flexible silicone hoses
FLEXIBLE SILICONE HOSES
FOR INDUSTRIAL ENGINES
VENA LS
®
Engineered and manufactured to your exact specifications
LIGHTER
THINNER
STRONGER
+
61%
PRESSURE
RESISTANCE
new construction
2
-WEIGHT
49%
SILICONE HOSES WITH POLYESTER REINFORCEMENTS
FOR HEATING AND COOLING SYSTEMS
VENA® SIL 200/240
STRAIGHT HOSE
SAE J20 R1 Class A
Material
Silicone VMQ* (Vinyl Methyl Quality)
Textile reinforcement
SIL 200: 3 ply of polyester fabric
SIL 240: 4 ply of polyester fabric
Temperature range
-60ºC to +180ºC (-76ºF to +356ºF)
Standard wall thickness
SIL 200: 4,2mm (+1/-0,5mm) | 0,17’’ (+0,04/-0,02’’)
SIL 240: 5,2mm (+1/-0,5mm) | 0,20’’ (+0,04/-0,02’’)
Length
From 1 to 4m (3,8 to 13,12ft). Can be cut to smaller lengths
upon customer request.
Smooth outer and inner appearance. Suitable for use in straight
lengths, with no bending requirements. It can also be supplied
with another type of textile reinforcement (Aramide, fiberglass)
Inner diameter **
mm
6
13
19
25
32
38
45
51
57
63
70
76
80
90
inch
1/4
1/2
3/4
1
1 1/4
1 1/2
1 3/4
2
2 1/4
2 1/2
2 3/4
3
3 1/8
3 1/2
bar (Sil200)
16,1
9,7
7,2
5,9
4,9
4,3
3,7
3,4
3,1
2,9
2,7
2,5
2,3
1,9
100
4
1,6
Working pressure ***
ISO 1402:2009
bar (Sil240)
psi (Sil200)
21,3
234
12,0
141
9,3
104
7,6
86
6,3
71
5,6
62
5,0
54
4,6
49
4,3
45
4,0
42
3,6
39
3,3
36
3,3
33
3,0
28
2,6
23
psi (Sil240)
309
174
135
110
91
81
73
67
62
58
52
48
48
44
bar (Sil200)
48,5
29,1
21,8
17,7
14,7
12,9
11,3
10,3
9,4
8,8
8,1
7,5
6,9
5,7
38
5,0
Bursting pressure ***
ISO 1402:2009
bar (Sil240)
psi (Sil200)
64,0
703
36,0
422
28,0
316
23,0
257
19,0
213
17,0
187
15,0
164
14,0
149
13,0
136
12,0
128
11,0
117
10,0
109
10,0
100
9,0
83
8,0
73
psi (Sil240)
928
522
406
334
276
247
218
203
189
174
160
145
145
131
116
* Other constructions available for higher pressure and temperature applications.
** Other diameters can also be manufactured. Please consult.
*** Pressure data is noted at ambient temperature. Pressure values should be reduced by 20% for each increase of 100ºC (212ºF)
LONG LIFE SILICONE HOSES
Venair Long Life formulation and construction is the most
technically advanced solution to extreme operating conditions
and resistance to the modern aggressive coolants in the market.
Venair silicone hose products are used by the largest
Transportation Authorities and Fleet Companies worldwide to
reduce warranty and maintenance down time.
www.venair.com
3
STRAIGHT REDUCER
Material: Silicone VMQ (Vinyl Methyl Quality)
Textile reinforcement: 3 or 4 plies of polyester fabric
Temperature range: -60ºC to +180ºC (-76ºF to +356ºF)
Standard wall thickness
4,2mm (+1/-0,5mm) | 0,17’’ (+0,04/-0,02’’)
Length: 100mm / 150mm (4’’ / 6’’)
Smooth inner and outer appearance.
Diameter*
mm
18/13
19/16
22/18
22/19
28/22
28/26
32/26
32/28
35/28
36/26
36/32
38/22
38/25
38/28
38/32
38/36
40/35
45/32
Length
inch
5/7 > 1/2
3/4 > 5/8
6/7 > 5/7
7/8 > 3/4
1 1/9 > 6/7
1 1/8 > 1
1 1/4 > 1
1 1/4 > 1 1/9
1 3/8 > 1 1/9
1 3/7 > 1
1 3/7 > 1 1/4
1 1/2 > 6/7
1 1/2 > 1
1 1/2 > 1 1/9
1 1/2 > 1 1/4
1 1/2 > 1 3/7
1 4/7 > 1 3/8
1 7/9 > 1 1/4
mm
inch
100
150
4’’
6’’
Diameter*
mm
inch
45/38
1 3/4 > 1 1/2
51/38
2 > 1 1/2
51/45
2 > 1 3/4
54/51
2 1/8 > 2
60/50
2 3/8 > 2
63/51
2 1/2 > 2
67/51
2 5/8 > 2
70/50
2 3/4 > 2
70/57
2 3/4 > 2 1/4
70/60
2 3/4 > 2 3/8
76/51
3>2
76/63
3 > 2 1/2
76/67
3 > 2 5/8
80/70
3 1/8 > 2 3/4
90/80
3 1/2 > 3 1/8
102/76
4>3
127/100
5>4
Length
mm
inch
100
150
4’’
6’’
* Other diameters are available.
ELBOW 90º / 45º / 135º
Material: Silicone VMQ (Vinyl Methyl Quality)
Textile reinforcement: 3 or 4 plies of polyester fabric
Temperature range: -60ºC to +180ºC (-76ºF to +356ºF)
Standard wall thickness
4,2mm (+1/-0,5mm) | 0,17’’ (+0,04/-0,02’’)
Length of legs: 100mm / 150mm / 200mm (4’’ / 6’’ / 8’’)
Smooth inner and outer appearance.
Diameter*
mm
6
8
10
13
16
19
22
25
28
30
32
35
38
40
41
Length*
inch
1/4
1/3
2/5
1/2
5/8
3/4
7/8
1
1 1/8
1 3/16
1 1/4
1 3/8
1 1/2
1 9/16
1 3/5
* Other diameters and leg lengths are available.
4
Diameter*
mm
inch
100
150
200
4’’
6’’
8’’
mm
45
48
51
55
57
60
63
67
70
76
80
90
95
102
110
Length*
inch
1 3/4
1 7/8
2
2 1/8
2 1/4
2 1/3
2 1/2
2 5/8
2 3/4
3
3 1/8
3 1/2
3 3/4
4
4 1/3
mm
inch
100
150
200
4’’
6’’
8’’
REDUCER ELBOW 90º
Material: Silicone VMQ (Vinyl Methyl Quality)
Textile reinforcement: 3 or 4 plies of polyester fabric
Temperature range: -60ºC to +180ºC (-76ºF to +356ºF)
Standard wall thickness
4,2mm (+1/-0,5mm) | 0,17’’ (+0,04/-0,02’’)
Length: 100mm / 150mm (4’’ / 6’’)
Smooth inner and outer appearance.
Diameter*
mm
Length*
inch
mm
Diameter*
inch
Length*
mm
inch
25/19
1 > 3/4
60/50
2 3/8 > 2
32/25
1 1/4 > 1
63/51
2 1/2 > 2
mm
inch
38/25
1 1/2 > 1
100
4’’
70/50
2 3/4 > 2
100
4’’
38/32
1 1/2 > 1 1/4
150
6’’
70/60
2 3/4 > 2 3/8
150
6’’
38/35
1 1/2 > 1 3/8
76/51
3>2
51/45
2 > 1 3/4
76/63
3 > 2 1/2
* Other diameters and leg lengths are available.
VENA TECHNOSIL
SAE J20R3 Class A
Heater Hose
Material: Silicone VMQ (Vinyl Methyl Quality)*
Textile reinforcement: Polyester braiding
Temperature range: -60ºC to +180ºC (-76ºF to +356ºF)
Wall thickness: Variable, depending on diameter.
Length: standard rolls of 76,2m (250 ft.) delivered on a plastic
spool. Other lengths are possible upon request.
Extruded hose with smooth inner and outer appearance. Meets
the requirements of SAE J20R3 Class A standard for cooling
systems in the automotive industry.
Inner diameter
Working pressure
ISO 1402:2009
Outer diameter
Bursting pressure
ISO 1402:2009
mm
inch
mm
inch
bar
psi
mm
inch
6,30
1/4
13,20
1/2
9,60
139
28,80
418
7,90
1/3
15,00
3/5
8,80
128
26,50
384
9,50
3/8
16,60
2/3
7,70
112
23,00
334
12,70
1/2
20,30
4/5
6,80
99
20,30
294
15,80
5/8
24,50
1
5,90
86
17,80
258
19,00
3/4
27,90
1
5,10
74
15,20
220
22,00
7/8
31,30
1 1/4
5,00
73
15,00
218
25,40
1
34,50
1 1/3
4,90
71
14,80
215
28,00
1 1/8
38,00
1 1/2
4,40
64
13,20
191
32,00
1 1/4
43,00
1 2/3
3,90
57
11,80
171
* Higher temperature and pressure resistant construction available.
www.venair.com
5
SILICONE HOSES WITH INTERNAL SPIRAL
FOR HEATING AND COOLING SYSTEMS
VENA® SIL 700V
Highly flexible plain silicone hose
Material: Silicone VMQ (Vinyl Methyl Quality)
Structure: Spiral steel wire between some plies of polyester
fabric covered in blue silicone.
Temperature range: -60ºC to +180ºC (-76ºF to +356ºF)
Length: From 1 to 4m (3,8 to 13,12ft). Can be cut to smaller
lengths upon customer request.
Main characteristic: High flexibility due to the wire spiral.
Smooth inner and outer appearance.
Suitable for use where a small bending radius is required.
Inner
diameter*
mm
10
13
16
18
19
22
25
28
30
35
38
40
inch
3/8
1/2
5/8
5/7
3/4
7/8
1
1 1/8
1 3/16
1 3/8
1 1/2
1 9/16
Working
pressure**
Bursting
pressure**
Bending
radius
ISO 1402:2009
ISO 1402:2009
ISO 1746:2000
bar
12,45
11,30
10,39
9,87
9,64
8,99
8,44
7,94
7,64
6,96
6,60
6,38
bar
37
34
31
30
29
27
25
24
23
21
20
19
mm
69
75
82
87
90
98
107
116
123
143
156
165
psi
181
164
151
143
140
130
122
115
111
101
96
93
psi
537
493
450
435
421
392
363
348
334
305
290
276
inch
2 5/7
3
3 2/9
3 3/7
3 1/2
3 6/7
4 1/5
4 4/7
4 5/6
5 5/8
6 1/7
6 1/2
Inner
diameter*
mm
45
48
51
55
60
63
70
76
80
85
90
100
inch
1 3/4
1 7/8
2
2 1/8
2 3/8
2 1/2
2 3/4
3
3 1/8
3 1/3
3 1/2
4
Working
pressure**
Bursting
pressure**
Bending
radius
ISO 1402:2009
ISO 1402:2009
ISO 1746:2000
bar
5,86
5,58
5,32
4,98
4,60
4,39
3,93
3,57
3,34
3,08
2,83
2,37
bar
18
17
16
15
14
13
12
11
10
9
8
7
mm
191
208
227
255
294
321
394
468
526
608
703
939
psi
85
81
77
72
67
64
57
52
48
45
41
34
psi
261
247
232
218
203
189
174
160
145
131
116
102
inch
7 1/2
8 1/5
9
10
11 4/7
12 2/3
15 1/2
18 3/7
20 5/7
24
27 2/3
37
VENA® SIL 800
Highly flexible convoluted
silicone hose
Material: Silicone VMQ (Vinyl Methyl Quality)
Structure: Spiral steel wire between some plies of polyester
fabric covered in blue silicone.
Temperature range: -60ºC to +180ºC (-76ºF to +356ºF)
Length: From 1 to 4m (3,8 to 13,12ft). Can be cut to smaller
lengths upon the request of the customer.
Main characteristic: High flexibility due to the wire spiral.
Corrugated inner and outer appearance. Suitable for use
where a very small bending radius is required.
Inner
diameter*
mm
10
16
18
25
28
30
32
38
40
42
45
50
inch
3/8
5/8
5/7
1
1 1/8
1 3/16
1 1/4
1 1/2
1 9/16
1 5/8
1 3/4
2
Working
pressure**
ISO 1402:2009
bar
10,48
8,63
8,17
6,89
6,44
6,17
5,92
5,24
5,04
4,85
4,58
4,17
psi
152
125
118
100
93
89
86
76
73
70
66
60
Bursting
pressure**
Bending
radius
ISO 1402:2009
ISO 1746:2000
bar
31
26
25
21
19
19
18
16
15
15
14
13
mm
46
49
51
59
64
67
71
84
89
94
103
119
psi
450
377
363
305
276
276
261
232
218
218
203
189
inch
1 4/5
2
2
2 1/3
2 1/2
2 2/3
2 4/5
3 1/3
3 1/2
3 5/7
4
4 2/3
Inner
diameter*
mm
51
52
53
55
60
63
70
76
80
90
100
inch
2
2
2
2 1/8
2 3/8
2 1/2
2 3/4
3
3 1/8
3 1/2
4
Working
pressure**
Bending
radius
ISO 1402:2009
ISO 1402:2009
ISO 1746:2000
bar
4,09
4,01
3,94
3,79
3,45
3,26
2,85
2,53
2,33
1,86
1,45
bar
12
12
12
11
10
10
9
8
7
6
4
mm
122
125
129
136
156
168
200
231
253
313
380
psi
59
58
57
55
50
47
41
37
34
27
21
* Other diameters can also be manufactured. Please consult.
** Pressure data is noted at ambient temperature. Pressure values should be reduced by 20% for each increase of 100ºC (212ºF)
6
Bursting
pressure**
psi
174
174
174
160
145
145
131
116
102
87
58
inch
4 4/5
5
5
5 1/3
6 1/7
6 3/5
7 7/8
9
10
12 1/3
15
SILICONE HOSE FOR TURBOCHARGER
SYSTEMS - INTERCOOLER
VENA® SIL TURBO
TURBOLOADER
External material: Silicone VMQ (Vinyl Methyl Quality)
Internal material: Silicone FVMQ (Fluor Vinyl Methyl Quality)
Textile reinforcement: Aramide
Temperature range: -60ºC to +200ºC, up to 220ºC for short
periods of time. (-76ºF to 392ºF, up to 428ºF for shorts periods
of time).
Standard length: All of our standard or customized products
can be produced with this option. Corrugated compensators
are available (See table below).
Application: Specifically used in turbocharger systems for
industrial vehicles, due to its high capacity to withstand
hydrocarbons and/or oil particles in the cooling pressurised
air.
Alternatives:
a. FKM material instead of FVMQ silicone.
b. Standard VMQ silicone instead of FVMQ silicone.
ID Diameter*
mm
50
50
60
60
65
70
70
76
76
80
80
85
89
89
89
89
89
95
100
100
100
100
114
Rings
inch
2
2
2 1/3
2 1/3
2 5/9
2 3/4
2 3/4
3
3
3 1/7
3 1/7
3 1/3
3 1/2
3 1/2
3 1/2
3 1/2
3 1/2
3 3/4
4
4
4
4
4 1/2
Humps
3
5
3
5
4
3
5
3
5
4
7
4
2
3
5
6
7
5
3
5
6
7
4
Total length
mm
160
200
160
200
200
160
200
160
200
200
300
200
100
160
210
250
300
210
160
210
250
300
200
2
4
2
4
3
2
4
2
4
3
6
3
1
2
4
5
6
4
2
4
5
6
3
Cuffs
inch
6,3
7,9
6,3
7,9
7,9
6,3
7,9
6,3
7,9
7,9
11,8
7,9
3,9
6,3
8,3
9,8
11,8
8,3
6,3
8,3
9,8
11,8
7,9
mm
64
114
64
114
88
64
114
64
114
88
164
88
38
64
114
138
164
130
64
114
138
164
88
inch
2,5
4,5
2,5
4,5
3,5
2,5
4,5
2,5
4,5
3,5
6,5
3,5
1,5
2,5
4,5
5,4
6,5
5,1
2,5
4,5
5,4
6,5
3,5
VENA® SIL TURBO
REDUCER
Inner diameter*
Humps
mm
inch
76/51
3>2
1
89/63
3 1/2 > 2 1/2
Rings
Total length
mm
inch
2
127
5
2
3
152
6
89/76
3 1/2 > 3
2
3
152
6
102/76
4>3
2
3
152
6
102/76
4>3
1
2
127
5
102/89
4 > 3 1/2
1
2
102
4
102/89
4 > 3 1/2
2
3
152
6
* Other diameters can also be manufactured. Please consult.
www.venair.com
7
VENA® VITOSIL
Silicone hoses with an inner layer of FKM for conveying fuel,
oils and chemical products.
Excellent resistance to ozone and atmosphere in the harshest
of outdoor environments.
All of our standard or customized products can be produced
with this option.
SPECIAL APPLICATIONS
Engineered and manufactured
to your exact specifications
VENA® SIL 200 R/A
Oil-resistant silicone hose
External material: Silicone VMQ (Vinyl Methyl Quality)
Internal material: Silicone R/A (Oil-Resistant)
Textile reinforcement: 3 plies of polyester fabric
Temperature range: -60ºC to 180ºC (-76ºF to 356ºF)
Standard wall thickness: 4,2mm (+1/-0,5mm) / 0,17’’ (+0,04/0,02’’)
Length: From 1 to 4m (3 to 13ft). Can be cut to smaller lengths
upon request.
Smooth outer and inner appearance. Suitable for use in
straight lengths, with no bending requirements.
Application: Suitable for engine oils and other mineral oils up
to +150ºC (302ºF) service temperature.
Diameter*
mm
6
8
10
13
16
18
19
22
25
28
30
32
35
38
40
44
45
inch
1/4
1/3
3/8
1/2
5/8
5/7
3/4
7/8
1
1 1/8
1 3/16
1 1/4
1 3/8
1 1/2
1 9/16
1 3/4
1 3/4
Working
pressure**
ISO 1402:2009
bar
16,17
14,03
11,50
9,70
8,27
7,50
7,27
6,17
5,90
5,40
5,13
4,90
4,57
4,30
4,13
3,83
3,77
psi
235
203
167
141
120
109
105
89
86
78
74
71
66
62
60
56
55
Bursting
pressure**
ISO 1402:2009
bar
48,50
42,10
34,50
29,10
24,80
22,50
21,80
18,50
17,70
16,20
15,40
14,70
13,70
12,90
12,40
11,50
11,30
psi
703
611
500
422
360
326
316
268
257
235
223
213
199
187
180
167
164
Diameter*
mm
48
50
51
53
55
57
60
62
63
65
70
76
80
83
90
100
inch
1 7/8
2
2
2
2 1/8
2 1/4
2 3/8
2 4/9
2 1/2
2 5/8
2 3/4
3
3 1/8
3 1/4
3 1/2
4
Working
pressure**
ISO 1402:2009
bar
3,60
3,47
3,43
3,33
3,23
3,13
3,03
2,97
2,93
2,83
2,70
2,50
2,30
2,17
1,90
1,67
* Other diameters can also be manufactured. Please consult.
** Pressure data is noted at ambient temperature. Pressure values should be reduced by 20% for each increase of 100ºC (212ºF)
8
psi
52
50
50
48
47
45
44
43
42
41
39
36
33
31
28
24
Bursting
pressure**
ISO 1402:2009
bar
10,80
10,40
10,30
10,00
9,70
9,40
9,10
8,90
8,80
8,50
8,10
7,50
6,90
6,50
5,70
5,00
psi
157
151
149
145
141
136
132
129
128
123
117
109
100
94
83
73
VENA® SIL GLASS
Straight silicone hose reinforced with
fiberglass for high temperatures
Material: High temperature resistant silicone
Textile reinforcement: Fiberglass
Temperature range: -60ºC to 235ºC, up to 250ºC for short
periods of time (-76ºF to 455ºF, up to 482ºF for short periods
of time)
Length: From 1 to 4m (3 to 13ft). Can be cut to smaller
lengths upon request.
Smooth inner and outer appearance. Suitable for use in
straight lengths, with no bending requirements.
It is possible to produce any special shaped hose (e.g. elbow,
reducer, etc.) upon request.
High temperature resistant
ALU protections
Special aluminum coated fiberglass designed to protect
a specific area or the whole silicone hose where focused
high temperatures are present.
All of our standard or customized products can be
produced with this option.
Custom engineered hose-fitting
combination
Fasteners which loosen due to vibration are a challenge
in well-supported engine blocks. To keep engines blocks
sealed and prevent leaks we offer different types of hose/
fitting combinations.
These custom engineered connections help the engine block
to withstand extreme heat and vibration, while reducing cost,
assembly and warranty issues.
www.venair.com
9
Custom engineered shapes
From one-piece projects to serial production we support
manufacturers and engineers in developing and producing
hoses which fulfill all of your system requirements.
Our silicone shapes are engineered and manufactured
according to the customer’s needs, so that we deliver in
accordance to drawing specifications or samples supplied
by the customer.
We produce hoses with a wide variety of constructions
with different characteristics and mechanical properties so
we can meet virtually all your requirements.
Custom engineered ducting
Custom engineered ducting is produced with layers of
fiberglass coated with SILICONE or NEOPRENE with steel
wire spiral inside the tube.
All of our custom engineering ductings maintain the
following main characteristics, light-weight construction
in combination with high mechanical strength, flexibility,
temperature resistance, and comply with the latest
safety properties (flame, smoke, and toxicity). A special
construction compliant with the M1 fire (UNE. 23.727-90) and
F1 (NF F16-101) fume classification is also available.
VENA® MT/MTD
VENA® HT/HTD
MT: One layer of fiberglass with neoprene and visible steel
wire spiral inside the hose.
MTD: Two layers of fiberglass with neoprene and steel wire
spiral between the layers.
It is possible to produce a special F1-M1 classification upon
request.
Temperature range: -55ºC to 125ºC (-67ºF to 257ºF)
Length: From 1 to 6m (3 to 19ft) depending on the diameter.
Available in diameters between 13 and 300mm (1/2’’ to 12’’).
HT: One layer of fiberglass with silicone and visible steel wire
spiral inside the hose.
HTD: Two layers of fiberglass with silicone and steel wire spiral
between the layers.
Medium temperature
10
High temperature
Temperature range: -55ºC to 260ºC (-67ºF to 500ºF).
Up to 300ºC (572ºF) for shorts periods of time.
Length: From 1 to 6m (3 to 19ft) depending on the diameter.
Available in diameters between 13 and 300mm (1/2’’ to 12’’).
Main standards and certifications
- Fire behavior according to UNE EN 23.727-90
- Burning behavior I and M rating, and smoke and toxicity F rating according to NF
F 16 101 with smoke density test according to NF X 10-702 and toxicity test
according to NF X 70-100
- Burning behavior of material according to DIN 54837:2007, smoke development
and toxicity according to DIN EN ISO 5659-2:2007 and DIN 5510-2:2009
- Flame propagation according to UL94
- Specific Optical Density of Smoke Generated by Solid Materials according to
ASTM E662
- Surface Flammability of Materials according to ASTM E162
- Toxic gas generation from materials in combustion according to BSS 7239
- SAE J20 Class A for cooling systems
- SAE J2006 style R1-R3 for Marine Exhaust hose
-
Vertical flammability test according to FAR/CS 25.853 Appendix F, Part I (a)(1)(ii)
Horizontal flammability test according to FAR/CS 25.853 Appendix F, Part I (a)(1)(iv)
Optical density test according to AIRBUS DIRECTIVE ABD0031 and AITM 2.0007 B
Smoke and toxicity test according to AIRBUS DIRECTIVE ABD0031 and AITM
3.0005
- UNI CEI 11170-3 for air hoses used in the railway industry
- SAE J2006 style R1-R3 and ISO/DIS 13363 for Marine Exhaust hose certified by
DNV
- Marine Exhaust Hoses Approved by Lloyd’s Register
Any other specific Certifications according to specific customer requirements.
Venair office.
Sales Offices
America
Europe
Miami | Santa Monica
usasales@venair.com
T. +1 305 362 8920
Germany
kontakt@venair.com
T. +49 07141 9748653
Brazil
brsales@venair.com
Spain
info@venair.com
T. +34 93 786 4860
Asia
Shanghai
cnsales@venair.com
T. +86 021-3868 8806
Beijing
cnsales@venair.com
T. +86 010-5982 2451
Bangalore
insales@venair.com
T. +91 804 901 6515
Vietnam
vnsales@vinasil.com
T. +84 837 700 360
Italy
commerciale@venair.com
T. +39 0131 243903
France
contact@venair.com
T. +33 437 85 08 60
Poland
plsales@venair.com
T. +48 616 792 487
UK
uksales@venair.com
T. +44 0141 952 4943
Switzerland
chsales@venair.com
IMPORTANT:
It is the user’s responsibility to ensure the suitability and safety of the VENAIR products for all intended uses. All the tests must be conducted in accordance with applicable regulatory requirements in order
to determine the safety and effectiveness for use of the hoses in any particular application.
Limited Warranty: For a period of 6 months from the date of sale, VENAIR warrants this product to be free from defects in materials and workmanship. Our only obligation will be to replace any portion
proving defective, or at our option, to refund the purchase price thereof. User assumes all other risk, if any, including the risk of injury, loss or damage, direct or consequential, arising out of the use,
misuse, or inability to use, this product. THIS WARRANTY IS IN LIEU OF THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, AND ALL OTHER WARRANTIES, EXPRESSED OR
IMPLIED. No deviation is authorized. VENAIR assumes no obligations or liability for any advice furnished by it, or for results obtained with respect to those products. All such advice is given and accepted
at the buyer’s risk.
Vena, Venair and the Venair logo are trademarks of Venair Ibérica SA.
www.venair.com
CAT 43 REV 00 EN-UK
Copyright 2013 | Venair Group | All rights reserved
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising