E1205 D/Sheet
E1205
Avery Weigh-Tronix Technical Specification
E1205
advanced multi-function indicator
Description
General
This specification describes the
E1205 advanced multi-function
weight indicator, capable of
stand-alone operation, or of
integration into a larger system
via serial, FieldBus and Ethernet
interfaces.
It is a microprocessor-based
industrial weighing system with up
to 100,000 displayed increments
for analysing, displaying, storing
and transmitting gross and net
weight information.
Up to 12 load cells to be
connected with the indicator
(16 with second scale).
Analogue load cells or Avery
Weigh-Tronix digital load cells
may be used.
This indicator can display weight
data from two scales
simultaneously. Both scales are
active and are independently
weighing at all times.
The E1205 can be matched to
almost any load cell system to
achieve optimum accuracy,
stability and repeatability.
The indicator can control its
surrounding process using fully
configurable I/O.
Alternatively, control can be
executed from a central system
using an extensive range of
available interfaces.
Configurable Features
The E1205 features a dual
purpose alpha-numeric keyboard
which allows any of the following
functions to be configured during
commissioning:
● Sensitivity to weight signal
● Scale capacity
● Number of divisions and
increment size
● Weighing Unit
● Ten points for linearity
correction to ensure maximum
accuracy
● Tare availability and manner of
operation
● Zero/back balance
● Time and date (two or four
digit year, battery backed)
● Decimal marker type - point or
comma
● User-definable serial output
strings
● Position of decimal marker
● Subtotal and grand total
information
● Calibration site gravity factor
● Customer site gravity factor
● Filtering using FIR or
Harmonizer™ filtering systems
● Scale ID number
● Alarm index operation
● Recipe/filling I/O
configuration
1
E1205
Avery Weigh-Tronix Technical Specification
All these characteristics are
stored in non-volatile memory so
that once the ideal parameters for
any given weighing system are
established they can be retained
with certainty for the future.
Database supports:
● Vehicles
● Hauliers
● Suppliers / Customers
● Browsing
● Outstanding vehicle report
Once the scale is set up as
required, a calibration report can
be printed showing weighing
details (useful for the installation
engineer). This allows the state of
the system to be monitored.
Three Level Pack Run
Monitoring
Set all parameters to monitor and
manage the packing of
components into boxes, and
overpacking into cartons and onto
pallets. Produce all labels as
required for tracking.
Up to 300 product look ups
(PLUs) are available for instant
recall of previously programmed
product information.
Applications
Parts Counting
Sampling modes supported: fast;
dribble; bulk
Static Checkweighing
Set limits, either absolute or
relative to target. Set checkweigh bar step size.
In-Motion Checkweighing
The indicator can be used to
control the in-motion process as
required.
Peak Hold
Records maximum weight
measured. Clear button resets
memory
Weighbridge
A broad application, offering the
following functions.
Three core operating modes ● Re-entered first weight
● Stored and printed
● Stored first weight
Additional modes:
● Public weighing
● Axle weighing (up to 10 axles)
● Part loads
● Two platform in/out operation
● Simple stock control
● Net weight adjustment (dirt
allowance)
Conversion Factor
Enter the factor required to
convert to custom unit
Recipe/Filling
Control of complete process using
fully configurable trips.
In-flight compensation and dosing
variables may be set to optimise
the process. Batching mode
allows repetition of the process
for a defined quantity.
Totalising Against Dedicated
Product Look Ups (PLUs)
Link weighings to PLUs for
complete stock control.
Product List Description and
Totalising
Create customised print-outs
itemising customer transactions,
with grand totals.
Type Through Mode
Allowing any text to be input on
the E1210 and printed out in full
on an attached printer or suitable
computer system.
Terminal Mode
Giving enhanced PC control and
power.
Remote Display Mode
Connect to, or use as a remote
display.
Specification
Electrical
Display
Type
Blue back-lit LED.
Graphics 64 x 240 pixels.
Displays up to eight digits.
Decimal Points
Configurable to any of seven
positions
Units Displayed
g, kg, lb(dec), lb oz, tons, tonnes,
custom.
Annunciators
Balance (Gross Zero)
Motion
Pre-set Tare
Semi-Automatic Tare
Net
lb or kg
Print
Three-off Trip Indicators
Minus (below net zero)
Scale 1
Scale 2
Keypad
28 keys, addressing:
Alpha entry
Numeric entry
Five soft Function keys
Dedicated Function Keys
Zero, Tare, Select, Print, Units,
Totals, Scale, PLU, Standby,
Escape, Enter, Clear, Text
Remote IBM PS/2 keyboard input
included (uses interface cable)
Load Cell Input
Analogue Input
Combined minimum load cell
impedance must be greater than
22Ω.
Maximum Load Cells if 350Ω
(One Scale)
12.
Total 350Ω Load Cells if 2nd
Analogue Input Fitted
16.
2
E1205
Avery Weigh-Tronix Technical Specification
Connection of Input
Direct wired (Buccaneer if
supplied stamped with scale).
Analogue to Digital
Convertor
Excitation
Direct current.
Display Update Rate
1, 2, 5, 10 per second.
Voltage
10 V dc.
A to D Rate
120 per second.
Current
Up to 460 mA
A to D Type
Delta Sigma.
Remote Sense
Obtained from excitation, or
Linked directly to reference input
connectors at the indicator.
Filter
FIR & Dynamic Filtering
Seven programmable Options
Input Impedance
1MΩ paralleled with 2.2nF.
Signal
6-20 mV maximum.
Associated Filter Attributes
Filter Level
Display
Weight
Noise
Noise
Response Time Sample Rate Amplitude Frequency
(seconds)
(Hz)
uV/ per Division
0.6
0
1
0.20
0.35
8.13
8.13
Resolution
Approved 10,000 (OIML)
Non- Approved 100,000
2
3
4
5
6
0.53
0.96
1.45
2.09
2.85
8.13
8.13
8.13
8.13
8.13
Calibration
Full digital multi-point (ten point)
calibration.
Increment Multiplier
1, 2, 5,10, 20, 50, 100, 200, 500.
Dynamic Filter
Applied after the FIR filter.
Set the filter window size in
divisions (0 - 99). A high value
will have a large damping effect
on the weight display.
This significantly slows the scale
response to a legitimate change
in weight.
AVR
Three stage.
Harmonizer™ Digital Filter
Three programmable parameters:
Theoretical calibration possible if
parameters known.
Provides over load report.
Gravity Compensation
Set gravity for calibration and
installation site.
Samples to Average - sets
number of A-D conversions which
will be averaged to give a weight
reading.
IIR Filter - sets how much
damping the Harmonizer™
applies to the weight reading.
Typically between 1 (low) - 8
(higher).
Lowest
Highest
Highest
Lowest
Balance/Zero
Setting
Keyboard push button.
Operation
Ignore or recall limit exceeded.
Size of Balance Range
Normally 4%, up to 100%.
Zero Indication
Within 4% of maximum capacity.
Under Range Indication
Displays ‘Under Range’.
Zero Tracking
Configurable
Motion Detection
Configurable.
Threshold Level - sets the
minimum weight change (in
calibration units) which the
Harmonizer™ will not attempt to
filter out as noise.
3
E1205
Avery Weigh-Tronix Technical Specification
Range/Span
Range of Adjustment
0 - 100,000 divisions.
Over Range Indication
Displays ‘Over Range’.
Tares
Three types of tares are available.
Each is 100% subtractive.
Note: Interlocks between the tare
types are configurable at time of
commissioning.
Type A - Push-Button (Semi
Auto) Tare
Push-button operated, semiautomatic, with selectable
negative weight display.
Cumulative taring is possible.
Initialisation and Operation
When the item to tare on is
applied, press the ‘Tare’ pushbutton.
Indication
‘Net’ annunciator is illuminated.
Type B – Keyboard (Pre-set)
Tare
Keyboard-entered tare operated
with negative weight display.
Initialisation & Operation
Enter pre-set tare value using the
0-9 keypad and press ‘Tare’ push
button. Multiple pre-set tares are
possible.
Indication
‘Net’ annunciator is illuminated
together with pre-set tare
annunciator (PT).
Type C - Stored Tare
Stored tare operated with
negative weight display allowing
40 separate stored tares. Will be
retained when power is off.
Initialisation & Operation
Press ‘pre-set tare’ push button
followed by the stored number ‘1’
to ‘40’ followed by ‘enter’ key.
When two platforms are used, 20
stored tares are available for each
platform.
Indication
‘Net’ icon is illuminated together
with preset tare icon (PT).
4
Trips
The indicator has three internal
trips as standard, and can support
up to 16 external trips via external
Trips Interface Units
(see accessories).
All trips (both internal and
external) are rated at 240 V 10 A.
Internal inputs are rated at TTL
levels.
Two modes have independent
control of the trip outputs, Alarm
and Recipe. Alarm mode
operates continuously.
Recipe mode is dependant on the
Recipe / Filling application being
configured and in operation.
Alarm Mode
Alarm mode has 10 independent
configurable indexes, and cannot
be turned off. Each index can be
programmed to operate any or all
outputs based on a given target:
● None - index inactive
● Target Weight
● Status of indicator, e.g. weight
steady, checkweigh accept
● Input (single or specific
pattern)
● Output (single or specific
pattern)
● Time
Recipe /Filling Mode
Recipe/Filling mode has 20
configurable sequential steps,
and is active only in Recipe/
Filling mode. Each recipe
(maximum 100) can be
configured independently to the
others. Each index can be
programmed to operate any or all
outputs based on a given target:
● None – index inactive
● Target Weight (includes
tolerance, compensation and
dosing parameters)
● Status of indicator, e.g. weight
steady, checkweigh accept
● Input (single or specific
pattern)
● Output (single or specific
pattern)
● Time
Other variables that can be
configured in Recipe / Filling
mode are:
●
●
●
●
Outputs at start of step
Outputs at end of step
Target action (e.g. print)
PLU to accumulate totals data
All configuration information is
retained when power is off.
Product Look Ups
(PLUs) & Totals
Information Stored per PLU
Sub-totals and grand totals.
Application specific info stored
per PLU.
Memory protection of PLUs.
Maximum capacity of each PLU
999,999,999.
User Definable Text Fields per
PLU
3, each 21 characters.
When a PLU is recalled, the
indicator is automatically
configured into the application
programme of the PLU.
All information on the PLU can be
displayed as well as printed.
Real Time Clock
The E1205 is fitted with a real
time clock which allows the user
to display and print the time and
date. This clock is battery-backed
and will remain functional in the
absence of mains power.
Communications
Serial Interface
Two bi-directional asynchronous
serial interfaces (RS232/485/422
and RS232/20mA current loop) as
standard. Two additional via
optional digital interface card.
Networking
Ethernet 10/100 TCP/IP interface
as standard.
Fieldbus interfaces – optional –
see Kits.
E1205
Avery Weigh-Tronix Technical Specification
Electrical Power Input
Voltage
110 VAC - 230 VAC nominal,
50/60 Hz.
Tolerance
Voltage -15 to +10%.
Frequency ±10%.
Power Consumption
30 VA maximum when used with
full configuration of load cells.
Cable Length
2 m.
Power Supply
Internally fitted
Isolation Protection
None. Mains earth lead must be
connected to safety earth.
Lightning protection external.
Environment
Resistance to Dirt and Moisture
Protected to IP54, in moulded
plastic enclosure.
Electrical Disturbance
Immune to electrical disturbance,
including RFI as detailed in
EN 45501:1992
Operating Temperature
-10° C to + 40° C.
Service Temperature
-10° C to + 55° C.
Storage Temperature
-40° C to +70° C.
Finish
Enclosed in moulded ABS plastic
case.
Mounting Options
The indicator will desk, wall or
pole mount.
Pole mounting requires optional
adapter.
Performance
Internal Resolution
16,777,216.
Repeatability
± 0.01% of full scale.
Span Drift Time
± 50 ppm/year max.
Span Drift Temperature
± 4 ppm/° C typical.
Approvals
All data relating to the
performance of the machine
meets and exceeds requirements
of EN 45501:1992 European
Approval (‘E’ Approval) Accuracy
Class III Machines and
OIML 76-1. The type approval
certificate numbers being:
EU
South Africa
New Zealand
Australia
- UK2694
-
Factory Options
Choice of mains power connector:
UK, Euro, Australian, South
African, American.
Zero Drift Time
± 10 ppm ±0.1% DL/year
maximum.
Zero Drift Temperature
± 2 ppm ± 40 ppm DL/ °C
maximum.
Warm Up Time
Immediate self test complete.
Self Diagnostics
Graphics Display
Keys
PS/2 Keyboard
A2D (x 2)
Serial Test (4)
Network interface
Ethernet port
BCD Out
Analogue Out
Pulse In
Memory
Tally Roll
Internal I/O
External I/O
5
E1205
Avery Weigh-Tronix Technical Specification
Kits
The following kits are available to
enable local configuration when
required.
1. Analogue Card
Provides second analogue scale
input and two analogue outputs
4-20 mA.
E11050F00000000
2. Digital Card
Provides two additional bidirectional asynchronous serial
interfaces (RS232/485/422 and
RS232). Also includes BCD
output (range 1 - 100,000) and
pulse input.
E11050G00000000
8. ModBus TCP Interface Kit
Enables interfacing to ModBus
TCP or Ethernet (over Modbus
TCP) network.
Includes Electronic Tally Roll card
(E11050H00000000) as standard
to provide interface.
E11050N00000000
9. Load Cell Connector With
Internal Loom
When fitted, provides ability to
disconnect load cell inputs from
indicator without opening the unit.
70735-247
Accessories
1. External Lightning Protection
Box
When fitted between the load cell/
junction box, and load cell input,
provides protection from lightning.
E11050B00000000
2. Trips Interface Unit (TIU8)
Provides eight external I/O in
place of three internal I/O
included as standard.
Inputs rated at 12 V, outputs rated
at 240 V 10 A.
Two TIU8s may be connected to
the E1210 to provide a total of
16 I/O.
E11100E00000000
3. Electronic Tally Roll Card
Securely stores and prints up to
72,000 transactions, with details
of scale ID, gross/tare/net
weights, time, date and
consecutive number.
Also acts as carrier for FieldBus
card.
E11050H00000000
3. 300 mm Pole
Stainless steel mounting pole with
top mounting plate for indicator.
E11100U00000000
4. ProfiBus Interface Kit
Enables interfacing to ProfiBus
network. Includes Electronic Tally
Roll card (E11050H00000000) as
standard to provide interface.
E11050J00000000
5. Interface Leads for Platform
to Indicator
See price list.
5. ControlNet Interface Kit
Enables interfacing to ControlNet
network. Includes Electronic Tally
Roll card (E11050H00000000) as
standard to provide interface.
E11050K00000000
6. DeviceNet Interface Kit
Enables interfacing to DeviceNet
network. Includes Electronic Tally
Roll card (E11050H00000000) as
standard to provide interface.
E11050L00000000
7. Ethernet IP Interface Kit
Enables interfacing to Ethernet
Industrial Protocol (IP) network.
Includes Electronic Tally Roll card
(E11050H00000000) as standard
to provide interface.
E11050M00000000
6
4. 1000 mm Pole
Stainless steel mounting pole with
top mounting plate for indicator
E11100V00000000
6. Interface Leads for Indicator
to Printer
See price list.
7. Y808
Large push button unit (up to four
buttons).
E1205
Avery Weigh-Tronix Technical Specification
Weight
Dimensions
2.0 kg
188
292
Shipping Specification
Net
2.0 kg
Gross
4.6 kg
292
330
Measurement
345 mm x 270 mm x 335 mm
Harmonised Commodity Code
842390 00 0.
All dimensions in millimetres
7
E1205
Avery Weigh-Tronix Technical Specification
© Avery Berkel Limited 2004. All rights reserved. This publication is issued to provide outline information only which, unless agreed by Avery Berkel Limited in writing, may not be regarded as a representation relating
to the products or services concerned. Avery Berkel Limited reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service.
Your local distributor:
E mail: info@awtxglobal.com
Internet: http://www.averyweigh-tronix.com
Produced by Avery Weigh-Tronix Publicity Department
8
Foundry Lane, Smethwick,
West Midlands, England B66 2LP.
Tel: +44 (0)870 90 34343 Fax: +44 (0)121-224 8183
E1205/4.04/Issue 1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising