iToolsBro_HA021677_5 (Page 6)

iToolsBro_HA021677_5 (Page 6)
EUROTHERM FLEXIBLE SOLUTIONS
iTools
SOFTWARE TOOLS...
...a versatile suite of software
iTools
Configuration, Data Logging, Communications and Monitoring Software
● Configuration with Wizards to
help the user
● Graphical wiring editor
● Cloning
● Terminal wiring visualisation
● Data logging and trending
● Setpoint program editor
● Process monitoring
● OPC Server
● Remote connection
iTools is a versatile suite of software tools to allow configuration and monitoring of all Eurotherm® 2000 and 3000 Series
Controllers and the T630 Process Controller. It also provides runtime monitoring of the 6000 Series graphical recording and
data management units. It is capable of editing, storing and ‘cloning’ complete controller configurations as well as setting up
data logging, process monitoring and Ethernet and modem connections.
GRAPHICAL WIRING EDITOR
●
Simple ‘Drag & Drop’ wiring
●
Pre-configured function blocks
●
Access to real time monitoring
Configuring Eurotherm
controllers has never been
easier with the Graphical Wiring
Editor within iTools. This
intuitive tool allows the user to
configure 3500, Mini8®
Controller, 2604 and 2704
controllers, using a simple drag
and drop graphical interface. By
using pre-configured function
blocks within the Graphical
Wiring Editor, the user can
develop advanced control
applications in minutes.
TERMINAL WIRING
Terminal Wiring allows the user to
view the rear terminal panel of the
selected device, and to determine
the hardware setup. When online this
view automatically updates to reflect
the current instrument configuration.
When developing a configuration
offline, this view allows the user to
define the requires device I/O.
USER PAGES
The User Page
Editor is used to
set up custom
controller displays.
Various display styles are
supported, including bargraph,
numerical and custom messages.
It shows a scrollable sequence of
parameter values in a variety of
display styles.
VIEW BUILDER/RUNNER
●
Customised screens
●
Import background images
●
User buttons to switch between screens
●
Live data monitoring
●
Operator interface to controls
View Builder allows users to create PC based customised
screens for simple process monitoring, commissioning and
diagnostics to suit their process needs.
OPC SCOPE
OPC Scope is a separate utility that allows trending, data
logging and Dynamic Data Exchange (DDE). It is an OPC
explorer program that can connect to any OPC server that is in
the Windows registry.
Both data logging and trending are available and the user can
trend and view live data, with a scaleable time axis between 1
minute and 1 month. This utility also offers a Historical Review
mode and data can be logged onto the PC hard disk, from
which it may be retrieved and analysed in an Excel spreadsheet.
Once a View Builder screen has been created, the View Runner
shows live values from the process with interactive buttons as an
intuitive operator interface.
DEVICE PANEL
Clicking on this Views Toolbar
item causes a front panel faceplate of
the selected device to appear in the main
iTools frame. For many instruments types, any
digital displays and/or push buttons etc. which ‘appear’ on
the device itself, are mimicked on this Device Panel View,
allowing the device to be ‘operated’ via iTools (instead of at
the panel) if desired.
FLASH MEMORY EDITOR
The Flash Memory
Editor allows the
editing of five tabbed
lists. These are used
for user messages and
recipes.
PROGRAMMING
●
Simple setup of setpoint profiles
●
Store, retrieve and download program files
●
Unlimited program storage
●
Online and offline editing
The Setpoint Program Editor within iTools provides a simple
method of configuring setpoint profiles and programmable
event outputs. Programs can be edited live - online with the
controller, or offline - for download after editing or storage
of the profile. Storage of profiles is limited only by the
amount of disk space available on the PC.
WIZARDS
Configuration wizards are provided to simplify the configuration of a number of Eurotherm controllers. The user is
provided with a number of pages giving a step by step configuration process with interactive help and graphical
demonstrations of the different options. Tools can be provided to allow advanced users and OEMs to create their
own wizards.
The wizards can either run stand-alone or within
iTools and will be automatically offered when
the instrument is first loaded into iTools.
DEVICE AND WATCH RECIPE EDITOR
The Device
Recipe Editor
is used to
configure
a recipe
parameter list
to be stored
and used
within the
controller.
The watch window allows the user to
monitor defined parameters from
different browse lists.
PARAMETER EXPLORER
The parameter explorer window shows the parameters
associated with the current iTools browse list. This list is
continuously synchronised with the user’s browsing activity in
the iTools browse panel tree.
iTools Engineering Studio
Versatile suite of software tools designed to simplify the configuration
and visualisation of Eurotherms range of controllers and data management
Editors include
GRAPHICAL WIRING
TERMINAL WIRING
USER PAGES
PROGRAMMER
PARAMETER EXPLORER
DEVICE RECIPE EDITOR
CONFIGURATION WIZARDS
CLONE FUNCTIONALITY
visualisation using Eurotherms embedded OPC server includes
DEVICE PANELS
OPCSCOPE OPC CLIENT
VIEW RUNNER
WATCH RECIPE WINDOW
REMOTE CONNECTION
OPC SERVER
The OPC® Server can
connect to remote
instrumentation via
the internet and read
and write values to
supervisory packages
such as Wonderware®
or LabVIEW™.
6000 Series
Recorders
7000 Series
Thyristors
Mini8®
Controller
●
OPC Data Access 2 server
●
Supports
● Modbus TCP
● Modbus RTU over serial including modem
● Remote access
– OPC using Microsoft® DCOM
– Modbus TCP (including through Firewalls)
●
Modbus TCP to Modbus serial gateway
● Remote PC access internet/intranet to iTools
OPC server
●
Automatic network scanning and device detection
●
Can integrate any Modbus RTU communicating device
●
Includes advanced communication diagnosic and
monitoring tools
2000 Series
Controllers
3000 Series
Controllers
Order Code
2
1
4
3
5
6
OPC Server
4
7
ITOOLS
Basic Product
ITools
1
Softwae tools
iTools
CD
Supplied on CD
XXXXXX None standard
Standard
Open OPC Server for use with 3rd party software
(e.g. Wonderware)
5
Trending & Logging (OPC scope)
XXX
TREND
None
Trend displays enabled (OPC Scope)
Configuration Kit
2
NONE
3000CK
3000CC
3500IR
2000UK
2000EU
2000US
2500NC
2500UK
STD
OPC
None (CD only)
3000 Series (with clip and cable)
3000 Series clip only with cable (no PSU)
3500 Series infra red port (UK power connector)
2000 Series (UK power connector)
2000 Series (European power connector)
2000 Series (USA power connector)
2500 Series (no power connector)
2500 Series (UK power connector)
3
View Builder
6
XXX
VIEW
None
View Builder enabled
Configuration Software
7
STD
Enabled (includes integrated Setpoint Programmer Editor)
NOCONF Disabled
LMTD
Limited – no config access to instrument
XXX
SPE
Standalone Setpoint Programming Editor
None
Standalone setpoint programmer editor
Eurotherm: International sales and service
Understanding and providing local support is a key part of Eurotherm's business. Complementing worldwide Eurotherm offices are a whole
range of partners and a comprehensive technical support team… a soothing melody to ensure you get a service you will want to go back to.
AUSTRALIA Sydney
Eurotherm Pty. Ltd.
T (+61 2) 9838 0099
F (+61 2) 9838 9288
E [email protected]
AUSTRIA Vienna
Eurotherm GmbH
T (+43 1) 7987601
F (+43 1) 7987605
E [email protected]
BELGIUM & LUXEMBOURG Moha
Eurotherm S.A/N.V.
T (+32) 85 274080
F (+32) 85 274081
E [email protected]
BRAZIL Campinas-SP
Eurotherm Ltda.
T (+5519) 3707 5333
F (+5519) 3707 5345
E [email protected]
DENMARK Copenhagen
Eurotherm Danmark AS
T (+45 70) 234670
F (+45 70) 234660
E [email protected]
FINLAND Abo
Eurotherm Finland
T (+358) 22506030
F (+358) 22503201
E [email protected]
FRANCE Lyon
Eurotherm Automation SA
T (+33 478) 664500
F (+33 478) 352490
E [email protected]
GERMANY Limburg
Eurotherm Deutschland GmbH
T (+49 6431) 2980
F (+49 6431) 298119
E [email protected]
HONG KONG & CHINA
Eurotherm Limited North Point
T (+85 2) 28733826
F (+85 2) 28700148
E [email protected]
Guangzhou Office
T (+86 20) 8755 5099
F (+86 20) 8755 5831
E [email protected]
Beijing Office
T (+86 10) 6567 8506
F (+86 10) 6567 8509
E [email protected]
Shanghai Office
T (+86 21) 6145 1188
F (+86 21) 6145 1187
E [email protected]
Eurotherm is also represented in the following
countries:
SPAIN Madrid
Eurotherm España SA
T (+34 91) 6616001
F (+34 91) 6619093
E [email protected]
SWEDEN Malmo
Eurotherm AB
T (+46 40) 384500
F (+46 40) 384545
E [email protected]
SWITZERLAND Wollerau
Eurotherm Produkte (Schweiz) AG
T (+41 44) 7871040
F (+41 44) 7871044
E [email protected]
INDIA Chennai
Eurotherm India Limited
T (+91 44) 24961129
F (+91 44) 24961831
E [email protected]
UNITED KINGDOM Worthing
Eurotherm Limited
T (+44 1903) 268500
F (+44 1903) 265982
E [email protected]
IRELAND Dublin
Eurotherm Ireland Limited
T (+353 1) 4691800
F (+353 1) 4691300
E [email protected]
www.eurotherm.co.uk
U.S.A. Leesburg VA
Eurotherm Inc.
T (+1 703) 443 0000
F (+1 703) 669 1300
E [email protected]
ITALY Como
Eurotherm S.r.l
T (+39 31) 975111
F (+39 31) 977512
E [email protected]
www.eurotherm.com
ED53
KOREA Seoul
Eurotherm Korea Limited
T (+82 31) 2738507
F (+82 31) 2738508
E [email protected]
Algeria
Azerbaijan
Bahrain
Bangladesh
Benin
Bosnia and Herzegovina
Bulgaria
Burkina Faso
Cameroon
Canada
Czech Republic
Egypt
Georgia
Greece
Guinea-Conakry
Hungary
Indonesia
Iran
Iraq
Israel
Ivory Coast
Japan
Jordan
Kazakhstan
Kenya
Kuwait
Latvia
Lithuania
Malaysia
Mali
Mexico
New Zealand
Niger
Nigeria
Oman
Pakistan
Philippines
Puerto Rico
Qatar
Romania
Russia
Saudi Arabia
Serbia and Montenegro
Singapore
Slovak Republic
Slovenia
South Africa
Sri Lanka
Thailand
Togo
Tunisia
Turkey
Turkmenistan
UAE
Ukraine
Uzbekistan
Represented by:
NETHERLANDS Alphen a/d Rijn
Eurotherm B.V.
T (+31 172) 411752
F (+31 172) 417260
E [email protected]
NORWAY Oslo
Eurotherm A/S
T (+47 67) 592170
F (+47 67) 118301
E [email protected]
POLAND Katowice
Invensys Eurotherm Sp z o.o.
T (+48 32) 2185100
F (+48 32) 2177171
E [email protected]
© Copyright Eurotherm Limited 2007
Invensys, Eurotherm, the Eurotherm logo, Chessell, EurothermSuite, Mini8, Eycon, Eyris and Wonderware are trademarks of Invensys plc, its subsidiaries and affiliates.
All other brands may be trademarks of their respective owners.
All rights are strictly reserved. No part of this document may be reproduced, modified, or transmitted in any form by any means, nor may it be stored in a retrieval system
other than for the purpose to act as an aid in operating the equipment to which the document relates, without the prior written permission of Eurotherm limited.
Eurotherm Limited pursues a policy of continuous development and product improvement. The specifications in this document may therefore be changed without notice.
The information in this document is given in good faith, but is intended for guidance only.
Eurotherm Limited will accept no responsibility for any losses arising from errors in this document.
Part No. HA026177 Issue 5
iTools Brochure
Printed on
recycled paper
in England 03.07
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement