2017 Harley-Davidson FLHTP Electra Glide Police Motorcycle

2017 Harley-Davidson FLHTP Electra Glide Police Motorcycle
(Sample Specifications and Description)
®
®
2017 Harley-Davidson FLHTP Electra Glide Police Motorcycle
QUANTITY: [Insert Quantity] 2017 Harley-Davidson® FLHTP (Ducted Fairing with Windshield)
Electra Glide® Solo Law Enforcement Motorcycle
SCOPE OF SPECIFICATIONS
These specifications describe the mechanical and comfort requirements for the 2017 FLHTP Solo
Law Enforcement Motorcycle which will be used by the [insert agency/department name].
SPECIFICATIONS
All proposed FLHTP motorcycles to be in full compliance as follows:
A. Engine
Piston displacement of not less than 1746cc Milwaukee-Eight™ 107 cubic inch, pushrod-operated,
overhead valves with hydraulic, self-adjusting lifters, four valves per cylinder and featuring EITMS
(Engine Idle Temperature Management System), producing minimal vibration frequencies and
magnitudes. Engine and transmission isolated from motorcycle frame utilizing a rubber mounting
system.
 Powertrain deluxe chrome group designed for low maintenance; black powder coat finish on
engine; chrome rocker boxes, timer cover, outer primary housing & transmission covers.
 Compression ratio: 10.0:1
 Electronic Sequential Port Fuel Injection System (ESPFI)
 Single Cam design
 Hydraulic Lifters requiring no maintenance service adjustments
 Air and Oil cooled
 Fan-assisted oil cooler
B. Clutch / Transmission
 Clutch shall be of the latest assist and slip nine (9) plate design, wet.
 Hydraulically Actuated Clutch system
 Transmission to be of latest design, manual type, with not less than six (6) forward speeds.
 Clutch disengage for starter motor operation
 Primary Drive, double-row chain, 34/46 ratio.
 Greaseless shifter shaft with “anti-vibration” rubber spacers.
 Gear Ratios: 1st
9.593
2nd
6.650
3rd
4.938
4th
4.000
5th
3.407
6th
2.875
C. Brakes
 Reflex™ Linked Braking with ABS, linking disengages below 25 mph
 Hydraulic Disc brakes for both front and rear wheels
 Front brakes having dual 11.81-inch diameter floating discs
 Rear brake having a single disc.
 Brakes shall be relatively free of heat fade
 Calipers-4 Piston
 Uniform Expanding Rear Rotor
.
D. Suspension
Motorcycles shall be provided with a suspension system to permit optimum handling conditions as
required in law enforcement.
• Front suspension uses Showa® Dual Bending Valve (SDBV™) technology and gives you 117 mm of
travel; improved damping performance over the range of suspension travel
• Hand-adjustable emulsion rear shocks provide 15-30% more preload adjustment and adjust with the
turn of a single knob, no tools required; improved damping performance over the range of
suspension travel
• 49 mm telescopic front forks.
• Rear suspension swing arm bearings shall require no lubrication for life of the motorcycle.
E. Wheels / Tires
 Black Impeller™ Cast Aluminum wheels, rim material to be impermeable to compressed air.
 Tubeless type tires to have non-skid tread, designed to operate on paved highways and shall
have a full, four-ply fabric reinforcement.
 Bead-retention tires designed to remain on wheel during sudden loss of pressure.
 Sealed automotive style wheel bearings requiring no endplay adjustment and service interval of
100,000 miles (160,000 km).
F. Fuel Tank
 Fuel tank to have a capacity of 6 U.S. gallons (22.71 liters). Must provide a minimum of 1 gallon
(3.8 L) reserve fuel capacity when main supply is exhausted.
 Electric fuel pump.
G. Electrical System
Electrical system shall be nominal 12-volt as follows:
 Battery. Sealed, heavy-duty maintenance-free, 12-volt, minimum rated capacity – 28 ampere
hours (Battery Council International rating), 270 cold cranking amps.
 Ignition. Non-waste spark, alpha control.
 Charging System. Three-phase, 48-amp high output alternator producing 28 amps at idle, solid
state regulator.
 Connectors. Industrial grade throughout, provided with electrical accessory connection.
 Hand Controls. Water-resistant, integrated switches.
 Starting System. 12-volt starter, solenoid operated engagement, relay required.
 Horn. Sound level audible above motorcycle and traffic-generated noise.
H. Lighting
Each motorcycle shall be provided with the following lighting equipment:
 Daymaker™ LED Headlight
 Front Emergency Lamps PAR-36, one red and one blue (incandescent).
 Tail light.
 Turn Signals, self-canceling system.
 Flashers, four-way, with independent switch.
 License plate lighting with two blue marker lamps
 Front Fender Tip Light-amber
I. Visual Displays
 Speedometer. Analog & Digital speedometer, range 0-120mph (or kph equivalent),
 (2) re-settable trip meters.
 Speed Capture with Digital Speed Display
 Gear Indicator
 Odometer. Calibrated, cumulative.
















Tachometer. Analog.
Fuel level gauge.
Voltmeter gauge
Emergency Light Activation Indicators, separate indicators for front and rear emergency lights.
Stealth Mode indicator-if activated
Cruise Control indicator
Sight glass on brake master cylinders.
Fuel Mileage countdown till empty displayed in odometer window when Low fuel indicator lamp
is lit.
Turn Signal Indicators
Hazard-Warning Lights Indicator
Neutral Indicator
High beam Indicator
Low Oil pressure Indicator
Engine diagnostic light
ABS indicator lamp
Security Lamp (if equipped with optional security system)
J. Feature Requirements
 Seat. Deluxe solo saddle, special police type, breathable material covering, adjustable coil over
spring suspension system.
 Cruise Control-OE standard
 Stealth Mode-optional activation
 Push to Talk Switch-requires other police radio equipment not supplied by H-D
 Power ON for emergency equipment for 30 minutes with ignition OFF
 Analog and Digital Speed Display with Speed Capture feature
 Gear Indicator
 Side Stand. Jiffy stand with electronic disengage to prevent drive off with jiffy stand deployed.
 Foot Boards. pivoting type with non-skid rubber pads.
 Guards. Front engine guard bar and rear saddlebag guard bars. *Horizontal Saddlebag RailsOptional*
 Saddlebags. Factory installed, law enforcement type Injection Molded GTX saddlebags,
approximately 2000 cubic inches of storage space per bag, water-resistant, utilizing one touch
operation latches.
 Final belt drive, with a rubber isolated 68 tooth rear drive sprocket.
 Chrome, two into one into two exhaust system
 Windshield. Constructed of clear polycarbonate, designed to break away with minimal force.
 Mirrors. Two (2) long stem true image mirrors.
 Key. One key fits all locks.
 Wheelbase. 64 inches (1625 mm).
 Laden Seat Height. 27.3 inches (695 mm)
 Gross Vehicle Weight Rating. 1360 lbs. (617 kg.)
 Dry Weight. 809 lbs. (367 kg.)
 Running Order. 845st lbs. (384 kg.)
 Service Intervals. 1 1000 miles and then every 5000 miles thereafter.
 Warranty. 24 months, unlimited mileage.
**Specifications apply for both Domestic and California Configurations.
.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising