Yamaha YAS-306 User manual

Yamaha YAS-306 User manual
UAB
Front Surround System
Quick Start Guide
For more detailed information, refer to the Owner’s Manual on the
CD-ROM.
Caution: Do not attempt to play this CD-ROM in an audio player.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
•
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert you to the presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert you to
the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of
time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
We Want You Listening For A Lifetime
IMPORTANT
Please record the serial number of this unit in the space below.
MODEL:
Serial No.:
The serial number is located on the rear of the unit. Retain this Owner's Manual in a safe place
for future reference.
2
En
Yamaha and the Electronic Industries Association’s Consumer Electronics Group
want you to get the most out of your equipment by playing it at a safe level. One
that lets the sound come through loud and clear without annoying blaring or
distortion – and, most importantly, without affecting your sensitive hearing.
Since hearing damage from loud sounds is often undetectable until it is too late,
Yamaha and the Electronic Industries Association’s Consumer Electronics Group recommend
you to avoid prolonged exposure from excessive volume levels.
FCC INFORMATION (for US customers)
1 IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual,
meets FCC requirements. Modifications not expressly approved by Yamaha may void your
authority, granted by the FCC, to use the product.
2
IMPORTANT: When connecting this product to accessories and/or another product use only
high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all
installation instructions. Failure to follow instructions could void your FCC authorization to use
this product in the USA.
3
NOTE: This product has been tested and found to comply with the requirements listed in FCC
Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides
a reasonable level of assurance that your use of this product in a residential environment will not
result in harmful interference with other electronic devices.
This equipment generates/uses radio frequencies and, if not installed and used according to the
instructions found in the users manual, may cause interference harmful to the operation of other
electronic devices.
Compliance with FCC regulations does not guarantee that interference will not occur in all
installations. If this product is found to be the source of interference, which can be determined by
turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following
measures:
Relocate either this product or the device that is being affected by the interference.
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line
filter/s.
In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300
ohm ribbon lead, change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer
authorized to distribute this type of product. If you can not locate the appropriate retailer, please
contact Yamaha Corporation of America A/V Division, 6600 Orangethorpe Avenue, Buena Park,
CA 90620, USA.
The above statements apply ONLY to those products distributed by Yamaha Corporation of America
or its subsidiaries.
•
•
This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS
standard(s).
Operation is subject to the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received including
interference that may cause undesired operation.
NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC
radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the
radiator at least 20cm or more away from person’s body.
This transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter.
COMPLIANCE INFORMATION STATEMENT
(DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party:
Yamaha Corporation of America A/V Division
Address:
6600 Orangethorpe Avenue, Buena Park, CA 90620
Telephone:
714-522-9011
Type of Equipment: Front Surround System
Model Name:
YAS-306
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
conditions:
1) this device may not cause harmful interference, and
2) this device must accept ant interference received including interference that may cause
undesired operation.
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to wide slot and fully insert.
CAN ICES-3 (B)/NMB-3 (B)
En
3
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
4
En
To assure the finest performance, please read this manual carefully. Keep it in a safe place for future
reference.
Install this sound system in a well ventilated, cool, dry, clean place - away from direct sunlight,
heat sources, vibration, dust, moisture, and/or cold. For proper ventilation, allow the following
minimum clearances.
Top: 5 cm (2 in), Rear: 5 cm (2 in), Sides: 5 cm (2 in)
Locate this unit away from other electrical appliances, motors, or transformers to avoid humming
sounds.
Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit
in an environment with high humidity (i.e. a room with a humidifier) to prevent condensation
inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal
injury.
Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be
exposed to liquid dripping or splashing. On the top of this unit, do not place:
– Other components, as they may cause damage and/or discoloration on the surface of this unit.
– Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal
injury.
– Containers with liquid in them, as they may fall and liquid may cause electrical shock to the
user and/or damage to this unit.
Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat
radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or
personal injury.
Do not plug in this unit to a wall outlet until all connections are complete.
Do not operate this unit upside-down. It may overheat, possibly causing damage.
Do not use force on switches, knobs and/or cords.
When disconnecting the power cable from the wall outlet, grasp the plug; do not pull the cable.
Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.
Only voltage specified on this unit must be used. Using this unit with a higher voltage than
specified is dangerous and may cause fire, damage to this unit, and/or personal injury. Yamaha will
not be held responsible for any damage resulting from use of this unit with a voltage other than
specified.
To prevent damage by lightning, keep the power cable and outdoor antennas disconnected from a
wall outlet or this unit during a lightning storm.
Do not attempt to modify or fix this unit. Contact qualified Yamaha service personnel when any
service is needed. The cabinet should never be opened for any reasons.
When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power
plug from the wall outlet.
Be sure to refer to the “Troubleshooting” section of the Owner’s Manual on the CD-ROM for
common operating errors before concluding that this unit is faulty.
Before moving this unit, press A to set it to standby mode and disconnect the AC power plug from the wall
outlet.
Condensation will form when the surrounding temperature changes suddenly. Disconnect the
power cable from the outlet, then leave this unit alone.
19 When using this unit for a long time, this unit may become warm. Turn the power off, then leave
this unit alone for cooling.
20 Install this unit near the AC outlet and where the AC power plug can be reached easily.
21 The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. When you
dispose of batteries, follow your regional regulations.
22 Excessive sound pressure from earphones and headphones can cause hearing loss.
23 Keep the product out of reach of children to avoid them swallowing small parts.
This unit is not disconnected from the AC power source as long as it is connected to the wall
outlet, even if this unit itself is turned off by A. This state is called the standby mode. In this
state, this unit is designed to consume a very small quantity of power.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT
TO RAIN OR MOISTURE.
Do not use this unit within 22 cm (9 inches) of persons with a heart pacemaker implant or
defibrillator implant.
Radio waves may affect electro-medical devices.
Do not use this unit near medical devices or inside medical facilities.
The name plate for YAS-306 is located on the bottom of the unit.
We, Yamaha Music Europe GmbH hereby declare that this unit is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
Yamaha Music Europe GmbH
Siemensstr. 22-34 25462 Rellingen, Germany
Tel: +49-4101-303-0
■ Notes on remote controls and batteries
■ For U.K. customers
• Do not spill water or other liquids on the remote control.
• Do not drop the remote control.
• Do not leave or store the remote control in the following conditions:
– places of high humidity, such as near a bath
– places of high temperatures, such as near a heater or stove
– places of extremely low temperatures
– dusty places
• Insert the battery according to the polarity markings (+ and -).
• If the batteries grow old, the effective operation range of the remote control decreases considerably.
If this happens, replace the batteries with two new ones as soon as possible.
• If the batteries run out, immediately remove them from the remote control to prevent an explosion or
acid leak.
• If you find leaking batteries, discard the batteries immediately, taking care not to touch the leaked material. If the
leaked material comes into contact with your skin or gets into your eyes or mouth, rinse it away immediately and
consult a doctor. Clean the battery compartment thoroughly before installing new batteries.
• Do not use old batteries together with new ones. This may shorten the life of the new batteries or
cause old batteries to leak.
• Do not use different types of batteries (such as alkaline and manganese batteries) together. Danger of explosion may
happen if batteries are incorrectly replaced. Specification of batteries may be different even though they look the
same.
• Before inserting new batteries, wipe the compartment clean.
• Keep batteries away from children. If a battery is accidentally swallowed, contact your doctor
immediately.
• When not planning to use the remote control for long periods of time, remove the batteries from the
remote control.
• Do not charge or disassemble the supplied batteries.
If the socket outlets in the home are not suitable for the plug supplied with this appliance, it
should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions
described below.
Note
The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is
hazardous if engaged in a live socket outlet.
■ Special Instructions for U.K. Model
IMPORTANT
THE WIRES IN MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE
FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this apparatus may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the
letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the
terminal which is marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth terminal of the three pin plug.
Information for users on collection and disposal of old equipment and used
batteries:
These symbols on the products, packaging, and/or accompanying documents mean that
used electrical and electronic products and batteries should not be mixed with general
household waste.
For proper treatment, recovery and recycling of old products and used batteries, please
take them to applicable collection points, in accordance with your national legislation.
By disposing of these products and batteries correctly, you will help to save valuable
resources and prevent any potential negative effects on human health and the environment
which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please
contact your local municipality, your waste disposal service or the point of sale where you
purchased the items.
For more detailed information, refer to the Owner’s Manual on the CD-ROM. To view the
Owner’s Manual, click on “English” in the screen displayed automatically when you insert the
CD-ROM into your PC, or click on the model name if the screen to select models is displayed,
and then click on “English” in the next screen. Then, follow the onscreen instructions.
If the screen is not displayed automatically, open the “index.html” in the CD-ROM.
Caution: Do not attempt to play this CD-ROM in an audio player.
The Owner’s Manual contained in the CD-ROM can be downloaded from the following
website.
http://download.yamaha.com/
Information on Disposal in other Countries outside the European
Union:
These symbols are only valid in the European Union. If you wish to discard these items,
please contact your local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it
complies with the requirement set by the EU Battery Directive for the chemical involved.
En
5
Contents
PREPARATION
Supplied items .......................................................................7
Part names and functions .....................................................8
Installation .......................................................................... 10
Connecting the unit ............................................................ 11
Connecting the unit to a TV ........................................................................... 11
Connecting the unit to other devices......................................................... 12
PLAYBACK
Operations........................................................................... 13
NETWORKS
Networks ............................................................................. 17
Network functions and the MusicCast CONTROLLER app .................. 17
Connecting to a network ................................................................................ 17
SETTINGS
Using the TV’s remote control
to adjust the unit’s volume ................................................ 21
Clearing all learned commands.................................................................... 23
6
En
About this Quick Start Guide
This Quick Start Guide provides basic setup to use the unit and feature of the unit.
For more information, refer to Owner’s Manual in the supplied CD-ROM.
In this booklet, iOS and Android mobile devices are collectively referred to as “mobile
devices”. The specific type of mobile device is noted in explanations as needed.
NOTE
This indicates precautions for use of the product and its feature limitations.
HINT
This indicates supplementary explanations for better use.
PREPARATION
Supplied items
Preparing the remote control
Peel off the protection sheet before use.
Make sure you have received all of the following items.
The unit
Remote control
Batteries x 2
(AAA, R03, UM4)
Optical digital audio cable
(1.5 m [4.9 ft])
Operating range of the remote control
Operate the remote control within the range as shown below. When the unit is mounted
on a wall, point the remote control at the remote control sensor on the top panel (p.10).
Remote control sensor
Mounting template
Within 6 m (20 ft)
Use when mounting the unit on a wall. See page 9 in the Owner’s Manual.
Cover (for the TV remote repeater)
See page 9 in the Owner’s Manual.
Spacers × 2
Use when mounting the unit
on a wall. See page 9 in the
Owner’s Manual.
Owner’s Manual
CD-ROM
Quick Start Guide
MusicCast
Setup Guide
PREPARATION ➤ Supplied items
En
7
Part names and functions
The unit (front panel/top panel)
1
STATUS
TV
BD/DVD
ANALOG BLUETOOTH
8
2
NET
SURROUND
3
4
5
6
Keys are located in the rear
part of the unit.
CONNECT
7
9
8
9
7
1 Indicators
3
The indicators on the top panel flash or glow, to show
the operation and setting status.
In this manual, illustrations of the nine in-line
indicators are used for explanation as necessary.
: Off
: Glows
: Flashes
Example: When the STATUS indicator glows, and
the
indicator flashes
(input) key
Select an input source to be played back (p.13).
4
(mute) key
Mute the audio output. Press the key again to unmute
(p.14).
5
/
(volume +/-) keys
Adjust the volume (p.14).
6
(power) key
Turn on or off the unit (p.13).
2 CONNECT key
Use to connect the unit to a network using the
MusicCast CONTROLLER app (p.18).
8
En
PREPARATION ➤ Part names and functions
HINT
• The unit may automatically turn off when the auto power
standby function is enabled (p.29 in the Owner’s Manual).
7 Remote control sensors
Receive infrared signals from the remote control of
the unit (p.7) or TV’s remote control (p.10).
The remote control sensors are located on the front
panel and on the top panel of the unit (p.10).
8 Dual built-in subwoofers
The built-in subwoofers are located in the top part of
the unit.
9 Speakers
The unit (rear panel)
1
2
3
4
5
6
R
TV
1 Power cable
For connecting to an AC wall outlet (p.11).
2 TV remote repeater
Used to transmit signals from the TV’s remote
control, received by the unit’s remote control sensor,
to the TV (p.10).
3 TV input jack
For connecting to a TV with an optical digital audio
cable (p.11).
BD/DVD
NETWORK
ANALOG
7
8
SUBWOOFER OUT
SERVICE ONLY
L
4 BD/DVD input jack
For connecting to a playback device, such as a Bluray Disc (BD) player, with a coaxial digital audio
cable (p.12).
5 NETWORK jack
For connecting to a network with a network cable
(p.17).
7 SUBWOOFER OUT jack
For connecting to an external subwoofer with an RCA
mono cable (p.29 in the Owner’s Manual).
8 SERVICE ONLY jack
Used only for after-sales servicing. This jack is not
normally used.
6 ANALOG input jacks
For connecting to an external device with a stereo
cable (p.11, 12).
PREPARATION ➤
Part names and functions
En
9
Installation
The unit can be installed on a TV stand or mounted on a wall.
It is equipped with remote control sensors positioned to support installation on a TV stand or mounting on a wall.
Installing the unit on a TV stand, etc.
Mounting the unit on a wall
Position the unit so that the keys are on the far side of the unit.
Mount the unit on the wall so that the keys face upwards. Follow the instructions
on page 9 in the Owner’s Manual when mounting the unit on a wall.
Cautions
• Do not stack the unit and a BD player
or other device directly on each other.
Doing so may cause a malfunction
due to vibrations.
• Do not hold the speaker portion
(fabric parts) on the front and the top
of the unit.
• The unit contains non-magnetic
shielding speakers. Do not place
magnetically sensitive items (hard
disk drive, etc.) near the unit.
• Depending on your installation
environment, it may be better to
connect the unit and external devices
before installing the unit.
Keys
Remote control sensor (front panel)
About the TV remote repeater
The unit receives signals from the TV’s remote control via the remote control sensor
located on the front panel. It then transmits these signals from the TV remote repeater
located on the rear panel. See page 8 in the Owner’s Manual for more information.
TV remote repeater
TV’s remote control
More than 5 cm (2 in)
TV remote control sensor
10
En
PREPARATION ➤ Installation
Caution
• When mounting the unit on a wall, all
installation work must be performed
by a qualified contractor or dealer.
The customer must never attempt to
perform this installation work.
Improper or inadequate installation
could cause the unit to fall, resulting
in personal injury.
Keys
Remote control sensor
(top panel)
Connecting the unit
The way in which the unit is connected will vary depending upon the type of jacks with
which the TV or playback devices (BD/DVD player, etc.) are equipped, and how the TV
and playback devices are connected. Refer to the connection examples on pages 11
and 12 to connect the unit.
1
2
Be sure that the unit’s power cable is not plugged into an AC wall
outlet.
Connecting the unit to a TV
Connection method 1: Connect the unit to a TV
A If the TV has an optical audio output jack
Connect one end of the supplied optical digital audio cable to the unit’s TV input jack,
and the other to the optical digital audio output jack on the TV.
B If the TV has no optical audio output jack
Use an optional stereo cable to connect the unit’s ANALOG input jacks to the analog
audio output jacks on the TV.
Playback device
(such as a BD/DVD player)
Refer to the connection examples on pages 11 and 12 to connect the
unit to a TV and playback devices.
HDMI input
To connect the unit using the supplied optical digital audio cable, remove the cap,
confirm orientation, and then plug it firmly into the TV input jack.
HDMI output
TV
R
A
Optical digital audio
output
HINT
• Connect the supplied optical digital audio cable to the TV input jack, a coaxial digital audio cable to
the BD/DVD input jack, and a stereo cable to the ANALOG input jacks.
3
4
Plug the unit’s power cable into an AC wall outlet.
Set TV volume as low as possible, or disable output from the TV’s
built-in speaker(s).
Caution
Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug or
terminal.
(supplied)
BD/DVD
NETWORK
ANALOG
SUBWOOFER OUT
or
B
Analog audio output
(red/white)
To watch TV or play content from other devices
Change the
TV's input
source
When watching
TV
Switch to the input source for watching TV (select
the same input source used before the unit was
connected to the TV).
When playing
content from a
device
Switch to the input source for the BD/DVD player
or other device.
HINT
• If a setting to disable the speaker output is not available on your TV in step 4, you may disable it by
connecting headphones to the headphones jack on the TV. For details, refer to the manuals of the TV.
• The TV and BD/DVD input jacks support the following audio signals.
− PCM (2 channel)
− Dolby Digital (up to 5.1 channel)
− DTS Digital Surround (up to 5.1 channel)
TV
L
Press the input keys on the unit's remote control
to change the unit’s input source.
A:
Select the unit’s input source
B:
NOTE
• When sound from the TV cannot be output in a digital
audio format (Dolby Digital or DTS Digital Surround), be
sure that the TV’s digital audio output is set to PCM
(2ch).
PREPARATION
➤ Connecting the unit
En
11
Connection method 2: Connect the unit to a playback device
(BD/DVD player, etc.)
Use this method to connect the unit to a playback device when it cannot be connected to
the TV as explained with method 1 because the TV has no optical digital audio output
jack or analog audio output jacks.
This method can also be used to connect the unit to a playback device, after it has been
connected to the TV, when sound from a BD/DVD player or other device connected to
the TV is not output as surround sound.
A If the playback device has an optical digital audio output jack
Connect one end of the supplied optical digital audio cable to the unit’s TV input jack,
and the other to the optical digital audio output jack on the playback device.
B If the playback device has no optical digital audio output jack
Connect one end of an optional coaxial digital audio cable to the unit’s BD/DVD input
jack, and the other to the coaxial digital audio output jack on the playback device.
Connecting the unit to other devices
Connect devices such as CD/DVD players or game consoles to the unit for dynamic
sound playback. Use an optical digital audio cable, coaxial digital audio cable, or stereo
cable to connect audio output jack(s) on each playback device to input jack(s) on the
unit.
CD/DVD player, game console, etc.
Analog audio output
(red/white)
R
TV
BD/DVD
NETWORK
ANALOG
L
SUBWOOFER OUT
Optical digital audio
output
Playback device
(such as a BD/DVD player)
R
A
Optical digital audio
output
(supplied)
TV
BD/DVD
NETWORK
ANALOG
Coaxial digital audio
output (orange)
L
SUBWOOFER OUT
or
B
To watch video from an external device
Change the TV's input
source
Coaxial digital audio
output (orange)
Select the unit’s input
source
To watch video from a playback device connected to the TV
Change the TV's input
source
Switch to the input source for the BD/DVD player or
other playback device connected to the TV.
Select the unit’s input
source
Press the input keys on the unit's remote control to
change the unit’s input source.
A:
12
En
PREPARATION ➤ Connecting the unit
B:
Switch to the input source for the external device.
To play sound from an external device, press the input
key (ANALOG, TV, or BD/DVD) that corresponds to the
jack(s) on the unit to which the external device is
connected.
NOTE
• When sound from the external device cannot be output in a
digital audio format (Dolby Digital or DTS Digital Surround), be
sure that the device’s digital audio output is not set to PCM
(2ch).
• If volume can be adjusted using the device connected to the
unit’s ANALOG input jacks, set that device's volume to the
same level as that of other devices connected to the unit’s TV
and BD/DVD input jacks to prevent volume from being louder
than expected.
PLAYBACK
Operations
Remote control signal transmitter
Transmits infrared signals.
1
2
(power) key
Turns on or off the unit.
Turned on
The indicator for the last input
source selected glows green.
Indicates the surround setting, and network
(p.17) or Bluetooth (p.16 in the Owner’s
Manual) connection status.
Turned off (network standby function enabled,
p.30 in the Owner’s Manual)
Input keys
Select an input source to be played back.
TV ......................TV audio or sound from a device
connected to the unit’s TV input jack
BD/DVD.............Sound from a device connected to
the BD/DVD input jack
ANALOG...........Sound from a device connected to
the ANALOG input jacks
BLUETOOTH ....Sound from a Bluetooth connected
device
NET ...................Audio acquired via a network
The last audio source listened to is
selected when the NET key is
pressed.
The indicator for the selected input source glows.
(Example: when TV is selected)
TV
Glows (red)
Turned off
BD/DVD
ANALOG
BLUETOOTH
NET
HINT
• To play sound from the device connected to the TV or to
watch video from the device, set the TV’s input source to the
playback device.
• For playback from a Bluetooth device, refer to page16 in the
Owner’s Manual. For audio playback via a network, refer to
pages 22 to 25 in the Owner’s Manual.
HINT
• When the unit is turned on for the first time after purchase,
the
indicator flashes slowly.
3
SURROUND and STEREO keys
While the
indicator is flashing, network settings from
your iOS device (an iPhone, etc.) can be applied to the unit
to connect the unit to a wireless network. For details on
settings, see “Playing back music with AirPlay” (p.24 in the
Owner’s Manual). Press any key on the remote control to
cancel this function if it will not be used.
The
indicator does not flash if the unit’s NETWORK jack
is connected to a router using a cable (wired connection).
Switch between surround and stereo (2 channels)
playback. When surround playback is selected, you
can enjoy a realistic sound effect using Yamaha’s
exclusive AIR SURROUND XTREME.
SURROUND........
STEREO..............
SURROUND
SURROUND
Glows (surround playback)
Off (stereo playback)
HINT
• Dolby Pro Logic II is used when 2-channel stereo signal is
played in surround.
• The TV PROGRAM, MOVIE, MUSIC, SPORTS, or GAME
surround mode can be selected using the MusicCast
CONTROLLER app (p.18) installed on a mobile device.
PLAYBACK
➤ Operations
En
13
4
5
SUBWOOFER (+/-) keys
NET RADIO (1–3) keys
Adjust the volume of the subwoofer.
Assign audio input via a network (Internet radio
stations, music files stored on media servers, etc.)
to the NET RADIO key.
Volume down (–)
Volume up (+)
VOLUME (+/-) keys
Adjust the volume of the unit.
Volume down (–)
Volume up (+)
MUTE key
Mute the audio output. Press the key again to
unmute.
Flash (on mute)
14
En
PLAYBACK ➤ Operations
Assign a station
1 Play the desired Internet radio station (p.22
to 25 in the Owner’s Manual).
2 Hold down the NET RADIO 1, 2, or 3 key for
more than 3 seconds.
Tune-in to an assigned Internet radio station
1 Press the NET RADIO 1, 2, or 3 key to which
the desired Internet radio station has been
assigned.
HINT
• When an Internet radio station is assigned to the NET
RADIO 1, 2, or 3 key on the remote control, the same station
is also registered with No. 1, 2, or 3 in the MusicCast
CONTROLLER app’s “Favorites”. When an Internet radio
station is registered with No. 1, 2, or 3 in “Favorites” with the
MusicCast CONTROLLER app, the same station is also
assigned to the NET RADIO 1, 2, or 3 key on the remote
control.
6
BASS EXTENSION key
AUDIO DELAY key
Enable/disable the bass extension function. When
this function is enabled, you can enjoy a powerful
bass sound with the Yamaha original bass boost
technology “Advanced Bass Extension
Processing.”
Adjust the audio delay to synchronize the sound
with the video when the video image on the TV
may seem delayed with respect to the sound.
Follow the procedure below to adjust the audio delay.
Enabled: Flashes three times and goes out
Disabled: Flashes once and goes out
CLEAR VOICE key
Enable/disable the clear voice function.
When this function is enabled, human voices such
as lines in movies and TV shows, or news and
sport commentary, are played clearly.
Enabled: Flashes three times and goes out
Disabled: Flashes once and goes out
NOTE
• The audio delay cannot be adjusted in the following
situations.
− When Bluetooth or NET is selected as the input source.
− When sound is distributed from the unit to one or more
other MusicCast-enabled devices.
1 Hold down the AUDIO DELAY key for more
than 3 seconds.
The indicator at far left flashes.
2 Press the SUBWOOFER (+/-) key to adjust the
audio delay.
Pressing the SUBWOOFER (+) key delays the
audio output timing.
(–)
(+)
3 To finish the adjustment, press the AUDIO
DELAY key.
HINT
• The adjustment will be finished automatically if no
operations are performed for 20 seconds.
PLAYBACK
➤ Operations
En
15
7
INFO key
HINT
While the INFO key is held down, status, including
the type of audio signal being input and whether
the clear voice function is enabled or disabled, can
be confirmed by the glowing of indicators.
• The unit is able to play the following types of audio signal.
The indicators do not glow when analog or PCM audio signal
is input.
− Analog signal
− PCM (2 channels)
− Dolby Digital
− DTS Digital Surround
Type of audio signal being input
DTS Digital Surround
Green
Dolby Digital
Green
8
Dolby Pro Logic II is used (when 2-channel
stereo signal is played in surround)
DIMMER key
Change the brightness of the indicators. Each time
the key is pressed, the brightness of the indicators
changes as follows.
Dim (default setting) → Off → Bright
↑
Green
Unit functions and positioning
The bass extension function is enabled
8
Indicators glow brightly just after operation and
change to the specified brightness after a few
seconds.
Green
The clear voice function is enabled
9
Green
When positioned on top of something, such as a TV stand
Green
When mounted on a wall
LEARN key
Blue
16
En
PLAYBACK ➤ Operations
9
The unit enters learning mode, in which it can
learn TV remote control commands (p.21).
NETWORKS
Networks
Network functions and the MusicCast CONTROLLER
app
A network connection allows you to listen to Internet radio stations or music streaming
services, and to use AirPlay to play music files, or to play music files stored on your
computer (media server) via this unit.
Most playback requires the “MusicCast CONTROLLER” app for mobile devices. Install
and use the MusicCast CONTROLLER app on your mobile device to play music files.
Connecting to a network
Choose a wired or wireless network connection based on your network environment.
Wired network connections
To use a wired network connection, connect the unit to a router via an STP network
cable (category 5 or higher straight cable; not supplied).
Proceed from network connection to playback in the following sequence.
Network Attached
Storage (NAS)
Internet
a Choose a wired network connection (p.17) or a wireless network connection
(p.18).
WAN
b Use the MusicCast CONTROLLER app to connect the unit to a network, and
LAN
Modem
register the unit as a MusicCast-enabled device (p.18).
PC
c Use the MusicCast CONTROLLER app to play music over a network* (p.22 to 25
Network cable
Router
in the Owner’s Manual).
* AirPlay can be used to play music files without using the MusicCast CONTROLLER
app.
Mobile device
NETWORK
NOTE
• To use network function, the unit, your PC and mobile device must be connected to the same router.
• When using a multiple SSID router, access to the unit might be restricted depending on the SSID to
connect. Connect the unit and mobile device to the same SSID.
• Some security software installed on your computer, or network device settings (such as a firewall), may
block the unit’s access to your computer or Internet radio stations. Should this occur, change security
software and/or network device settings.
• A network connection cannot be established if the MAC address filter on your router is enabled. Check
your router’s settings.
• To configure your router’s subnet mask manually, apply the same subnet used by this unit to all devices.
• Use of a broadband connection is recommended when using Internet services.
• The unit cannot be connected to a network that requires manual setup. Connect the unit to a DHCPenabled router.
HINT
• If network connections or settings are changed, use the MusicCast CONTROLLER app to connect the unit
to a network and register the unit as a MusicCast-enabled device again (p.18).
NETWORKS
➤ Network functions and the MusicCast CONTROLLER app
En
17
Wireless network connections
Connect the unit to a wireless router (access point) to use a network.
Refer to the following for instructions on connecting to a wireless router (access point).
• Using the MusicCast CONTROLLER app (p.18)
• Applying iOS device (iPhone, etc.) settings to the unit (p.24 in the Owner’s Manual)
Connecting with the MusicCast CONTROLLER app
(registering the unit as a MusicCast-enabled device)
Install the MusicCast CONTROLLER app on your mobile device to connect the unit to a
network and register it as a MusicCast-enabled device.
HINT
• Confirm that your mobile device is connected to your home router before beginning.
• This section uses MusicCast CONTROLLER app screens displayed in English on an iPhone as examples.
• MusicCast CONTROLLER app screens and menu labels are subject to change without prior notice.
Internet
Wireless router (access point)
1
Search for “MusicCast CONTROLLER” on the App Store or Google Play.
Modem
2
Mobile device
The
indicator on the unit glows when the unit is connected to a wireless network.
Glows (green)
NOTE
• If the unit and the wireless router (access point) are too far apart, the unit may not connect to a wireless
router (access point). In such case, place them close to each other.
18
En
NETWORKS ➤
Install the MusicCast CONTROLLER app on your mobile device, and
open the app.
Connecting to a network
Tap “Setup”.
3
5
Turn on the unit, and then tap “Next”.
Follow the on-screen instructions to configure network settings.
HINT
• When a screen like that below is displayed, follow the on-screen instructions to configure network
settings.
1. Use the Home button on your mobile device to return
to the Home screen.
2. Select “Wi-Fi” from “Settings”.
3. Select “MusicCastSetup” from “CHOOSE A
NETWORK...”.
4. Use the Home button to return to the MusicCast
CONTROLLER app.
4
Hold down the CONNECT key until the
flashing.
indicator on the unit starts
• When a screen like that at left below is displayed, select the network to which the unit will be
connected and enter the router’s password (encryption key).
The router’s password (encryption key) is often noted on the router itself. Refer to documentation
supplied with the router for details.
NETWORKS ➤ Connecting to a network
En
19
6
To register the unit as a MusicCast-enabled device, configure the
following items.
• Location name (“home”, “John’s house”, etc.)
• Name and photo of the room where the unit is installed
The location name, and the name and photo of the room where the unit is installed
can be changed later.
Network connection with the MusicCast CONTROLLER app is now complete, and the
unit has been registered as a MusicCast-enabled device.
20
En
NETWORKS ➤
Connecting to a network
HINT
• If a different MusicCast-enabled device is already registered with the MusicCast CONTROLLER app, tap
(Setup) in the room selection screen, and then select “Add New Device” to add the unit to the app.
Tap
SETTINGS
Using the TV’s remote control
to adjust the unit’s volume
2
Point the unit’s remote control at the appropriate remote control
sensor on the unit, and hold down the LEARN key for at least 3
seconds.
The unit will enter learning mode. The unit’s indicators will flash as shown below.
The unit can be “taught” to read signals from a TV’s remote control. This allows the TV
and unit to be turned on or off simultaneously, or the volume to be adjusted, using the
TV’s remote control.
STATUS
NOTE
TV
BD/DVD
ANALOG
BLUETOOTH
NET
SURROUND
Green (when the unit is installed on a TV stand)
Blue (when the unit is mounted on a wall)
• This function is available only if the TV’s remote control uses infrared (IR) signal. A remote control that
uses radio signals cannot be used.
NOTE
For cable or satellite set-top box users
Use the TV’s remote control (not the remote control for the cable or satellite set-top
box) to teach the unit TV remote control commands.
Once the unit is taught TV remote control commands, the remote control for the cable
or satellite set-top box can be used to operate the unit.
1
Turn off the unit and the TV.
If the TV is on while the unit is learning TV remote control commands, light emitted
by the TV may interfere with the learning process.
Off
• Only the TV’s remote control and the keys on the unit are used for steps 3 through 6. The unit’s
remote control is not used.
• If the unit has already learned functions, indicators will glow as follows.
Mute: BD/DVD
Volume (-): ANALOG
Volume (+): BLUETOOTH
Power: NET
If the unit is taught TV remote control commands by following steps 3 through 7, all previous learning
will be cleared. To prevent this, press the LEARN or
(power) key on the unit’s remote control to
cancel learning mode.
• Learning takes place all at once. Be sure to teach the unit all necessary TV remote control
commands at once, as attempting to teach the unit additional commands later will clear all previous
learning.
Off
SETTINGS ➤ Using the TV’s remote control to adjust the unit’s volume
En
21
3
3-1
4
Teach the unit the TV remote control’s “Mute” command.
Press the
key on the unit.
4-1
CONNECT
Press the
key on the unit.
CONNECT
Indicators
3-2
Teach the unit the TV remote control’s “Volume (–)” command.
Indicators
Point the TV’s remote control at the remote control sensor on the unit, hold
down the mute key for at least 1 second, and then release it for at least 1
second. Perform this operation twice.
The position of the remote control sensor varies depending upon the installation of
the unit (p.10).
4-2
Point the TV’s remote control at the remote control sensor on the unit, hold
down the volume (–) key for at least 1 second, and then release it for at least
1 second. Perform this operation twice.
Bleep/
buzzer
Result
Approx. 30 cm (1 ft)
Successfully
learned
Once
Failed to learn
Repeat from Step
4-1.
Twice
Glows
TV’s remote control
Hold down
(for at least 1 second)
Result
Successfully
learned
Failed to learn
Repeat from Step
3-1.
Release
(for at least 1 second)
Hold down
(for at least 1 second)
Bleep/
buzzer
Release
5
5-1
Indicators
Indicators
Flash
Teach the unit the TV remote control’s “Volume (+)” command.
Press the
key on the unit.
CONNECT
Indicators
Once
Glows
5-2
Twice
Flash
Point the TV’s remote control at the remote control sensor on the unit, hold
down the volume (+) key for at least 1 second, and then release it for at least
1 second. Perform this operation twice.
Result
Bleep/
buzzer
Indicators
Troubleshooting the unit’s failure to learn commands
✓ Is the TV turned off?
✓ Is direct sunlight or fluorescent light striking the unit and interfering with operation?
✓ Are you using the TV's remote control for Steps 3 though 6? (The unit's remote control is not
used.)
✓ Are you using the remote control within the range indicated above?
✓ Are you holding down keys on the TV’s remote control for at least 1 second, and then releasing
them for at least 1 second?
If the unit fails to learn commands even after checking all of the above, hold down and release the
key on the TV’s remote control three times.
22
En
SETTINGS ➤ Using the TV’s remote control to adjust the unit’s volume
Successfully
learned
Once
Failed to learn
Repeat from Step
5-1.
Twice
Glows
Flash
6
6-1
Teach the unit the TV remote control’s “Power” command.
Press the
key on the unit.
Clearing all learned commands
1
CONNECT
The unit enters learning mode. When the unit is in learning mode, the indicators
flash as shown below.
Indicators
6-2
Point the TV’s remote control at the remote control sensor on the unit, hold
down the power key for at least 1 second, and then release it for at least 1
second. Perform this operation twice.
Result
7
Turn off the unit, and then hold down the LEARN key on the unit’s
remote control for more than 3 seconds.
Bleep/
buzzer
Successfully
learned
Once
Failed to learn
Repeat from Step
6-1.
Twice
Indicators
2
Hold down the
key on the unit for more than 3 seconds.
Glows
CONNECT
Flash
Indicators corresponding to learned commands turn off, and the indicators flash as
shown below.
To finish the learning mode, press the LEARN key on the unit’s
remote control.
This completes the necessary settings. Now you can operate the unit with the TV
remote control’s mute key, volume keys, or power key.
If the clearing is completed, you will hear the bleep sound three times.
3
Press the LEARN key on the unit’s remote control.
HINT
• The unit exits learning mode automatically if no operations are performed for 5 minutes.
• You can press the
key on the unit’s remote control to finish learning mode.
About TV volume
If the learning function is used to teach the unit the TV remote control’s “Volume (+)”
command, TV volume may increase along with the unit’s volume when the TV’s remote
control is used to increase volume. Should this occur, set TV volume as low as possible
using the button on the TV itself, or disable output from the TV’s internal speaker(s).
HINT
• If the volume of the speaker(s) built into the TV cannot be adjusted, speaker output can be disabled by
connecting a device such as headphones to the headphones (earphones) jack on the TV. Refer to
documentation supplied with the TV for details.
SETTINGS ➤ Using the TV’s remote control to adjust the unit’s volume
En
23
AVEG1A1102C
Important Notice:Guarantee Information for
customers in EEA* and Switzerland
English
For detailed guarantee information about this Yamaha product, and Pan-EEA* and Switzerland
warranty service, please either visit the website address below (Printable file is available at our
website) or contact the Yamaha representative office for your country. *EEA:European
Economic Area
http://europe.yamaha.com/warranty/
Yamaha Global Site
http://www.yamaha.com/
Yamaha Downloads
http://download.yamaha.com/
Manual Development Group
© 2016 Yamaha Corporation
Published 06/2016 KS-A0
Printed in Indonesia
ZV20060
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement