1212389L

 Owner’s Manual
Blu-ray Disc™ Player
Model No. DMP-BD 755
DMP-BD75
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely.
Please keep this manual for future reference.
If you have any questions contact
U.S.A. and Puerto Rico : 1-800-211-PANA(7262)
Canada : 1-800-561-5505
LP] VOT3A92-1
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow
the safety instructions on the unit and the applicable safety instructions
listed below. Keep these operating instructions handy for future reference.
1 Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding-type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11 Only use attachments/accessories specified by the manufacturer.
12 Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
13 Unplug this apparatus during lightning storms or
when unused for long periods of time.
14 Refer all servicing ic qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.
CONAN
CO
Unit
To reduce the risk of fire, electric shock or product damage,
— De not expose this unit to rain, moisture, dripping er splashing.
— Do not place objects filled with liquids, such as vases, on this unit.
— Use only the recommended accessories.
— Do not remove covers.
— De not repair this unit by yourself. Refer servicing to qualified service
personnel.
Unit
— This unit utilizes a laser. Use of controls or adjustments or performance
of procedures other than those specified herein may result in
hazardous radiation exposure.
— Do not place sources of naked flames, such as lighted candles, on this
unit.
Placement
Te reduce the risk of fire, electric shock or product damage,
— De not install or place this unit in a bookcase, built-in cabinet or in
another confined space. Ensure this unit is well ventilated.
— Do not obstruct this unit's ventilation openings with newspapers,
tablecloths, curtains, and similar items.
2 vaQT3A92
CAUTIOÓN : TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
(THE FOLLOWING APPLIES ONLY IN THE U.S.A. в
FCC Note:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed {o provide reascnable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radic frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interrerence to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
e Reorient or relocate the receiving antenna.
e Increase the separation between the equipment and receiver.
# Connectthe equipment into an outlet on a circuit different from that to
which the receiver is connected.
e Consult the dealer or an experienced radio/ TV technician for help.
FCC Caution: To assure continued compliance, follow the attached
installation instructions and use only shielded interface cables when
connecting to peripheral devices.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
\ Telephone No.: 1-800-211-PANA (7262) J
"EN CAS DOUVERTURE.
NE
AT
— WENN ABDECKUNG
Table of contents
Getting started
IMPORTANT SAFETY
INSTRUCTIONS. . .............. 2
Accessories. ................... 4
Unitand mediacare ............. 4
Control reference guide .......... 5
Playable discs/USB devices ....... 6
Connections & Settings
STEP 1: Connecting toa TV ...... 8
STEP 2: Connecting to an amplifier/
receiver ............... 9
STEP 3: Connecting to a broadband
network ............... 9
STEP 4: Connecting to an AC power
source. .............. 10
STEPS: Settings .............. 10
Playback
Inserting or removing media. . . . .. 13
HOME menu.................. 13
Playing video contents .......... 14
Playing still pictures ............ 17
Playingmusic ................. 18
Enjoying Network Service........ 18
Playing back contents on the DLNA
server (DLNA). ................ 19
Linked operations with the TV
(VIERA Link'M “HDAVI ControlM). ..... 20
Settings
Playback menu. ................ 21
Setup MENU ... 22
Troubleshooting guide ........... 26
Messages. .................... 28
Supplemental information ........ 29
Specifications. . ................ 30
Limited Warranty (ONLY FOR U.S.A.
AND PUERTO RICO) ........... 33
Limited Warranty
(Only for CANADA) ............. 34
Referencia rapida en espanol
(Spanish Quick Reference)... ........ 35
Index ................. Back cover
VQTIA92 3
Getting started
Connections & Settings
Playback
Settings
Reference
Accessories
Check the supplied accessories before using this unit.
1 Remote control
(N2QAYBO00575)
2 Batteries for remote control
1 AC power supply cord
(K2CB2CB00022)
1 [BD755 HDMI cable
(K1HY 19YY0012)
For Canada
The enclosed Canadian French label sheet corresponds to the English
display on the frent and back side of the unit.
e Product numbers provided in this Owner's Manual correct as of
December 2010. These may be subject to change.
e Do net use AC power supply card with other equipment.
e |For U.S.A. and Puerto Rico : To order accessories, refer to
“Accessory Purchases (United States and Puerto Rico)” on page 33.
For Canada : To order accessories, call the dealer from whom you
have made your purchase.
Insert so the poles (+ and —) match those in the remote
control.
R6/LR6, AA
(Alkaline or manganese
batteries)
Point it at remote control signal sensor on this unit. (> 5)
Mishandling of batteries can cause electrolyte leakage which can damage
items the fluid contacts and may cause a fire.
e De not mix old and new batteries or different types at the same time.
e De not heat or expose to flame.
e Do not leave the batiery(ies) in a car exposed to direct sunlight for a
long period of time with doors and windows closed.
e De not take apart or short circuit.
e De not attempt to recharge alkaline or manganese batteries.
e De not use batieries If the covering has been peeled off.
Remove batteries if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
CAUTION
e Danger of explosion if batiery is incorrectly replaced. Replace only
with the type recommended by the manufacturer.
e When disposing the batteries, please contact your local authorities
or dealer and ask for the correct method of disposal.
4 vaQT3A92
Unit and media care
E Clean this unit with a soft, dry cloth
e Never use alcohol, paint thinner or benzine to ciean this
unit.
e Before using chemically treated cloth, carefuily read the
instructions that came with the cloth.
HE Clean the lens
® Use the lens cleaner (not supplied) fo clean the unit's lens.
HB Clean discs
Wipe with a damp cloth and then wipe dry.
HE Disc handling precautions
e Handle discs by the edges to avoid inadvertent scraiches
or fingerprints on the disc.
® Do not attach labels or stickers to discs.
® Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
e Do not use the following discs:
— Discs with exposed adhesive from removed stickers or
labels (rented discs efc).
— Discs that are badly warped or cracked.
— Irregularly shaped discs, such as heart shapes.
B To dispose or transfer this unit
The unit may keep the user settings information in the unit. if
you discard this unit either by disposal or transfer, then
follow the procedure to return all the settings to the factory
presets to delete the user settings. (= 26, “To return all
settings to the factory preset.”)
e The operation history may be recorded in the memory of
this unit.
Control reference guide
со
I 12
ous >
1 7 Mi
Nu
Г) «=== ET
| 9 | [ 2 оао
112) 3 oma | 3
PS и N - ~, DISPLAY
3 | 4 | | 5° 6 J [o —14
= (a Га! РР
Ve | 8 N 9 | Lo —{5
г "an NETFLIX
4 CANCEL |) НА AUDIO С = в
Sp ==
SEARCH PLAY 5
6 Же | —SLOW— skip |
кч | (ERPAUSE) | »+H
To | —
В = — о
О = -
10
11
FRA
wd us (© O 1 С) сл + сю
12
13
14
15
16
17
18
19
20
Turn the unit on and off
TV operation buttons
You can operate the Panasonic TV through the unit's
remote control. (Depending on the TV these buttons
may not work.)
[6 TV POWER] : Turn the television on and off
[AV] : Switch the input select
[+ — VOL] : Adjust the volume
Select title numbers, etc./Enter numbers
Cancel
Select audio (= 14)
Basic playback control buttons (= 14)
Show status messages (= 14)
Show the selection screen of network features (= 18)
Show Pop-up menu/Top menu/Direct Navigator (= 14)
Show sub menu (= 15)
These buttons are used when;
e Operating a BD-Video disc that includes Java™
applications (BD-J).
e Operating contents of Network Service. (> 18)
Transmit the remote control signal
Open or close the disc tray (> 13)
CAUTION
Do not place objects in front of the unit. The disc tray
may collide with objects when if is opened, and this may
cause malfunction.
Show Playback menu (= 21)
Switch on/off Secondary Video (Picture-in-picture)
(= 16)
Show NETFLIX screen
Exit the menu screen
Show HOME menu (= 13)
Selection/OK, Frame-by-frame (= 14)
Return to previous screen
1 2
POWER button (POWER (3/1) (= 10)
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a
small amount of power.
Disc fray (= 13)
USB port (= 13)
Display (= 29)
|
56 7 8
Remote control signal sensor
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20° up and down, 30° left and right
Stop (= 14)
Start play (= 14)
Open or close the disc tray (> 13)
Rear panel terminals (= 8-10)
voTsao 5
Playable discs/USB devices
+R/+RW/+R DL
Bhis-rvey ise
Video
e BD-R M KV
DVD-Video Video
DVD-R Video
AVCHD
MKV
MP3
DVD-RDL JPEG
R DL
DVD-RW Video
AVCHD
Music CD Music [CD-DA]
MKV
CD-R Music [CD-DA]
a CD-RW MP3
A JPEG
USB devices MKV
a (up to 2 TB) MP3
Р JPEG
6 vata
EM Discs that cannot be played in this
unit
Any other disc that is not specifically supported or
previously described.
e DVD-RAM
e Super Audio CD
e Photo CD
e DVD-Audio
e WMA discs
e DivX discs
e PAL discs
e HD DVD
oe BD-Video discs recorded at a rate of 50 fields/sec
Ш Region management information
BD-Video
This unit plays BD-Video marked with labels containing the
region code “A”.
Example:
DVD-Video
This unit plays DVD-Video marked with labels containing the
region number “1” or “ALL”.
Exampie:
Ш Finalize
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded
by a recorder, etc. needs to be finalized by the recorder to
play on this unit. Please refer to the recorder’s instructions.
EH BD-Video
e This unit supports high bit rate audio (Dolby Digital Plus,
Doiby TrueHD, DTS-HD High Resolution Audio and
DTS-HD Master Audio) adopted in BD-Video.
— If “Dolby D/Dolby D +/Doiby TrueHD" is set to “PCM”,
the maximum possible number of Dolby sound is 2ch
PCM. (= 23)
E Music CD
e Operation and sound quality of CDs that do not conform to
CD-DA specifications (copy control CDs, etc.) cannot be
guaranteed.
e The digital audio content side of a DualDisc does not meet
the technical specifications of the Compact Disc Digital
Audio (CD-DA) format so playback may not be possible.
E USB device
e This unit does not guarantee connection with all USB
devices.
e This unit does not support USB device charging.
e FAT12, FAT16 and FAT32 file systems are supported.
e This unit supports USB 2.0 High Speed.
e This unit supports an HDD formatted in FAT32. If the HDD
is not recognized the power to the HDD may not be
supplied. Supply power from an external source.
e | may not be possible to play the above media in some cases due to the
type of media, the condition of the recording, the recording method and
how the files were created.
e The producers of the disc can control how discs are played, so you may
not always be able to control play as described in this Owner's Manual.
Read the disc's instructions carefully.
voTsa 7
STEP 1: Connectingtoa TV
® Do not place the unit on amplifiers/receivers or equipment
that may become hot. The heat can damage the unit.
e Before making any connections we suggest you
temporarily disconnect ali the units from AC power.
e Do not connect video signals through a video recorder.
Due to copy guard protection the picture may not be
displayed properly.
® Please use High Speed HDMI Cables that have the HDMI
logo (as shown on the back cover). it is recommended that
you use Panasonic's HDMI cable. When outputting 1080p
signal, please use HDMI cables 5.0 meters (16.4 ft.) or
less.
Recommended part number (High Speed HDMI Cable):
RP-CDHS15 (1.5 m/4.9 ft), RP-CDHS30 (3.0 m/9.8 ft),
RP-CDHS50 (5.0 m/16.4 ft.), etc.
E Via an HDMI AV OUT terminal (High quality)
/ номим \
HDMI cable
(Only supplied with
DMP-BD755)
e Set “HDMI Audio Output” to “On” (> 24).
e The HDMI connection supports VIERA Link “HDAVI
Control” (> 20).
8 VvOQT3A92
+=
Back of the unit
HE Via a VIDEO OUT terminal (Standard quality)
— Audio/Video cable
e Connect terminals of the same color.
STEP 2: Connecting to
an amplifier/receiver
HDMI cable
Multi channel /=
speakers \ HDMI OUT /
|
HDMI cable
(Only supplied with
DMP-BD755)
e Set “HDMI Audio Output” to “On” (> 24).
e Set “Digital Audio Output” depending on the connected
amplifier/receiver (= 23).
e The HDMI connection supports VIERA Link “HDAVI
Control” (> 20).
e When using the TV or ampilifier/receiver that does not
have the indication of “(ARC)” (non-ARC-compatible) on
the HDMI terminal, in order to enjoy TV's sound by
amplifier/receiver it is also required to connect the
amplifier/receiver and TV using an optical digital cable.
STEP 3: Connecting to
a broadband network
The following services can be used when this unit is
connected to broadband.
e Firmware can be updated (> 12)
e You can enjoy BD-Live (> 16)
e You can enjoy Network Service (> 18)
e DLNA feature (> 19)
For details about connection method, refer to the
instructions supplied with the connected equipment.
B LAN cable connection
10BASE-T/T0GBASE TH] .
Connections & Settings
LAN Cable
Broadband router, etc.
LAN Cable -
Modem
(Broadband)
*Provided by ISP
e Use category 5 or above straight LAN cables (STP) when
connecting to peripheral devices.
e Inserting any cable other than a LAN cable in the LAN
terminal can damage the unit.
vatT3Ag2 9
STEP 4: Connecting to
an AC power source
AC power suppiy cord
(supplied)
Toa household AC outlet
e This unit consumes a small amount of AC power (“Quick
Start”: “Off”, approx. 0.1 W) even when turned off. In the
interest of power conservation, if you will not be using this
unit for an extended period of time, it can be disconnected.
Install this unit so that the power cord can be unplugged from the
socket outlet immediately if any problem occurs.
10 vatsas2
STEP о: - Setings:
After connecting your new player for the 1st time and
pressing the power button, a screen for the basic settings
will appear.
Preparation
Turn on the television and select the appropriate video
input on the television.
1 Press [d) POWER].
Setup screen appears.
2 Follow the on-screen instructions and
make the settings with [A, Y] and press
[OK].
After completing “Easy Setting”, you can perform “Network
Easy Setting”.
e You can perform this setup anytime by selecting “Easy Setting” in the
Setup menu. (> 25)
Network Easy Setting (Internet Connection Check)
The configuration of your network is about to begin. Connection to the Internet +. Fall(Error code: 8010) A
Follow the on-screen instructions and make seme coast —
the settings with [A, У, <, >] and press lease refer to the owner's manual for the e cause ; L
[O K]. he a q the solution fort. 2000 Ce
The confirmation of a network connection and the.
Internet functions’ (BD- «Live ete. ). accessibility 1 fs
conducted. Lee . ss
ls a LAN cable ea already connected > : ni
Please refer to the operating instructions for how. o
to.connect to with a LAN cable e 7
A broadband. Internet connection is necessary for. NT Display mota STA Check the following es
BD-Li - Je - LU
Press [OK] 10 to proceed. DT Cannot find the e “Primary DNS” and “Secondary
server. DNS" settings of “IP Address/
(Error code: B019) DNS Settings” (> 24)
e The server may be busy or the
service may have been
suspended. Piease wait a few
moments, and then try again.
e Settings of “Proxy Server
Settings” (> 24) and the router
Failed to connect to
the server.
(Error code: B020)
Connections & Settings
When you experience
problems with settings
J e Refer to the operating instructions of the hub or router.
Network Easy Setting e You can perform this setup anytime by selecting “Network Easy Setting”
(Home Network Connection Check) in the Setup menu. (> 24)
e You can redo these settings individually using “Network Settings”.
(= 24)
Complete.
1. LAN cable connection. Fa A aaa mm
2,17 address setting . ‚Fall. - ATA
3. Connection to gateway * +
LAN cable is not connected,”
Please check the connection,
Select "Yes" and press [OK to check network
connection again, Select “No” and press SON
fo finish Network Easy Setting, -- Te
If you have more than one Panasonic player/recorder and
the remote control operates both products at once, you will
need to change the remote control code on one product to
prevent this occurrence. (= 25, “Remote Control Code™)
Yes
e» [Cate
a BE Eme eos “following e
1. LAN cable connection Fail e Connection of
2. IP address setting Fail the LAN
3. Connection to gateway Fail cables (> 9)
1. LAN cable connection Pass e Connection
2. IP address setting Fail and settings
3. Connection to gateway Fail of the hub
- and router
1. LAN cable connection Pass e Settings of
Pass or “IP Address/
2. IP address setting Home DNS
network Settings”
available (> 24)
3. Connection to gateway Fail
VQOT3A92 11
Occasionally, Panasonic may release updated firmware for
this unit that may add or improve the way a feature
operates. These updates are available free of charge.
This unit is capable of checking the firmware automatically
when connected to the Internet via a broadband connection.
When a new firmware version is available, the following
message is displayed.
77
To update the firmware
Press [HOME] > select “Setup” > select “Player
Settings” > select “Others” > [OK] > select “Firmware
Update” > [OK] > select “Update Now”
DO NOT DISCONNECT the unit from the AC power or
perform any operation while the update takes place.
After the firmware is installed, “FIniSH” will be displayed on
the unif’s display. Unit will restart and the following screen
will be displayed.
eo [f downloading on this unit fails or this unit is not connected to the
Internet, then you can download the latest firmware from the
following website and burn it to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (> 25, “System
Information”)
e Downloading will require several minutes. It may take longer or
may not work properly depending on the connection environment.
e |f vou do not want to check for the latest firmware version, set
“Automatic Update Check” to “Of”. (> 25)
12 VaT3A92
Inserting or removing
media
® When inserting a media item, ensure that it is facing the
right way up.
e |f you connect a Panasonic product with a USB
connection cable, the setup screen may be displayed on
the connected equipment. For details, refer to the
instructions for the connected equipment.
HOME menu
Major functions of this unit can be operated from the HOME
menu.
Preparation
Turn on the television and select the appropriate video input
on the television.
1 Press [5 POWER] to turn on the unit.
2 Press [OK] or [A, Y, <, P] to select the
item.
Connections & Settings
e When a media is inserted, contents selection screen
for that media is displayed.
e if there are any other items, repeat this step.
e To return to HOME menu, select “HOME” or press
[RETURN] several times.
Playback
Play back the contents.
ue © © Disc
Videos/ - (> 14, 17, 18)
o e When multiple contents
Photos/
Music are recorded, select the
| USB types of contents or the
| title.
| CIE ce Internet Displays the home screen of
Network | Content Network Service (> 18)
~~ [DLNAcIient |(> 19)
Sm Ta Player
-1 USB (> 16)
Management
To show the HOME menu
Press [HOME].
e ltems to be displayed may vary with the media.
e Where necessary, set “Mixed Data Disc Option” when using a disc with
both data files (MP3, JPEG, MKV) and Video. (> 22)
VQTsA92 13
Playing video contents
1 Insert the media.
If the menu is displayed, press [A, ¥, «<, >] to select
the item. (> 13)
2 Press [A, V]to select the title and press
[OK].
E To show menus
You can show Top Menu, Direct Navigator or Pop-up Menu.
Press [POP-UP MENU/TOP MENU].
e Press TA, Y, 4, PJ to select the item and press [OK].
E To show the status messages
While playing, press [STATUS].
The status messages give you information about what is
currently being played. Each time you press [STATUS], the
display information may change or will disappear from the
screen.
e.g.BD-Video
T. Title, C: Chapter, PL: Playlist
Elapsed time in the title
Total time
Current position
¢ DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED.
Press [STOP] when you have finished playback to protect the unit's
motor, your television screen and so on.
Depending on media and contents, the display may change or may not
appear.
e MKV : Successive play is not possible.
It is not possible to playback AVCHD and MPEG2 video which have
been dragged and dropped, copied and pasted to the media.
e lo save on electricity, the power is turned off automatically if there is no
button operation for about 30 minutes when not playing back (such as
when paused, displaying the menu, displaying still pictures, etc).
(Compatible with ENERGY STAR)
14 vaTtsas2
These functions may not work depending on the media and
contents.
Press [NSTOP].
The stopped position is memorized.
Resume play function
Press > PLAY] to restart from this position.
e The position is cleared if the tray is opened or you press
[NSTOP] several times to display “StOP” on the unit's
dispiay.
e On BD-Video discs inciuding BD-J, the resume play
function does not work.
Pause
Press [INPAUSE].
e Press [HPAUSE] again or [> PLAY] to restart play.
Search/Slow-motion
Search
While playing, press [SEARCH <<] or
[SEARCH].
e Music and MP3: The speed is fixed to a single step.
Siow-motion
While paused, press [SEARCHDD ].
The speed increases up to 5 steps.
e Press [> PLAY] to revert to normal playback speed.
While playing or paused, press [44] or
[>>].
Skip to the title, chapter or track you want to play.
e Each press increases the number of skips.
Frame-by-frame
While paused, press [>] (11D).
e Press and hold to change in succession forward.
e Press [> PLAY] to revert to normal playback speed.
Changing audio
Press [AUDIO].
You can change the audio channel number or soundtrack
language, etc.
1 Press [SUB MENU].
2 Select an item, then press [OK].
While Direct Navigator screen is displayed
Useful functions im :
View | To play playlists
Playlists SUN pay play -
View Titles | To select the title.
Select. - В To switch to another folder.
Folder NUIT
Top Menu — ВЕ To display Top Menu.
Gi ) LL - To display Pop-up Menu.
Menu NU - To display Menu.
¢ Depending on the media and contents, displayed items are different.
EH Displaying subtitle text
You can display subtitle text on the MKV video disc with this
unit. The operation might be different or it May not operate
properiy depending on the way the file was made or the
state of this unit (playing, stopped, etc.).
Set “Subtitle” in “Disc” (© 21)
e MKV video files that do not display “Text” do not contain subtitle text.
e [f the subtitle text is not displayed correctly, try changing the language
settings. (> 22)
VQT3A92 15
Enjoying BD-Live or - >>
picture-in-picture in BD- Video
Enjoying BD-Live discs with
Internet
BD-Live allows you to enjoy more functions such as
subtitles, exclusive images and online games by connecting
this unit to the Internet. Since most of the BD-Live
compatible discs are played back using the BD-Live
function, additional contents are required to be downloaded
info the external memory (local storage).
e This unit is using a USB device as a local storage device.
BD-Live function cannot be used when there is no USB
device inserted.
1 Perform network connection and
settings. (= 9, 11)
2 Insert a USB memory with 1 GB or more
free space.
3 Insert the disc.
Ш Deleting data on the USB device
If you no longer need data recorded on the USB device, you
can delete data with the following operation.
(1) inserta USB device.
@ Press [HOME].
@ Press [OK] to select “Setup”.
@ Press [>] to select "USB Management”.
© Press [OK].
к Management, No. ofFiles A SR :
gt
Зо AE RETURN
(6) Press [<, >] to select “Yes” and press [OK].
(7) Press [<, >] to select “Start” and press [OK].
16 vaTtsas2
Playing picture-in-picture
To turn on/off secondary video
Press [PIP].
Secondary video
Primary video
To turn on/off secondary audio
[DISPLAY] > select “Disc” = [>] = select
“Signal Type” > [OK] > set “Soundtrack” in
“Secondary Video” to “On” or “Off”
e The usable functions and the operating method may vary with each
disc, please refer to the instructions on the disc and/or visit their
website.
e Some BD-Live content available on the Blu-ray discs may require an
Internet account to be created in order to access the BD-Live content.
Follow the screen display or instruction manual of the disc for
information on acquiring an account.
e “BD-Live Internet Access” may need to be changed for certain discs
(> 22).
¢ When discs supporting BD-Live are played back, the player or disc 1Ds
may be sent to the content provider via the Internet.
e During search/slow-motion er frame-by-frame, only the primary video is
displayed.
e When “BD-Video Secondary Audio” in “Digital Audio Output” is set to
“Off, secondary audio will not be played (>> 23).
Playing still pictures
(BD-RE, DVD-R/-R DL, CD-R/RW, USB device)
1 Insert the media.
ifthe menu is displayed, press [A, V, 4, PJ] to select
the item. (= 13)
2 Press [A, Y, <, P] to select the still
picture and press [OK].
DIRECT NAVIGATOR Photo View," oe
Press <Q, P] to display the previous or next still picture.
To exit the screen
Press [POP-UP MENU/TOP MENU].
E To show the still picture properties
While playing, press [STATUS] twice.
Shooting date
To exit the screen
Press [STATUS].
1 Press [SUB MENU].
2 Select an item, then press [OK].
While Photo View screen is displayed
Select 176 select the stil pictures in another folder.
Ни но You can display still pictures one by one at a
constant interval.
~~ | Display Interval
oo Change the display interval.
CT] Transition Effect
Slide shows Set display method.
Settings | | Réreat Play
CoS Repeat slideshow.
“| Press [A, Y, <P] to select “Set” and
e o o press [OK].
While playing
Rotate Right -
———— | Rotate the still picture.
Rotate Left —
¢ Depending on the condition of the unit and media contents, displayed
items are different.
e When a still picture with large number of pixels is played, the display
interval may become longer. Even if the setting is changed, the display
interval may not become shorter.
vaT3A92 17
Playing music
(DVD-R/-R DL, music CD, CD-R/RW, USB device)
1 Insert the media.
If the menu is displayed, press [A, ¥, «<, >] to select
the item. (> 13)
2 Press [A, V]to select the track and press
[OK].
AMOO rune
th e r i : : = : : = : : = : : = - -
1 While the Direct Navigator screen is displayed
Press [SUB MENU].
2 Press [A, V]to select “Select Folder”
and press [OK].
e You cannot select folders that contain no compatible tracks.
18 vaT3A92
Enjoying Network Service
You can enjoy Network Service such as streaming movie,
etc. (Current as of December 2010)
Preparation
e Network connection (> 9)
e Network setting (> 11)
1 Press [NETWORK].
e NETFLIX can be accessed directly by pressing
[NETFLIX] button.
2 Press [P ] to select “Internet Content”.
e Message is displayed. Please read these instructions
carefully and then press [OK].
3 Press [A, Y, <, P] to select the item and
press [OK].
Operable buttons:
A, V, «4 Pp] [OK], [RETURN], colored butions,
number buttons
The home screen;
Images are for illustration purposes, contents may
change without notice.
To exit from Network Service
Press [EXIT] or [HOME].
e \Vhen playing content from a disc and/or USB device Network Service
cannot be accessed by pressing [NETWORK]
Set “Lock” in “Internet Content Settings”, when restricting the use of
Network Service (= 24)
If using slow Internet connection, the video may not be displayed
correctly. A high-speed Internet service with a speed of at least 6 Mbps
is recommended.
Be sure to update the firmware when a firmware update notice is
displayed on the screen. If the firmware is not updated, you will not be
able to use Network Service function. (> 12)
Network Service home screen is subject to change without notice.
The services through Network Service are operated by their respective
service providers, and service may be discontinued either temporarily or
permanently without notice. Therefore, Panasonic will make no warranty
for the content or the continuity of the services.
All features of websites or content of the service may not be available.
Some content may be inappropriate for some viewers.
Some content may only be available for specific countries and may be
presented in specific languages.
Playing back contents on Foi fem tome eters ie wenurmor eww,
the DLNA server (DLNA) =
e Menu structure will be different depending on the equipment connected
. a . 1 Le . to this unit. Select the contents by repeating the operation.
You can enjoy viewing video, still pictures and music saved Depending on the contents and the connected equipment, playback
on a DLNA Certified media server connected to the home may not be possible.
network with this unit. ltems displayed in gray on the display cannot be played back by this
: : : ; unit.
— This feature is only supported by Windows 7 Operating This unit cannot be played back via connected equipment.
system. ¢ Depending on the performance of the connected PC, video frames may
be dropped during playback, or video may not playback at all.
Preparation
(1) Perform network connection and network settings of this
unit. (= 9, 11)
@ Perform Home Network settings of the PC.
e Add the contents and foider to the Windows Media Player
library.
— Playlist of Windows Media® Player can play back only
the contents that are stored in the libraries.
For details about the setting and operation method of
connected equipment, refer to the following Website and
the operating instructions for each item of equipment.
http://panasonic.jp/support/giobal/cs/
(This site is in English only.)
1 Press [NETWORK].
2 Press [A] to select “DLNA Client”.
e A list of equipment connected via the network is
displayed.
e This list can be updated by pressing [R] on the remote
control.
e.g.
3 Press [A, V]to select the equipment to
playback the contents, and press [OK].
4 Press [A, Y, <, P] to select the item to
playback (folder), and press [OK].
e You may be able to use convenient functions
depending on the disc or content by pressing
[SUB MENU] or [DISPLAY].
e Control Panel is displayed once Control Panel
the playback starts.
e.g.
Operation can be performed 9
with [A, Y, <, >], [OK] and
[EXIT]. $
e Press [OK] if the Controi Panel
is not displayed.
e Press [RETURN] to hide the Controi Panel.
vaTsAS2 19
Linked operations with
the TV (VIERA Link™ “HDAVI Control™")
VIERA Link™ is a new name for EZ Sync™,
VIERA Link “HDAVI Control” is a convenient function
that offers linked operations of this unit, and a
Panasonic TV (VIERA) or amplifier/receiver under
“HDAVI Control”.
You can use this function by connecting the
equipment with an HDMI cable. See the operating
instructions for connected equipment for operational
details.
\. ”
Preparation
(1) Set “VIERA Link” to “On” (= 24). (The default setting is
“On”.)
@ Set the “HDAVI Control” operations on the connected
equipment (e.g., TV).
@ Turn on ali “HDAVI Control” compatible equipment and
select this unit's input channei on the connected TV so
that the “HDAVI Control” function works properiy.
Aiso when the connection or settings are changed,
repeat this procedure.
Automatic input switching Se
Power on link PS
When play starts on the unit, the TV will automatically switch
the input channel and display the corresponding action.
Additionally when the TV is off, the TV will automatically turn
on.
Power off lin k лы SD
All connected equipment compatible with “HDAVI Control”,
including this unit, automatically turns off when you switch
the television off.
e This unit supports “HDAVI Control 17 function.
This standard is compatible with Panasonics conventional HDAVI
equipment.
e VIERA Link HDAVI Control”, based on the control functions provided by
HDMI which is an industry standard known as HDMI CEC (Consumer
Electronics Control), is a unique function that we have developed and
added. As such, its operation with other manufacturers’ equipment that
supports HDMI CEC cannot be guaranteed.
e Please refer to individual manuals for other manufacturers’ equipment
supporting VIERA Link function.
20 vatsas2
Playback menu
1 Press [DISPLAY].
e.g., BD-Video
Subtitle —
Subtitle Style
Menus items Settings
2 Press [A, V]to select the menu and
press [>].
3 Press [A, Y, <, P] to select the item and
press [>].
4 Press [A, V]to select the setting.
Some items can be changed by pressing [OK].
To exit the screen
Press [DISPLAY].
Audio channel
Select the audio channel number.
(= 14, “Changing audio”)
Angle
Select the number of the angle.
e Some items may be changed only on the disc specific menu. (= 14)
Repeat Play
(Oniy when the elapsed time is being displayed on the unit's
dispiay.)
Select the item which you want to repeat. The items
displayed differ depending on the type of media.
Select “Off” to cancel.
Random
Select whether or not to play random.
Depending on the condition of the unit (playing,
stopped, etc.) and media contents, there may be some
items that you cannot select or change.
Regarding Language : (= 29)
Picture
Select the picture quality mode during play.
e if you select “User”, you can make further adjustments.
Press [>] to select “Picture Adjustment” and press [OK].
Playback
Signal Type
The recording method of
ce Video e |
original video appears.
Primary >
Select the type of audio or
| Soundtrack
Select on/off of images. The
recording method of original
video appears.
0) Video
Secondary.
Progressive
Select the method of conversion for progressive output to
suit the type of material being played.
e When the content is distorted change the settings from
“Auto” to “Video”.
Select on/off of audio and the
language.
> Soundtrack
Video
The recording method of original video appears.
Soundtrack
Show or change the soundtrack.
Subtitle
Turn the subtitle on/off, and change the language depending
on the media.
Subtitle Style
Select the subtitle style.
Settings
VQT3A92 21
Setup menu
Change the unit's settings if necessary. The settings remain
intact even if you switch the unit to standby.
1 Press [HOME].
2 Press [OK] to select “Setup”.
3 Press [€] to select “Player Settings”.
TV / Device Connection — “4014, 6 LE
Network. TNA
4 Press [A, V] to select the menu and
press [OK].
5 Press [A, V]to select the item and press
[OK].
If there are any other items, repeat these steps.
6 Press [A, Y, <, P] to select the option
and press [OK].
e There may be differences in operation methods. If this happens, follow
the on-screen instructions for the operation.
About the password
The following items use the same password.
Don’t forget your password.
e ‘DVD-Video Ratings”
e “BD-Video Ratings”
e “Lock” (> 24)
22 vaTIAS
DVD-Video Ratings
Set a ratings level to limit DVD-Video play.
e Follow the on-screen instructions. Enter a 4-digit
password with the number buttons when the password
screen is shown.
BD-Video Ratings
Set an age limit of BD-Video play.
e Follow the on-screen instructions. Enter a 4-digit
password with the number buttons when the password
screen is shown.
Audio Language
Choose the language for audio.
e |f “Original” is selected, the original language of each disc
will be selected.
e Enter a code (> 29) with the number buttons when you
be E de n
select “Other + >",
Subtitle Language
Choose the language for the subtitle.
e |f “Automatic” is selected and the language selected for
“Audio Language” is not available, subtitles of that
language will automatically appear if available on that
disc.
e Enter a code (> 29) with the number buttons when you
seiect “Other >>>",
Menu Language
Choose the language for the disc menus.
e Enter a code (> 29) with the number buttons when you
mie due М
select “Other <<<".
BD-Live Internet Access (= 16)
You can restrict Internet access when BD-Live functions are
used.
e |f “Allow (Limited) is selected, Internet access is permitted
only for BD-Live contents which have content owner
certificates.
Mixed Data Disc Option
Select the playback contents on discs with both data files
and Video.
e if “MP3/JPEG/MKV" is selected, the video menu function
is unavailable.
e |[f “BDAV/AVCHD' is selected, data file cannot be played
back.
Subtitle Text
Select a suitable item according to the language used for
MKV subtitles text.
e This item is displayed only after playing back a file.
e BDAY is one of the video formats that are recorded on a BD-RE/BD-R.
(= 6)
Black Level Control
Select lighter or darker for adjusting the black level control to
the desired setting for picture enhancement.
Dynamic Range Compression
You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
e “Auto” is effective only when playing Dolby TrueHD.
Digital Audio Output
Press [OK] to show the following settings:
Dolby D/Dolby D +/Dolby TrueHD
DTS/DTS-HD
Select the audio signal to output.
e Select PCM”, when the connected equipment cannot
decode the respective audio format. This unit decodes
the audio format and transmits to the connected
equipment.
e Not making the proper settings may result in noise.
BD-Video Secondary Audio
Select whether to mix or not mix the primary audio and
secondary audio (including the button click sound). (> 16)
e |f “Off is selected, the unit outputs the primary audio
only.
Downmix
Select the downmix system of multi-channel to 2-channel
sound.
e Select “Surround encoded”, when the connected
equipment supports the virtual surround function.
e There is no effect on “Bitstream” via HDMI AV OUT,
e The audio will be output in “Stereo” in the following cases:
— AVCHD playback
— Playback of secondary audio (including the button click
sound).
Status Messages
Choose whether to show status messages automatically.
On-screen Language
Choose the language for menus and on-screen messages.
Screen Saver Function
This is to prevent burn-in on the screen.
e When this is set to “On”:
If there is no operation for 10 minutes or more, Direct
Navigator screen switches to HOME menu automaticaliy.
e While playing and pausing, etc., this function is not
available.
e As for Music [CD-DA] or MP3, regardiess of the setting, if
there is no operation for a while, Direct Navigator screen
switches to the other states automatically.
Front Panel Display
Changes the brightness of the unit's dispiay.
e If “Auto” is selected the display is dimmed during playback
and bright not during playback.
License
Information about the software used by this unit is displayed.
TV Aspect
Set to match the type of television connected.
When connected to a 4:3 aspect television and playing 16:9
ratio image:
De o 5 The sides are cut off so
apart > the picture fills the screen.
ana, When playing BD-Video,
Scan AN .
| Video is output as "4:3
STONE TNT Letterbox”.
= - Л Black bands appear at the
4:3 ее top and bottom of the
picture.
Settings
When connected to a 16:9 widescreen television and
playing 4:3 ratio image:
1n.a | Video is displayed as a 4:3 ratio image in the
DIAS center of the screen.
aE Video is displayed as a horizontally
16:9 Full 1 stretched 16:9 image.
VQTIA92 23
HDMI Connection
Press [OK] to show the following settings:
HDMI Resolution
The items supported by the connected devices are
Network Easy Setting (> 11)
indicated on the screen as “><”. When any item without “”
is selected, the images may be distorted.
e if ‘Auto’ is selected, automatically selects the output
Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings:
resolution best suited to the connected television.
® To enjoy high-definition video up-converted to 1080p,
you heed to connect the unit directly to 1080p
compatible HDTV (High Definition Television). If this unit
is connected to an HDTV through other equipment, it
must also be 1080p compatible.
24p Output
When this unit is connected to a TV supporting 1080/24p
output using an HDMI cable, movies and other material
recorded at 24p are output at 24p.
e When BD-Video images other than 24p are played,
images are output at 60p.
® 24p
A progressive image recorded at a rate of 24 frames per
second (motion-picture film). Many BD-Video movie
contents are recorded in 24 frames/second in
accordance with the film materials.
HDMI Audio Output
This setting selects whether or not to output audio from
HDMI.
VIERA Link
Set to use “HDAVI Control” function when connected with
an HDMI cable to a device that supports “HDAVI Control”.
e Select “Off when you do not want to use “HDAVI
Control”.
IP Address/DNS Settings
This is for checking the state of the network connection
and setting the IP address and DNS-related.
Press [OK] to show the respective setting.
e “Connection Speed Setting” is enabled only when “Auto
Detect Connection Speed” is turned “Off”.
Proxy Server Settings
This is for checking the state of connection with the Proxy
server and performing settings.
Press [OK] to show the respective setting.
Internet Content Settings (> 18)
(Network Service)
Press [OK] to show the following settings:
Lock
You can restrict the usage of Network Service.
e Foliow the on-screen instructions. Enter a 4-digit
password with the number buttons when the password
screen is shown.
MAC Address
Displays the MAC address of this unit.
Deep Color Output
This setting is for selecting whether to use Deep Color
output when a television that supports Deep Color is
connected.
Contents Type Flag
Depending on the playback content, the TV will output
adjusting to the optimal method when a TV that supports
this function is connected.
24 VaT3A92
Remote Control Code
Change the remote control code if other Panasonic products
react to this remote control.
Quick Start
Speed of startup from power off is increased.
e internal control unit will be powered when it is set to “On”
so compared to when the setting is “Off” the following will
oceur.
— Idle power consumption will increase. (about the power
consumption = 30)
Easy Setting
You can execute basic settings ("On-screen Language”, “TV
Aspect”, “Quick Start”)
Restore Default Settings
This returns all values in the Setup menu and the Playback
menu, except for “Remote Control Code”, “On-screen
Language”, “IP Address/DNS Settings”, “Proxy Server
Settings”, “Lock”, “DVD-Video Ratings” and “BD-Video
Ratings” etc. to the default settings.
System Information
Display firmware version of this unit.
Firmware Update (> 12)
Press [OK] to show the following settings:
Automatic Update Check
When this equipment remains connected to the Internet, it
will check for the latest firmware version when it is turned
on and you can update it if necessary.
Update Now
You can update the firmware manually if a firmware
update is available.
VQT3A92 25
Settings
Troubleshooting guide
Before requesting service, please perform
the following steps.
Do you have the latest firmware installed?
Firmware. updates may be released to correct operating -
Iregularites. that are * discovered with certain movies.
(= 12): | =
website for more information. o
For USA : В
WWW. panasonic. comhelp.
Enter the. medel number.
For Canada: oe
http: www. y panasonic. ca o А
or visit c our r website to find a service
center.
website.
Make the e following checks and y visit € our
You can find a service center n near ryou 1 ensiy o on our Bo
The following do not indicate a problem with this unit:
— Regular disc rotating sounds.
— Image disturbance during search.
Ш Unit doesn’t respond to remote
control or front panel buttons.
Disconnect the power cord, wait 1 minute, then reconnect
the power cord.
EM Cannot eject disc.
The unit may have a problem.
(1) While the unit is on, press and hold [OK], [B] and [Y] on
the remote control at the same time for more than
5 seconds.
— “00 rEt" is displayed on the unif’s display.
© Repeatedly press [>] (right) on the remote control or
[POWER &)/1] on the unit until “06 FtO” is displayed on
the unit's display.
© Press [OK] on the remote control or [4
on the unit.
OPEN/CLOSE]
26 vaTaA92
General operation nn |
To return to the factory preset.
> Select “Yes” in “Restore Default Settings” in the Setup
menu. (> 25)
To return all settings to the factory preset.
> Reset the unit as follows:
(1) While the unit is on, press and hold [ОК], [В] and [Y] on
the remote control at the same time for more than
5 seconds.
— “00 rEf" is displayed on the unit's display.
© Repeatedly press [B] (right) on the remote control or
[POWER (/1] on the unit until “08 Fin” is displayed on
the unit's display.
© Press and hold [OK] on the remote control or [A
CLOSE] on the unit for at least 4 seconds.
OPEN/
The remote control doesn’t work properly.
> Change the batteries for the remote control. (= 4)
> The remote control and main unit are using different
codes. If “SE LI" is displayed on the units display when
a button is pressed on the remote control, change the
code on the remote control. (= 25)
The TV tuner mode is not displayed when
the TV is switched on.
> This phenomenon may occur, depending on the TV
setting, when “Quick Start” is set to “On”.
— Depending on the TV, this phenomenon may be prevented
by reconnecting the HDMI cable to a different HDMI input
terminal or by changing the HDMI auto connection setting.
You have forgotten your ratings password.
You want to cancel the ratings level.
> The ratings level returns to the factory preset.
(1) While the unit is on, press and hold [ОК], [В] and [Y] on
the remote control at the same time for more than
5 seconds.
— “00 rEf" is displayed on the unit's display.
© Repeatedly press [>] (right) on the remote control ог
[POWER (/1] on the unit until “03 VL” is displayed on
the unit's display.
© Press [OK] on the remote control or [A
on the unit.
OPEN/CLOSE]
This unit does not recognize the USB
connection correctly.
> If inserted during playback the USB device may not be
recognized by this unit.
> Disconnect and reconnect the USB cable. If if still does
hot recognize the connection, turn the power of this unit
off and on again.
> USB devices connected using a USB hub may not be
recognized by this unit.
> If you connect USB HDD to this unit, use USB extension
cable that is supplied with the HDD.
The images from this unit do not appear on
the television.
Picture is distorted.
> An incorrect resolution is selected in “HDMI Resolution”.
Reset the setting as follows:
(1) While the unit is on, press and hold [OK], [В] апа [У] оп
the remote control at the same time for more than
5 seconds.
— “00 ret" is displayed on the unif’s display.
@ Repeatedly press [B] (right) on the remote control or
[POWER (/1] on the unit until “04 PrG” is displayed on
the unit's display.
(3) Press and hold TOK] on the remote control or [4 OPEN/
CLOSE] on the unit for at least 4 seconds.
Set the item again. (= 24)
— When Dolby Digital Plus, Dolby TrueHD, and DTS-HD
audio are not oufput in bitstream, select “Yes” in “Restore
Default Settings” and make proper settings. (> 25)
Video is not output in high-definition.
> Confirm that “HDMI Resolution” in the Setup menu is set
properiy. (> 24)
No subtitles.
> When progressive output is on, closed captions/subtities
cannot be displayed.
The subtitles overlap closed captions
recorded on discs.
> Turn off the subtities or turn off the closed caption
setting on the TV. (> 21)
A black band is displayed around the edge
of the screen.
The aspect ratio of the screen is abnormal.
> Confirm the “TV Aspect” is set properly. (= 23)
> Adjust the aspect setting on the television.
Cannot hear the desired audio type.
= Check the connections and the “Digital Audio Output”
settings. (= 9, 23)
> To output audio from a device connected with an HDMI
cable, set “HDMI Audio Output” to “On” in the Setup
menu. (> 24)
Disc cannot be played.
> The discis dirty. (> 4)
Still pictures (JPEG) do not play back
normally.
> The images that were edited on the PC, such as
Progressive JPEG, etc., may not play back.
| can’t play back BD-Live.
> Confirm that this unit is connected to the broadband
Internet. (= 9)
> Confirm the “BD-Live Internet Access” settings. (= 22)
> Confirm a USB device is inserted into the USB port.
(= 13)
Network |
| can’t connect to the network.
> Confirm the network connection and settings.
(> 9, 11, 24)
> Check the operating instructions for each device and
connect accordingly.
VQT3A92 27
Messages
The following messages or service numbers appear on the
television or unit's display when something unusual is
detected during startup and use.
Cannot play.
> You inserted an incompatible disc (Discs recorded in
PAL video, etc.).
Cannot display on this unit.
> Youtried to play a non-compatible image.
No disc is inserted.
> The disc may be upside down.
OQ This operation is not available.
> Some operations are unsupported by the unit. For
example;
— BD-Video: During playback, reverse slow-motion or
reverse frame-by-frame is not possible.
IP address is not set.
> The “IP Address” in “IP Address/DNS Settings” is “---.
---, ---, ---", Set the “IP Address”, “Subnet Mask”, and
“Default Gateway”. (Select the automatic address
acquisition if necessary.)
Onthe units display __——
SEt
(“ (1” stands for a number.)
> The remote control and main unit are using different
codes. Change the code on the remote control.
Press and hold [OK] and the О
indicated number button at the .
same time for more than 5
seconds.
PRE
Hi or FUL
(“ LU” stands for a number.)
> There is something unusual.
> Check the unit using the troubleshooting guide. if the
service number does not disappear, do the following.
(1) Disconnect the plug from the AC outlet, wait a few
seconds, then reconnect it.
@ Press [POWER (/i] to turn the power on.
If the service number does not disappear despite doing the
above, request service from the dealer. Inform the dealer of
the service number when requesting service.
28 vaTaA92
Supplemental information
E Display languages list
FRA
DEU
ITA
ESP 7
NLD —
SVE
NOR
DAN
POR
English +.”
French
German
Italian
‘Spanish Me
Swedish -
Norwegian
Portuguese
RUS Russian
MAL Malay
Thai
—. Czech
Slovak
FIN RUES Finnish
Ш Language code list
‘ Abkhazian:
Afar:
Albanian:
Amharic:
Arabic:
Armenian:
Assamese:
Azerbaijani:
Basque:
Bhutani:
Breton:
Bulgarian:
Burmese:
Cambodian:
Chinese:
Corsican:
Croatian:
Danish:
English:
Esperanto:
Estonian:
Faroese:
Fiji:
Finnish: +0
French:
Galician:
Georgian:
German:
Greek: FT _ | wo
Greenlandic:
Guarani:
Afrikaans:
Bengali; Bangla: =.
ce 6878
6590
6685
6985
6890
6672
6682
6671
7789
Byelorussian: 6669
7577
Catalan: ~~ 6765
9072
6779
71282
“6783
6865
7876
6978
8070”
6984
7079
7074
7073
7089
7176
6869
6976
7576
© Gujarati: -
Hausa:
Hindi:
— Hungarian:
Icelandic:
Indonesian:
Interlingua:
“drish: 00
ltalian:
Japanese:
Javanese:
- Kannada: -
Kashmiri:
Kirghiz:
Korean:
Kurdish:
Laotian...
Latin:
Latvian, Lettish:
Lingala:
Macedonian:
Malagasy: ДИ
Malay:
Malayalam: 00
Maltese:
Maori. 7
Marathi:
Moldavian: —
Mongolian:
Nepali:
Norwegian:
Oriya:
Pashto, Pushto:
Persian:
Portuguese:
Punjabi:
Quechua:
“7185
“Mietnamese
В Polish TE
Hungarian
7265
7273
7285
7383
7378
7365
7384
7465 -
7487
7578"
7583
7575
7589
7579
7585
„7679
7665
7686
7678
Lithuanian: 7684
7775
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8083
7065
8076"
8084
8065
8185
Arabic
: Hindi |
—- Persian ”
Indonesian
ee - Maori e
Bulgarian
Romanian
Greek
Turkish
Ж Others
asio-
Rh Romance:
8279
8985
8377
8365
7168
8372
8378
8368
8373
8375
8376
8379
6983
8385
Romanian:
Samoan:
Seots Gaelic:
Serbian: —
Serbo-Croatian:
Shona: 700
Sindhi:
Singhalese: 7
Slovak: В
Slovenian: 77
Somali: _
Spanish:
Sundanese: |
Swahili: TET 8387
Swedish: 8386
Тада0с: “8476
Tajik: 8471
Tamil: "8485
Tatar: — 8484
Thai: 8472
Tibetan: —.—.- 6679
Tigrinya: — 8473
Turkish: 8482
Turkmen: 78475
Twi: —. 8487
Ukrainian: 8575
Urdu: 8582
— 8590
Vietnamese: 86/3
Volapük: 8679
Welsh: 6789
Wolof 8779
Xhosa: — 8872
Yiddish: NN 7473
8979
E Units display list
This list only contains displays that are difficult to read.
BYE OPEN
a
Lh а о
READ PLAY
STOP SETUP
NET -99
No PLAY No UPDATE
SET US START
UPDOI-5* FINISH
P-LIST
SLIDE REPEAT
No DISC No PLAY
No READ UNLOCK
BD-J DISC
UNSUPPORT
““[]” stands for a number.
VaT3A92 29
Reference
Specifications
Signal system: NTSC
Operating temperature range:
+5 °C to +35 °C (+41 °F to +95 °F)
Operating humidity range:
10 % to 80 % RH (no condensation)
1.0 Vp-p (75 Q)/Pin jack:1 system
2 Vrms (1 kHz, 0 dB)/Pin jack
Number of connectors : 2 channel: 1 system
HDMI AV output: Type A (19 pin) : 1 system
This unit supports “HDAVI Control 1” function.
USB2.0: 1 system
10BASE-T/100BASE-TX : 1 system
Video output:
Audio output:
USB siot:
Ethernet:
LASER Specification
Class I LASER Product:
Wave length: 790 nm (CDs)/655 nm (DVDs)/405 nm (BDs)
Laser power:No hazardous radiation is emitted with the
safety protection
Power supply: AC 120 Y, 60 Hz
Power consumption: Approx. 12 W
Power consumption in standby mode: Approx. 0.1 W
Power consumption in quick start standby mode:
Approx. 3.3 W
Dimensions (WXDXH) Inciuding the projecting parts:
430 mm X 185 mm X 35 mm
(Approx. 16 15/16"X7 5/16"x1 7/16")
Mass (Weight): Approx. 1.6 kg (3.52 lbs)
ID3 tags (Only titles and
the names of artists)
“MP3, “mp3”
e MOTION JPEG and
Progressive JPEG is not
= A supported
ED e You may not be able to
“JPEG |“.JPG’, “jpg” play back the file if you
E have edited the folder
structure or the file
name on a PC or other
device.
Specifications are subject to change without notice.
30 vaT3A92
e The video file and
subtitles text file are
inside the same foider,
and the file names are
the same except for the
| subtitles text
mew С) file ~~ file extensions.
A “SRT, si a e Some MKV file may not
| SSA, ssa, be played back,
A] ASS”, “ass
depending on the video
resolution and frame
rate condition.
e With certain recording states and folder structures, the
play order may differ or playback may not be possible.
The audio output differs depending on the settings on the
unit. (= 23, Digital Audio Output)
e The number of channels listed is the maximum possible
number of output channels when connected to amplifier/
receiver compatible with the respective audio format.
BD-Video :
HDMI AV. Outputs using original | 7.1ch PCM"
DVD-Video :
5.1ch PCM
“1 When “BD-Video Secondary Audio” is set to “On”, the audio is output as
Dolby Digital, DTS Digital Surround or 5.1ch PCM.
2 The maximum possible number of Dolby sound is 2ch PCM.
This product incorporates the following software:
(1) the software developed independently by or for Panasonic
Corporation,
(2) the software owned by third party and licensed to Panasonic
Corporation,
(3) the software licensed under the GNU General Public License,
Version 2 (GPL v2),
(4) the software licensed under the GNU LESSER General Public
License, Version 2.1 (LGPL v2.1) and/or,
(5) open sourced software licensed under its applicable license terms
including but not limited to
ICU License, c-arse license, gSOAP Public License 1.3b,
(6) Windows Media digital right management technology (WM-DRM)
licensed by Microsoft Corporation or its affiliates.
For the software categorized as (3) and (4), please refer to the terms
and conditions of GPL v2 and LGPL v2.1, as the case may be at
http://www. gnu.org/licenses/old-licenses/gpl-2.0.himl and
hitp/\www.gnu.ord/licenses/old-licenses/lgpl-2.1.htmil.
In addition, the software categorized as (3) and (4) are copyrighted by
several individuals. Please refer to the copyright notice of those
individuals at
http/\www.am-linux.jp/d/AWBP11
The GPL/LGPL software is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY, without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Al least three (3) years from delivery of products, Panasonic will give to
any third party who contacts us at the contact information provided
below, for a charge no more than our cost of physically performing
source code distribution, a complete machine-readable copy of the
corresponding source code covered under GPL v2/LGPL v2.1.
Contact Information
cdrequest@am-linux jp
Source code is also freely available to you and any other member of
the public via our website below.
http://www. am-linux.jp/dI/AWBP 11
For Open Source Software Programs categorized as (5), please refer
to the applicable license terms listed below and/or included in the
“License” menu on Product.
Further, for WM-DRM categorized as (6), please be aware of the
following.
(a) This product is protected by certain intellectual property rights of
Microsoft.
Use or distribution of this technology outside of this product is
prohibited without a license from Microsoft or an authorized Microsoft
subsidiary.
(b) Content providers are using the digital rights management
technology for Windows Media contained in this device ("WM-DRM") to
protect the integrity of their content (Secure Content”) so that their
intellectual property, including copyright, in such content is not
misappropriated. This device uses WM-DRM software to play Secure
Content ("WM-DRM Software”). If the security of the WM-DRM
Software in this device has been compromised, owners of Secure
Content (“Secure Content Owners”) may request that Microsoft revoke
the WM-DRM Software's right to acquire new licenses to copy, display
and/or play Secure Content.
Revocation does not alter the WM-DRM Software's ability to play
unprotected content. A list of revoked WM-DRM Software is sent to
your device whenever you download a license for Secure Content from
the Internet or from a PC. Microsoft may, in conjunction with such
license, also download revocation lists onto your device on behalf of
Secure Content Owners.
¡CU License - ICU 1.8.1 and later
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1995-2010 International Business Machines Corporation
and others
All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the
“Software”, to deal in the Software without restriction, including without
limitation the rights to use, copy, modify, merge, publish, distribute,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, provided that the above copyright
notice(s) and this permission notice appear in all copies of the
Software and that both the above copyright notice(s} and this
permission notice appear in supporting documentation.
THE SOFTWARE 15 PROVIDED “AS IS”, WITHOUT WARRANTY OF
ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FORA
PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD
PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER
OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY
CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL
DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FRCM
LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
ARISING OUT OF OR IN CONNECTION WITH THE USE OR
PERFORMANCE OF THIS SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall
not be used in advertising or otherwise to promote the sale, use or
other dealings in this Software without prior written authorization of the
copyright holder.
All trademarks and registered trademarks mentioned herein are the
property of their respective owners.
c-arse license
Copyright 1998 by the Massachusetts Institute of Technology.
Permission to use, copy, modify, and distribute this software and its
documentation for any purpose and without fee is hereby granted,
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation, and that the name of M.I.T. not be used in
advertising or publicity pertaining to distribution of the software without
specific, written prior permission.
M.1.T. makes no representations about the suitability of this software
for any purpose. It is provided “as is” without express or implied
warranty.
SOAP Public License Version 1.3b
Part of the software embedded in this product is gSOAP software.
Portions created by gSOAP are Copyright (C) 2001-2009 Robert A.
van Engelen, Genivia inc. All Rights Reserved.
THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY
GENIVIA INC AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGE.
VQT3A92 31
Reference
Java and all Java-based trademarks and logos are trademarks or
registered trademarks of Sun Microsystems, Inc. in the United States
and other countries.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #s: 5,451,942;
5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195;
7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents
issued & pending.
DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD
Master Audio | Essential and the DTS logos are trademarks of DTS, Inc.
Product includes software.
© DTS, Inc. All Rights Reserved.
This item incorporates copy protection technology that is protected by
U.S. patents and other intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are prohibited.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
This product is licensed under the AVC patent portfolio license and
VC-1 patent portfolio license for the personal and non-commercial use
of a consumer to (1) encode video in compliance with the AVC Standard
and VC-1 Standard (AVC/VC-1 Video”) and/or (il) decode AVC/VC-1
Video that was encoded by a consumer engaged in a personal and
non-commercial activity and/or was obtained from a video provider
licensed to provide AVC/VC-1 Video. No license is granted or shall be
implied for any other use. Additional information may be obtained from
MPEG LA, LLC.
See hitp//iwww.mpegla.com.
HDAYVI Control™ is a trademark of Panasonic Corporation.
VIERA Link™ is a trademark of Panasonic Corporation.
EZ Sync™ is a trademark of Panasonic Corporation.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS
and Thomson.
“AVCHD” and the “AVCHD” logo are trademarks of Panasonic
Corporation and Sony Corporation.
“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.
DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service
marks, or certification marks of the Digital Living Network Alliance.
Windows is a trademark or a registered trademark of Microsoft
Corporation in the United States and other countries.
32 vVaTIAS
Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO)
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Blu-ray and DVD Products Limited Warranty
Limited Warranty Coverage (For USA and Puerto Rico Only)
If your product does not work properly because of a defect in materials
or workmanship, Panasonic Consumer Electronics Company (referred
to as ‘the warrantor”) will, for the length of the period indicated on the
chart below, which starts with the date of original purchase (“warranty
period”), at its option either (a) repair your product with new or
refurbished parts, (b) replace it with a new or a refurbished equivalent
value product, or (c) refund your purchase price. The decision to
repair, replace or refund will be made by the warrantor.
Product or Part Name Parts Labor
Blu-ray Disc Player, Portable 1 year 90 days
Blu-ray Disc Player
Blu-ray Home Theater System 1 year 1 year
DVD Player, Portable DVD Player | 1 year 90 days
DVD Recorder 1 year 90 days
Rechargeable Batteries (pack), 10 days Not
DVD-RAM Disc (defective exchange) Applicable
During the “Labor” warranty period there will be no charge for labor.
During the “Parts” warranty period, there will be no charge for parts.
This Limited Warranty excludes both parts and labor for
non-rechargeable batteries, antennas, and cosmetic parts (cabinet).
This warranty only applies to products purchased and serviced in the
United States or Puerto Rico. This warranty is extended only to the
original purchaser of a new product which was not sold “as is”.
Mail-In Service
For assistance in the U.S.A. and Puerto Rico in obtaining repairs,
please ship the product prepaid to:
Panasonic Exchange Center
4900 George McVay Drive
Suite B
McAllen, TX 78503
[email protected]
When shipping the unit, carefully pack, include all accessories, and
send it prepaid, adequately insured and preferably in the original
carton. When shipping Lithium lon batteries please visit our Web Site
at www.panasonic.com/BatteryHandling as Panasonic is committed to
providing the most up to date information. Include a letter detailing the
complaint, a return address and provide a daytime phone number
where you can be reached. A valid registered receipt is required under
the Limited Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE
PURCHASER WILL BE REQUIRED TO FURNISH A SALES
RECEIPT/PROOF OF PURCHASE INDICATING DATE OF
PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE.
CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT
RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or
workmanship, and DOES NOT COVER normal wear and tear or
cosmetic damage. The warranty ALSO DOES NOT COVER damages
which occurred in shipment, or failures which are caused by products
not supplied by the warrantor, or failures which result from accidents,
misuse, abuse, neglect, mishandling, misapplication, alteration, faulty
installation, set-up adjustments, misadjustment of consumer controls,
improper maintenance, power line surge, lightning damage,
modification, introduction of sand, humidity or liquids, commercial use
The model number and serial number of this product can be found
on either the back or the bottom of the unit.
Please note them in the space provided below and keep for
future reference.
MODEL NUMBER
SERIAL NUMBER
such as hotel, office, restaurant, or other business or rental use of the
product, or service by anyone other than a Factory Service Center or
other Authorized Servicer, or damage that is attributable to acts of
God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED
UNDER “LIMITED WARRANTY COVERAGE".
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS
WARRANTY.
(As examples, this excludes damages for lost time, travel to and from
the servicer, loss of or damage to media or images, data or other
memory or recorded content. The items listed are not exclusive, but for
illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE
WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE
PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied
warranty lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have
other rights which vary from state to state. If a problem with this
product develops during or after the warranty period, you may contact
your dealer or Service Center. If the problem is not handled to your
satisfaction, then write to the warrantors Consumer Affairs
Department at the addresses listed for the warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS
LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.
Customer Services Directory (United States and Puerto Rico)
Obtain Product Information and Operating Assistance; locate
your nearest Dealer or Service Center; purchase
Parts and Accessories; or make Customer Service and
Literature requests by visiting our Web Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-800-211-PANA (7262)
Monday-Friday Sam-Spm,
Saturday-Sunday 10am-7pm EST
For hearing or speech impaired TTY users, TTY:
1-877-833-8855
Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books online for all
Panasonic Products by visiting our Web Site at:
hitp://www.psic.panasonic.com
Or, send your request by E-mail to:
прера risœus . panasonic.com
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday-Friday 2am-8pm EST)
Panasonic Service and Technology Company
20421 84th Avenue South, Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express,
and Personal Checks)
For hearing or speech impaired TTY users, TTY:
1-866-605-1277
As of December 2010
User memo:
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
VQATIA92 33
Reference
Limited Warranty (Only for CANADA)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC PRODUCT - LIMITED WARRANTY
Panasonic Canada inc. warrants this product to be free from defects in material and workmanship under normal use and for a
period as stated below from the date of original purchase agrees to, at ifs option either (a) repair your product with new or
refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The
decision to repair, replace or refund will be made by Panasonic Canada Inc.
Technics Audio Product - One (1) year, parts and labour
Panasonic BD/DVD Product - One (1) year, parts and labour
Panasonic Audio Receivers - One (1) year, parts and labour
Home Theater Systems Product - One (1) year, parts and labour
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand
product mentioned above soid by an authorized Panasonic dealer in Canada and purchased and used in Canada, which
product was not sold “as is”, and which product was delivered to you in new condition in the original packaging.
IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR OTHER
PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS REQUIRED
LIMITATIONS AND EXCLUSIONS
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and
tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which
are caused by products not supplied by Panasonic Canada inc., or failures which result from accidents, misuse, abuse,
negiect, mishandiing, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls,
improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial
use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than an
Authorized Servicer, or damage that is attributable to acts of God.
Dry cell batteries are also excluded from coverage under this warranty.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT
WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY. (As examples, this warranty excludes damages for lost time, travel to and from the Authorized Servicer, loss of
or damage to media or images, data or other memory or recorded content. This list of items is not exhaustive, but for
illustration only.)
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the
exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives you
specific legal rights and you may have other rights which vary depending on your province or territory.
WARRANTY SERVICE
For product operation and information assistance, please contact:
PRODUCT OPERATION ASSISTANCE
Customer Care Centre: Telephone #. 1-800-561-5505
Fax #: (905) 238-2360
Email link: “Support — contact us — email” on www.panasonic.ca
PRODUCT REPAIRS
Please locate your nearest Authorized Servicentre.
Link: “Support — Panasonic Servicenire® locator” on www.panasonic.ca
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in the original carton.
Include details of the defect claimed, and proof of date of original purchase.
34 vaTIAS2
Referencia rapida en
espanol (Spanish Quick Reference)
Conexiones básicas :
Conexión a un televisor
compatible con HDMI
" - ; “ Cable HDMI
: (incluido : DMP-BD755) L= '
Conexion a un televisor con
un cable para audio/video
Cable de audio/
video
“AUDIOIN VIDEO IN
Conexión a un televisor compatible
con HDMI y a un amplificador/
receptor compatible con HDMI
HDMI IN
(ARC)
Conecte el cable de
alimentacion de CA por ultimo
una toma de corriente doméstica
e Conéctelo cuando haya realizado el resto de conexiones.
Ahorro de energía
Esta unidad consume una pequeña cantidad de energía
aunque esté ajustada en el modo de espera (Accionamiento
rápido : Desactivado, aprox. 0,1 W). Para ahorrar energía
cuando no vaya a utilizar la unidad durante mucho tiempo,
desenchúfela de la toma de corriente.
Preparación
Encienda el televisor y seleccione la entrada de vídeo
adecuada en el televisor.
O Pulse [6 POWER] para encender la
unidad.
Después de conectar su nuevo reprodutor y pulsar el
botón de encendido, aparecerá la pantalla de la
configuración básica.
O Inserte el medio.
Inicia la reproducción
Pulse [>PLAY].
Parada
Pulse [STOP].
La posición de detención se memoriza.
Función de reanudación de la reproducción
Pulse > PLAY] para reiniciar la reproducción desde esta posición.
e La posición se borra si se abre la bandeja o se pulsa
[NSTOP] varias veces para visualizar “StOP” en el visor
de la unidad.
e En los discos BD-Video incluidos los BD-J, la función
de reanudación de la reproducción no funciona.
Pausa
Pulse [IIPAUSE].
e Pulse EIPAUSE] otra vez o > PLAY] para reiniciar la
reproducción.
Búsqueda/Cámara lenta
Búsqueda
Durante la reproducción, pulse [SEARCH<<] o
[SEARCH].
e Müsica y MP3: La velocidad esta fija en un paso.
Cámara lenta
Durante la pausa, puise [SEARCH»)b].
La velocidad aumenta hasta 5 pasos.
e Pulse [>> PLAY] para recuperar la velocidad de
reproducción normal.
Salto
Durante la reproducción o la pausa, pulse [<<] o
[>>].
Salta hasta el título, capítulo o pista que desee reproducir.
e Cada pulsación aumenta el número de saltos.
voTsA92 35
Index
@ Audio © Network ‚zZ aaa 24
Changingaudio ............ 14 Connection ................ 9
Language .............. 21, 22 Setting. ............... 11, 24
@BD-Live.................... 16 Network Service ............ 18
O) DLNA............. aerea. 19 OQ Playlists ................... 15
Q File format. ................. 30 Pop-upmenu............... 14
Firmware update ............ 12 ® Quick Start................. 25
(LEE 9 Q Restore Default Settings. ..... 25
Language Resume play function. ....... 14
dio Ce 21, > © Subtitle. ................... 21
On-screen. 53 @USBdevice iii 7
Soundtrack... .............. 21 O VIERA Link"
Subtitle................ 21,22 “HDAVI Control". .......... 20
VIDEO
” POWERED
CERTIFIED"
ISITAL AUDIO
USA Only: Disposal may be regulated in your community
due to Environmental considerations. For disposal or
recycling information, please visit Panasonic Website:
http://www.panasonic.com/environmental
or call 1-888-769-0149.
Information on Disposal in other Countries outside
the European Union
This symbol is only valid in the European
Union.
If you wish to discard this product, please
contact your local authorities or dealer and ask
As an ENERGY STAR" Partner* Panasonic
has determined that this product meets the
ENERGY STAR” guidelines for energy
efficiency.
* For Canada only: The word “Participant” Is
used in place of the word “Partner”.
Panasonic Canada Inc.
5770 Ambler Drive
Mississauga, Ontario
L4W 2T3
www.panasonic.ca
Panasonic Consumer Electronics
Company, Division of Panasonic
Corporation of North America
One Panasonic Way, Secaucus,
New Jersey 07094
http:/www.panasonic.com
for the correct method of disposal.
VQT3A92-1
F1210SK1021
© Panasonic Corporation 2010
Printed in China

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project