Aerohive AP141
datasheet
Aerohive AP141
802.11n Dual Radio access point
AEROHIVE NETWORKS AP141 access points provide 2x2:2 802.11n wireless access as well as
optimized RF performance and enhanced receive sensitivity to provide a ground-breaking user
experience for networks supporting multiple types of clients, including consumer-grade and
bring-your-own devices (BYOD).
The Aerohive AP141 is a cost-effective, enterprise-grade 2x2 MIMO solution, which is ideal for
education, healthcare, and distributed enterprise environments. With two radios, concurrent
2.4Ghz and 5Ghz access, and security scanning across both bands, the AP141 provides top
performance and security at an entry-level price point.
The AP141 also provides both automatic mesh redundancy and support for 802.11a, b, g, and n
clients using Aerohive’s unique and resilient Cooperative Control architecture.
The Aerohive AP141 shares mounting kits and power supplies with the Aerohive AP330 and
AP350, making sparing, re-ordering, stocking, and inventory management seamless.
Software Features
HiveOS
The Aerohive Networks AP141 is a
cost-effective, enterprise-grade (2x2)
MIMO solution, ideal for education,
healthcare and distributed enterprise
environments.
All Aerohive APs support the feature-rich HiveOS service architecture. HiveOS is an
implementation of Aerohive’s Cooperative Control Architecture which enables multiple APs to
organize into groups or “hives,” that share control information enabling functions such as fast
layer-2/ layer-3 roaming, cooperative RF management, security and mesh networking without
requiring a dedicated system controller. The resulting feature-rich capability enables a next
generation wireless LAN architecture, called a Cooperative Control Wireless LAN Architecture.
This architecture provides the benefits of a controller-based implementation, yet has a lower
deployment/ownership cost, is more reliable, more scalable, higher performing and more suitable
for today’s proliferation of wireless applications than controller-based architectures.
For product information on HiveOS, visit aerohive.com/products/software-management/
hiveos.
Network Management Solutions
Aerohive’s HiveManager NMS is a central management solution for Aerohive APs. HiveManager
supports simple policy creation, firmware upgrades, configuration updates, and centralized
monitoring throughout the entire Aerohive deployment, whether building-wide, campus-wide, or
global - all from a single console. Because the HiveManager is not actively involved in passing
traffic or in making forwarding decisions, it eliminates the traffic bottlenecks and complexities of
controller-based solutions, particularly in geographically distributed environments. As a result,
control is distributed, while management is centralized. Essentially, the HiveManager solution
delivers the benefits of both autonomous APs and controller-based solutions, without the
drawbacks of either approach.
Aerohive’s HiveManager NMS can be delivered two ways:
• HiveManager Online—a cloud-based management service from Aerohive
• HiveManager VMware virtual appliance—an on-premise VM management solution
For more information visit aerohive.com/products/software-management/hivemanager.
Warranty and Support
Aerohive Networks, Inc.
330 Gibraltar Drive
Sunnyvale, California 94089 USA
phone 408.510.6100
toll-free 866.918.9918
fax 408.510.6199
www.aerohive.com
Every Aerohive Networks device is backed by a limited lifetime hardware warranty. Extended
product and technical support may be purchased separately and can include next day advanced
replacement, 24x7 or 8x5 technical support, web and email support access, and software
updates. For complete support terms go to
www.aerohive.com/support.
DS1214107
RF Coverage Maps
5 Ghz Horizontal
XY axis
• Desktop
• Wall Mount bracket included
• Ceiling Tile Clips 15/16” included, 9/16” sold as an accessory
• Suspend Mount sold as an accessory
• Plenum Mount sold as an accessory
Physical Security
0
-20
90°
-20
180°
180°
0° 10dB
2.4Ghz Vertical
XZ axis
0
-20
-20
180°
180°
Power and Sensitivity Table
2GHz
Interfaces
• Autosensing 10/100/1000 Base-T Ethernet Port
• Power over Ethernet (PoE) capable (802.3af) Ethernet Port
(Eth0)
• 1x Reset Pinhole
• USB 2.0 port reserved for future use
• RJ-45 console port
0
-10
270°
Antennas
0° 10dB
-10
90°
2.4Ghz Horizontal
XY axis
0
-10
270°
• 802.11a: 1,2,5.5 and 11Mbps
• 5.150–5.850 GHz Operating Frequency
• Orthogonal Frequency Division Multiplexing
(OFDM)
Modulation
• 24 dBm Transmit Power
• Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback
• 802.11b: 1,2,5.5 and 11Mbps
• 2.4–2.5 GHz Operating Frequency
• Direct-Sequence Spread-Spectrum (DSSS) Modulation
• 20 dBm Transmit Power
• Rates (Mbps): 11, 5.5, 2, 1 w/ auto fallback
• 802.11g: 6,9,12,18,24,36,48, and 54 Mbps
• 2.4–2.5 GHz Operating Frequency
• Orthogonal Frequency Division Multiplexing
(OFDM) Modulation
• 22 dBm (100 mW) Transmit Power
• Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback
• 802.11n (HT20/HT40): MCS0 -MCS7
• 2.4–2.5 GHz & 5.150–5.950 GHz Operating Frequency
• 802.11n Modulation
• 24 dBm Transmit Power
• Rates (Mbps): MCS0 - MCS15 (6.5MBps - 300Mbps)
• 2x2 Multiple-In, Multiple-Out (MIMO) Radio
• HT40 High-Throughput (HT) Support
0° 10dB
-10
270°
Dual Concurrent Radios (b/g/n + a/n)
• 2x RP-SMA 2.4GHz antenna connections for external
antennas
• 2x RP-SMA 5GHz antenna connections for external antennas
• Antennas available for separate purchase
5 Ghz Vertical
XZ axis
270°
• Kensington security lock point
0° 10dB
90°
Mounting
90°
Product Specifications
Rate
5Ghz
Tx Power
Rx Sensitivity
Tx Power
Rx Sensitivity
21
-100
n/a
n/a
21
-93
n/a
n/a
20
-95
19
-95
16
-80
14
-80
20
-95
19
-91
14
-77
14
-74
20
-95
19
-91
802.11b
1 Mbps
802.11b
11 Mbps
802.11g/a
6 Mbps
• 6.69” W x 1.63” H x 6.69” D
(170 mm W x 41 mm H x 170 mm D)
• 13.5 oz (0.42 kg),
802.11g/a
54 Mbps
MCS0
Environmental
802.11n HT20
MCS7
• Operating: 0 to +40°C, Storage: -40 to +85°C
• Humidity: 95% RH (non-condensing)
802.11n HT20
MCS8
Environmental Compliance
802.11n HT20
MCS15
14
-77
17
-74
• Plenum rated
802.11n HT40
MCS0
19
-92
19
-88
802.11n HT40
MCS7
14
-74
14
-71
Physical
Power Options
• 802.3af Power over Ethernet (PoE) port
• 12V, 2A DC external power adapter (sold separately)
Power Specifications
• AC/DC power adapter:
–Input: 100–240 VAC –Output: 12V/2A
• PoE nominal input voltages: 48V, 0.35A (802.3af)
• Typical power consumption: 8w
• RJ-45powerinputpins:Wires 4,5,7,8or1,2,3,6
802.11n HT20
802.11n HT40
MCS8
19
-92
19
-88
802.11n HT40
MCS15
14
-74
14
-71
SKU
Description
Transmit Power and Receive Sensitivity
Aerohive APs
• See chart at right
AH-AP-141-N-FCC
Aerohive AP141, Plenum Rated, two 802.11a/b/g/n radio, one 10/100/1000
Ethernet (PoE), FCC regulatory domain w/o power supply
AH-AP-141-N-W
Aerohive AP141, Plenum Rated, two 802.11a/b/g/n radio, one 10/100/1000
Ethernet (PoE), configurable regulatory domain w/o power supply
AP Accessories
AH-ACC-PWR-24W-US, -UK, -EU
24W power supply and US power plug for AP330, AP350, AP121, AP141
AH-ACC-INJ-20W-US, -UK, -EU
20W POE power injector forAP100 series for US, UK, EU
AH-ACC-141-ANT-KIT
AP141 articulated indoor antenna kit (2x2.4GHz 4dBi and 2x5GHz 4dBi
antennas)
AH-ACC-ANT-4-2G
2.4GHz RP-SMA female indoor 4dBi articulated antenna for AP350 and AP141
AH-ACC-ANT-4-5G
5GHz RP-SMA female indoor 4dBi articulated antenna for AP350 and AP141
AH-ACC-SERIAL-RJ45
RJ45 to DB9 Serial Console Table
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising