plug in headphones into Remix speaker’s VAMP port via audio cable.
4. Press the
button once to switch to VAMP mode. Orange LED stays lit.
5. Ready to rock. Audio device is ready to play via headphones and Remix speaker is now
an amplifier.
DAISY CHAIN MODE - BLUETOOTH
Two or more Remix speakers can be linked together and play seamlessly via the same audio
player.
1. Press the
button to turn on the Remix speaker. Power on tone plays, battery level orange LED flashes a number of times based on the battery level. Then white LED stays lit.
2. Bluetooth connect Remix speaker 1 and audio player following the instructions on page 10.
3. Plug in Remix speaker 1’s VAMP and Remix speaker 2’s AUX IN.
4. Press the
button to turn on the Remix speaker 2. Power on tone plays, battery level orange LED flashes a number of times based on the battery level. Then white LED stays lit.
5. Remix speakers are now in “daisy chain” mode. You can adjust the output volume on either one of the speakers and enjoy music from both speakers at the same time.
6. (optional). Repeat steps 3 and 4 to add more Remix speakers to the “daisy chain”.
DAISY CHAIN MODE - BLUETOOTH
SPEAKER 1
SPEAKER 2
DAISY CHAIN MODE - WIRED
1. Plug in an audio device and Remix speaker 1 via V-MODA audio cable.
2. Plug in Remix speaker 1’s VAMP and Remix speaker 2’s AUX IN.
3. Press the
button to turn on both Remix speaker 1 and Remix speaker 2. Power on tone plays, battery level orange LED flashes a number of times based on the battery level.
Then white LED stays lit on both Remix speakers.
4. Remix speakers are now in “daisy chain” mode. You can adjust the output volume on either one of the speakers and play from both speakers at the same time.
5. (optional). Repeat steps 2 and 3 to add more Remix speakers to the “daisy chain”.
DAISY CHAIN MODE - WIRED
SPEAKER 1
SPEAKER 2
ONE REMIX SPEAKER, TWO AUDIO DEVICES
The Remix speaker can be connected to two audio devices at the same time and play
alternatively from both audio devices.
1. Bluetooth connect Remix speaker and audio player 1 following the instructions on page 10
2. Bluetooth connect Remix speaker and audio player 2 following the instructions on page 10
1
3. Re-connect Remix speaker and audio player 1
by using the player’s Bluetooth devices pairing sections
4. Shift the audio player from 1 to 2 by controlling the play/pause buttons on the audio players
5. The
button on the Remix speaker will control only play/pause of the playing audio player
2
OTHER USEFUL FUNCTIONS
RESET PAIRED DEVICES HISTORY
To reset paired devices history press and hold
for 3
seconds. White and orange LEDs flash alternatively twice.
HOLD 3sec
POWER SAVING MODE
If no device is paired with the Remix speaker for 3 minutes, white
LED starts to flash once every 3 seconds, VAMP orange LED stays
lit for power saving mode. To resume the Remix speaker simply
press the
button. If no audio signal is detected or no device
is paired with the Remix speaker for 10 minutes, power off tone
plays and all LEDs turn off. The Remix speaker is now switched off.
CONNECTION OUT OF RANGE
If the audio device is outside the connection range “Out of Range”
tone plays every 5 seconds for 2 minutes, white LED flashes
twice per second and VAMP orange LED stays lit until the device
automatically connects when back within the connecting range.
If no device to be connected is detected for 2 minutes, speaker
will switch to power saving mode.
HOW TO CHECK YOUR BATTERY STATUS
To easily check the Remix speaker battery status, hold the
button for 2 seconds. Orange LED flashes 4 times if battery life is
between 81-100%; 3 times if battery life is between 61-80%; twice
if battery life is between 41-60%; once if battery life is less than
40%; twice every 3 minutes if battery life is less than 20% (low
battery). Note that on some devices (e.g. iPhone 7), it is possible
to check battery status on the device’s screen or widget.
USING YOUR REMIXRINGS AND 3D PRINTED CUSTOM PARTS
With the 3D printed custom sides, housing and grill you can revolutionize your Remix speaker
and forge your own personal relic which will be 3D sculpted in Milan and 3D printed in NYC.
1. Install RemixRings to ensure that 3D printed
sides are stable
2. 4x RemixRings are included with the Remix
speaker to change the look of it
3. RemixRings cover the screws on the Remix
speaker and ensure stability when the Remix
speaker is put on whatever type of surface
4. Make sure that the uneven side with two F
printed on it is facing the front of the Remix
speaker
USING YOUR 3D PRINTED CUSTOM SIDES (SOLD SEPARATELY)
1. Slide RemixRings onto their housing
2. Slide 3D printed custom sides onto the Remix speaker until the sides cover the RemixRings and cannot slide any further creating a snug fit
USING YOUR 3D PRINTED CUSTOM HOUSING (SOLD SEPARATELY)
1. Remove the RemixRings from their housing if present
2. Unscrew screws from the surface of Remix speaker
3. Remove the pre-installed housing
4. Install and adjust the 3D printed custom housing onto the back of the Remix speaker
5. Fasten the screws in for a snug fit
USING YOUR 3D PRINTED CUSTOM GRILL (SOLD SEPARATELY)
USING YOUR 3D PRINTED CUSTOM GRILL (SOLD SEPARATELY)
1. Remove the RemixRings from their housing if present
2. Remove screws from the surface of Remix speaker
3. Remove the pre-installed housing
4. Remove the pre-installed grill
5. Install and adjust the 3D printed custom grill onto the front of the Remix speaker
6. Install and adjust the housing (3D printed custom or the included one) onto the back
of the Remix speaker
7. Fasten the screws in for a snug fit
The sound quality and acoustics performance of the Remix speaker may vary when 3D parts are installed
in place of the original parts. V-MODA will not be responsible for the acoustics performance after the 3D
customization.
Troubleshooting
If you are experiencing trouble with your Remix speaker, please refer to the troubleshooting
guidelines below. If the problem persists, please contact the V-MODA Six Star Service at
V-MODA.com/Support or 1.888.VMODA.LA.
TROUBLE
SUGGESTIONS
Pairing process trouble
-
Turn off the Remix speaker and turn it on again
Remember to turn on the Bluetooth feature on your device
Turn off the Bluetooth feature on any other device which has been previously
paired (can only pair with one device at a time)
Reset paired devices history by pressing and holding Volume + and Volume for 3 seconds
Try to pair with another device to be sure that both the Remix speaker
and your Bluetooth device are working properly
Go to Bluetooth settings and select “V-MODA Remix”
TROUBLE
SUGGESTIONS
Receiving no audio or low
quality audio from a audio
source
-
Audio and video do
not match
Check the battery
Check the pairing
Make sure the audio source is playing
Make sure the volume on the device is not muted or turned down
Reboot the source/device
Turn off the Remix speaker and turn it on again
Reset paired devices history of the Remix speaker
Try streaming from another device or select another track
Move the device and Remix speaker closer (max 33 feet or 10m)
Keep away from any possible intereference (wireless routers, other Bluetooth devices, microwaves etc.)
Close any applications on your device that are not in use and disable Wi-Fi
Try streaming from another device or select another track. Due to technology
limitations, there may be a delay from some sources or applications.
TROUBLE
SUGGESTIONS
No audio (in wired mode)
Make certain the audio device and the Remix speaker jacks are free of debris
and that the cable is securely connected.
Lack of or excessive bass
or treble (in wired mode)
Turn off any audio enhancement features on audio device. Make sure cable is
firmly connected to the Remix speaker and device. If the problem persists, try
another cable.
Uneven Sound
(in wired mode)
Make sure cable is firmly connected to the Remix speaker by ensuring male
3.5mm is inserted into female 3.5mm all the way.
Headphones deliver mono
sound (in VAMP mode)
Make sure to properly follow the procedure to connect headphones in VAMP
Mode.
Distorted sound
Check to make sure the problem is not with the audio device or the file you are
listening to. Ensure the EQ settings on the device are set properly.
TROUBLE
SUGGESTIONS
Remix speaker will
not charge
-
Make sure the Charging cable and source are functioning properly
Make sure both USB plugs are firmly connected into their sockets
Disconnect and reconnect the USB charging cable
If charging with your computer, be sure the USB port is powered
and remember to plug in your computer
CLEANING YOUR REMIX SPEAKER
To clean the exterior surface of the Remix speaker, you can wipe it using a soft and dry cloth.
Do not use solvents, chemicals, or sprays and do not allow liquids to spill on the product.
Limited Warranty
For a period of one (1) year from the date of retail purchase by the original end-use purchaser,
V-MODA warrants that this product is free from any defects in manufacturing, materials and
workmanship, under the following conditions:
• V-MODA will repair or replace the product within a reasonable period of time and free of
charge for one (1) year from the date of retail purchase by the original end-use purchaser.
• Product must be purchased from a V-MODA authorized reseller and delivered to you in new
condition, in original packaging. This warranty does not cover products purchased open box,
sold as-is, sold by private party resale or any other third party purchases from unauthorized
resellers.
• This Limited Warranty does not cover defects resulting from cosmetic damage, acts of God,
misuse, accidents, commercial use, unauthorized alteration or modification of the product,
improper connection, improper use or attempted repair by unauthorized distributors or
resellers.
• This warranty is void if the label bearing the serial number has been removed or defaced.
• To obtain service under this limited warranty, visit V-MODA.com/Warranty to fill out the online
warranty form and obtain further information.
• For other customer service inquiries, please e-mail support@V-MODA.com. You may also call
1.888.VMODA.LA Monday through Friday, 9:00 am to 5:00 pm (Pacific Standard Time).
• This limited warranty gives you specific legal rights, and you also may have other rights that
vary from state to state or country to country. Some places do not allow limitations on implied
warranties or the exclusion or limitation of incidental or consequential damages, so the above
limitations or exclusions may not apply to you.
V-MODA Immortal Life Program - lifetime 50% discount (Available in US only)
We do not judge. If you abuse your speaker crowdsurfing, stage diving, spelunking
or otherwise, the V-MODA Immortal Life Program has your back.
All we ask is that you send the speaker (or what is left of it) to us and we will email you a 50%
off coupon towards a comparable product from V-MODA.com.
Visit V-MODA.com/Support, e-mail support@V-MODA.com or call 1.888.VMODA.LA, Monday
through Friday, 9:00 am to 5:00 pm (PST), for information on how to get your 50% voucher. CAUTION
If serial number on the product,
on manual cover or bottom of packaging
is missing or defaced, please return
to retailer immediately.
COMPLIANCES
NOTE: This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, this is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, you are encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment to an outlet on a different circuit than the one to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by V-MODA could void the user’s authority to operate this
equipment.
This device complies with Industry Canada license exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired operation.
V-MODA LLC hereby declares that this product is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC and all other applicable EU directive requirements. The complete declaration of conformity can be found at V-MODA.com/Compliance.
V-MODA Milano Design
©2017 V-MODA. All rights reserved.
V, V-MODA, Remix and VAMP are registered trademarks of V-MODA, LLC.
U.S. patent pending application no. 14/740107.
iPhone®, iPad®, iPod® are trademarks of Apple Inc., registered in the U.S. and other countries.
The trademark “iPhone” is used with a license from Aiphone K.K.
Android is a trademark of Google Inc. and is in no way affiliated with V-MODA.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by V-MODA is under license.
Other trademarks and trade names are those of their respective owners.
PLEASE DO NOT RETURN TO RETAILER
For any issues relating to your V-MODA product,
please contact our Six Star Service directly.
visit
email
V-MODA.com/SUPPORT
support@V-MODA.com
twitter
@VMODASixStar
skype
call
V-MODASixStar
1.888.VMODALA
ACTIVATE YOUR WARRANTY
AND
50% IMMORTAL LIFE PROGRAM
REGISTER NOW
AT
V-MODA.com/Register
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising