Mitus - Powersound
Professional audio equiPment
FBT Elettronica SpA
62019 Recanati (MC) - Italy
Tel: +39 071 750591
Fax: +39 071 7505920
info@fbt.it - www.fbt.it
(International Headquarter - Factory)
FBT Audio (UK) Ltd
South Croydon, Surrey, UK
Tel: 0844 310 4592
Fax: 0844 310 4594
info@fbtaudio.co.uk
www.fbtaudio.co.uk
FBT USA, Inc.
Palm Coast, Florida, US
Tel: 800 333 9383
fbtusa@sbcglobal.net
general catalogue 2012•2013
English
Distributed by
La FBT Elettronica S.p.a.
si riserva il diritto di apportare modifiche tecniche
ed estetiche senza obbligo di preavviso.
I marchi ALPSTM, B&C e NeutrikTM appartengono
alle rispettive aziende.
Grafica
Studio Conti
Fotografia
Giuseppe Saluzzi
Stampa
Tecnostampa - Loreto
Finito di stampare Ottobre 2012
Mitus
5
PWM
Amplifier
Mitus
5
Verve
27
HiMaxX
43
ProMaxX
51
Vertus
15
EvoMaxX
59
Modus
21
Jolly
65
Line Array
Systems
Speaker
Systems
Class G
Amplifier
Switch Mode
Power Supply
Neodymium
Woofer
SUBLine
35
StageMaxX
39
Subwoofer
Stage Monitor
Digital
Processor
Analog
Processor
Amico
71
Tone
Controls
DLM 26
75
Lightweight
Symbol
77
Integrated
Sound Systems
Digital Loudspeaker
Management
Power
Amplifier
Floor
Monitor
Hardware for
permanent
installations
Formula
79
Accessories
85
Mixers
2
Since 1963, FBT designs and builds sound in Recanati, a small city
located in the centre of Italy, a city of Poetry, of Art, of Music - from
immemorial time the soundtrack for entire generations.
In FBT every department is a company
in the company whose aim is to make
quality within the energy of sound.
A technological know-how that extends from research to
planning, from electronics to design, from wood to metal,
from plastics to painting. A highly innovative product
and a manufacturing process determined by a strict final
electronic testing.
A strong well-established brand, a leader in modulation which goes from
loudspeakers to amplifiers, from mixers to installations of PA systems
through the distribution of Professional Audio Equipment and Audio
Contractor lines of product and of the brands Qube, Cicognani and Kempton.
Moreover big brands such as Pearl, Sabian, JTS, Crafter, Hardcase and Phonic
rely on FBT Musical Instruments Distribution for the marketing of their
products.
The energy and power of FBT sound run through Europe,
America, Africa, Asia up to Oceania, thanks to the cooperation
with highly professional branches and distributors.
History, experience and innovation in tradition.
All made in Italy.
5
Sound Reinforcement Systems
Mitus
MITUS
Sound Reinforcement Systems
A comprehensive range of both powered and
passive line arrays, 2-way speakers, subwoofers
and low profile stage monitors.
The MITUS 206LA is the flagship model of the
MITUS range. Featuring 2 x 6.5” B&C woofers
(with 1.7” high excursion voice coils) and a
B&C neodymium magnet 1.4”HF compression
driver with a 64 mm (2.5”) voice coil
and a 35 mm (1.4”) exit throat coupled to a
waveguide, the 206LA compact line array is
engineered to respect the physical criteria of the
ideal cylindrical wave source for the entire audio
range. The cabinet features 2 x 6.5” woofers
coupled to a waveguide.
Mitus 206LA
Mitus 212FSA
Mitus 218SA
Mitus 121SA
600 + 300W
1200W
2000W
1200W
Mitus 206L
Mitus 212FS
Mitus 218S
Mitus 121S
500 + 150W
1000W
4000W
2000W
The finest sound reproduction for live sound touring and permanent installations
MITUS 212FSA is a 2 x 12” compact
and flyable subwoofer, to extend the
low frequencies of the MITUS 206LA when
combined together in ground-stacked or flying
arrays.
Along with this model, the MITUS 118SA,
the new MITUS 218SA and the MITUS
121SA, respectively 18”, double 18” and 21”
subwoofers, which perfectly integrate for live
or permanent applications where rich and high
SPL bass frequencies need to be emphasized.
MITUS 115A, 112A, the new 152A and 215A
are 2-way FOH speaker systems to provide for
a wide range of applications, especially when
matched along with the MITUS subs.
With a discreet low profile enclosure design,
the MITUS 210MA is undoubtedly the most
advanced stage monitor of its type delivering
maximum high fidelity monitoring, making it an
ideal choice for all musical performances as well
as TV studio broadcasts.
• High quality B&C neodymium magnet
woofers, custom manufactured for FBT
• The latest generation of B&C compression
drivers
• High efficiency Class D power amp modules
with switch mode power supplies, fixed to
a die-cast aluminum chassis. This provides
maximum protection of the electronics
from dust, prevents air loss through the
input control panel, and it maximizes heat
dissipation. All this has allowed the realization
of a 3.2 Kg lightweight power amp module
that delivers 1200W RMS!
• DSP with A/D-D/A low noise converters
providing 8 selectable presets to customize
the sound program for various applications,
or simply to taste of the user through a setup
selection.
• Neutrik Powercon IN and LINK OUT power
connectors
• Aluminum die-cast carrying handles with
rubber inserts
• A wide range of accessories
• Heavy duty metal grille with anti-resonance
spacers and exclusive synthetic cloth to
protect the drivers from dust and moisture,
without modifying the acoustic fidelity. Unlike
widely used conventional foam linings, our
FBT synthetic cloth will not break down or
disintegrate over time.
The MITUS 206 LA is a truly innovative
line array speaker system enriched by FBT’s
highly skilled engineering and technological
advancements such as power, performance,
weight, flexibility and ease of use. These are
the credentials of this new line array, advancing
the concept of line arrays in terms of power,
performance, weight, flexibility and ease of use.
The modularity of the MITUS 206 LA, makes it
extremely flexible for a wide range of applications,
from a small 2 cabinet P.A. system to an elaborate
line array system consisting of up to 12 MITUS
Mitus 210MA
Mitus 215A
Mitus 152A
Mitus 115A
Mitus 112A
1200W
600 + 300W
1100 + 250W
1100 + 250W 600 + 300W
600 + 300W
Mitus 118S
Mitus 210M
Mitus 215
Mitus 152
Mitus 115
Mitus 112
1000W
800W
1600W
800W
800W
700W
Mitus
Sound Reinforcement Systems
Mitus 118SA
7
Superb sound fidelity for the best performance with a low profile enclosure design
206LA cabinets along with multiple MITUS 212FSA
subs for large concert events. The waveguide,
optimized by BEM finite element simulation,
offers 100° horizontal dispersion.
The MITUS 206 LA cabinets coupling hardware is
internally integrated and allows the suspension
of 12 arrays with a 10:1 safety factor. The
cabinets can be easily angled from 0° to 10°,
adjustable in 2° steps by simple pin adjustments
on the cabinets’ integrated fly ware. The Class
D (PWM) amplifier module with switch mode
power supply provides 600W RMS LF+300W
RMS HF. The amp module is contained inside an
aluminum die-cast chassis, which also acts as
the framework for suspending the system and
angle adjustment inclination of the cabinets.
The digital signal processor has 8 selectable
equalization presets making the MITUS 206LA
configurable according to the array curve and
the number of speaker units utilized. To increase
low frequency SPL, the MITUS 212FSA active
subwoofer is a perfect match for use with
MITUS 206LA line arrays. It can be used along
with the other ground stackable subwoofers in
the MITUS Series, the MITUS 218SA, 118SA
and 121SA. For such applications these subs
feature an “INFRA” mode preset. Through the
use of the FBT aiming software program for PC
it is possible to simulate the SPL distribution and
frequency response of the listening area.
MT-F 212
Mitus 206LA
Mitus 206LA
Mitus 206LA
MT-F206
Mitus 212FSA
MT-J206
MT-S206
Mitus 212FSA
MT-B206
Mitus 121SA
MT-B206
Mitus 206LA
Mitus 206LA
MT-F206
Flying Bar
MITUS 206LA/L
MT-S206
Cluster bracket for 2
Mitus 206 LA mounted
on Mitus 212 FSA
MT-J206
Joint Bar
MITUS 212FSA/FS
with 206LA/L
MT-F212
Flying Bar
MITUS 212FSA/FS
MT-B206
Metal Base to ground
206LA array or stack
on 118SA/S or 121SA/S
Mitus 206LA
Mitus 206L
Precision coverage vertical active array
600W + 300W RMS - 134dB SPL
Precision coverage vertical passive array
500W + 150W RMS 16ohm
129dB SPL LF/133dB SPL HF
• 2 x 165 mm (6.5’’) B&C neodymium
woofers with 44 mm (1.7’’) coil
• 36 mm (1.4’’) exit B&C neodymium driver
with 64 mm (2.5’’) coil
• Frequency response from 68Hz to 20kHz
• Latest class D built-in amplifiers, 600W RMS
to the LF and 300W RMS to the HF with
switch mode power supply
• DSP on-board with 8 EQ presets, +/- 5db
HF level control for accurate amplitude
shading
• Control panel with XLR input and link,
volume, presets, HF level, HP-filter, ground-lift
• 100° horizontal waveguide with very low
distortion and near flat wavefront up to
18Khz
• High impact polypropylene gas-injected
enclosure with integrated rigging hardware
adjustable with 0° to 10° angle between
cabinets at 2° step
• Ideal for small to medium sized application,
from single pole mounted loudspeakers with
100°H x 10°V coverage to multiple cabinet full
sized line array, the MITUS 206LA maybe used
also in outdoor applications where the system
is not directly exposed to the elements
• Wide range of hardware accessories for flying
and ground stacked configurations
• Very lightweight, only 30.8 Lb
• Internal HF protection
• Neutrik Speakon NL- 4MDV connectors
IN & LINK OUT
• External digital processor required
MITUS Series
is also available
in white colour
Sound Reinforcement Systems
Mitus 212FSA
• Compact subwoofer in vented band pass
design sharing the same width and hardware
suspension of the MITUS 206LA
• 320 mm (2 x 12’’) B&C neodymium magnet
high excursion subwoofers with 75 mm (3’’)
voice coils
• Frequency Response from 45Hz to 120Hz
• Class D amplifier delivering 1200W RMS
• Switch mode power supply
• DSP with 8 EQ presets, cardioid and infra
configurations, delay
• Control panel with XLR input and link,
volume, presets, delay, phase 0°-180°,
ground-lift
• 15 mm (5/8’’) birch plywood enclosure,
scratch resistant black textured paint
• Low frequency extension cabinet for the
MITUS 206LA line array for flying or ground
stacked configurations.
• M20 top mount stand socket
Mitus 212FS
Flyable Passive Subwoofer
1000W/8ohm -138dB SPL
• Neutrik Speakon NL- 4MDV connectors
IN & LINK OUT
• External digital processor required
Mitus
Processed Flyable Active Subwoofer
1200W RMS - 138dB SPL
9
Active Mitus Sub
Perfect low-frequency
extension for the
MITUS range and an
ideal companion for
the MITUS 206LA
line array for ground
stack applications with
optional MTB206 metal
base
M20 top mount stand
socket
Optional 4 swivelmount casters 80 mm
(3.15’’) on request
Passive Mitus Sub
Control panel with XLR
input and link, volume,
presets, delay, phase 0°180°, ground lift
Neutrik Speakon
NL - 4MDV connectors
IN & LINK OUT
External digital
processor required:
FBT DLM26 Digital
Loudspeaker
Management
Mitus 218SA
Mitus 121SA
Processed Active Subwoofer
2000W RMS - 145dB SPL
Processed Active Subwoofer
1200W RMS - 137dB SPL
• Large vented bass-reflex subwoofer
• 2 x 460 mm (18’’) custom B&C neodymium
high excursion subwoofers with 100 mm
(3.9’’) coil
• Frequency Response from 30Hz to 100Hz
• Class D amplifiers delivering 2000W RMS
with switch mode power supply
• DSP with 6 EQ presets, cardioids and infra
configurations, delay
• 18 mm (3/4’’) birch plywood enclosure,
textured scratch resistant black paint
• Six FBT design aluminum handles
• Large vented bass-reflex subwoofer,
extremely deep low frequency extension
• 530 mm (21’’) custom B&C neodymium
high excursion subwoofers with 115 mm
(4.5’’) coil
• Frequency response from 29Hz to 100Hz
• Class D amplifiers delivering 1200W RMS
with switch mode power supply
• DSP with 8 EQ presets, cardioids and infra
configurations, delay
• 18 mm (3/4’’) birch plywood enclosure with
large reflex vent free from turbulence, scratch
resistant black paint
• Six FBT design aluminum handles
Mitus 218S
Mitus 121S
Passive Subwoofer
4000W/4ohm - 147dB SPL
Passive Subwoofer
2000W/4ohm - 139dB SPL
Processed Active Subwoofer
1200W RMS - 139dB SPL
Processed Active Stage Monitor
600W + 300W RMS - 134dB SPL
• Compact vented band pass subwoofer
design enclosure
• 460 mm (18’’) custom B&C neodymium
magnet high excursion woofer with 75 mm
(3’’) voice coil
• Frequency response from 36Hz to 100Hz
• Class D amplifier delivering 1200W RMS with
switch mode power supply
• DSP with 8 presets, cardioids and infra
configurations, delay
• 18 mm (3/4’’) birch plywood enclosure,
scratch resistant black textured paint
• Eight M10 fly points and two FBT design
aluminum handles
• 2-way bi-amplified, bass-reflex design with
coaxial HF compression driver
• 2 x 250 mm (2 x 10’’) B&C custom
neodymium magnet speakers with 64 mm
(2.5’’) voice coil, one of them is coaxial with
36 mm (1.4’’) exit titanium compression
driver and 64 mm (2.5’’) voice coil
• Frequency response from 60Hz to 20kHz
• Class D built-in amplifiers, 600W RMS to the
LF and 300W RMS to the HF with switch
mode power supply
• DSP with 8 EQ presets
• Control panel with XLR input and link,
volume, presets, HP-filter, ground-lift
• 70° conical dispersion
• 15 mm (5/8”) birch plywood enclosure,
scratch resistant black textured paint finish
• 35 mm (1.38’’) stand socket and back side
carrying handle
• Ideal for live sound stage monitoring
applications, as well as a front of house main
PA speaker
• Very lightweight, only 41.9 Lb
Mitus 118S
Passive Subwoofer
1000W/4ohm - 139dB SPL
Sound Reinforcement Systems
Mitus 210MA
Mitus 210M
Passive Stage Monitor
800W/8ohm- 132dB SPL
• Passive version, recommended amplifier
of 800W RMS / 8ohm
• Hi-grade passive internal crossover featuring
“soft-trip” circuitry protection of LF and HF
drivers
Mitus
Mitus 118SA
11
Active Mitus Speakers
2-way, bi-amplified,
bass-reflex design
Switch mode power
supply
DSP with 8 EQ presets
Birch plywood
enclosure, scratch
resistant black paint
finish
Control panel with XLR
input and link, volume,
presets, HP filter,
ground-lift
12 x M10 fly points
and two FBT design
aluminium handles
Passive Mitus Speakers
Ideal for live sound
reinforcement
applications and
permanent installations
Hi-grade passive
internal crossover
featuring “soft-trip”
circuitry protection of LF
and HF transducers
Speakon NL - 4MDV
connectors IN & LINK
OUT
Mitus 215A
Mitus 152A
Processed Active Speaker
1100W + 250W RMS - 136dB SPL
Processed Active Speaker
1100W + 250W RMS - 136dB SPL
• 2 x 380 mm (15”) B&C neodymium
magnet woofer with 75 mm (3”) voice coil
• 50 mm (2”) exit B&C HF driver with 64 mm
(2.5’’) voice coil
• Frequency response from 42Hz to 20kHz
• Class D built-in amplifiers, 1100W RMS to the
LF and 250W RMS Class G to the HF
• 60°H x 40°V rotatable HF horn
• 380 mm (15”) B&C neodymium magnet
woofer with 75 mm (3”) voice coil
• 50 mm (2”) exit B&C HF driver with 64 mm
(2.5’’) voice coil
• Frequency response from 45Hz to 20kHz
• Class D built-in amplifiers, 1100W RMS
to the LF and 250W RMS Class G to the HF
• 60°H x 40°V rotatable HF horn
• 35 mm (1.38’’) speaker stand socket
• Very lightweight
Mitus 215
Passive reinforcement speaker
1600W/4ohm - 138dB SPL
Mitus 152
Passive reinforcement speaker
800W/8ohm - 132dB SPL
Sound Reinforcement Systems
Mitus 112A
Processed Active Speaker
600W + 300W RMS - 133dB SPL
Processed Active Speaker
600W + 300W RMS - 133dB SPL
• 380 mm (15”) B&C neodymium magnet
woofer with 75 mm (3”) voice coil
• 25 mm (1”) exit B&C neodymium magnet HF
driver with 44 mm (1.7’’) voice coil
• Class D built-in amplifiers, 600W RMS to the
LF and 300W RMS to the HF, switch mode
power supply
• Frequency response from 46Hz to 20kHz
• 80°H x 50°V rotatable HF horn
• Very lightweight, only 28Kg
• 35 mm (1.38’’) speaker stand socket
• 320 mm (12’’) B&C neodymium magnet
woofer with 75 mm (3’’) voice coil
• 25 mm (1’’) exit B&C neodymium magnet HF
driver with 44 mm (1.7’’) voice coil
• Class D amplifiers, 600W RMS to the LF and
300W RMS to the HF, switch mode power
supply
• Frequency response from 50Hz to 20kHz
• 80°H x 50°V rotatable HF horn
• Very lightweight, only 20Kg
• 35 mm (1.38’’) speaker stand socket
Mitus 115
Mitus 112
Passive reinforcement speaker
800W/8ohm - 132dB SPL
Passive reinforcement speaker
700W/8ohm - 131dB SPL
Mitus
Mitus 115A
13
Model
Configuration
way 2
212FSA
218SA
121SA
118SA
210MA
215A
152A
115A
112A
1
1
1
1
2
2
2
2
2
Built-in amplif. cont. LF/HF
W RMS 400/200
800
1600
800
800
400/200
700/200
700/200
400/200
400/200
Built-in amplif. max. LF/HF
W RMS 600/300
1200
2000
1200
1200
600/300
1100/250
1100/250
600/300
600/300
2400
4000
2400
2400
1200/600
2200/500
2200/500
1200/600
1200/600
Built-in amplif. max. peak LF/HF
Frequency response
W 1200/600
@-6dB 68Hz - 20KHz 45Hz - 120Hz 30Hz - 100Hz 29Hz - 100Hz 36Hz - 100Hz 60Hz -20KHz 42Hz - 20KHz 45Hz - 20KHz 46Hz - 20KHz 50Hz - 20KHz
Low frequency woofer
2x6.5 - 1.7 coil 2 x 12 - 3 coil
inch neodymium neodymium 2x18- 4 coil
1x21 - 4.5 coil 1x18- 3 coil neodymium neodymium
High frequency driver
1 x 1.4 - 2.5 coil
inch neodymium -
-
-
-
1 x 1.4 - 2.5 coil neodymium-coax
1 x 2 - 2.5 coil 1 x 2 - 2.5 coil 1 x 1 - 1.7 coil 1 x 1 - 1.7 coil
139 / 145
half-space
133 / 137
half-space
135 / 139
half-space
127 / 134
133 / 136
129 / 136
127 / 133
126 / 133
omnidirectional omnidirectional omnidirectional omnidirectional
70° - conical
60° x 40°
60° x 40°
80° x 50°
80° x 50°
Maximum SPL cont/peak
Mitus
ProMaxX
206LA
dB 125 / 134
Dispersion
100° x 10° max
H x V dependant upon
n° of element
Input impedance
kOhm 22
Crossover frequency
AC Power requirements
kHz 1.2
VA 640
Input connectors
Power cord
Net dimensions (WxHxD)
Net weight
Transport dimensions
(WxHxD)
Transport weight
134 / 138
half-space
2x10 - 2.5 coil 2x15 - 3 coil
neodymium neodymium
1x15 - 3 coil
neodymium
1x15 - 3 coil
neodymium
1x12 - 3 coil
neodymium
22
22
22
22
22
22
22
22
22
preset
dependant
preset
dependant
preset
dependant
preset
dependant
1.2
1.2
1.2
1.5
1.5
640
1500
640
640
640
800
800
640
640
XLR with loop XLR with loop XLR with loop XLR with loop XLR with loop XLR with loop XLR with loop XLR with loop XLR with loop XLR with loop
m / ft 5 / 16.4
mm 574x220x383
inch 22.6x8.7x15.1
Kg/Lb 14 / 30.8
5 / 16.4
5 / 16.4
5 / 16.4
574x420x660
22.6x16.5x26
1000x594x730
39.4x23.4x28.7
590x780x760 574x594x730 574x290x402 493x1245x471 425x805x421 425x750x421 380x660x380
23.2x30.7x29.9 22.6x23.4x28.7 22.6x11.4x15.8 19.04x49x18.5 16.7x31.7x16.6 16.7x29.5x16.6 15x26x15
5 / 16.4
36.5 / 80.5
90 /198.41
58 / 127.8
47 / 103.6
5 / 16.4
19 / 41.9
5 / 16.4
5 / 16.4
52.5 / 115.74 36.5 / 80.46
mm 655x455x280 780x710x520 1150x 740x900 805x650x930 460x775x765 890x390x510 618x1355x610 550x915x560
inch 25.8x17.9x11 30.7x28x20.5 45.2x29x35.4 31.7x25.6x36.6 18.1x30.5x30.1 35x15.4x20.1 24.3x53.3x24 21.6x36x22
Kg/Lb 15.7 / 34.6
5 / 16.4
28 / 61.7
5 / 16.4
20 / 45
550x560x860 485x495x750
21.7x22.1x33.9 19.1x19.5x29.5
41 / 90.4
102 / 224.87 66.5 / 146.6
56.2 / 123.9
21.1 / 46.5
58 / 127.86
58 / 127.86
40 / 88.18
22 / 48.5
212FS
218S
121S
118S
210M
215
152
115
112
1
14
Model
Configuration
Recommended amplifier
Long term power
Short term power IEC 268-5
Nominal impedance
Frequency response
206L
way 2
1 reflex
1 reflex
1 band-pass
2
2
2
2
2
W RMS 500LF / 150HF 1000
4000
2000
1000
800
1600
800
800
700
W 250LF / 70HF 500
2000
1000
500
400
800
400
400
350
2800
1400
1400
1200
W 1000LF / 300HF 2000
Ohm 16LF / 16HF
8
8000
3600
2000
1600
4
4
4
8 (8 LF/8 HF) 4 (4 LF/8 HF) 8 (8 LF/8 HF) 8 (8 LF/8 HF) 8 (8 LF/8 HF)
@-6dB 75Hz - 20KHz 50Hz - 120Hz 30Hz - 250Hz 29Hz - 250Hz 36Hz - 400Hz 65Hz - 20KHz 47Hz - 20KHz 47Hz - 20KHz 50Hz - 18KHz 55Hz - 18KHz
Low frequency woofer
inch
2x6.5 - 1.7 coil 2 x 12 - 3 coil
neodymium neodymium
2x18 - 4 coil
1x21 - 4.5 coil 1x18- 3 coil
neodymium neodymium
2x10 - 2.5 coil 2x15 - 3 coil
neodymium neodymium
High frequency driver
inch
1 x 1.4 - 2.5 coil
neodymium
-
-
-
1 x 1.4 - 2.5 coil 1 x 2 - 2.5 coil 1 x 2 - 2.5 coil 1 x 1 - 1.7 coil 1 x 1 - 1.7 coil
-
1x15 - 3 coil
neodymium
1x15 - 3 coil
neodymium
1x12 - 3 coil
neodymium
Sensitivity (@1W/1m)
dB 97LF / 108HF
99
102
99
101
100
103
100
100
99
Maximum SPL cont/peak
(Bi-Amp)
125/129LF dB
129/133HF
134/138
half-space
141 / 147
half-space
136 / 139
half-space
136 / 139
half-space
128 / 132
134 / 138
128 / 132
128 / 132
127 / 131
omnidirectional omnidirectional omnidirectional 70° conical
60° x 40°
60° x 40°
80° x 50°
80° x 50°
1.2
1.6
1.6
Dispersion
100° x 10° max
H x V dependant upon omnidirectional
n° of element
external
active
external
active
external
active
external
active
external
active
1.3
1.2
Recommended HP filter
65hz - 24dboct
40hz - 24dboct
25hz - 24dboct
25hz - 24dboct
32hz - 24dboct
50hz - 24dboct
40hz - 24dboct 40hz - 24dboct 40hz - 24dboct
40hz - 24dboct
Recommended external
filter
Digital
Digital
Digital
Digital
Digital
management
management
management
management
management
with FBT presets with FBT presets with FBT presets with FBT presets with FBT presets
-
-
Input connectors
2 x Speakon
2 x Speakon
2 x Speakon
2 x Speakon
2 x Speakon
2 x Speakon
2 x Speakon
2 x Speakon
2 x Speakon
2 x Speakon
NL4 in & throu NL4 in & throu NL4 in & throu NL4 in & throu NL4 in & throu NL4 in & throu NL4 in & throu NL4 in & throu NL4 in & throu NL4 in & throu
Crossover frequency
Net dimensions (WxHxD)
Net weight
Transport dimensions
(WxHxD)
Transport weight
kHz
mm 574x220x383 574x420x660
inch 22.6x8.7x15.1 22.6x16.5x26
Kg / Lb 13.5 / 29.8
35 / 77.2
-
1000x594x730 590x780x760 574x594x730 574x290x402 493x1245x471 425x805x421 425x750x421 380x660x380
39.4x23.4x28.7 23.2x30.7x29.9 22.6x23.4x28.7 22.6x11.4x15.8 19.04x49x18.5 16.7x31.7x16.6 16.7x29.5x16.6 15x26x15
87 / 191.8
56 / 123.5
45 / 99.2
17 / 37.5
48 / 105.82
32 / 70.54
mm 655x455x280 780x710x520 1150x740x900 805x650x930 460x775x765 890x390x510 618x1355x610 550x915x560
inch 25.8x17.9x11 30.7x28x20.5 45.2x29x35.4 31.7x25.6x36.6 18.1x30.5x30.1 35x15.4x20.1 24.3x53.3x24 21.6x36x22
Kg / Lb 15.2 / 33.5
39.5 / 87
-
99 / 218.25
64.5 / 142.2
54.2 / 119.5
19.1 / 42.1
26 / 57.3
18 / 39.7
550x560x860 485x495x750
21.7x22.1x33.9 19.1x19.5x29.5
53.5 / 117.94 35.5 / 78.26 28.5 / 62.8
20 / 44.1
15
Line Array Systems
Vertus
Professional
Line Array
Vertus
Line Array Systems
VERTUS CLA was created with the thought
of integrating professional line array
technology in an extremely compact and
elegant speaker column.
Compared to the traditional two-way speakers,
the sound is distributed much more evenly
throughout the audience, both in outdoor
and in indoor environments acoustically difficult
or reverberating as well. The CLA cylindrical
wave front boasts the pleasant effect of present
and precise forwardly projected sound. Even
acoustic feedback towards microphones is
reduced.
VERTUS CLA is a light and compact modular
line array system created for both live and fixed
installations, comprised by two products:
- CLA 604A: bi-amp two-way active column
speakers 400 + 100W RMS
- CLA 208SA: active subwoofer 600W RMS
CLA 208SA is a 2 x 8” active subwoofer in
bass-reflex design and birch ply enclosure. The
internal Class D amplifier delivers 600W and
is matched with a switch mode power supply
and a DSP processor with filtering functions,
equalization and speaker protection. Created
with the idea of extending the CLA608A’s
low frequency performance in live
applications, the CLA208SA serves as the base
support for the CLA604A column speaker which
can either be frontally mounted to the sub, as
well as fixed upon the optional stand through
the M20 socket on the upside of the sub.
The CLA208SA subwoofers are modular as well,
and they can be stacked to enlarge and increase
the maximum SPL.
Vertus CLA 604A
400+100W
Vertus CLA 208SA
600W
CLA604A is an extruded aluminum
column speaker fitted with 6 x 4” custom
woofers and 4 x 1” dome tweeters, each
coupled to a wave guide. The internal Class D
amplification, 400W for woofers and 100W
for tweeters with switch mode power supply
and DSP processor with 4 equalization
presets provide unexpected dynamics in a
system of these dimensions.
The rapid latching system with pins allows
for the expansion of the system, doublingup CLA608A modules to form a unified
column with an absolute and coherent source
integration and increase of SPL and lowfrequency directivity control.
16
CLA 604A
2 x CLA 604A
3 x CLA 604A
2 x CLA 604A
CLA 604A
2 x CLA 604A
CLA 604A W
3 x CLA 604A
VT-SC 59
3 x CLA 208SA
2 x CLA 208SA
CLA 208SA
2 x CLA 208SA
VT-SC 114 W
CLA 208SA W
CLA system features:
• High-level sound quality from 50Hz
to 20kHz expressly developed for live
performance
• Long distance sound projection and better
SPL distribution towards the audience
• Great and dynamic power performance
thanks to tri-amplification system
• Lightweight and easy to carry
• Design and elegance for an easy integration
even in the most demanding installations
• Very compact dimensions enable the
listener to concentrate on sound and not on
speakers!
• High horizontal dispersion
The internal XLR signal link system and Neutrik
POWERCONN power supply on both the sub
and the satellite, allows for hiding wires
and cables from open sight, preserving the
system’s clean aesthetics.
Vertus
Line Array Systems
VERTUS CLA is a true professional line array
system that can satisfy the musician looking for
a compact PA solution, easily to carry, modular,
ready to use in just minutes with no-compromise
quality. It is capable of being integrated
into any environment or installation
requiring high-quality sound and controlled
directional characteristics.
The technology and quality of a professional line array in a compact column
Vertus
is also
available
in white
colour.
17
Vertus CLA 604A
Column Active Line Array
400W + 100W RMS - 125dB SPL
• 2-way bi-amplified Line Array Column
• 6 x 100 mm (4”) custom woofer with
25 mm (1”) voice coil
• 4 x 25 mm (1”) neodymium dome tweeter
on waveguide
• 130Hz to 20KHz frequency response
• Class D 400W RMS amplifier for LF and
100W RMS for HF with switch mode power
supply
• DSP processor with 4 available equalization
presets
• Control panel with volume, presets, HP filter,
Mic-Line, status LED
• XLR input and Neutrik POWERCONN supply
input at the lower part of the column; XLR
link and Neutrik POWERCONN loop output
at the higher part, in order to hide each
connection cable
• 100°H x 20°V dispersion
• Extruded-aluminum power coated
cabinets. Superior latching system enables
the extension of the length of the line array
by adding CLA604A modules for increased
modularity of the system
• Possibility to angle the columns of +/- 30°
on a horizontal plane
• Ideal for both live applications, assisted by the
CLA 208SA active subwoofer, as well as for
fixed installation
• Easily expandable for a total power of
6600W (stereo system composed
of 3 x CLA604A and 3 x CLA208SA)
• Very light and easy to carry
Vertus CLA 208SA
Vertus
• Active subwoofer in bass-reflex design
• 2 x 200 mm (8”) custom neodymium,
high-excursion woofer with 50 mm (2”)
voice coil
• 50Hz to 180Hz frequency response
• Class D 600W RMS amplifier with switch
mode power supply
• DSP processor with 4 available presets
• Control panel with combo XLR/Jack stereo
input and link, XLR Hi-pass out stereo,
volume, presets, 0°-180° phase switch,
status LED
• Neutrik POWERCONN input and link
• 15 mm birch plywood enclosure with
anti-scratch paint finish, stackable
• M20 stand adapter, 2 integrated handles,
front hardware to sustain CLA604A modules
• Extruded - aluminum power coated cabinets.
Superior latching system enables the
extension of the length of the line array by
adding CLA604A modules for increased
modularity of the system
Line Array Systems
Processed Active Subwoofer
600W RMS - 129dB SPL
19
Model
CLA604a
Configuration
way 2
1
Built-in amplifier cont. LF/HF
W RMS 350/80
400
Built-in amplifier max. LF/HF
W RMS 400/100
600
Built-in amplifier max. peak LF/HF
Frequency response
W 800/200
1200
@-6dB 130Hz - 20KHz
50Hz - 180Hz
Low frequency woofer
inch 6 x 4” - 1” coil
2 x 8” - 2” coil
High frequency driver
inch 4 x 1” - 1” coil
-
Maximum SPL cont/peak
Dispersion
dB 122 / 125
125 / 129 half space
H x V 100° x 20°
Input impedance
Crossover frequency
AC Power requirements
Input connectors
Vertus
ProMaxX
CLA208Sa
Power cord
Omnidirectional
kOhm 22
22
kHz 2.5
0.15
VA 450
450
XLR with loop
stereo XLR with loop/HP out
m / ft 5 / 16.4
Net dimensions (WxHxD)
Net weight
5 / 16.4
mm 130x841x130
inch 5.12x33.1x5.12
550x270x500
21.7x10.6x19.7
Kg/Lb 9 / 19.84
Transport dimensions (WxHxD)
Transport weight
20 / 44.09
mm 220x930x220
inch 8.66x36.61x8.66
690x370x625
27.16x14.56x24.60
Kg/Lb 11.5 / 25.35
23.5 / 51.80
20
VT-W604
VT-S604
VT-DS 604
KMS 220
KMS 220
21
Line Array Systems
Modus
An innovative Line
Array System
Modus
Line Array Systems
MODUS. Conceived to offer all the advantages of the very latest
“true full-range array” to an increasingly vast number of users,
groups together four modules per vertical array in a single box with
vertical and horizontal dispersion angles controlled and already
optimized to solve effectively the most varied sound reinforcement
requirements, from touring to permanent installations.
The system, available in passive and powered versions, is composed
of two line-array enclosures (MODUS 15, MODUS 40) and one bandpass subwoofer (MODUS SUB), all flyable thanks to the user friendly
built-in hardware manufactured with the highest safety standards. The
two array modules offer coverage patterns 90°Hx40°V and 90°Hx15°V
dispersion angles, which can be used alone or in pairs to form a “J”
array capable of covering a 90°H x 55°V angle. The SUB can be either
be suspended or stacked and is a complement to the System to provide
extended low frequency SPL when required.
22
• Custom neodymium woofers and
drivers with high BxL factor and high linear
excursion
• 8 different configurations allowed by a
complete range of optional accessories for
transport, suspension and ground stacking
• Optional wheel trolley and casters facilitate
quick load ins and load outs
• 13 layer (18 mm/0.7”) birch plywood
enclosure with textured scratch resistant
paint finish with integrated handles and
mechanical hardware for suspension
• The lack of breaks in the source of the midhigh frequencies (inevitable in multi-box
arrays) and the definition at the design stage
of the vertical coverage angle, enable to
improve emission uniformity and coherence
• The waveguide, designed to create a
coherent cylindrical acoustic front, is free of
multiple sound paths, ensuring a naturalsounding emission that is hard to find in competitors’ systems
• Performance comparable to high-end touring line-arrays at an
extremely competitive cost
Modus Sub
MD-F Sub
Modus
15
Modus 40
Modus 15
Modus 40
MD-F Sat
Modus 40
MD-F Sat
Modus 15
MD-F Sat
MODUS15/40
• They can be used either individually, with
vertical dispersion of respectively 15° or 40°
or joined together, forming a J-array with a
vertical dispersion angle of 55°
• Thanks to the wide frequency response,
they can be used without a subwoofer in
application with average SPL
MODUS SUB
• The particular acoustic loading and layout
of the loudspeakers (compound push-pull
bandpass) enable to drastically reduce the
distortion and movement of the cone,
ensuring high SPL and very high reliability
APPLICATIONS
• Permanent installations in theatres, concert
halls, clubs, places of worship, conference
rooms, indoor sports arenas and stadia
• Sound reinforcement for live events: touring,
bands, orchestras, conference both indoors
and out, where uniform sound pressure level
is required over the entire listening area
Modus 15a
Modus SUBa
1400 + 700W
1400 + 700W
1400W
Modus 40
Modus 15
Modus SUB
1600W
1600W
1800W
Modus
Line Array Systems
Modus 40a
23
MODUS directs the sound. Light in price, excellent in performance
Self-powered range:
• High-efficiency amplifiers with PWM
technology
• Digital Signal Processor
• Digital delay (63.75 m in 25 cm steps)
• EQ presets (selectable according to
installation configuration)
• 24-bit/192kHz low-noise A/D and D/A
converters
• Connector panel with XLR signal input and
link, input gain, Ground lift, 2 banks of DIP
SWITCHES for delay control (63.75 m in 25 cm
steps) and a choice of various configuration
presets
Modus 40
• Power supply with Neutrik POWERCON
connectors Input and Output
Passive range Biamp or Full Range:
• Internal filters with external display of the
setting in use.
• High quality passive components
• Electronic protection circuit to limit power
peaks sent to the drivers with auto resetting
“soft-trip” thermal protection resetting
“soft-trip” thermal protection that ensures
operation even in the event of over-powering
Modus 15
MD-WB
Modus 15
Modus 40
Modus 40
Modus Sub
Modus Sub
MD-T Sub
Modus Sub
Modus Sub
MD-B
MD-B
Active Modus
2-way powered biamplified true line array,
bass reflex design,
internal Digital Signal
Processor
8 polypropylene
waveguide horns
with 90° horizontal
dispersion
On-board presets allow
different equalization
configurations, gain and
digital delay through
the rear control panel
Modus 40a
Modus 15a
Precision coverage active array
1400W + 700W RMS - 137dB SPL
Precision coverage active array
1400W + 700W RMS - 137dB SPL
• 2-way powered bi-amplified true line array
with 40° vertical dispersion
• 1400W RMS LF and 700W RMS HF Class D
(PWM) high efficiency integrated amplifier
• 8 x 200 mm (8”) custom neodymium
woofers with 50 mm voice coil (2”)
• 8 x 25 mm (1”) custom neodymium
compression drivers and 44 mm voice
coil (1.7”)
• 2-way powered bi-amplified true line array
with 15° vertical dispersion
• 1400W RMS LF and 700W RMS HF Class D
(PWM) high efficiency integrated amplifier
• 8 x 200 mm (8”) custom neodymium
woofers with 50 mm voice coil (2”)
• 8 x 25 mm (1”) custom neodymium
compression drivers and 44 mm voice
coil (1.7”)
Modus 40
Modus 15
Precision coverage passive array
1600W/2ohm LF/4ohm HF - 138dB SPL
Precision coverage passive array
1600W/2ohm LF/4ohm HF - 138dB SPL
• Dual-mode passive crossover
• NL4 speakon connectors
• External digital processor required
• Dual-mode passive crossover
• NL4 speakon connectors
• External digital processor required
Modus SUBa
Modus SUB
Passive subwoofer
1800W/4ohm - 141dB SPL
• NL4 speakon connectors
• External digital processor required
Modus
• Powered subwoofer in bandpass push-pull
configuration, internal Digital Signal Processor
• 1400W RMS Class D (PWM) high efficiency
integrated amplifier
• 2 x 380 mm(15”) custom neodymium
woofers with 100 mm (4”) voice coil
• On-board presets allow different equalization
configurations, gain and digital delay through
the rear control panel
Line Array Systems
Processed active subwoofer
1400W RMS - 140dB SPL
25
Model
Configuration
Built-in amplifiers LF/HF
Frequency response
way
W RMS
@-6dB
MODUS SUBa
2
2
Band-Pass
1400/700
1400/700
1400
58Hz - 18kHz
58Hz - 18kHz
38Hz - 90Hz
inch
8 x 8 - 2 coil - neodymium
8 x 8 - 2 coil - neodymium
2x15 - 4 coil - neodymium
High frequency driver
inch
8 x 1 - 1.7 coil - neodymium
8 x 1 - 1.7 coil - neodymium
-
Sensitivity (@1W/1m)
dB
105
105
103
Maximum SPL
dB
137
137
140 half space
Dispersion
HxV
90° x 40°
90° x 15°
omnidirectional
Input impedance
kohm
22
22
22
kHz
1.2
1.2
0.09
1400
1400
1200
XLR with loop
XLR with loop
XLR with loop
5 / 16.4
5 / 16.4
5 / 16.4
713x980x490 / 28.1x38.6x19.3
713x980x460 / 28.1x38.6x19.3
713x713x836 / 28.1x28.1x32.9
AC Power requirements
VA
Input connectors
Power cord
Modus
ProMaxX
MODUS 15a
Low frequency woofer
Crossover frequency
26
MODUS 40a
Net dimensions (WxHxD - single unit)
Net weight
m / ft
mm/inch
93 / 205.02
93 / 205.02
96 / 211.64
Transport dimensions (WxHxD - 2 units on pallet) mm/inch
Kg / Lb
750x1400x1100 / 29.5x55.1x43.3
750x1400x1100 / 29.5x55.1x43.3
920x1800x780 / 36.2x70.9x30.7
Transport weight (2 units on pallet)
210 / 462.97
210 / 462.97
215 / 473.99
MODUS 40
MODUS 15
MODUS SUB
2
2
Band-Pass
Kg / Lb
Model
Configuration
Recommended amplifier (Bi-Amp)
way
W RMS
1600 (1600 LF/400 HF)
1600 (1600 LF/400 HF)
1800
Long term power (Bi-Amp)
W
1000 (1000 LF/200 HF)
1000 (1000 LF/200 HF)
1000
Short term power IEC 268-5
(Bi-Amp)
W
3200 (3200 LF/800 HF)
3200 (3200 LF/800 HF)
3600
2 (2 LF/4 HF)
2 (2 LF/4 HF)
4
58Hz - 18kHz
58Hz - 18kHz
38Hz - 200Hz
Nominal impedance (Bi-Amp)
Frequency response
ohm
@-6dB
Low frequency woofer
inch
8 x 8 - 2 coil - neodymium
8 x 8 - 2 coil - neodymium
2x15 - 4 coil - neodymium
High frequency driver
inch
Sensitivity (@1W/1m) (Bi-Amp)
Maximum SPL (Bi-Amp)
Dispersion
Crossover frequency
8 x 1 - 1.7 coil - neodymium
8 x 1 - 1.7 coil - neodymium
-
dB
105 (105 LF/108 HF)
105 (105 LF/108 HF)
103
dB
138 (138 LF/134 HF)
138 (138 LF/134 HF)
141 half-space
90° x 40°
90° x 15°
omnidirectional
HxV
1.2
1.2
90Hz external
Recommended HP filter
40Hz - 24dBoct
40Hz - 24dBoct
32Hz - 24dBoct
Recommended external filter
-
-
LP 90Hz – 24dB/oct
Input connectors
2 x Speakon NL4 in & throu
2 x Speakon NL4 in & throu
2 x Speakon NL4 in & throu
713x980x490 / 28.07x38.58x19.29
713x980x460 / 28.07x38.58x19.29
713x713x836 / 28.07x28.07x32.91
83 / 182.98
83 / 182.98
86 / 189.59
Net dimensions (WxHxD -single unit)
Net Weight
kHz
mm/inch
Kg / Lb
Transport dimensions (WxHxD - 2 units on pallet) mm/inch
750x1400x1100 / 29.5x55.1x43.3
750x1400x1100 / 29.5x55.1x43.3
920x1800x780 / 36.2x70.9x30.7
Transport weight (2 units on pallet)
190 / 418.87
190 / 418.87
195 / 429.90
MD-F Sat
Flying bar Sat
Kg /Lb
MD-F Sub
Flying bar Sub
MD-T Sat
Trolley for
2 Modus Sat
MD-T Sub
Trolley for
2 Modus Sub
MD-B
Metal stand
base to tilt
Modus 40/15
MD-WB
Joint base to ground
stack Modus 40/15
to Modus Sub
d
27
Speaker Systems
Verve
The New Incredible
Verve Sound
Verve 212A
Verve 115A
400 + 100W
400 + 100W
Verve 212
Verve 115
800W
500W
Verve 112A
400 + 100W
Verve 112
Verve
Speaker Systems
400W
28
The new Verve Speakers Series features birch
plywood enclosures with a scratch resistant
textured paint finish, entirely ‘Made in Italy’ and
offers outstanding performance at competitive
prices.
New high efficiency PWM and very light yet
powerful class D integrated amplifiers, a new
digital signal processor with 4 EQ presets with
an extremely low noise floor.
VERVE speakers are equipped with constant
directivity rotatable horns, high efficiency
woofers and HF compression drivers, higher
quality protected crossover networks.
Available in 5 bi-amplified active, 5 passive
models and 2 coaxial bi-amplified stage
monitors.
To extend the low frequency response, VERVE
speakers can be matched with FBT SUBLine
subwoofers, available in 12’’, 15’’ e 18’’ models.
Full line of hardware accessories for permanent
installations is also available.
• 15 mm (0.59”) birch plywood scratch
resistant enclosure and internal bracing
• Bi-amplified models with high dynamic
Class D amplifiers 400W + 100W RMS to
provide a pleasant sound even at loud volume
• New ultra-light woofers custom made for FBT
with a weather resistant coating, extremely
reliable and efficient
• High efficiency switch mode power
supply
• Advanced filter algorithms including dynamic
equalization at low frequencies and advanced
energy control to allow high SPL while always
granting reliable and distortion-free audio
reproduction
• An increase in total SPL thanks to FBT’s
new digital limiter algorithms and increased
amplifier power output
• Passive models: soft-trip high-frequency
protection circuitry to ensure proper
operation even in overdriven conditions
and superb quality components, metallic
polyester condensers and large diameter coils.
All components embedded in special resin to
ensure total immunity to vibration
• Fully rotatable constant directivity horn to
adjust HxV angle coverage in the non-coaxial
models
• Ergonomic integrated carrying handles, M10
rigging points, top-hat speaker stand socket
and wall bracket mounting hardware
Verve 108A
Verve 115MA
Verve 112MA
400 + 100W
400 + 100W
400 + 100W
400 + 100W
Verve 110
Verve 108
Verve 115M
Verve 112M
300W
250W
500W
500W
Verve
Speaker Systems
Verve 110A
Packed with features and guaranteed to deliver your music in the way you demand: loud and clear!
New Digital Signal Processor with 4 factory
equalization presets provides simple and efficient
EQ adjustment. The presets have been extensively
tested in the anechoic chamber to optimize the
sound performance for different applications.
VERVE Series is also available in white colour.
• ORIGINAL: is the typical ‘VERVE’ sound
• BOOST: bass and high are emphasized for
a rich and engaging sound
• HI-END/ VOCAL: very flat response, typical
of the top touring systems. Provides increased
intelligibility and presence for vocals and speech
• WARM: provides a full bodied response to the
Low/Mid frequencies and less aggressive on the
high
29
Active Verve
2-way, bi-amplified,
bass reflex design
Biamped: 400W RMS
LF, 100W RMS HF,
Class D power
amplifiers
Digital Signal Processor
with 4 Equalization
Presets
15 mm (0.59”) birch
plywood scratch
resistant enclosure
and internal bracing
High efficiency switch
mode power supply
Passive Verve
Control Panel: features
balanced XLR/Jack input
and XLR LINK OUT,
Volume, EQ Presets,
HP Filter, 3 status LED
indicators
Built-in passive
crossover with soft-trip
protection for the LF
woofer and HF driver
Speakon NL-4 IN and
LINK OUT connectors
Verve 212a
SPL Processed Active Speaker
400W + 100W RMS - 133dB
• 2 x 320 mm (12”) woofer with 64 mm (2.5”)
voice coil, custom made for FBT
• 36 mm (1.4”) B&C compression driver with
64 mm (2.5”) voice coil
• Frequency response from 50Hz to 20 kHz
• 70°H x 50°V Constant Directivity Horn
• 6xM10 anchoring points and 2 heavy duty
metal handles
Verve 212
Passive reinforcement speaker
800W/8ohm RMS - 134dB SPL
SPL Processed Active Speaker
400W + 100W RMS - 130dB SPL
SPL Processed Active Speaker
400W + 100W RMS - 130dB SPL
• 380 mm (15”) LF woofer with 64 mm (2.5”)
voice coil, custom made for FBT
• 25 mm (1”) exit throat B&C HF compression
driver with 36 mm (1.4”) voice coil
• Frequency response from 45Hz to 20 kHz
• 80°H x 50°V Constant Directivity Horn
• 6 x M10 suspension points, wall bracket
mount flange plate, 35 mm (1 3/8”) top-hat
speaker stand socket, two integrated handles
• 320 mm (12”) LF woofer with 64 mm (2.5”)
voice coil, custom made for FBT
• 25 mm (1”) exit throat B&C HF compression
driver with 36 mm (1.4”) voice coil
• Frequency response from 52Hz to 20 kHz
• 80°H x 50°V Constant Directivity Horn
• 6 x M10 suspension points, wall bracket
mount flange plate, 35 mm (1 3/8”) top-hat
speaker stand socket, one integrated handle
Verve 115
Verve 112
Passive reinforcement speaker
400W/8ohm RMS - 129dB SPL
Passive reinforcement speaker
400W/8ohm RMS - 128dB SPL
Speaker Systems
Verve 112a
Verve
Verve 115a
31
Active Verve
2-way, bi-amplified,
bass reflex design
Biamped: 400W RMS
LF, 100W RMS HF, Class
D power amplifiers
Digital Signal Processor
with 4 Equalization
Presets
15 mm (0.59”) birch
plywood scratch
resistant enclosure and
internal bracing
High efficiency switch
mode power supply
Passive Verve
Control Panel: features
balanced XLR/Jack input
and XLR LINK OUT,
Volume, EQ Presets,
HP Filter, 3 status LED
indicators
Built-in passive
crossover with soft-trip
protection for the LF
woofer and HF driver
Speakon NL-4 IN and
LINK OUT connectors
Verve 110a
Verve 108a
Processed Active Speaker
400W + 100W RMS - 128dB SPL
Processed Active Speaker
400W + 100W RMS - 128dB SPL
• 250 mm (10”) LF woofer with 50 mm (2”)
voice coil, custom made for FBT
• 25 mm (1”) exit throat B&C HF compression
driver with 36 mm (1.4”) voice coil
• Frequency response from 60Hz to 20 kHz
• 80°H x 50°V Constant Directivity Horn
• 6 x M10 suspension points, wall bracket
mount flange plate, 35 mm (1 3/8”) top-hat
speaker stand socket, one integrated handle
• 200 mm (8”) LF woofer with 50 mm (2”)
voice coil, custom made for FBT
• 25 mm (1”) exit throat B&C HF compression
driver with 36 mm (1.4”) voice coil
• Frequency response from 65Hz to 20 kHz
• 80°H x 50°V Constant Directivity Horn
• Wall bracket mount flange plate, 35 mm
(1 3/8⅜”) top-hat speaker stand socket
Verve 110
Verve 108
Passive reinforcement speaker
300W/8ohm RMS - 125dB SPL
Passive reinforcement speaker
250W/8ohm RMS - 123dB SPL
Processed Active Reinforcement Monitor
400W + 100W RMS - 131dB SPL
Processed Active Reinforcement Monitor
400W + 100W RMS - 129dB SPL
• 2-way, bass-reflex, bi-amplified
• 400W RMS LF, 100W RMS HF, Class D power
amplifiers
• 380 mm (15”) custom woofer with 64 mm
(2.5”) voice coil
• 25 mm (1”) B&C compression driver with
44 mm (1.7”) voice coil
• Digital Signal Processor with 4 Equalization
Presets
• 15 mm (0.59”) birch plywood scratch resistant
enclosure and internal bracing
• Frequency response from 50Hz to 20 kHz
• Control Panel: balanced XLR/Jack input and
XLR link out, Volume, EQ Presets, HP Filter, 3
status LED indicators
• 90° omnidirectional angle dispersion
• Wall bracket mount flange plate, 35 mm
(1 3/8”) top-hat speaker stand socket, two
integrated handles
• 2-way, bass-reflex, bi-amplified
• 400W RMS LF, 100W RMS HF, Class D power
amplifiers
• 320 mm (12”) custom woofer with 64 mm
(2.5”) voice coil
• 25 mm (1”) B&C compression HF driver with
44 mm (1.7”) voice coil
• Digital Signal Processor with 4 Equalization
Presets
• 15 mm (0.59”) birch plywood scratch resistant
enclosure and internal bracing
• Frequency response from 55Hz to 20 kHz
• Control Panel: balanced XLR/Jack input and
XLR link out, Volume, EQ Presets, HP Filter,
3 status LED indicators
• 90° omnidirectional angle dispersion
• Wall bracket mount flange plate, 35 mm
(1 3/8”) top-hat speaker stand socket, two
integrated handles
Verve 115M
Verve 112M
Sound Reinforcement Monitor
500W/8ohm RMS - 129dB SPL
Sound Reinforcement Monitor
300W/8ohm RMS - 127.5dB SPL
• Built-in passive crossover with soft-trip
protection for the LF woofer and HF driver
• Speakon NL-4 IN and LINK OUT connectors
• Built-in passive crossover with soft-trip protection
for the LF woofer and HF driver
• Speakon NL-4 IN and LINK OUT connectors
Speaker Systems
Verve 112Ma
Verve
Verve 115Ma
33
Model
Configuration
Verve 115a
Verve 112a
Verve 110a
Verve 108a
Verve 115Ma Verve 112Ma
2
2
2
2
2
2
2
Built-in amplifier cont. LF/HF
W RMS
350/80
350/80
350/80
350/80
350/80
350/80
350/80
Built-in amplifier max. LF/HF
W RMS
400/100
400/100
400/100
400/100
400/100
400/100
400/100
W
800/200
800/200
800/200
800/200
800/200
800/200
800/200
Built-in amplifier max. peak LF/HF
Frequency response
@-6dB
50Hz - 20KHz 45Hz - 20KHz 52Hz - 20KHz 60Hz - 20KHz 60Hz - 20KHz 57Hz - 20KHz 65Hz - 20KHz
Low frequency woofer
inch
2x12 - 2.5 coil 15 - 2.5 coil
12 - 2.5 coil
10 - 2 coil
8 - 2 coil
15 - 2.5 coil
12 - 2.5 coil
High frequency driver
inch
1.4 - 2.5 coil
1 - 1.4 coil
1 - 1.4 coil
1 - 1.4 coil
1 - 1.4 coil
1 - 1.7 coil
1 - 1.7 coil
127.5 / 133
125.5 / 130
124 / 130
122.5 / 128
121 / 128
125.5 / 131
124 / 129
Maximum SPL cont/peak
Dispersion
Input impedance
Crossover frequency
AC Power requirements
Verve
ProMaxX
way
Verve 212a
dB
HxV
kOhm
Net dimensions (WxHxD)
Net weight
Transport dimensions(WxHxD)
Transport weight
80° x 50°
80° x 50°
80° x 50°
80° x 50°
90°
90°
22
22
22
22
22
22
kHz
1.3
1.6
1.6
1.8
2.2
1.5
1.6
VA
450
450
450
450
450
450
450
Input connectors
Power cord
70° x 50°
22
XLR with loop XLR with loop XLR with loop XLR with loop XLR with loop XLR with loop XLR with loop
m / ft
mm
inch
Kg
Lb
mm
inch
Kg
Lb
5 / 16.4
5 / 16.4
5 / 16.4
5 / 16.4
5 / 16.4
5 / 16.4
5 / 16.4
394x1015x380
425x742x420
394x645x380
326x565x325
268x500x270
620x360x470
550x320x410
15.51x39.96x14.96 16.73x29.21x16.53 15.51x25.39x14.96 12.83x22.24x12.79 10.55x19.68x10.62 24.40x14.17x18.50 21.65x12.59x16.14
34.5
76.05
27.2
59.96
20.6
45.41
15.4
33.95
11.6
25.57
19.6
43.21
16.6
36.59
500x1135x500
530x860x530
500x765x500
430x685x430
330x620x330
530x740x530
670x430x500
19.68x44.68x19.68 20.86x33.85x20.86 19.68x30.11x19.68 16.92x26.96x16.92 12.99x24.40x12.99 20.86x29.13x20.86 26.37x16.92x19.68
38.5
84.87
30.2
66.57
23.4
51.58
17.4
38.36
13.6
29.98
22.6
49.82
19.4
42.76
Verve 212
Verve 115
Verve 112
Verve 110
Verve 108
Verve 115M
Verve 112M
2
2
2
2
2
2
2
34
Model
Configuration
Recommended amplifier
Long term power
Short term power IEC 268-5
way
W RMS
800
500
400
300
250
500
500
W
400
250
200
150
125
250
250
1600
1000
800
600
500
1000
1000
8
8
8
8
8
8
8
W
Nominal impedance
Ohm
Frequency response
@-6dB
55Hz - 18KHz 50Hz - 18KHz 55Hz - 18KHz 60Hz - 18KHz 70Hz - 18KHz 60Hz - 18KHz 70Hz - 18KHz
Low frequency woofer
inch
2x12 - 2.5 coil 15 - 2.5 coil
12 - 2.5 coil
10 - 2 coil
8 - 2 coil
15 - 2.5 coil
12 - 2.5 coil
High frequency driver
inch
1.4 - 2.5 coil
1 - 1.4 coil
1 - 1.4 coil
1 - 1.4 coil
1 - 1.4 coil
1 - 1.7 coil
1 - 1.7 coil
Sensitivity (@1W/1m)
dB
101
99
98
97
95
99
98
dB
130/ 134
125 / 129
124 / 128
121 / 125
119 / 123
124 / 129
125 / 129
HxV
70° x 50°
80° x 50°
80° x 50°
80° x 50°
80° x 50°
90°
90°
Maximum SPL cont/peak (Bi-Amp)
Dispersion
Crossover frequency
1.4
1.6
1.8
2
2.2
1.6
2
Recommended HP filter
40hz 24dboct
35hz 24dboct
40hz 24dboct
45hz 24dboct
55hz 24dboct
45hz 24dboct
65hz 24dboct
Input connectors
2 x Speakon
NL4 in & thru
2 x Speakon
NL4 in & thru
2 x Speakon
NL4 in & thru
2 x Speakon
NL4 in & thru
2 x Speakon
NL4 in & thru
2 x Speakon
NL4 in & thru
2 x Speakon
NL4 in & thru
Net dimensions (WxHxD)
Net weight
Transport dimensions(WxHxD)
Transport weight
kHz
mm
inch
Kg
Lb
mm
inch
Kg
Lb
394x1015x380
425x742x420
394x645x380
326x565x325
268x500x270
620x360x470
550 x 320 x410
15.51x39.96x14.96 16.73x29.21x16.53 15.51x25.39x14.96 12.83x22.24x12.79 10.55x19.68x10.62 24.40x14.17x18.50 21,65x12,59x16,14
34.5
76.05
27.2
59.96
20.6
45.41
15.4
33.95
11.6
25.57
19.6
43.21
16.6
36,59
500x1135x500
530x860x530
500x765x500
430x685x430
330x620x330
530x740x530
670 x 430 x 500
19.68x44.68x19.68 20.86x33.85x20.86 19.68x30.11x19.68 16.92x26.96x16.92 12.99x24.40x12.99 20.86x29.13x20.86 26,37x16,92x19,68
38.5
84.87
30.2
66.57
23.4
51.58
17.4
38.36
13.6
29.98
22.6
49.82
19.4
42,76
35
Speaker Systems
SUBLine
The SUBline series
consists of 12Sa, 15Sa,
18Sa active and 18S
passive subwoofer
models, built in birch
plywood and aimed
to extend the low
frequency response to
a wide range of FBT
speaker systems
Created with the aim
to maximize SPL/SIZE
ratio, they have Class
D amplifiers, switch
mode power supply
and Digital Signal
Processor with presets
to match any other FBT
speaker
With IN/OUT stereo
connectors, it is
possible to use only one
subwoofer with Left
and Right speakers
Active SUBLine
Optional wheels,
ergonomic integrated
carrying handles and
plywood cabinets allow
an easy transport
15 mm (5/8”) Baltic
birch plywood cabinet
with scratch & scuff
resistant paint finish
M20 (20 mm) top
mount speaker stand
socket, two aluminum
carrying handles
Provides additional low
frequency reinforcement
when used along with
Verve, EvoMaxX, Jolly
speakers
SUBLine 18Sa
Processed Active Subwoofer
1200W RMS - 137dB SPL
• Bass-reflex design Subwoofer
• 460 mm (18”) high excursion woofer with
75 mm (3”) voice coil, custom made for FBT
by B&C
• Frequency response from 33Hz - 120Hz
• 1200W RMS Class D power amplifier with
switch mode power supply
• Digital Signal Processor with 6 presets,
3 equalization with 2 LPF Crossover Settings,
6 step digital delay line
• Control Panel with Stereo XLR in/outs,
Volume, EQ Presets, Delay, Phase Reversal
Switch 0°-180°, 3 status LED indicators
SUBLine 18S
Sound Reinforcement Subwoofer
1200W RMS - 136dB SPL
• Neutrik Speakon NL - 4MDV connectors
IN & LINK OUT
• External digital processor required:
FBT DLM26 Digital Loudspeaker
Management
SUBLine 12Sa
Processed Active Subwoofer
600W RMS - 129/133dB SPL
• Compact band-pass design Subwoofer with
high SPL and punch
• 380 mm (15”) high excursion magnet woofer
with 75 mm (3”) voice coil, custom made
for FBT
• Frequency response from 38Hz to 120Hz
• 600W RMS Class D power amplifier with
switch mode power supply
• Digital Signal Processor with 4 presets, 2
equalization with 2 LPF Crossover Settings
• Control Panel with Stereo combo XLR/Jack in/
outs, Stereo XLR HP-filter outs, Volume, EQ
Presets, Phase Reversal Switch 0°-180°,
3 status LED indicators
• Very Lightweight
• Compact band-pass design Subwoofer with
high SPL and punch
• 320 mm (12”) high excursion magnet woofer
with 64 mm (2.5”) voice coil, custom made
for FBT
• Frequency response from 42Hz to 140Hz
• 600W RMS Class D power amplifier with
switch mode power supply
• Digital Signal Processor with 4 presets,
2 equalization with 2 LPF Crossover Settings
• Control Panel with Stereo combo XLR/Jack
in/outs, Stereo XLR HP-filter outs, Volume,
EQ Presets, Phase Reversal Switch 0°-180°,
3 status LED indicators
• Very Lightweight
Speaker Systems
Processed Active Subwoofer
600W RMS - 135dB SPL
SUBLine
SUBLine 15Sa
37
Model
Configuration
SUBLine 12Sa
1
1
W RMS 900
400
400
Built-in amplifier max. LF/HF
W RMS 1200
600
600
1200
1200
38Hz - 120Hz
42Hz - 140Hz
Frequency response
W 2400
@-6dB 33Hz - 140Hz
Low frequency woofer
inch 1x18 - 3 coil
1x15 - 3 coil
1x12 - 2.5 coil
High frequency driver
inch -
-
-
131 / 135 half-space
129 / 133 half-space
omnidirectional
omnidirectional
22
22
80 or 120Hz
90 or 140Hz
450
450
stereo XLR with loop, HP out
stereo XLR with loop, HP out
5 / 16.4
5 / 16.4
480x560x595
18.91x22.06x23.44
425x510x520
16.73x20.07x20.47
31.5 / 70
24 / 52.91
590x665x705
23.22x26.18x27.75
435x610x630
17.12x24.01x24.80
35 / 77
28 / 61.72
Maximum SPL cont/peak
Dispersion
Input impedance
Crossover frequency
AC Power requirements
SUBLine
ProMaxX
way 1
SUBLine 15Sa
Built-in amplifier cont. LF/HF
Built-in amplifier max. peak LF/HF
38
SUBLine 18Sa
dB 133 / 137 half-space
H x V omnidirectional
kOhm 22
kHz 80 or 120Hz
VA 800
Input connectors
Power cord
Net dimensions (WxHxD)
Net weight
Transport dimensions(WxHxD)
Transport weight
stereo XLR with loop
m / ft 5 / 16.4
mm 510x629x650
inch 20.07x24.76x25.59
Kg / Lb 42 / 92.59
mm 700x790x800
inch 27.55x31.10x31.49
Kg / Lb 53 / 116.84
Model
Configuration
Recommended amplifier
Long term power
Short term power IEC 268-5
SUBLine 18S
way
W RMS
W
W
Nominal impedance
Ohm
Frequency response
@-6dB
1 reflex
1200
600
2400
4
33hz - 400hz
Low frequency woofer
inch
18 - 3 coil
High frequency driver
inch
-
Sensitivity (@1W/1m)
dB
98.5
Maximum SPL cont/peak (Bi-Amp)
dB
133 / 136 half-space
Dispersion
Crossover frequency
HxV
kHz
omnidirectional
external active
Recommended HP filter
28hz - 24dboct
Input connectors
2 x Speakon NL4 in & throu
Net dimensions (WxHxD)
Net weight
Transport dimensions(WxHxD)
Transport weight
mm
inch
Kg/Lb
mm
inch
Kg/Lb
510x629x650
20.07x24.76x25.59
39 / 85.98
700x790x800
27.55x31.10x31.49
50 / 110.23
39
Stage Monitor
StageMaxX
MaxX More!
The new stage monitor
FBT’s brand new StageMaxX has been inspired
by the need to have a product specifically
designed and engineered for use as stage
monitor, overcoming all compromises for
a full user satisfaction.
The extremely heavy-duty and resonance
free polypropylene cabinet is born from the
enormous experience of FBT in gas injected
mold engineering it acoustically behaves like a
wooden cabinet allowing the perfect integration
of all the components for an uncompromising
quality in a compact, elegant, unobtrusive on
stage, extremely comfortable and easy to carry
product.
StageMaxx 12Ma is the right combination
of all the quality features to be a perfect stage
monitor:
• Low profile and aesthetic elegance
• Compact size
• Frequency response studied for stage monitor
applications
• High headroom before feedback
• High sound quality
• Great power and dynamics
• Symmetric dispersion
• Aligned LF and HF acoustic centers
• Easy handling on stage
• Lightweight
• Heavy-duty polypropylene cabinet
StageMaxX features a 12” B&C loudspeaker
custom made for FBT and coaxially mounted
with a B&C 1” exit throat compression driver.
The coaxial configuration allows perfect alignment
of the acoustic centers of the transducers,
guaranteeing symmetry of dispersion and
improving focus of the stereo image in Left-Right
configuration.
Bi-amplification design with high dynamic
Class D amplifiers delivering 400W + 100W RMS
through a switch mode power supply.
Digital Signal Processor with 4 factory equalization
presets provides simple and efficient EQ
adjustment to optimize the acoustical response for
different applications. The FOH preset allows the
use in suspended installation as well as ‘drum fill’
applications.
StageMaxX features two lateral M10 rigging
points and wall mounting bracket for different
applications (optional accessories).
3 frontal status LED indicators to control
ON OFF limiter and protection state.
Three ergonomic integrated carrying handles,
one frontally placed to easily drag and move the
monitor on stage and the replaceable Teflon feet
ensure sliding on stage with minimal wear.
The cabinet has 35° or 55° tilted front panel for an
optimal listening distance for single user (35°) or
for more users (55°).
The 4 presets are:
• ORIGINAL: is the typical “MaxX” sound
adapted to “STAGE” application
• HI-CUT/DRUM FILL: provides less mid-high for
a comfortable listening in near-field at high level
• LO-CUT/DOUBLE: provides less low frequency
for better intelligibility and for optimal coupling
in stereo configuration
• FOH: Front Of House use in suspended or polemount installations
• 2-way, bi-amplified, bass reflex design cabinet
• Coaxial custom FBT 320 mm (12”) B&C
speakers with 64 mm (2.5”) voice coil
• B&C 25 mm (1”) exit throat compression
driver and 44 mm (1.7”) voice coil and
weather resistant coating
• Bi-amp: high dynamic Class D amplifiers
400W + 100W RMS to provide a pleasant
sound even at loud volume
• High efficiency switch mode power supply
• Digital Signal Processor with 4 factory
equalization presets
• Control Panel: XLR/Jack input and XLR link
out, Volume, 4 Presets, HP Filter, 3 frontal
status LED indicators
• 90° Directivity Horn
• Proprietary filtered algorithms, dynamic
equalization at low frequencies, advanced
energy control allows an high SPL while
granting reliable and distortion free audio
reproduction with high headroom
• Sturdy gas-injected polypropylene molded
enclosures engineered to avoid undesired
resonance
• High SPL in a compact size monitor
• 35° or 55° tilted front panel for an optimal
listening distance for single or multiple users
• Three ergonomic integrated carrying handles,
two M10 rigging points and wall mounting
bracket
• Teflon replaceable feet allow an easy use on
stage
Stage Monitor
Processed Active Reinforcement Monitor
400W + 100W RMS - 130dB SPL
StageMaxX
StageMaxX 12Ma
41
StageMaxX is also available
in white colour.
Model
Configuration
way 2
Built-in amplifier cont. LF/HF
W RMS 350/80
Built-in amplifier max. LF/HF
W RMS 400/100
Built-in amplifier max. peak LF/HF
Frequency response
W 800/200
@-6dB 60Hz - 20KHz
Low frequency woofer
inch 12 - 2.5 coil
High frequency driver
inch 1 - 1.7 coil
Maximum SPL cont/peak
Dispersion
Input impedance
Crossover frequency
StageMaxX
ProMaxX
StageMaxX 12Ma
AC Power requirements
dB 124 / 130
H x V 90°
kOhm 22
kHz 1.8
VA 450
Input connectors
Power cord
Net dimensions (WxHxD)
Net weight
Transport dimensions(WxHxD)
Transport weight
XLR with loop
m / ft
5 / 16.4
mm 550x289x392
inch 21.65x11.37x15.43
Kg / Lb 13.6 / 29.98
mm 670x430x500
inch 26.37x16.92x19.68
Kg / Lb 16.4 / 36.15
42
SM-S 12
Metal bracket with
top-hat speaker
stand socket
SM-U 12
Wall metal bracket
to mount in horizontal
position
KMS 300
Aluminium speaker
stand Air-Cushioned
Monitor 55°
Monitor 35°
43
Speaker Systems
HiMaxX
A benchmark
in Sound
Reinforcement
With the HiMaxX series, FBT establishes a
reference point on the scenario of 12” and 15”
sound reinforcement polypropylene enclosures,
introducing performance and technical content
of an impressive standard.
Speaker Systems
HiMaxX
The engineering of the enclosures, the use
of switch mode power supplies and highefficiency power amplifiers, the custom
design of the transducers made FBT’s R&D team
achieve the maximum in power/weight ratio.
44
Three models; two 2-way full-range enclosures in polypropylene,
HiMaxX 40 (12”+1”) and HiMaxX 60 (15’’+1.4”), plus a compact
18’’ bandpass SUB in birch plywood (HiMaxX 100Sa). Compact and
light weight, HiMaxX brilliantly solve all the most demanding needs for
bands, musicians and professionals looking for powerful, versatile
and very high quality loudspeaker enclosures. Ideal for live and sound
reinforcement applications requiring ease of transport, they are also
suited to fixed installations, thanks to the cabinets’ design and optional
accessories.
HiMaxX 40a
HiMaxX 100Sa
1100+250W
1000+250W
1200W
HiMaxX 60
HiMaxX 40
700W
500W
Speaker Systems
HiMaxX
HiMaxX 60a
Amazing audio quality, thrilling performance, innovative design and extreme reliability
45
• A powerful dynamic design for aggressive
clean-cut lines. A sturdy light-weight
enclosure that ensures great versatility
and is ready for installation, thanks to
its special mounting points and optional
accessories.
The asymmetrical design enables the
enclosures to be used as stage monitors.
Speaker Systems
HiMaxX
• A specially designed control panel ensures
ease of use and intuitive control.
Mic/Line input, auxiliary stereo input with
(HiMaxX 40a), 3-band EQ, ground-lift,
diagnostic LED.
46
• Loudspeaker components are engineered
in collaboration with B&C. FBT studied and
designed special chassis. A more efficient
ventilation circuit with a consequent
reduction of 2dB “power compression”,
a considerably stiffer cone to improve
reliability and distortion and an even more
powerful neodymium magnet to increase
control and efficiency.
The voice coil has a diameter of 75 mm (3”)
for higher power handling and reliability.
BOX 100
Ceiling bracket
balancing stand
KMS 300
Adjustable air-cushion floor
stand (ø 35 mm - 1.38”)
- max weight
56 Kg (124 Lb)
• The silent preamplifier manufactured with
SMD technology has the job of handling the
equalization, 24dB/oct crossover, sophisticated
protections, limiter and the commands of the
control panel.
• The horn’s profile has been designed to
ensure greater directivity control and lower
distortion. The dispersion angle is 90°H x
60°V.
Speaker Systems
• The development of the innovative amplifier
is the result of years of research by the
FBT R&D labs. It manages to combine the
contrasting features of lightness, high
power, efficiency and reliability, using
the very latest technology. A switch mode
power supply to reduce the weight and
increase the power output velocity, a very high
performance PWM amplifier for the low
frequencies, to maximize the power fed out
with minimum heat dissipation. A Class G
amplifier for the high frequencies enables
to achieve the audio quality of a Class A, with
a much higher output.
HiMaxX
• B&C compression driver with a 25 mm (1’’)
throat and 44 mm (1.7’’) coil (HiMaxX 40) for
high power handling. Thanks to the use of
a shorting copper cap, high frequencies are
even more dynamic and crystal-clear.
47
Active HiMaxX
2-way, bi-amplified in
Bass- Reflex design
Switch mode power
supply for an excellent
ratio weight/power
Sturdy cabinet in
polypropylene also
designed for stage
monitor use
Analog signal processor
with limiter
4 x M10 suspension
points, 35 mm ø (1.38”)
top-hat for speaker
stand placement and
wall bracket mount
flange, 2 integrated
carrying handles
90°H x 60°V constant
directivity horn
HiMaxX 60a
Processed Active Speaker
1100W + 250W RMS - 135dB SPL
• B&C custom designed 380 mm (15”)
neodymium woofer with 75 mm (3”) voice
coil
• B&C 36 mm (1.4”) compression driver with
64 mm (2.5”) voice coil
• 700W RMS PWM LF power amplifier
• 200W RMS Class G HF power amplifier
• Control panel with:
- XLR Input and XLR Link
- Gain and Volume functions in a single
potentiometer improving the dynamic
range and input signal/noise ratio
- 3-band EQ (Bass, Mid, High)
- Ground-lift
- Diagnostic LED
Passive HiMaxX
HiMaxX 60
Passive crossover filter
featuring “soft-trip”
circuitry to ensure full
protection of LF woofer
and HF driver
2 NL-4 Neutrik™
Speakon connectors
Sound Reinforcement Speaker
700W / 8ohm - 132dB SPL
Processed Active Speaker
1000W + 250W RMS - 133dB SPL
Processed Active Subwoofer
1200W RMS - 139dB SPL
• B&C custom designed 320 mm (12”)
neodymium woofer with 75 mm (3”)
voice coil
• B&C 25 mm (1”) compression driver with
44 mm (1.7”) voice coil
• 500W RMS PWM LF power amplifier
• 150W RMS Class G HF power amplifier
• Control panel with:
- Gain and Volume functions in a single
potentiometer improving the dynamic
range and input signal/noise ratio
- Combo XLR/jack input XLR link
- Mic/Line selection
- Independent RCA input channel with
separate volume control to connect external
devices such as MP3, CD, PC players
- 3-band EQ (Bass, Mid, High)
- Ground-Lift
- Diagnostic LED
• Enclosure suitable for stacking
• Bandpass subwoofer design
• 18” (460 mm) custom neodymium B&C
woofer with a 3” (75 mm) voice coil
• Built-in 1200W RMS PWM amplifier
• Switch mode power supply
• Analogue signal processor with limiter
• Control panel with:
- XLR/input and XLR stereo outputs with
Hi-Pass, filter for connecting the satellites
- Volume
- Ground-Lift
- 0°-180° phase inverter switch
- Limiter LED
• 18 mm (0.7”) birch plywood enclosure
• The special “bandpass” acoustic loading
increases efficiency and maximum SPL
• 8 x M10 suspension points, stand socket
and two integrated wooden handles
• Optional 4 swivel-mount casters 80 mm
ø (3.15”) on request
HiMaxX 40
Sound Reinforcement Speaker
500W / 8ohm - 131dB SPL
Speaker Systems
HiMaxX 100Sa
HiMaxX
HiMaxX 40a
49
Model
Configuration
way
HiMaxX 100Sa
2
2
Band-Pass
W RMS
700/200
500/150
900
Built-in amplifier max. LF/HF
W RMS
1100/250
1000/250
1200
W
2200/500
1600/500
2400
40Hz - 20kHz
45Hz - 20kHz
38 - 120Hz
Frequency response
@-6dB
Low frequency woofer
inch
1x15 - 3 coil
1x12 - 3 coil
1x18 - 3 coil
High frequency driver
inch
1.4 - 2.5 coil
1 - 1.7 coil
-
Sensitivity (@1W/1m)
dB
99
99
102
Maximum SPL cont./peak
dB
129/135
127/133
135/139
Dispersion
HxV
90° x 60°
90° x 60°
omnidirectional
Input impedance
kohm
22
22
22
kHz
1.2
1.6
active 120
XLR with loop
XLR/jack with loop RCA aux
stereo XLR with loop
5 / 16.4
5 / 16.4
5 / 16.4
482x757x427
19x29.8x16.8
407x634x370
16x24.9x14.5
530x605x655
21x23.8x25.8
28.3
62.4
17.9
39.4
43
94.8
520x867x600
20.4x34.1x23.6
495x720x470
19.5x28.3x18.5
660x735x785
26x29x31
30.3
66.8
20.5
45.2
47
103.6
HiMaxX 60
HiMaxX 40
Crossover frequency
Input connectors
HiMaxX
ProMaxX
HiMaxX 40a
Built-in amplifier cont. LF/HF
Built-in amplifier max. peak LF/HF
50
HiMaxX 60a
Power cord
Net dimensions (WxHxD)
Net weight
Transport dimensions (WxHxD)
Transport weight
m / ft
mm
inch
Kg
Lb
mm
inch
Kg
Lb
Model
Configuration
Recommended amplifier
way
W RMS
2
2
700
500
Long term power
W
350
250
Short term power (IEC 268-5)
W
1400
1000
8
8
40Hz - 20kHz
50Hz - 20kHz
Nominal impedance
ohm
Frequency response
@-6dB
Low frequency woofer
inch
1x15 - 3 coil
1x12 - 3 coil
High frequency driver
inch
1.4 - 2.5 coil
1 - 1.7coil
Sensitivity (@1W/1m)
dB
99
99
Maximum SPL cont./peak
dB
129/132
127/131
Dispersion
90° x 60°
90° x 60°
1.3
1.6
Recommended HP filter
35Hz - 24dBoct
45Hz - 24dBoct
Recommended external filter
-
-
Input connectors
2 x Speakon
2 x Speakon
482x757x427
19x29.8x16.8
407x634x370
16x24.9x14.5
26
57.3
16
35.2
520x867x600
20.4x34.1x23.6
495x720x470
19.5x28.3x18.5
28.5
62.8
18.5
40.8
Crossover frequency
Net dimensions (WxHxD)
Net weight
Transport dimensions (WxHxD)
Transport weight
HxV
kHz
mm
inch
Kg
Lb
mm
inch
Kg
Lb
51
Speaker Systems
ProMaxX
52
Speaker Systems
ProMaxX
The next
MaxX generation
ProMaxX Speaker Series maintains some of the winning attributes of
the FBTMaxX Series, incorporates the latest technological achievements
designed by FBT’s R&D team, and guarantees quality of construction,
utmost reliability, extreme portability and unbelievable sound fidelity.
ProMaxX 12a
ProMaxX 10a
ProMaxX 15Sa
600+300W
600+300W
600+300W
1200W
ProMaxX 14
ProMaxX 12
ProMaxX 10
700W
600W
400W
Speaker Systems
ProMaxX
ProMaxX 14a
P ow er ful and Versati l e - Li ghtwei ght - I n c re a s e d S P L - DS P w i t h 8 p re s e t s
The ProMaxX Series 2-way speakers feature a sophisticated cabinet
design that increases low frequency SPL and virtually eliminates
undesired resonance. A custom FBT horn design provides improved
projection, accuracy and uniform dispersion of the mid high and high
frequencies. Two ergonomic carrying handles are integrated into the
cabinets for easier placement on speaker stands and when transporting.
An innovative electronic DSP circuitry and FBT’s latest technological
breakthroughs in the development Class D amplification circuitry,
“Raises the Bar to New Heights” for lightweight powered speaker
systems. Combining this with their ease of use and the versatility
for many portable or installed sound reinforcement applications, the
ProMaxX Speakers provide Musicians, DJ’s, Audio / Video Contractors,
Sound Reinforcement and Audio Rental Companies with advanced
systems of Pro audio reproduction.
53
Speaker Systems
ProMaxX
54
• Sturdy, gas-injected polypropylene molded
enclosures, engineered to contain undesired
resonance
• B&C neodymium magnet loudspeakers
custom made for FBT
• Class D, 1200W + 600W RMS power
amplifiers with high efficiency switch mode
power supplies
• Proprietary filter algorithms, dynamic
equalization at low frequencies, and advanced
energy control allow high SPL while always
granting reliable and distortion free audio
reproduction
• Original horn profile provides extremely
accurate and uniform dispersion for the entire
frequency radiation angle, not just for the
horizontal and vertical plane
• An increase in total SPL thanks to our
enclosure design, engineered with 4 bassreflex ports to increase the size of the
radiation area, This further enhances low
frequency efficiency and performance
without a substantial increase in the external
dimensions of the cabinets
FBT’s Digital Signal Processor with 8 factory equalization presets
provides simple and efficient EQ adjustment. Extensive tests in our
anechoic chamber went into the development of these presets to optimize
the ProMaxX speakers for use for numerous applications.
8 speakers in one!
The presets include:
• ORIGINAL: is the typical FBT sound for general application use
• FLOOR: the ProMaxX immediately becomes an ideal stage monitor
• VOCAL: provides increased intelligibility and presence for vocals and
speech
• WARM: gives a full bodied response to the low-mid frequencies and less
aggressive on the highs
• HI-END SYSTEM: make the response similar to speakers used for
touring sound
• FARFIELD: optimize the response for listening distance over 15-20
meters, (48-65-ft,)
• NEARFIELD: optimized response for listening distance of up to 8 mt
(25ft,)
• LOUDNESS: low frequency emphasis / presense at lower volumes for
recorded music playback or disco
Our new unique 14” LF neodymium magnet woofer with a 3” voice
coil is featured in the ProMaxX 14a, This 14” woofer is housed inside the
same enclosure as the ProMaxX 12a, and delivers the performance of a
15” woofer, but at the size and weight of a 12”.
Two ergonomic carrying handles, M10 fly points, top-hat speaker stand
socket.
2 - way enclosures have 3 monitor tapers for use as a floor wedge at 12°,
45°, 55°, providing extraordinary versatility for monitor application.
12°
45°
55°
Active ProMaxX
2-way, bi-amplified,
bass reflex design
cabinet
Bi-amped: 600W RMS
LF, 300W RMS HF, Class
D power amplifiers with
switch mode power
supplies
Digital signal processor
with 8 equalization
presets
Control Panel: features
XLR input and link out,
Volume, EQ Presets,
HP Filter, Ground-Lift
Switch
2 x M10 suspension
points, 35 mm (1.3/8”)
top-hat speaker stand
socket, wall bracket
mount flange plate
90°H x 60°V constant
directivity horn
Passive ProMaxX
Front of House or Stage
Floor Monitor: with 12°,
40° and 55° monitoring
angles
Built-in passive
crossover with soft-trip
protection for the LF
woofer and HF driver
Speakon NL-4 IN and
LINK OUT connectors
ProMaxX 14a
ProMaxX 12a
Processed Active Speaker
600W + 300W - 135.5dB SPL
Processed Active Speaker
600W + 300W - 133dB SPL
• 355 mm (14”) LF neodymium magnet
woofer with 76 mm (3”) voice coil, custom
made for FBT by B&C
• 36 mm (1.4’’) exit throat HF driver with
64 mm (2.5”) voice coil
• Frequency response from 45Hz to 20 kHz
• ProMaxX 14a uses the same size gas-injected
polypropylene molded enclosure as the
ProMaxX 12a, but features a New 14” LF
Woofer for lower frequency response
• Extremely light, only 17.4 Kg / 38.3 Lb
• 320 mm (12”) LF neodymium magnet woofer
with 76 mm (3”) voice coil, custom made
for FBT by B&C
• 25 mm (1”) exit throat B&C HF neodymium
magnet compression driver
• Frequency response from 48Hz to 20 kHz
• Sturdy gas-injected polypropylene molded
enclosure with 2 integrated handles
• Extremely light, only 15.8 Kg / 34.8 Lb
ProMaxX 14
Passive reinforcement speaker
700W / 8ohm - 132dB SPL
ProMaxX 12
Passive reinforcement speaker
600W / 8ohm - 130dB SPL
• 250 mm (10”) LF neodymium magnet woofer
with 64 mm (2.5”) voice coil, custom made
for FBT by B&C
• 25 mm (1”) throat exit B&C HF neodymium
magnet compression driver
• Frequency response from 58Hz to 20 kHz
• Sturdy gas-injected polypropylene molded
enclosure with one integrated handle
• Extremely light , only 11.3 Kg / 24.9 Lb
• Compact band-pass design subwoofer with
high SPL and punch
• 380 mm (15”) high excursion woofer with
76 mm (3”) voice coil, custom made for FBT
by B&C
• Frequency response from 38Hz to 120Hz
• 1200W RMS Class D power amplifier with
switch mode power supply
• Digital Signal Processor with 8 presets,
2 equalization with 4 LPF different frequency
• Control Panel with XLR input and link out,
Volume, EQ Presets, Delay, Phase Switch
0°-180°, Ground-Lift Switch
• 15 mm (5/8”) Baltic birch plywood cabinet
with scratch & textured resistant paint finish
• M20 (20 mm) top mount speaker stand
socket, two aluminum carrying handles
• Provides additional low frequency
reinforcement when used along with the
ProMaxX speakers
Processed Active Speaker
600W + 300W - 131dB SPL
ProMaxX 10
Passive reinforcement speaker
400W / 8ohm - 127dB SPL
Processed Active Subwoofer
1200W - 136dB SPL
Speaker Systems
ProMaxX 15Sa
ProMaxX
ProMaxX 10a
57
Model
Configuration
ProMaxX 10a
ProMaxX 15Sa
2
2
2
1
Built-in amplifier cont. LF/HF
W RMS
400/200
400/200
400/200
800
W RMS
600/300
600/300
600/300
1200
Built-in amplifier max. peak LF/HF
W
@-6dB
Low frequency woofer
inch
High frequency driver
inch
Maximum SPL cont/peak
Dispersion
Input impedance
Crossover frequency
AC Power requirements
ProMaxX
ProMaxX 12a
Built-in amplifier max. LF/HF
Frequency response
58
way
ProMaxX 14a
dB
HxV
1200/600
1200/600
1200/600
2400
45Hz - 20KHz
48Hz - 20KHz
58Hz - 20KHz
38Hz - 120Hz
14 - 3 coil
neodymium
12 - 3 coil
neodymium
10 - 2,5 coil
neodymium
1x15 - 3 coil
neodymium
1,4 - 2,5 coil
1 - 1,4 coil
neodymium
1 - 1,4 coil
neodymium
-
127,5 / 135,5
126 / 133
123 / 127
132 / 136 half-space
90° x 60°
90° x 60°
90° x 60°
omnidirectional
kOhm
22
22
22
22
kHz
1,3
1,6
1,8
preset dependant
VA
Input connectors
640
640
640
640
XLR with loop
XLR with loop
XLR with loop
XLR with loop
Power cord
m/ft
5/16,4
5/16,4
5/16,4
5/16,4
Net dimensions (WxHxD)
mm
inch
402x644x345
15,8x25,4x13,6
402x644x345
15,8x25,4x13,6
320x550x275
12,6x21,6x10,8
507x585x605
20x23x23,82
17,4 / 38.3
15,8 / 34,8
11,3 / 24,9
31 / 68
500x745x440
19,7x29,3x17,3
500x745x440
19,7x29,3x17,3
400x630x360
15,7x24,8x14,2
615x670x715
24,2x26,4x28,2
20.4 / 45
18,8 / 41,4
13,8 / 30,4
35 / 77
ProMaxX 14
ProMaxX 12
ProMaxX 10
Net weight
Transport dimensions(WxHxD)
Transport weight
kg/lb
mm
inch
kg/lb
Model
Configuration
Recommended amplifier
way
W RMS
2
2
2
700
600
400
Long term power
W
350
300
200
Short term power IEC 268-5
W
1400
1200
800
Nominal impedance
Ohm
Frequency response
@-6dB
8
8
8
50Hz - 18KHz
55Hz - 18KHz
60Hz - 18KHz
Low frequency woofer
inch
1x14 - 3 coil - neodymium
1x12 - 3 coil - neodymium
1x10 - 2,5 coil neodymium
High frequency driver
inch
1 x 1,4 - 2,5 coil
1 - 1,4 coil - neodymium
1 - 1,4 coil - neodymium
Sensitivity (@1W/1m)
dB
100
99
97
dB
128 / 132
126 / 130
123 / 127
HxV
90° x 60°
90° x 60°
90° x 60°
1,3
1,6
1,8
40hz - 24dboct
45hz - 24dboct
50hz - 24dboct
Maximum SPL cont/peak
Dispersion
Crossover frequency
kHz
Recommended HP filter
Input connectors
Net dimensions (WxHxD)
Net weight
Transport dimensions (WxHxD)
Transport weight
mm
inch
kg/lb
mm
inch
kg/lb
2 x Speakon NL4 in & throu
2 x Speakon NL4 in & throu
2 x Speakon NL4 in & throu
402x644x345
15,8x25,4x13,6
402x644x345
15,8x25,4x13,6
320x550x275
12,6x21,6x10,8
16 / 35.2
14,4 / 38,7
9,9 / 21,8
500x745x440
19,7x29,3x17,3
500x745x440
19,7x29,3x17,3
400x630x360
15,7x24,8x14,2
19 / 41.8
17,4 / 38,3
12,4 / 27,3
59
Speaker Systems
EvoMaxX
The Evolution of
an International
Best Seller
Speaker Systems
EvoMaxX
Evolving from the FBTMaxX Series of
loudspeakers, FBT EvoMaxX speakers feature
new woofers and even lighter, more powerful
Class D amplifiers with an extremely low
noise degree. An EvoMaxX digital signal
processor with four presets also provides quick
equalization contours for any acoustically
challenging venue.
But alongside these key performance and
portability improvements, FBT has been inspired
to develop the EvoMaxX Series by one very
important goal: offering the customer more
value for the money. EvoMaxX’s lightweight yet
sturdy polypropylene cabinets feature a monitor
taper designed to ensure that they perform with
excellence no matter whether they are used at
front of house for a main sound system, as stage
floor monitors or within permanent installations.
60
Additional options are also available for
extending low frequency response in the shape
of the SUBLine 12Sa, 15Sa and 18Sa, all of
which boast birch plywood enclosures with 15”
band-pass and 18” reflex designs respectively.
• Sturdy, gas-injected polypropylene molded enclosures,
engineered to prevent undesired resonance
• New ultra-light woofers custom made for FBT with
a weather resistant coating, allows covered outdoor
applications
• B&C HF compression drivers
• Latest Class D, 400W LF and 100W HF power
amplifiers with high efficiency switch mode power
supplies
• Extremely lightweight power amplification design
passively cooled circuitry, no noisy fans
• New Digital Signal Processor with 4 EQ Presets
EvoMaxX 4a
EvoMaxX 2a
EvoMaxX 9Sa
400+100W
400+100W
400+100W
600W
EvoMaxX 6
EvoMaxX 4
EvoMaxX 2
400W
300W
250W
Speaker Systems
EvoMaxX
EvoMaxX 6a
More powerful Class D amplifiers - Extra lightweight polypropylene cabinets - Higher SPL for optimal audio reproduction
New DSP with four EQ presets - More value for the money
• Advanced filter algorithms including dynamic
equalization at low frequencies and advanced energy
control to allow high SPL while always granting
reliable and distortion-free audio reproduction
• An increase in total SPL thanks to FBT’s new digital
limiter algorithms and increased amplifier power
output
• Ergonomic carrying handles, M10 fly points, top-hat
speaker stand socket and monitor application taper
ensure superb versatility for live sound events and
permanent installations
FBT’s New Digital Signal Processor with 4 factory
equalization presets provides simple and efficient EQ
adjustment.
Extensive tests in our anechoic chamber went into the
development of these presets to optimize the EvoMaxX
speakers for use for numerous applications:
4 speakers in one!
ORIGINAL: corresponds to the typical ‘MaxX’ sound for
use in general applications
FLOOR: the EvoMaxX immediately becomes an ideal
stage monitor
VOCAL: provides increased intelligibility and presence
for vocals and speech
WARM: provides a full bodied response to the LOW/MID
frequencies and less aggressive on the high
61
Active EvoMaxX
2-way, bi-amplified,
bass reflex design
cabinet
Biamped: 400w RMS LF,
100w RMS HF, Class D
power amplifiers with
switch mode power
supplies
Digital Signal
Processor with 4
Equalization Presets
Sturdy gas-injected
polypropylene molded
enclosure with two
integrated handles and
Stage Floor Monitor
taper
25 mm (1”) exit throat
B&C HF compression
driver with 44 mm
(1.7’’) voice coil
Control Panel: features
balanced XLR/Jack
input and XLR link out,
Volume, EQ Presets,
HP Filter, 3 status LED
indicators,
90°H x 60°V Constant
Directivity Horn
Passive EvoMaxX
Enclosure suitable for
stacking
Built-in passive
crossover with soft-trip
protection for the LF
woofer and HF driver
Speakon NL-4 IN and
LINK OUT connectors
EvoMaxX 6a
EvoMaxX 4a
Processed Active Speaker
400W + 100W RMS - 130dB SPL
Processed Active Speaker
400W + 100W RMS - 130dB SPL
• 380 mm (15”) LF woofer with 64 mm (2.5”)
voice coil
• Frequency response from 42Hz to 20 kHz
• 4 x M10 suspension points, 35 mm (13/8”)
top-hat speaker stand socket, wall bracket
mount flange plate
• Extremely light, only 24.4 Kg / 53.8 Lb
• 320 mm (12”) LF woofer with
64 mm (2.5”) voice coil
• Frequency response from 50Hz
to 20 kHz
• 4 x M10 suspension points,
35 mm (1 3/8”) top-hat
speaker stand socket, wall
bracket mount flange plate
• Extremely light, only
15.6 Kg / 34.4 Lb
EvoMaxX 6
Passive Reinforcement Speaker
400W/8ohm - 130dB SPL
EvoMaxX 4
Passive Reinforcement Speaker
300W/8ohm - 128dB SPL
EvoMaxX 9Sa
Processed Active Subwoofer
600W RMS - 132dB SPL
• 250 mm (10”) LF woofer with 50 mm (2”)
voice coil
• Frequency response from 58Hz to 20 kHz
• 2 x M10 suspension points, 35 mm (1 3/8”)
top-hat speaker stand socket, wall bracket
mount flange plate
• Extremely light, only 12 Kg / 26.5 Lb
• Compact bass-reflex design Subwoofer
• 380 mm (15”) high excursion woofer with
75 mm (3”) voice coil, custom made for FBT
• Frequency response from 38Hz to 120Hz
• 600W RMS Class D power amplifier with
switch mode power supply
• Digital Signal Processor with 4 presets,
2 equalization with 2 LPF Crossover Settings
• Control Panel with balanced Stereo combo
XLR/Jack in/outs, Stereo XLR HP-filter
outs, Volume, EQ Presets, Phase Reversal
Switch 0°-180°, 3 status LED indicators
• Lightweight cabinet enclosure with
internal wooden reinforcements
• M20 (20 mm) top mount speaker stand
socket, two integrated carrying handles
• Provides additional low frequency
reinforcement when used along with
2 - way EvoMaxX speakers
• Extremely lightweight only 21.7 Kg (48.4 Lb)
EvoMaxX 2
Passive Reinforcement Speaker
250W/8ohm - 125dB SPL
Speaker Systems
Processed Active Speaker
400W + 100W RMS - 128dB SPL
EvoMaxX
EvoMaxX 2a
63
Model
Configuration
EvoMaxX 2a
EvoMaxX 9Sa
2
2
1
Built-in amplifier cont. LF/HF
W RMS 350/80
350/80
350/80
400
W RMS 400/100
400/100
400/100
600
Built-in amplifier max. peak LF/HF
W 800/200
@-6dB 42Hz - 20KHz
800/200
800/200
1200
50Hz - 20KHz
58Hz - 20KHz
40Hz - 120Hz
Low frequency woofer
inch 15 - 2.5 coil
12 - 2.5 coil
10 - 2 coil
1x15 - 3 coil
High frequency driver
inch 1 - 1.7 coil
1 - 1.4 coil
1 - 1.4 coil
-
dB 126 / 130
124 / 130
122.5 / 128
128 / 132 half-space
H x V 90° x 60°
90° x 60°
90° x 60°
omnidirectional
22
22
22
Maximum SPL cont/peak
Dispersion
Input impedance
Crossover frequency
AC Power requirements
EvoMaxX
ProMaxX
EvoMaxX 4a
Built-in amplifier max. LF/HF
Frequency response
64
EvoMaxX 6a
way 2
kOhm 22
kHz 1.6
1.6
1.8
preset dependant
VA 450
450
450
450
XLR with loop
XLR with loop
stereo XLR with loop,
HP out
Input connectors
Power cord
Net dimensions (WxHxD)
Net weight
XLR with loop
m / ft 5 / 16.4
mm 482x757x399
inch 19x29.8x15.7
5 / 16.4
5 / 16.4
352x550x307
13.9x21.6x12.1
496x648x485
19.5x25.5x19.1
15.6 / 34.4
12 / 26.5
21.7 / 48.4
510x704x410
20.1x29.1x16.1
435x630x395
17.1x24.8x15.5
595x760x575
23.4x29.9x22.6
18.2 / 40
14.3 / 31.5
25.7 / 57.4
EvoMaxX 6
EvoMaxX 4
EvoMaxX 2
2
2
2
W RMS
400
300
250
Long term power
W
200
150
125
Short term power IEC 268-5
W
800
600
500
Transport dimensions (WxHxD)
Transport weight
Kg / Lb 24.4 / 53.8
5 / 16.4
407x634x330
16x25x13
mm 595x878x515
inch 23.4x34.6x20.3
Kg / Lb 28.4 / 62.6
Model
Configuration
Recommended amplifier
way
Nominal impedance
Ohm
8
8
8
Frequency response
@-6dB
48Hz - 18kHz
55Hz - 18kHz
60Hz - 18kHz
Low frequency woofer
inch
1x15 - 2.5 coil
1x12 - 2.5 coil
1x10 - 2 coil
High frequency driver
inch
1 x 1 - 1.7 coil
1 - 1.4 coil
1 - 1.4 coil
Sensitivity (@1W/1m)
dB
99
98
97
Maximum SPL cont/peak (Bi-Amp)
dB
126 / 130
124 / 128
121 / 125
HxV
90° x 60°
90° x 60°
90° x 60°
1.3
1.6
1.8
Recommended HP filter
40Hz - 24dboct
45Hz - 24dboct
50Hz - 24dboct
Input connectors
2 x Speakon NL4 in & thru 2 x Speakon NL4 in & thru
2 x Speakon NL4 in
& thru
482x757x399
19x29.8x15.7
407x634x330
16x25x13
352x550x307
13.9x21.6x12.1
24.8 / 54.6
16 / 35
12.8 / 28
595x878x515
23.4x34.6x20.3
510x704x410
20.1x29.1x16.1
435x630x395
17.1x24.8x15.5
28.2 / 62
18.3 / 40.3
14.5 / 32
Dispersion
Crossover frequency
Net dimensions (WxHxD)
Net weight
Transport dimensions(WxHxD)
Transport weight
kHz
mm
inch
Kg / Lb
mm
inch
Kg / Lb
65
Speaker Systems
Jolly
Control panel of the Blue
badge versions with:
Ground-Lift, Combo XLR/Jack
Input, XLR-M output, Mic/Line
selector, 2-Band EQ (High-Low),
Limiter, Volume
Control panel of the Red
badge versions with:
Ground-Lift, Combo XLR/Jack
Input, XLR-M output, Limiter,
Volume
Jolly 15r a
300+50W
150+50W
Jolly 15b
Jolly 15r
350W
250W
Jolly
Speaker Systems
Jolly 15b a
66
A multipurpose performer: Jolly speakers
are versatile and easy to use in applications like
Band PA, personal monitor, stage performance,
theatres and halls, clubs, gyms, bars and more.
S/J8
Adjustable wall
mount stand
S/J5
Adjustable wall mount
stand
S/J8U
Wall mounting
bracket
S/J5U
Wall mounting
bracket
The winning
solution for
quality and price
Flexible, powerful and dependable, the
Jolly series embraces a wide range of
polypropylene enclosure speaker systems, with
bi-amplification design, passive versions,
70/100V line version (5Bt).
Jolly 12b a
Jolly 12r a
250+50W
150+50W
Jolly 12b
Jolly 12r
300W
250W
Jolly 8b a Jolly 8r a
Jolly 5b a
Jolly 5r a
150+50W
80+20W
60+20W
60W
Jolly 8b
Jolly 8r
Jolly 5b
Jolly 5r
160W
120W
80W
60W
Jolly 5bt
Jolly
Speaker Systems
50W
67
A comprehensive line to fulfill all professional audio needs
Jolly Series is available in two different
versions, Blue or Red, offering different
performance, power, components and price.
The custom amplifiers in class G and AB
are designed in bi-amplification for woofers
and compression drivers and include the ADAP
(Advanced Dynamic Active Protection) processor
to optimize the acoustic response, guarantee
total transducer protection and reliability.
BOX 112
Horizontal wall
mounting bracket
The sturdy enclosures are made of ultra-light
gas-injected polypropylene, engineered
to avoid any internal resonance and allow
maximum portability and lightness.
Integrated handles, pole mount socket, M10
anchoring points make the Jolly extremely
flexible to all kinds of installations also
thanks to the wide range of accessories.
All passive versions are equipped with crossover
networks of very high quality.
S/J5C
Metal flange
for flush mounting installation
MS 30BK
Adjustable metal
floor stand
2.5 mm (1”)
Active Jolly
2-way bi-amplified
system in Bass-Reflex
Polypropylene enclosure
with integrated handle
exept version 5ba-5ra
2 x M10 anchoring
points (15ba-15ra12ba-12ra), 2 x M6
suspension points
(8ba-8ra-5ba-5ra)
25 mm (1”) HF custom
AF compression driver
(15ba-15ra-12ba-12ra8ba-8ra)
25 mm (1”) HF tweeter
(5ba-5ra)
90°H x 60°V constant
directivity horn
(15ba-15ra-12ba-12ra8ba-8ra)
ADAP® (Advanced
Dynamic Active
Protection)
(15ba-12ba-8ba)
Passive Jolly
Analog signal processor
with limiter (15ba-15ra12ba-12ra-8ba)
Internal passive
crossover filter with
“soft-trip” protection
circuits on woofer and
compression driver
Linear frequency
response over the entire
dispersion angle
Jolly 15b a
Jolly 12b a
Processed Active Monitor
300W + 50W RMS -127dB SPL
Processed Active Monitor
250W + 50W RMS - 126dB SPL
• 380 mm (15”) high efficiency and high
excursion custom speaker
• 300W RMS MOS-FET amplifier for low
frequencies and 50W RMS class AB amplifier
for high frequencies
• 320 mm (12”) high efficiency custom speaker
• 250W RMS MOS-FET amplifier for low
frequencies and 50W RMS class AB amplifier
for high frequencies
Jolly 15b
Jolly 12b
Sound Reinforcement Monitor
350W - 127dB SPL
Sound Reinforcement Monitor
300W - 126dB SPL
• NL-4 Neutrik™ Speakon input and link
connectors
• NL-4 Neutrik™ Speakon input and link
connectors
Jolly 15r a
Jolly 12r a
Processed Active Monitor
150W + 50W RMS - 124dB SPL
Processed Active Monitor
150W + 50W RMS - 124dB SPL
• 380 mm (15”) high efficiency and high
excursion custom speaker
• 150W RMS class G amplifier for low
frequencies and 50W RMS class AB amplifier
for high frequencies
• 320 mm (12”) high efficiency custom speaker
• 150W RMS class G amplifier for low
frequencies and 50W RMS class AB amplifier
for high frequencies
Jolly 15r
Jolly 12r
Sound Reinforcement Monitor
250W - 125dB SPL
Sound Reinforcement Monitor
250W - 125dB SPL
• NL-4 Neutrik™ Speakon input and link
connectors
• NL-4 Neutrik™ Speakon input and link
connectors
Jolly 8b a
Jolly 5b a
Processed Active Monitor
150W + 50W RMS - 122dB SPL
Processed Active Monitor
60W + 20W RMS - 115dB SPL
• 200 mm (8”) high efficiency and high
excursion custom speaker
• 150W RMS class G amplifier for low
frequencies and 50W RMS class AB amplifier
for high frequencies
• 130 mm (5”) high efficiency and high
excursion custom speaker
• 60W RMS MOS-FET amplifier for low
frequencies and 20W RMS class AB amplifier
for high frequencies
• 24dB/oct active filter
• Available in white color 5baw
Jolly 8b
Sound Reinforcement Monitor
160W - 121dB SPL
• NL-4 Neutrik™ Speakon input and link
connectors
Jolly 5b
Sound Reinforcement Monitor
80W - 117dB SPL
• Input panel with jack and terminal connector
for bare wires
• Available in white color 5bw
• 200 mm (8”) high efficiency and high
excursion custom speaker
• 80W RMS class AB amplifier for low
frequencies and 20W RMS class AB amplifier
for high frequencies
Jolly 8r
Sound Reinforcement Monitor
120W - 119.5dB SPL
• Jack input connectors
• 4 position volume selector: 3W - 12.5W 25W - 50W / 100V
• Input panel with terminal connector for bare
wires
• Also available in white: JOLLY 5btw
Jolly 5ra
Processed Active Monitor
60W RMS - 110dB SPL
• 130 mm (5”) custom speaker
• 60W RMS class AB amplifier
• 24dB/oct active filter
Jolly 5r
Sound Reinforcement Monitor
60W - 110dB SPL
• Input panel with terminal
connector for bare wires
Speaker Systems
Processed Active Monitor
80W + 20W RMS - 117dB SPL
Jolly 5bt
Sound Reinforcement Monitor
50W/70-100V - 113dB SPL
Jolly
Jolly 8r a
69
Model
Configuration
way
Internal Amplifiers
W RMS
Frequency response
@-6dB
Jolly 12b a
Jolly 12r a
Jolly 8b a
Jolly 8r a
Jolly 5b a
Jolly 5r a
2
2
2
2
2
2
2
2
300+50
150+50
250+50
150+50
150+50
80+20
60+20
60
50Hz-20kHz
60Hz-20kHz
50Hz-20kHz
60Hz-20kHz
60Hz-20kHz
70Hz-20kHz
80Hz-20kHz
90Hz-20kHz
1x15”
2 coil
1x12”
2 coil
1x12”
2 coil
1x8”
1.5 coil
1x8”
1.5 coil
1x5”
1 coil
1x5”
1 coil
1”+horn
1 coil
1”+horn
1 coil
1”+horn
1 coil
1”+horn
1 coil
1xTweeter
+horn
0.8 coil
1xTweeter
0.8 coil
1xTweeter
0.8 coil
Low frequency woofer
inch
High frequency driver
inch
1”+horn
1 coil
Sensibilità (@1W/1m)
dB
99
98
98
98
96
95
93
89
Maximum SPL count/peak
dB
124/127
121/124
123/126
121/124
119/122
114/117
112/115
107/110
Dispersion
Crossover frequency
HxV
kohm
kHz
Input connectors
Jolly
ProMaxX
Jolly 15r a
1x15”
2.5 coil
Input impedance
70
Jolly 15b a
Power supply cable
Net dimensions (WxHxD)
Net weight
Transport dimensions (WxHxD)
Transport weight
m / ft
mm
inch
Kg
Lb
mm
inch
Kg
Lb
Model
Configuration
Recommended amplifier
way
90°x60°
90°x60°
90°x60°
90°x60°
90°x60°
90°x60°
90°x90°
90°x90°
22
22
22
22
22
22
22
22
active 1.8
active 2
active 1.8
active 2
active 2
active 2.5
active 2.7
passive 3.5
XLR with loop
XLR with loop
combo/XLR M
combo/XLR M
combo/XLR M
combo/XLR M
combo/XLR M
combo/XLR M
5 / 16.4
5 / 16.4
5 / 16.4
5 / 16.4
5 / 16.4
5 / 16.4
5 / 16.4
5 / 16.4
410x663x387
16.1x26.1x14.2
410x663x387
16.1x26.1x14.2
410x663x387
16.1x26.1x14.2
410x663x387
16.1x26.1x14.2
255x415x245
10x16.3x9.6
255x415x245
10x16.3x9.6
170x275x180
6.7x10.87x7.1
170x275x180
6.7x10.9x7.1
19.5
43.00
19.5
43.00
18.5
40.79
16.5
35.27
8.1
17.86
6.2
13.69
3.5
7.72
3
6.61
495x740x475
19.5x29.1x18.7
495x740x475
19.5x29.1x18.7
495x740x475
19.4x29.1x18.7
495x740x475
19.5x29.1x18.7
330x480x320
13x18.9x12.6
330x480x320
13x18.9x12.6
240x345x235
9.4x13.6x9.3
240x345x235
9.4x13.6x9.2
22
48.50
22
48.50
21
46.30
18.5
40.79
9.1
20.06
7.2
15.90
4
8.82
3.5
7.72
Jolly 15b
Jolly 15r
Jolly 12b
Jolly 12r
Jolly 8b
Jolly 8r
Jolly 5b
Jolly 5bt
Jolly 5r
2
2
2
2
2
2
2
2
2
W RMS
350
250
300
250
160
120
80
50 (70/100V) 60
Long-term applicable power (AES)
W
175
125
150
125
80
60
40
25
30
Short-term applicable power (IEC 268-5)
W
700
500
600
500
320
240
160
100
120
8
8
8
8
8
8
16
-
16
50Hz-20kHz
55Hz-20kHz
50Hz-20kHz
60Hz-20kHz
70Hz-20kHz
80Hz-20kHz
80Hz-20kHz
80Hz-20kHz
80Hz-20kHz
1x15”
2 coil
1x12”
2 coil
1x12”
2 coil
1x8”
1.5 coil
1x8”
1.5 coil
1x5”
1 coil
1x5”
1 coil
1x5”
1 coil
1”+horn
1 coil
1”+horn
1 coil
1”+horn
1 coil
1”+horn
1 coil
1xTweeter
1 coil
1xTweeter
0.8 coil
1xTweeter
0.8 coil
1xTweeter
0.8 coil
93
93
90
110/113
107/110
Nominal impedance
Frequency response
ohm
@-6dB
Low frequency woofer
inch
1x15”
2.5 coil
High frequency driver
inch
1”+horn
1 coil
Sensitivity (@1W/1m)
dB
99
98
98
98
96
95.5
Maximum SPL cont/peak
dB
124/127
122/125
123/126
122/125
118/121
116.5/119.5 114/117
Dispersion
HxV
90°x60°
90°x60°
90°x60°
90°x60°
90°x60°
90°x60°
90°x90°
90°x90°
90°x90°
Crossover frequency
kHz
1.8
2.2
1.8
2.5
3
3.5
3.5
3.5
4
40Hz-24dB oct
50Hz-24dB oct
40Hz-24dB oct
40Hz-24dB oct
50Hz-24dB oct
60Hz-24dB oct
Recommended HP filter
Input connectors
Net dimensions (WxHxD)
Net weight
Transport dimensions (WxHxD)
Transport weight
mm
inch
Kg
Lb
mm
inch
Kg
Lb
70Hz-24dB oct
70Hz-24dB oct
80Hz-24dB oct
2 x speakon 2 x speakon 2 x speakon 2 x speakon 2 x speakon 1 x jack
1 x jack
+ terminal
strip
terminal
strip
terminal
strip
410x663x387
16.1x26.1x14.2
410x663x387
16.1x26.1x14.2
410x663x387
16.1x26.1x14.2
410x663x387
16.1x26.1x14.2
255x415x245
10x16.3x9.6
255x415x245
10x16.3x9.6
170x275x180
6.7x10.8x7.1
170x275x180
6.7x10.8x7.1
170x275x180
6.7x10.8x7.1
14.5
31.97
14.5
31.97
13.5
29.76
13.5
29.76
5.8
12.79
5
11.04
2.2
4.85
3.2
7.05
1.7
3.75
495x740x475
19.5x29.1x18.7
495x740x475
19.5x29.1x18.7
495x740x475
19.5x29.1x18.7
495x740x475
19.5x29.1x18.7
330x480x320
13x18.9x12.6
330x480x320
13x18.9x12.6
240x345x235
9.4x13.6x9.2
240x345x235
9.4x13.6x9.2
240x345x235
9.4x13.6x9.2
17
37.48
17
37.48
16
35.27
16
35.27
6.8
15.00
6
13.25
2.7
5.95
3.7
8.16
2.2
4.85
71
Integrated Sound Systems
Amico
Integrated Sound System
AMICO 10USB
AMICO 10USB is a completely integrated, ready-wired sound system
offering a convenient plug and play solution for Houses of Worship,
schools, conference halls, DJ sets, sports centers and small musical
groups performing live in small to medium sized venues.
The mixer, amplification and subwoofer are contained in a single ultra
lightweight, yet extremely sturdy polypropylene enclosure. A storage
compartment in the rear of the AMICO 10USB houses the two 2- way
satellite speakers, allowing the wheeled system to be transported as
a one piece unit. AMICO 10USB offers a professional mixing input
channels with built-in class D power amplifiers and switch mode power
supply. The system is powered by AC mains.
• Analog audio processor with 24dB/oct electronic crossover
network and ADAP (Advanced Dynamic Active Protection)
for total protection of the components
• 3 Class D power amplifiers with switch mode power
supplies to power the subwoofer and the two satellite
speakers
• Built-in mixing console with 6 x XLR mic inputs with
phantom power supply, 2 x mono inputs and 4 x stereo
input channels, 3-band EQ, 99 selectable digital effects
with effects send and return controls
• USB input/output to play back music programs/ files
from a computer or to record from the master audio
output of the AMICO 10 USB to a computer-recording
program
• A quick and easy set-up: complete system setup in less
than 5 minutes! Just connect the satellite speakers to
the AMICO 10USB amplifier outputs using the optional
Speakon speaker cables and connect the AC power cable
to an AC wall outlet
• Multi-function knobs to block, unblock, and remove the
cover/ lid transport handle
• Removable back panel for access to the satellite
speakers’ storage compartment.
The back panel protects the satellite speakers and keeps
them secure when transporting the complete system
Integrated Sound Systems
Amico
73
Amico 10USB
Processed Active Sound System
500W+2x150W RMS - 130dB total SPL
• 3-way. tri-amplified Bass-Reflex system
• 14 channel mixer with 99 presets digital
multieffect and phantom power
• USB connection for music programs in play
and record
• USB input/output to play back music
programs/ files from a computer or to record
from the master audio output of the AMICO
10USB to a computer - recording program
• Subwoofer: 380 mm (15”) high efficiency
and high excursion custom woofer with a
75 mm (3”) voice coil
• 2 x Two way satellite speakers: featuring
165 mm (6.5”) woofers with 38 mm (1.5”)
voice coils, and a 25 mm (1”) compression
driver coupled to a 90°H x 60°V constant
directivity horn
• 500W RMS Class D amplifier for subwoofer
• 2 x 150W RMS Class D amplifier for the
satellite speakers
• Switch mode power supply
Model
AMICO 10 USB
SUB / COMBO
3 WAY / SUB+2SAT
500 + 2x150
Configuration
Internal amplifier
2mono+4stereo
Frequency response
2 x XLR F
2.2
Sensitivity (@1W, 1m)
dBu
0
Dispersion
Max gain
dB
75
Low frequency woofer
inch
1x15
Equivalent input noise
dB
-128
inch
CMRR (@ main out, gain 75dB)
dB
-80
High frequency driver
SAT output connectors
2 x SPEAKON
Configuration
Internal Amplifiers
MIXER
LINE
TONE
Impedance
Max input signal
2 x JACK balanced
kohm
MICRO
LINE
STEREO CHANNELS
33
SAT
Internal amplifier / Recommended
Way
W RMS
@-6dB
dB
dB
OxV
W RMS
dBu
30
Impedance
Max gain (@ main out)
dB
40
Frequency response
High Shelving (@ 12kHz)
dB
±15
Sensitivity (@1W, 1m)
Medium Peaking (@ 2.5kHz)
dB
±12
Maximum SPL (cont-peak)
Low Shelving (@ 80Hz)
dB
±15
Dispersion
4 x XLR F
Low frequency woofer
inch
22
High frequency driver
inch
dBu
0
Max gain
dB
75
Input connectors
Power supply cable
Equivalent input noise
dB
-128
CMRR (@ main out, gain 75dB)
dB
-80
Max input signal
kohm
Quantity and type
TONE
Maximum SPL (cont-peak)
Impedance
8 x JACK balanced
kohm
22
dBu
30
Max gain (@ main out )
dB
18
High Shelving (@ 12kHz)
dB
±15
Medium Peaking (@ 2.5kHz)
dB
±12
Low Shelving (@ 80Hz)
dB
±15
Max input signal
Impedance
ohms
dBu
22
Distortion + Noise @ 16
dBu
0.025%
dB
Frequency response (@ 0 / -1dB)
Sample frequency
Frequency response
V44
Nylon cover
Net dimensions
(WxHxD)
Net weight
Transport dimensions
(WxHxD)
Transport weight
ohms
-6dB
dB
dB
OxV
40Hz-120Hz
97
124/130
omnidirectional
2
150
4
90Hz-20kHz
93.5
115/125
90° x 60°
1x6.5
1x1
m / inch
mm
inch
Kg / Lb
478x780x433
18.8x30.7x17
34 / 74
mm
inch
Kg / Lb
Optional accessories
96
20Hz-20kHz
kHz
1
500WSUB+2x150WSAT
1 x SPEAKON
5/197
600
Mx output (Monitor, Eff, Tape In)
Signal/Noise ratio
GENERAL
SPECIFICATIONS
MICRO
kohm
Quantity and type
Impedance
OUTPUTS
74
Max input signal
channels
Quantity and type
BUILT-IN
FFECT
Amico
ProMaxX
MONO CHANNELS
Quantity and type
Impedance
W RMS
48
20Hz-20kHz
Amico Kit
Cod. 20698
Optional carrying bag, spekaer
stands, speakon-speakon cables
570x880x570
22.4x36.5x22.4
38 / 81.6
Carrying cover, twin cables,
2 aluminium stands
Digital
Loudspeaker
Management
DLM26
Features superb audio quality with premium hi-end
AKM5392 24bit A/D converters and AKM 4396
24bit D/A converters, carefully optimized double
precision signal processing coupled with 24bit
conversion ensure a dynamic range >110dB
The unit can work in STANDARD MODE or in DCL
MODE. The first mode permits to configure the
crossover in 2x2 way + SUB, 2x3 way or 6way, the
input L, R, L+R are freely assignable to each output.
Digital Loudspeaker Management
The DLM26 is a DSP based 2 input x 6 output
Digital Loudspeaker management processor,
ideally suited for fixed installations and live events.
It combines the functions of a multitude of
conventional products in a compact 1U unit with
extensive PC remote control capabilities.
75
In DCL mode the unit can be configured in 3ch
DCL, 2ch DCL + 2ch standard, 1ch DCL + 4ch
standard. DCL mode means double compressor
limiter, each DCL channel have a double band
limiter and compressor with assignable LO/HI
split frequency.
Each input has 5 fully configurable filters, a
delay of 288.66ms max in step of 6.8us, gain.
Each output has 4 fully configurable filters, a
delay of 288.66ms max in step of 6.8us, gain,
phase, LO-pass/Hi-pass crossover from 6 to
24db/Oct with standard or custom Q, RMS
compressor with soft knee and peak limiter.
The 2 input levels are displayed by rows of 6
level LED + 1 clip LED, the 6 output levels are
displayed by rows of 5 level LED + 1 clip LED +
1 Limiter LED. The unit has 2 analog inputs, a
stereo digital SPDIF input, and 6 analog outputs.
Linking functions between inputs and linking
functions between outputs are available.
The Pc SW for the remote control via RS485 or
USB is allowing to connect in net up to 32 units
and is allowing to control full parameters of the
processor, to show the phase of the filter setting
and to adjust graphically the RMS compressor
and the Peak limiter. The comprehensive
standard specification also include up to 64
memories with security lockout and two
password level settings.
DLM26
Digital Loudspeaker Management
Rear panel
Inputs / Outputs
XLR balanced +20dbu max level
Total memories
64
THD+N
0.001% at 1kHz 0dBu
S/N
>110dB
Frequency Response
20Hz - 20kHz @ -0.5db
A/D and D/A
Resolution
24bits
DLM26
ProMaxX
Filters (5 each in/out)
76
Type
Peaking EQ, Hi-Shelv 1/2/Q, Lo-Shelv 1/2/Q, HPF 1/2/Q,
LPF 1/2/Q, All Pass 1/2 , Band pass, Notch
Orders
symmetrical Bell or High/Low Shelving up to second order
Filter gain
-15dBu / +15dBu by 0.5dBu resolution steps
Centre frequency
selectable with a 1/24th of octave resolution steps
20Hz / 20kHz
Filter Q/BW
Q from 0.05 up to 3 by 0.05 resolution steps
Compressors
Threshold:
-10 / 20dbu
Ratio:
1:1 / 32:1
Soft Knee:
0 / 100%
Attack Time:
10ms / 4s
Release Time:
0.1 / 3s
Limiters
Threshold:
-10 / +20dbu
Attack time:
2ms / 50ms
Release Time:
20ms / 200ms
High pass and Low
Pass Filters
From 1st order (Butterworth -6dB/Oct) up to 4th Order
(Butterworth, Linkwitz or Bessel -24dB/Oct), Custom Q
Filter’s setting step:
1/24th of octave
Maximum Delay:
288.66ms by 6.8us increment/decrement step, on
each Input and Output channel
Net Dimensions
(WxHxD)
Net Wheight:
Transport Dimensions
(WxHxD)
Transport Weight
mm
inch
Kg
Lb
480 x 40 x 220 - 19” (1U rack)
18.8x1.5x8 - 19" (1U rack)
2.8
6.1
mm
inch
Kg
Lb
530x100x310
20.8x3.9x12.2
3.9
8.6
Voltage
90 - 240Vac 50/60Hz
Power
30VA
Special features:
• Hi-pass/Lo-pass/Shelving custom Q second
order filters
• RMS compressor and PEAK limiter on each
output channel with time constant and
algorithm optimized for speaker thermal and
mechanical protection while maximizing the
output with no audible distortion
• Input channel L, R or L + R freely assignable to
each output channel
• Double Compressor Limiter Mode (DCL) with
two band RMS compressor and Peak limiter
with adjustable HP / LP split frequency and
separate parameter adj.
This is an exclusive and very useful feature in
general purpose digital processors
• ALL PASS first and second order filters useful
for Cardioid SUB configurations, very precise
phase crossover alignment, special pattern
control array, alignment between different
speakers and systems
PC software screenshots
High
Performance
Power
Amplifiers
Symbol 12000
2400+2400W
1500+1500W
Power Amplifier
Symbol
Symbol 18000
The Symbol power amplifiers are a high end
system throughout: the choice of Cascode
circuits, the oversized power stages and the
adoption of high efficiency techniques such as
2 and 3 step power supply ensure very high
current delivery capability.
The Symbol are available in two models
with output power of 1500+1500W and
2400+2400W into 2ohm.
The superb sound quality provided by the
output stages, the traditional FBT reliability and
an impressive range of technical features place
the Symbol 12000 and 18000 at the very apex
of their class, again confirming FBT’s hallmark
ability to provide the right solution for all
amplification needs.
FK
Flight-Case
77
Symbol 18000
2400+2400W
• Impulsive power with both channels driven:
2 x 2400W (2ohm)
• Thermal stability into 2ohm
• Electronically balanced XLR inputs and link
• 4-way SPEAKON power outputs
• 3 mode operations: parallel, bridge, stereo
• Full protection on each channel: short circuit,
temperature, SOA
• Clipping limiter
• Ground lift switch
Symbol 12000
1500+1500W
Symbol
ProMaxX
• Impulsive power with both channels driven:
2 x 1500W (2ohm)
• Thermal stability into 2ohm
• Electronically balanced XLR inputs and link
• 4-way Speakon power outputs
• 3 mode operations: parallel, bridge, stereo
• Full protection on each channel: short circuit,
temperature, SOA
• Clipping limiter
• Ground lift switch
78
Model
SYMBOL 18000
SYMBOL 12000
Balanced inputs
XLR-F
XLR-F
Impulsive power both channels
driven
W RMS
2 x 800W RMS @ 8ohm
2 x 1500W RMS @ 4ohm
2 x 2400W RMS @ 2ohm
2 x 600W RMS @ 8ohm
2 x 1000W RMS @ 4ohm
2 x 1500W RMS @ 2ohm
Impulsive power Bridge Mode
W RMS
3000W RMS @ 8ohm / 4800W RMS @ 4ohm
2000W RMS @ 8ohm / 3000W RMS @ 4ohm
Continuous power both channels
driven
@ THD < 0.05% 1kHz
W RMS
2 x 700W RMS @ 8ohm
2 x 1300W RMS @ 4ohm
2 x 1800W RMS @ 2ohm
2 x 550W RMS @ 8ohm
2 x 900W RMS @ 4ohm
2 x 1300W RMS @ 2ohm
Continuous power Bridge Mode
W RMS
2600W RMS @ 8ohm / 3600W RMS @ 4ohm
1800W RMS @ 8ohm / 2600W RMS @ 4ohm
Input sensitivity
2 Veff
1.7 Veff
Input impedance
15Kohm
15Kohm
Slew rate
> 40V/µS
> 40V/µS
Signal to noise ratio S/N
> 110dB “A” weighted
> 110dB “A” weighted
Total harmonic dist. (1kHz - 4ohm)
1W full power
< 0.02%
< 0.02%
IMD
1W full power
< 0.05%
< 0.05%
20Hz - 20kHz
20Hz - 20kHz
Damping factor
Frequency response
> 250 @ 8ohm - 1kHz
> 250 @ 8ohm - 1kHz
Maximum current output
80Aeff
80Aeff
Maximum power consumption
3500VA
2700VA
Power supply voltage
230V~
230V~
Protections
DC/Thermal/SOA/Soft Start
DC/Thermal/SOA/Soft Start
Cooling
2 variable speed fans
2 variable speed fans
Net Dimensions (WxHxD)
Net Weight
Transport dimensions (WxHxD)
Transport weight
@ ± 0.2dB
mm
inch
Kg / Lb
mm
inch
Kg / Lb
482x88x460
19x3.5x18.1
25 / 55.1
580x580x120
22.8x22.8x4.7
28 / 61.7
482x88x460
19x3.5x18.1
24 / 52.9
580x580x120
22.8x22.8x4.7
27 / 59.5
79
Mixers
Formula
Enhanced Features For
Professional Live Mixing
143 FXA
248
Completely Made in Italy, the Formula 182E,
248, 328 and the new 143FXA provide the
features and functions for numerous live sound
applications: touring sound reinforcement, live
recording, and permanent installations in Clubs,
Houses of Worship, Auditoriums and Theatres.
The Formula 248 and 328 Mixers models
offer enhanced capabilities such as FOH mixing,
monitor mixes, matrix mixing, 4 sub groups and
in ear monitoring. Frame sizes are of 24 and 32
channels, plus 6 stereo channels. The Formula
182E model is built with the same quality and
design reliability as the bigger models. Compact
and solid, this mixer is addressed to those sound
engineers who are looking for professional mixer
but with a small size.
The Formula 143FXA Powered Mixer has
great features such as 3 independent 24 bit DSP
effect processors that are MIDI controllable, USB
In/out, switchable anti-feedback filters, 2x850W
Class D power amplifiers with individual switch
mode power supplies, 7 band graphic EQ on
mains outs and a heavy duty steel chassis with
a latching steel cover. The Formula 143FXA
Powered Mixer offers versatility for a wide
range of professional sound reinforcement
applications.
328
• Balanced low noise XLR Input
(CMRR - 80dB)
• Mic preamplifier quality circuitry to
provide exceptional fidelity, dynamics and
transparency
• High-end EQ provide the desired ideal “live”
sound with a practical facility of adjustment
(+/- 15dB, Q > 2.5)
• 100 and 60 mm dust protected faders allow
smooth and accurate control of the input and
output level
• 4-pin XLR lamp socket to connect a 12V/5W
to illuminate the control panel (Formula
182/248/328)
Mixers
Formula
182 E
80
Mixers
• 32 Mono channels frame (Formula 328)
• 24 Mono channels frame (Formula 248)
• 2 stereo channels with mic and stereo inputs
with separate adjustment of the sources
• 2 stereo channels can be independently
routed to L/R
• L/R and Mono main outputs
• 8 Auxiliary sends (4 pre, 2 pre/post, 2 post)
• 2 Stereo effect returns
• 4 Matrix (8-In/1-Out)
• Channel assignments on 4 sub-groups, Mono
and L/R Stereo
• 4-band EQ with LF and HF Shelving,
• High/Mid and Low/Mid on all mono channels
• 4-band EQ on all stereo channels
• 2-Track In/Out recording facility assignable to
L/R
• 1 Mic input with assignable talkback
to the various outputs
• Dedicated channel, master and stereo
monitoring via 4-LED ladder meters
• HPF-100Hz high pass filters
• +48V Phantom power supply, switchable in
groups of 4 channels
• Mute, PFL/AFL on all channel faders
• Electronically balanced XLR-M outputs with
24 dBu gain
• 2 headphone outputs with independent level
volumes respectively assigned to Aux 1 and
Aux 2 outputs
• PFL headphone output, Control Room output
with independent volume controls
• Gain 10dB – 60dB with 20dB selectable Pad
attenuator
• FBT Precision ™ ultra low noise mic preamps
with +74dB gain and +34dBu gain for lince
sources
• 100 mm dust protected faders
• Superior electronic and mechanical parts
• 4-pin XLR lamp socket to connect a 12V/5W
lamp
• Internal switching power supply
Formula
Formula 328
Formula 248
81
Mixers
Formula
Formula 182 E
82
• 18 Mono channels frame
• 2 stereo channels each with mic and stereo
line inputs with independent level controls
• L/R and Mono main outputs
• 7 Auxiliary sends: 4 pre, 2 pre/post, 1 post
• Channel assignment on 2 audio groups ad L/R
• Built-in 256 selection DSP digital effects
• 3-band EQ with LF and HF Shelving,
sweepable High/Mid on all mono channels
• 3-band EQ with LF and HF Shelving, Mid
peaking on all stereo channels
• 2-Track In/Out recording facility assignable to L/R
• 2 LED ladder meter on each channel for signal
(-30dB) and saturation monitoring
• HPF-100Hz high pass filter
• +48V Phantom power supply
• Mute, PF/AFL on all channel faders
• PFL headphone output, Control Room outputs
with independent level controls
• Electronically balanced XLR-M outputs
• 100 mm dust protected faders
• Superior electronic and mechanical parts
• Internal switching power supply
Mixers
• 14 channels, 6 mono with XLR/line, insert and
4 stereo with XLR-Mic in and L/R line in
• L/R and Mono main outputs
• 4 Auxiliary sends: 2 pre, 2 post
• Built-in amps in PWM technology (Class D)
• Impressive output continuous power
2x850W / 4 Ohm
• TRIPLE built-in digital effect section, for any
kind of effect mixing desired: EFFECT A and B
are available in all channels, feature Multitap
and provide 15 effect banks with 16 variations
programmable by the user. EFFECT C is resident on
the stereo channel 13/14 and also provides guitar
effects. Midi In and Thru for effects control
• Large 4-Line LCD screen displays the operations of
the three effect processors
• Controls include PRESET, EFFECT, TAP/MODIFY
selections
• HPF 100Hz lo-cut filter to suppress low frequency
noise
• 3-band EQ with sweepable semi-parametric MID
• 48V Phantom power supply
• Built-in USB 2.0 input connected to the 2-TRK
SND/RTN
• Mute, PF/AFL on all channel faders
• PFL headphone output, Control Room outputs
with independent level controls
• Electronically balanced XLR-M outputs
• 60 mm dust protected faders
• Internal switch mode power supply
Formula
Formula 143 FXA
83
Formula
ProMaxX
84
Model
Formula 248 - 328
Formula 182 E
Formula 122 E
Formula 143 FXA
Freq. response (20Hz-20kHz)
mic input (+ 40dB gain) on main output
line input ( 0dB gain) on main output
-1 / -0.5dB
-1 / -0.5dB
-1 / -0.5dB
-1 / -0.5dB
-1 / -0.5dB
-1 / -0.5dB
-2 / -0.2dB
-2 / -0.2dB
Distortion (1kHz, 16dBu main out)
THD + Noise (mic + 40dB gain)
THD + Noise (line 0dB gain)
0.0045%
0.0042%
0.0045%
0.0042%
0.0045%
0.0042%
(filter 20Hz-20kHz) 0.004%
(filter 20Hz-20kHz) 0.0045%
CMRR (1kHz)
micro (+ 40dB gain)
micro with PAD (0dB gain)
better 80dB
better 48dB
better 80dB
better 48dB
better 80dB
-
>85dB
-
Crosstalk (1kHz)
adjacent channel
mute shutoff (fader 0dB mark)
fader shutoff (shutoff)
- 90dB
- 94dB
- 92dB
- 90dB
- 94dB
- 92dB
- 90dB
- 94dB
- 92dB
- 95dB
- 94dB
- 92dB
Noise (22Hz-22kHz Bandwidth)
EIN (150ohm source, + 60dB gain)
residual output noise (main out, all levels off)
main mix noise
(all channel routed mix, fader 0dB mark,muted)
- 129dB
- 96dBu
- 86dBu
- 129dB
- 96dBu
- 86dBu
- 129dB
- 96dBu
- 86dBu
- 126dB
- 91dBu
- 80dBu
Graphic Eq. (+/- 15dB gain)
-
-
-
63Hz, 125Hz, 400Hz,
1kHz, 2.5kHz, 6kHz, 12kHz
Equalization (stereo channel, +/- 15dB gain)
High
High Mid
Mid
Low Mid
Mid
Shelving 12kHz
400-12kHz, Q max2.5
35-1kHz, Q max 2.5
Shelving 80Hz
Shelving 12kHz
100-8kHz, Q= 1.41
Shelving 80Hz
Shelving 12kHz
100-8kHz, Q= 1.41
Shelving 80Hz
Shelving 12kHz
peak 2.5kHz
Shelving 80Hz
Equalization (stereo channel, +/- 15dB gain)
High
High Mid
Mid
Low Mid
Mid
Shelving 12kHz
2.5kHz, Q = 1.41
250Hz, Q = 1.41
250Hz, Q = 1.41
Shelving 12kHz
peak 2.5kHz
Shelving 80Hz
Shelving 12kHz
peak 2.5kHz
Shelving 80Hz
Shelving 12kHz
peak 2.5kHz
Shelving 80Hz
Max Input Levels
micro
micro with PAD
tape
Insert line, stereo
+ 14dBu
+ 34dBu
+ 18dBu
+ 18dBu
+ 14dBu
+ 34dBu
+ 18dBu
+ 18dBu
+ 14dBu
+ 18dBu
+ 18dBu
+ 14dBu
+ 18dBu
+ 18dBu
Rated outputs
+ 4dBu
+ 4dBu
+ 4dBu
+ 4dBu
Max output
+ 24dBu
+ 24dBu
+ 24dBu
+ 24dBu
Input impedance
micro
line
stereo
insert in
1.5Kohm bal
20Kohm bal
10Kohm bal
min 4Kohm
1.5Kohm bal
20Kohm bal
10Kohm bal
min 4Kohm
1.5Kohm bal
20Kohm bal
10Kohm bal
min 4Kohm
1.5Kohm bal
20Kohm bal
10Kohm bal
min 4Kohm
Output impedance
main,aux,group
direct out
insert out
headphones
600ohm
600ohm
600ohm
min 32+32ohm
600ohm
600ohm
600ohm
min 32+32ohm
600ohm
600ohm
600ohm
min 32+32ohm
600ohm
600ohm
600ohm
min 32+32ohm
Digital Effects Processor
frequency response (20-20kHz)
number of effects
no
-
Yes
- 3dB
256
Yes
- 3dB
256
Yes
-
Triple Internal Processors (A,B,C)
24 bit conversion, sampling frequency
Frequency response (20-20kHz)
A & B programs
C programs
-
-
-
Built-in amps
Output power
Input sensitivity
no
no
no
Power Supply
85-260 Vac 50/60Hz
85-260 Vac 50/60Hz
85-260 Vac 50/60Hz
120Vac /230Vac50/60Hz
2000VA peak
Net Dimensions mm/inch
(LxAxP)
248 - 1066x165x570 / 42x6.5x22.4
328 - 1274x165x570 / 50.1x6.5x22.4
804x124x410
31.6x4.8x16.1
596x124x410
23.5x4.8x16.1
570x180x516
22.4x7x20.3
14 / 30.8
10 / 22
19 / 41.9
845x235x550
33.3x9.2x 21.67
680x235x500
22.8x9.25x19.7
650x270x 570/
25.5x10.6x22.4
17 / 37.5
13 / 28.6
21 / 46.3
Net Weight
Transport dimensions
(LxAxP)
Transport weight
Kg/Lb 248 - 24 / 52.9 328 - 28 / 61.7
mm/inch 248 - 1115x300x665
328 - 1330x300x665
Kg/Lb 248 - 30 / 328 - 34.5
48KHz
-3dB
240
320
2x850W @230Vac Imp. 4 2x550W
@230Vac Imp. 8 Ohm
+4dBu with vol. at 0dB
MT-C 152
36062
Nylon cover
Mitus 152
V 67
33831
Nylon cover
Mitus 115
V 66
33830
Nylon cover
Mitus 112
V 70
33834
Nylon cover
Mitus 210M
MT-C 218
36064
Nylon cover
MT-CH 218
37066
Nylon cover
V 69
33833
Nylon cover
MT-CH 121
37067
Nylon cover
V 68
33832
Nylon cover
MT-CH 118
37068
Nylon cover
Mitus 218
Mitus 218
with wheels
Mitus 121S
Mitus 121S
with wheels
Mitus 118S
Mitus 118S
with wheels
VV-C 212
36067
Nylon cover
Verve 212
VV-C 115
36068
Nylon cover
Verve 115
VV-C 112
36069
Nylon cover
Verve 112
VV-C 110
36070
Nylon cover
Verve 110
VV-C 108
36071
Nylon cover
Verve 108
VV-C 115M
36072
Nylon cover
Verve 115M
VV-C 112M
36073
Nylon cover
Verve 112M
Accessories
MT-C 215
36063
Nylon cover
Mitus 215
85
VT-C 604
36122
Nylon cover
Vertus CLA 604
VT-C 114
37145
Nylon cover
Vertus VT-SC 114
VT-C 59
37146
Nylon cover
Vertus VT-SC 59
VT-C 208
36123
Nylon cover
Vertus CLA 208
SM-C 12
36065
Nylon cover
StageMaxX 12
V 72
34721
Nylon cover
SL-CH 18S
37051
V 71
34720
Nylon cover
SL-CH 15S
37052
Nylon cover
SL-C 12S
35958
Nylon cover
SUBLine 15 SA
Subline 15 SA
with wheels
SUBLine 12 SA
SUBLine 18 SA
Nylon cover
Subline 18 SA
with wheels
V 33
15777
Nylon cover
V 29
10186
Nylon cover
V 56
29486
Nylon cover
HM-CH 100
37049
Nylon cover
HiMaxX 60
EvoMaxX 6
HiMaxX 40
EvoMaxX 4
HiMaxX 100 SA
HiMaxX 100 SA
with wheels
V 64
33326
Nylon cover
ProMaxX 14 - ProMaxX 12
V 63
33325
Nylon cover
ProMaxX 10
V 65
33327
Nylon cover
ProMaxX 15 SA
PM-CH 15S
37050
Nylon cover
ProMaxX 15 SA with wheels
V 33
15777
Nylon cover
EvoMaxX 6
V 29
10186
Nylon cover
EvoMaxX 4
V 30
13349
Nylon cover
EvoMaxX 2
V 31
13350
Nylon cover
EvoMaxX 9 SA
V 38
18614
Nylon cover
Jolly 15 - Jolly 12
V 37
18613
Nylon cover
Jolly 8
V 36
18612
Nylon cover x 2
Jolly 5
V44
23373
Nylon cover
Amico 10 USB
MT-F 206
31805
MT-F 212
31804
MT-J 206
31806
MT-B 206
31888
Flying bar
Flying bar
Joint Bar
Metal Base to ground 206 Cluster bracket for 2
LA/L array or stack on 118 Mitus 206 LA mounted
SA/S or 121 SA/S subs
on Mitus 212 FSA
Mitus 206 LA/L
Mitus 212 FSA/FS
Mitus 212 FSA/FS
with Mitus 206LA/L
Mitus 206 on Mitus 118 Mitus 206 LA/L
or Mitus 121
MD-FSAT
25391
MD-FSUB
26214
MD-WB
29309
MD-B
25393
Flying bar for
rigging Modus
Sat
Flying bar for
rigging Modus
Sub
Stand base to tilt
Modus 15/40 on
Modus Sub
Modus
Modus
VT-S 604
35723 / 37044
MD-TSAT
26213
MT-S 206
33324
MD-TSUB
25394
SPL-4/2me
26530
Trolley for
Stand base to
2 x Modus Sat
tilt Modus 15 +
Modus 40 on
theatre stage f.o.h.
Trolley for
2 x Modus Sub
Splitter panel
for Modus Line
Array System
Modus
Modus
Modus
Modus
Modus
VT-W 604
35722 / 37043
VT-DS 604
37053 / 37054
VT-SC59 604
36879 / 36883
VT-SC114 604
37041 / 37042
VV-CO 108
36080
VV-W 108
36156
Stand Adapter
ø 35mm
grey / white
Directional wall
mount bracket
grey / white
Directional stand
adapter
grey / white
Stand column
H59 cm
grey / white
Stand column
H114 cm
grey / white
Adjustable
truss clamp
Directional
wall mount
bracket
Vertus CLA 604
Vertus CLA 604
Vertus CLA 604
Vertus CLA 604
Vertus CLA 604
Verve 108
Verve 108
SJ-5 Black
18522
SJ-5 White
18525
AJ-8 Black
18570
AJ-5 Black
18532
Directional wall
mount bracket
Directional wall
mount bracket
Directional
wall mount
Adapter from ø 35 mm
to ø 25 mm
MS 30BK adapter for
fixing purposes
Jolly 8
Jolly 5
Jolly 5
Jolly 8
Jolly 5
MS 30BK
06076
SJ-5C White
18526
SJ-8T Black
18569
SJ-5T Black
18527
Tripod speaker
stand
White metal frame for
ceiling/wall installation
Adjustable metal “T”
stand for No. 2
Adjustable metal “T”
stand for No. 2
Jolly 5
Jolly 5
Jolly 8
Jolly 5
VV-U 115
36074
VV-U 112
36075
VV-U 110
36076
VV-U 108
36077
VV-U 115M
36078
VV-U 112M
36079
Wall metal bracket
to mount in
horizontal position
Wall metal bracket
to mount in
horizontal position
Wall metal bracket
to mount in
horizontal position
Wall metal bracket
to mount in
horizontal position
Wall metal bracket
to mount in
horizontal position
Wall metal bracket
to mount in
horizontal position
Verve 115
Verve 112
Verve 110
Verve 108
Verve 115M
Verve 112M
SM-U 12
36066 / 36735
SM-S 12
37099
BOX 104
15771
BOX 105
15772
BOX 100
10187
BOX 101
10188
Wall metal bracket to Metal bracket with
mount in horizontal top-hat speaker
position grey / white stand socket
Wall metal bracket
to mount in
horizontal position
Wall metal bracket
to mount in
vertical position
Wall metal bracket
to mount in
horizontal position
Wall metal bracket
to mount in
vertical position
StageMaxX 12
HiMaxX 60
EvoMaxx 6
HiMaxX 60
EvoMaxx 6
HiMaxX 40
EvoMaxx 4
HiMaxX 40
EvoMaxx 4
StageMaxX 12
BOX 128
33329
BOX 127
33328
BOX 102
13351
BOX 103
13352
Wall metal bracket
to mount in
horizontal position
Wall metal bracket
to mount in
horizontal position
Wall metal bracket
to mount in
horizontal position
Wall metal bracket
to mount in
horizontal position
ProMaxX 14
ProMaxX 12
ProMaxX 10
EvoMaxX 2
EvoMaxX 9
BOX 112
18602
SJ-8U Black
18568
SJ-8U White
23120
SJ-5U Black
18523
SJ-5U White
18524
Wall metal bracket
to mount in
horizontal position
Wall metal bracket
to mount in
horizontal position
Wall metal bracket
to mount in
horizontal position
Wall metal bracket
to mount in
horizontal position
Wall metal bracket
to mount in
horizontal position
Jolly 15
Jolly 12
Jolly 8
Jolly 8
Jolly 5
Jolly 5
Accessories
SJ-8 Black
18567
87
KWM 560
32890
KMS 300
32884
KMS 325
32886
KMS 210
32887
KMS 220
32888
FMS 220
36723
Adjustable wall mount Aluminium speaker
heavy duty steel
stand
speaker bracket
Air-Cushioned
Speaker stand with
top adapter
35 to 25 mm
Adjustable speaker
pole
ø 35 mm
Adjustable speaker
pole
with M20 thread
Adjustable speaker
pole with M20
thread. White
Avalaible for
all Series
Avalaible for
all Series
Avalaible for
all Series
Avalaible for
all Series
Avalaible for
all Series
Avalaible for
all Series
KW-HM100
30423
4 Wheels Kit: 2 with brake 80 mm ø
KBW-1004S
25197
4 Wheels Kit with brake 100 mm ø
HiMaxX 100 SA
SUBLine 15 SA
ProMaxX 15 SA
Mitus 218 - Mitus 118
Mitus 121
SUBLine 18
FK 206-6
33933
Flight-case for 6
Mitus 206 L/LA
FK 206-4
34911
Flight-case for 4
Mitus 206 L/LA
FK 212-2
33931
Flight-case for 2
Mitus 212 FSA
FK 121-1
34690
Flight-case for 1
Mitus 121 S/SA
FK 118-1
33932
Flight-case for 1
Mitus 118 SA
FK 210-2
34719
Flight-case for 2
Mitus 210 M/MA
FK 12W
05370
FK 8W
05373
FK 6
05369
FK 4
05368
Flight-case 12 HU,
protection panels (front+back),
depth 43cm w/wheels
Flight-case 8 HU,
protection panels (front+back),
depth 43cm w/wheels
Flight-case 6 HU,
protection panels (front+back),
depth 43cm
Flight-case 4 HU,
protection panels (front+ back),
depth 43cm
Symbol
Symbol
Symbol
Symbol
FK 328
28770
Flight-case
Formula 328
PL-C 4B
12731
Blank Panel 4 Rack Units
Symbol
FK 248
28771
Flight-case
Formula 248
PL-C 3B
12730
Blank Panel 3 Rack Units
Symbol
FK 182
28772
Flight-case
Formula 182E
PL-C 2B
12729
Blank Panel 2 Rack Units
Symbol
PL-C 1B
12728
Blank Panel 1 Rack Units
Symbol
FBT Elettronica SpA
has the right to amend products
and specifications without notice.
ALPSTM, B&C and NeutrikTM are the trademarks
of their respective owners.
Graphics
Studio Conti
Photography
Giuseppe Saluzzi
Printing
Tecnostampa - Loreto
Date of printing: October 2012
Professional audio equiPment
FBT Elettronica SpA
62019 Recanati (MC) - Italy
Tel: +39 071 750591
Fax: +39 071 7505920
info@fbt.it - www.fbt.it
(International Headquarter - Factory)
FBT Audio (UK) Ltd
South Croydon, Surrey, UK
Tel: 0844 310 4592
Fax: 0844 310 4594
info@fbtaudio.co.uk
www.fbtaudio.co.uk
FBT USA, Inc.
Palm Coast, Florida, US
Tel: 800 333 9383
fbtusa@sbcglobal.net
general catalogue 2012•2013
English
Distributed by
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising