HD IP Encoder Features Description Ordering

HD IP Encoder Features Description Ordering
HD IP Encoder
The PD100 is a low cost MPEG-2 or H.264 single channel encoding device used to stream video and audio across any IP network. The
unit can be used in CATV systems, security or hospitality applications where linear IP video is required. The PD100 accepts HDMI in the
clear, component or composite video input and audio input via embedded HDMI, digital S/PDIF or analog.
HDMI, component, and composite inputs with auto detection
Dual mode: H.264 / MPEG-2 selectable
Video resolution: up to 1080p
Audio format: MPEG-1 LII
AC-3 2.0 encode & 5.1 pass-through
Easy installation and use
Remote control and monitoring via an easy-to-use web browser
IP output
Closed Caption supported
Ethernet (Output)
1 GbE, RJ-45
USB (Optional)
USB 2.0
Video Input
HDMI (clear), YPbPr, composite
Audio Input
Analog, S/PDIF (coax, optical)
Video Format
MPEG-2, H.264
Audio Format
MPEG-1 LII, AAC, AC-3® 2.0 encode & 5.1 pass-through
480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Video Bitrate
MPEG-2 HD: 10 Mbps to 20 Mbps, MPEG-2 SD: 2 Mbps to 8 Mbps
H.264 HD: 2 Mbps to 10 Mbps, H.264 SD: 1 Mbps to 4 Mbps
Audio Bitrate
128 Kbps, 256 Kbps, 384 Kbps
Streaming Protocols
UDP/RTP multicast or unicast, TCP unicast
Closed Caption
9.29” (L) x 5.75” (D) x 1.40” (H)
2.072 lbs
Operating Temperature
0 °C to 40 °C
Power Supply
12 VDC, 1.5 A
500 mA
Ordering Information
HD IP Encoder
Replacement Power Supply for PD100
www.picodigital.com Copyright © 2017 Pico Digital Inc., an ATX Networks company. All right reserved.
Information in this document is subject to change without notice. Pico Digital and the Pico Digital logo are trademarks of Pico Digital Inc. REV09.05.17v1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF