Disklavier Controller

Disklavier Controller
Application for iPhone/iPod touch/iPad
Disklavier Controller
How to use DisklavierTV™ on Disklavier Controller
For Disklavier Mark IV Users
How to use DisklavierTV™ on Disklavier Controller
For Disklavier Mark IV Users
Introduction
• To activate DisklavierTV, please refer to “DisklavierTV User’s Guide - For Disklavier Mark IV Users”.
• About Disklavier Controller, please refer to “Disklavier Controller User’s Guide”.
DisklavierTV Playback
1 Confirm that DisklavierTV is activated on your Disklavier.
2 Tap on [Select] in the toolbar.
3 Tap on [RemoteLive].
Note: If DisklavierTV is not activated, [RemoteLive] should not appear.
Tapping on the screen shows the song control panel.
How to use DisklavierTV on Disklavier Controller
1
4 Using the computer, enter the following URL into your browser:
4wrd.it/DisklavierTV/
5 Start playing back any video on the website.
Your Disklavier starts to receive the data and playback.
playing back the video, then tap on [Back] in the song control panel to return to
6 Stop
source selection.
Note:Playback of your piano may continue for a while even after you have stopped playing back the
video content. This is not a malfunction.
How to use DisklavierTV on Disklavier Controller
2
Adjusting the Main Volume
You can adjust the overall volume.
How to use DisklavierTV on Disklavier Controller
3
Adjusting the Audio Volume Balance
You can adjust the balance between the audio volume and the sound of your acoustic piano.
1 Tap on [Audio] in the song control panel.
The [Audio Balance] pop-up appears.
2 Tap on any button to adjust the volume of the audio.
[◄]
Audio volume decreases by 1.
[►]
Audio volume increases by 1.
[10◄]
Audio volume decreases by 10.
[►10]
Audio volume increases by 10.
[Reset]
Audio volume reverts to its default value (100).
Audio volume balance can be adjusted in a range of 000 to 127.
3 Tap on [OK] to return to the song control panel.
How to use DisklavierTV on Disklavier Controller
4
Adjusting the Depth of the Sustain Pedal
You can adjust the depth of the sustain pedal.
1 Tap on [Pedal] in the song control panel.
The [Sustain Pedal Adjust] pop-up appears.
2 Tap on [◄] or [►] to change setting while listening to the piano playback.
Increasing this value increases the effect of the sustain pedal, and decreasing this value decreases the effect
of the sustain pedal.
The setting range varies depending on the model and its condition.
3 Tap on [OK] to return to the song control panel.
How to use DisklavierTV on Disklavier Controller
5
P.O.Box 1, Hamamatsu, 430-8650 Japan
Copyright © 2013 Yamaha Corporation
Apr-13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement