to FBT Speakers Verve 8MA PDF
FBT Products
Active Speaker – Verve Series
Verve 8MA
150W + 50W - 117 dB SPL Coaxial Active Monitor Speaker Systems
Features:
> 2-way, bass-reflex, bi-amplified speaker system
> 1 x 8” (2” VC) B&C® woofer
> 1 x 1”exit (1.4” VC) B&C® coaxial mount compression driver
> 100°H x 100°V constant directivity horn
> 150W rms Class G woofer amplifier
> 50W rms Class AB (HF) driver amplifier
> Advanced protection circuits with dynamic equalization of the low frequencies and limiter
> High S/N ratio, 24dB/oct active filters for the preamp section
> Control panel with: ground-Lift, XLR input and output, limiter and protection LEDs, volume control
> 11-layer birch plywood scratch resistant enclosure (15mm / 0.59”). 45°monitor taper
> 4 x M6 omni-mount rigging points
> Specifically designed frequency response for nearfield use as monitor
> Exceptional coherent sound diffusion over the entire dispersion angle without lobbing normally
associated with conventional two-way enclosures
1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising