Ranger Count and Count Plus Models
RD_DS_en_80774302.qxd
2/20/07
1:37 PM
Page 1
Ranger TM Series
Compact Industrial Bench & Counting Scales
High Precision, Easy to Use, Rugged
The upgraded and expanded OHAUS RangerTM series expands the popular and rugged family of high
precision bench scales by adding more features, more models, and more value – making the Ranger
the most precise, easy-to-use and rugged line of compact bench scales available.
Featuring multiple platform sizes, vast capacity and readability choices and housed in a painted cast
aluminum housing, Ranger is designed to perform in virtually any industrial environment. Ranger’s
enhanced microprocessor, and updated digital filtering software combine to give you the most accurate
and rapid reading possible.
And of course, every Ranger is designed with OHAUS’ easy to use software interface, so operation is intuitive,
with a consistent feel across all three Ranger lines: Standard Ranger for basic weighing, Ranger Count for
simple counting applications, and Ranger Count Plus for more advanced counting applications.
Standard Features Include:
•
•
•
•
•
•
•
•
•
•
High-performance Strain Gauge and Single Block MFR technology
Rugged cast aluminum housing and stainless steel pans
Compact design, with bright backlit display, adjustable feet and level bubble
Wide range of platforms and capacities from 3kg to 35kg
Multiple weighing units (g, kg, lb, oz, t) with Gross, Net, Tare function
Built-in Supervisor Control software
RS232 port standard
Built-in AC power supply and factory-installed battery option
OHAUS Collect Software Wedge available
EC type approved models available
RD_DS_en_80774302.qxd
2/20/07
1:37 PM
Ranger
Page 2
Compact Industrial Bench Scales
Ranger Basic Weigh Models
Ranger Basic Weigh models are the perfect choice for general weighing applications, where ruggedness and
high precision are important. All Ranger Basic Weigh scales benefit from enhanced electronics and software,
and all models come standard with Dynamic Weighing, multiple units of measure, standard RS232 connectivity,
large backlit LCD, and easy-to-use text driven software. The Ranger Basic Weigh is available in a variety of
housing sizes and resolution choices, including IP65 wash-down versions and high resolution MFR models
(up to 120,000d). See the specification table for the complete selection of sizes and options.
Ranger High Resolution Models
Ranger High Resolution MFR load cells are available in Basic Weigh and in Count Plus configurations.
The MFR load cell enables external resolutions up to 1:120,000 and 0.01g readability. Approved MFR models
also come standard with InCalTM internal calibration, to ensure weighing accuracy by allowing you to calibrate
your scale prior to use without the need for external weights, allowing readability that is ideal for near-analytical
industrial weighing applications. High Resolution Rangers share the same aluminum housing, advanced
software and features found in Basic Weigh and Count Plus models.
Ranger IP65 Models
For more even more flexibility in harsh and wet environments, waterproof IP65 models are available in the
Ranger Basic Weigh line. Ranger IP65 models share the same rugged aluminum housing and software
features from the Basic Weigh line, and are encased in aluminum waterproof housing with stainless steel pan.
Optional Internal Rechargeable Battery
Let’s you use your scale where no main
supply is available
Standard RS232
Optional analog input for
second scale / remote platform
Optional IP65 Housing
Waterproof housing for
use in wet environments
(Basic Weigh models)
Removable 18-gauge
full stainless steel
weighing pan
Rugged and easy to clean
Large, Backlit LCD Display
Enhances visibility under
any lighting conditions
Dedicated Count Keys
For rapid count set up, quick
access keys such as Sample,
Sample 10 and Average Piece
Weight (Count and Count
Plus models)
Optional EC Type
Approvals
For Legal for Trade
applications
Menu Function
To store and recall parameters
such as Tare, Average Piece
Weight and Target Values
(Count Plus models only)
Dedicated Print Key
Easily send data to your
PC or printer
Numeric Keypad
Allows for quick and convenient
entry of known values, such as
Tare and Average Piece Weight
(Count Plus models only)
Adjustable Feet with Level Bubble
Four rugged adjustable feet and level
bubble allow for superior stability
RD_DS_en_80774302.qxd
2/20/07
1:37 PM
Page 3
Ranger Count and Count Plus Models
The OHAUS Ranger Count and Count Plus series of scales are the high performance solution to inventory and
counting needs for industrial and commercial applications. These Rangers have dedicated counting functions
ranging from a simple one key count operation, to a more advanced numeric keypad for inputting average
piece weight (APW) and other counting data (Count Plus). The counting Rangers also have advanced average
piece weight and sample accuracy optimizing software to ensure a fast and accurate count every time.
Ranger’s cast aluminum construction, combined with an easy-to-use interface, make the Ranger Count and
Count Plus the perfect blend of power and precision.
Ranger Count Features (in addition to Basic Weigh features)
• 4 Standard operating keys and 6 Count Specific keys
• Positive and negative counting – Count into or out of a container keeping track of how many parts are on the
scale or have been removed
• Info Key – Allows user to call up specific piece weight information, and toggles resolution
• Scale Select – Used with optional Analog input option to select which scale or platform output to be displayed
• G/N/T Key – Displays Gross , Net and Tare values
• Count / Weight Key – Allows user to quickly switch between counting and basic weigh mode
• Sample 10 Key – Immediately takes reference weight on pan and divides by 10 to calculate average piece weight
• Sample Size Key – Manually select from 5 pre-determined sample sizes
• Average Piece Weight Optimization – Automatically recalculates average piece weight increasing accuracy
• Low APW alert – Alerted when average piece weight is too low to ensure maximum accuracy
Ranger Count Plus Features (in addition to Basic Weigh and Count features)
• Numeric 10 digit keyboard for immediate entry of APW value, Tare Values, and Memory storage
• Flexible Taring – Preset tare weights can be entered via keyboard
• 100 Memory locations reserved for storing Tare values, APW values, check weigh values and target weights
• Separate clear and memory keys for easier input and recall of data
• Target setting – Scale allows setting of target count or weight values
• Totalizing Function – Sums series of weighings in mass or count measurement
• Check Weigh – Input over, under and nominal values for sample verification
• ID Weighing – Up to 2 identities can be assigned per weighing sample (for example a weighing will show
Customer ID and part number ID)
Outline Dimensions
Large Housing
Small Housing
RD_DS_en_80774302.qxd
2/20/07
1:37 PM
Ranger
Page 4
Compact Industrial Bench Scales
Specifications
Ranger Basic Weigh
Ranger Count
Ranger Count Plus
Capacity (kg)
Non Approved Readability
Approved Capacity
Approved Readability
Ranger Basic Weigh High Resolution
Ranger Count Plus High Resolution
Capacity
Non Approved Readability
Approved Capacity
Approved Readability
RD3RD
RC3RD
RP3RD
3
0.1g
1.5/3kg
0.5/1g
RD3SM
RP3SM
600/3.1kg
0.01/0.1g
NA
NA
–
–
–
–
–
–
–
RD6SM
RP6SM
1.2/6.1kg
0.01/0.1g
NA
NA
RD6RD
RC6RD
RP6RD
6
0.2g
3/6kg
1/2g
RD6RM
RP6RM
1.2/6.1kg
0.1/1g
NA
NA
Operating Temperature
Linearity
RD15RD
RC15RD
RP15RD
15
0.5g
6/15kg
2/5g
–
–
–
–
–
–
RD15LD
RC15LD
RP15LD
15
0.5g
6/15kg
2/5g
RD15LM
RP15LM
3.5/15.1kg
0.1/1g
3.5/15.1kg
2/5g
RD35LD
RC35LD
RP35LD
35
1g
15/35kg
5/10g
RD35LM
RP35LM
7/35.1kg
0.1/1g
7/35.1kg
5/10g
10 - 40° C
± 1 division
Calibration
External span, internal on High
Resolution approved models
External span
Pan Size (mm)
Platform Material
165 x 165
200 x 240
240 x 350
Stainless steel
Basic Weigh, Dynamic Weigh (RD models)
Basic Weigh, Dynamic Weigh, Parts counting, Parts counting with second scale (RC models)
Basic Weigh, Dynamic Weigh, Parts counting, Parts counting with second scale, checkweigh, totalization, target weigh (RP models)
6 button operation (RD models)
10 button operation (RC models)
25 button operation, includes full numeric keypad (RP models)
Applications
Interface
Weighing Units
kg, g, lb, oz, t
Backlit 7 segment LCD, 20mm height (RD models)
Backlit LCD with capacity guide, 35 mm height (RC and RP models)
Display
Stabilization Time
~1 sec
Country Specific : 240V, 50Hz, 70mA / 230V,50Hz,70mA
120V,60Hz,90mA / 100V, 50/60Hz, 90mA
Power
Optional Battery
GMP compliant
Construction
Interface
Nickel-Metal Hydride
Yes
Painted cast aluminum housing
Built-in RS232
IP43 Standard, optional IP65 available for non High Resolution models (RD models)
IP43 (RC and RP models)
Ingress Protection
Factory Options
Models
Available
AP
EC Type approved
RD, RC, RP
BA
Internal Rechargeable Battery
RD, RC, RP
AN
Analog input
RC, RP
AB
Analog input, Internal Rechargeable Battery
RC, RP
APAN
EC Type approved, Analog
RC, RP
IP
IP65
RD
APIP
EC Type Approval, IP65
RD
APIPBA
EC Type Approval, IP65, Internal Rechargeable Battery
RD
www.ohaus.com
© Copyright Ohaus Corporation
Option
80774302
Model
Suffix
* ISO 9001:2000
Registered Quality Management System
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising