light/set - National Incontinence

light/set - National Incontinence
| LIGHT/SET START/STOP
MODE
To set alarm/vibration
ON/OFF.
6 individuals alarms/vibrations can be set
to alarm/vibrate together or to
~~ alarm/vibrate separately.
Press MODE until it comes to ALARM
mode.
— Press START/STOP to set between
Alarm (beeps) ,Vibration or Alarm +
~ Vibration.
(«en)= Alarm (beeps)
$sss= Vibration
— There are total 6 alarm bell icons on the
display, each alarm bell icon represent
one preset alarm/vibration time. The
— watch will alarm/vibration on each of the
preset time when the respective alarm
bell icon is on. You can set the watch to
alarm/vibration on 6 different preset times
~ when all the 6 alarm bell icons are all on.
BEL
Chronograph
Press MODE until CHRO appears.
Press START/STOP to start.
Press START/STOP to pause.
Press START/STOP to resume.
Press SPLIT/RESET to view split time,
Press again to see running time.
Add: Press start/stop to stop
When CHRONO stopped, press
SPLIT/ RESET to reset CHRONO.
WobL
Instructions
“the world’s smallest vibrating watch”
BASIC OPERATIONS
Press MODE to cycle through ALARM,
TIMER,CHRONO and TIME modes.
Press LIGHT to illuminate watch face.
To view time in any mode, press
MODE until time is displayed. Press
any button to stop alarm or timer
beeps/vibrations.
To display HOUR-MINUTE,
MONTH-DAY and SECONDS.
Under TIME mode press START/
STOP to cycle display
HOUR — MINUTE — SECONDS,
MONTH — DATE.
Alarm (beeps) Alarm Mode
6 alarm
bell icons
(Alarm ON)
Vibration(ON)
— Countdown and Stop(ON):
Countdown and Repeat :
To set countdown Timer
Press MODE until TIMER appears.
Press LIGHT/SET and hold for 2
seconds, SECONDS digits will flash.
Press START/STOP to advance
seconds.
Press MODE to select MINUTES,
press START/STOP to advance.
Press MODE to select HOURS, press
START/STOP to advance.
Press LIGHT/SET when done.
Press START/STOP to start timer.
When Timer is running the TIMER
icon will flash.
Press START/STOP to pause, press
again to resume.
To set time, date and month.
Press LIGHT/SET and hold for 2
seconds and release, SECONDS
digits will flash.
Press START/STOP to set seconds to
00
Press MODE to select minutes,
MINUTES digits will flash.Press
START/STOP to advance minutes.
Press MODE to select hour, HOUR
digits will flash. Press START/STOP to
advance hours. Go through 12 hours
for AM or PM.
Press MODE to select date, DATE
digits will flash, Press START/STOP to
advance date.
Press MODE to select month, MONTH
digits will flash. Press START/STOP to
advance month.
Press LIGHT/SET when done.
To set the 6 individual alarm
times.
Press MODE until it comes to Alarm
mode.
Press SPLIT/RESET to select one of
the 6 alarm time.A1— A2— A3—...A6.
ALARM
e
Press LIGHT/SET and hold for 2
seconds.
Press START/STOP to advance
minutes.
Press MODE to select HOURS , press
START/STOP to advance hours.
Press LIGHT/SET when done.
When Alarm is on, bell icon will be
displayed.
To Set Countdown Alarm Functions
The countdown timer can be set to alarm,
vibrate, or both alarm/vibrate. To set the alarm
function press MODE until it comes to ALARM
mode. Press START/STOP to set between
Alarm (beeps), Vibration, or Alarm + Vibration.
(Co) = Alarm (beeps)
555% = Vibration
Then countdown timer can be set to stop or
repeat by pressing MODE until TIMER
appears. Press SPLIT/RESET to select TIMER
mode.
© - Countdown and Stop
® - Countdown and Repeat
Note: A repeating countdown alarm will cause
the watch to alarm and/or vibrate for 5 seconds
when countdown ends and then repeat again
until stopped.”
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising