Computer Setup (F10) Utility Guide

Computer Setup (F10) Utility Guide

Computer Setup (F10) Utility

Guide

HP Compaq dx2200 Microtower Business

PC

Document Part Number: 413759-001

January 2006

This guide provides instructions on how to use Computer Setup. This tool is used to reconfigure and modify computer default settings when new hardware is installed and for maintenance purposes.

© Copyright 2006 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice.

Microsoft and Windows are trademarks of Microsoft Corporation in the U.S. and other countries.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

This document contains proprietary information that is protected by copyright.

No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard

Company.

Å

WARNING: Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life.

Ä

CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information.

Computer Setup (F10) Utility Guide

HP Compaq dx2200 Microtower Business PC

First Edition (January 2006)

Document Part Number: 413759-001

Contents

Computer Setup (F10) Utility

Computer Setup (F10) Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Using Computer Setup (F10) Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

System Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Product Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

SKU Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Processor Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Processor Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

CPUID/Patch ID. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Cache Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Memory Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

System ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Integrated MAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

UUID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

System Serial #. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Asset Tracking Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Enter Asset Tag No. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

CPU Clock Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Standard CMOS Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Date (mm:dd:yy) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Time (hh:mm:ss) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

PATA Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

PATA Ch 0 Master. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

PATA Ch 0 Slave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

SATA Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

SATA Ch 1 Master. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

SATA Ch 2 Master. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Floppy Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Drive A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Halt On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Computer Setup (F10) Utility Guide www.hp.com

iii

Contents

POST Delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Advanced BIOS Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Device Boot Disabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

F9 Boot Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Removable Device Boot Seq.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Hard Disk Boot Seq.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Optical Drive Boot Seq. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Network Boot Seq. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

First Boot Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Second Boot Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Third Boot Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Fourth Boot Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Boot Up NumLock Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Security Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

APIC Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

MPS Version Control for OS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

BIOS Write Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Execute Disable Bit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

E.I.S.T. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Advanced Chipset Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

UMA Frame Buffer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Init Display First. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

SURROUNDVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Auto Detect PCI Clk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Integrated Peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Onboard HD Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

OnChip USB Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

USB Legacy Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Onboard LAN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Onboard LAN Boot ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Onboard Serial Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Onboard Parallel Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Parallel Port Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

ECP Mode Use DMA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Power Management Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

ACPI Suspend Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

After AC Power Loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

External Mocdem S5 Wake-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

iv www.hp.com

Computer Setup (F10) Utility Guide

Contents

RTC Alarm Resume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Date (of Month) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Resume Time (hh:mm:ss) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

PnP/PCI Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Reset Configuration Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Resources Controlled By . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

IRQ Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Maximum Payload Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

PC Health Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

System Fan Fail Check. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Smart Fan Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Current CPU Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Current System Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Current CPU Fan Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Current System Fan Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Vcore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

+12V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

VCC5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

+3.3V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

VBAT (V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3VSB (V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Load Optimized Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Set Supervisor Password. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Set User Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Save & Exit Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Exit Without Saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Recovering the Configuration Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Backing up the CMOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Restoring the CMOS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Computer Setup (F10) Utility Guide www.hp.com

v

Computer Setup (F10) Utility

Computer Setup (F10) Utilities

Use Computer Setup (F10) Utility to do the following:

Change factory default settings.

Set the system date and time.

Set, view, change, or verify the system configuration, including settings for processor, graphics, memory, audio, storage, communications, and input devices.

Modify the boot order of bootable devices such as hard drives, diskette drives, optical drives, or USB flash media devices.

Restrict a device from booting the unit.

Run hard drive self-tests.

View CPU and system temperatures.

Enter the Asset Tag or property identification number assigned by the company to this computer.

Establish a supervisor password that controls access to Computer

Setup (F10) Utility and the settings described in this section.

To secure integrated I/O functionality, including the serial, USB, or parallel ports, audio, or embedded NIC, so that they cannot be used until they are unsecured.

Enable or disable removable media boot ability.

Enable or disable legacy diskette write ability (when supported by hardware).

Computer Setup (F10) Utility Guide www.hp.com

1

2

Computer Setup (F10) Utility

Using Computer Setup (F10) Utilities

Computer Setup can be accessed only by turning the computer on or restarting the system. To access the Computer Setup Utility menu, complete the following steps:

1. Turn on or restart the computer. If you are in Microsoft Windows, click

Start > Shut Down > Restart

.

2. As soon as the computer is turned on, press and hold the

F10

key until you enter Computer Setup.

If you do not press the

F10

key at the appropriate time, you must restart the computer and press and hold the

F10

key again to access the utility.

3. The Computer Setup Utility screen is divided into menu headings and actions.

Eight menu headings appear on the Computer Setup Utility screen:

System Information

Standard CMOS Features

Advanced BIOS Features

Advanced Chipset Features

Integrated Peripherals

Power Management Setup

PnP/PCI Configurations

PC Health Status

www.hp.com

Computer Setup (F10) Utility Guide

Computer Setup (F10) Utility

Four action choices are listed on the Computer Setup Utility screen:

Load Optimized Defaults

Set Supervisor Password

Set User Password

Save & Exit Setup

Exit Without Saving

Use the arrow keys to select the appropriate heading, then press

Enter

. Use the arrow (up and down) keys to select the option you want, then press

Enter

. To return to the previous screen, press

Esc

.

4. To apply and save changes, press

F10

or select Save & Exit

Setup on the Computer Setup Utility screen and press

Enter

.

If you have made changes that you do not want applied, select

Exit Without Saving and press

Enter

.

Ä

CAUTION: Do NOT turn the computer power OFF while the ROM is saving the F10 Computer Setup changes because the CMOS could become corrupted. It is safe to turn off the computer only after exiting the

F10 Setup screen.

Computer Setup (F10) Utility Guide www.hp.com

3

4

Computer Setup (F10) Utility

Computer Setup

Heading

System

Information

Option

Product Name

SKU Number

Processor Type

Processor Speed

CPUID/Patch ID

Cache Size

Memory Size

System ROM

Integrated MAC

UUID

System Serial #

Asset Tracking Number

Enter Asset Tag No.

Description

(view only)

(view only)

(view only)

(view only)

(view only)

(view only)

(view only)

(view only)

(view only)

(view only)

(view only)

(view only)

Enter asset tag number assigned by the company (maximum 18 characters).

(view only) CPU Clock Ratio

Standard

CMOS

Features

Date (mm:dd:yy)

Time (hh:mm:ss)

Allows you to set system date.

Allows you to set system time.

Support for specific Computer Setup options may vary depending on the hardware configuration.

www.hp.com

Computer Setup (F10) Utility Guide

Computer Setup (F10) Utility

Computer Setup (Continued)

Heading Option Description

Standard

CMOS

Features

(continued)

PATA Controller

PATA Ch 0 Master

PATA Ch 0 Slave

Disables/enables PATA Controller

For each, if PATA HDD is used, allows you to:

• run HDD self-test for selected channel:

• SMART Status Check

– Target Disk

– SMART

– SMART Status Check

• HDD Short Self-Test

– Target Disk

– Estimated Test Time

– Start Test

• HDD Extended Self-Test

– Target Disk

– Estimated Test Time

– Start Test

• set device details on selected channel to:

• None

• Auto

• Manual

• set access mode on selected channel to:

• CHS (Cylinder-Head-Sector)

• LBA (Logical Block Addressing)

• Large

• Auto

• view:

• Firmware Version

• Capacity

• Cylinder

• Head

• Precomp

• Landing Zone

• Sector

Support for specific Computer Setup options may vary depending on the hardware configuration.

Computer Setup (F10) Utility Guide www.hp.com

5

6

Computer Setup (F10) Utility

Computer Setup (Continued)

Heading

Standard

CMOS

Features

(continued)

Option

SATA Controller

SATA Ch 1 Master

SATA Ch 2 Master

Description

Disables/enables onboard SATA controller.

For each, allows you to:

• run HDD self-test for selected channel:

• SMART Status Check

– Target Disk

– SMART

– SMART Status Check

• HDD Short Self-Test

– Target Disk

– Estimated Test Time

– Start Test

• HDD Extended Self-Test

– Target Disk

– Estimated Test Time

– Start Test

• set extended IDE drive on selected channel to:

• None

• Auto

• set access mode on selected channel to:

• Large

• Auto

• view:

• Firmware Version

• Capacity

• Cylinder

• Head

• Precomp

• Landing Zone

• Sector

Floppy Controller Disables/enables the floppy disk controller.

Support for specific Computer Setup options may vary depending on the hardware configuration.

www.hp.com

Computer Setup (F10) Utility Guide

Computer Setup (F10) Utility

Computer Setup (Continued)

Heading

Standard

CMOS

Features

(continued)

Option

Drive A

Halt On

Advanced

BIOS Features

POST Delay

Device Boot Disabling

Description

Allows you to set Drive A to None or

1.44M, 3.5 in. (Used to disable/enable

Drive A in legacy operating systems).

Allows you to set POST error behavior to:

• All Errors

• No Errors

• All but Keyboard

• All but Diskette

• All but Diskette/Keyboard

Allows you to set a POST delay to:

• 0 seconds

• 5 seconds

• 10 seconds

• 15 seconds

• 30 seconds

Allows you to restrict a device from booting the unit. You can disable as a bootable device:

• None

• USB

• Internal ODD

• Internal FDD

• USB + ODD + FDD

Disables/enables F9 Boot Menu.

F9 Boot Menu

Removable Device Boot Seq.

Allows you to specify the order of attached removable devices (such as Legacy Floppy or

USB FDD). The first drive in the order has priority in the boot sequence and is recognized as drive A.

Support for specific Computer Setup options may vary depending on the hardware configuration.

Computer Setup (F10) Utility Guide www.hp.com

7

8

Computer Setup (F10) Utility

Computer Setup (Continued)

Heading

Advanced

BIOS Features

(continued)

Option

Hard Disk Boot Seq.

Optical Drive Boot Seq.

Network Boot Seq.

First Boot Device

Second Boot Device

Third Boot Device

Fourth Boot Device

Description

Allows you to specify the order of attached hard drive devices (such as USB HDD storage, USB2 Drive Key, or USB flash media). The first drive in the order has priority in the boot sequence and is recognized as drive C (if any devices are attached).

Allows you to specify the order in which attached optical drives (including USB ODD) are checked for a bootable operating system image.

Allows you to specify the order in which network devices (including UP NIC cards) are checked for a bootable operating system image.

Allows you to specify which devices will boot first, second, third, and fourth or to disable any of the four:

• Removable

• Hard Disk

• Optical Drive

• Network

• Disabled

MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating system has started.

Boot Up NumLock Status Allows you to set the default NumLock status to off or on.

Security Option Allows you to set the security option to Setup or Always so that the password is required every time the system boots or only when entering Computer Setup.

Support for specific Computer Setup options may vary depending on the hardware configuration.

www.hp.com

Computer Setup (F10) Utility Guide

Computer Setup (F10) Utility

Computer Setup (Continued)

Heading

Advanced

BIOS Features

(continued)

Advanced

Chipset

Features

Option

APIC Mode

MPS Version Control for OS Allows you to set the MPS table version to:

• 1.1

• 1.4

BIOS Write Protection

Execute Disable Bit

Disables/enables BIOS upgrading.

Disables/enables Execute Disable Bit (XD) functionality, which prevents malicious buffer overflow attacks.

E.I.S.T.

Description

Disables/enables the Advanced-PIC mode.

UMA Frame Buffer

Init Display First

(VGA Setting)

SURROUNDVIEW

Disables/enables Enhanced Intel SpeedStep

Technology, which reduces processor power consumption.

Select the UMA (Unified Memory

Architecture) frame buffer size:

• 32MB

• 64MB

• 128MB

• Auto

Allows you to select the primary display device:

• PCI Slot

• OnChipVGA

• PCIEx

Disables/enables SURROUNDVIEW

(available when an ATI PCIEx video card is installed).

Auto Detect PCI Clk

(VGA Setting)

Disables/enables PCI clock auto-detection.

Support for specific Computer Setup options may vary depending on the hardware configuration.

Computer Setup (F10) Utility Guide www.hp.com

9

Computer Setup (F10) Utility

Computer Setup (Continued)

Heading

Integrated

Peripherals

Option

Onboard HD Audio

OnChip USB Controller

USB Legacy Support

Onboard LAN

Onboard LAN Boot ROM

Onboard Serial Port

Onboard Parallel Port

Description

Disables/enables onboard HD audio.

Disables/enables USB controller.

Disables/enables USB legacy support function (USB keyboard, USB mouse, and

DiskOnKey).

Disables/enables onboard LAN controller.

Disables/enables the boot ROM of the onboard LAN chip.

Allows you to select a setting for the onboard serial port:

• Disabled

• 3F8/IRQ4

• 2F8/IRQ3

• 3E8/IRQ4

• 2E8/IRQ3

Allows you to select a setting for the onboard parallel port:

• Disabled

• 378/IRQ7

• 278/IRQ5

• 3BC/IRQ7

Parallel Port Mode Allows you to select parallel port mode:

• SPP

• EPP

• ECP

• ECP+EPP

• Normal

Support for specific Computer Setup options may vary depending on the hardware configuration.

10 www.hp.com

Computer Setup (F10) Utility Guide

Computer Setup (F10) Utility

Computer Setup (Continued)

Heading

Integrated

Peripherals

(continued)

Power

Management

Setup

Option

ECP Mode Use DMA

ACPI Suspend Type

Description

If Parallel Port Mode is set to ECP or

ECP+EPP, allows you to set the DMA channel for ECP Mode to 1 or 3.

After AC Power Loss

Allows you to set type of ACPI sleep mode:

• S1 (Power On Suspend)

• S3 (Suspend To RAM)

• S1 & S3

Allows you to select system power loss behavior:

• On

• Off

• Last State

Disables/enables wake-up modem from S5.

External Modem S5

Wake-Up

RTC Alarm Resume

Date (of Month)

Resume Time (hh:mm:ss)

Disables/enables RTC alarm.

If RTC Alarm Resume is enabled, allows you to select the day of the month for resumption of RTC alarm. (Set to 0 for every day.)

If RTC Alarm Resume is enabled, allows you to select what time the RTC alarm will resume.

PnP/PCI

Configurations

Reset Configuration Data Disables/enables automatic reconfiguration.

The default is Disabled. Select Enabled to reset Extended System Configuration Data

(ESCD) when you exit Setup, if you have installed a new add-on and the system reconfiguration has caused such a serious conflict that the OS cannot boot.

Support for specific Computer Setup options may vary depending on the hardware configuration.

Computer Setup (F10) Utility Guide www.hp.com

11

Computer Setup (F10) Utility

Computer Setup (Continued)

Heading

PnP/PCI

Configurations

(continued)

Option

Resources Controlled By

IRQ Resources

• IRQ-3 assigned to

• IRQ-4 assigned to

• IRQ-5 assigned to

• IRQ-7 assigned to

• IRQ-10 assigned to

• IRQ-11assigned to

• IRQ-14 assigned to

• IRQ-15 assigned to

Description

Allows you to select whether resources are controlled automatically or manually:

• Auto (ESCD–Extended Storage

Configuration Data)

• Manual

BIOS can automatically configure all the bootable and Plug-and-Play-compatible devices. If you choose Auto, you cannot select IRQ, DMA and memory base address fields since BIOS automatically assigns them.

When resources are controlled manually, allows you to assign each system interrupt a type, depending on the type of device using the interrupt.

Legacy ISA for devices compliant with the original PC AT bus specification, PCI/ISA

PnP for devices compliant with the

Plug-and-Play standard whether designed for

PCI or ISA bus architecture.

Maximum Payload Size Allows you to set TLP payload size for the PCI

Express Devices to (in bytes):

• 128

• 256

• 512

• 1024

• 2048

• 4096

Support for specific Computer Setup options may vary depending on the hardware configuration.

12 www.hp.com

Computer Setup (F10) Utility Guide

Computer Setup (F10) Utility

Computer Setup (Continued)

Heading

PC Health

Status

Option

System Fan Fail Check

Description

Disables/enables system fan detection during POST.

Smart Fan Function

Current CPU Temperature

Disables/enables smart fan functionality.

(view only)

Current System Temperature (view only)

Current CPU Fan Speed (view only)

Current System Fan Speed

Vcore

+12V

VCC5

+3.3V

VBAT (V)

3VSB (V)

(view only)

(view only)

(view only)

(view only)

(view only)

(view only)

(view only)

Allows you to reset Computer Setup to factory defaults.

Load

Optimized

Defaults

Set Supervisor

Password

Set User

Password

Save & Exit

Setup

Allows you to establish a password to control access to Computer Setup.

Allows you to establish a password to control access to the computer. (Supervisor password must be set before you can set a

User password.)

Allows you to save current settings and exit

Computer Setup.

Exit Without

Saving

Allows you to exit Computer Setup without saving changes.

Support for specific Computer Setup options may vary depending on the hardware configuration.

Computer Setup (F10) Utility Guide www.hp.com

13

Computer Setup (F10) Utility

Recovering the Configuration Settings

Recovering the configuration settings established in the Computer

Setup (F10) Utility requires that you first back up the settings before a recovery is needed.

The CMOS Save/Load utility can be found at http://www.hp.com

under the Software & Driver Downloads for your specific model.

Download the firmware files into a folder on a removable storage device. It is recommended that you save any modified computer configuration settings to a diskette, a USB flash media device, or a diskette-like device (a storage device set to emulate a diskette drive) and save the diskette or device for possible future use.

Backing up the CMOS

1. Make sure the computer to be backed up is turned on. Connect the removable storage to the computer.

2. Boot to DOS.

3. Type N:\folder\BIOS.exe SAVE:ABC001.DAT (where N is the drive letter of the removable storage) to save the CMOS setting to the removable storage device.

Restoring the CMOS

1. Make sure the target computer is turned on. Connect the removable storage to the target computer.

2. Boot to DOS.

3. Type N:\folder\BIOS.exe LOAD:ABC001.DAT (where N is the drive letter of the removable storage) to load the custom CMOS setting onto the target system.

14 www.hp.com

Computer Setup (F10) Utility Guide

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement

Table of contents