T I TA N I U M E X P R E S S I O N BIG HAIR PRO CONGRATULATIONS ON YOUR TITANIUM EXPRESSION PURCHASE With over 50 year’s heritage, BaByliss PRO remains the choice of the world’s best professional stylists. When it comes to perfectly styled hair our mission is to create styling tools that delivery the very highest results. We hope you enjoy using your new product from our Titanium Expression range; a luxurious collection of professional hair tools that combine high-fashion styling with innovative technology to help you achieve fast, lasting results with a flawless finish for salon performance every time. T I TA N I U M ION SHINE BAB2778U ™ SYSTEM Premium titanium gives superior smoothness and ionic conditioners deliver exceptional frizz-control for flawless results with incredible shine. IMPORTANT SAFETY CAUTIONS • This appliance should only be used as described within this instruction booklet. Please retain for reference. used, cleaned or maintained by children. • Always take extra care if used on children or near children. • Do not use on very young children. IMPORTANT CHILD SAFETY WARNING! Polythene bags over a product or package may be IMPORTANT SAFETY dangerous. To avoid danger of • UK Only: This appliance must suffocation, keep this wrapper away not be used in the bathroom. If from babies and children. This bag using the appliance in a bathroom, is not a toy. unplug after use as the proximity of water can be dangerous even WARNING! THIS APPLIANCE GETS if the appliance is switched off. HOT! For additional protection the • ALWAYS keep out of reach of installation of a residual current children (during and after use and device (RCD) with a rated residual whilst cooling). operating current not exceeding • This appliance should not be 30mA is advisable in the electrical circuit supplying the bathroom. Customer Care Line (refer to ‘UK Ask your installer for advice. After Sales Service’ section for WARNING! Do not use this further information). appliance near water contained in • Do not leave the appliance basins, bathtubs or other unattended when switched on vessels. or plugged in. • Do not use this appliance • This unit is equipped with a in the bathroom. safety thermostat. In the event • Do not immerse the appliance in of overheating the appliance water or other liquids. will either stop automatically or • Always inspect the appliance run hot and cold intermittently. before use for noticeable Should this happen, switch the signs of damage. Do not use airstyler to the “0” position, if damaged or if the appliance unplug and allow to cool for has been dropped. In the event 10 minutes. Before use, ensure of damage contact the Conair the rear filter is clear of hair and Customer Care Line (refer to ‘UK other debris. Plug in and switch After Sales Service’ section for on. If the appliance continues further information). to overheat discontinue use • Do not use the appliance if the immediately, switch off and lead is damaged. In the event unplug, and contact the Conair of damage contact the Conair Customer Care Line (refer to ‘UK After Sales Service’ section for •T his appliance should not be used further information). by adults whose reduced physical, • Do not place the appliance on sensory or mental capabilities, any heat sensitive surface whilst in or whose lack of experience and operation or whilst the product is knowledge, might cause a hazard, cooling. unless they have been correctly • Take care to avoid the hot surface instructed to understand the safe of the appliance coming into use and hazards involved and are direct contact with the skin, in adequately supervised. particular the ears, eyes, face and • After use, do not coil the lead neck. around the appliance as this may • Always ensure that the rear air cause damage to the lead. Instead, filter is kept away from hair during coil the lead loosely by the side use to prevent it being dragged of the appliance. into the fan which may cause the • This appliance complies with appliance to overheat. the requirements of Directives • Take care using this appliance 2004/108/EC (Electromagnetic when wearing jewellery, in Compatibility) and 2006/95/ particular necklaces and earrings EC (Electrical Safety of Domestic to avoid entanglement in the Appliances). rotating brush head. GETTING TO KNOW YOUR BIG HAIR PRO This professional hot air styler creates dramatic volume and shape with rotating action for an easy blow-dry finish. The 50mm barrel with a premium titanium finish and soft bristles smooth the hair to give flawless results. Ionic conditioning delivers exceptional frizz control for superior shine. FEATURES • • • • 5 0mm barrel for dramatic volume and shape R otating action for an easy, blow-dry finish P remium titanium gives flawless results S oft bristles gently grip hair to smooth and control • • • • • A dvanced ionic conditioning 7 00W 3 heat/speed settings P rotective shield S alon length 2.7m swivel cord OPERATING FEATURES 2.7m swivel power cord Rotation direction settings (<< >>) Heat/speed settings (0, I, II, III) 50mm rotating barrel HEAT/SPEED SETTINGS The Big Hair Pro features a choice of 3 heat/speed settings. Use setting ‘I’ for a lower heat and slower rotation speed ideal for finer hair styles. Use setting ‘II’ for a mid-heat and mid-rotation speed ideal for use on medium length hair. Use setting ‘III’ for a high heat and fast rotation speed ideal for use on longer or thicker hair. IMPORTANT! If the maximum setting is too hot for the hair type then select a lower temperature setting. ROTATION SETTINGS To make the brush head rotate, press the buttons marked << and >>, these buttons will make the brush head rotate in a clockwise or anti-clockwise direction. When the air styler is set on the high heat setting the brush rotation will be faster. When the air styler is set on the medium heat setting the rotation will be slower. When the air styler is set on the low heat setting the rotation will be at it’s slowest. HOW TO USE YOUR BIG HAIR PRO • Blow dry hair using a hair dryer until it’s around 80% dry and separate into sections. • Select the best heat/speed setting for your hair type using the slide switch. • To create volume at the roots, take a section of hair and use the brush to lift the hair at the roots. Hold for a few seconds for extra lift. • To create shape at the ends of the hair, run the brush from the root to the ends. As you reach the end of the hair hold the appropriate rotation button so the brush spins away from your head. • As the brush rotates, resist the rotation of the brush by pulling the brush downwards. This will create tension through the section of hair to smooth and shape the ends. • Repeat as necessary on all sections of hair. • Switch the styler off by switching the slide switch to the ‘0’ position. Remove from the socket, allow to cool and place the protective shield over the brush head to protect the bristles, before storing away. PROTECTIVE COVER After every use, always ensure the protective cover is placed over the brush head. This protects the bristles from damage. When placing the protective cover over the brush head, ensure to line it up with the grooves around the top of the airstyler so it slides easily into place. NOTE: The diagram on the protective cover demonstrates the direction it should be placed on to the brush head. If placed on incorrectly it may be difficult to remove. CLEANING & MAINTENANCE To help keep your appliance in the best possible condition follow the steps below: General • Do not wrap the lead around the appliance, instead coil the lead loosely by the side when storing away. • Do not use the appliance at a stretch from the power point. • Always unplug after use. Cleaning the Filter • Unplug the appliance and let it cool completely before cleaning. • Holding the handle of the appliance firmly pull the top of the rear filter towards you, this will enable the rear filter to open. • Using a soft brush, clean any hair and other debris from the filter. • Replace the rear filter by pushing back into position. • To clean the outside of the appliance, wipe with a damp cloth. Make sure no water enters the appliance and it is completely dry before use. UK GUARANTEE This BaByliss PRO appliance is guaranteed for salon use for 6 months. This guarantee covers defects under normal use from date of purchase and ceases to be valid in the event of alteration or repair by unauthorised persons. If the appliance does not perform satisfactorily due to defects in materials or manufacture, it will be repaired or replaced through Conair UK After Sales Service. The Conair Group Ltd reserves the right to amend terms and specifications without prior notice. This guarantee in no way affects your statutory rights. UK AFTER SALES SERVICE For further advice on using the appliance or should you need to return your product, please contact the Conair Customer Care Line on 03705 133191 (09:00 to 17:00 Monday to Friday) or email your enquiry to firstname.lastname@example.org. The return address is: Customer Care Centre, Conair Logistics Unit 4, Revolution Park Buckshaw Avenue Buckshaw Village Chorley PR7 7DW Please enclose your returns number, name and address details, together with a copy of proof of purchase and details of the fault. SAFE DISPOSAL The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be handed to an appropriate collection point for the recycling of Electrical and Electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about the recycling of this product, please contact your local council office or your household waste disposal service. UK WIRING INSTRUCTIONS The wires in the mains lead are coloured in accordance with the following code: BLUE = NEUTRAL BROWN = LIVE As the colours of the wire in the mains lead of this appliance may not correspond with the colour marking identifying the terminals on your plug, proceed as follows: • The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N. • The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L. • Neither the BLUE nor BROWN wires should be connected to the terminal which is marked with the letter E or the symbol. This appliance is supplied fitted with a BS1363 mains plug and a BS1362 5A fuse. If this plug is removed from the appliance please ensure it is disposed of safely as a disconnected plug is dangerous if reconnected to the mains. If any other type of plug is used, a 5A fuse must be fitted.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project